| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- "powerpc/64s: do not re-activate batched TLB flush" makes
arch_{enter|leave}_lazy_mmu_mode() nest properly (Alexander Gordeev)
It adds a generic enter/leave layer and switches architectures to use
it. Various hacks were removed in the process.
- "zram: introduce compressed data writeback" implements data
compression for zram writeback (Richard Chang and Sergey Senozhatsky)
- "mm: folio_zero_user: clear page ranges" adds clearing of contiguous
page ranges for hugepages. Large improvements during demand faulting
are demonstrated (David Hildenbrand)
- "memcg cleanups" tidies up some memcg code (Chen Ridong)
- "mm/damon: introduce {,max_}nr_snapshots and tracepoint for damos
stats" improves DAMOS stat's provided information, deterministic
control, and readability (SeongJae Park)
- "selftests/mm: hugetlb cgroup charging: robustness fixes" fixes a few
issues in the hugetlb cgroup charging selftests (Li Wang)
- "Fix va_high_addr_switch.sh test failure - again" addresses several
issues in the va_high_addr_switch test (Chunyu Hu)
- "mm/damon/tests/core-kunit: extend existing test scenarios" improves
the KUnit test coverage for DAMON (Shu Anzai)
- "mm/khugepaged: fix dirty page handling for MADV_COLLAPSE" fixes a
glitch in khugepaged which was causing madvise(MADV_COLLAPSE) to
transiently return -EAGAIN (Shivank Garg)
- "arch, mm: consolidate hugetlb early reservation" reworks and
consolidates a pile of straggly code related to reservation of
hugetlb memory from bootmem and creation of CMA areas for hugetlb
(Mike Rapoport)
- "mm: clean up anon_vma implementation" cleans up the anon_vma
implementation in various ways (Lorenzo Stoakes)
- "tweaks for __alloc_pages_slowpath()" does a little streamlining of
the page allocator's slowpath code (Vlastimil Babka)
- "memcg: separate private and public ID namespaces" cleans up the
memcg ID code and prevents the internal-only private IDs from being
exposed to userspace (Shakeel Butt)
- "mm: hugetlb: allocate frozen gigantic folio" cleans up the
allocation of frozen folios and avoids some atomic refcount
operations (Kefeng Wang)
- "mm/damon: advance DAMOS-based LRU sorting" improves DAMOS's movement
of memory betewwn the active and inactive LRUs and adds auto-tuning
of the ratio-based quotas and of monitoring intervals (SeongJae Park)
- "Support page table check on PowerPC" makes
CONFIG_PAGE_TABLE_CHECK_ENFORCED work on powerpc (Andrew Donnellan)
- "nodemask: align nodes_and{,not} with underlying bitmap ops" makes
nodes_and() and nodes_andnot() propagate the return values from the
underlying bit operations, enabling some cleanup in calling code
(Yury Norov)
- "mm/damon: hide kdamond and kdamond_lock from API callers" cleans up
some DAMON internal interfaces (SeongJae Park)
- "mm/khugepaged: cleanups and scan limit fix" does some cleanup work
in khupaged and fixes a scan limit accounting issue (Shivank Garg)
- "mm: balloon infrastructure cleanups" goes to town on the balloon
infrastructure and its page migration function. Mainly cleanups, also
some locking simplification (David Hildenbrand)
- "mm/vmscan: add tracepoint and reason for kswapd_failures reset" adds
additional tracepoints to the page reclaim code (Jiayuan Chen)
- "Replace wq users and add WQ_PERCPU to alloc_workqueue() users" is
part of Marco's kernel-wide migration from the legacy workqueue APIs
over to the preferred unbound workqueues (Marco Crivellari)
- "Various mm kselftests improvements/fixes" provides various unrelated
improvements/fixes for the mm kselftests (Kevin Brodsky)
- "mm: accelerate gigantic folio allocation" greatly speeds up gigantic
folio allocation, mainly by avoiding unnecessary work in
pfn_range_valid_contig() (Kefeng Wang)
- "selftests/damon: improve leak detection and wss estimation
reliability" improves the reliability of two of the DAMON selftests
(SeongJae Park)
- "mm/damon: cleanup kdamond, damon_call(), damos filter and
DAMON_MIN_REGION" does some cleanup work in the core DAMON code
(SeongJae Park)
- "Docs/mm/damon: update intro, modules, maintainer profile, and misc"
performs maintenance work on the DAMON documentation (SeongJae Park)
- "mm: add and use vma_assert_stabilised() helper" refactors and cleans
up the core VMA code. The main aim here is to be able to use the mmap
write lock's lockdep state to perform various assertions regarding
the locking which the VMA code requires (Lorenzo Stoakes)
- "mm, swap: swap table phase II: unify swapin use" removes some old
swap code (swap cache bypassing and swap synchronization) which
wasn't working very well. Various other cleanups and simplifications
were made. The end result is a 20% speedup in one benchmark (Kairui
Song)
- "enable PT_RECLAIM on more 64-bit architectures" makes PT_RECLAIM
available on 64-bit alpha, loongarch, mips, parisc, and um. Various
cleanups were performed along the way (Qi Zheng)
* tag 'mm-stable-2026-02-11-19-22' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (325 commits)
mm/memory: handle non-split locks correctly in zap_empty_pte_table()
mm: move pte table reclaim code to memory.c
mm: make PT_RECLAIM depends on MMU_GATHER_RCU_TABLE_FREE
mm: convert __HAVE_ARCH_TLB_REMOVE_TABLE to CONFIG_HAVE_ARCH_TLB_REMOVE_TABLE config
um: mm: enable MMU_GATHER_RCU_TABLE_FREE
parisc: mm: enable MMU_GATHER_RCU_TABLE_FREE
mips: mm: enable MMU_GATHER_RCU_TABLE_FREE
LoongArch: mm: enable MMU_GATHER_RCU_TABLE_FREE
alpha: mm: enable MMU_GATHER_RCU_TABLE_FREE
mm: change mm/pt_reclaim.c to use asm/tlb.h instead of asm-generic/tlb.h
mm/damon/stat: remove __read_mostly from memory_idle_ms_percentiles
zsmalloc: make common caches global
mm: add SPDX id lines to some mm source files
mm/zswap: use %pe to print error pointers
mm/vmscan: use %pe to print error pointers
mm/readahead: fix typo in comment
mm: khugepaged: fix NR_FILE_PAGES and NR_SHMEM in collapse_file()
mm: refactor vma_map_pages to use vm_insert_pages
mm/damon: unify address range representation with damon_addr_range
mm/cma: replace snprintf with strscpy in cma_new_area
...
|
|
Signed-off-by: Rhys Tumelty <rhys@tumelty.co.uk>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20260128220233.179439-1-rhys@tumelty.co.uk>
|
|
DAMOS stats on sysfs was only manually updated. Recent addition of
'refresh_ms' knob enabled periodic and automated updates of the stats.
The document for stats update process is not updated for the change,
however. Update.
Link: https://lkml.kernel.org/r/20260118180305.70023-7-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: David Hildenbrand <david@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
DAMON usage document provides a list of available DAMON interfaces with
brief introduction at the beginning of the doc. The list is missing DAMON
modules for special purposes, while it is one of the major suggested
interfaces. Add an item for those to the list.
Link: https://lkml.kernel.org/r/20260118180305.70023-6-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: David Hildenbrand <david@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
While compaction depends on migration, the other direction is not the
case. So let's make it clearer that this is all about migration of
balloon pages.
Adjust all comments/docs in the core to talk about "migration" instead of
"compaction".
While at it add some "/* CONFIG_BALLOON_MIGRATION */".
Link: https://lkml.kernel.org/r/20260119230133.3551867-23-david@kernel.org
Signed-off-by: David Hildenbrand (Red Hat) <david@kernel.org>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Eugenio Pérez <eperezma@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Jerrin Shaji George <jerrin.shaji-george@broadcom.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: SeongJae Park <sj@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Document a newly added DAMON_LRU_SORT module parameter for using
monitoring intervals auto-tuning feature of DAMON.
Link: https://lkml.kernel.org/r/20260113152717.70459-12-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Acked-by: wang lian <lianux.mm@gmail.com>
Cc: David Hildenbrand <david@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Document a newly added DAMON_LRU_SORT parameter for doing auto-tuning
aiming an active to inactive memory size ratio.
Link: https://lkml.kernel.org/r/20260113152717.70459-10-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Acked-by: wang lian <lianux.mm@gmail.com>
Cc: David Hildenbrand <david@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Document the new DAMON_LRU_SORT parameter, filter_young_pages. It can be
used to use page level access re-check for the LRU sorting.
Link: https://lkml.kernel.org/r/20260113152717.70459-8-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Acked-by: wang lian <lianux.mm@gmail.com>
Cc: David Hildenbrand <david@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This reintroduces a concept removed by: commit d6cb41cc44c6 ("mm, hugetlb:
remove hugepages_treat_as_movable sysctl")
This sysctl provides flexibility between ZONE_MOVABLE use cases:
1) onlining memory in ZONE_MOVABLE to maintain hotplug compatibility
2) onlining memory in ZONE_MOVABLE to make hugepage allocate reliable
When ZONE_MOVABLE is used to make huge page allocation more reliable,
disallowing gigantic pages memory in this region is pointless. If hotplug
is not a requirement, we can loosen the restrictions to allow 1GB gigantic
pages in ZONE_MOVABLE.
Since 1GB can be difficult to migrate / has impacts on compaction /
defragmentation, we don't enable this by default. Notably, 1GB pages can
only be migrated if another 1GB page is available - so hot-unplug will
fail if such a page cannot be found.
However, since there are scenarios where gigantic pages are migratable, we
should allow use of these on movable regions.
When not valid 1GB is available for migration, hot-unplug will retry
indefinitely (or until interrupted). For example:
echo 0 > node0/hugepages/..-1GB/nr_hugepages # clear node0 1GB pages
echo 1 > node1/hugepages/..-1GB/nr_hugepages # reserve node1 1GB page
./alloc_huge_node1 & # Allocate a 1GB page on node1
./node1_offline & # attempt to offline all node1 memory
echo 1 > node0/hugepages/..-1GB/nr_hugepages # reserve node0 1GB page
In this example, node1_offline will block indefinitely until the final
step, when a node0 1GB page is made available.
Note: Boot-time CMA is not possible for driver-managed hotplug memory, as
CMA requires the memory to be registered as SystemRAM at boot time.
Additionally, 1GB huge pages are not supported by THP.
Link: https://lkml.kernel.org/r/20251221125603.2364174-1-gourry@gourry.net
Signed-off-by: Gregory Price <gourry@gourry.net>
Suggested-by: David Rientjes <rientjes@google.com>
Link: https://lore.kernel.org/all/20180201193132.Hk7vI_xaU%25akpm@linux-foundation.org/
Acked-by: David Hildenbrand (Red Hat) <david@kernel.org>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Michal Hocko <mhocko@suse.com>
Cc: "David Hildenbrand (Red Hat)" <david@kernel.org>
Cc: Gregory Price <gourry@gourry.net>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Update DAMON usage document for the newly added DAMON sysfs interface
file, max_nr_snapshots.
Link: https://lkml.kernel.org/r/20251216080128.42991-11-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: "Masami Hiramatsu (Google)" <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Update DAMON usage document for the newly added damos stat, nr_snapshots.
Link: https://lkml.kernel.org/r/20251216080128.42991-5-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: "Masami Hiramatsu (Google)" <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Since v4.6 the BUDDY flag is set for _all_ pages in the block
and no longer just for the first one.
This change was introduced by:
commit 832fc1de01ae ("/proc/kpageflags: return KPF_BUDDY for "tail" buddy pages")
Strictly speaking, this was an ABI change, but as nobody has noticed
since 2016, let's just update the documentation.
Link: https://lkml.kernel.org/r/20251122211920.3410371-1-richard@nod.at
Signed-off-by: Richard Weinberger <richard@nod.at>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Acked-by: David Hildenbrand (Red Hat) <david@kernel.org>
Reviewed-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Cc: Vladimir Davydov <vdavydov@virtuozzo.com>>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "mm/swapfile.c: select swap devices of default priority round
robin", v5.
Currently, on system with multiple swap devices, swap allocation will
select one swap device according to priority. The swap device with the
highest priority will be chosen to allocate firstly.
People can specify a priority from 0 to 32767 when swapon a swap device,
or the system will set it from -2 then downwards by default. Meanwhile,
on NUMA system, the swap device with node_id will be considered first on
that NUMA node of the node_id.
In the current code, an array of plist, swap_avail_heads[nid], is used to
organize swap devices on each NUMA node. For each NUMA node, there is a
plist organizing all swap devices. The 'prio' value in the plist is the
negated value of the device's priority due to plist being sorted from low
to high. The swap device owning one node_id will be promoted to the front
position on that NUMA node, then other swap devices are put in order of
their default priority.
E.g I got a system with 8 NUMA nodes, and I setup 4 zram partition as
swap devices.
Current behaviour:
their priorities will be(note that -1 is skipped):
NAME TYPE SIZE USED PRIO
/dev/zram0 partition 16G 0B -2
/dev/zram1 partition 16G 0B -3
/dev/zram2 partition 16G 0B -4
/dev/zram3 partition 16G 0B -5
And their positions in the 8 swap_avail_lists[nid] will be:
swap_avail_lists[0]: /* node 0's available swap device list */
zram0 -> zram1 -> zram2 -> zram3
prio:1 prio:3 prio:4 prio:5
swap_avali_lists[1]: /* node 1's available swap device list */
zram1 -> zram0 -> zram2 -> zram3
prio:1 prio:2 prio:4 prio:5
swap_avail_lists[2]: /* node 2's available swap device list */
zram2 -> zram0 -> zram1 -> zram3
prio:1 prio:2 prio:3 prio:5
swap_avail_lists[3]: /* node 3's available swap device list */
zram3 -> zram0 -> zram1 -> zram2
prio:1 prio:2 prio:3 prio:4
swap_avail_lists[4-7]: /* node 4,5,6,7's available swap device list */
zram0 -> zram1 -> zram2 -> zram3
prio:2 prio:3 prio:4 prio:5
The adjustment for swap device with node_id intended to decrease the
pressure of lock contention for one swap device by taking different swap
device on different node. The adjustment was introduced in commit
a2468cc9bfdf ("swap: choose swap device according to numa node").
However, the adjustment is a little coarse-grained. On the node, the swap
device sharing the node's id will always be selected firstly by node's
CPUs until exhausted, then next one. And on other nodes where no swap
device shares its node id, swap device with priority '-2' will be selected
firstly until exhausted, then next with priority '-3'.
This is the swapon output during the process high pressure vm-scability
test is being taken. It's clearly showing zram0 is heavily exploited
until exhausted.
===================================
[root@hp-dl385g10-03 ~]# swapon
NAME TYPE SIZE USED PRIO
/dev/zram0 partition 16G 15.7G -2
/dev/zram1 partition 16G 3.4G -3
/dev/zram2 partition 16G 3.4G -4
/dev/zram3 partition 16G 2.6G -5
The node based strategy on selecting swap device is much better then the
old way one by one selecting swap device. However it is still
unreasonable because swap devices are assumed to have similar accessing
speed if no priority is specified when swapon. It's unfair and doesn't
make sense just because one swap device is swapped on firstly, its
priority will be higher than the one swapped on later.
So in this patchset, change is made to select the swap device round robin
if default priority. In code, the plist array swap_avail_heads[nid] is
replaced with a plist swap_avail_head which reverts commit a2468cc9bfdf.
Meanwhile, on top of the revert, further change is taken to make any
device w/o specified priority get the same default priority '-1'. Surely,
swap device with specified priority are always put foremost, this is not
impacted. If you care about their different accessing speed, then use
'swapon -p xx' to deploy priority for your swap devices.
New behaviour:
swap_avail_list: /* one global available swap device list */
zram0 -> zram1 -> zram2 -> zram3
prio:1 prio:1 prio:1 prio:1
This is the swapon output during the process high pressure vm-scability
being taken, all is selected round robin:
=======================================
[root@hp-dl385g10-03 linux]# swapon
NAME TYPE SIZE USED PRIO
/dev/zram0 partition 16G 12.6G -1
/dev/zram1 partition 16G 12.6G -1
/dev/zram2 partition 16G 12.6G -1
/dev/zram3 partition 16G 12.6G -1
With the change, we can see about 18% efficiency promotion as below:
vm-scability test:
==================
Test with:
usemem --init-time -O -y -x -n 31 2G (4G memcg, zram as swap)
Before: After:
System time: 637.92 s 526.74 s (lower is better)
Sum Throughput: 3546.56 MB/s 4207.56 MB/s (higher is better)
Single process Throughput: 114.40 MB/s 135.72 MB/s (higher is better)
free latency: 10138455.99 us 6810119.01 us (low is better)
This patch (of 2):
This reverts commit a2468cc9bfdf ("swap: choose swap device according to
numa node").
After this patch, the behaviour will change back to pre-commit
a2468cc9bfdf. Means the priority will be set from -1 then downwards by
default, and when swapping, it will exhault swap device one by one
according to priority from high to low. This is preparation work for
later change.
[root@hp-dl385g10-03 ~]# swapon
NAME TYPE SIZE USED PRIO
/dev/zram0 partition 16G 16G -1
/dev/zram1 partition 16G 966.2M -2
/dev/zram2 partition 16G 0B -3
/dev/zram3 partition 16G 0B -4
Link: https://lkml.kernel.org/r/20251028034308.929550-1-bhe@redhat.com
Link: https://lkml.kernel.org/r/20251028034308.929550-2-bhe@redhat.com
Signed-off-by: Baoquan He <bhe@redhat.com>
Suggested-by: Chris Li <chrisl@kernel.org>
Acked-by: Chris Li <chrisl@kernel.org>
Acked-by: Nhat Pham <nphamcs@gmail.com>
Reviewed-by: Kairui Song <kasong@tencent.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Kemeng Shi <shikemeng@huaweicloud.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Document the newly added obsolete_target DAMON sysfs file.
Link: https://lkml.kernel.org/r/20251023012535.69625-5-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Reviewed-by: Bijan Tabatabai <bijan311@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Allow to override defaults for shemem and tmpfs at config time. This is
consistent with how transparent hugepages can be configured.
Same results can be achieved with the existing
'transparent_hugepage_shmem' and 'transparent_hugepage_tmpfs' settings in
the kernel command line, but it is more convenient to define basic
settings at config time instead of changing kernel command line later.
Defaults for shmem and tmpfs were not changed. They are remained the same
as before: 'never' for both cases. Options 'deny' and 'force' are omitted
intentionally since these are special values and supposed to be used for
emergencies or testing and are not expected to be permanent ones.
Primary motivation for adding config option is to enable policy
enforcement at build time. In large-scale production environments (Meta's
for example), the kernel configuration is often maintained centrally close
to the kernel code itself and owned by the kernel engineers, while boot
parameters are managed independently (e.g. by provisioning systems). In
such setups, the kernel build defines the supported and expected behavior
in a single place, but there is no reliable or uniform control over the
kernel command line options.
A build-time default allows kernel integrators to enforce a predictable
hugepage policy for shmem/tmpfs on a base layer, ensuring reproducible
behavior and avoiding configuration drift caused by possible boot-time
differences.
In short, primary benefit is mostly operational: it provides a way to
codify preferred policy in the kernel configuration, which is versioned,
reviewed, and tested as part of the kernel build process, rather than
depending on potentially variable boot parameters.
[d@ilvokhin.com: v2]
Link: https://lkml.kernel.org/r/aQECPpjd-fU_TC79@shell.ilvokhin.com
Link: https://lkml.kernel.org/r/aPpv8sAa2sYgNu3L@shell.ilvokhin.com
Signed-off-by: Dmitry Ilvokhin <d@ilvokhin.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Acked-by: Kiryl Shutsemau <kas@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Commit a983a26d5298 ("mm/damon/stat: expose negative idle time")
introduced the negative idle time feature for DAMON_STAT. But it is not
documented. Document it on the usage document.
Link: https://lkml.kernel.org/r/20251026182216.118200-9-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Commit cc7ceb1d14b0 ("mm/damon/stat: expose the current tuned aggregation
interval"), has introduced 'aggr_interval_us' parameter for DAMON_STAT.
But the new parameter is not yet documented. Document it on the usage
document for the module.
Link: https://lkml.kernel.org/r/20251026182216.118200-8-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Commit 2e0fe9245d6b ("mm/damon/lru_sort: support addr_unit for
DAMON_LRU_SORT") introduced the 'addr_unit' parameter for DAMON_LRU_SORT.
But the usage document is not updated for that. Update the document.
Link: https://lkml.kernel.org/r/20251026182216.118200-7-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Commit 7db551fcfb2a ("mm/damon/reclaim: support addr_unit for
DAMON_RECLAIM") introduced the 'addr_unit' parameter for DAMON_RECLAIM.
But the usage document is not updated for that. Update the document.
Link: https://lkml.kernel.org/r/20251026182216.118200-6-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Committing a monitoring target with empty target regions is for keeping
the current monitoring results. This behavior was introduced by commit
973233600676 ("mm/damon/sysfs: update monitoring target regions for online
input commit"). The behavior is not documented, though. Update the usage
document for clarifying this behavior.
Link: https://lkml.kernel.org/r/20251026182216.118200-5-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
It is a contextual typo. Fix it.
Link: https://lkml.kernel.org/r/20251026182216.118200-4-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
A new DAMON sysfs interface file, namely 'path' has been added under DAMOS
quota goal directory, for specifying the cgroup for
DAMOS_QUOTA_NODE_MEMCG_{USED,FREE}_BP metrics. Document it on the usage
document.
Link: https://lkml.kernel.org/r/20251017212706.183502-10-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The change from commit 796c2c23e14e ("zswap: replace RB tree with xarray")
is not reflected on the document. Update the document.
Link: https://lkml.kernel.org/r/20251003203851.43128-5-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Acked-by: Yosry Ahmed <yosry.ahmed@linux.dev>
Acked-by: Nhat Pham <nphamcs@gmail.com>
Reviewed-by: Chengming Zhou <chengming.zhou@linux.dev>
Cc: Chris Li <chrisl@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Pull documentation updates from Jonathan Corbet:
"It has been a relatively busy cycle in docsland, with changes all
over:
- Bring the kernel memory-model docs into the Sphinx build in the
"literal include" mode.
- Lots of build-infrastructure work, further cleaning up long-term
kernel-doc technical debt. The sphinx-pre-install tool has been
converted to Python and updated for current systems.
- A new tool to detect when documents have been moved and generate
HTML redirects; this can be used on kernel.org (or any other site
hosting the rendered docs) to avoid breaking links.
- Automated processing of the YAML files describing the netlink
protocol.
- A significant update of the maintainer's PGP guide.
... and a seemingly endless series of typo fixes, build-problem fixes,
etc"
* tag 'docs-6.18' of git://git.lwn.net/linux: (193 commits)
Documentation/features: Update feature lists for 6.17-rc7
docs: remove cdomain.py
Documentation/process: submitting-patches: fix typo in "were do"
docs: dev-tools/lkmm: Fix typo of missing file extension
Documentation: trace: histogram: Convert ftrace docs cross-reference
Documentation: trace: histogram-design: Wrap introductory note in note:: directive
Documentation: trace: historgram-design: Separate sched_waking histogram section heading and the following diagram
Documentation: trace: histogram-design: Trim trailing vertices in diagram explanation text
Documentation: trace: histogram: Fix histogram trigger subsection number order
docs: driver-api: fix spelling of "buses".
Documentation: fbcon: Use admonition directives
Documentation: fbcon: Reindent 8th step of attach/detach/unload
Documentation: fbcon: Add boot options and attach/detach/unload section headings
docs: filesystems: sysfs: add remaining top level sysfs directory descriptions
docs: filesystems: sysfs: clarify symlink destinations in dev and bus/devices descriptions
docs: filesystems: sysfs: remove top level sysfs net directory
docs: maintainer: Fix ambiguous subheading formatting
docs: kdoc: a few more dump_typedef() tweaks
docs: kdoc: remove redundant comment stripping in dump_typedef()
docs: kdoc: remove some dead code in dump_typedef()
...
|
|
The example command doesn't work [1] on the latest DAMON user-space tool,
since --damos_action option is updated to receive multiple arguments, and
hence cannot know if the final argument is for deductible monitoring
target or an argument for --damos_action option. Add --target_pid option
to let damo understand it is for target pid.
Link: https://lkml.kernel.org/r/20250916032339.115817-5-sj@kernel.org
Link: https://github.com/damonitor/damo/pull/32 [2]
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Joshua Hahn <joshua.hahnjy@gmail.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
After commit acd7ccb284b8 ("mm: shmem: add large folio support for
tmpfs"), we have extended tmpfs to allow any sized large folios, rather
than just PMD-sized large folios.
The strategy discussed previously was:
: Considering that tmpfs already has the 'huge=' option to control the
: PMD-sized large folios allocation, we can extend the 'huge=' option to
: allow any sized large folios. The semantics of the 'huge=' mount option
: are:
:
: huge=never: no any sized large folios
: huge=always: any sized large folios
: huge=within_size: like 'always' but respect the i_size
: huge=advise: like 'always' if requested with madvise()
:
: Note: for tmpfs mmap() faults, due to the lack of a write size hint, still
: allocate the PMD-sized huge folios if huge=always/within_size/advise is
: set.
:
: Moreover, the 'deny' and 'force' testing options controlled by
: '/sys/kernel/mm/transparent_hugepage/shmem_enabled', still retain the same
: semantics. The 'deny' can disable any sized large folios for tmpfs, while
: the 'force' can enable PMD sized large folios for tmpfs.
This means that when tmpfs is mounted with 'huge=always' or
'huge=within_size', tmpfs will allow getting a highest order hint based on
the size of write() and fallocate() paths. It will then try each
allowable large order, rather than continually attempting to allocate
PMD-sized large folios as before.
However, this might break some user scenarios for those who want to use
PMD-sized large folios, such as the i915 driver which did not supply a
write size hint when allocating shmem [1].
Moreover, Hugh also complained that this will cause a regression in userspace
with 'huge=always' or 'huge=within_size'.
So, let's revisit the strategy for tmpfs large page allocation. A simple fix
would be to always try PMD-sized large folios first, and if that fails, fall
back to smaller large folios. This approach differs from the strategy for
large folio allocation used by other file systems, however, tmpfs is somewhat
different from other file systems, as quoted from David's opinion:
: There were opinions in the past that tmpfs should just behave like any
: other fs, and I think that's what we tried to satisfy here: use the write
: size as an indication.
:
: I assume there will be workloads where either approach will be beneficial.
: I also assume that workloads that use ordinary fs'es could benefit from
: the same strategy (start with PMD), while others will clearly not.
Link: https://lkml.kernel.org/r/10e7ac6cebe6535c137c064d5c5a235643eebb4a.1756888965.git.baolin.wang@linux.alibaba.com
Link: https://lore.kernel.org/lkml/0d734549d5ed073c80b11601da3abdd5223e1889.1753689802.git.baolin.wang@linux.alibaba.com/ [1]
Fixes: acd7ccb284b8 ("mm: shmem: add large folio support for tmpfs")
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Barry Song <baohua@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Mariano Pache <npache@redhat.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
With zswap using zsmalloc directly, there are no more in-tree users of
this code. Remove it.
With zpool gone, zsmalloc is now always a simple dependency and no
longer something the user needs to configure. Hide CONFIG_ZSMALLOC
from the user and have zswap and zram pull it in as needed.
Link: https://lkml.kernel.org/r/20250829162212.208258-3-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: SeongJae Park <sj@kernel.org>
Acked-by: Yosry Ahmed <yosry.ahmed@linux.dev>
Cc: Chengming Zhou <zhouchengming@bytedance.com>
Cc: Nhat Pham <nphamcs@gmail.com>
Cc: Vitaly Wool <vitaly.wool@konsulko.se>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Document addr_unit DAMON sysfs file on DAMON usage document.
Link: https://lkml.kernel.org/r/20250828171242.59810-10-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Quanmin Yan <yanquanmin1@huawei.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: ze zuo <zuoze1@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This includes the PR_SET_THP_DISABLE/PR_GET_THP_DISABLE pair of prctl
calls as well the newly introduced PR_THP_DISABLE_EXCEPT_ADVISED flag for
the PR_SET_THP_DISABLE prctl call.
Link: https://lkml.kernel.org/r/20250815135549.130506-5-usamaarif642@gmail.com
Signed-off-by: Usama Arif <usamaarif642@gmail.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Barry Song <baohua@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Jann Horn <jannh@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Mariano Pache <npache@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: SeongJae Park <sj@kernel.org>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yafang <laoar.shao@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Fix typos.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20250813200526.290420-4-helgaas@kernel.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
"As usual, many cleanups. The below blurbiage describes 42 patchsets.
21 of those are partially or fully cleanup work. "cleans up",
"cleanup", "maintainability", "rationalizes", etc.
I never knew the MM code was so dirty.
"mm: ksm: prevent KSM from breaking merging of new VMAs" (Lorenzo Stoakes)
addresses an issue with KSM's PR_SET_MEMORY_MERGE mode: newly
mapped VMAs were not eligible for merging with existing adjacent
VMAs.
"mm/damon: introduce DAMON_STAT for simple and practical access monitoring" (SeongJae Park)
adds a new kernel module which simplifies the setup and usage of
DAMON in production environments.
"stop passing a writeback_control to swap/shmem writeout" (Christoph Hellwig)
is a cleanup to the writeback code which removes a couple of
pointers from struct writeback_control.
"drivers/base/node.c: optimization and cleanups" (Donet Tom)
contains largely uncorrelated cleanups to the NUMA node setup and
management code.
"mm: userfaultfd: assorted fixes and cleanups" (Tal Zussman)
does some maintenance work on the userfaultfd code.
"Readahead tweaks for larger folios" (Ryan Roberts)
implements some tuneups for pagecache readahead when it is reading
into order>0 folios.
"selftests/mm: Tweaks to the cow test" (Mark Brown)
provides some cleanups and consistency improvements to the
selftests code.
"Optimize mremap() for large folios" (Dev Jain)
does that. A 37% reduction in execution time was measured in a
memset+mremap+munmap microbenchmark.
"Remove zero_user()" (Matthew Wilcox)
expunges zero_user() in favor of the more modern memzero_page().
"mm/huge_memory: vmf_insert_folio_*() and vmf_insert_pfn_pud() fixes" (David Hildenbrand)
addresses some warts which David noticed in the huge page code.
These were not known to be causing any issues at this time.
"mm/damon: use alloc_migrate_target() for DAMOS_MIGRATE_{HOT,COLD" (SeongJae Park)
provides some cleanup and consolidation work in DAMON.
"use vm_flags_t consistently" (Lorenzo Stoakes)
uses vm_flags_t in places where we were inappropriately using other
types.
"mm/memfd: Reserve hugetlb folios before allocation" (Vivek Kasireddy)
increases the reliability of large page allocation in the memfd
code.
"mm: Remove pXX_devmap page table bit and pfn_t type" (Alistair Popple)
removes several now-unneeded PFN_* flags.
"mm/damon: decouple sysfs from core" (SeongJae Park)
implememnts some cleanup and maintainability work in the DAMON
sysfs layer.
"madvise cleanup" (Lorenzo Stoakes)
does quite a lot of cleanup/maintenance work in the madvise() code.
"madvise anon_name cleanups" (Vlastimil Babka)
provides additional cleanups on top or Lorenzo's effort.
"Implement numa node notifier" (Oscar Salvador)
creates a standalone notifier for NUMA node memory state changes.
Previously these were lumped under the more general memory
on/offline notifier.
"Make MIGRATE_ISOLATE a standalone bit" (Zi Yan)
cleans up the pageblock isolation code and fixes a potential issue
which doesn't seem to cause any problems in practice.
"selftests/damon: add python and drgn based DAMON sysfs functionality tests" (SeongJae Park)
adds additional drgn- and python-based DAMON selftests which are
more comprehensive than the existing selftest suite.
"Misc rework on hugetlb faulting path" (Oscar Salvador)
fixes a rather obscure deadlock in the hugetlb fault code and
follows that fix with a series of cleanups.
"cma: factor out allocation logic from __cma_declare_contiguous_nid" (Mike Rapoport)
rationalizes and cleans up the highmem-specific code in the CMA
allocator.
"mm/migration: rework movable_ops page migration (part 1)" (David Hildenbrand)
provides cleanups and future-preparedness to the migration code.
"mm/damon: add trace events for auto-tuned monitoring intervals and DAMOS quota" (SeongJae Park)
adds some tracepoints to some DAMON auto-tuning code.
"mm/damon: fix misc bugs in DAMON modules" (SeongJae Park)
does that.
"mm/damon: misc cleanups" (SeongJae Park)
also does what it claims.
"mm: folio_pte_batch() improvements" (David Hildenbrand)
cleans up the large folio PTE batching code.
"mm/damon/vaddr: Allow interleaving in migrate_{hot,cold} actions" (SeongJae Park)
facilitates dynamic alteration of DAMON's inter-node allocation
policy.
"Remove unmap_and_put_page()" (Vishal Moola)
provides a couple of page->folio conversions.
"mm: per-node proactive reclaim" (Davidlohr Bueso)
implements a per-node control of proactive reclaim - beyond the
current memcg-based implementation.
"mm/damon: remove damon_callback" (SeongJae Park)
replaces the damon_callback interface with a more general and
powerful damon_call()+damos_walk() interface.
"mm/mremap: permit mremap() move of multiple VMAs" (Lorenzo Stoakes)
implements a number of mremap cleanups (of course) in preparation
for adding new mremap() functionality: newly permit the remapping
of multiple VMAs when the user is specifying MREMAP_FIXED. It still
excludes some specialized situations where this cannot be performed
reliably.
"drop hugetlb_free_pgd_range()" (Anthony Yznaga)
switches some sparc hugetlb code over to the generic version and
removes the thus-unneeded hugetlb_free_pgd_range().
"mm/damon/sysfs: support periodic and automated stats update" (SeongJae Park)
augments the present userspace-requested update of DAMON sysfs
monitoring files. Automatic update is now provided, along with a
tunable to control the update interval.
"Some randome fixes and cleanups to swapfile" (Kemeng Shi)
does what is claims.
"mm: introduce snapshot_page" (Luiz Capitulino and David Hildenbrand)
provides (and uses) a means by which debug-style functions can grab
a copy of a pageframe and inspect it locklessly without tripping
over the races inherent in operating on the live pageframe
directly.
"use per-vma locks for /proc/pid/maps reads" (Suren Baghdasaryan)
addresses the large contention issues which can be triggered by
reads from that procfs file. Latencies are reduced by more than
half in some situations. The series also introduces several new
selftests for the /proc/pid/maps interface.
"__folio_split() clean up" (Zi Yan)
cleans up __folio_split()!
"Optimize mprotect() for large folios" (Dev Jain)
provides some quite large (>3x) speedups to mprotect() when dealing
with large folios.
"selftests/mm: reuse FORCE_READ to replace "asm volatile("" : "+r" (XXX));" and some cleanup" (wang lian)
does some cleanup work in the selftests code.
"tools/testing: expand mremap testing" (Lorenzo Stoakes)
extends the mremap() selftest in several ways, including adding
more checking of Lorenzo's recently added "permit mremap() move of
multiple VMAs" feature.
"selftests/damon/sysfs.py: test all parameters" (SeongJae Park)
extends the DAMON sysfs interface selftest so that it tests all
possible user-requested parameters. Rather than the present minimal
subset"
* tag 'mm-stable-2025-07-30-15-25' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (370 commits)
MAINTAINERS: add missing headers to mempory policy & migration section
MAINTAINERS: add missing file to cgroup section
MAINTAINERS: add MM MISC section, add missing files to MISC and CORE
MAINTAINERS: add missing zsmalloc file
MAINTAINERS: add missing files to page alloc section
MAINTAINERS: add missing shrinker files
MAINTAINERS: move memremap.[ch] to hotplug section
MAINTAINERS: add missing mm_slot.h file THP section
MAINTAINERS: add missing interval_tree.c to memory mapping section
MAINTAINERS: add missing percpu-internal.h file to per-cpu section
mm/page_alloc: remove trace_mm_alloc_contig_migrate_range_info()
selftests/damon: introduce _common.sh to host shared function
selftests/damon/sysfs.py: test runtime reduction of DAMON parameters
selftests/damon/sysfs.py: test non-default parameters runtime commit
selftests/damon/sysfs.py: generalize DAMON context commit assertion
selftests/damon/sysfs.py: generalize monitoring attributes commit assertion
selftests/damon/sysfs.py: generalize DAMOS schemes commit assertion
selftests/damon/sysfs.py: test DAMOS filters commitment
selftests/damon/sysfs.py: generalize DAMOS scheme commit assertion
selftests/damon/sysfs.py: test DAMOS destinations commitment
...
|
|
Rather confusingly, setting all Transparent Huge Page sysfs settings to
"never" does not in fact result in THP being globally disabled.
Rather, it results in khugepaged being disabled, but one can still obtain
THP pages using madvise(..., MADV_COLLAPSE).
This is something that has remained poorly documented for some time, and
it is likely the received wisdom of most users of THP that never does, in
fact, mean never.
It is therefore important to highlight, very clearly, that this is not the
case.
[lorenzo.stoakes@oracle.com: update transhuge page to mention MADV_COLLAPSE]
Link: https://lkml.kernel.org/r/d54d1dfb-f06d-4979-983b-73998f05867e@lucifer.local
Link: https://lkml.kernel.org/r/20250721155530.75944-1-lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Acked-by: SeongJae Park <sj@kernel.org>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Barry Song <baohua@kernel.org>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Mariano Pache <npache@redhat.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Document the new DAMON sysfs file, refresh_ms, on the usage document.
Link: https://lkml.kernel.org/r/20250717055448.56976-4-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Document the newly added DAMOS action destination directory of the DAMON
sysfs interface on the usage document.
Link: https://lkml.kernel.org/r/20250709005952.17776-7-bijan311@gmail.com
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Bijan Tabatabai <bijantabatab@micron.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Ravi Shankar Jonnalagadda <ravis.opensrc@micron.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Document DAMON_STAT usage and add a link to it on DAMON admin-guide page.
Link: https://lkml.kernel.org/r/20250604183127.13968-5-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This section is supposed to be for internal documentation, while the
document is advice for sysadmins. Move it to the appropriate place.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: Harry Yoo <harry.yoo@oracle.com>
Link: https://patch.msgid.link/20250611155916.2579160-2-willy@infradead.org
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
|
|
DAMON was initially developed only for data access monitoring, and then
extended for not only access monitoring but also access-aware system
operations (DAMOS). But the documents have old titles and brief
introductions for only the monitoring part. Update the titles and the
brief introductions to explain DAMOS part together.
Link: https://lkml.kernel.org/r/20250513002715.40126-7-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Brendan Higgins <brendan.higgins@linux.dev>
Cc: David Gow <davidgow@google.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
With KHO in place, let's add documentation that describes what it is and
how to use it.
Link: https://lkml.kernel.org/r/20250509074635.3187114-17-changyuanl@google.com
Signed-off-by: Alexander Graf <graf@amazon.com>
Co-developed-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Co-developed-by: Changyuan Lyu <changyuanl@google.com>
Signed-off-by: Changyuan Lyu <changyuanl@google.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Anthony Yznaga <anthony.yznaga@oracle.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Ashish Kalra <ashish.kalra@amd.com>
Cc: Ben Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Betkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Gowans <jgowans@amazon.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Marc Rutland <mark.rutland@arm.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Pratyush Yadav <ptyadav@amazon.de>
Cc: Rob Herring <robh@kernel.org>
Cc: Saravana Kannan <saravanak@google.com>
Cc: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleinxer <tglx@linutronix.de>
Cc: Thomas Lendacky <thomas.lendacky@amd.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The MGLRU already supports reclaiming only from anonymous memory via the
/sys/kernel/debug/lru_gen interface. Now, memory.reclaim also supports
the swappiness=max parameter to enable reclaiming solely from anonymous
memory. To unify the semantics of proactive reclaiming from anonymous
folios, the max parameter is introduced.
[hezhongkun.hzk@bytedance.com: use strcmp instead of strncmp, if swappiness is not set, use the default value]
Link: https://lkml.kernel.org/r/20250507071057.3184240-1-hezhongkun.hzk@bytedance.com
[akpm@linux-foundation.org: tweak coding style]
Link: https://lkml.kernel.org/r/65181f7745d657d664d833c26d8a94cae40538b9.1745225696.git.hezhongkun.hzk@bytedance.com
Signed-off-by: Zhongkun He <hezhongkun.hzk@bytedance.com>
Acked-by: Muchun Song <muchun.song@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Yosry Ahmed <yosry.ahmed@linux.dev>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Add description of 'nid' file, which is optionally used for specific DAMOS
quota goal metrics such as node_mem_{used,free}_bp on DAMON usage
document.
Link: https://lkml.kernel.org/r/20250420194030.75838-6-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Yunjeong Mun <yunjeong.mun@sk.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "fs/proc: extend the PAGEMAP_SCAN ioctl to report guard
regions", v2.
Introduce the PAGE_IS_GUARD flag in the PAGEMAP_SCAN ioctl to expose
information about guard regions. This allows userspace tools, such as
CRIU, to detect and handle guard regions.
Currently, CRIU utilizes PAGEMAP_SCAN as a more efficient alternative to
parsing /proc/pid/pagemap. Without this change, guard regions are
incorrectly reported as swap-anon regions, leading CRIU to attempt dumping
them and subsequently failing.
The series includes updates to the documentation and selftests to reflect
the new functionality.
This patch (of 3):
Introduce the PAGE_IS_GUARD flag in the PAGEMAP_SCAN ioctl to expose
information about guard regions. This allows userspace tools, such as
CRIU, to detect and handle guard regions.
Link: https://lkml.kernel.org/r/20250324065328.107678-1-avagin@google.com
Link: https://lkml.kernel.org/r/20250324065328.107678-2-avagin@google.com
Signed-off-by: Andrei Vagin <avagin@gmail.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Document {core,ops}_filters directories on usage document.
Link: https://lkml.kernel.org/r/20250305222733.59089-9-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
(CONFIG_NO_PAGE_MAPCOUNT)
Let's implement an alternative when per-page mapcounts in large folios are
no longer maintained -- soon with CONFIG_NO_PAGE_MAPCOUNT.
PM_MMAP_EXCLUSIVE will now be set if folio_likely_mapped_shared() is true
-- when the folio is considered "mapped shared", including when it once
was "mapped shared" but no longer is, as documented.
This might result in and under-indication of "exclusively mapped", which
is considered better than over-indicating it: under-estimating the USS
(Unique Set Size) is better than over-estimating it.
As an alternative, we could simply remove that flag with
CONFIG_NO_PAGE_MAPCOUNT completely, but there might be value to it. So,
let's keep it like that and document the behavior.
Link: https://lkml.kernel.org/r/20250303163014.1128035-18-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Andy Lutomirks^H^Hski <luto@kernel.org>
Cc: Borislav Betkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jann Horn <jannh@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Lance Yang <ioworker0@gmail.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Matthew Wilcow (Oracle) <willy@infradead.org>
Cc: Michal Koutn <mkoutny@suse.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: tejun heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Zefan Li <lizefan.x@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
(CONFIG_NO_PAGE_MAPCOUNT)
Let's implement an alternative when per-page mapcounts in large folios are
no longer maintained -- soon with CONFIG_NO_PAGE_MAPCOUNT.
For large folios, we'll return the per-page average mapcount within the
folio, whereby we round to the closest integer when calculating the
average: however, we'll always return at least 1 if the folio is mapped.
So assuming a folio with 512 pages, the average would be:
* 0 if not pages are mapped
* 1 if there are 1 .. 767 per-page mappings
* 2 if there are 767 .. 1279 per-page mappings
...
For hugetlb folios and for large folios that are fully mapped into all
address spaces, there is no change.
We'll make use of this helper in other context next.
As an alternative, we could simply return 0 for non-hugetlb large folios,
or disable this legacy interface with CONFIG_NO_PAGE_MAPCOUNT.
But the information exposed by this interface can still be valuable, and
frequently we deal with fully-mapped large folios where the average
corresponds to the actual page mapcount. So we'll leave it like this for
now and document the new behavior.
Note: this interface is likely not very relevant for performance. If ever
required, we could try doing a rather expensive rmap walk to collect
precisely how often this folio page is mapped.
Link: https://lkml.kernel.org/r/20250303163014.1128035-17-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Andy Lutomirks^H^Hski <luto@kernel.org>
Cc: Borislav Betkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jann Horn <jannh@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Lance Yang <ioworker0@gmail.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Matthew Wilcow (Oracle) <willy@infradead.org>
Cc: Michal Koutn <mkoutny@suse.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: tejun heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Zefan Li <lizefan.x@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Add a command line option that enables control of how many threads should
be used to allocate huge pages.
[akpm@linux-foundation.org: tidy up a comment]
Link: https://lkml.kernel.org/r/20250227-hugepage-parameter-v2-2-7db8c6dc0453@cyberus-technology.de
Signed-off-by: Thomas Prescher <thomas.prescher@cyberus-technology.de>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Muchun Song <muchun.song@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Document DAMON sysfs interface usage for DAMON sampling and aggregation
intervals auto-tuning.
Link: https://lkml.kernel.org/r/20250303221726.484227-9-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "fs/proc/task_mmu: add guard region bit to pagemap".
Currently there is no means of determining whether a given page in a
mapping range is designated a guard region (as installed via madvise()
using the MADV_GUARD_INSTALL flag).
This is generally not an issue, but in some instances users may wish to
determine whether this is the case.
This series adds this ability via /proc/$pid/pagemap, updates the
documentation and adds a self test to assert that this functions
correctly.
This patch (of 2):
Currently there is no means by which users can determine whether a given
page in memory is in fact a guard region, that is having had the
MADV_GUARD_INSTALL madvise() flag applied to it.
This is intentional, as to provide this information in VMA metadata would
contradict the intent of the feature (providing a means to change fault
behaviour at a page table level rather than a VMA level), and would
require VMA metadata operations to scan page tables, which is
unacceptable.
In many cases, users have no need to reflect and determine what regions
have been designated guard regions, as it is the user who has established
them in the first place.
But in some instances, such as monitoring software, or software that
relies upon being able to ascertain the nature of mappings within a remote
process for instance, it becomes useful to be able to determine which
pages have the guard region marker applied.
This patch makes use of an unused pagemap bit (58) to provide this
information.
This patch updates the documentation at the same time as making the change
such that the implementation of the feature and the documentation of it
are tied together.
Link: https://lkml.kernel.org/r/cover.1740139449.git.lorenzo.stoakes@oracle.com
Link: https://lkml.kernel.org/r/521d99c08b975fb06a1e7201e971cc24d68196d1.1740139449.git.lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Jann Horn <jannh@google.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kalesh Singh <kaleshsingh@google.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Matthew Wilcow (Oracle) <willy@infradead.org>
Cc: "Paul E . McKenney" <paulmck@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Currently, CMA manages one range of physically contiguous memory.
Creation of larger CMA areas with hugetlb_cma may run in to gaps in
physical memory, so that they are not able to allocate that contiguous
physical range from memblock when creating the CMA area.
This can happen, for example, on an AMD system with > 1TB of memory, where
there will be a gap just below the 1TB (40bit DMA) line. If you have set
aside most of memory for potential hugetlb CMA allocation,
cma_declare_contiguous_nid will fail.
hugetlb_cma doesn't need the entire area to be one physically contiguous
range. It just cares about being able to get physically contiguous chunks
of a certain size (e.g. 1G), and it is fine to have the CMA area backed
by multiple physical ranges, as long as it gets 1G contiguous allocations.
Multi-range support is implemented by introducing an array of ranges,
instead of just one big one. Each range has its own bitmap. Effectively,
the allocate and release operations work as before, just per-range. So,
instead of going through one large bitmap, they now go through a number of
smaller ones.
The maximum number of supported ranges is 8, as defined in CMA_MAX_RANGES.
Since some current users of CMA expect a CMA area to just use one
physically contiguous range, only allow for multiple ranges if a new
interface, cma_declare_contiguous_nid_multi, is used. The other
interfaces will work like before, creating only CMA areas with 1 range.
cma_declare_contiguous_nid_multi works as follows, mimicking the
default "bottom-up, above 4G" reservation approach:
0) Try cma_declare_contiguous_nid, which will use only one
region. If this succeeds, return. This makes sure that for
all the cases that currently work, the behavior remains
unchanged even if the caller switches from
cma_declare_contiguous_nid to cma_declare_contiguous_nid_multi.
1) Select the largest free memblock ranges above 4G, with
a maximum number of CMA_MAX_RANGES.
2) If we did not find at most CMA_MAX_RANGES that add
up to the total size requested, return -ENOMEM.
3) Sort the selected ranges by base address.
4) Reserve them bottom-up until we get what we wanted.
Link: https://lkml.kernel.org/r/20250228182928.2645936-3-fvdl@google.com
Signed-off-by: Frank van der Linden <fvdl@google.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Dan Carpenter <dan.carpenter@linaro.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Joao Martins <joao.m.martins@oracle.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Roman Gushchin (Cruise) <roman.gushchin@linux.dev>
Cc: Usama Arif <usamaarif642@gmail.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Yu Zhao <yuzhao@google.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
DAMON sysfs usage doc is describing DAMOS filter type names and their
meanings in short. The design doc is providing the short meaning and
detailed descriptions, too. This is unnecessary duplicates and confuses
where to document new DAMOS filter types and features. Move the details
from usage to design doc.
Link: https://lkml.kernel.org/r/20250218223708.53437-4-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This includes both the 'hugepage_size' filter type and the min/max files
used to decide range of sizes to filter on.
Link: https://lkml.kernel.org/r/20250211124437.278873-5-usamaarif642@gmail.com
Signed-off-by: Usama Arif <usamaarif642@gmail.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
