| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc/IIO driver updates from Greg KH:
"Here is the big set of char/misc/iio and other smaller driver
subsystem changes for 7.0-rc1. Lots of little things in here,
including:
- Loads of iio driver changes and updates and additions
- gpib driver updates
- interconnect driver updates
- i3c driver updates
- hwtracing (coresight and intel) driver updates
- deletion of the obsolete mwave driver
- binder driver updates (rust and c versions)
- mhi driver updates (causing a merge conflict, see below)
- mei driver updates
- fsi driver updates
- eeprom driver updates
- lots of other small char and misc driver updates and cleanups
All of these have been in linux-next for a while, with no reported
issues"
* tag 'char-misc-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (297 commits)
mux: mmio: fix regmap leak on probe failure
rust_binder: return p from rust_binder_transaction_target_node()
drivers: android: binder: Update ARef imports from sync::aref
rust_binder: fix needless borrow in context.rs
iio: magn: mmc5633: Fix Kconfig for combination of I3C as module and driver builtin
iio: sca3000: Fix a resource leak in sca3000_probe()
iio: proximity: rfd77402: Add interrupt handling support
iio: proximity: rfd77402: Document device private data structure
iio: proximity: rfd77402: Use devm-managed mutex initialization
iio: proximity: rfd77402: Use kernel helper for result polling
iio: proximity: rfd77402: Align polling timeout with datasheet
iio: cros_ec: Allow enabling/disabling calibration mode
iio: frequency: ad9523: correct kernel-doc bad line warning
iio: buffer: buffer_impl.h: fix kernel-doc warnings
iio: gyro: itg3200: Fix unchecked return value in read_raw
MAINTAINERS: add entry for ADE9000 driver
iio: accel: sca3000: remove unused last_timestamp field
iio: accel: adxl372: remove unused int2_bitmask field
iio: adc: ad7766: Use iio_trigger_generic_data_rdy_poll()
iio: magnetometer: Remove IRQF_ONESHOT
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"DT core:
- Sync dtc/libfdt with upstream v1.7.2-62-ga26ef6400bd8
- Add a for_each_compatible_node_scoped() loop and convert users in
cpufreq, dmaengine, clk, cdx, powerpc and Arm
- Simplify of/platform.c with scoped loop helpers
- Add fw_devlink tracking for "mmc-pwrseq"
- Optimize fw_devlink callback code size for pinctrl-N properties
- Replace strcmp_suffix() with strends()
DT bindings:
- Support building single binding targets
- Convert google,goldfish-fb, cznic,turris-mox-rwtm, ti,prm-inst
- Add bindings for Freescale AVIC, Realtek RTD1xxx system
controllers, Microchip 25AA010A EEPROM, OnSemi FIN3385, IEI
WT61P803 PUZZLE, Delta Electronics DPS-800-AB power supply,
Infineon IR35221 Digital Multi-phase Controller, Infineon PXE1610
Digital Dual Output 6+1 VR12.5 & VR13 CPU Controller,
socionext,uniphier-smpctrl, and xlnx,zynqmp-firmware
- Lots of trivial binding fixes to address warnings in DTS files.
These are mostly for arm64 platforms which is getting closer to be
warning free. Some public shaming has helped.
- Fix I2C bus node names in examples
- Drop obsolete brcm,vulcan-soc binding
- Drop unreferenced binding headers"
* tag 'devicetree-for-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (60 commits)
dt-bindings: interrupt-controller: Add compatiblie string fsl,imx(1|25|27|31|35)-avic
dt-bindings: soc: imx: add fsl,aips and fsl,emi compatible strings
dt-bindings: display: bridge: lt8912b: Drop reset gpio requirement
dt-bindings: firmware: fsl,scu: Mark multi-channel MU layouts as deprecated
cpufreq: s5pv210: Simplify with scoped for each OF child loop
dmaengine: fsl_raid: Simplify with scoped for each OF child loop
clk: imx: imx31: Simplify with scoped for each OF child loop
clk: imx: imx27: Simplify with scoped for each OF child loop
cdx: Use mutex guard to simplify error handling
cdx: Simplify with scoped for each OF child loop
powerpc/wii: Simplify with scoped for each OF child loop
powerpc/fsp2: Simplify with scoped for each OF child loop
ARM: exynos: Simplify with scoped for each OF child loop
ARM: at91: Simplify with scoped for each OF child loop
of: Add for_each_compatible_node_scoped() helper
dt-bindings: Fix emails with spaces or missing brackets
scripts/dtc: Update to upstream version v1.7.2-62-ga26ef6400bd8
dt-bindings: crypto: inside-secure,safexcel: Mandate only ring IRQs
dt-bindings: crypto: inside-secure,safexcel: Add SoC compatibles
of: reserved_mem: Fix placement of __free() annotation
...
|
|
Pull SoC devicetree updates from Arnd Bergmann:
"There are a handful of new SoCs this time, all of these are more or
less related to chips in a wider family:
- SpacemiT Key Stone K3 is an 8-core risc-v chip, and the first
widely available RVA23 implementation. Note that this is entirely
unrelated with the similarly named Texas Instruments K3 chip family
that follwed the TI Keystone2 SoC.
- The Realtek Kent family of SoCs contains three chip models
rtd1501s, rtd1861b and rtd1920s, and is related to their earlier
Set-top-box and NAS products such as rtd1619, but is built on newer
Arm Cortex-A78 cores.
- The Qualcomm Milos family includes the Snapdragon 7s Gen 3 (SM7635)
mobile phone SoC built around Armv9 Kryo cores of the Arm
Cortex-A720 generation. This one is used in the Fairphone Gen 6
- Qualcomm Kaanapali is a new SoC based around eight high performance
Oryon CPU cores
- NXP i.MX8QP and i.MX952 are both feature reduced versions of chips
we already support, i.e. the i.MX8QM and i.MX952, with fewer CPU
cores and I/O interfaces.
As part of a cleanup, a number of SoC specific devicetree files got
removed because they did not have a single board using the .dtsi files
and they were never compile tested as a result: Samsung s3c6400, ST
spear320s, ST stm32mp21xc/stm32mp23xc/stm32mp25xc, Renesas
r8a779m0/r8a779m2/r8a779m4/r8a779m6/r8a779m7/r8a779m8/r8a779mb/
r9a07g044c1/r9a07g044l1/r9a07g054l1/r9a09g047e37, and TI
am3703/am3715. All of these could be restored easily if a new board
gets merged.
Broadcom/Cavium/Marvell ThunderX2 gets removed along with its only
machine, as all remaining users are assumed to be using ACPI based
firmware.
A relatively small number of 43 boards get added this time, and almost
all of them for arm64. Aside from the reference boards for the newly
added SoCs, this includes:
- Three server boards use 32-bit ASpeed BMCs
- One more reference board for 32-bit Microchip LAN9668
- 64-bit Arm single-board computers based on Amlogic s905y4, CIX
sky1, NXP ls1028a/imx8mn/imx8mp/imx91/imx93/imx95, Qualcomm
qcs6490/qrb2210 and Rockchip rk3568/rk3588s
- Carrier board for SOMs using Intel agilex5, Marvell Armada 7020,
NXP iMX8QP, Mediatek mt8370/mt8390 and rockchip rk3588
- Two mobile phones using Snapdragon 845
- A gaming device and a NAS box, both based on Rockchips rk356x
On top of the newly added boards and SoCs, there is a lot of
background activity going into cleanups, in particular towards getting
a warning-free dtc build, and the usual work on adding support for
more hardware on the previously added machines"
* tag 'soc-dt-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (757 commits)
dt-bindings: intel: Add Agilex eMMC support
arm64: dts: socfpga: agilex: add emmc support
arm64: dts: intel: agilex5: Add simple-bus node on top of dma controller node
ARM: dts: socfpga: fix dtbs_check warning for fpga-region
ARM: dts: socfpga: add #address-cells and #size-cells for sram node
dt-bindings: altera: document syscon as fallback for sys-mgr
arm64: dts: altera: Use lowercase hex
dt-bindings: arm: altera: combine Intel's SoCFPGA into altera.yaml
arm64: dts: socfpga: agilex5: Add IOMMUS property for ethernet nodes
arm64: dts: socfpga: agilex5: add support for modular board
dt-bindings: intel: Add Agilex5 SoCFPGA modular board
arm64: dts: socfpga: agilex5: Add dma-coherent property
arm64: dts: realtek: Add Kent SoC and EVB device trees
dt-bindings: arm: realtek: Add Kent Soc family compatibles
ARM: dts: samsung: Drop s3c6400.dtsi
ARM: dts: nuvoton: Minor whitespace cleanup
MAINTAINERS: Add Falcon DB
arm64: dts: a7k: add COM Express boards
ARM: dts: microchip: Drop usb_a9g20-dab-mmx.dtsi
arm64: dts: rockchip: Fix rk3588 PCIe range mappings
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into soc/dt
SoCFPGA DTS updates for v6.20, version 3
- dt-bindings updates:
- Add intel,socfpga-agilex5-socdk-modular for the Agilex5 mod board
- Add intel,socfpga-agilex-emmc for the Agilex eMMC daughter board
- Move entries in intel,socfpga.yaml into altera.yaml
- Add syscon as a fallback for sys-mgr
- Add dma-cohrerent property for Agilex5 NAND and DMA
- Add support for the Agilex5 modular board
- Add IOMMUS property for ethernet nodes for Agilex5
- Use lowercase hex for dts files
- Add #address-cells and #size-cells for sram
- Fix dtbs_check warning for fpga-region
- Move dma controller node for Agilex5 under simple-bus
- Add support for the Agilex eMMC daughter board
* tag 'socfpga_dts_updates_for_v6.20_v3' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
dt-bindings: intel: Add Agilex eMMC support
arm64: dts: socfpga: agilex: add emmc support
arm64: dts: intel: agilex5: Add simple-bus node on top of dma controller node
ARM: dts: socfpga: fix dtbs_check warning for fpga-region
ARM: dts: socfpga: add #address-cells and #size-cells for sram node
dt-bindings: altera: document syscon as fallback for sys-mgr
arm64: dts: altera: Use lowercase hex
dt-bindings: arm: altera: combine Intel's SoCFPGA into altera.yaml
arm64: dts: socfpga: agilex5: Add IOMMUS property for ethernet nodes
arm64: dts: socfpga: agilex5: add support for modular board
dt-bindings: intel: Add Agilex5 SoCFPGA modular board
arm64: dts: socfpga: agilex5: Add dma-coherent property
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Convert prm-inst binding to DT schema. Use the closest matching standard
node name in the example.
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Link: https://patch.msgid.link/20260120-prm-inst-v2-1-a025873cee27@kemnade.info
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
The Cavium ThunderX2 aka Broadcom Vulcan doesn't use DT, but ACPI, so drop
the SoC binding.
Link: https://patch.msgid.link/20251215213022.3325133-1-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Add missing child nodes for the RaspberryPi firmware. The firmware
implements a power domain provider in a 'power' node. GPIO hog nodes are
also already in use.
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20251215213513.3331128-2-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
The clock and regulator node names were updated to use standard node names,
but the binding wasn't updated.
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://patch.msgid.link/20251215212914.3323741-1-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Allow interrupt-map properties which are already used in the bus node.
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://patch.msgid.link/20251215212932.3324144-1-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Agilex devkit support a separate eMMC daughter card. Document Agilex
eMMC daughter board compatible.
[dinguyen] becauce of patch 1cb8486ac5f3 ("dt-bindings: arm: altera: combine Intel's SoCFPGA into altera.yaml"),
I moved the change to altera.yaml file.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Ng Tze Yee <tzeyee.ng@altera.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
|
|
For all SoCFPGA platforms, whether it has the "intel" or "altr" vendor
prefix are referring to the same business unit that is responsible for
the platform. And now that Altera has spun off to be a separate corporate
entity from Intel, it would make sense to have the device bindings
documentation in the same file.
Move the Intel AgileX board binding documentations into the same file that
contains the Altera ones.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
|
|
Add compatible for Agilex5 SoCFPGA modular board.
Signed-off-by: Niravkumar L Rabara <niravkumarlaxmidas.rabara@altera.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
|
|
Define compatible strings for Realtek RTD1501s, RTD1861b and RTD1920s.
Additionally, convert legacy DTS-style comments to YAML description
properties, following the pattern from the ARM bindings conversion series
[1].
[1] https://lore.kernel.org/lkml/20200622125527.24207-2-afaerber@suse.de/
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Yu-Chun Lin <eleanor.lin@realtek.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20260127071530.25426-2-eleanor15x@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt
New boards: Anberic RG-DS game console, Radxa CM3J module + baseboard
for the Rpi CM4 IO board, QNAP TS133 from the RK3568 NAS series.
2 display outputs for the Lion board (old RK3368), TPS65185 pmic for the
PineNote and fixes for the PCIe ranges on both RK356x and RK3588.
These came quite late, so I wanted to give them the time till 6.20-rc1
and have them migrate to stable-kernels afterwards.
The rest is small stuff on a number of boards wrt gpios and compatibles.
* tag 'v6.20-rockchip-dts64-2' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (25 commits)
arm64: dts: rockchip: Fix rk3588 PCIe range mappings
arm64: dts: rockchip: Fix rk356x PCIe range mappings
arm64: dts: rockchip: Add Anbernic RG-DS
dt-bindings: input: touchscreen: goodix: Add "panel" property
dt-bindings: arm: rockchip: Add Anbernic RG-DS
arm64: dts: rockchip: Explicitly request UFS reset pin on RK3576
arm64: dts: rockchip: Add TPS65185 for PineNote
arm64: dts: rockchip: Do not enable hdmi_sound node on Pinebook Pro
arm64: dts: rockchip: Fix imx258 variant on pinephone pro
arm64: dts: rockchip: Add the Video-Demo overlay for Lion Haikou
arm64: dts: rockchip: Enable pwm1 on rk3368-lion-haikou
arm64: dts: rockchip: Enable HDMI output on RK3368-Lion-Haikou
arm64: dts: rockchip: Add HDMI node to RK3368
arm64: dts: rockchip: Use phandle for i2c_lvds_blc on rk3368-lion haikou
arm64: dts: rockchip: Fix SD card support for RK3576 Nanopi R76s
arm64: dts: rockchip: Fix SD card support for RK3576 EVB1
arm64: dts: rockchip: Add Radxa CM3J on RPi CM4 IO Board
arm64: dts: rockchip: Add Radxa CM3J
dt-bindings: arm: rockchip: Add Radxa CM3J on RPi CM4 IO Board
arm64: dts: rockchip: Make eeprom read-only for Radxa ROCK 3C/5A/5C
...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/cix into soc/dt
- Add OrangePi 6 Plus board
* tag 'cix-dt-binding-v6.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/cix:
dt-bindings: arm: cix: add OrangePi 6 Plus board
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into soc/dt
Microchip AT91 device tree updates for v6.20
This update includes:
- update the SAMA7D65 flexcom nodes to add the missing i2c, spi, and usart
child nodes; the flexcom child nodes were also updated with DMA
properties
- add basic support for the PCB8385 board, based on LAN966X SoC
- drop usb_a9g20-dab-mmx.dtsi as it is not used anywhere in the tree
* tag 'at91-dt-6.20' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: dts: microchip: Drop usb_a9g20-dab-mmx.dtsi
ARM: dts: Add support for pcb8385
dt-bindings: arm: at91: add lan966 pcb8385 board
ARM: dts: microchip: sama7d65: add missing flexcom nodes
ARM: dts: microchip: sama7d65: add fifo-size to usart
ARM: dts: microchip: sama7d65: add dma properties to usart6
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux into soc/dt
MediaTek ARM64 Device Tree updates
This adds support for new boards and variants based on different
already supported MediaTek SoCs, and improves support for current
boards.
In particular:
- New machines:
- Ezurio Tungsten 510 (MediaTek Genio 510 SoC)
- Ezurio Tungsten 700 (MediaTek Genio 700 SoC)
...improvements for already supported SoCs and machines:
- MT7981b gains support for PCI-Express, USB, Ethernet and for
the "GED" WiFi HW offload
- OpenWRT One board gains support for the same
- MT8188/8195/8390/8395 gains support for the DPI1 interface
and HDMI output from the SoC's HDMI Tx controller along with
its HDMI PHY and DDC IPs, usable on a selection of boards
that expose a HDMI connector, namely:
- All MT8390 Genio EVK based boards
- All MT8395 Genio EVK based boards
- Radxa NIO-12L (MT8395)
...and dtbs_check warning fixes for many of the MTK devicetrees,
including MT6795, MT7981, MT7986, MT7988, MT8173, MT8183, MT8186,
MT8188, MT8192, and a dts coding style fix for Airoha EN7581-EVB.
This also includes a fix for the new devicetree overlay warnings,
adding dtbs with applied overlays for all of the devices having
at least one overlay.
* tag 'mtk-dts64-for-v6.20' of https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux: (47 commits)
arm64: dts: mediatek: mt8192: Rename mt8192-afe-pcm to audio-controller
dt-bindings: arm: mediatek: audsys: Support mt8192-audsys variant
arm64: dts: mediatek: mt7988a: Fix PCI-Express T-PHY node address
arm64: dts: mediatek: mt8186-evb: Add vproc fixed regulator
arm64: dts: mediatek: mt7981b-openwrt-one: Add address/size cells to eth
arm64: dts: mediatek: mt8183-kukui: Clean up IT6505 regulator supply
arm64: dts: mediatek: mt7986a: Change compatible for SafeXcel crypto
arm64: dts: mediatek: mt8173-evb: Add interrupts to DA9211 regulator
arm64: dts: mediatek: mt6795-xperia-m5: Rename PMIC leds node
arm64: dts: mediatek: mt6795: Fix issues in SCPSYS node
arm64: dts: mediatek: mt6331: Fix VCAM IO regulator name
arm64: dts: mediatek: mt6795-xperia-m5: Add UHS pins for MMC1 and 2
arm64: dts: mediatek: mt8192-asurada: Remove unused clock-stretch-ns
arm64: dts: mediatek: mt8173-elm: Remove regulators from thermal node
arm64: dts: mediatek: mt8173-elm: Fix dsi0 ports warning
arm64: dts: mediatek: mt8173-elm: Fix bluetooth node name and reorder
arm64: dts: mediatek: mt8183-pumpkin: Fix pinmux node names
arm64: dts: mediatek: mt8183-jacuzzi-pico6: Fix typo in pinmux node
arm64: dts: mediatek: mt7981b-openwrt-one: Remove useless cells from flash@0
arm64: dts: mediatek: mt8183-evb: Fix dtbs_check warnings
...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux into soc/dt
Amlogic ARM64 DT for v6.20:
- Cleanups:
- Use lowercase hex
- Use hyphen in node names
- move CPU OPP table and clock assignment to SoC.dtsi
- drop useless assigned-clock-parents
- MMC clock fixup across multiple families
- Add type-c controller on Radxa Zero 2 and enable NPU
- New board:
- Khadas VIM1s based on Amlogic S4
* tag 'amlogic-arm64-dt-for-v6.20' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux:
arm64: dts: amlogic: meson-s4-s905y4-khadas-vim1s: enable SDIO interface
arm64: dts: amlogic: add the type-c controller on Radxa Zero 2
arm64: dts: amlogic: meson-sm1-odroid: Eliminate Odroid HC4 power glitches during boot.
arm64: dts: amlogic: meson-s4-s905y4-khadas-vim1s: enable eMMC storage
arm64: dts: meson-s4-s905y4-khadas-vim1s: add initial device tree
arm64: dts: meson-s4-aq222: update compatible string with s805x2
dt-bindings: arm: amlogic: introduce specific compatibles for S4 family
arm64: dts: amlogic: Enable the npu node on Radxa Zero 2
arm64: dts: amlogic: g12: assign the MMC A signal clock
arm64: dts: amlogic: g12: assign the MMC B and C signal clocks
arm64: dts: amlogic: gx: assign the MMC signal clocks
arm64: dts: amlogic: axg: assign the MMC signal clocks
arm64: dts: amlogic: a1: align the mmc clock setup
arm64: dts: amlogic: c3: assign the MMC signal clocks
arm64: dts: amlogic: s4: fix mmc clock assignment
arm64: dts: amlogic: s4: assign mmc b clock to 24MHz
arm64: dts: amlogic: drop useless assigned-clock-parents
arm64: dts: amlogic: move CPU OPP table and clock assignment to SoC.dtsi
arm64: dts: amlogic: Use lowercase hex
arm64: dts: amlogic: Use hyphen in node names
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt
i.MX dt-bindgings changes for 6.20:
- New board compatibles for i.MX93 11x11 FRDM, Apalis iMX8QP, i.MX91 FRDM,
ifm VHIP4 EvalBoard v1 and v2, TQ-Systems MBLS1028A/MBLS1028A-IND,
i.MX952 EVK, i.MX8MP FRDM
- Add vendor prefix for ifm electronic gmbh
- A couple of small changes for fsl,imx-gpc.yaml and tcg,tpm-tis-i2c.yaml
* tag 'imx-bindings-6.20' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
dt-bindings: arm: fsl: Add compatible for i.MX95 15x15 FRDM board
dt-bindings: arm: fsl: Document ifm VHIP4 EvalBoard v1 and v2
dt-bindings: vendor-prefixes: Document ifm electronic gmbh
dt-bindings: arm: fsl: Add FRDM-IMX91 board
dt-bindings: tpm: Add st,st33tphf2ei2c
dt-bindings: arm: fsl: Add Apalis iMX8QP
dt-bindings: arm: fsl: add i.MX952 EVK board
dt-bindings: arm: fsl: add i.MX93 11x11 FRDM board
dt-bindings: power: fsl,imx-gpc: Document address-cells
dt-bindings: arm: fsl: Add i.MX8MP FRDM board
dt-bindings: arm: fsl: add TQ-Systems boards MBLS1028A and MBLS1028A-IND
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/dt
dt-bindings: Changes for v6.20-rc1
This series updates various DT bindings for Tegra architecture,
primarily focusing on schema validation fixes and new feature
documentation for Tegra234 and Tegra264 SoCs. Key changes include
converting Tegra20 NAND bindings to YAML, and updating memory, DMA, and
IOMMU definitions for Tegra264 (introducing CMDQV and DBB clock
support). Additionally, it resolves legacy warnings for Tegra30/132
display and VI interfaces.
* tag 'tegra-for-6.20-dt-bindings-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
dt-bindings: display: tegra: document Tegra30 VI and VIP
dt-bindings: display: tegra: document Tegra132 MIPI calibration device
dt-bindings: mtd: nvidia,tegra20-nand: convert to DT schema
dt-bindings: dma: Update ADMA bindings for tegra264
dt-bindings: iommu: Add NVIDIA Tegra CMDQV support
dt-bindings: memory: tegra: Document DBB clock for Tegra264
dt-bindings: tegra: pmc: Update aotag as an optional aperture
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt
Qualcomm Arm64 DeviceTree for v6.20
Introduce the Kaanapali SoC, with the MTP and QRD devices. Introduce
support for the Milos SoC (SM7635) and initial support for the Fairphone
(Gen 6) device on this platform.
Add the QCS6490-based RubikPI3 board, the QRB2210-based Arduino UnoQ,
the X Elite-based Medion SPRCHRGD 14 S1 and Surface Pro 11 laptops, and
the SDM845-based Pixel 3 and Pixel 3 XL devices.
On the Kodiak-based (QCS6490) RB3Gen2 the TC9563 PCIe switch controller
is described.
On Lemans (SA8775P/QCS9075) the GPU and crypto blocks are added.
IO-regions and clocks are added to interconnect nodes to allow QoS
configuration. GPU, TPM and USB support are enabled on the evaluation
kit (EVK).
On Monaco (QCS8300) the two PCIe controllers, the camera subsystem,
tsens, display subsystem, crypto, CPUfreq, and coresight are added. On
the evaluation kit (EVK) the PCIe busses are enabled, together with an
AMC6821-based fan controller and the ST33 TPM chip.
On MSM8939 the camera subsystem is described. The Asus ZenFone 2
Laser/Selfie gains battery and hall sensor support.
On the Agatti-based RB1 board PM8008 is described and an overlay for the
Vision mezzanine is introduced.
On SDM630 the compute DSP remoteproc, FastRPC and related entites are
described. The LPASS LPI pinctrl node is described.
On SDM845-based OnePlus device the bootloader framebuffer and its
resources are described, to improve the transition. On the SDM845-based
devices from OnePlus, SHIFT, and Xiaomi ath10k calibration variants are
specified. The sensor remoteproc is enabled on Xiaomi Pocophone F1.
On SM7225-based Fairphone FP4 regulators for the cameras are described,
and the camera EEPROM is added.
On SM8650 the camera subsystem is described. On the QRD the Samsung
S5KJN1 camera sensor is added, and for the HDK an overlay for the "Rear
Camera Card" is added.
On SM8750 CPUfreq, SDCHCI and Iris (video encode/decode) support are
added, and missing - required - properties for the BAM DMA is added.
These are then enabled on the MTP.
On Talos (SM6150/QCS615) PMU, DisplayPort, and USB/DP combo PHY are added.
DisplayPort is enabled on the Talos Ride board.
On Hamoa (X Elite) add crypto engine, missing TCSR reference clocks, and
random number generator block. The soc bus address width is corrected to
match the hardware. On the Lenovo Thinkpad T14s HDMI and audio playback
over DisplayPort is introduced. HDMI, Iris (video encode/decode) and
PS8830 retimers are described for the ASUS Vivobook S 15. On the Hamoa
evaluation kit (EVK) PCIe busses, WiFi, backlight, TPM and RG
(red/green) LEDs are described.
Enable QSEECOM, and thereby UEFI variable access, on the Medion SPRCHRGD
14 S1 (commit should have been on drivers branch).
* tag 'qcom-arm64-for-6.20' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (155 commits)
dt-bindings: mailbox: qcom: Add IPCC support for Kaanapali and Glymur Platforms
dt-bindings: mailbox: qcom: Add CPUCP mailbox controller bindings for Kaanapali
arm64: dts: qcom: lemans: enable static TPDM
arm64: dts: qcom: kodiak: Add memory region for audiopd
arm64: dts: qcom: x1e78100-lenovo-thinkpad-t14s: add HDMI nodes
arm64: dts: qcom: x1e: bus is 40-bits (fix 64GB models)
arm64: dts: qcom: lemans; Add EL2 overlay
arm64: dts: qcom: sm8150: add uart13
arm64: dts: qcom: sdm845-db845c: specify power for WiFi CH1
arm64: dts: qcom: sdm845-db845c: drop CS from SPIO0
arm64: dts: qcom: qrb4210-rb2: Fix UART3 wakeup IRQ storm
arm64: dts: qcom: sm6125-ginkgo: Fix missing msm-id subtype
arm64: dts: qcom: qcs8300: Add GPU cooling
arm64: dts: qcom: sa8775p: Add reg and clocks for QoS configuration
arm64: dts: qcom: hamoa-iot-evk: Enable TPM (ST33) on SPI11
arm64: dts: qcom: talos: Add PMU support
arm64: dts: qcom: talos: switch to interrupt-cells 4 to add PPI partitions
arm64: dts: qcom: ipq9574: Complete USB DWC3 wrapper interrupts
arm64: dts: qcom: ipq5018: Correct USB DWC3 wrapper interrupts
arm64: dts: qcom: monaco: Add CTCU and ETR nodes
...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/coresight/linux into char-misc-next
Suzuki writes:
coresight: Updates for Linux v6.20/v7.0
This batch of CoreSight hwtracing updates contains :
- Fine grained control of Timestamp generation in ETM4 trace, retaining backward
compatibility
- Feature updates for Qualcomm TPDA driver
- Support Qualcomm Interconnect TNOC
- Miscellaneous fixes to TMC-ETR driver
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
* tag 'coresight-next-v7.0' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/coresight/linux: (27 commits)
coresight: tmc: Decouple the perf buffer allocation from sysfs mode
coresight: tmc-etr: Fix race condition between sysfs and perf mode
coresight: tmc: Add missing doc including reading and etr_mode of struct tmc_drvdata
coresight-tnoc: Add runtime PM support for Interconnect TNOC
coresight-tnoc: add platform driver to support Interconnect TNOC
dt-bindings: arm: qcom: Add Coresight Interconnect TNOC
coresight: etm3x: Fix cpulocked warning on cpuhp
coresight: tpda: Fix intendation for sysfs interface documentation
coresight: tpda: add sysfs node to flush specific port
coresight: tpda: add logic to configure TPDA_SYNCR register
coresight: tpda: add global_flush_req sysfs node
coresight: tpda: add sysfs nodes for tpda cross-trigger configuration
coresight: docs: Document etm4x timestamp interval option
coresight: Extend width of timestamp format attribute
coresight: Prepare to allow setting the timestamp interval
coresight: Remove misleading definitions
coresight: Interpret ETMv4 config with ATTR_CFG_GET_FLD()
coresight: Interpret perf config with ATTR_CFG_GET_FLD()
coresight: Don't reject unrecognized ETMv3 format attributes
coresight: Interpret ETMv3 config with ATTR_CFG_GET_FLD()
...
|
|
Add compatible string for the Anbernic RG-DS.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20260113195721.151205-5-macroalpha82@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bmc/linux into soc/dt
aspeed: second batch of arm devicetree changes for 6.20
New platforms:
- Facebook Anacapa
The Meta Anacapa BMC is the DC-SCM (Data Center Secure Control
Module) controller for the Meta OCP Open Rack Wide (ORW) compute tray.
This platform is a key component of the AMD Helios AI rack reference
design system, designed for next-generation AI workloads.
The BMC utilizes the Aspeed AST2600 SoC to manage the compute tray, which
contains up to 4 AMD Instinct MI450 Series GPUs (connected via a Broadcom
OCP NIC) and host CPUs. Its primary role is to provide essential system
control, power sequencing, and telemetry reporting for the compute complex
via the OpenBMC software stack.
For more detail on the AMD Helios reference design:
https://www.amd.com/en/blogs/2025/amd-helios-ai-rack-built-on-metas-2025-ocp-design.html
- ASRock Rack ALTRAD8
The ALTRAD8 BMC is an Aspeed AST2500-based BMC for the ASRock Rack
ALTRAD8UD-1L2T and ALTRAD8UD2-1L2Q boards.
Significant changes:
- Switch IBM FSI CFAM nodes to use non-deprecated AT25 properties
Updated platforms:
- bletchley (Facebook): USB-C tweaks
* tag 'aspeed-6.20-devicetree-1' of https://git.kernel.org/pub/scm/linux/kernel/git/bmc/linux:
ARM: dts: aspeed: ibm: Use non-deprecated AT25 properties
ARM: dts: aspeed: add device tree for ASRock Rack ALTRAD8 BMC
dt-bindings: arm: aspeed: add ASRock Rack ALTRAD8 board
ARM: dts: aspeed: bletchley: Remove try-power-role from connectors
ARM: dts: aspeed: Add Facebook Anacapa platform
dt-bindings: arm: aspeed: Add compatible for Facebook Anacapa BMC
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt
New boards: Orange Pi CM5 module + Baseboard, Radxa CM5 module + IO-board.
PCIe-slot-overlay for rk3576-evb1
New peripherals: some of the video decoders on rk3576 and rk3588
Enabled peripherals: many RK3588-NPUs and a lot of other peripherals on
a plethora of boards.
* tag 'v6.20-rockchip-dts64-1' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (40 commits)
arm64: dts: rockchip: Add the vdpu383 Video Decoder on rk3576
arm64: dts: rockchip: Add the vdpu381 Video Decoders on RK3588
arm64: dts: rockchip: Add rk3588s-orangepi-cm5-base device tree
dt-bindings: arm: rockchip: Add Orange Pi CM5 Base
arm64: dts: rockchip: Enable second HDMI output on CM3588
arm64: dts: rockchip: Add HDMI to Gameforce Ace
arm64: dts: rockchip: Enable analog sound on RK3576 EVB1
arm64: dts: rockchip: Enable HDMI sound on RK3576 EVB1
arm64: dts: rockchip: Enable HDMI sound on Luckfox Core3576
arm64: dts: rockchip: Enable HDMI sound on FriendlyElec NanoPi M5
arm64: dts: rockchip: Use a readable audio card name on NanoPi M5
arm64: dts: rockchip: enable NPU on rk3588-jaguar
arm64: dts: rockchip: enable NPU on rk3588-tiger
dt-bindings: arm: rockchip: fix description for Radxa CM5
dt-bindings: arm: rockchip: fix description for Radxa CM3I
arm64: dts: rockchip: Add missing everest,es8388 supplies to rk3399-roc-pc-plus
arm64: dts: rockchip: Enable PCIe for ArmSoM Sige1
arm64: dts: rockchip: Enable the NPU on Turing RK1
arm64: dts: rockchip: Enable the NPU on FriendlyElec CM3588
arm64: dts: rockchip: Enable the NPU on NanoPC T6/T6-LTS
...
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
|
|
Add support for the mediatek,mt8192-audsys compatible, which uses
a different audio controller (mt8192-afe-pcm) compared to mt8183
and mt2701.
This resolves a dtbs_check warning on all MT8192 devicetrees.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
Add device tree binding for Qualcomm Coresight Interconnect Trace
Network On Chip (ITNOC). This TNOC acts as a CoreSight
graph link that forwards trace data from a subsystem to the
Aggregator TNOC, without aggregation or ATID functionality.
Signed-off-by: Yuanfang Zhang <yuanfang.zhang@oss.qualcomm.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20251203-itnoc-v5-1-5b97c63f2268@oss.qualcomm.com
|
|
Introduce a new DT compatible string for the NXP i.MX95 15x15 FRDM
development board, a compact and cost-effective platform based on
the i.MX95 applications processor.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
Signed-off-by: Lei Xu <lei.xu@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Document ifm i.MX8MN VHIP4 EvalBoard v1 and v2 reference design binding.
This system exists in two generations, v1 and v2, which share a lot of
commonality. The boards come with either single gigabit ethernet or an
KSZ8794 fast-ethernet switch, boot from eMMC, and offer CAN interfaces
via Microchip MCP25xx SPI CAN controllers, UART, and USB host. The GPU
is not available in the SoC populated on these devices.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Marek Vasut <marex@nabladev.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Not all Tegra SoCs or all versions of a particular Tegra SoC may include
the AOTAG aperture. This change makes "aotag" as an optional aperture for
Tegra234 and Tegra264.
Co-developed-by: Prathamesh Shete <pshete@nvidia.com>
Signed-off-by: Prathamesh Shete <pshete@nvidia.com>
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
The Amlogic S4 SoC family includes multiple variants, such as the S805X2
and S905Y4. Currently, the bindings only define the generic "amlogic,s4"
compatible.
This patch introduces specific compatibles "amlogic,s805x2" and
"amlogic,s905y4" to properly differentiate these SoCs while keeping
"amlogic,s4" as the family fallback.
This allows for more precise hardware description and future-proofing
if SoC-specific quirks arise.
Signed-off-by: Nick Xie <nick@khadas.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260115030015.1334517-2-nick@khadas.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
|
The Radxa CM3J is a feature rich industrial compute module developed
by Radxa, based on the Rockchip RK3568 SoC. [1]
Add devicetree binding documentation for the Radxa CM3J on RPi CM4 IO
Board.
[1] https://dl.radxa.com/cm3j/docs/hw/radxa_cm3j_product_brief_Revision_1.0.pdf
Signed-off-by: FUKAUMI Naoki <naoki@radxa.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20260108113341.14037-1-naoki@radxa.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
QNAP builds a number of variants of the RK356x-based NAS design.
Add the 1-bay TS133 variant.
This one is a tiny bit special as it is based around the RK3566 variant
of the mostly similar RK3566/RK3568 SoCs.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20260104191448.2693309-5-heiko@sntech.de
|
|
OrangePi 6 Plus adopts CIX CD8180/CD8160 SoC, built-in 12-core 64-bit
processor + NPU processor,integrated graphics processor, equipped with
16GB/32GB/64GB LPDDR5, and provides two M.2 KEY-M interfaces 2280 for NVMe
SSD,as well as SPI FLASH and TF slots to meet the needs of fast read/write
and high-capacity storage
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Gary Yang <gary.yang@cixtech.com>
Link: https://lore.kernel.org/r/20260110093406.2700505-2-gary.yang@cixtech.com
Signed-off-by: Peter Chen <peter.chen@cixtech.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC fixes from Arnd Bergmann:
"The main code change is a revert of the Raspberry Pi RP1 overlay
support that was decided to not be ready.
The other fixes are all for devicetree sources:
- ethernet configuration on ixp42x-actiontec-mi424wr is board
revision specific
- validation warning fixes for imx27/imx51/imx6, hikey960 and k3
- Minor corrections across imx8 boards, addressing all types of
issues with interrups, dma, ethernet and clock settings, all simple
one-line changes"
* tag 'soc-fixes-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (25 commits)
arm64: dts: hisilicon: hikey960: Drop "snps,gctl-reset-quirk" and "snps,tx_de_emphasis*" properties
Documentation/process: maintainer-soc: Mark 'make' as commands
Documentation/process: maintainer-soc: Be more explicit about defconfig
arm64: dts: mba8mx: Fix Ethernet PHY IRQ support
arm64: dts: imx8qm-ss-dma: correct the dma channels of lpuart
arm64: dts: imx8mp: Fix LAN8740Ai PHY reference clock on DH electronics i.MX8M Plus DHCOM
arm64: dts: freescale: tx8p-ml81: fix eqos nvmem-cells
arm64: dts: freescale: moduline-display: fix compatible
dt-bindings: arm: fsl: moduline-display: fix compatible
ARM: dts: imx6q-ba16: fix RTC interrupt level
arm64: dts: freescale: imx95-toradex-smarc: fix SMARC_SDIO_WP label position
arm64: dts: freescale: imx95-toradex-smarc: use edge trigger for ethphy1 interrupt
arm64: dts: add off-on-delay-us for usdhc2 regulator
arm64: dts: imx8qm-mek: correct the light sensor interrupt type to low level
ARM: dts: nxp: imx: Fix mc13xxx LED node names
arm64: dts: imx95: correct I3C2 pclk to IMX95_CLK_BUSWAKEUP
MAINTAINERS: Fix a linusw mail address
arm64: dts: broadcom: rp1: drop RP1 overlay
arm64: dts: broadcom: bcm2712: fix RP1 endpoint PCI topology
misc: rp1: drop overlay support
...
|
|
The Orange Pi CM5 Base board is a carrier board for the Orange Pi CM5
compute module. It has 3 ethernet ports, 2 USB ports, one HDMI output
and 4 CSI-2 inputs.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20251027215637.20715-2-laurent.pinchart@ideasonboard.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Add documentation for Microchip LAN9668 PCB8385
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Link: https://lore.kernel.org/r/20251208083545.3642168-2-horatiu.vultur@microchip.com
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
|
|
Add device tree bindings support for the Ezurio Tungsten 510 (MT8370)
SMARC [1] / Ezurio Tungsten 700 (MT8390) SMARC [2] + Universal SMARC
carrier board [3].
[1] https://www.ezurio.com/product/tungsten510-smarc
[2] https://www.ezurio.com/product/tungsten700-smarc
[3] https://www.ezurio.com/system-on-module/accessories/universal-smarc-carrier
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Gary Bisson <bisson.gary@gmail.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
Document ASRock Rack ALTRAD8 (ALTRAD8UD-1L2T and ALTRAD8UD2-1L2Q)
compatibles.
Signed-off-by: Rebecca Cran <rebecca@bsdio.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Tan Siewert <tan.siewert@hetzner.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20251218161816.38155-2-rebecca@bsdio.com
[arj: Drop erroneous Tested-by tag from Tan]
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
|
|
This patch adds the compatible string for the Facebook Anacapa BMC
which uses an Aspeed AST2600 SoC. This is required before adding
the board's device tree source file.
Signed-off-by: Peter Shen <sjg168@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
[arj: Insert provided Acked-by tag from Krzysztof, drop misspelled one]
Link: https://lore.kernel.org/linux-aspeed/259e917f-0570-40d6-983f-bfe9d77444a7@kernel.org/
Link: https://patch.msgid.link/20251219091632.1598603-2-sjg168@gmail.com
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bmc/linux into soc/dt
First batch of ASPEED Arm devicetree changes for 6.20
New platforms:
- NVIDIA MSX4 BMC
The NVIDIA MSX4 HPM (host platform module) is a reference board for
managing up to 8 PCIe connected NVIDIA GPUs via ConnectX-8 (CX8)
SuperNICs. The BMC manages all GPUs and CX8s for both telemetry and
firmware update via MCTP over USB. The host CPUs are dual socket Intel
Granite Rapids processors.
For more detail on this architecture:
https://developer.nvidia.com/blog/nvidia-connectx-8-supernics-advance-ai-platform-architecture-with-pcie-gen6-connectivity/
Updated platforms:
- ast2600-evb (ASPEED): Various tidy-ups to address binding warnings
- bletchley (Meta): Watchdog fix, tidy-ups to address binding warnings
- clemente (Meta): HDD LED fix, GPIO line names, EEPROMs
- harma (Meta): fanboard presence GPIO
- santabarbara (Meta): IPMB, GPIO line names, additional IO expander
* tag 'aspeed-6.20-devicetree-0' of https://git.kernel.org/pub/scm/linux/kernel/git/bmc/linux:
ARM: dts: aspeed: bletchley: Fix ADC vref property names
ARM: dts: aspeed: bletchley: Remove unused i2c13 property
ARM: dts: aspeed: bletchley: Remove unused pca9539 properties
ARM: dts: aspeed: bletchley: Fix SPI GPIO property names
ARM: dts: aspeed: bletchley: Use generic node names
ARM: dts: aspeed: g6: Drop clocks property from arm,armv7-timer
ARM: dts: aspeed: ast2600-evb: Tidy up A0 work-around for UART5
ARM: dts: aspeed: g6: Drop unspecified aspeed,ast2600-udma node
ARM: dts: aspeed: Drop syscon compatible from EDAC in g6 dtsi
ARM: dts: aspeed: Use specified wp-inverted property for AST2600 EVB
ARM: dts: aspeed: Remove sdhci-drive-type property from AST2600 EVB
ARM: dts: aspeed: Add NVIDIA MSX4 HPM
dt-bindings: arm: aspeed: Add NVIDIA MSX4 board
ARM: dts: aspeed: clemente: move hdd_led to its own gpio-leds group
ARM: dts: aspeed: clemente: add gpio line name to io expander
ARM: dts: aspeed: santabarbara: Enable ipmb device for OCP debug card
ARM: dts: aspeed: santabarbara: Add swb IO expander and gpio line names
ARM: dts: aspeed: clemente: Add EEPROMs for boot and data drive FRUs
ARM: dts: aspeed: harma: add fanboard presence sgpio
ARM: dts: aspeed: bletchley: remove WDTRST1 assertion from wdt1
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
"Radxa CM5" is the correct name[1], so fix the description. While at
it, move the CM5 entry after the CM3I.
[1] https://dl.radxa.com/cm5/radxa_cm5_product_brief.pdf
Signed-off-by: FUKAUMI Naoki <naoki@radxa.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20251229045838.2917-2-naoki@radxa.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
"Radxa CM3I" is the correct name[1], so fix the description.
[1] https://dl.radxa.com/cm3i/docs/hw/radxa_cm3i_product_brief.pdf
Signed-off-by: FUKAUMI Naoki <naoki@radxa.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20251229045838.2917-1-naoki@radxa.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Document the Milos-based The Fairphone (Gen. 6) smartphone.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Link: https://lore.kernel.org/r/20251210-sm7635-fp6-initial-v4-4-b05fddd8b45c@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Document Arduino imola, UnoQ codename.
Arduino UnoQ combines Qualcomm Dragonwing™ QRB2210 microprocessor
with STMicroelectronics STM32U585 microcontroller.
Signed-off-by: Riccardo Mereu <r.mereu@arduino.cc>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20251120155825.121483-5-r.mereu.kernel@arduino.cc
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add compatible for the Thundercomm RUBIK Pi 3 board,
which is based on the Qualcomm Dragonwing QCS6490 SoC.
Reviewed-by: Roger Shimizu <rosh@debian.org>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Hongyang Zhao <hongyang.zhao@thundersoft.com>
Link: https://lore.kernel.org/r/20251126-rubikpi-next-20251125-v7-1-e46095b80529@thundersoft.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Document the bindings for the Pixel 3 and 3 XL.
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: David Heidelberg <david@ixit.cz>
Link: https://lore.kernel.org/r/20251214-pixel-3-v7-1-b1c0cf6f224d@ixit.cz
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add the compatibles for the Qualcomm-based Microsoft Surface Pro 11,
using its Denali codename.
The LCD models are using the Qualcomm Snapdragon X1 Plus (X1P64100),
the OLED ones are using the Qualcomm Snapdragon X1 Elite (X1E80100).
Due to the difference in how the built-in panel is being handled
between the OLED variant and LCD one, it is required to have two
separate DTBs, so document the compatible string for both variants.
Signed-off-by: Jérôme de Bretagne <jerome.debretagne@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251220-surface-sp11-for-next-v6-1-81f7451edb77@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add the board FRDM-IMX91 in the binding document.
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Francesco Valla <francesco@valla.it>
Tested-by: Francesco Valla <francesco@valla.it>
Signed-off-by: Joseph Guo <qijian.guo@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add binding documentation for the Apalis iMX8QP SoM mated with Apalis
Ixora and Apalis Evaluation board.
Apalis iMX8QP is a variant of the Apalis iMX8QM, using an NXP i.MX8QP
SoC instead of the i.MX8QM. The two SoCs are pin to pin compatible, with
the i.MX8QP being a lower end variant, with a slower GPU and one Cortex
A72 core instead of two.
The two Apalis SoMs variants share the same schematics and PCB, and the
iMX8QP variant exists only on revision V1.1 of board.
Link: https://www.nxp.com/products/i.MX8
Link: https://www.toradex.com/computer-on-modules/apalis-arm-family/nxp-imx-8
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
