| Age | Commit message (Collapse) | Author |
|---|
|
My name is stamped into maintainership for a big slew of DT
bindings. Now that it is changing, switch it over to my
kernel.org mail address, which will hopefully be stable for the
rest of my life.
Signed-off-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20251216-maintainers-dt-v1-1-0b5ab102c9bb@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
The gate bindings have an artificial split between a "syscon" and clock
provider node. Allow "reg" properties so this split can be removed.
Reviewed-by: Chunyan Zhang <zhang.lyra@gmail.com>
Link: https://patch.msgid.link/20251029155615.1167903-1-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"The technical details below. For me the CIX Semi and Axis
Communications ARTPEC-9 SoCs were the most interesting new drivers in
this merge window.
Core changes:
- Handle per-direction skew control in the generic pin config
- Drop the pointless subsystem boilerplate banner message during
boot. Less noise in the console. It's available as debug message if
someone really want it
New drivers:
- Samsung Exynos 8890 SoC support
- Samsung Exynos derived Axis Communications ARTPEC-9 SoC support.
These guys literally live next door to me, ARTPEC spells out "Axis
Real-Time Picture Encoding Chip" and is tailored for camera image
streams and is something they have evolved for a quarter of a
century
- Mediatek MT6878 SoC support
- Qualcomm Glymur PMIC support (mostly just compatible strings)
- Qualcomm Kaanapali SoC TLMM support
- Microchip pic64gx "gpio2" SoC support
- Microchip Polarfire "iomux0" SoC support
- CIX Semiconductors SKY1 SoC support
- Rockchip RK3506 SoC support
- Airhoa AN7583 chip support
Improvements:
- Improvements for ST Microelectronics STM32 handling of skew
settings so input and output can have different skew settings
- A whole bunch of device tree binding cleanups: Marvell Armada and
Berlin, Actions Semiconductor S700 and S900, Broadcom Northstar 2
(NS2), Bitmain BM1880 and Spreadtrum SC9860 are moved over to
schema"
* tag 'pinctrl-v6.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (107 commits)
pinctrl: add CONFIG_OF dependencies for microchip drivers
pinctrl: starfive: use dynamic GPIO base allocation
pinctrl: single: Fix incorrect type for error return variable
MAINTAINERS: Change Linus Walleij mail address
pinctrl: cix: Fix obscure dependency
dt-bindings: pinctrl: cix,sky1-pinctrl: Drop duplicate newline
dt-bindings: pinctrl: aspeed,ast2600-pinctrl: Add PCIe RC PERST# group
pinctrl: airoha: Fix AIROHA_PINCTRL_CONFS_DRIVE_E2 in an7583_pinctrl_match_data
pinctrl: airoha: fix pinctrl function mismatch issue
pinctrl: cherryview: Convert to use intel_gpio_add_pin_ranges()
pinctrl: intel: Export intel_gpio_add_pin_ranges()
pinctrl: renesas: rzg2l: Refactor OEN register PWPR handling
pinctrl: airoha: convert comma to semicolon
pinctrl: elkhartlake: Switch to INTEL_GPP() macro
pinctrl: cherryview: Switch to INTEL_GPP() macro
pinctrl: emmitsburg: Switch to INTEL_GPP() macro
pinctrl: denverton: Switch to INTEL_GPP() macro
pinctrl: cedarfork: Switch to INTEL_GPP() macro
pinctrl: airoha: add support for Airoha AN7583 PINs
dt-bindings: pinctrl: airoha: Document AN7583 Pin Controller
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"This is entirely SoC clk drivers.
The majority diff wise is for the new Rockchip and Qualcomm clk
drivers which is mostly lines and lines of data structures to describe
the clk hardware in these SoCs. Beyond those two, Renesas continues to
incrementally add clks to their SoC drivers, causing them to show up
higher in the diffstat this time because they added quite a few clks
all over the place.
Overall it is a semi-quiet release that has some new clk drivers and
the usual fixes for clock data that was wrong or missing and
non-critical cleanups that plug error paths or fix typos.
New Drivers:
- Qualcomm IPQ5424 Network Subsystem Clock Controller
- Qualcomm SM8750 Video Clock Controller
- Rockchip RV1126B and RK3506 clock drivers
- i.MX8ULP SIM LPAV clock driver
- Samsung ACPM (firmware interface) clock driver
- Altera Agilex5 clock driver"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (117 commits)
clk: keystone: fix compile testing
clk: keystone: syscon-clk: fix regmap leak on probe failure
clk: qcom: Mark camcc_sm7150_hws static
clk: samsung: exynos-clkout: Assign .num before accessing .hws
clk: rockchip: Add clock and reset driver for RK3506
dt-bindings: clock: rockchip: Add RK3506 clock and reset unit
clk: actions: Fix discarding const qualifier by 'container_of' macro
clk: spacemit: Set clk_hw_onecell_data::num before using flex array
clk: visconti: Add VIIF clocks
dt-bindings: clock: tmpv770x: Add VIIF clocks
dt-bindings: clock: tmpv770x: Remove definition of number of clocks
clk: visconti: Do not define number of clocks in bindings
clk: rockchip: Add clock controller for the RV1126B
dt-bindings: clock, reset: Add support for rv1126b
clk: rockchip: Implement rockchip_clk_register_armclk_multi_pll()
clk: qcom: x1e80100-dispcc: Add USB4 router link resets
dt-bindings: clock: qcom: x1e80100-dispcc: Add USB4 router link resets
clk: qcom: videocc-sm8750: Add video clock controller driver for SM8750
dt-bindings: clock: qcom: Add SM8750 video clock controller
clk: qcom: branch: Extend invert logic for branch2 mem clocks
...
|
|
Pull SoC devicetree updates from Arnd Bergmann:
"Three new SoCs got added in existing arm64 chip families:
- Renesas R-Car X5H (R8A78000) is a new generation of automotive
SoCs, based on 16 Cortex-A720 (Armv9.2) cores, which makes the the
currently highest-perforance embedded SoC.
- TI AM62L is a new variant of the AM62 family of industrial SoCs,
this one comes without a GPU.
- Qualcomm MSM8937 (Snapdragon 430) is an older mobile phone chip
based on Cortex-A53, and closely related to MSM8917 (Snapdragn
425), which we already support.
In addition, there are a good number of newly supported machines
across SoC families:
- Two Aspeed AST2600 (Cortex-A7) based BMC setups for large servers
- Mobile Phones and tables based on Mediatek MT6582, Nvidia Tegra124,
Qualcomm MSM8937 and Qualcomm MSM8939,
- Two Laptops based on Qualcomm SoCs: one using the older sdm850, the
other using x1p42100.
- One Router based on Rockchips RK3568
- 24 variants of the Enclustra Mercury system-on-module, all based on
32-bit Intel/Altera SocFPGA chips, plus two boards using 64-bit
SocFPGA Agilex chips..
- 30 industrial/embedded boards and single-board computers, using
various chips from NXP, Rockchips, Mediatek, TI, Amlogic, Qualcomm,
Spacemit, and Starfive.
In total there are 783 commits here, the majority of these improving
hardware support and cleaning up devicetree files across the tree,
with the majority of the changes going into the Qualcomm, NXP, Renesas
and Rockchips platforms"
* tag 'soc-dt-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (782 commits)
arm64: dts: mediatek: mt8195: Fix address range for JPEG decoder core 1
ARM: dts: samsung: exynos4412-midas: turn off SDIO WLAN chip during system suspend
ARM: dts: samsung: exynos4210-trats: turn off SDIO WLAN chip during system suspend
ARM: dts: samsung: exynos4210-i9100: turn off SDIO WLAN chip during system suspend
ARM: dts: samsung: universal_c210: turn off SDIO WLAN chip during system suspend
arm64: dts: amlogic: meson-g12b: Fix L2 cache reference for S922X CPUs
arm64: dts: Add gpio_intc node for Amlogic S7D SoCs
arm64: dts: Add gpio_intc node for Amlogic S7 SoCs
arm64: dts: Add gpio_intc node for Amlogic S6 SoCs
arm64: dts: amlogic: s7d: add ao secure node
arm64: dts: amlogic: s7: add ao secure node
arm64: dts: amlogic: s6: add ao secure node
arm64: dts: amlogic: Fix the register name of the 'DBI' region
dts: arm64: amlogic: add a5 pinctrl node
arm64: dts: amlogic: s7d: add power domain controller node
arm64: dts: amlogic: s7: add power domain controller node
arm64: dts: amlogic: s6: add power domain controller node
dts: arm64: amlogic: Add ISP related nodes for C3
arm64: dts: meson: add initial device-tree for Tanix TX9 Pro
dt-bindings: arm: amlogic: add support for Tanix TX9 Pro
...
|
|
and 'clk-qcom' into clk-next
* clk-visconti:
clk: visconti: Add VIIF clocks
dt-bindings: clock: tmpv770x: Add VIIF clocks
dt-bindings: clock: tmpv770x: Remove definition of number of clocks
clk: visconti: Do not define number of clocks in bindings
* clk-imx:
clk: imx: add driver for imx8ulp's sim lpav
dt-bindings: clock: document 8ULP's SIM LPAV
clk: imx: imx8mp-audiomix: use devm_auxiliary_device_create() to simple code
clk: imx: Add some delay before deassert the reset
* clk-microchip:
reset: mpfs: add non-auxiliary bus probing
clk: lan966x: remove unused dt-bindings include
clk: microchip: mpfs: use regmap for clocks
dt-bindings: clk: microchip: mpfs: remove first reg region
* clk-rockchip:
clk: rockchip: Add clock and reset driver for RK3506
dt-bindings: clock: rockchip: Add RK3506 clock and reset unit
clk: rockchip: Add clock controller for the RV1126B
dt-bindings: clock, reset: Add support for rv1126b
clk: rockchip: Implement rockchip_clk_register_armclk_multi_pll()
dt-bindings: clock: rk3568: Drop CLK_NR_CLKS define
clk: rockchip: rk3568: Drop CLK_NR_CLKS usage
dt-bindings: clock: rk3568: Add SCMI clock ids
* clk-qcom: (48 commits)
clk: qcom: Mark camcc_sm7150_hws static
clk: qcom: x1e80100-dispcc: Add USB4 router link resets
dt-bindings: clock: qcom: x1e80100-dispcc: Add USB4 router link resets
clk: qcom: videocc-sm8750: Add video clock controller driver for SM8750
dt-bindings: clock: qcom: Add SM8750 video clock controller
clk: qcom: branch: Extend invert logic for branch2 mem clocks
clk: qcom: ecpricc-qdu100: Add mem_enable_mask to the clock memory branch
clk: qcom: clk_mem_branch: add enable mask and invert flags
clk: qcom: mmcc-sdm660: Add missing MDSS reset
dt-bindings: clock: mmcc-sdm660: Add missing MDSS reset
clk: qcom: use different Kconfig prompts for APSS IPQ5424/6018 drivers
clk: qcom: apss-ipq5424: remove unused 'apss_clk' structure
dt-bindings: clock: qcom: Add Kaanapali Global clock controller
dt-bindings: clock: qcom: Document the Kaanapali TCSR Clock Controller
dt-bindings: clock: qcom-rpmhcc: Add RPMHCC for Kaanapali
clk: qcom: tcsrcc-glymur: Update register offsets for clock refs
clk: qcom: gcc-qcs615: Update the SDCC clock to use shared_floor_ops
clk: qcom: camcc-sm7150: Fix PLL config of PLL2
clk: qcom: camcc-sm6350: Fix PLL config of PLL2
clk: qcom: Add NSS clock controller driver for IPQ5424
...
|
|
and 'clk-mediatek' into clk-next
* clk-socfpga:
clk: socfpga: agilex5: add clock driver for Agilex5
* clk-renesas: (35 commits)
clk: renesas: r9a09g077: Add SPI module clocks
clk: renesas: r9a09g056: Add USB3.0 clocks/resets
clk: renesas: r9a09g057: Add USB3.0 clocks/resets
clk: renesas: r9a09g047: Add RSCI clocks/resets
dt-bindings: clock: renesas,r9a09g056-cpg: Add USB3.0 core clocks
dt-bindings: clock: renesas,r9a09g057-cpg: Add USB3.0 core clocks
clk: renesas: r9a06g032: Fix memory leak in error path
clk: renesas: r9a09g077: Use devm_ helpers for divider clock registration
clk: renesas: r9a09g077: Remove stray blank line
clk: renesas: r9a09g077: Propagate rate changes to parent clocks
clk: renesas: r8a779a0: Add 3DGE module clock
clk: renesas: r8a779a0: Add ZG Core clock
clk: renesas: rcar-gen4: Add support for clock dividers in FRQCRB
dt-bindings: clock: r8a779a0: Add ZG core clock
clk: renesas: r9a09g056: Add clock and reset entries for ISP
clk: renesas: r9a09g056: Add support for PLLVDO, CRU clocks, and resets
clk: renesas: r9a09g056: Add clocks and resets for DSI and LCDC modules
clk: renesas: r9a09g077: Add TSU module clock
clk: renesas: r9a09g057: Add clock and reset entries for DSI and LCDC
clk: renesas: rzv2h: Add support for DSI clocks
...
* clk-cleanup:
clk: keystone: fix compile testing
clk: keystone: syscon-clk: fix regmap leak on probe failure
clk: samsung: exynos-clkout: Assign .num before accessing .hws
clk: actions: Fix discarding const qualifier by 'container_of' macro
clk: spacemit: Set clk_hw_onecell_data::num before using flex array
clk: spacemit: fix comment typo
clk: keystone: Fix discarded const qualifiers
clk: sprd: sc9860: Simplify with of_device_get_match_data()
* clk-samsung:
firmware: exynos-acpm: add empty method to allow compile test
MAINTAINERS: add ACPM clock bindings and driver
clk: samsung: add Exynos ACPM clock driver
firmware: exynos-acpm: register ACPM clocks pdev
firmware: exynos-acpm: add DVFS protocol
dt-bindings: firmware: google,gs101-acpm-ipc: add ACPM clocks
clk: samsung: clk-pll: simplify samsung_pll_lock_wait()
clk: samsung: exynosautov920: add block mfc clock support
clk: samsung: exynosautov920: add clock support
dt-bindings: clock: exynosautov920: add mfc clock definitions
dt-bindings: clock: exynosautov920: add m2m clock definitions
dt-bindings: clock: google,gs101-clock: add power-domains
* clk-mediatek:
clk: en7523: Add reset-controller support for EN7523 SoC
dt-bindings: clock: airoha: Add reset support to EN7523 clock binding
|
|
Add device tree bindings for clock and reset unit on RK3506 SoC.
Add clock and reset IDs for RK3506 SoC.
Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com>
Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20251121075350.2564860-2-zhangqing@rock-chips.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Add clock and reset ID defines for rv1126b.
Also add documentation for the rv1126b CRU core.
Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20251111025738.869847-3-zhangqing@rock-chips.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Add compatible string for SM8750 video clock controller and the bindings
for SM8750 Qualcomm SoC.
Signed-off-by: Taniya Das <taniya.das@oss.qualcomm.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20251118-sm8750-videocc-v2-v4-4-049882a70c9f@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Generally at most 1 blank line is the standard style for DT schema
files. Remove the few cases with more than 1 so that the yamllint check
for this can be enabled.
Acked-by: Lee Jones <lee@kernel.org>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> # remoteproc
Acked-by: Georgi Djakov <djakov@kernel.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
Acked-by: Andi Shyti <andi.shyti@kernel.org>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Uwe Kleine-König <ukleinek@kernel.org> # for allwinner,sun4i-a10-pwm.yaml
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> # mtd
Acked-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Acked-by: Manivannan Sadhasivam <mani@kernel.org> # For PCI controller bindings
Link: https://patch.msgid.link/20251023143957.2899600-1-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Update Krzysztof Kozlowski's email address to kernel.org account to stay
reachable.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20251021095354.86455-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
yamllint has gained a new check which checks for inconsistent quoting
(mixed " and ' quotes within a file). Fix all the cases yamllint found
so we can enable the check (once the check is in a release). As single
quotes are (slightly) preferred, use them throughout the modified files
even if double quotes are mostly used.
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Acked-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Acked-by: Jassi Brar <jassisinghbrar@gmail.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Lee Jones <lee@kernel.org>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://patch.msgid.link/20251015232015.846282-1-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Convert the Marvell AP80x System Controller binding to DT schema format.
There's not any specific compatible for the whole block which is a
separate problem, so just the child nodes are documented. Only the
pinctrl and clock child nodes need to be converted as the GPIO node
already has a schema.
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://patch.msgid.link/20251014153040.3783896-1-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Convert the Marvell CP110 System Controller binding to DT schema
format.
There's not any specific compatible for the whole block which is a
separate problem, so just the child nodes are documented. Only the
pinctrl and clock child nodes need to be converted as the GPIO node
already has a schema.
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://patch.msgid.link/20251022165509.3917655-2-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Introduce reset capability to EN7523 device-tree clock binding
documentation.
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Add documentation for i.MX8ULP's SIM LPAV module.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
Link: https://lore.kernel.org/r/20251104120301.913-3-laurentiumihalcea111@gmail.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
|
|
into clk-for-6.19
Merge Kaanapali RPMh, TCSR and global clock controllers through a topic
branch, so they can be made available in the DeviceTree branch as well.
|
|
Add device tree bindings for the global clock controller on Qualcomm
Kaanapali platform.
Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Taniya Das <taniya.das@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251030-gcc_kaanapali-v2-v2-3-a774a587af6f@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add bindings documentation for TCSR Clock Controller for Kaanapali SoC.
Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Taniya Das <taniya.das@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251030-gcc_kaanapali-v2-v2-2-a774a587af6f@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Update the documentation for RPMH clock controller for Kaanapali SoC.
Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Taniya Das <taniya.das@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251030-gcc_kaanapali-v2-v2-1-a774a587af6f@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The first reg region in this binding is not exclusively for clocks, as
evidenced by the dual role of this device as a reset controller at
present. The first region is however better described by a simple-mfd
syscon, but this would have require a significant re-write of the
devicetree for the platform, so the easy way out was chosen when reset
support was first introduced. The region doesn't just contain clock and
reset registers, it also contains pinctrl and interrupt controller
functionality, so drop the region from the clock binding so that it can
be described instead by a simple-mfd syscon rather than propagate this
incorrect description of the hardware to the new pic64gx SoC.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20251029-unwatched-family-e47cb29ea815@spud
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
|
|
into HEAD
Merge IPQ5424 DeviceTree bindings for the Network Subsystem clock
controller from topic branch, to gain access to binding constants.
|
|
into clk-for-6.19
Merge binding changes for IPQ5424 network subsystem clock controllers
through topic branch, to make them available for DeviceTree branch as
well.
|
|
NSS clock controller provides the clocks and resets to the networking
blocks such as PPE (Packet Process Engine) and UNIPHY (PCS) on IPQ5424
devices.
Add support for the compatible string "qcom,ipq5424-nsscc" based on the
existing IPQ9574 NSS clock controller Device Tree binding. Additionally,
update the clock names for PPE and NSS for newer SoC additions like
IPQ5424 to use generic and reusable identifiers "nss" and "ppe" without
the clock rate suffix.
Also add master/slave ids for IPQ5424 networking interfaces, which is
used by nss-ipq5424 driver for providing interconnect services using
icc-clk framework.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Luo Jie <quic_luoj@quicinc.com>
Link: https://lore.kernel.org/r/20251014-qcom_ipq5424_nsscc-v7-7-081f4956be02@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The Networking Subsystem (NSS) clock controller acts as both a clock
provider and an interconnect provider. The #interconnect-cells property
is needed in the Device Tree Source (DTS) to ensure that client drivers
such as the PPE driver can correctly acquire ICC clocks from the NSS ICC
provider.
Add the #interconnect-cells property to the IPQ9574 Device Tree binding
example to complete it.
Fixes: 28300ecedce4 ("dt-bindings: clock: Add ipq9574 NSSCC clock and reset definitions")
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Luo Jie <quic_luoj@quicinc.com>
Link: https://lore.kernel.org/r/20251014-qcom_ipq5424_nsscc-v7-2-081f4956be02@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Some of the USB4 muxes, RCGs and resets were not initially described.
Add indices for them to allow extending the driver.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251003-topic-hamoa_gcc_usb4-v2-1-61d27a14ee65@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Convert the marvell,armada3710-(sb|nb)-pinctrl binding to DT schema
format. The binding includes the "marvell,armada-3700-xtal-clock"
subnode which is simple enough to include here.
Mark interrupt-controller/#interrupt-cells as required as the users have
them and the h/w is either capable of interrupts or not.
As this syscon has 2 register ranges, syscon-common.yaml needs to be
updated to drop the restriction of 1 register entry.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Add device tree clock binding definitions for CMU_MFC
Signed-off-by: Raghav Sharma <raghav.s@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
Add device tree clock binding definitions for CMU_M2M
Signed-off-by: Raghav Sharma <raghav.s@samsung.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
The CMU can be part of a power domain, so we need to allow the relevant
property 'power-domains'.
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"There's a bunch of patches here across drivers/clk/ to migrate drivers
to use struct clk_ops::determine_rate() instead of the round_rate()
one so that we can remove the round_rate clk_op entirely. Brian has
taken up that task which nobody else has wanted to do for close to a
decade. Thanks Brian!
This is all prerequisite work to get to the real task of improving the
clk rate setting process. Once we have determine_rate() used
everywhere, we'll be able to do things like chain the rate request
structs in linked lists to order the rate setting operations or add
more parameters without having to change every clk driver in
existence. It's also nice to not have multiple ways to do something
which just causes confusion for clk driver authors. Overall I'm glad
this is getting done.
Beyond this change we also have a tweak to the clk_lookup() function
in the core framework to use hashing on the clk name instead of a clk
tree walk with string comparisons. We _still_ rely on the clk name to
be unique, because historically we've used globally unique strings to
describe the clk tree topology. This tree walk becomes increasingly
slow as more clks are added to the system. Searching from the roots
for a duplicate is simple but pretty dumb and it wastes boot time so
we're using a hash table as an improvement. Ideally we wouldn't rely
on the strings to be unique at all, relegating them to simply debug
information, but that is future work that will likely require some
sort of Kconfig knob indicating strings aren't used for topology
description.
Outside of the core framework changes we have the usual new SoC
support and fixes to clk drivers for things that were discovered once
the clks were used by consumer drivers. Nothing in particular is
jumping out at me in the "misc" pile, except maybe the Amlogic driver
that has gone through a refactoring. That series got a fix from
testing in -next though so it seems likely that things have been
getting good test coverage for a couple weeks already"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (299 commits)
clk: microchip: core: remove duplicate roclk_determine_rate()
reset: aspeed: register AST2700 reset auxiliary bus device
dt-bindings: clock: ast2700: modify soc0/1 clock define
clk: tegra: do not overallocate memory for bpmp clocks
clk: ep93xx: Use int type to store negative error codes
clk: nxp: Fix pll0 rate check condition in LPC18xx CGU driver
clk: loongson2: Add clock definitions for Loongson-2K0300 SoC
clk: loongson2: Avoid hardcoding firmware name of the reference clock
clk: loongson2: Allow zero divisors for dividers
clk: loongson2: Support scale clocks with an alternative mode
clk: loongson2: Allow specifying clock flags for gate clock
dt-bindings: clock: loongson2: Add Loongson-2K0300 compatible
clk: clocking-wizard: Fix output clock register offset for Versal platforms
clk: xilinx: Optimize divisor search in clk_wzrd_get_divisors_ver()
clk: mmp: pxa1908: Instantiate power driver through auxiliary bus
clk: s2mps11: add support for S2MPG10 PMIC clock
dt-bindings: clock: samsung,s2mps11: add s2mpg10
dt-bindings: stm32: cosmetic fixes for STM32MP25 clock and reset bindings
clk: stm32: introduce clocks for STM32MP21 platform
dt-bindings: stm32: add STM32MP21 clocks and reset bindings
...
|
|
'clk-loongson' into clk-next
- Add Mediatek MT8196 clk drivers
* clk-marvell:
clk: mmp: pxa1908: Instantiate power driver through auxiliary bus
* clk-xilinx:
clk: clocking-wizard: Fix output clock register offset for Versal platforms
clk: xilinx: Optimize divisor search in clk_wzrd_get_divisors_ver()
* clk-mediatek: (31 commits)
clk: mediatek: Add MT8196 vencsys clock support
clk: mediatek: Add MT8196 vdecsys clock support
clk: mediatek: Add MT8196 ovl1 clock support
clk: mediatek: Add MT8196 ovl0 clock support
clk: mediatek: Add MT8196 disp-ao clock support
clk: mediatek: Add MT8196 disp1 clock support
clk: mediatek: Add MT8196 disp0 clock support
clk: mediatek: Add MT8196 mfg clock support
clk: mediatek: Add MT8196 mdpsys clock support
clk: mediatek: Add MT8196 mcu clock support
clk: mediatek: Add MT8196 I2C clock support
clk: mediatek: Add MT8196 pextpsys clock support
clk: mediatek: Add MT8196 ufssys clock support
clk: mediatek: Add MT8196 peripheral clock support
clk: mediatek: Add MT8196 vlpckgen clock support
clk: mediatek: Add MT8196 topckgen2 clock support
clk: mediatek: Add MT8196 topckgen clock support
clk: mediatek: Add MT8196 apmixedsys clock support
dt-bindings: clock: mediatek: Describe MT8196 clock controllers
clk: mediatek: clk-mtk: Add MUX_DIV_GATE macro
...
* clk-loongson:
clk: loongson2: Add clock definitions for Loongson-2K0300 SoC
clk: loongson2: Avoid hardcoding firmware name of the reference clock
clk: loongson2: Allow zero divisors for dividers
clk: loongson2: Support scale clocks with an alternative mode
clk: loongson2: Allow specifying clock flags for gate clock
dt-bindings: clock: loongson2: Add Loongson-2K0300 compatible
|
|
- Speed up clk_core_lookup() by using a hashtable
* clk-microchip:
ARM: at91: remove default values for PMC_PLL_ACR
clk: at91: add ACR in all PLL settings
clk: at91: sam9x7: Add peripheral clock id for pmecc
clk: at91: clk-master: Add check for divide by 3
clk: at91: clk-sam9x60-pll: force write to PLL_UPDT register
ARM: at91: pm: save and restore ACR during PLL disable/enable
* clk-lookup:
clk: Use hashtable for global clk lookups
clk: Sort include statements
* clk-st:
dt-bindings: stm32: cosmetic fixes for STM32MP25 clock and reset bindings
clk: stm32: introduce clocks for STM32MP21 platform
dt-bindings: stm32: add STM32MP21 clocks and reset bindings
|
|
* clk-scmi:
clk: scmi: Add duty cycle ops only when duty cycle is supported
* clk-qcom: (27 commits)
clk: qcom: gcc-sc8280xp: drop obsolete PCIe GDSC comment
clk: qcom: tcsrcc-x1e80100: Set the bi_tcxo as parent to eDP refclk
clk: qcom: dispcc-glymur: Constify 'struct qcom_cc_desc'
clk: qcom: gcc: Add support for Global Clock controller found on MSM8937
dt-bindings: clock: qcom: Add MSM8937 Global Clock Controller
clk: qcom: Select the intended config in QCS_DISPCC_615
clk: qcom: common: Fix NULL vs IS_ERR() check in qcom_cc_icc_register()
clk: qcom: alpha-pll: convert from round_rate() to determine_rate()
clk: qcom: milos: Constify 'struct qcom_cc_desc'
clk: qcom: gcc: Add support for Global Clock Controller
dt-bindings: clock: qcom: document the Glymur Global Clock Controller
clk: qcom: clk-alpha-pll: Add support for Taycan EKO_T PLL
clk: qcom: rpmh: Add support for Glymur rpmh clocks
clk: qcom: Add TCSR clock driver for Glymur SoC
dt-bindings: clock: qcom: Document the Glymur SoC TCSR Clock Controller
dt-bindings: clock: qcom-rpmhcc: Add support for Glymur SoCs
clk: qcom: dispcc-glymur: Add support for Display Clock Controller
dt-bindings: clock: Add DISPCC and reset controller for GLYMUR SoC
clk: qcom: gcc-sdm660: Add missing LPASS/CDSP vote clocks
dt-bindings: clock: gcc-sdm660: Add LPASS/CDSP vote clocks/GDSCs
...
* clk-broadcom:
clk: bcm: rpi: Maximize V3D clock
clk: bcm: rpi: Turn firmware clock on/off when preparing/unpreparing
clk: bcm: rpi: Add missing logs if firmware fails
|
|
* clk-imx:
clk: imx95-blk-ctl: Save/restore registers when RPM routines are called
clk: imx95-blk-ctl: Save platform data in imx95_blk_ctl structure
* clk-allwinner:
clk: sunxi-ng: add support for the A523/T527 MCU CCU
clk: sunxi-ng: div: support power-of-two dividers
clk: sunxi-ng: sun55i-a523-ccu: Add missing NPU module clock
dt-bindings: clock: sun55i-a523-ccu: Add A523 MCU CCU clock controller
dt-bindings: clock: sun55i-a523-ccu: Add missing NPU module clock
clk: sunxi-ng: sun6i-rtc: Add A523 specifics
* clk-ti:
clk: keystone: sci-clk: use devm_kmemdup_array()
clk: ti: am33xx: keep WKUP_DEBUGSS_CLKCTRL enabled
|
|
* clk-samsung:
clk: s2mps11: add support for S2MPG10 PMIC clock
dt-bindings: clock: samsung,s2mps11: add s2mpg10
clk: samsung: exynos990: Add PERIC0 and PERIC1 clock support
dt-bindings: clock: exynos990: Add PERIC0 and PERIC1 clock units
clk: samsung: exynos990: Add missing USB clock registers to HSI0
clk: samsung: exynos990: Add LHS_ACEL gate clock for HSI0 and update CLK_NR_TOP
dt-bindings: clock: exynos990: Add LHS_ACEL clock ID for HSI0 block
clk: samsung: artpec-8: Add initial clock support for ARTPEC-8 SoC
clk: samsung: Add clock PLL support for ARTPEC-8 SoC
dt-bindings: clock: Add ARTPEC-8 clock controller
clk: samsung: exynos990: Add DPU_BUS and CMUREF mux/div and update CLKS_NR_TOP
dt-bindings: clock: exynos990: Extend clocks IDs
clk: samsung: exynos990: Replace bogus divs with fixed-factor clocks
clk: samsung: exynos990: Fix CMU_TOP mux/div bit widths
clk: samsung: exynos990: Use PLL_CON0 for PLL parent muxes
clk: samsung: pll: convert from round_rate() to determine_rate()
clk: samsung: cpu: convert from round_rate() to determine_rate()
clk: samsung: fsd: Add clk id for PCLK and PLL in CAM_CSI block
dt-bindings: clock: Add CAM_CSI clock macro for FSD
* clk-tegra:
clk: tegra: dfll: Add CVB tables for Tegra114
clk: tegra: Add DFLL DVCO reset control for Tegra114
dt-bindings: arm: tegra: Add ASUS TF101G and SL101
dt-bindings: reset: Add Tegra114 CAR header
dt-bindings: arm: tegra: Add Xiaomi Mi Pad (A0101)
dt-bindings: clock: tegra30: Add IDs for CSI pad clocks
dt-bindings: display: tegra: Move avdd-dsi-csi-supply from VI to CSI
dt-bindings: i2c: nvidia,tegra20-i2c: Document Tegra264 I2C
* clk-amlogic:
clk: amlogic: fix recent code refactoring
clk: amlogic: c3-peripherals: use helper for basic composite clocks
clk: amlogic: align s4 and c3 pwm clock descriptions
clk: amlogic: add composite clock helpers
clk: amlogic: use the common pclk definition
clk: amlogic: introduce a common pclk definition
clk: amlogic: pclk explicitly use CLK_IGNORE_UNUSED
clk: amlogic: drop CLK_SET_RATE_PARENT from peripheral clocks
clk: amlogic: move PCLK definition to clkc-utils
clk: amlogic: aoclk: use clkc-utils syscon probe
clk: amlogic: use probe helper in mmio based controllers
clk: amlogic: add probe helper for mmio based controllers
clk: amlogic: drop meson-clkcee
clk: amlogic: naming consistency alignment
|
|
'clk-spacemit' into clk-next
* clk-bindings:
dt-bindings: clock: mediatek: Add power-domains property
dt-bindings: clock: silabs,si5341: Add missing properties
dt-bindings: clock: adi,axi-clkgen: add clock-output-names property
dt-bindings: clock: Remove unused fujitsu,mb86s70-crg11 binding
dt-bindings: clock: Convert silabs,si570 to DT schema
dt-bindings: clock: Convert silabs,si5341 to DT schema
dt-bindings: clock: Convert silabs,si514/544 to DT schema
* clk-cleanup:
clk: tegra: do not overallocate memory for bpmp clocks
clk: ep93xx: Use int type to store negative error codes
dt-bindings: clock: st: flexgen: remove deprecated compatibles
clk: st: flexgen: remove unused compatible
clk: clk-axi-clkgen: remove unneeded semicolon
clk: tegra: Remove redundant semicolons
clk: npcm: select CONFIG_AUXILIARY_BUS
clk: remove unneeded 'fast_io' parameter in regmap_config
* clk-renesas: (27 commits)
clk: renesas: r9a09g05[67]: Reduce differences
clk: renesas: r9a09g047: Add USB3.0 clocks/resets
clk: renesas: cpg-mssr: Fix memory leak in cpg_mssr_reserved_init()
clk: renesas: r9a09g056: Add clock and reset entries for I3C
clk: renesas: r9a09g057: Add clock and reset entries for I3C
dt-bindings: clock: renesas,r9a09g047-cpg: Add USB3.0 core clocks
clk: renesas: r9a09g077: Add Ethernet Subsystem core and module clocks
clk: renesas: rzv2h: Simplify polling condition in __rzv2h_cpg_assert()
clk: renesas: rzv2h: Re-assert reset on deassert timeout
clk: renesas: rzg2l: Re-assert reset on deassert timeout
clk: renesas: rzg2l: Simplify rzg2l_cpg_assert() and rzg2l_cpg_deassert()
dt-bindings: clock: renesas,r9a09g077/87: Add Ethernet clock IDs
clk: renesas: r9a09g047: Add GPT clocks and resets
clk: renesas: r9a09g077: Add module clocks for SCI1-SCI5
clk: renesas: rzv2h: remove round_rate() in favor of determine_rate()
clk: renesas: rzg2l: convert from round_rate() to determine_rate()
clk: renesas: r9a07g04[34]: Use tabs instead of spaces
clk: renesas: r9a07g043: Add MSTOP for RZ/G2UL
clk: renesas: r9a07g044: Add MSTOP for RZ/G2L
clk: renesas: r9a08g045: Add MSTOP for GPIO
...
* clk-thead:
clk: thead: th1520-ap: set all AXI clocks to CLK_IS_CRITICAL
clk: thead: support changing DPU pixel clock rate
clk: thead: add support for enabling/disabling PLLs
clk: thead: Correct parent for DPU pixel clocks
clk: thead: th1520-ap: fix parent of padctrl0 clock
clk: thead: th1520-ap: describe gate clocks with clk_gate
* clk-spacemit:
clk: spacemit: fix i2s clock
clk: spacemit: introduce pre-div for ddn clock
dt-bindings: clock: spacemit: introduce i2s pre-clock to fix i2s clock
clk: spacemit: ccu_pll: convert from round_rate() to determine_rate()
clk: spacemit: ccu_mix: convert from round_rate() to determine_rate()
clk: spacemit: ccu_ddn: convert from round_rate() to determine_rate()
clk: spacemit: fix sspax_clk
dt-bindings: clock: spacemit: CLK_SSPA_I2S_BCLK for SSPA
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull more RISC-V updates from Paul Walmsley:
- Support for the RISC-V-standardized RPMI interface.
RPMI is a platform management communication mechanism between OSes
running on application processors, and a remote platform management
processor. Similar to ARM SCMI, TI SCI, etc. This includes irqchip,
mailbox, and clk changes.
- Support for the RISC-V-standardized MPXY SBI extension.
MPXY is a RISC-V-specific standard implementing a shared memory
mailbox between S-mode operating systems (e.g., Linux) and M-mode
firmware (e.g., OpenSBI). It is part of this PR since one of its use
cases is to enable M-mode firmware to act as a single RPMI client for
all RPMI activity on a core (including S-mode RPMI activity).
Includes a mailbox driver.
- Some ACPI-related updates to enable the use of RPMI and MPXY.
- The addition of Linux-wide memcpy_{from,to}_le32() static inline
functions, for RPMI use.
- An ACPI Kconfig change to enable boot logos on any ACPI-using
architecture (including RISC-V)
- A RISC-V defconfig change to add GPIO keyboard and event device
support, for front panel shutdown or reboot buttons
* tag 'riscv-for-linus-6.18-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (26 commits)
clk: COMMON_CLK_RPMI should depend on RISCV
ACPI: support BGRT table on RISC-V
MAINTAINERS: Add entry for RISC-V RPMI and MPXY drivers
RISC-V: Enable GPIO keyboard and event device in RV64 defconfig
irqchip/riscv-rpmi-sysmsi: Add ACPI support
mailbox/riscv-sbi-mpxy: Add ACPI support
irqchip/irq-riscv-imsic-early: Export imsic_acpi_get_fwnode()
ACPI: RISC-V: Add RPMI System MSI to GSI mapping
ACPI: RISC-V: Add support to update gsi range
ACPI: RISC-V: Create interrupt controller list in sorted order
ACPI: scan: Update honor list for RPMI System MSI
ACPI: Add support for nargs_prop in acpi_fwnode_get_reference_args()
ACPI: property: Refactor acpi_fwnode_get_reference_args() to support nargs_prop
irqchip: Add driver for the RPMI system MSI service group
dt-bindings: Add RPMI system MSI interrupt controller bindings
dt-bindings: Add RPMI system MSI message proxy bindings
clk: Add clock driver for the RISC-V RPMI clock service group
dt-bindings: clock: Add RPMI clock service controller bindings
dt-bindings: clock: Add RPMI clock service message proxy bindings
mailbox: Add RISC-V SBI message proxy (MPXY) based mailbox driver
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC build fix from Arnd Bergmann:
"One commit for the dt bindings was missing from the dt branch, this
one is already pending in the clk tree that contains the corresponding
device driver"
* tag 'soc-fixes-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
dt-bindings: clock: Add ARTPEC-8 clock controller
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"Lots of platform specific updates for Qualcomm SoCs, including a new
TEE subsystem driver for the Qualcomm QTEE firmware interface.
Added support for the Apple A11 SoC in drivers that are shared with
the M1/M2 series, among more updates for those.
Smaller platform specific driver updates for Renesas, ASpeed,
Broadcom, Nvidia, Mediatek, Amlogic, TI, Allwinner, and Freescale
SoCs.
Driver updates in the cache controller, memory controller and reset
controller subsystems.
SCMI firmware updates to add more features and improve robustness.
This includes support for having multiple SCMI providers in a single
system.
TEE subsystem support for protected DMA-bufs, allowing hardware to
access memory areas that managed by the kernel but remain inaccessible
from the CPU in EL1/EL0"
* tag 'soc-drivers-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (139 commits)
soc/fsl/qbman: Use for_each_online_cpu() instead of for_each_cpu()
soc: fsl: qe: Drop legacy-of-mm-gpiochip.h header from GPIO driver
soc: fsl: qe: Change GPIO driver to a proper platform driver
tee: fix register_shm_helper()
pmdomain: apple: Add "apple,t8103-pmgr-pwrstate"
dt-bindings: spmi: Add Apple A11 and T2 compatible
serial: qcom-geni: Load UART qup Firmware from linux side
spi: geni-qcom: Load spi qup Firmware from linux side
i2c: qcom-geni: Load i2c qup Firmware from linux side
soc: qcom: geni-se: Add support to load QUP SE Firmware via Linux subsystem
soc: qcom: geni-se: Cleanup register defines and update copyright
dt-bindings: qcom: se-common: Add QUP Peripheral-specific properties for I2C, SPI, and SERIAL bus
Documentation: tee: Add Qualcomm TEE driver
tee: qcom: enable TEE_IOC_SHM_ALLOC ioctl
tee: qcom: add primordial object
tee: add Qualcomm TEE driver
tee: increase TEE_MAX_ARG_SIZE to 4096
tee: add TEE_IOCTL_PARAM_ATTR_TYPE_OBJREF
tee: add TEE_IOCTL_PARAM_ATTR_TYPE_UBUF
tee: add close_context to TEE driver operation
...
|
|
Pull SoC dt updates from Arnd Bergmann:
"There are five sets of new SoCs that get added in existing families,
all of them being either upgrades or cut-down versions of the older
chips:
- Apple M2 Pro, M2 Max and M2 Ultra, used in the 2022/2023 generation
of high-end workstations and laptops from Apple. Linux has been
working on these for a while but stil requires patches.
- Axis Artpec8 is an Armv8 chip based on Samsung Exynos design,
unlike the earlier Armv7 Artpec6 from the same company that was
part of a separate family of chips.
- NXP i.MX91 is a cut-down version of i.MX93, using only a single
Cortex-A55 core.
- Qualcomm Lemans Auto is a variant of the Lemans SoC that was
originally merged under the sa8775p name, the differences being
mostly the firmware configuration of the platform.
- Four new Renesas SoCs RZ/T2H (r9a09g077m44), RZ/N2H (r9a09g087m44),
RZ/T2H (r9a09g077), and RZ/N2H (r9a09g087) are all industrial
bedded SoCs based on Cortex-A55 cores
In total, there are 65 new machines, including:
- Industrial embedded system and single-board computers based on NXP,
Allwinner, TI, Rockchips, Marvell, Xilinx Spacemit, Starfive chips.
- Reference boards for the newly added Renesas, Qualcomm, NXP and
Axis ARMv8 chips as well as Microchip's MPFS RISC-V SoC
- Laptops and Workstations using Apple M2 and Qualcomm Snapdragon X1
chips.
- Several Samsung phones using Qualcomm Snapdragon chips
- Set-top boxes based on Allwinner H313
- Five BMC boards using 32-bit ASpeed SoCs
- Three network routers using IXP4xx (ARMv5!) and Broadcom bcm4708
(ARMv7) SoCs
Two machines get phased out because they were available only in small
quantities but never made it into products: one STi407 based reference
board, and a Snapdragon 845 based Chromebook.
Aside from the newly added machines, a lot of work went into improving
hardware support on the existing machines and cleaning up contents for
validation"
* tag 'soc-dt-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (931 commits)
arm64: dts: apm-shadowcat: Drop "apm,xgene2-pcie" compatible
arm64: dts: apm-shadowcat: Move slimpro nodes out of "simple-bus" node
ARM: dts: microchip: sam9x7: Add qspi controller
arm64: dts: qcom: Add MST pixel streams for displayport
arm64: dts: qcom: sm6350: correct DP compatibility strings
arm64: dts: qcom: monaco-evk: Enable Adreno 623 GPU
arm64: dts: qcom: qcs8300-ride: Enable Adreno 623 GPU
arm64: dts: qcom: qcs8300: Add gpu and gmu nodes
arm64: dts: allwinner: h313: Add Amediatech X96Q
dt-bindings: arm: sunxi: Add Amediatech X96Q
arm64: dts: apple: t8015: Add SPMI node
arm64: dts: apple: t8012: Add SPMI node
arm64: dts: apple: Add J180d (Mac Pro, M2 Ultra, 2023) device tree
arm64: dts: rockchip: Add devicetree for the ROC-RK3588-RT
dt-bindings: arm: rockchip: Add Firefly ROC-RK3588-RT
arm64: dts: rockchip: update pinctrl names for Radxa E52C
arm64: dts: rockchip: remove vcc_3v3_pmu regulator for Radxa E52C
arm64: dts: apple: Add J474s, J475c and J475d device trees
arm64: dts: apple: Add J414 and J416 Macbook Pro device trees
arm64: dts: apple: Add initial t6020/t6021/t6022 DTs
...
|
|
Add device tree bindings for the RPMI clock service group based
controller for the supervisor software.
The RPMI clock service group is defined by the RISC-V platform
management interface (RPMI) specification.
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Acked-by: Jassi Brar <jassisinghbrar@gmail.com>
Link: https://lore.kernel.org/r/20250818040920.272664-10-apatel@ventanamicro.com
Signed-off-by: Paul Walmsley <pjw@kernel.org>
|
|
Add device tree bindings for the RPMI clock service group based
message proxy implemented by the SBI implementation (machine mode
firmware or hypervisor).
The RPMI clock service group is defined by the RISC-V platform
management interface (RPMI) specification.
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20250818040920.272664-9-apatel@ventanamicro.com
Signed-off-by: Paul Walmsley <pjw@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into soc/dt
Allwinner Device Tree changes for 6.18
This tag contains two DT binding header changes that are shared with
the clk tree.
In this cycle we gained support for the MCU PRCM clock and reset
controller on the A523/A527/T527 family of SoCs, the NPU which is a
Vivante GC9000 IP block, and the NPU clock that was missing. The other
PRCM clock controller gained default bus clock rate settings. These
were not configured in the upstream U-boot bootloader, leading to them
running at slower rates. The assigned rates are from the user manual.
There is also a new board, the NetCube Systems Nagami SoM and two of
its carrier boards.
The A523 family development boards now have their internal RTC clocks
configured correctly, so that the RTC does not drift wildly. The missing
functions for the AXP717 on these boards are added. Missing reset GPIOs
and delays for Ethernet PHYs are added. Last, the Cubie A5E now has its
LEDs described and usable.
An overlay for the Orange Pi Zero interface (addon) board was added.
This can be used with the Orange Pi Zero and Zero Plus 2. Default audio
routing for these two boards (to be used with the addon) were added to
complement the overlay.
* tag 'sunxi-dt-for-6.18' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
arm64: dts: allwinner: sun55i: Complete AXP717A sub-functions
arm64: dts: allwinner: t527: orangepi-4a: hook up external 32k crystal
arm64: dts: allwinner: t527: avaota-a1: hook up external 32k crystal
arm64: dts: allwinner: a527: cubie-a5e: Drop external 32.768 KHz crystal
arm64: dts: sun55i: a523: Assign standard clock rates to PRCM bus clocks
ARM: dts: sunxi: add support for NetCube Systems Nagami Keypad Carrier
ARM: dts: sunxi: add support for NetCube Systems Nagami Basic Carrier
ARM: dts: sunxi: add support for NetCube Systems Nagami SoM
riscv: dts: allwinner: d1s-t113: Add pinctrl's required by NetCube Systems Nagami SoM
dt-bindings: arm: sunxi: Add NetCube Systems Nagami SoM and carrier board bindings
ARM: dts: allwinner: Add Orange Pi Zero Interface Board overlay
ARM: dts: allwinner: orangepi-zero-plus2: Add default audio routing
ARM: dts: allwinner: orangepi-zero: Add default audio routing
arm64: dts: allwinner: a523: Add NPU device node
arm64: dts: allwinner: a523: Add MCU PRCM CCU node
dt-bindings: clock: sun55i-a523-ccu: Add A523 MCU CCU clock controller
dt-bindings: clock: sun55i-a523-ccu: Add missing NPU module clock
arm64: dts: allwinner: t527: avaota-a1: Add ethernet PHY reset setting
arm64: dts: allwinner: a527: cubie-a5e: Add ethernet PHY reset setting
arm64: dts: allwinner: a527: cubie-a5e: Add LEDs
Link: https://lore.kernel.org/r/aMrtuZg8HlR--TAt@wens.tw
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Document the clock controller shipped in Loongson-2K0300 SoC, which
generates various clock signals for SoC peripherals. Differing from
previous generations of SoCs, LS2K0300 requires a 120MHz external clock
input.
Signed-off-by: Yao Zi <ziyao@disroot.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Yanteng Si <siyanteng@cqsoftware.com.cn>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
The Samsung S2MPG10 clock controller is similar to the existing clock
controllers supported by this binding. Register offsets / layout are
slightly different, so it needs its own compatible.
Acked-by: Stephen Boyd <sboyd@kernel.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
- drop minItems from access-controllers
- remove rcc label from example
- fixes typos
- remove double '::' from 'See also::'
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@foss.st.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Adds clock and reset binding entries for STM32MP21 SoC family.
Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@foss.st.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@foss.st.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
st/stih407-clock.dtsi file has been removed in commit 65322c1daf51
("clk: st: flexgen: remove unused compatible"). This file has three
compatibles which are now dangling. Remove them from documentation.
Signed-off-by: Raphael Gallais-Pou <rgallaispou@gmail.com>
Reviewed-by: Brian Masney <bmasney@redhat.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
