diff options
Diffstat (limited to 'include')
| -rw-r--r-- | include/linux/iio/consumer.h | 18 | ||||
| -rw-r--r-- | include/linux/iio/iio.h | 20 | ||||
| -rw-r--r-- | include/linux/iio/types.h | 1 | ||||
| -rw-r--r-- | include/linux/mfd/88pm886.h | 58 | ||||
| -rw-r--r-- | include/linux/platform_data/touchscreen-s3c2410.h | 22 | ||||
| -rw-r--r-- | include/uapi/linux/iio/types.h | 5 |
6 files changed, 92 insertions, 32 deletions
diff --git a/include/linux/iio/consumer.h b/include/linux/iio/consumer.h index 6a4479616479..a38b277c2c02 100644 --- a/include/linux/iio/consumer.h +++ b/include/linux/iio/consumer.h @@ -382,6 +382,24 @@ int iio_read_channel_scale(struct iio_channel *chan, int *val, int *val2); /** + * iio_multiply_value() - Multiply an IIO value + * @result: Destination pointer for the multiplication result + * @multiplier: Multiplier. + * @type: One of the IIO_VAL_* constants. This decides how the @val and + * @val2 parameters are interpreted. + * @val: Value being multiplied. + * @val2: Value being multiplied. @val2 use depends on type. + * + * Multiply an IIO value with a s64 multiplier storing the result as + * IIO_VAL_INT. This is typically used for scaling. + * + * Returns: + * IIO_VAL_INT on success or a negative error-number on failure. + */ +int iio_multiply_value(int *result, s64 multiplier, + unsigned int type, int val, int val2); + +/** * iio_convert_raw_to_processed() - Converts a raw value to a processed value * @chan: The channel being queried * @raw: The raw IIO to convert diff --git a/include/linux/iio/iio.h b/include/linux/iio/iio.h index d11668f14a3e..872ebdf0dd77 100644 --- a/include/linux/iio/iio.h +++ b/include/linux/iio/iio.h @@ -271,14 +271,14 @@ struct iio_chan_spec { unsigned int num_ext_scan_type; }; }; - long info_mask_separate; - long info_mask_separate_available; - long info_mask_shared_by_type; - long info_mask_shared_by_type_available; - long info_mask_shared_by_dir; - long info_mask_shared_by_dir_available; - long info_mask_shared_by_all; - long info_mask_shared_by_all_available; + unsigned long info_mask_separate; + unsigned long info_mask_separate_available; + unsigned long info_mask_shared_by_type; + unsigned long info_mask_shared_by_type_available; + unsigned long info_mask_shared_by_dir; + unsigned long info_mask_shared_by_dir_available; + unsigned long info_mask_shared_by_all; + unsigned long info_mask_shared_by_all_available; const struct iio_event_spec *event_spec; unsigned int num_event_specs; const struct iio_chan_spec_ext_info *ext_info; @@ -779,7 +779,7 @@ static inline void *iio_device_get_drvdata(const struct iio_dev *indio_dev) * them safe for use with non-coherent DMA. * * A number of drivers also use this on buffers that include a 64-bit timestamp - * that is used with iio_push_to_buffer_with_ts(). Therefore, in the case where + * that is used with iio_push_to_buffers_with_ts(). Therefore, in the case where * DMA alignment is not sufficient for proper timestamp alignment, we align to * 8 bytes instead. */ @@ -794,7 +794,7 @@ static inline void *iio_device_get_drvdata(const struct iio_dev *indio_dev) * @name: identifier name of the buffer * @count: number of elements in the buffer * - * Declares a buffer that is safe to use with iio_push_to_buffer_with_ts(). In + * Declares a buffer that is safe to use with iio_push_to_buffers_with_ts(). In * addition to allocating enough space for @count elements of @type, it also * allocates space for a s64 timestamp at the end of the buffer and ensures * proper alignment of the timestamp. diff --git a/include/linux/iio/types.h b/include/linux/iio/types.h index ad2761efcc83..34eebad12d2c 100644 --- a/include/linux/iio/types.h +++ b/include/linux/iio/types.h @@ -70,6 +70,7 @@ enum iio_chan_info_enum { IIO_CHAN_INFO_ZEROPOINT, IIO_CHAN_INFO_TROUGH, IIO_CHAN_INFO_CONVDELAY, + IIO_CHAN_INFO_POWERFACTOR, }; #endif /* _IIO_TYPES_H_ */ diff --git a/include/linux/mfd/88pm886.h b/include/linux/mfd/88pm886.h index 85eca44f39ab..38892ba7b8a4 100644 --- a/include/linux/mfd/88pm886.h +++ b/include/linux/mfd/88pm886.h @@ -10,6 +10,7 @@ #define PM886_IRQ_ONKEY 0 #define PM886_PAGE_OFFSET_REGULATORS 1 +#define PM886_PAGE_OFFSET_GPADC 2 #define PM886_REG_ID 0x00 @@ -70,6 +71,63 @@ #define PM886_LDO_VSEL_MASK 0x0f #define PM886_BUCK_VSEL_MASK 0x7f +/* GPADC enable/disable registers */ +#define PM886_REG_GPADC_CONFIG(n) (n) + +#define PM886_GPADC_VSC_EN BIT(0) +#define PM886_GPADC_VBAT_EN BIT(1) +#define PM886_GPADC_GNDDET1_EN BIT(3) +#define PM886_GPADC_VBUS_EN BIT(4) +#define PM886_GPADC_VCHG_PWR_EN BIT(5) +#define PM886_GPADC_VCF_OUT_EN BIT(6) +#define PM886_GPADC_CONFIG1_EN_ALL \ + (PM886_GPADC_VSC_EN | \ + PM886_GPADC_VBAT_EN | \ + PM886_GPADC_GNDDET1_EN | \ + PM886_GPADC_VBUS_EN | \ + PM886_GPADC_VCHG_PWR_EN | \ + PM886_GPADC_VCF_OUT_EN) + +#define PM886_GPADC_TINT_EN BIT(0) +#define PM886_GPADC_PMODE_EN BIT(1) +#define PM886_GPADC_GPADC0_EN BIT(2) +#define PM886_GPADC_GPADC1_EN BIT(3) +#define PM886_GPADC_GPADC2_EN BIT(4) +#define PM886_GPADC_GPADC3_EN BIT(5) +#define PM886_GPADC_MIC_DET_EN BIT(6) +#define PM886_GPADC_CONFIG2_EN_ALL \ + (PM886_GPADC_TINT_EN | \ + PM886_GPADC_GPADC0_EN | \ + PM886_GPADC_GPADC1_EN | \ + PM886_GPADC_GPADC2_EN | \ + PM886_GPADC_GPADC3_EN | \ + PM886_GPADC_MIC_DET_EN) + +/* No CONFIG3_EN_ALL because this is the only bit there. */ +#define PM886_GPADC_GND_DET2_EN BIT(0) + +/* GPADC channel registers */ +#define PM886_REG_GPADC_VSC 0x40 +#define PM886_REG_GPADC_VCHG_PWR 0x4c +#define PM886_REG_GPADC_VCF_OUT 0x4e +#define PM886_REG_GPADC_TINT 0x50 +#define PM886_REG_GPADC_GPADC0 0x54 +#define PM886_REG_GPADC_GPADC1 0x56 +#define PM886_REG_GPADC_GPADC2 0x58 +#define PM886_REG_GPADC_VBAT 0xa0 +#define PM886_REG_GPADC_GND_DET1 0xa4 +#define PM886_REG_GPADC_GND_DET2 0xa6 +#define PM886_REG_GPADC_VBUS 0xa8 +#define PM886_REG_GPADC_GPADC3 0xaa +#define PM886_REG_GPADC_MIC_DET 0xac +#define PM886_REG_GPADC_VBAT_SLP 0xb0 + +/* VBAT_SLP is the last register and is 2 bytes wide like other channels. */ +#define PM886_GPADC_MAX_REGISTER (PM886_REG_GPADC_VBAT_SLP + 1) + +#define PM886_GPADC_BIAS_LEVELS 16 +#define PM886_GPADC_INDEX_TO_BIAS_uA(i) (1 + (i) * 5) + struct pm886_chip { struct i2c_client *client; unsigned int chip_id; diff --git a/include/linux/platform_data/touchscreen-s3c2410.h b/include/linux/platform_data/touchscreen-s3c2410.h deleted file mode 100644 index bf8d3b9d7c6a..000000000000 --- a/include/linux/platform_data/touchscreen-s3c2410.h +++ /dev/null @@ -1,22 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * Copyright (c) 2005 Arnaud Patard <arnaud.patard@rtp-net.org> -*/ - -#ifndef __TOUCHSCREEN_S3C2410_H -#define __TOUCHSCREEN_S3C2410_H - -struct s3c2410_ts_mach_info { - int delay; - int presc; - int oversampling_shift; - void (*cfg_gpio)(struct platform_device *dev); -}; - -extern void s3c24xx_ts_set_platdata(struct s3c2410_ts_mach_info *); -extern void s3c64xx_ts_set_platdata(struct s3c2410_ts_mach_info *); - -/* defined by architecture to configure gpio */ -extern void s3c24xx_ts_cfg_gpio(struct platform_device *dev); - -#endif /*__TOUCHSCREEN_S3C2410_H */ diff --git a/include/uapi/linux/iio/types.h b/include/uapi/linux/iio/types.h index 3eb0821af7a4..6d269b844271 100644 --- a/include/uapi/linux/iio/types.h +++ b/include/uapi/linux/iio/types.h @@ -52,6 +52,7 @@ enum iio_chan_type { IIO_COLORTEMP, IIO_CHROMATICITY, IIO_ATTENTION, + IIO_ALTCURRENT, }; enum iio_modifier { @@ -108,6 +109,10 @@ enum iio_modifier { IIO_MOD_ROLL, IIO_MOD_LIGHT_UVA, IIO_MOD_LIGHT_UVB, + IIO_MOD_RMS, + IIO_MOD_ACTIVE, + IIO_MOD_REACTIVE, + IIO_MOD_APPARENT, }; enum iio_event_type { |