| Age | Commit message (Collapse) | Author |
|---|
|
My name is stamped into maintainership for a big slew of DT
bindings. Now that it is changing, switch it over to my
kernel.org mail address, which will hopefully be stable for the
rest of my life.
Signed-off-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20251216-maintainers-dt-v1-1-0b5ab102c9bb@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc/IIO driver updates from Greg KH:
"Here is the big set of char/misc/iio driver updates for 6.19-rc1. Lots
of stuff in here including:
- lots of IIO driver updates, cleanups, and additions
- large interconnect driver changes as they get converted over to a
dynamic system of ids
- coresight driver updates
- mwave driver updates
- binder driver updates and changes
- comedi driver fixes now that the fuzzers are being set loose on
them
- nvmem driver updates
- new uio driver addition
- lots of other small char/misc driver updates, full details in the
shortlog
All of these have been in linux-next for a while now"
* tag 'char-misc-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (304 commits)
char: applicom: fix NULL pointer dereference in ac_ioctl
hangcheck-timer: fix coding style spacing
hangcheck-timer: Replace %Ld with %lld
hangcheck-timer: replace printk(KERN_CRIT) with pr_crit
uio: Add SVA support for PCI devices via uio_pci_generic_sva.c
dt-bindings: slimbus: fix warning from example
intel_th: Fix error handling in intel_th_output_open
misc: rp1: Fix an error handling path in rp1_probe()
char: xillybus: add WQ_UNBOUND to alloc_workqueue users
misc: bh1770glc: use pm_runtime_resume_and_get() in power_state_store
misc: cb710: Fix a NULL vs IS_ERR() check in probe()
mux: mmio: Add suspend and resume support
virt: acrn: split acrn_mmio_dev_res out of acrn_mmiodev
greybus: gb-beagleplay: Fix timeout handling in bootloader functions
greybus: add WQ_PERCPU to alloc_workqueue users
char/mwave: drop typedefs
char/mwave: drop printk wrapper
char/mwave: remove printk tracing
char/mwave: remove unneeded fops
char/mwave: remove MWAVE_FUTZ_WITH_OTHER_DEVICES ifdeffery
...
|
|
Generally at most 1 blank line is the standard style for DT schema
files. Remove the few cases with more than 1 so that the yamllint check
for this can be enabled.
Acked-by: Lee Jones <lee@kernel.org>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> # remoteproc
Acked-by: Georgi Djakov <djakov@kernel.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
Acked-by: Andi Shyti <andi.shyti@kernel.org>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Uwe Kleine-König <ukleinek@kernel.org> # for allwinner,sun4i-a10-pwm.yaml
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> # mtd
Acked-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Acked-by: Manivannan Sadhasivam <mani@kernel.org> # For PCI controller bindings
Link: https://patch.msgid.link/20251023143957.2899600-1-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
yamllint has gained a new check which checks for inconsistent quoting
(mixed " and ' quotes within a file). Fix all the cases yamllint found
so we can enable the check (once the check is in a release). As single
quotes are (slightly) preferred, use them throughout the modified files
even if double quotes are mostly used.
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Acked-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Acked-by: Jassi Brar <jassisinghbrar@gmail.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Lee Jones <lee@kernel.org>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://patch.msgid.link/20251015232015.846282-1-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Include ADXL318 and ADXL319 accelerometers to the documentation.
The ADXL318 is based on the ADXL380, while the ADXL319 is based on the
ADXL382. However, the ADXL318/319 do not support some built-in features
like single tap, double tap and triple tap detection, and also activity
and inactivity detection.
Signed-off-by: Jonathan Santos <Jonathan.Santos@analog.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Add device tree binding documentation for the Analog Devices AD5446
family of Digital-to-Analog Converters and derivative devices from
Texas Instruments. There's both SPI and I2C interfaces and feature
resolutions ranging from 8-bit to 16-bit.
The binding covers 29 derivatives devices including the AD5446 series,
AD5600 series, AD5620/5640/5660 variants with different voltage ranges,
and TI DAC081s101/DAC101s101/DAC121s101 devices.
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The Renesas RZ/N1 ADC controller is the ADC controller available in the
Renesas RZ/N1 SoCs family.
Signed-off-by: Herve Codina (Schneider Electric) <herve.codina@bootlin.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Add the compatible strings "aspeed,ast2700-adc0" and "aspeed,ast2700-adc1"
to the binding for the Aspeed ADC. These new compatibles represent the
ADC instances found on the AST2700 SoC, which are similar to the AST2600
but have their trimming data located at different SCU offset.
Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Irq is optional signal to make sensor work. Not all boards connect this
signals, so remove it from required list.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
add compatible string for mt8189 evb board dts node of auxadc
Signed-off-by: Jack Hsu <jh.hsu@mediatek.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Add bindings for adp810 differential pressure and temperature
sensor. This sensor communicates over I2C with CRC support and
can measure pressure in the range -500 to 500Pa and temperature
in the range -40 to +85 degree celsius.
Signed-off-by: Akhilesh Patil <akhilesh@ee.iitb.ac.in>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The SARADC of the RK3506 is similar to the one found in the RK3528
in terms of number of channels and the other implementation details.
So add a variant compatible for it, that reflects this fact.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Add device tree binding support for the AD4087 14-bit SAR ADC.
Add adi,ad4087 to the compatible enum.
A fallback compatible string to adi,ad4080 is not appropriate as the
AD4087 has different resolution (14-bit vs 20-bit) and LVDS CNV clock
count maximum (1 vs 7), requiring different driver configuration.
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Add device tree binding support for the AD4086 14-bit SAR ADC.
Add adi,ad4086 to the compatible enum.
A fallback compatible string to adi,ad4080 is not appropriate as the
AD4086 has different resolution (14-bit vs 20-bit) and LVDS CNV clock
count maximum (4 vs 7), requiring different driver configuration.
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Add device tree binding support for the AD4083 16-bit SAR ADC.
Add adi,ad4083 to the compatible enum.
A fallback compatible string to adi,ad4080 is not appropriate as the
AD4083 has different resolution (16-bit vs 20-bit) and LVDS CNV clock
count maximum (5 vs 7), requiring different driver configuration.
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Add devicetree binding for Bosch imu smi330.
The smi330 is a combined three axis angular rate and
three axis acceleration sensor module.
Signed-off-by: Jianping Shen <Jianping.Shen@de.bosch.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Add device-tree documentation for MAX14001/MAX14002 ADCs.
The MAX14001/MAX14002 are isolated, single-channel analog-to-digital
converters with programmable voltage comparators and inrush current
control optimized for configurable binary input applications.
They share the same features, but in the MAX14001 the inrush trigger
threshold, current magnitude, and current duration are all programmable,
whereas in the MAX14002 these parameters are fixed.
Co-developed-by: Kim Seer Paller <kimseer.paller@analog.com>
Signed-off-by: Kim Seer Paller <kimseer.paller@analog.com>
Signed-off-by: Marilene Andrade Garcia <marilene.agarcia@gmail.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Marcelo Schmitt <marcelo.schmitt1@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The LED pulse width on the MAX30100 sensor determines how long the
IR/Red LEDs are driven during each sample, directly affecting the
emitted optical energy and hence the received signal amplitude.
This parameter is highly dependent on the mechanical and optical
integration of the sensor, such as:
- The type and thickness of the optical window or lens covering
the sensor.
- The distance between the LED and photodiode.
- The reflectivity of the target surface.
For example:
- A smartwatch or wearable ring with a thin glass window can operate
with shorter pulses (200-400 us) to save power.
- A medical-grade pulse oximeter or sensor mounted behind a thicker
protective layer may require longer pulses (800-1600 us) for
reliable signal amplitude.
Because this configuration is determined by hardware design rather than
by runtime conditions, it is appropriate to describe it in the DT.
If not specified, the driver defaults to 1600 us to maintain
existing behavior.
Tested on: Raspberry Pi 3B + MAX30100 breakout board.
Signed-off-by: Shrikant Raskar <raskar.shree97@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The pinout of all the supported chips in this binding have two interrupt
pins. Document the second one, too, even though the Linux driver
currently does not support the second interrupt. Boards may have it
wired nonetheless. While here, drop the dependency of interrupt-names
which is already described in the core.
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Add device tree binding support for the AD4081 20-bit SAR ADC.
Add adi,ad4081 to the compatible enum.
A fallback compatible string to adi,ad4080 is not appropriate as the
AD4081 has a different LVDS CNV clock count maximum (2 vs 7), requiring
different driver configuration.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Add device tree binding support for the AD4084 16-bit SAR ADC.
Add adi,ad4084 to the compatible enum.
A fallback compatible string to adi,ad4080 is not appropriate as the
AD4084 has different resolution (16-bit vs 20-bit) and LVDS CNV clock
count maximum (2 vs 7), requiring different driver configuration.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Document the ICM-45600 devices devicetree bindings.
Specific variants of the device are defined because of their
differences in terms of FSR or advanced features like eDMP.
Signed-off-by: Remi Buisson <remi.buisson@tdk.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The DPS310 is a barometric pressure and temperature sensor with
an I2C interface. Remove it from trivial-devices.yaml and add its
own documentation to allow for consumers of this device such as
the iio/hwmon bridge.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Document the A/D 12-Bit successive approximation converters found in the
Renesas RZ/T2H (R9A09G077) and RZ/N2H (R9A09G087) SoCs.
RZ/T2H has two ADCs with 4 channels and one with 6.
RZ/N2H has two ADCs with 4 channels and one with 15.
Signed-off-by: Cosmin Tanislav <cosmin-gabriel.tanislav.xa@renesas.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
MPL3115 is an I2C pressure and temperature sensor. It features 2
interrupt lines which can be configured to indicate events such as data
ready or pressure/temperature threshold reached.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Antoni Pokusinski <apokusinski01@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Set the interrupt type to rising edge within the example block in order
to match the new driver.
The entry that got replaced was not in use by the original driver.
Signed-off-by: Petre Rodan <petre.rodan@subdimension.ro>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Assert CPOL for a high-idle clock signal and CPHA for sampling on the
trailing (rising) edge.
Quoting from the datasheet:
"During the transitions on CSB, SCK must be high. SDI and SDO are driven
at the falling edge of SCK and should be captured at the rising edge of
SCK."
The sensor does not function with the default SPI clock mode.
Fixes: 7dbd479425d2 ("dt-bindings:iio:accel:bosch,bma220 device tree binding documentation")
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Petre Rodan <petre.rodan@subdimension.ro>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Cleanup typo present in the title.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Petre Rodan <petre.rodan@subdimension.ro>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The ROHM BD79112 is an ADC/GPIO with 32 channels. The channel inputs can
be used as ADC or GPIO. Using the GPIOs as IRQ sources isn't supported.
The ADC is 12-bit, supporting input voltages up to 5.7V, and separate I/O
voltage supply. Maximum SPI clock rate is 20 MHz (10 MHz with
daisy-chain configuration) and maximum sampling rate is 1MSPS.
Add a device tree binding document for the ROHM BD79112.
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Add devicetree bindings support for ade9000.
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The current-sense-amplifier is an IIO provider thus can be referenced by
IIO consumers (via "io-channels" property in consumer device node). Such
provider is required to describe number of cells used in phandle lookup
with "io-channel-cells" property.
Signed-off-by: Primoz Fiser <primoz.fiser@norik.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250905065503.3022107-1-primoz.fiser@norik.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Document the bindings for Infineon TLV493D Low-Power 3D Magnetic Sensor
controlled by I2C interface. Main applications includes joysticks, control
elements (white goods, multifunction knops), or electric meters (anti-
tampering).
Drop duplicate entry for infineon,tlv493d from trivial-devices.yaml as
its documented in this separate dt-binding file now.
Datasheet: https://www.infineon.com/assets/row/public/documents/24/49/infineon-tlv493d-a1b6-datasheet-en.pdf
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Dixit Parmar <dixitparmar19@gmail.com>
Link: https://patch.msgid.link/20250906-tlv493d-sensor-v6_16-rc5-v6-1-b1a62d968353@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
With last user of touchscreen via ADC (S3C24xx SoC) gone, drop the
unused has-touchscreen property and optional touchscreen interrupt for
samsung,s3c6410-adc. The samsung,s5pv210-adc is the only platform
having two interrupts, so add a constrain for that.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250830-s3c-cleanup-adc-v2-5-4f8299343d32@linaro.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Samsung S3C24xx family of SoCs was removed the Linux kernel in the
commit 61b7f8920b17 ("ARM: s3c: remove all s3c24xx support"), in January
2023. There are no in-kernel users of remaining S3C24xx compatibles.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250830-s3c-cleanup-adc-v2-4-4f8299343d32@linaro.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Add the generic io-backends property to the AD7779 binding to enable
support for the IIO backend framework.
Also add the adi,num-lanes property to set the number of lanes used by
AD7779.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Ioana Risteiu <Ioana.Risteiu@analog.com>
Link: https://patch.msgid.link/20250825221355.6214-3-Ioana.Risteiu@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Use correct clocks properties for the AD7124 family of ADCs.
These ADCs have an internal clock along with an optional external clock
that can be connected to the CLK pin. This pin can be wired up 3 ways:
1. Not connected - the internal clock is used.
2. Connected to an external clock (input) - the external clock is used.
3. Connected to the CLK pin on another ADC (output) - the internal clock
is used on one and the other is configured for an external clock.
The new bindings describe these 3 cases by picking one of the following:
1. Omit both clocks and #clock-cells properties.
2. Include only the clocks property with a phandle to the external clock.
3. Include only the #clock-cells property on the ADC providing the output.
The clock-names property is now deprecated and should not be used. The
MCLK signal that it refers to is an internal counter in the ADC and
therefore does not make sense as a devicetree property as it can't be
connected to anything external to the ADC. Since there is only one
possible external clock, the clock-names property is not needed anyway.
Based on the implementation of the Linux driver, it looks like the
"mclk" clock was basically being used as a control to select the power
mode of the ADC, which is not something that should be done in the
devicetree.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20250828-iio-adc-ad7124-proper-clock-support-v3-1-0b317b4605e5@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The DTS code coding style expects exactly one space around '='
character.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20250821083150.46554-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Add #io-channel-cells property with a constant value of 1 because it is
multi-channel ADC.
Fix below CHECK_DTBS warnings:
arch/arm/boot/dts/nxp/ls/ls1021a-iot.dtb: adc@35 (maxim,max1239): '#io-channel-cells' does not match any of the regexes: '^pinctrl-[0-9]+$'
from schema $id: http://devicetree.org/schemas/iio/adc/maxim,max1238.yaml#
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20250818200014.3700738-1-Frank.Li@nxp.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Add microchip,mcp9601 compatible in addition to the original
microchip,mcp9600 to designate support between these two chips.
The current dt-binding has open-circuit and short-circuit as interrupt
names, but these are only supported in mcp9601.
The OC and SC detection requires that mcp9601 VSENSE be wired up, which
not only enables the OC SC interrupts, but also the OC and SC status
register bits.
Add a microchip,vsense boolean to show the chip is wired for this
support.
Add constraints so this feature only applies if the mcp9601 compatible
is selected.
Signed-off-by: Ben Collins <bcollins@watter.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20250822-upstream-changes-v8-2-40bb1739e3e2@watter.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
As is already documented in this file, Type-K is the default, so make
that explicit in the dt-bindings.
Signed-off-by: Ben Collins <bcollins@watter.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20250822-upstream-changes-v8-1-40bb1739e3e2@watter.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Anand left AMD/Xilinx some time ago. Salih and Connall are new
maintainers of xilinx-ams driver.
Signed-off-by: Salih Erim <salih.erim@amd.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Acked-by: Michal Simek <michal.simek@amd.com>
Acked-by: O'Griofa, Conall <conall.ogriofa@amd.com>
Link: https://patch.msgid.link/20250820100519.2272509-1-salih.erim@amd.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The ROHM BD79100, BD79101, BD79102, BD79103 are very similar ADCs as the
ROHM BD79104. The BD79100 has only 1 channel. BD79101 has 2 channels and
the BD79102 has 4 channels. Both BD79103 and BD79104 have 4 channels,
and, based on the data sheets, they seem identical from the software
point-of-view.
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/0874c5933cf56430b9440d19ff46f746e4897952.1755504346.git.mazziesaccount@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Emails to stefan.popa@analog.com and alexandru.tachici@analog.com bounce
permanently:
Remote Server returned '550 5.1.10 RESOLVER.ADR.RecipientNotFound; Recipient not found by SMTP address lookup'
so replace them with Marcelo Schmitt and Nuno Sá (listed alphabetically
by first name) from Analog where appropriate.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Nuno Sá <nuno.sa@analog.com>
Acked-by: Marcelo Schmitt <marcelo.schmitt@analog.com>
Link: https://patch.msgid.link/20250812132445.75398-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The ROHM BD79105 is a simple, 16-bit, 1-channel ADC with a 'CONVSTART'
pin used to start the ADC conversion. Other than the 'CONVSTART', there
are 3 supply pins (one used as a reference), analog inputs, ground and
communication pins. It's worth noting that the pin somewhat confusingly
labeled as 'DIN', is a pin which should be used as a chip-select. The IC
does not have any writable registers.
The device is designed so that the output pin can, in addition to
outputting the data, be used as a 'data-ready'-IRQ. There are cases
where the IRQ can't be used (because it is delivered via SPI data-line).
Hence, some systems may use a GPIO for polling the data readiness.
Add a compatible for the bd79105 and add the data-ready GPIO to the
binding.
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/3f70f68665225be3091f8a0412e74037b6a2a88e.1754901948.git.mazziesaccount@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The ad7476 supports a few variants with different power-supplies and
control GPIOs. The binding first unconditionally introduces all the
properties, and later sets them 'true' or 'false' based on the
combatible.
The 'true' seems to be implied by the initial property introduction so
the 'true' -branches in later conditional handling (based on the
compatible) can be omitted.
Drop the redundant true -branches.
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/bee66444bf628ba9a34a02738a1842e2abc14290.1754901948.git.mazziesaccount@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Add a new compatible for Vishay high accuracy RGBIR color sensor
veml6046x00.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Andreas Klinger <ak@it-klinger.de>
Link: https://patch.msgid.link/20250728075447.338725-2-ak@it-klinger.de
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
There is no txt file for it, add yaml for invensense,icp10100
which is already used in the driver. Also, document other compatibles
for ICP-101xx family and add invensense,icp10100 as a fallback.
Acked-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
Signed-off-by: Rodrigo Gobbi <rodrigo.gobbi.7@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250801221424.132305-1-rodrigo.gobbi.7@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
dynaimage,al3010 and dynaimage,al3320a are I2C devices, so their
interrupts are not routed to GIC and rarely first interrupt cell is <0>.
This looks like copy-paste from some SoC block, so drop it and also for
readability use known defines instead of hard-coding interrupt flag.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: David Heidelberg <david@ixit.cz>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20250724111345.47889-8-krzysztof.kozlowski@linaro.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The interrupt line to GIC is IRQ_TYPE_LEVEL_HIGH, so use that instead of
"none". Also replace the hard-coded GIC_SPI flag.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20250724111345.47889-7-krzysztof.kozlowski@linaro.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
For readability use known defines instead of hard-coding GPIO or
interrupt flag.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Acked-by: Matti Vaittinen <mazziesaccount@gmail.com>
Link: https://patch.msgid.link/20250724111345.47889-6-krzysztof.kozlowski@linaro.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
