| Age | Commit message (Collapse) | Author |
|---|
|
Under heavy concurrent flush traffic, virtio-pmem can overflow its request
virtqueue (req_vq): virtqueue_add_sgs() starts returning -ENOSPC and the
driver logs "no free slots in the virtqueue". Shortly after that the
device enters VIRTIO_CONFIG_S_NEEDS_RESET and flush requests fail with
"virtio pmem device needs a reset".
Serialize virtio_pmem_flush() with a per-device mutex so only one flush
request is in-flight at a time. This prevents req_vq descriptor overflow
under high concurrency.
Reproducer (guest with virtio-pmem):
- mkfs.ext4 -F /dev/pmem0
- mount -t ext4 -o dax,noatime /dev/pmem0 /mnt/bench
- fio: ioengine=io_uring rw=randwrite bs=4k iodepth=64 numjobs=64
direct=1 fsync=1 runtime=30s time_based=1
- dmesg: "no free slots in the virtqueue"
"virtio pmem device needs a reset"
Fixes: 6e84200c0a29 ("virtio-pmem: Add virtio pmem driver")
Signed-off-by: Li Chen <me@linux.beauty>
Acked-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://patch.msgid.link/20260203021353.121091-1-me@linux.beauty
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
|
|
Explicitly set non-cached caching attributes for MMIO regions.
Default write-back mode can cause CPU to cache device memory,
causing invalid reads and unpredictable behavior.
Invalid read and write issues were observed on ARM64 when mapping the
notification area to userspace via mmap.
Signed-off-by: Kommula Shiva Shankar <kshankar@marvell.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20260102065703.656255-1-kshankar@marvell.com>
|
|
Improve MAC address handling in mlx5_vdpa_set_attr() to ensure that
old MAC entries are properly removed from the MPFS table before
adding a new one. The new MAC address is then added to both the MPFS
and VLAN tables.
This change fixes an issue where the updated MAC address would not
take effect until QEMU was rebooted.
Signed-off-by: Cindy Lu <lulu@redhat.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20260126094848.9601-4-lulu@redhat.com>
|
|
Factor out MAC address update logic and reuse it from handle_ctrl_mac().
This ensures that old MAC entries are removed from the MPFS table
before adding a new one and that the forwarding rules are updated
accordingly. If updating the flow table fails, the original MAC and
rules are restored as much as possible to keep the software and
hardware state consistent.
Signed-off-by: Cindy Lu <lulu@redhat.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20260126094848.9601-3-lulu@redhat.com>
|
|
Add logic in mlx5_vdpa_set_attr() to ensure the VIRTIO_NET_F_MAC
feature bit is properly set only when the device is not yet in
the DRIVER_OK (running) state.
This makes the MAC address visible in the output of:
vdpa dev config show -jp
when the device is created without an initial MAC address.
Signed-off-by: Cindy Lu <lulu@redhat.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20260126094848.9601-2-lulu@redhat.com>
|
|
Pull KVM fixes from Paolo Bonzini:
- Fix a bug where AVIC is incorrectly inhibited when running with
x2AVIC disabled via module param (or on a system without x2AVIC)
- Fix a dangling device posted IRQs bug by explicitly checking if the
irqfd is still active (on the list) when handling an eventfd signal,
instead of zeroing the irqfd's routing information when the irqfd is
deassigned.
Zeroing the irqfd's routing info causes arm64 and x86's to not
disable posting for the IRQ (kvm_arch_irq_bypass_del_producer() looks
for an MSI), incorrectly leaving the IRQ in posted mode (and leading
to use-after-free and memory leaks on AMD in particular).
This is both the most pressing and scariest, but it's been in -next
for a while.
- Disable FORTIFY_SOURCE for KVM selftests to prevent the compiler from
generating calls to the checked versions of memset() and friends,
which leads to unexpected page faults in guest code due e.g.
__memset_chk@plt not being resolved.
- Explicitly configure the supported XSS capabilities from within
{svm,vmx}_set_cpu_caps() to fix a bug where VMX will compute the
reference VMCS configuration with SHSTK and IBT enabled, but then
compute each CPUs local config with SHSTK and IBT disabled if not all
CET xfeatures are enabled, e.g. if the kernel is built with
X86_KERNEL_IBT=n.
The mismatch in features results in differing nVMX setting, and
ultimately causes kvm-intel.ko to refuse to load with nested=1.
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86: Explicitly configure supported XSS from {svm,vmx}_set_cpu_caps()
KVM: selftests: Add -U_FORTIFY_SOURCE to avoid some unpredictable test failures
KVM: x86: Assert that non-MSI doesn't have bypass vCPU when deleting producer
KVM: Don't clobber irqfd routing type when deassigning irqfd
KVM: SVM: Check vCPU ID against max x2AVIC ID if and only if x2AVIC is enabled
|
|
Merge updates of Intel thermal drivers for 6.20/7.0:
- Add Panther Lake, Wildcat Lake and Nova Lake processor IDs to the
list of supported processors in the intel_tcc_cooling thermal
driver (Srinivas Pandruvada)
- Drop unnecessary explicit driver data clearing on removal from the
intel_pch_thermal driver (Kaushlendra Kumar)
- Add support for "slow" workload type hints to the int340x
processor_thermal driver and enable it on the Panther Lake
platform (Srinivas Pandruvada)
- Use sysfs_emit{_at}() in sysfs show functions in Intel thermal
drivers (Thorsten Blum)
- Update the x86_pkg_temp_thermal driver to handle THERMAL_TEMP_INVALID
that can be passed to it via sysfs as expected (Rafael Wysocki)
- Drop a redundant local variable from the intel_tcc_cooling thermal
driver and fix a kerneldoc comment typo in the TCC library (Sumeet
Pawnikar)
* thermal-intel:
drivers: thermal: intel: tcc_cooling: Drop redundant local variable
thermal: intel: x86_pkg_temp_thermal: Handle invalid temperature
thermal: intel: Use sysfs_emit() in a sysfs show function
thermal: intel: fix typo "nagative" in comment for cpu argument
thermal: intel: int340x: Use sysfs_emit{_at}() in sysfs show functions
thermal: intel: selftests: workload_hint: Support slow workload hints
thermal: int340x: processor_thermal: Enable slow workload type hints
thermal: intel: intel_pch_thermal: Drop explicit driver data clearing
thermal: intel: intel_tcc_cooling: Add CPU models in the support list
|
|
McASP has dedicated clock & frame sync registers for both transmit
and receive. Currently McASP driver only supports synchronous behavior and
couples both TX & RX settings.
Add logic that enables asynchronous mode via ti,async-mode property. In
async mode, playback & record can be done simultaneously with different
audio configurations (tdm slots, tdm width, audio bit depth).
Note the ability to have different tx/rx DSP formats (i2s, dsp_a, etc.),
while possible in hardware, remains to be a gap as it require changes
to the corresponding machine driver interface.
Existing IIS (sync mode) and DIT mode logic remains mostly unchanged.
Exceptions are IIS mode logic that previously assumed sync mode, which has
now been made aware of the distinction. And shared logic across all modes
also now checks for McASP tx/rx-specific driver attributes. Those
attributes have been populated according to the original extent, ensuring
no divergence in functionality.
Constraints no longer applicable for async mode are skipped.
Clock selection options have also been added to include rx/tx-only clk_ids,
exposing independent configuration via the machine driver as well.
Note that asynchronous mode is not applicable for McASP in DIT mode,
which is a transmitter-only mode to interface w/ self-clocking formats.
Signed-off-by: Sen Wang <sen@ti.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Tested-by: Paresh Bhagat <p-bhagat@ti.com>
Link: https://patch.msgid.link/20260203003703.2334443-5-sen@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Simplify the mcasp_set_clk_pdir caller convention in start/stop stream
function, to make it so that set_clk_pdir gets called regardless when
stream starts and also disables when stream ends.
Functionality-wise, everything remains the same as the previously skipped
calls are now either correctly configured
(when McASP is SND_SOC_DAIFMT_BP_FC - pdir needs to be enabled)
or called with a bitmask of zero (when McASP is SND_SOC_DAIFMT_BC_FC - pdir
gets disabled).
On brief regarding McASP Clock and Frame sync configurations, refer to [0].
[0]:TRM Section 12.1.1.4.2 https://www.ti.com/lit/ug/sprujd4a/sprujd4a.pdf
Signed-off-by: Sen Wang <sen@ti.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Tested-by: Paresh Bhagat <p-bhagat@ti.com>
Link: https://patch.msgid.link/20260203003703.2334443-4-sen@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The current mcasp_is_synchronous() function does more than what it
proclaims, it also checks if McASP is a frame producer.
Therefore split the original function into two separate ones and
replace all occurrences with the new equivalent logic.
Signed-off-by: Sen Wang <sen@ti.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Tested-by: Paresh Bhagat <p-bhagat@ti.com>
Link: https://patch.msgid.link/20260203003703.2334443-3-sen@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
McASP supports the independent configuration of TX & RX clk and frame
sync registers. By default, the driver is configured in synchronous mode
where RX clock generator is disabled and it uses transmit clock signals as
bit clock and frame sync. Therefore add optional properties needed for
asynchronous mode.
Add ti,async-mode boolean binding to provide a way to decouple the default
behavior and allows for independent TX & RX clocking.
Add tdm-slots-rx uint32 binding to provide an alternative hardware
specifier stating the number of RX serializers.
The existing property tdm-slots will still dictate number of
TX serializers, and RX if tdm-slots-rx isn't given for backwards
compatibility.
Add auxclk-fs-ratio-rx which allows to specify the ratio just for RX.
The driver can be supplied with two different ratios
(auxclk-fs-ratio and auxclk-fs-ratio-rx in tandem) and achieve two
different sampling rates for tx & rx.
Signed-off-by: Sen Wang <sen@ti.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Tested-by: Paresh Bhagat <p-bhagat@ti.com>
Link: https://patch.msgid.link/20260203003703.2334443-2-sen@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Preserve original relative order of anonymous or same-named
types to improve the consistency.
No functional changes.
Signed-off-by: Donglin Peng <pengdonglin@xiaomi.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20260202120114.3707141-1-dolinux.peng@gmail.com
|
|
Add support for normalized CXL address translation through ACPI PRM method
to support AMD Zen5 platforms. Including a conventions doc that explains
how the translation is implemented and for future implementations that
need such setup to comply with the current implementation method.
cxl: Disable HPA/SPA translation handlers for Normalized Addressing
cxl/region: Factor out code into cxl_region_setup_poison()
cxl/atl: Lock decoders that need address translation
cxl: Enable AMD Zen5 address translation using ACPI PRMT
cxl/acpi: Prepare use of EFI runtime services
cxl: Introduce callback for HPA address ranges translation
cxl/region: Use region data to get the root decoder
cxl/region: Add @hpa_range argument to function cxl_calc_interleave_pos()
cxl/region: Separate region parameter setup and region construction
cxl: Simplify cxl_root_ops allocation and handling
cxl/region: Store HPA range in struct cxl_region
cxl/region: Store root decoder in struct cxl_region
cxl/region: Rename misleading variable name @hpa to @hpa_range
Documentation/driver-api/cxl: ACPI PRM Address Translation Support and AMD Zen5 enablement
cxl, doc: Moving conventions in separate files
cxl, doc: Remove isonum.txt inclusion
|
|
SPI target mode currently lacks a mechanism to gracefully abort ongoing
transfers when the client or core needs to cancel active transactions.
Implement spi_geni_target_abort() to handle aborting SPI target
operations when the client and core want to cancel ongoing transfers.
This provides a mechanism for graceful termination of active SPI
transactions in target mode.
Signed-off-by: Praveen Talari <praveen.talari@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://patch.msgid.link/20260204162854.1206323-5-praveen.talari@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The timeout helpers (handle_se_timeout() and handle_gpi_timeout())
took a 'struct spi_message *msg' that was never used. Remove this
parameter and adjust the callers to simplify the interfaces.
Signed-off-by: Praveen Talari <praveen.talari@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://patch.msgid.link/20260204162854.1206323-4-praveen.talari@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The driver currently skips the abort sequence for target mode when serial
engine errors occur. This leads to improper error recovery as the serial
engine may remain in an undefined state without proper cleanup, potentially
causing subsequent operations to fail or behave unpredictably.
Fix this by ensuring the abort sequence and DMA reset always execute during
error recovery, as both are required for proper serial engine error
handling.
Co-developed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Praveen Talari <praveen.talari@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://patch.msgid.link/20260204162854.1206323-3-praveen.talari@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
functions
The current implementation always allocates a host controller and sets the
target flag later when the "spi-slave" device tree property is present.
This approach is suboptimal as it doesn't utilize the dedicated allocation
functions designed for target mode.
Use devm_spi_alloc_target() when "spi-slave" device tree property is
present, otherwise use devm_spi_alloc_host(). This replaces the previous
approach of always allocating a host controller and setting target flag
later.
Signed-off-by: Praveen Talari <praveen.talari@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://patch.msgid.link/20260204162854.1206323-2-praveen.talari@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Kuniyuki Iwashima says:
====================
bpf: Misc changes around AF_UNIX.
Patch 1 adapts sk_is_XXX() helpers in __cgroup_bpf_run_filter_sock_addr().
Patch 2 removes an unnecessary sk_fullsock() in bpf_skc_to_unix_sock().
====================
Link: https://patch.msgid.link/20260203213442.682838-1-kuniyu@google.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
AF_UNIX does not use TCP_NEW_SYN_RECV nor TCP_TIME_WAIT and
checking sk->sk_family is sufficient.
Let's remove sk_fullsock() and use sk_is_unix() in
bpf_skc_to_unix_sock().
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20260203213442.682838-3-kuniyu@google.com
|
|
sk->sk_family should be read with READ_ONCE() in
__cgroup_bpf_run_filter_sock_addr() due to IPV6_ADDRFORM.
Also, the comment there is a bit stale since commit 859051dd165e
("bpf: Implement cgroup sockaddr hooks for unix sockets"), and the
kdoc has the same comment.
Let's use sk_is_inet() and sk_is_unix() and remove the comment.
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20260203213442.682838-2-kuniyu@google.com
|
|
Final KVM fixes for 6.19:
- Fix a bug where AVIC is incorrectly inhibited when running with x2AVIC
disabled via module param (or on a system without x2AVIC).
- Fix a dangling device posted IRQs bug by explicitly checking if the irqfd is
still active (on the list) when handling an eventfd signal, instead of
zeroing the irqfd's routing information when the irqfd is deassigned.
Zeroing the irqfd's routing info causes arm64 and x86's to not disable
posting for the IRQ (kvm_arch_irq_bypass_del_producer() looks for an MSI),
incorrectly leaving the IRQ in posted mode (and leading to use-after-free
and memory leaks on AMD in particular).
This is both the most pressing and scariest, but it's been in -next for
a while.
- Disable FORTIFY_SOURCE for KVM selftests to prevent the compiler from
generating calls to the checked versions of memset() and friends, which
leads to unexpected page faults in guest code due e.g. __memset_chk@plt
not being resolved.
- Explicitly configure the support XSS from within {svm,vmx}_set_cpu_caps() to
fix a bug where VMX will compute the reference VMCS configuration with SHSTK
and IBT enabled, but then compute each CPUs local config with SHSTK and IBT
disabled if not all CET xfeatures are enabled, e.g. if the kernel is built
with X86_KERNEL_IBT=n. The mismatch in features results in differing nVMX
setting, and ultimately causes kvm-intel.ko to refuse to load with nested=1.
|
|
The second kill_bdev() call in set_blocksize() is redundant as the first
call already clears all buffers and pagecache, and locks prevent new
pagecache creation between the calls.
Signed-off-by: Yang Xiuwei <yangxiuwei@kylinos.cn>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC fixes from Arnd Bergmann:
"Shawn Guo is moving on from maintaining the NXP i.MX platform and
hands over to Frank Li. Shawn has maintained the platform for 15 years
after initially upstreaming support for i.MX6 and i.MX23/28, and his
work has helped make this the most important industrial embedded Linux
platform. Roughly one out of five devicetree files in mainline kernels
are for the wider i.MX platform. Many thanks to Shawn for the taking
care of the platform all these years!
There are also two additional updates for the MAINTAINERS file, and a
fix for error handling in the qualcomm smem driver"
* tag 'soc-fixes-6.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
MAINTAINERS: Change Sudeep Holla's email address
MAINTAINERS: Add myself as maintainer of hisi_soc_hha
soc: qcom: smem: fix qcom_smem_is_available and check if __smem is valid
MAINTAINERS: Replace Shawn with Frank as i.MX platform maintainer
|
|
The root decoder provides the callbacks hpa_to_spa and spa_to_hpa to
perform Host Physical Address (HPA) and System Physical Address
translations, respectively. The callbacks are required to convert
addresses when HPA != SPA. XOR interleaving depends on this mechanism,
and the necessary handlers are implemented.
The translation handlers are used for poison injection
(trace_cxl_poison, cxl_poison_inject_fops) and error handling
(cxl_event_trace_record).
In AMD Zen5 systems with Normalized Addressing, endpoint addresses are
not SPAs, and translation handlers are required for these features to
function correctly.
Now, as ACPI PRM translation could be expensive in tracing or error
handling code paths, do not yet enable translations to avoid its
intensive use. Instead, disable those features which are used only for
debugging and enhanced logging.
Introduce the flag CXL_REGION_F_NORMALIZED_ADDRESSING that indicates
Normalized Addressing for a region and use it to disable poison injection
and DPA to HPA conversion.
Note: Dropped unused CXL_DECODER_F_MASK macro.
[dj: Fix commit log CXL_REGION_F_NORM_ADDR to
CXL_REGION_F_NORMALIZED_ADDRESSING ]
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Signed-off-by: Robert Richter <rrichter@amd.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://patch.msgid.link/20260114164837.1076338-14-rrichter@amd.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
|
|
Poison injection setup code is embedded in cxl_region_probe(). For
improved encapsulation, readability, and maintainability, factor out
code into function cxl_region_setup_poison().
This patch is a prerequisite to disable poison by region offset for
Normalized Addressing.
No functional changes.
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Signed-off-by: Robert Richter <rrichter@amd.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Link: https://patch.msgid.link/20260114164837.1076338-13-rrichter@amd.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
|
|
The current kernel implementation does not support endpoint setup with
Normalized Addressing. It only translates an endpoint's DPA to the SPA
range of the host bridge. Therefore, the endpoint address range cannot
be determined, making a non-auto setup impossible. If a decoder
requires address translation, reprogramming should be disabled and the
decoder locked.
The BIOS, however, provides all the necessary address translation
data, which the kernel can use to reconfigure endpoint decoders with
normalized addresses. Locking the decoders in the BIOS would prevent a
capable kernel (or other operating systems) from shutting down
auto-generated regions and managing resources dynamically.
Reviewed-by: Gregory Price <gourry@gourry.net>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Tested-by: Gregory Price <gourry@gourry.net>
Signed-off-by: Robert Richter <rrichter@amd.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>> ---
Link: https://patch.msgid.link/20260114164837.1076338-12-rrichter@amd.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
|
|
Add AMD Zen5 support for address translation.
Zen5 systems may be configured to use 'Normalized addresses'. Then,
host physical addresses (HPA) are different from their system physical
addresses (SPA). The endpoint has its own physical address space and
an incoming HPA is already converted to the device's physical address
(DPA). Thus it has interleaving disabled and CXL endpoints are
programmed passthrough (DPA == HPA).
Host Physical Addresses (HPAs) need to be translated from the endpoint
to its CXL host bridge, esp. to identify the endpoint's root decoder
and region's address range. ACPI Platform Runtime Mechanism (PRM)
provides a handler to translate the DPA to its SPA. This is documented
in:
AMD Family 1Ah Models 00h–0Fh and Models 10h–1Fh
ACPI v6.5 Porting Guide, Publication # 58088
https://www.amd.com/en/search/documentation/hub.html
With Normalized Addressing this PRM handler must be used to translate
an HPA of an endpoint to its SPA.
Do the following to implement AMD Zen5 address translation:
Introduce a new file core/atl.c to handle ACPI PRM specific address
translation code. Naming is loosely related to the kernel's AMD
Address Translation Library (CONFIG_AMD_ATL) but implementation does
not depend on it, nor it is vendor specific. Use Kbuild and Kconfig
options respectively to enable the code depending on architecture and
platform options.
AMD Zen5 systems support the ACPI PRM CXL Address Translation firmware
call (see ACPI v6.5 Porting Guide, Address Translation - CXL DPA to
System Physical Address). Firmware enables the PRM handler if the
platform has address translation implemented. Check firmware and
kernel support of ACPI PRM using the specific GUID. On success enable
address translation by setting up the earlier introduced root port
callback, see function cxl_prm_setup_translation(). Setup is done in
cxl_setup_prm_address_translation(), it is the only function that
needs to be exported. For low level PRM firmware calls, use the ACPI
framework.
Identify the region's interleaving ways by inspecting the address
ranges. Also determine the interleaving granularity using the address
translation callback. Note that the position of the chunk from one
interleaving block to the next may vary and thus cannot be considered
constant. Address offsets larger than the interleaving block size
cannot be used to calculate the granularity. Thus, probe the
granularity using address translation for various HPAs in the same
interleaving block.
[ dj: Add atl.o build to cxl_test ]
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Tested-by: Gregory Price <gourry@gourry.net>
Signed-off-by: Robert Richter <rrichter@amd.com>
Link: https://patch.msgid.link/20260114164837.1076338-11-rrichter@amd.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.19
A bunch more small fixes here, plus some more of the constant stream of
quirks. The most notable change here is Richard's change to the cs_dsp
code for the KUnit tests which is relatively large, mostly due to
boilerplate. The tests were triggering large numbers of error messages
as part of verifying that problems with input data are appropriately
detected which in turn caused runtime issues for the framework due to
the performance impact of pushing the logging out, while the logging is
valuable in normal operation it's basically useless while doing tests
designed to trigger it so rate limiting is an appropriate fix.
|
|
This test allows to test the various storage key handling functions.
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
|
|
Add a new IOCTL to allow userspace to manipulate storage keys directly.
This will make it easier to write selftests related to storage keys.
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
|
|
While userspace is allowed to have pages of any size, the new gmap
would always use 4k pages to back the guest.
Enable 1M pages for gmap.
This allows 1M pages to be used to back a guest when userspace is using
1M pages for the corresponding addresses (e.g. THP or hugetlbfs).
Remove the limitation that disallowed having nested guests and
hugepages at the same time.
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
|
|
Remove the PGSTE config option.
Remove all code from linux/s390 mm that involves PGSTEs.
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
|
|
Remove the now unused include/asm/gmap.h and mm/gmap.c files.
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
|
|
Switch KVM/s390 to use the new gmap code.
Remove includes to <gmap.h> and include "gmap.h" instead; fix all the
existing users of the old gmap functions to use the new ones instead.
Fix guest storage key access functions to work with the new gmap.
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
|
|
Refactor some storage key functions to improve readability.
Introduce helper functions that will be used in the next patches.
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
|
|
Switch to using IS_ENABLED(CONFIG_KVM) instead of CONFIG_PGSTE, since
the latter will be removed soon.
Many CONFIG_PGSTE are left behind, because they will be removed
completely in upcoming patches. The ones replaced here are mostly the
ones that will stay.
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
|
|
Implement gmap_protect_asce_top_level(), which was a stub. This
function was a stub due to cross dependencies with other patches.
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
|
|
Add some helper functions for handling multiple guest faults at the
same time.
This will be needed for VSIE, where a nested guest access also needs to
access all the page tables that map it.
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
|
|
New gmap (guest map) code. This new gmap code will only be used by KVM.
This will replace the existing gmap.
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
|
|
Add page table management functions to be used for KVM guest (gmap)
page tables.
This patch adds functions to handle CMMA and the ESSA instruction.
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
|
|
Add page table management functions to be used for KVM guest (gmap)
page tables.
This patch adds functions to handle memslot creation and destruction,
additional per-pagetable data stored in the PGSTEs, mapping physical
addresses into the gmap, and marking address ranges as prefix.
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
|
|
Add page table management functions to be used for KVM guest (gmap)
page tables.
This patch adds functions related to storage key handling.
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
|
|
Add page table management functions to be used for KVM guest (gmap)
page tables.
This patch adds functions to walk to specific table entries, or to
perform actions on a range of entries.
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
|
|
Add page table management functions to be used for KVM guest (gmap)
page tables.
This patch adds functions to clear, replace or exchange DAT table
entries.
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
|
|
Add page table management functions to be used for KVM guest (gmap)
page tables.
This patch adds the boilerplate and functions for the allocation and
deallocation of DAT tables.
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
|
|
Add KVM-s390 specific bitfields and helper functions to manipulate DAT
tables.
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
|
|
Rename some functions in gaccess.c to add a _gva or _gpa suffix to
indicate whether the function accepts a virtual or a guest-absolute
address.
This makes it easier to understand the code.
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Reviewed-by: Christoph Schlameuss <schlameuss@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
|
|
Enable KVM_GENERIC_MMU_NOTIFIER, for now with empty placeholder callbacks.
Also enable KVM_MMU_LOCKLESS_AGING and define KVM_HAVE_MMU_RWLOCK.
Acked-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Reviewed-by: Christoph Schlameuss <schlameuss@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
|
|
Pass the gmap explicitly as parameter, instead of just using
vsie_page->gmap.
This will be used in upcoming patches.
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
|
|
If uv_convert_from_secure_pte() fails, the page becomes unusable by the
host. The failure can only occour in case of hardware malfunction or a
serious KVM bug.
When the unusable page is reused, the system can have issues and
hang.
Print a warning to aid debugging such unlikely scenarios.
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
|
