| Age | Commit message (Collapse) | Author |
|---|
|
batadv_tp_sender_cleanup() was calling timer_delete_sync() followed by
timer_delete() to guard against the timer handler re-arming itself between
the two calls. This double-deletion hack relied on the sending status being
set to 0 to suppress re-arming.
Replace both calls with a single timer_shutdown_sync(). This function both
waits for any running timer callback to complete (like timer_delete_sync())
and permanently disarms the timer so it cannot be re-armed afterwards,
making re-arming prevention unconditional and self-documenting.
The re-arming property is also required because otherwise:
1. context 0 (batadv_tp_recv_ack()) checks in
batadv_tp_reset_sender_timer() if sending is still 1 -> it is
2. context 1 changes in batadv_tp_sender_shutdown() sending to 0 and in
this process forces the kthread to stop timer in
batadv_tp_sender_cleanup()
3. context 0 continues in batadv_tp_reset_sender_timer() and rearms the
timer -> but the reference for it is already gone
Cc: stable@kernel.org
Fixes: 33a3bb4a3345 ("batman-adv: throughput meter implementation")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
|
|
batadv_frag_skb_buffer() is called by batadv_batman_skb_recv() when a
BATADV_UNICAST_FRAG packet is received. Once all fragments are collected
and the packet is reassembled, batadv_recv_frag_packet() calls
batadv_batman_skb_recv() again to process the defragmented payload.
A malicious sender can craft a BATADV_UNICAST_FRAG packet whose reassembled
payload is itself a BATADV_UNICAST_FRAG packet (matryoshka-style nesting).
Each nesting level recurses through batadv_batman_skb_recv() without bound,
growing the kernel stack until it is exhausted.
Since refragmentation or fragments in fragments are not actually allowed,
discard all packets which are still BATADV_UNICAST_FRAG packets after the
defragmentation process.
Cc: stable@kernel.org
Fixes: 610bfc6bc99b ("batman-adv: Receive fragmented packets and merge")
Reported-by: Yuan Tan <yuantan098@gmail.com>
Reported-by: Yifan Wu <yifanwucs@gmail.com>
Reported-by: Juefei Pu <tomapufckgml@gmail.com>
Reported-by: Xin Liu <bird@lzu.edu.cn>
Reviewed-by: Yuan Tan <yuantan098@gmail.com>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
|
|
batadv_tp_recv_ack() and batadv_tp_stop() are only valid for tp_vars in the
BATADV_TP_SENDER role. When called with a BATADV_TP_RECEIVER role, it
proceeds to read sender-only members that were never initialized, leading
to undefined behavior.
This can be triggered when a node that is currently acting as a receiver in
an ongoing tp_meter session receives a malicious ACK packet.
Guard against this by checking tp_vars->role immediately after the
lookup and bailing out if it is not BATADV_TP_SENDER, before any of
those members are accessed.
Cc: stable@kernel.org
Fixes: 33a3bb4a3345 ("batman-adv: throughput meter implementation")
Reported-by: Yuan Tan <yuantan098@gmail.com>
Reported-by: Yifan Wu <yifanwucs@gmail.com>
Reported-by: Juefei Pu <tomapufckgml@gmail.com>
Reported-by: Xin Liu <bird@lzu.edu.cn>
Reviewed-by: Yuan Tan <yuantan098@gmail.com>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
|
|
batadv_dat_forward_data() calls pskb_copy_for_clone() to duplicate an skb
for each DHT candidate, but does not check the return value before passing
it to batadv_send_skb_prepare_unicast_4addr(). That function dereferences
the skb unconditionally, so a failed allocation triggers a NULL pointer
dereference.
Skip forwarding to the current DHT candidate on allocation failure.
Cc: stable@kernel.org
Fixes: 785ea1144182 ("batman-adv: Distributed ARP Table - create DHT helper functions")
Reported-by: Yuan Tan <yuantan098@gmail.com>
Reported-by: Yifan Wu <yifanwucs@gmail.com>
Reported-by: Juefei Pu <tomapufckgml@gmail.com>
Reported-by: Xin Liu <bird@lzu.edu.cn>
Reviewed-by: Yuan Tan <yuantan098@gmail.com>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
|
|
batadv_gw_node_free() removes the gateway list entries during mesh teardown,
but it does not clear the currently selected gateway. This leaves stale
gateway state behind across cleanup and can break a later mesh recreation.
Clear bat_priv->gw.curr_gw before walking the gateway list so the selected
gateway reference is dropped as part of teardown.
Fixes: 2265c1410864 ("batman-adv: gateway election code refactoring")
Cc: stable@kernel.org
Reported-by: Yuan Tan <yuantan098@gmail.com>
Reported-by: Yifan Wu <yifanwucs@gmail.com>
Reported-by: Juefei Pu <tomapufckgml@gmail.com>
Reported-by: Xin Liu <bird@lzu.edu.cn>
Signed-off-by: Ruijie Li <ruijieli51@gmail.com>
Signed-off-by: Zhanpeng Li <lzhanpeng2025@lzu.edu.cn>
Signed-off-by: Ren Wei <n05ec@lzu.edu.cn>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
|
|
batman-adv keeps a running payload length for queued fragments and uses it
to validate a fragment chain before reassembly.
That accounting currently allows the accumulated fragment length to be
truncated during updates. As a result, malformed fragment chains can
bypass the intended validation and drive reassembly with inconsistent
length state, leading to a local denial of service.
Fix the accounting by storing the accumulated length in a length-typed
field and rejecting update overflows before the existing validation logic
runs.
The fix was verified against the original reproducer and against valid
fragment reassembly paths.
Fixes: 610bfc6bc99b ("batman-adv: Receive fragmented packets and merge")
Cc: stable@kernel.org
Reported-by: Yuan Tan <yuantan098@gmail.com>
Reported-by: Yifan Wu <yifanwucs@gmail.com>
Reported-by: Juefei Pu <tomapufckgml@gmail.com>
Reported-by: Xin Liu <bird@lzu.edu.cn>
Signed-off-by: Ruide Cao <caoruide123@gmail.com>
Tested-by: Ren Wei <enjou1224z@gmail.com>
Signed-off-by: Ren Wei <n05ec@lzu.edu.cn>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
|
|
The helpers to prepare the buffers for the local and global TT based
replies are trying to sum up all TT entries which can be found for each
VLAN. In theory, this sum can be too big for an u16 and therefore overflow.
A too small buffer would then be allocated for the TVLV.
The too small buffer will be handled gracefully by
batadv_tt_tvlv_generate() and is not causing a buffer overflow - just a
truncated reply. But this overflow shouldn't have happened in the first and
the too small buffer should never have been allocated when an overflow was
detected.
Cc: stable@kernel.org
Fixes: 7ea7b4a14275 ("batman-adv: make the TT CRC logic VLAN specific")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
|
|
The commit 16116dac2339 ("batman-adv: prevent TT request storms by not
sending inconsistent TT TLVLs") added checks to the local (direct) TT
response code. But the response can also be done indirectly by another node
using the global TT state. To avoid such inconsistency states reported in
the original fix, also avoid sending empty VLANs for replies from the
global TT state.
Cc: stable@kernel.org
Fixes: 7ea7b4a14275 ("batman-adv: make the TT CRC logic VLAN specific")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
|
|
The local TT based TVLV is generated by first checking the number of VLANs
which have at least one TT entry. A new buffer with the correct size for
the VLANs is then allocated. Only then, the list of VLANs s used to fill
the VLAN entries in the buffer. During this time, the meshif_vlan_list_lock
is held. But the actual number of TT entries of each VLAN can still
increase during this time - just not the number of VLANs in the list.
But the prefilter used in the buffer size calculation might still cause an
increase of the number of VLANs which need to be stored. Simply because a
VLAN might now suddenly have at least one entry when it had none in the
pre-alloc check - and then needs to occupy space which was not allocated.
It is better to overestimate the buffer size at the beginning and then fill
the buffer only with the VLANs which are not empty.
Cc: stable@kernel.org
Fixes: 16116dac2339 ("batman-adv: prevent TT request storms by not sending inconsistent TT TLVLs")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
|
|
batadv_piv_tt::last_changeset_len len was declared as s16, but the field is
never intended to hold a negative value. When a value greater than 32767 is
assigned, it wraps to a negative signed integer.
In batadv_send_my_tt_response(), last_changeset_len is temporarily widened
to s32. The incorrectly negative s16 value propagates into the s32, causing
batadv_tt_prepare_tvlv_local_data() to allocate a full sized buffer but
populates only a small portion of it with the collected changeset. All
remaining bits are kept uninitialized.
Using an u16 avoids this type confusion and ensures that no (negative) sign
extension is performed in batadv_send_my_tt_response().
Cc: stable@kernel.org
Fixes: a73105b8d4c7 ("batman-adv: improved client announcement mechanism")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
|
|
batadv_orig_node::tt_buff_len was declared as s16, but the field is never
intended to hold a negative value. When a value greater than 32767 is
assigned, it wraps to a negative signed integer.
In batadv_send_other_tt_response(), tt_buff_len is temporarily widened to
s32. The incorrectly negative s16 value propagates into the s32, causing
batadv_tt_prepare_tvlv_global_data() to allocate a full sized buffer but
populates only a small portion of it with the collected changeset. All
remaining bits are kept uninitialized.
Using an u16 avoids this type confusion and ensures that no (negative) sign
extension is performed in batadv_send_other_tt_response().
Cc: stable@kernel.org
Fixes: a73105b8d4c7 ("batman-adv: improved client announcement mechanism")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
|
|
The commit 3a359bf5c61d ("batman-adv: reject oversized global TT response
buffers") added a check to ensure that a global return buffer size can be
stored in an u16. The same buffer handling also exists for the local data
buffer but was not touched.
A similar check should be also be in place for the local TVLV buffer. It
doesn't have the similar attack surface because it is only generated from
locally discovered MAC addresses but the dynamic nature could still cause
temporarily to large buffers.
Cc: stable@kernel.org
Fixes: 7ea7b4a14275 ("batman-adv: make the TT CRC logic VLAN specific")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
|
|
The receiver shutdown timer handler, batadv_tp_receiver_shutdown(), is
responsible for releasing the tp_vars reference it holds. However, the
existing logic for coordinating this release with batadv_tp_stop_all() was
flawed.
timer_shutdown_sync() guarantees the timer will not fire again after it
returns, but it returns non-zero only when the timer was pending at the
time of the call. If the timer had already expired (and
batadv_tp_stop_all() would unsucessfully try to rearm itself),
batadv_tp_stop_all() skips its batadv_tp_vars_put(), and
batadv_tp_receiver_shutdown() fails to put its own reference as well.
Fix this by introducing a new atomic variable receiving that is set to 1
when the receiver is initialized and cleared atomically with atomic_xchg()
by whichever side claims it first. Only the side that observes the
transition from 1 to 0 is responsible for releasing the tp_vars timer
reference, eliminating the uncertainty.
Cc: stable@kernel.org
Fixes: 3d3cf6a7314a ("batman-adv: stop tp_meter sessions during mesh teardown")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
|
|
batadv_tp_sender_shutdown() unconditionally decrements the "sending"
atomic counter. If multiple paths (e.g. timeout, user cancel, and
normal finish) call this function, the counter can underflow to -1.
Since the sender logic treats any non-zero value as "still sending",
a negative value causes the sender kthread to loop indefinitely.
This leads to a use-after-free when the interface is removed while
the zombie thread is still active.
Fix this by using atomic_xchg() to ensure the counter only transitions
from 1 to 0 once.
Fixes: 33a3bb4a3345 ("batman-adv: throughput meter implementation")
Cc: stable@kernel.org
Reported-by: Yuan Tan <yuantan098@gmail.com>
Reported-by: Yifan Wu <yifanwucs@gmail.com>
Reported-by: Juefei Pu <tomapufckgml@gmail.com>
Reported-by: Xin Liu <bird@lzu.edu.cn>
Signed-off-by: Luxiao Xu <rakukuip@gmail.com>
Signed-off-by: Ren Wei <n05ec@lzu.edu.cn>
[sven: added missing change in batadv_tp_send]
Signed-off-by: Sven Eckelmann <sven@narfation.org>
|
|
When batadv_bla_add_claim() fails to insert a new claim into the hash, it
leaked a reference to the backbone_gw for which the claim was intended.
Call batadv_backbone_gw_put() on the error path to release the reference
and avoid leaking the backbone_gw object.
Cc: stable@kernel.org
Fixes: 3db0decf1185 ("batman-adv: Fix non-atomic bla_claim::backbone_gw access")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
|
|
When batadv_bla_purge_claims() goes through the list of claims, it is only
traversing the hash list with an rcu_read_lock(). Due to a potential
parallel batadv_claim_put(), it can happen that it encounters a claim which
was actually in the process of being released+freed by
batadv_claim_release(). In this case, backbone_gw is set to NULL before the
delayed RCU kfree is started. Calling batadv_bla_claim_get_backbone_gw() is
then no longer allowed because it would cause a NULL-ptr derefence.
To avoid this, only claims with a valid reference counter must be purged.
All others are already taken care of.
Cc: stable@kernel.org
Fixes: 23721387c409 ("batman-adv: add basic bridge loop avoidance code")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
|
|
When batadv_bla_del_backbone_claims() removes all claims for a backbone, it
does this by dropping the link entry in the hash list. This list entry
itself was one of the references which need to be dropped at the same time
via batadv_claim_put().
But the batadv_claim_put() must not be done before the last access to the
claim object in this function. Otherwise the claim might be freed already
by the batadv_claim_release() function before the list entry was dropped.
Cc: stable@kernel.org
Fixes: 23721387c409 ("batman-adv: add basic bridge loop avoidance code")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
|
|
When batadv_tp_start() or batadv_tp_init_recv() fail to allocate a new
tp_vars object, the previously incremented bat_priv->tp_num counter is
never decremented. This causes tp_num to drift upward on each allocation
failure. Since only BATADV_TP_MAX_NUM sessions can be started and the count
is never reduced for these failed allocations, it causes to an exhaustion
of throughput meter sessions. In worst case, no new throughput meter
session can be started until the mesh interface is removed.
The error handling must decrement tp_num releasing the lock and aborting
the creation of an throughput meter session
Cc: stable@kernel.org
Fixes: 33a3bb4a3345 ("batman-adv: throughput meter implementation")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
|
|
BAT IV keeps the last-hop neighbor address in each neigh_node, but some
paths also cache an originator pointer derived from a temporary lookup.
That pointer is not owned by the neigh_node and may no longer refer to a
live originator entry after purge handling runs.
Stop storing the auxiliary originator pointer in the BAT IV neighbor
state. When BAT IV needs the neighbor originator data, resolve it from
the stored neighbor address and drop the reference again after use.
Fixes: c6c8fea29769 ("net: Add batman-adv meshing protocol")
Cc: stable@kernel.org
Reported-by: Yuan Tan <yuantan098@gmail.com>
Reported-by: Yifan Wu <yifanwucs@gmail.com>
Reported-by: Juefei Pu <tomapufckgml@gmail.com>
Reported-by: Xin Liu <bird@lzu.edu.cn>
Signed-off-by: Jiexun Wang <wangjiexun2025@gmail.com>
Signed-off-by: Ren Wei <n05ec@lzu.edu.cn>
[sven: avoid bonding logic for outgoing OGM]
Signed-off-by: Sven Eckelmann <sven@narfation.org>
|
|
TP meter sessions remain linked on bat_priv->tp_list after the netlink
request has already finished. When the mesh interface is removed,
batadv_mesh_free() currently tears down the mesh without first draining
these sessions.
A running sender thread or a late incoming tp_meter packet can then keep
processing against a mesh instance which is already shutting down.
Synchronize tp_meter with the mesh lifetime by stopping all active
sessions from batadv_mesh_free() and waiting for sender threads to exit
before teardown continues.
Fixes: 33a3bb4a3345 ("batman-adv: throughput meter implementation")
Cc: stable@kernel.org
Reported-by: Yuan Tan <yuantan098@gmail.com>
Reported-by: Yifan Wu <yifanwucs@gmail.com>
Reported-by: Juefei Pu <tomapufckgml@gmail.com>
Reported-by: Xin Liu <bird@lzu.edu.cn>
Co-developed-by: Luxing Yin <tr0jan@lzu.edu.cn>
Signed-off-by: Luxing Yin <tr0jan@lzu.edu.cn>
Signed-off-by: Jiexun Wang <wangjiexun2025@gmail.com>
Signed-off-by: Ren Wei <n05ec@lzu.edu.cn>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
|
|
Prevent tp_meter from starting new sender or receiver sessions after
mesh_state has left BATADV_MESH_ACTIVE.
Fixes: 33a3bb4a3345 ("batman-adv: throughput meter implementation")
Cc: stable@kernel.org
Reported-by: Yuan Tan <yuantan098@gmail.com>
Reported-by: Yifan Wu <yifanwucs@gmail.com>
Reported-by: Juefei Pu <tomapufckgml@gmail.com>
Reported-by: Xin Liu <bird@lzu.edu.cn>
Co-developed-by: Luxing Yin <tr0jan@lzu.edu.cn>
Signed-off-by: Luxing Yin <tr0jan@lzu.edu.cn>
Signed-off-by: Jiexun Wang <wangjiexun2025@gmail.com>
Signed-off-by: Ren Wei <n05ec@lzu.edu.cn>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
|
|
Fixing an integer overflow present in batadv_iv_ogm_send_to_if. The size
check is done using the int type in batadv_iv_ogm_aggr_packet whereas the
buff_pos variable uses the s16 type. This could lead to an out-of-bound
read.
Cc: stable@vger.kernel.org
Fixes: c6c8fea29769 ("net: Add batman-adv meshing protocol")
Signed-off-by: Lyes Bourennani <lbourennani@fuzzinglabs.com>
Signed-off-by: Alexis Pinson <apinson@fuzzinglabs.com>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
|
|
Commit c43267e6794a ("Merge tag 'arm64-upstream' of git://...") had a
conflict in the irq entry/exit code due to commit c5538d0141b3 ("entry:
Split kernel mode logic from irqentry_{enter,exit}()") having moved the
core code in irqentry_enter/exit() from kernel/entry/common.c into
helper inline functions in include/linux/irq-entry-common.h.
On the other side of the merge, the timer-core code had introduced
deferred hrtimer rearming infrastructure in commit 0e98eb14814e ("entry:
Prepare for deferred hrtimer rearming"), adding two calls to
hrtimer_rearm_deferred() in irqentry_enter().
When merging the two, moving the two calls to the new location wasn't a
problem, but afterwards I had made the mistake of looking what had
happened in linux-next. And linux-next had a very different merge
resolution in commit 04f02dc3ea74 ("Merge tag 'entry-for-arm64-26-04-08'
into sched/hrtick"), which had unified the two calls into one single
call-site in irqentry_exit_to_kernel_mode_preempt().
And that merge resolution looked cleverer than the straightforward one I
had done, so I re-did my merge the way it had been done in linux-next.
But it turns out nobody apparently tests linux-next, and the merge in
linux-next was just wrong.
The difference is that hrtimer_rearm_deferred() doesn't get called at
all for the case when state.exit_rcu is true, and the boot will
typically fail due to timers not triggering correctly.
So this undoes the "clever" merge, and does the straightforward one
instead.
Fixes: c43267e6794a ("Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux"
Reported-and-tested-by: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Link: https://lore.kernel.org/all/CAADnVQJ=MoiX4=guPWhL9vtnAELkpNx=GNm8RA1-aV424UFz2A@mail.gmail.com/
Link: https://lore.kernel.org/all/CAHk-=wg8+BER4VyFKG3rnPi2gXxbf-jbHS=EU+xhFqGVQfbutw@mail.gmail.com/
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull pid_namespace updates from Christian Brauner:
- pid_namespace: make init creation more flexible
Annotate ->child_reaper accesses with {READ,WRITE}_ONCE() to protect
the unlocked readers from cpu/compiler reordering, and enforce that
pid 1 in a pid namespace is always the first allocated pid (the
set_tid path already required this).
On top of that, allow opening pid_for_children before the pid
namespace init has been created. This lets one process create the pid
namespace and a different process create the init via setns(), which
makes clone3(set_tid) usable in all cases evenly and is particularly
useful to CRIU when restoring nested containers.
A new selftest covers both the basic create-pidns-then-init flow and
the cross-process variant, and a MAINTAINERS entry for the pid
namespace code is added.
- unrelated signal cleanup: update outdated comment for the removed
freezable_schedule()
* tag 'kernel-7.1-rc1.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
signal: update outdated comment for removed freezable_schedule()
MAINTAINERS: add a pid namespace entry
selftests: Add tests for creating pidns init via setns
pid_namespace: allow opening pid_for_children before init was created
pid: check init is created first after idr alloc
pid_namespace: avoid optimization of accesses to ->child_reaper
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs mount updates from Christian Brauner:
- Add FSMOUNT_NAMESPACE flag to fsmount() that creates a new mount
namespace with the newly created filesystem attached to a copy of the
real rootfs. This returns a namespace file descriptor instead of an
O_PATH mount fd, similar to how OPEN_TREE_NAMESPACE works for
open_tree().
This allows creating a new filesystem and immediately placing it in a
new mount namespace in a single operation, which is useful for
container runtimes and other namespace-based isolation mechanisms.
This accompanies OPEN_TREE_NAMESPACE and avoids a needless detour via
OPEN_TREE_NAMESPACE to get the same effect. Will be especially useful
when you mount an actual filesystem to be used as the container
rootfs.
- Currently, creating a new mount namespace always copies the entire
mount tree from the caller's namespace. For containers and sandboxes
that intend to build their mount table from scratch this is wasteful:
they inherit a potentially large mount tree only to immediately tear
it down.
This series adds support for creating a mount namespace that contains
only a clone of the root mount, with none of the child mounts. Two
new flags are introduced:
- CLONE_EMPTY_MNTNS (0x400000000) for clone3(), using the 64-bit flag space
- UNSHARE_EMPTY_MNTNS (0x00100000) for unshare()
Both flags imply CLONE_NEWNS. The resulting namespace contains a
single nullfs root mount with an immutable empty directory. The
intended workflow is to then mount a real filesystem (e.g., tmpfs)
over the root and build the mount table from there.
- Allow MOVE_MOUNT_BENEATH to target the caller's rootfs, allowing to
switch out the rootfs without pivot_root(2).
The traditional approach to switching the rootfs involves
pivot_root(2) or a chroot_fs_refs()-based mechanism that atomically
updates fs->root for all tasks sharing the same fs_struct. This has
consequences for fork(), unshare(CLONE_FS), and setns().
This series instead decomposes root-switching into individually
atomic, locally-scoped steps:
fd_tree = open_tree(-EBADF, "/newroot", OPEN_TREE_CLONE | OPEN_TREE_CLOEXEC);
fchdir(fd_tree);
move_mount(fd_tree, "", AT_FDCWD, "/", MOVE_MOUNT_BENEATH | MOVE_MOUNT_F_EMPTY_PATH);
chroot(".");
umount2(".", MNT_DETACH);
Since each step only modifies the caller's own state, the
fork/unshare/setns races are eliminated by design.
A key step to making this possible is to remove the locked mount
restriction. Originally MOVE_MOUNT_BENEATH doesn't support mounting
beneath a mount that is locked. The locked mount protects the
underlying mount from being revealed. This is a core mechanism of
unshare(CLONE_NEWUSER | CLONE_NEWNS). The mounts in the new mount
namespace become locked. That effectively makes the new mount table
useless as the caller cannot ever get rid of any of the mounts no
matter how useless they are.
We can lift this restriction though. We simply transfer the locked
property from the top mount to the mount beneath. This works because
what we care about is to protect the underlying mount aka the parent.
The mount mounted between the parent and the top mount takes over the
job of protecting the parent mount from the top mount mount. This
leaves us free to remove the locked property from the top mount which
can consequently be unmounted:
unshare(CLONE_NEWUSER | CLONE_NEWNS)
and we inherit a clone of procfs on /proc then currently we cannot
unmount it as:
umount -l /proc
will fail with EINVAL because the procfs mount is locked.
After this series we can now do:
mount --beneath -t tmpfs tmpfs /proc
umount -l /proc
after which a tmpfs mount has been placed beneath the procfs mount.
The tmpfs mount has become locked and the procfs mount has become
unlocked.
This means you can safely modify an inherited mount table after
unprivileged namespace creation.
Afterwards we simply make it possible to move a mount beneath the
rootfs allowing to upgrade the rootfs.
Removing the locked restriction makes this very useful for containers
created with unshare(CLONE_NEWUSER | CLONE_NEWNS) to reshuffle an
inherited mount table safely and MOVE_MOUNT_BENEATH makes it possible
to switch out the rootfs instead of using the costly pivot_root(2).
* tag 'vfs-7.1-rc1.mount.v2' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
selftests/namespaces: remove unused utils.h include from listns_efault_test
selftests/fsmount_ns: add missing TARGETS and fix cap test
selftests/empty_mntns: fix wrong CLONE_EMPTY_MNTNS hex value in comment
selftests/empty_mntns: fix statmount_alloc() signature mismatch
selftests/statmount: remove duplicate wait_for_pid()
mount: always duplicate mount
selftests/filesystems: add MOVE_MOUNT_BENEATH rootfs tests
move_mount: allow MOVE_MOUNT_BENEATH on the rootfs
move_mount: transfer MNT_LOCKED
selftests/filesystems: add clone3 tests for empty mount namespaces
selftests/filesystems: add tests for empty mount namespaces
namespace: allow creating empty mount namespaces
selftests: add FSMOUNT_NAMESPACE tests
selftests/statmount: add statmount_alloc() helper
tools: update mount.h header
mount: add FSMOUNT_NAMESPACE
mount: simplify __do_loopback()
mount: start iterating from start of rbtree
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Support HW queue leasing, allowing containers to be granted access
to HW queues for zero-copy operations and AF_XDP
- Number of code moves to help the compiler with inlining. Avoid
output arguments for returning drop reason where possible
- Rework drop handling within qdiscs to include more metadata about
the reason and dropping qdisc in the tracepoints
- Remove the rtnl_lock use from IP Multicast Routing
- Pack size information into the Rx Flow Steering table pointer
itself. This allows making the table itself a flat array of u32s,
thus making the table allocation size a power of two
- Report TCP delayed ack timer information via socket diag
- Add ip_local_port_step_width sysctl to allow distributing the
randomly selected ports more evenly throughout the allowed space
- Add support for per-route tunsrc in IPv6 segment routing
- Start work of switching sockopt handling to iov_iter
- Improve dynamic recvbuf sizing in MPTCP, limit burstiness and avoid
buffer size drifting up
- Support MSG_EOR in MPTCP
- Add stp_mode attribute to the bridge driver for STP mode selection.
This addresses concerns about call_usermodehelper() usage
- Remove UDP-Lite support (as announced in 2023)
- Remove support for building IPv6 as a module. Remove the now
unnecessary function calling indirection
Cross-tree stuff:
- Move Michael MIC code from generic crypto into wireless, it's
considered insecure but some WiFi networks still need it
Netfilter:
- Switch nft_fib_ipv6 module to no longer need temporary dst_entry
object allocations by using fib6_lookup() + RCU.
Florian W reports this gets us ~13% higher packet rate
- Convert IPVS's global __ip_vs_mutex to per-net service_mutex and
switch the service tables to be per-net. Convert some code that
walks the service lists to use RCU instead of the service_mutex
- Add more opinionated input validation to lower security exposure
- Make IPVS hash tables to be per-netns and resizable
Wireless:
- Finished assoc frame encryption/EPPKE/802.1X-over-auth
- Radar detection improvements
- Add 6 GHz incumbent signal detection APIs
- Multi-link support for FILS, probe response templates and client
probing
- New APIs and mac80211 support for NAN (Neighbor Aware Networking,
aka Wi-Fi Aware) so less work must be in firmware
Driver API:
- Add numerical ID for devlink instances (to avoid having to create
fake bus/device pairs just to have an ID). Support shared devlink
instances which span multiple PFs
- Add standard counters for reporting pause storm events (implement
in mlx5 and fbnic)
- Add configuration API for completion writeback buffering (implement
in mana)
- Support driver-initiated change of RSS context sizes
- Support DPLL monitoring input frequency (implement in zl3073x)
- Support per-port resources in devlink (implement in mlx5)
Misc:
- Expand the YAML spec for Netfilter
Drivers
- Software:
- macvlan: support multicast rx for bridge ports with shared
source MAC address
- team: decouple receive and transmit enablement for IEEE 802.3ad
LACP "independent control"
- Ethernet high-speed NICs:
- nVidia/Mellanox:
- support high order pages in zero-copy mode (for payload
coalescing)
- support multiple packets in a page (for systems with 64kB
pages)
- Broadcom 25-400GE (bnxt):
- implement XDP RSS hash metadata extraction
- add software fallback for UDP GSO, lowering the IOMMU cost
- Broadcom 800GE (bnge):
- add link status and configuration handling
- add various HW and SW statistics
- Marvell/Cavium:
- NPC HW block support for cn20k
- Huawei (hinic3):
- add mailbox / control queue
- add rx VLAN offload
- add driver info and link management
- Ethernet NICs:
- Marvell/Aquantia:
- support reading SFP module info on some AQC100 cards
- Realtek PCI (r8169):
- add support for RTL8125cp
- Realtek USB (r8152):
- support for the RTL8157 5Gbit chip
- add 2500baseT EEE status/configuration support
- Ethernet NICs embedded and off-the-shelf IP:
- Synopsys (stmmac):
- cleanup and reorganize SerDes handling and PCS support
- cleanup descriptor handling and per-platform data
- cleanup and consolidate MDIO defines and handling
- shrink driver memory use for internal structures
- improve Tx IRQ coalescing
- improve TCP segmentation handling
- add support for Spacemit K3
- Cadence (macb):
- support PHYs that have inband autoneg disabled with GEM
- support IEEE 802.3az EEE
- rework usrio capabilities and handling
- AMD (xgbe):
- improve power management for S0i3
- improve TX resilience for link-down handling
- Virtual:
- Google cloud vNIC:
- support larger ring sizes in DQO-QPL mode
- improve HW-GRO handling
- support UDP GSO for DQO format
- PCIe NTB:
- support queue count configuration
- Ethernet PHYs:
- automatically disable PHY autonomous EEE if MAC is in charge
- Broadcom:
- add BCM84891/BCM84892 support
- Micrel:
- support for LAN9645X internal PHY
- Realtek:
- add RTL8224 pair order support
- support PHY LEDs on RTL8211F-VD
- support spread spectrum clocking (SSC)
- Maxlinear:
- add PHY-level statistics via ethtool
- Ethernet switches:
- Maxlinear (mxl862xx):
- support for bridge offloading
- support for VLANs
- support driver statistics
- Bluetooth:
- large number of fixes and new device IDs
- Mediatek:
- support MT6639 (MT7927)
- support MT7902 SDIO
- WiFi:
- Intel (iwlwifi):
- UNII-9 and continuing UHR work
- MediaTek (mt76):
- mt7996/mt7925 MLO fixes/improvements
- mt7996 NPU support (HW eth/wifi traffic offload)
- Qualcomm (ath12k):
- monitor mode support on IPQ5332
- basic hwmon temperature reporting
- support IPQ5424
- Realtek:
- add USB RX aggregation to improve performance
- add USB TX flow control by tracking in-flight URBs
- Cellular:
- IPA v5.2 support"
* tag 'net-next-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1561 commits)
net: pse-pd: fix kernel-doc function name for pse_control_find_by_id()
wireguard: device: use exit_rtnl callback instead of manual rtnl_lock in pre_exit
wireguard: allowedips: remove redundant space
tools: ynl: add sample for wireguard
wireguard: allowedips: Use kfree_rcu() instead of call_rcu()
MAINTAINERS: Add netkit selftest files
selftests/net: Add additional test coverage in nk_qlease
selftests/net: Split netdevsim tests from HW tests in nk_qlease
tools/ynl: Make YnlFamily closeable as a context manager
net: airoha: Add missing PPE configurations in airoha_ppe_hw_init()
net: airoha: Fix VIP configuration for AN7583 SoC
net: caif: clear client service pointer on teardown
net: strparser: fix skb_head leak in strp_abort_strp()
net: usb: cdc-phonet: fix skb frags[] overflow in rx_complete()
selftests/bpf: add test for xdp_master_redirect with bond not up
net, bpf: fix null-ptr-deref in xdp_master_redirect() for down master
net: airoha: Remove PCE_MC_EN_MASK bit in REG_FE_PCE_CFG configuration
sctp: disable BH before calling udp_tunnel_xmit_skb()
sctp: fix missing encap_port propagation for GSO fragments
net: airoha: Rely on net_device pointer in ETS callbacks
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Pull bpf updates from Alexei Starovoitov:
- Welcome new BPF maintainers: Kumar Kartikeya Dwivedi, Eduard
Zingerman while Martin KaFai Lau reduced his load to Reviwer.
- Lots of fixes everywhere from many first time contributors. Thank you
All.
- Diff stat is dominated by mechanical split of verifier.c into
multiple components:
- backtrack.c: backtracking logic and jump history
- states.c: state equivalence
- cfg.c: control flow graph, postorder, strongly connected
components
- liveness.c: register and stack liveness
- fixups.c: post-verification passes: instruction patching, dead
code removal, bpf_loop inlining, finalize fastcall
8k line were moved. verifier.c still stands at 20k lines.
Further refactoring is planned for the next release.
- Replace dynamic stack liveness with static stack liveness based on
data flow analysis.
This improved the verification time by 2x for some programs and
equally reduced memory consumption. New logic is in liveness.c and
supported by constant folding in const_fold.c (Eduard Zingerman,
Alexei Starovoitov)
- Introduce BTF layout to ease addition of new BTF kinds (Alan Maguire)
- Use kmalloc_nolock() universally in BPF local storage (Amery Hung)
- Fix several bugs in linked registers delta tracking (Daniel Borkmann)
- Improve verifier support of arena pointers (Emil Tsalapatis)
- Improve verifier tracking of register bounds in min/max and tnum
domains (Harishankar Vishwanathan, Paul Chaignon, Hao Sun)
- Further extend support for implicit arguments in the verifier (Ihor
Solodrai)
- Add support for nop,nop5 instruction combo for USDT probes in libbpf
(Jiri Olsa)
- Support merging multiple module BTFs (Josef Bacik)
- Extend applicability of bpf_kptr_xchg (Kaitao Cheng)
- Retire rcu_trace_implies_rcu_gp() (Kumar Kartikeya Dwivedi)
- Support variable offset context access for 'syscall' programs (Kumar
Kartikeya Dwivedi)
- Migrate bpf_task_work and dynptr to kmalloc_nolock() (Mykyta
Yatsenko)
- Fix UAF in in open-coded task_vma iterator (Puranjay Mohan)
* tag 'bpf-next-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (241 commits)
selftests/bpf: cover short IPv4/IPv6 inputs with adjust_room
bpf: reject short IPv4/IPv6 inputs in bpf_prog_test_run_skb
selftests/bpf: Use memfd_create instead of shm_open in cgroup_iter_memcg
selftests/bpf: Add test for cgroup storage OOB read
bpf: Fix OOB in pcpu_init_value
selftests/bpf: Fix reg_bounds to match new tnum-based refinement
selftests/bpf: Add tests for non-arena/arena operations
bpf: Allow instructions with arena source and non-arena dest registers
bpftool: add missing fsession to the usage and docs of bpftool
docs/bpf: add missing fsession attach type to docs
bpf: add missing fsession to the verifier log
bpf: Move BTF checking logic into check_btf.c
bpf: Move backtracking logic to backtrack.c
bpf: Move state equivalence logic to states.c
bpf: Move check_cfg() into cfg.c
bpf: Move compute_insn_live_regs() into liveness.c
bpf: Move fixup/post-processing logic from verifier.c into fixups.c
bpf: Simplify do_check_insn()
bpf: Move checks for reserved fields out of the main pass
bpf: Delete unused variable
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest updates from Shuah Khan:
- cpu-hotplug: fix to check if cpu hotplug is supported to avoid
test failures when cpu hotplug isn't supported.
- frace: fix to relevant comparisons and path checks in the helper so
it handles those patterns without spurious shell warnings.
- runner.sh: add ktrap support
- tracing: fix to make --logdir option work again
- tracing: fix to check awk supports non POSIX strtonum()
- mqueue: fix incorrectly named settings file to make sure the test
used the correct timeout value
- kselftest:
- fix to treat xpass as successful result
- add ksft_reset_state()
- kselftest_harness:
- validate kselftest exit codes are handled explicitly
- add detection of invalid mixing of kselftest and harness
functionality
- add validation of intermixing of kselftest and harness
functionality
- run_kselftest.sh:
- remove unused $ROOT
- resolve BASE_DIR with pwd -P to avoid dependency on realpath
or readlink commands to generate a physical absolute path for
BASE_DIR
- allow choosing per-test log directory
- preserve subtarget failures in all/install
* tag 'linux_kselftest-next-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests/ftrace: Quote check_requires comparisons
selftests: Preserve subtarget failures in all/install
selftests/run_kselftest.sh: Allow choosing per-test log directory
selftests/run_kselftest.sh: Resolve BASE_DIR with pwd -P
selftests/run_kselftest.sh: Remove unused $ROOT
selftests/cpu-hotplug: Fix check for cpu hotplug not supported
selftests/mqueue: Fix incorrectly named file
selftests: Use ktap helpers for runner.sh
selftests: harness: Validate intermixing of kselftest and harness functionality
selftests: harness: Detect illegal mixing of kselftest and harness functionality
selftests: kselftest: Add ksft_reset_state()
selftests: harness: Validate that explicit kselftest exitcodes are handled
selftests: kselftest: Treat xpass as successful result
selftests/tracing: Fix to check awk supports non POSIX strtonum()
selftests/tracing: Fix to make --logdir option work again
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kunit tool updates from Shuah Khan:
- terminate kernel under test on SIGINT when it catches SIGINT to make
sure the TTY isn't messed up and terminate the running kernel
- recommend --raw_output=all when KTAP header isn't found in the kernel
output, it's useful to re-run the test with --raw_output=all to find
out the reasons why the test didn't complete.
- skip stty when stdin is not a tty to avoid writing noise to stderr.
- show suites when user runs --list_suites option instead of entire
list of tests to make the output user friendly and concise.
* tag 'linux_kselftest-kunit-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kunit: tool: Terminate kernel under test on SIGINT
kunit: tool: skip stty when stdin is not a tty
kunit: tool: Recommend --raw_output=all if no KTAP found
kunit: Add --list_suites to show suites
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/modules/linux
Pull module updates from Sami Tolvanen:
"Kernel symbol flags:
- Replace the separate *_gpl symbol sections (__ksymtab_gpl and
__kcrctab_gpl) with a unified symbol table and a new __kflagstab
section.
This section stores symbol flags, such as the GPL-only flag, as an
8-bit bitset for each exported symbol. This is a cleanup that
simplifies symbol lookup in the module loader by avoiding table
fragmentation and will allow a cleaner way to add more flags later
if needed.
Module signature UAPI:
- Move struct module_signature to the UAPI headers to allow reuse by
tools outside the kernel proper, such as kmod and
scripts/sign-file.
This also renames a few constants for clarity and drops unused
signature types as preparation for hash-based module integrity
checking work that's in progress.
Sysfs:
- Add a /sys/module/<module>/import_ns sysfs attribute to show the
symbol namespaces imported by loaded modules.
This makes it easier to verify driver API access at runtime on
systems that care about such things (e.g. Android).
Cleanups and fixes:
- Force sh_addr to 0 for all sections in module.lds. This prevents
non-zero section addresses when linking modules with 'ld.bfd -r',
which confused elfutils.
- Fix a memory leak of charp module parameters on module unload when
the kernel is configured with CONFIG_SYSFS=n.
- Override the -EEXIST error code returned by module_init() to
userspace. This prevents confusion with the errno reserved by the
module loader to indicate that a module is already loaded.
- Simplify the warning message and drop the stack dump on positive
returns from module_init().
- Drop unnecessary extern keywords from function declarations and
synchronize parse_args() arguments with their implementation"
* tag 'modules-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/modules/linux: (23 commits)
module: Simplify warning on positive returns from module_init()
module: Override -EEXIST module return
documentation: remove references to *_gpl sections
module: remove *_gpl sections from vmlinux and modules
module: deprecate usage of *_gpl sections in module loader
module: use kflagstab instead of *_gpl sections
module: populate kflagstab in modpost
module: add kflagstab section to vmlinux and modules
module: define ksym_flags enumeration to represent kernel symbol flags
selftests/bpf: verify_pkcs7_sig: Use 'struct module_signature' from the UAPI headers
sign-file: use 'struct module_signature' from the UAPI headers
tools uapi headers: add linux/module_signature.h
module: Move 'struct module_signature' to UAPI
module: Give MODULE_SIG_STRING a more descriptive name
module: Give 'enum pkey_id_type' a more specific name
module: Drop unused signature types
extract-cert: drop unused definition of PKEY_ID_PKCS7
docs: symbol-namespaces: mention sysfs attribute
module: expose imported namespaces via sysfs
module: Remove extern keyword from param prototypes
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/nolibc/linux-nolibc
Pull nolibc updates from Thomas Weißschuh:
- Many new features and optimizations to printf()
- Rename non-standard symbols to avoid collisions with application code
- Support for byteswap.h, endian.h, err.h and asprintf()
- 64-bit dev_t
- Smaller cleanups and fixes to the code and build system
* tag 'nolibc-20260412-for-7.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/nolibc/linux-nolibc: (61 commits)
selftests/nolibc: use gcc 15
tools/nolibc: support UBSAN on gcc
tools/nolibc: create __nolibc_no_sanitize_ubsan
selftests/nolibc: don't skip tests for unimplemented syscalls anymore
selftests/nolibc: explicitly handle ENOSYS from ptrace()
tools/nolibc: add byteorder conversions
tools/nolibc: add the _syscall() macro
tools/nolibc: move the call to __sysret() into syscall()
tools/nolibc: rename the internal macros used in syscall()
selftests/nolibc: only use libgcc when really necessary
selftests/nolibc: test the memory allocator
tools/nolibc: check for overflow in calloc() without divisions
tools/nolibc: add support for asprintf()
tools/nolibc: use __builtin_offsetof()
tools/nolibc: use makedev() in fstatat()
tools/nolibc: handle all major and minor numbers in makedev() and friends
tools/nolibc: make dev_t 64 bits wide
tools/nolibc: move the logic of makedev() and friends into functions
selftests/nolibc: add a test for stat().st_rdev
selftests/nolibc: add some tests for makedev() and friends
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Madhavan Srinivasan:
- powerpc support for huge pfnmaps
- Cleanups to use masked user access
- Rework pnv_ioda_pick_m64_pe() to use better bitmap API
- Convert powerpc to AUDIT_ARCH_COMPAT_GENERIC
- Backup region offset update to eflcorehdr
- Fixes for wii/ps3 platform
- Implement JIT support for private stack in powerpc
- Implement JIT support for fsession in powerpc64 trampoline
- Add support for instruction array and indirect jump in powerpc
- Misc selftest fixes and cleanups
Thanks to Abhishek Dubey, Aditya Gupta, Alex Williamson, Amit Machhiwal,
Andrew Donnellan, Bartosz Golaszewski, Cédric Le Goater, Chen Ni,
Christophe Leroy (CS GROUP), Hari Bathini, J. Neuschäfer, Mukesh Kumar
Chaurasiya (IBM), Nam Cao, Nilay Shroff, Pavithra Prakash, Randy Dunlap,
Ritesh Harjani (IBM), Shrikanth Hegde, Sourabh Jain, Vaibhav Jain,
Venkat Rao Bagalkote, and Yury Norov (NVIDIA)
* tag 'powerpc-7.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (47 commits)
mailmap: Add entry for Andrew Donnellan
powerpc32/bpf: fix loading fsession func metadata using PPC_LI32
selftest/bpf: Enable gotox tests for powerpc64
powerpc64/bpf: Add support for indirect jump
selftest/bpf: Enable instruction array test for powerpc
powerpc/bpf: Add support for instruction array
powerpc32/bpf: Add fsession support
powerpc64/bpf: Implement fsession support
selftests/bpf: Enable private stack tests for powerpc64
powerpc64/bpf: Implement JIT support for private stack
powerpc: pci-ioda: Optimize pnv_ioda_pick_m64_pe()
powerpc: pci-ioda: use bitmap_alloc() in pnv_ioda_pick_m64_pe()
powerpc/net: Inline checksum wrappers and convert to scoped user access
powerpc/sstep: Convert to scoped user access
powerpc/align: Convert emulate_spe() to scoped user access
powerpc/ptrace: Convert gpr32_set_common_user() to scoped user access
powerpc/futex: Use masked user access
powerpc/audit: Convert powerpc to AUDIT_ARCH_COMPAT_GENERIC
cpuidle: powerpc: avoid double clear when breaking snooze
powerpc/ps3: spu.c: fix enum and Return kernel-doc warnings
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu
Pull m68knommu update from Greg Ungerer:
- fix task info flags handling for 68000 nommu
* tag 'm68knommu-for-v7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
m68k: Fix task info flags handling for 68000
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Catalin Marinas:
"The biggest changes are MPAM enablement in drivers/resctrl and new PMU
support under drivers/perf.
On the core side, FEAT_LSUI lets futex atomic operations with EL0
permissions, avoiding PAN toggling.
The rest is mostly TLB invalidation refactoring, further generic entry
work, sysreg updates and a few fixes.
Core features:
- Add support for FEAT_LSUI, allowing futex atomic operations without
toggling Privileged Access Never (PAN)
- Further refactor the arm64 exception handling code towards the
generic entry infrastructure
- Optimise __READ_ONCE() with CONFIG_LTO=y and allow alias analysis
through it
Memory management:
- Refactor the arm64 TLB invalidation API and implementation for
better control over barrier placement and level-hinted invalidation
- Enable batched TLB flushes during memory hot-unplug
- Fix rodata=full block mapping support for realm guests (when
BBML2_NOABORT is available)
Perf and PMU:
- Add support for a whole bunch of system PMUs featured in NVIDIA's
Tegra410 SoC (cspmu extensions for the fabric and PCIe, new drivers
for CPU/C2C memory latency PMUs)
- Clean up iomem resource handling in the Arm CMN driver
- Fix signedness handling of AA64DFR0.{PMUVer,PerfMon}
MPAM (Memory Partitioning And Monitoring):
- Add architecture context-switch and hiding of the feature from KVM
- Add interface to allow MPAM to be exposed to user-space using
resctrl
- Add errata workaround for some existing platforms
- Add documentation for using MPAM and what shape of platforms can
use resctrl
Miscellaneous:
- Check DAIF (and PMR, where relevant) at task-switch time
- Skip TFSR_EL1 checks and barriers in synchronous MTE tag check mode
(only relevant to asynchronous or asymmetric tag check modes)
- Remove a duplicate allocation in the kexec code
- Remove redundant save/restore of SCS SP on entry to/from EL0
- Generate the KERNEL_HWCAP_ definitions from the arm64 hwcap
descriptions
- Add kselftest coverage for cmpbr_sigill()
- Update sysreg definitions"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (109 commits)
arm64: rsi: use linear-map alias for realm config buffer
arm64: Kconfig: fix duplicate word in CMDLINE help text
arm64: mte: Skip TFSR_EL1 checks and barriers in synchronous tag check mode
arm64/sysreg: Update ID_AA64SMFR0_EL1 description to DDI0601 2025-12
arm64/sysreg: Update ID_AA64ZFR0_EL1 description to DDI0601 2025-12
arm64/sysreg: Update ID_AA64FPFR0_EL1 description to DDI0601 2025-12
arm64/sysreg: Update ID_AA64ISAR2_EL1 description to DDI0601 2025-12
arm64/sysreg: Update ID_AA64ISAR0_EL1 description to DDI0601 2025-12
arm64/hwcap: Generate the KERNEL_HWCAP_ definitions for the hwcaps
arm64: kexec: Remove duplicate allocation for trans_pgd
ACPI: AGDI: fix missing newline in error message
arm64: Check DAIF (and PMR) at task-switch time
arm64: entry: Use split preemption logic
arm64: entry: Use irqentry_{enter_from,exit_to}_kernel_mode()
arm64: entry: Consistently prefix arm64-specific wrappers
arm64: entry: Don't preempt with SError or Debug masked
entry: Split preemption from irqentry_exit_to_kernel_mode()
entry: Split kernel mode logic from irqentry_{enter,exit}()
entry: Move irqentry_enter() prototype later
entry: Remove local_irq_{enable,disable}_exit_to_user()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RAS updates from Borislav Petkov:
- Add new AMD MCA bank names and types to the MCA code, preceded by a
clean up of the relevant places to have them more developer-friendly
(read: sort them alphanumerically and clean up comments) such that
adding new banks is easy
* tag 'ras_core_for_v7.1_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mce, EDAC/mce_amd: Add new SMCA bank types
x86/mce, EDAC/mce_amd: Update CS bank type naming
x86/mce, EDAC/mce_amd: Reorder SMCA bank type enums
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras
Pull EDAC updates from Borislav Petkov:
- amd64_edac: Add support for AMD Zen 3 (family 19h, models 40h–4fh)
- i10nm: Add GNR error information decoder support as an alternative to
the firmware decoder
- versalnet: Restructure the init/teardown logic for correct and more
readable error handling. Also, fix two memory leaks and a resource
leak
- Convert several internal structs to use bounded flex arrays, enabling
the kernel's runtime checker to catch out-of-bounds memory accesses
- Mark various sysfs attribute tables read-only, preventing accidental
modification at runtime
- The usual fixes and cleanups across the subsystem
* tag 'edac_updates_for_v7.1_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC/mc: Use kzalloc_flex()
EDAC/ie31200: Make rpl_s_cfg static
EDAC/i10nm: Fix spelling mistake "readd" -> "read"
EDAC/versalnet: Fix device_node leak in mc_probe()
EDAC/versalnet: Fix memory leak in remove and probe error paths
EDAC/amd64: Add support for family 19h, models 40h-4fh
EDAC/i10nm: Add driver decoder for Granite Rapids server
EDAC/sb: Use kzalloc_flex()
EDAC/i7core: Use kzalloc_flex()
EDAC/mpc85xx: Constify device sysfs attributes
EDAC/device: Allow addition of const sysfs attributes
EDAC/pci_sysfs: Constify instance sysfs attributes
EDAC/device: Constify info sysfs attributes
EDAC/device: Drop unnecessary and dangerous casts of attributes
EDAC/device: Drop unused macro to_edacdev_attr()
EDAC/altera: Drop unused field eccmgr_sysfs_attr
EDAC/versalnet: Refactor memory controller initialization and cleanup
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 SEV updates from Borislav Petkov:
- Change the SEV host code handling of when SNP gets enabled in order
to allow the machine to claim SNP-related resources only when SNP
guests are really going to be launched. The user requests this by
loading the ccp module and thus it controls when SNP initialization
is done
So export an API which module code can call and do the necessary SNP
setup only when really needed
- Drop an unnecessary write-back and invalidate operation that was
being performed too early, since the ccp driver already issues its
own at the correct point in the initialization sequence
- Drop the hotplug callbacks for enabling SNP on newly onlined CPUs,
which were both architecturally unsound (the firmware rejects
initialization if any CPU lacks the required configuration) and buggy
(the MFDM SYSCFG MSR bit was not being set)
- Code refactoring and cleanups to accomplish the above
* tag 'x86_sev_for_v7.1_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
crypto/ccp: Update HV_FIXED page states to allow freeing of memory
crypto/ccp: Implement SNP x86 shutdown
x86/sev, crypto/ccp: Move HSAVE_PA setup to arch/x86/
x86/sev, crypto/ccp: Move SNP init to ccp driver
x86/sev: Create snp_shutdown()
x86/sev: Create snp_prepare()
x86/sev: Create a function to clear/zero the RMP
x86/sev: Rename SNP_FEATURES_PRESENT to SNP_FEATURES_IMPL
x86/virt/sev: Keep the RMP table bookkeeping area mapped
x86/virt/sev: Drop WBINVD before setting MSR_AMD64_SYSCFG_SNP_EN
x86/virt/sev: Drop support for SNP hotplug
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc x86 updates from Borislav Petkov:
- Reference the tip tree maintainer handbook directly from the relevant
MAINTAINERS file entries (covering timers, IRQ, locking, scheduling,
perf, x86, and others) so that contributors and tooling can know
where to look
- Enable interrupt remapping in defconfig, which is an architectural
requirement for x2APIC to function correctly on bare metal. Without
it, x2APIC was effectively enabled but non-functional.
- Ensure that drivers which register custom restart handlers (such as
those needed for SoC-based x86 devices like Intel Lightning Mountain)
are actually invoked during reboot, bringing x86 in line with how
other architectures handle this.
- Cleanups
* tag 'x86_misc_for_v7.1_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
MAINTAINERS: Add references to tip tree handbook
x86/64/defconfig: Add CONFIG_IRQ_REMAP
x86/reboot: Execute the kernel restart handler upon machine restart
x86/mtrr: Use kstrtoul() in parse_mtrr_spare_reg()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 microcode loading updates from Borislav Petkov:
"The kernel carries a table of Intel CPUs family, model, stepping, etc
tuples which say what is the latest microcode for that particular CPU.
Some CPU variants differ only by the platform ID which determines what
microcode needs to be loaded on them.
Carve out the platform ID handling from the microcode loader and make it
available in a more generic place so that the old microcode
verification machinery can use it"
* tag 'x86_microcode_for_v7.1_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/microcode: Add platform mask to Intel microcode "old" list
x86/cpu: Add platform ID to CPU matching structure
x86/cpu: Add platform ID to CPU info structure
x86/microcode: Refactor platform ID enumeration into a helper
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 FRED updates from Borislav Petkov:
"We made the FRED support an opt-in initially out of fear of it
breaking machines left and right in the case of a hw bug in the first
generation of machines supporting it.
Now that that the FRED code has seen a lot of hammering, flip the
logic to be opt-out as is the usual case with new hw features"
* tag 'x86_fred_for_v7.1_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/fred: Remove kernel log message when initializing exceptions
x86/fred: Enable FRED by default
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 resource control updates from Borislav Petkov:
- Add return value descriptions to several internal functions,
addressing kernel-doc complaints
- Add the x86 maintainer mailing list to the resctrl section so they
are automatically included in patch submissions, and reference the
applicable contribution rules document
- Allow users to apply a single Capacity Bitmask to all cache domains
at once using '*' as a shorthand, instead of having to specify each
domain individually. This is particularly user-friendly on high
core-count systems with many cache clusters
- When a user provides a non-existent domain ID while configuring cache
allocation, ensure the failure reason is properly reported to the
user rather than silently returning an error with a misleading "ok"
status
* tag 'x86_cache_for_v7.1_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
fs/resctrl: Add missing return value descriptions
MAINTAINERS: Update resctrl entry
fs/resctrl: Add "*" shorthand to set io_alloc CBM for all domains
fs/resctrl: Report invalid domain ID when parsing io_alloc_cbm
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 TDX updates from Dave Hansen:
"The only real thing of note here is printing the TDX module version.
This is a little silly on its own, but the upcoming TDX module update
code needs the same TDX module call. This shrinks that set a wee bit.
There's also few minor macro cleanups and a tweak to the GetQuote ABI
to make it easier for userspace to detect zero-length (failed) quotes"
* tag 'x86_tdx_for_7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
virt: tdx-guest: Return error for GetQuote failures
KVM/TDX: Rename KVM_SUPPORTED_TD_ATTRS to KVM_SUPPORTED_TDX_TD_ATTRS
x86/tdx: Rename TDX_ATTR_* to TDX_TD_ATTR_*
KVM/TDX: Remove redundant definitions of TDX_TD_ATTR_*
x86/tdx: Fix the typo in TDX_ATTR_MIGRTABLE
x86/virt/tdx: Print TDX module version during init
x86/virt/tdx: Retrieve TDX module version
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 mm updates from Dave Hansen:
- Convert x86 code to use generic "pagetable" APIs and ptdescs
This aligns some the set_memory*() code better with the new page
table APIs, especially using ptdescs as opposed to 'struct page'
directly.
* tag 'x86_mm_for_7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mm/pat: Convert split_large_page() to use ptdescs
x86/mm/pat: Convert populate_pgd() to use page table apis
x86/mm/pat: Convert pmd code to use page table apis
x86/mm/pat: Convert pte code to use page table apis
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cpu updates from Dave Hansen:
- Complete LASS enabling: deal with vsyscall and EFI
The existing Linear Address Space Separation (LASS) support punted
on support for common EFI and vsyscall configs. Complete the
implementation by supporting EFI and vsyscall=xonly.
- Clean up CPUID usage in newer Intel "avs" audio driver and update the
x86-cpuid-db file
* tag 'x86_cpu_for_7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
tools/x86/kcpuid: Update bitfields to x86-cpuid-db v3.0
ASoC: Intel: avs: Include CPUID header at file scope
ASoC: Intel: avs: Check maximum valid CPUID leaf
x86/cpu: Remove LASS restriction on vsyscall emulation
x86/vsyscall: Disable LASS if vsyscall mode is set to EMULATE
x86/vsyscall: Restore vsyscall=xonly mode under LASS
x86/traps: Consolidate user fixups in the #GP handler
x86/vsyscall: Reorganize the page fault emulation code
x86/cpu: Remove LASS restriction on EFI
x86/efi: Disable LASS while executing runtime services
x86/cpu: Defer LASS enabling until userspace comes up
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 vdso updates from Ingo Molnar:
"vdso cleanups by Thomas Weißschuh:
- Clean up remnants of VDSO32_NOTE_MASK
- Drop pointless #ifdeffery in vvar_vclock_fault()"
* tag 'x86-vdso-2026-04-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/vdso: Drop pointless #ifdeffery in vvar_vclock_fault()
x86/vdso: Clean up remnants of VDSO32_NOTE_MASK
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 platform updates from Ingo Molnar:
- Remove M486/M486SX/ELAN support, first minimal step (Ingo Molnar)
- Print AGESA string from DMI additional information entry (Yazen
Ghannam, Mario Limonciello)
- Improve and fix the DMI code (Mario Limonciello):
- Correct an indexing error in <linux/dmi.h>
- Adjust dmi_decode() to use enums <linux/dmi.h>
- Add pr_fmt() for dmi_scan.c to fix & standardize the log prefixes
* tag 'x86-platform-2026-04-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/CPU/AMD: Print AGESA string from DMI additional information entry
firmware: dmi: Add pr_fmt() for dmi_scan.c
firmware: dmi: Adjust dmi_decode() to use enums
firmware: dmi: Correct an indexing error in dmi.h
x86/cpu: Remove M486/M486SX/ELAN support
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cleanups from Ingo Molnar:
- Consolidate AMD and Hygon cases in parse_topology() (Wei Wang)
- asm constraints cleanups in __iowrite32_copy() (Uros Bizjak)
- Drop AMD Extended Interrupt LVT macros (Naveen N Rao)
- Don't use REALLY_SLOW_IO for delays (Juergen Gross)
- paravirt cleanups (Juergen Gross)
- FPU code cleanups (Borislav Petkov)
- split-lock handling code cleanups (Borislav Petkov, Ronan Pigott)
* tag 'x86-cleanups-2026-04-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/fpu: Correct the comment explaining what xfeatures_in_use() does
x86/split_lock: Don't warn about unknown split_lock_detect parameter
x86/fpu: Correct misspelled xfeaures_to_write local var
x86/apic: Drop AMD Extended Interrupt LVT macros
x86/cpu/topology: Consolidate AMD and Hygon cases in parse_topology()
block/floppy: Don't use REALLY_SLOW_IO for delays
x86/paravirt: Replace io_delay() hook with a bool
x86/irqflags: Preemptively move include paravirt.h directive where it belongs
x86/split_lock: Restructure the unwieldy switch-case in sld_state_show()
x86/local: Remove trailing semicolon from _ASM_XADD in local_add_return()
x86/asm: Use inout "+" asm onstraint modifiers in __iowrite32_copy()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 asm from Ingo Molnar:
"x86 asm cleanups by Uros Bizjak:
- Remove unnecessary memory clobbers from FS/GS base (read-)
accessors and savesegment()
- Use ASM_INPUT_RM in __loadsegment_fs() to work around clang code
generation problems
- Implement loadsegment()/savesegment() macros with static inline
helpers
- Use savesegment() for segment register reads in ELF core dump and
__show_regs()
- Use correct type for 'gs' variable in __show_regs() to avoid
zero-extension
- Clean up 'sel' variable usage in do_set_thread_area()"
* tag 'x86-asm-2026-04-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/tls: Clean up 'sel' variable usage in do_set_thread_area()
x86/process/32: Use correct type for 'gs' variable in __show_regs() to avoid zero-extension
x86/process/64: Use savesegment() in __show_regs() instead of inline asm
x86/elf: Use savesegment() for segment register reads in ELF core dump
x86/asm/segment: Implement loadsegment()/savesegment() macros with static inline helpers
x86/asm/segment: Use ASM_INPUT_RM in __loadsegment_fs()
x86/asm/segment: Remove unnecessary "memory" clobber from savesegment()
x86/asm/fsgsbase: Remove unnecessary "memory" clobbers from FS/GS base (read-) accessors
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
"Fair scheduling updates:
- Skip SCHED_IDLE rq for SCHED_IDLE tasks (Christian Loehle)
- Remove superfluous rcu_read_lock() in the wakeup path (K Prateek Nayak)
- Simplify the entry condition for update_idle_cpu_scan() (K Prateek Nayak)
- Simplify SIS_UTIL handling in select_idle_cpu() (K Prateek Nayak)
- Avoid overflow in enqueue_entity() (K Prateek Nayak)
- Update overutilized detection (Vincent Guittot)
- Prevent negative lag increase during delayed dequeue (Vincent Guittot)
- Clear buddies for preempt_short (Vincent Guittot)
- Implement more complex proportional newidle balance (Peter Zijlstra)
- Increase weight bits for avg_vruntime (Peter Zijlstra)
- Use full weight to __calc_delta() (Peter Zijlstra)
RT and DL scheduling updates:
- Fix incorrect schedstats for rt and dl thread (Dengjun Su)
- Skip group schedulable check with rt_group_sched=0 (Michal Koutný)
- Move group schedulability check to sched_rt_global_validate()
(Michal Koutný)
- Add reporting of runtime left & abs deadline to sched_getattr()
for DEADLINE tasks (Tommaso Cucinotta)
Scheduling topology updates by K Prateek Nayak:
- Compute sd_weight considering cpuset partitions
- Extract "imb_numa_nr" calculation into a separate helper
- Allocate per-CPU sched_domain_shared in s_data
- Switch to assigning "sd->shared" from s_data
- Remove sched_domain_shared allocation with sd_data
Energy-aware scheduling updates:
- Filter false overloaded_group case for EAS (Vincent Guittot)
- PM: EM: Switch to rcu_dereference_all() in wakeup path
(Dietmar Eggemann)
Infrastructure updates:
- Replace use of system_unbound_wq with system_dfl_wq (Marco Crivellari)
Proxy scheduling updates by John Stultz:
- Make class_schedulers avoid pushing current, and get rid of proxy_tag_curr()
- Minimise repeated sched_proxy_exec() checking
- Fix potentially missing balancing with Proxy Exec
- Fix and improve task::blocked_on et al handling
- Add assert_balance_callbacks_empty() helper
- Add logic to zap balancing callbacks if we pick again
- Move attach_one_task() and attach_task() helpers to sched.h
- Handle blocked-waiter migration (and return migration)
- Add K Prateek Nayak to scheduler reviewers for proxy execution
Misc cleanups and fixes by John Stultz, Joseph Salisbury, Peter
Zijlstra, K Prateek Nayak, Michal Koutný, Randy Dunlap, Shrikanth
Hegde, Vincent Guittot, Zhan Xusheng, Xie Yuanbin and Vincent Guittot"
* tag 'sched-core-2026-04-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (46 commits)
sched/eevdf: Clear buddies for preempt_short
sched/rt: Cleanup global RT bandwidth functions
sched/rt: Move group schedulability check to sched_rt_global_validate()
sched/rt: Skip group schedulable check with rt_group_sched=0
sched/fair: Avoid overflow in enqueue_entity()
sched: Use u64 for bandwidth ratio calculations
sched/fair: Prevent negative lag increase during delayed dequeue
sched/fair: Use sched_energy_enabled()
sched: Handle blocked-waiter migration (and return migration)
sched: Move attach_one_task and attach_task helpers to sched.h
sched: Add logic to zap balance callbacks if we pick again
sched: Add assert_balance_callbacks_empty helper
sched/locking: Add special p->blocked_on==PROXY_WAKING value for proxy return-migration
sched: Fix modifying donor->blocked on without proper locking
locking: Add task::blocked_lock to serialize blocked_on state
sched: Fix potentially missing balancing with Proxy Exec
sched: Minimise repeated sched_proxy_exec() checking
sched: Make class_schedulers avoid pushing current, and get rid of proxy_tag_curr()
MAINTAINERS: Add K Prateek Nayak to scheduler reviewers
sched/core: Get this cpu once in ttwu_queue_cond()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull performance events updates from Ingo Molnar:
"Core updates:
- Try to allocate task_ctx_data quickly, to optimize O(N^2) algorithm
on large systems with O(100k) threads (Namhyung Kim)
AMD PMU driver IBS support updates and fixes, by Ravi Bangoria:
- Fix interrupt accounting for discarded samples
- Fix a Zen5-specific quirk
- Fix PhyAddrVal handling
- Fix NMI-safety with perf_allow_kernel()
- Fix a race between event add and NMIs
Intel PMU driver updates:
- Only check GP counters for PEBS constraints validation (Dapeng Mi)
MSR driver:
- Turn SMI_COUNT and PPERF on by default, instead of a long list of
CPU models to enable them on (Kan Liang)
... and misc cleanups and fixes by Aldf Conte, Anshuman Khandual,
Namhyung Kim, Ravi Bangoria and Yen-Hsiang Hsu"
* tag 'perf-core-2026-04-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/events: Replace READ_ONCE() with standard pgtable accessors
perf/x86/msr: Make SMI and PPERF on by default
perf/x86/intel/p4: Fix unused variable warning in p4_pmu_init()
perf/x86/intel: Only check GP counters for PEBS constraints validation
perf/x86/amd/ibs: Fix comment typo in ibs_op_data
perf/amd/ibs: Advertise remote socket capability
perf/amd/ibs: Enable streaming store filter
perf/amd/ibs: Enable RIP bit63 hardware filtering
perf/amd/ibs: Enable fetch latency filtering
perf/amd/ibs: Support IBS_{FETCH|OP}_CTL2[Dis] to eliminate RMW race
perf/amd/ibs: Add new MSRs and CPUID bits definitions
perf/amd/ibs: Define macro for ldlat mask and shift
perf/amd/ibs: Avoid race between event add and NMI
perf/amd/ibs: Avoid calling perf_allow_kernel() from the IBS NMI handler
perf/amd/ibs: Preserve PhyAddrVal bit when clearing PhyAddr MSR
perf/amd/ibs: Limit ldlat->l3missonly dependency to Zen5
perf/amd/ibs: Account interrupt for discarded samples
perf/core: Simplify __detach_global_ctx_data()
perf/core: Try to allocate task_ctx_data quickly
perf/core: Pass GFP flags to attach_task_ctx_data()
|
