| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux
Pull remoteproc updates from Bjorn Andersson:
- Fix a memory remapping issue and make a few life-cycle improvements
in the i.MX HiFi remoteproc driver
- Add support the System Manager CPU and LMM APIs and use this to
support i.MX95
- Rework the handling of the Mediatek SCP clock to avoid a potential
circular deadlock in the clock providers
- Refactor the Qualcomm secure-world helpers and add support in the
Qualcomm PAS remoteproc driver for reading a resource-table from
secure world. Use this to configure the IOMMU on newer targets where
Linux runs in EL2
* tag 'rproc-v7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux:
remoteproc: imx_rproc: Fix invalid loaded resource table detection
remoteproc: mediatek: Break lock dependency to `prepare_lock`
remoteproc: imx_rproc: Add support for i.MX95
remoteproc: imx_rproc: Add support for System Manager CPU API
remoteproc: imx_rproc: Add support for System Manager LMM API
remoteproc: imx_rproc: Introduce prepare ops for imx_rproc_dcfg
remoteproc: imx_rproc: Add runtime ops copy to support dynamic behavior
dt-bindings: remoteproc: fsl,imx-rproc: Add support for i.MX95
dt-bindings: remoteproc: Add HSM M4F core on TI K3 SoCs
remoteproc: xlnx_r5: Simplify with scoped for each OF child loop
remoteproc: mtk_scp: Simplify with scoped for each OF child loop
remoteproc: imx_dsp_rproc: Only reset carveout memory at RPROC_OFFLINE state
dt-bindings: remoteproc: qcom,sm8550-pas: Drop SM8750 ADSP from if-branch
dt-bindings: remoteproc: qcom,adsp: Allow cx-supply on qcom,sdm845-slpi-pas
remoteproc: imx_dsp_rproc: Fix multiple start/stop operations
remoteproc: imx_rproc: Use strstarts for "rsc-table" check
remoteproc: imx_dsp_rproc: Wait for suspend ACK only if WAIT_FW_CONFIRMATION is set
remoteproc: imx_dsp_rproc: Rename macro to reflect multiple contexts
remoteproc: imx_dsp_rproc: Skip RP_MBOX_SUSPEND_SYSTEM when mailbox TX channel is uninitialized
dt-bindings: remoteproc: Fix dead link to Keystone DSP GPIO binding
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"DT core:
- Sync dtc/libfdt with upstream v1.7.2-62-ga26ef6400bd8
- Add a for_each_compatible_node_scoped() loop and convert users in
cpufreq, dmaengine, clk, cdx, powerpc and Arm
- Simplify of/platform.c with scoped loop helpers
- Add fw_devlink tracking for "mmc-pwrseq"
- Optimize fw_devlink callback code size for pinctrl-N properties
- Replace strcmp_suffix() with strends()
DT bindings:
- Support building single binding targets
- Convert google,goldfish-fb, cznic,turris-mox-rwtm, ti,prm-inst
- Add bindings for Freescale AVIC, Realtek RTD1xxx system
controllers, Microchip 25AA010A EEPROM, OnSemi FIN3385, IEI
WT61P803 PUZZLE, Delta Electronics DPS-800-AB power supply,
Infineon IR35221 Digital Multi-phase Controller, Infineon PXE1610
Digital Dual Output 6+1 VR12.5 & VR13 CPU Controller,
socionext,uniphier-smpctrl, and xlnx,zynqmp-firmware
- Lots of trivial binding fixes to address warnings in DTS files.
These are mostly for arm64 platforms which is getting closer to be
warning free. Some public shaming has helped.
- Fix I2C bus node names in examples
- Drop obsolete brcm,vulcan-soc binding
- Drop unreferenced binding headers"
* tag 'devicetree-for-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (60 commits)
dt-bindings: interrupt-controller: Add compatiblie string fsl,imx(1|25|27|31|35)-avic
dt-bindings: soc: imx: add fsl,aips and fsl,emi compatible strings
dt-bindings: display: bridge: lt8912b: Drop reset gpio requirement
dt-bindings: firmware: fsl,scu: Mark multi-channel MU layouts as deprecated
cpufreq: s5pv210: Simplify with scoped for each OF child loop
dmaengine: fsl_raid: Simplify with scoped for each OF child loop
clk: imx: imx31: Simplify with scoped for each OF child loop
clk: imx: imx27: Simplify with scoped for each OF child loop
cdx: Use mutex guard to simplify error handling
cdx: Simplify with scoped for each OF child loop
powerpc/wii: Simplify with scoped for each OF child loop
powerpc/fsp2: Simplify with scoped for each OF child loop
ARM: exynos: Simplify with scoped for each OF child loop
ARM: at91: Simplify with scoped for each OF child loop
of: Add for_each_compatible_node_scoped() helper
dt-bindings: Fix emails with spaces or missing brackets
scripts/dtc: Update to upstream version v1.7.2-62-ga26ef6400bd8
dt-bindings: crypto: inside-secure,safexcel: Mandate only ring IRQs
dt-bindings: crypto: inside-secure,safexcel: Add SoC compatibles
of: reserved_mem: Fix placement of __free() annotation
...
|
|
Emails to Tinghan Shen bounce permanently with "550 Relaying mail to
tinghan.shen@mediatek.com is not allowed (in reply to RCPT TO command)",
so switch to AngeloGioacchino Del Regno - Mediatek SoC platform
maintainer.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Acked-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://patch.msgid.link/20260116172915.99811-2-krzysztof.kozlowski@oss.qualcomm.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into rproc-next
Merge the support for loading and managing TustZone-based remote
processors found in the Qualcomm Glymur platform from a shared topic
branch, as it's a mix of qcom-soc and remoteproc patches.
|
|
On most Qualcomm platforms, the Qualcomm Hypervisor Execution
Environment (QHEE) is either used as a standalone hypervisor or
co-exists as a module with the Gunyah hypervisor. When QHEE is
present, it configures firmware streams for remote processors.
If QHEE is not available, the operating system must perform
these configurations instead and for that remote processor
firmware stream should be presented to the operating system.
To support this, add the iommus property as an optional property
for PAS-supported devices.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260105-kvmrprocv10-v10-1-022e96815380@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add compatible string for the Cortex-M7 core in i.MX95
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20260109-imx95-rproc-2026-1-8-v6-1-d2fefb36263d@nxp.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
|
|
Some of the TI K3 family of SoCs have a HSM (High Security Module) M4F
core in the Wakeup Voltage Domain which could be used to run secure
services like Authentication. Add the device tree bindings document for
this HSM M4F core.
The added example illustrates the DT node for the HSM core present on K3
J722S SoC.
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260106104755.948086-2-b-padhi@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
|
|
The binding for SM8750 ADSP PAS uses SM8550 ADSP as fallback, thus
"if:then:" block with "contains:" and the fallback does not need to
mention qcom,sm8750-adsp-pas.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251223130533.58468-2-krzysztof.kozlowski@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
One SDM845 board uses cx-supply, which is not allowed by the bindings,
as reported by dtbs_check:
sdm845-samsung-starqltechn.dtb: remoteproc@5c00000 (qcom,sdm845-slpi-pas): Unevaluated properties are not allowed ('cx-supply' was unexpected)
The SDM845 SLPI binding already allows lcx and lmx domains, thus the
cx-supply seems like a fake name for something else, e.g. some
enable pin. The qcom_q6v5_pas.c driver parses cx-supply, so it is an
established ABI, therefore document it for this device only.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251229152658.284199-2-krzysztof.kozlowski@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The old text binding 'gpio-dsp-keystone.txt' was replaced by a DT schema in
commit aff0a1701b020c8e6b172f28828fd4f3e6eed41a
("dt-bindings: gpio: Convert ti,keystone-dsp-gpio to DT schema").
Update the reference to point to the new file.
Signed-off-by: Soham Metha <sohammetha01@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251203180337.50831-1-sohammetha01@gmail.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux
Pull remoteproc updates from Bjorn Andersson:
- Add support for the compute DSP in the Qualcomm SDM660 platform, and
finally fix up the way MSM8974 audio DSP remoteproc driver manages
its power rails
- Replace the usage of of_reserved_mem_lookup() with
of_reserved_mem_region_to_resource() to clean things up across most
of the drivers
- Perform a variety of housekeeping and cleanup work across iMX,
Mediatek, and TI remoteproc drivers
* tag 'rproc-v6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux: (45 commits)
remoteproc: qcom_q6v5_wcss: use optional reset for wcss_q6_bcr_reset
remoteproc: qcom_q6v5_wcss: fix parsing of qcom,halt-regs
remoteproc: qcom_wcnss: Fix NULL vs IS_ERR() bug in wcnss_alloc_memory_region()
remoteproc: qcom: q6v5: Fix NULL vs IS_ERR() bug in q6v5_alloc_memory_region()
remoteproc: qcom: pas: Fix a couple NULL vs IS_ERR() bugs
remoteproc: qcom_q6v5_adsp: Fix a NULL vs IS_ERR() check in adsp_alloc_memory_region()
remoteproc: imx_dsp_rproc: Fix NULL vs IS_ERR() bug in imx_dsp_rproc_add_carveout()
remoteproc: st: Fix indexing of memory-regions
remoteproc: qcom: pas: Add support for SDM660 CDSP
dt-bindings: remoteproc: qcom: adsp: Add SDM660 CDSP compatible
dt-bindings: remoteproc: qcom: adsp: Add missing constrains for SDM660 ADSP
dt-bindings: remoteproc: qcom,sc8280xp-pas: Fix CDSP power desc
remoteproc: omap: Remove redundant pm_runtime_mark_last_busy() calls
remoteproc: qcom: Use of_reserved_mem_region_* functions for "memory-region"
remoteproc: qcom_q6v5_pas: Use resource with CX PD for MSM8974
dt-bindings: remoteproc: qcom,adsp: Make msm8974 use CX as power domain
remoteproc: Use of_reserved_mem_region_* functions for "memory-region"
remoteproc: imx_dsp_rproc: Simplify start/stop error handling
remoteproc: imx_rproc: Remove enum imx_rproc_method
remoteproc: imx_dsp_rproc: Simplify IMX_RPROC_RESET_CONTROLLER switch case
...
|
|
Add compatible for the compute DSP remoteproc found in SDM660.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Nickolay Goppen <setotau@mainlining.org>
Link: https://lore.kernel.org/r/20251110-qcom-sdm660-cdsp-v3-2-cc3c37287e72@mainlining.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Since SDM660 ADSP node uses "xo" clock, interrupts and "cx" power domain
properties add corresponding constrains for SDM660 ADSP.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Nickolay Goppen <setotau@mainlining.org>
Link: https://lore.kernel.org/r/20251110-qcom-sdm660-cdsp-v3-1-cc3c37287e72@mainlining.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The power requirements for the CDSP instances on SC8280XP aren't fully
described, with only one of the three present. Fix that.
Fixes: ee651cd1e944 ("dt-bindings: remoteproc: qcom: pas: Add sc8280xp adsp and nsp pair")
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20251104-topic-8280_mxc-v1-2-df545af0ef94@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Using CX as a regulator is an artifact of earlier times. Instead use CX
power rail as power domain from rpmpd.
Signed-off-by: Luca Weiss <luca@lucaweiss.eu>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250621-msm8974-rpmpd-switch-v1-1-0a2cb303c446@lucaweiss.eu
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Generally at most 1 blank line is the standard style for DT schema
files. Remove the few cases with more than 1 so that the yamllint check
for this can be enabled.
Acked-by: Lee Jones <lee@kernel.org>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> # remoteproc
Acked-by: Georgi Djakov <djakov@kernel.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
Acked-by: Andi Shyti <andi.shyti@kernel.org>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Uwe Kleine-König <ukleinek@kernel.org> # for allwinner,sun4i-a10-pwm.yaml
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> # mtd
Acked-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Acked-by: Manivannan Sadhasivam <mani@kernel.org> # For PCI controller bindings
Link: https://patch.msgid.link/20251023143957.2899600-1-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux
Pull remoteproc updates from Bjorn Andersson:
- Enable coredump support for the i.MX HiFi core remoteproc, and clean
up the i.MX remoteproc driver.
- Introduce remoteprocs on the Qualcomm Milos platform. Gracefully shut
own the ADSP remoteproc when bootloader has loaded the "Lite"
firmware on X Elite. Improve the resource handover procedure to avoid
possibly duplicate handling.
- Transition the TI DA8xx, TI Keystone, and TI Wakeup M3 remoteproc
drivers to handle resources using devres.
* tag 'rproc-v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux: (29 commits)
remoteproc: pru: Fix potential NULL pointer dereference in pru_rproc_set_ctable()
remoteproc: qcom: pas: Drop redundant assignment to ret
remoteproc: qcom: pas: Shutdown lite ADSP DTB on X1E
remoteproc: qcom: q6v5: Avoid handling handover twice
remoteproc: qcom: q6v5: Avoid disabling handover IRQ twice
remoteproc: qcom: pas: Add Milos remoteproc support
dt-bindings: remoteproc: qcom,milos-pas: Document remoteprocs
remoteproc: qcom_q6v5_mss: support loading MBN file on msm8974
remoteproc: imx_rproc: Clean up after ops introduction
remoteproc: imx_rproc: Simplify IMX_RPROC_SMC switch case
remoteproc: imx_rproc: Simplify IMX_RPROC_SCU_API switch case
remoteproc: imx_rproc: Simplify IMX_RPROC_MMIO switch case
remoteproc: imx_rproc: Move imx_rproc_dcfg closer to imx_rproc_of_match
remoteproc: imx_rproc: Introduce start/stop/detect_mode ops for imx_rproc_dcfg
remoteproc: k3: Correctly release some resources allocated in k3_rproc_request_mbox()
remoteproc: wkup_m3: Use devm_rproc_add() helper
remoteproc: wkup_m3: Use devm_rproc_alloc() helper
remoteproc: wkup_m3: Use devm action to call PM runtime put sync
remoteproc: wkup_m3: Use devm_pm_runtime_enable() helper
remoteproc: keystone: Use devm_rproc_add() helper
...
|
|
Move several embedded controller bindings (like ChromeOS EC, Gateworks
System Controller and Kontron sl28cpld Board Management) to new
subdirectory "embedded-controller" matching their purpose.
An embedded controller (EC) is a discrete component that contains a
microcontroller (i.e. a small CPU running a small firmware without
operating system) mounted into a larger computer system running
a fully fledged operating system that needs to utilize the embedded
controller as part of its operation.
So far the EC bindings were split between "mfd" and "platform"
directory. MFD name comes from Linux, not hardware, and "platform" is a
bit too generic.
Rename Gateworks GSC and Huawei Gaokun filenames to match compatible, as
preferred for bindings.
Acked-by: Michael Walle <mwalle@kernel.org> # for sl28cpld
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Mark Brown <broonie@kernel.org>
Reviewed-by: "Rob Herring (Arm)" <robh@kernel.org>
Link: https://lore.kernel.org/r/20250825081201.9775-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Document the bindings for the ADSP, CDSP, MPSS and WPSS PAS on the Milos
(e.g. SM7635) SoC.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250915-sm7635-remoteprocs-v5-1-96526cac59c6@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Correct the interrupt number of ready and handover in the DTS example.
Fixes: af5da7b0944c ("dt-bindings: remoteproc: qcom,sa8775p-pas: Document the SA8775p ADSP, CDSP and GPDSP")
Signed-off-by: Lijuan Gao <lijuan.gao@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250612-correct_interrupt_for_remoteproc-v1-1-490ee6d92a1b@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Document the components used to boot the ADSP and CDSP on the Qualcomm
QCS615 SoC. Use fallback to indicate the compatibility of the remoteproc
on the QCS615 with that on the SM8150.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Lijuan Gao <quic_lijuang@quicinc.com>
Link: https://lore.kernel.org/r/20250526-add_qcs615_remoteproc_support-v4-1-06a7d8bed0b5@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Commit 4b4ab93ddc5f ("dt-bindings: remoteproc: Consolidate SC8180X and
SM8150 PAS files") moved SC8180X bindings from separate file into this
one, but it forgot to add actual compatibles in top-level properties
section making the entire binding un-selectable (no-op) for SC8180X PAS.
Fixes: 4b4ab93ddc5f ("dt-bindings: remoteproc: Consolidate SC8180X and SM8150 PAS files")
Cc: stable@vger.kernel.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250428075243.44256-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
From the software POV, it matches the SM8350's implementation.
Describe it as such, with a fallback.
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Tested-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> # Lenovo X13s
Link: https://lore.kernel.org/r/20250503-topic-8280_slpi-v1-1-9400a35574f7@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add the 'firmware-name' property to the remote processor binding
to allow specifying the default firmware name in the device tree.
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20250327082721.641278-2-arnaud.pouliquen@foss.st.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
|
|
SC8180X PAS bindings are plain wrong, resulting in false-positive
dt checker errors. SC8180X's remoteprocs happen to be identical to
SM8150's from the kernel point of view, so reuse that binding instead.
Fixes: 4865ed136045 ("dt-bindings: remoteproc: qcom: pas: Add SC8180X adsp, cdsp and mpss")
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20241116-topic-sc8180x_rproc_bindings-v1-1-ae5d3f7ab261@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add remote processor PAS loader for SM8750 MPSS (modem). Device looks
fully compatible with SM8650, however it lacks fifth memory region for
Qlink Logging, according to downstream sources. This is a bit tricky,
because updated downstream sources for newer downstream release dropped
that fifth memory region as well.
There might be other differences against SM8650, because the modem
currently crashes after starting.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250221160300.160404-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
platforms
Support platforms such as MSM8226 and MSM8974 with only one power rail
(CX) modelled as power domain while MX and PX are regulators.
[luca: reword commit message, expand based on feedback from
Stephan Gerhold]
Signed-off-by: Matti Lehtimäki <matti.lehtimaki@gmail.com>
Signed-off-by: Luca Weiss <luca@lucaweiss.eu>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250206-wcnss-singlepd-v2-1-9a53ee953dee@lucaweiss.eu
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Compared to MSM8226 the LTE-capable MSM8926 requires mss-supply and
doesn't require qcom,ext-bhs-reg.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Luca Weiss <luca@lucaweiss.eu>
Link: https://lore.kernel.org/r/20250217-msm8226-modem-v5-3-2bc74b80e0ae@lucaweiss.eu
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add support for external power block headswitch (BHS) registers.
Similarly to MSM8974 also MSM8226 has the mx voltage rail exposed as
regulator and only cx voltage rail as power domain.
Signed-off-by: Matti Lehtimäki <matti.lehtimaki@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Luca Weiss <luca@lucaweiss.eu>
Link: https://lore.kernel.org/r/20250217-msm8226-modem-v5-2-2bc74b80e0ae@lucaweiss.eu
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
power domain
Add support for platforms such as MSM8974 which have the mx voltage rail
exposed as regulator and only cx voltage rail as power domain.
Signed-off-by: Matti Lehtimäki <matti.lehtimaki@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Luca Weiss <luca@lucaweiss.eu>
Link: https://lore.kernel.org/r/20250217-msm8226-modem-v5-1-2bc74b80e0ae@lucaweiss.eu
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add remote processor PAS loader for SM8750 CDSP processor, compatible
with earlier SM8650 with minor difference: one more sixth shutdown
interrupt.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250221160036.159557-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
format in DTS example
All Qualcomm firmwares uploaded to linux-firmware are in MBN format,
instead of split MDT. No functional changes, just correct the DTS
example so people will not rely on unaccepted files.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250226145103.10839-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"DT Bindings:
- Add Bindings for QCom QCS615 UFS, QCom IPQ5424 DWC3 USB, NXP imx7d
MIPI DSI, QCom SM8750 PDC, QCom MSM8976 SRAM, QCom ipq6018 temp
sensor, QCom QCS8300 Power Domain Controller, QCom QCS615 Power
Domain Controller, QCom QCS615 APSS, QCom QCS615 qfprom, QCom
QCS8300 remoteproc, Mediatek MT6328 PMIC, Allwinner A100 OPP, and
NXP iMX35 GPT
- Convert Altera socfpga-system, raspberrypi,bcm2835-power to DT
schema
- Add Siflower vendor prefix
- Cleanup display, interrupt-controller, and UFS binding examples'
indentation
- Document preferred line wrapping (the same as the rest of the
kernel)
DT Core:
- Add warning when of_property_read_bool() is used on non-boolean
properties
- Restore keeping bootloader DTB when booting with ACPI. Turns out
some x86 platforms relied on that. Shrug.
- Fix of_find_node_opts_by_path() handling of alias+path+options
- Fix resource bounds checking for empty resources
- A bunch of small fixes/cleanups all over from Zijun Hu
- Cleanups in bin_attribute handling"
* tag 'devicetree-for-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (50 commits)
of: address: Fix empty resource handling in __of_address_resource_bounds()
of/fdt: Restore possibility to use both ACPI and FDT from bootloader
docs: dt-bindings: Document preferred line wrapping
dt-bindings: ufs: Correct indentation and style in DTS example
of: Correct element count for two arrays in API of_parse_phandle_with_args_map()
of: reserved-memory: Warn for missing static reserved memory regions
of: Do not expose of_alias_scan() and correct its comments
dt-bindings: ufs: qcom: Add UFS Host Controller for QCS615
dt-bindings: usb: qcom,dwc3: Add IPQ5424 to USB DWC3 bindings
dt-bindings: arm: coresight: Update the pattern of ete node name
of: Warn when of_property_read_bool() is used on non-boolean properties
device property: Split property reading bool and presence test ops
of/fdt: Check fdt_get_mem_rsv() error in early_init_fdt_scan_reserved_mem()
of: reserved-memory: Move an assignment to effective place in __reserved_mem_alloc_size()
of: reserved-memory: Do not make kmemleak ignore freed address
of: reserved-memory: Fix using wrong number of cells to get property 'alignment'
of: Remove a duplicated code block
of: property: Avoiding using uninitialized variable @imaplen in parse_interrupt_map()
of: Correct child specifier used as input of the 2nd nexus node
dt-bindings: interrupt-controller: ti,omap4-wugen-mpu: Add file extension
...
|
|
Document the components used to boot the ADSP, CDSP and GPDSP on the
Qualcomm QCS8300 SoC. Use fallback to indicate the compatibility of the
remoteproc on the QCS8300 with that on the SA8775P.
Co-developed-by: Xin Liu <quic_liuxin@quicinc.com>
Signed-off-by: Xin Liu <quic_liuxin@quicinc.com>
Signed-off-by: Jingyi Wang <quic_jingyw@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240925-qcs8300_remoteproc_binding-v3-1-21b0c52b142b@quicinc.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
For more than a year all emails to Bhupesh Sharma's Linaro emails bounce
and there were no updates to mailmap. No reviews from Bhupesh, either,
so change the maintainer to Bjorn and Konrad (Qualcomm SoC maintainers).
Cc: Bhupesh Sharma <bhupesh.linux@gmail.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Konrad Dybcio <konradybcio@kernel.org>
Message-ID: <20241130094758.15553-1-krzysztof.kozlowski@linaro.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Document compatible for audio DSP on Qualcomm SAR2130P platform.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20241027-sar2130p-adsp-v1-1-bd204e39d24e@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Document compatible for Qualcomm SM8750 SoC ADSP PAS which looks fully
compatible with SM8550 variant. The only difference from bindings point
of view is one more interrupt ("shutdown-ack"). Marking devices as
compatible, using SM8550 ADSP PAS fallback, requires changing some of
the conditionals in "if:then:" to "contains".
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Melody Olvera <quic_molvera@quicinc.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20241101170309.382782-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux
Pull remoteproc updates from Bjorn Andersson:
- Add remoteproc support for the Cortex M4F found in AM62x and AM64x of
the TI K3 family, support for the modem remoteproc in the Qualcomm
SDX75, and audio, compute and general-purpose DSPs of the Qualcomm
SA8775P.
- Add support for blocking and non-blocking mailbox transmissions to
the i.MX remoteproc driver, and implement poweroff and reboot
mechanisms using them. Plus a few bug fixes and minor improvements.
- Cleanups and bug fixes for the TI K3 DSP and R5F drivers
- Support mapping SRAM regions into the AMD-Xilinx Zynqmp R5 cores
- Use devres helpers for various allocations in the Ingenic, TI DA8xx,
TI Keystone, TI K3, ST slim drivers
- Replace uses of of_{find,get}_property() with of_property_present()
where possible
* tag 'rproc-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux: (25 commits)
remoteporc: ingenic: Use devm_platform_ioremap_resource_byname()
remoteproc: da8xx: Use devm_platform_ioremap_resource_byname()
remoteproc: st_slim: Use devm_platform_ioremap_resource_byname()
remoteproc: xlnx: Add sram support
remoteproc: k3-r5: Fix error handling when power-up failed
remoteproc: imx_rproc: Add support for poweroff and reboot
remoteproc: imx_rproc: Allow setting of the mailbox transmit mode
remoteproc: k3-r5: Delay notification of wakeup event
remoteproc: k3-m4: Add a remoteproc driver for M4F subsystem
remoteproc: k3: Factor out TI-SCI processor control OF get function
dt-bindings: remoteproc: k3-m4f: Add K3 AM64x SoCs
remoteproc: k3-dsp: Acquire mailbox handle during probe routine
remoteproc: k3-r5: Acquire mailbox handle during probe routine
remoteproc: k3-r5: Use devm_rproc_alloc() helper
remoteproc: qcom: pas: Add support for SA8775p ADSP, CDSP and GPDSP
remoteproc: qcom: pas: Add SDX75 remoteproc support
dt-bindings: remoteproc: qcom,sm8550-pas: document the SDX75 PAS
remoteproc: keystone: Use devm_rproc_alloc() helper
remoteproc: keystone: Use devm_kasprintf() to build name string
dt-bindings: remoteproc: xlnx,zynqmp-r5fss: Add missing "additionalProperties" on child nodes
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"DT Bindings:
- Drop duplicate devices in trivial-devices.yaml
- Add a common serial peripheral device schema and reference it in
serial device schemas.
- Convert nxp,lpc1850-wdt, zii,rave-wdt, ti,davinci-wdt,
snps,archs-pct, fsl,bcsr, fsl,fpga-qixis-i2c, fsl,fpga-qixis,
fsl,cpm-enet, fsl,cpm-mdio, fsl,ucc-hdlc, maxim,ds26522,
aspeed,ast2400-cvic, aspeed,ast2400-vic, fsl,ftm-timer,
ti,davinci-timer, fsl,rcpm, and qcom,ebi2 to DT schema
- Add support for rockchip,rk3576-wdt, qcom,apss-wdt-sa8255p,
fsl,imx8qm-irqsteer, qcom,pm6150-vib, qcom,sa8255p-pdc,
isil,isl69260, ti,tps546d24, and lpc32xx DMA mux
- Drop duplicate nvidia,tegra186-ccplex-cluster.yaml and
mediatek,mt6795-sys-clock.yaml
- Add arm,gic ESPI and EPPI interrupt type specifiers
- Add another batch of legacy compatible strings which we have no
intention of documenting
- Add dmas/dma-names properties to FSL lcdif
- Fix wakeup-source reference to m8921-keypad.yaml
- Treewide fixes of typos in bindings
DT Core:
- Update dtc/libfdt to upstream version v1.7.0-95-gbcd02b523429
- More conversions to scoped iterators and __free() initializer
- Handle overflows in address resources on 32-bit systems
- Extend extracting compatible strings in sources from function
parameters
- Use of_property_present() in DT unittest
- Clean-up of_irq_to_resource() to use helpers
- Support #msi-cells=<0> in of_msi_get_domain()
- Improve the kerneldoc for of_property_match_string()
- kselftest: Ignore nodes that have ancestors disabled"
* tag 'devicetree-for-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (59 commits)
dt-bindings: watchdog: Add rockchip,rk3576-wdt compatible
dt-bindings: cpu: Drop duplicate nvidia,tegra186-ccplex-cluster.yaml
dt-bindings: clock: mediatek: Drop duplicate mediatek,mt6795-sys-clock.yaml
of/irq: Use helper to define resources
of/irq: Make use of irq_get_trigger_type()
dt-bindings: clk: vc5: Make SD/OE pin configuration properties not required
drivers/of: Improve documentation for match_string
of: property: Do some clean up with use of __free()
dt-bindings: watchdog: qcom-wdt: document support on SA8255p
dt-bindings: interrupt-controller: fsl,irqsteer: Document fsl,imx8qm-irqsteer
dt-bindings: interrupt-controller: arm,gic: add ESPI and EPPI specifiers
dt-bindings: dma: Add lpc32xx DMA mux binding
dt-bindings: trivial-devices: Drop duplicate "maxim,max1237"
dt-bindings: trivial-devices: Drop duplicate LM75 compatible devices
dt-bindings: trivial-devices: Deprecate "ad,ad7414"
dt-bindings: trivial-devices: Drop incorrect and duplicate at24 compatibles
dt-bindings: wakeup-source: update reference to m8921-keypad.yaml
dt-bindings: interrupt-controller: qcom-pdc: document support for SA8255p
dt-bindings: Fix various typos
of: address: Unify resource bounds overflow checking
...
|
|
Corrected several typos in Documentation/devicetree/bindings files.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com>
Signed-off-by: Yu-Chun Lin <eleanor15x@gmail.com>
Link: https://lore.kernel.org/r/20240905151943.2792056-1-eleanor15x@gmail.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers
Qualcomm driver updates for v6.12
Support is added for making SCM driver configure the system either for a
full or minimal ramdump following a system crash. The ramdump mode is
changed from being enable-only to enable/disable as requested.
The QSEECOM uefisecapp interface is allow-listed on Surface Laptop 7 and
Lenovo Thinkpad T14s, providing EFI variable access.
The change to match the SMD RPM driver based on the SMD channel name is
reverted, in favor of stepping back to OF-based matching, as a means to
get module autoloading to work properly.
AOSS, APR, ICE, OCMEM, PBS and SMP2P drivers has error handling cleaned
up using scoped resources.
Trace events are added to the BWMON and SMP2P drivers, for better
insights into their operations.
The X1E LLCC configuration data is updated based on recommended values.
A number of platforms are added to the in-kernel PD-mapper.
SocInfo driver is extended with IDs from SM7325, QCS8275 and QCS8300
families.
* tag 'qcom-drivers-for-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (33 commits)
firmware: qcom: scm: Allow QSEECOM on Surface Laptop 7 models
dt-bindings: soc: qcom: qcom,pmic-glink: Document SM7325 compatible
soc: qcom: pd_mapper: Add SM7325 compatible
soc: qcom: socinfo: Add Soc IDs for SM7325 family
dt-bindings: arm: qcom,ids: Add IDs for SM7325 family
soc: qcom: socinfo: add QCS8275/QCS8300 SoC ID
dt-bindings: arm: qcom,ids: add SoC ID for QCS8275/QCS8300
soc: qcom: smp2p: use scoped device node handling to simplify error paths
soc: qcom: pbs: use scoped device node handling to simplify error paths
soc: qcom: ocmem: use scoped device node handling to simplify error paths
soc: qcom: ice: use scoped device node handling to simplify error paths
soc: qcom: aoss: simplify with scoped for each OF child loop
soc: qcom: apr: simplify with scoped for each OF child loop
soc: qcom: smd-rpm: add qcom,smd-rpm compatible
dt-bindings: soc: qcom: smd-rpm: add generic compatibles
Revert "soc: qcom: smd-rpm: Match rpmsg channel instead of compatible"
firmware: qcom: scm: Add multiple download mode support
firmware: qcom: scm: Refactor code to support multiple dload mode
soc: qcom: pd_mapper: Add more older platforms without domains
soc: qcom: pd_mapper: Add X1E80100
...
Link: https://lore.kernel.org/r/20240904193042.15118-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
K3 AM64x SoC has a Cortex M4F subsystem in the MCU voltage domain.
The remote processor's life cycle management and IPC mechanisms are
similar across the R5F and M4F cores from remote processor driver
point of view. However, there are subtle differences in image loading
and starting the M4F subsystems.
The YAML binding document provides the various node properties to be
configured by the consumers of the M4F subsystem.
Signed-off-by: Martyn Welch <martyn.welch@collabora.com>
Signed-off-by: Hari Nagalla <hnagalla@ti.com>
Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240802152109.137243-2-afd@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
|
|
Add two generic compatibles to all smd-rpm devices, they follow the same
RPMSG protocol and are either accessed through the smd-edge or through
the glink-edge.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20240729-fix-smd-rpm-v2-2-0776408a94c5@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Document the MPSS Peripheral Authentication Service on SDX75 platform.
Signed-off-by: Naina Mehta <quic_nainmeht@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240709064924.325478-2-quic_nainmeht@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
"additionalProperties" on child nodes
All nodes need an explicit additionalProperties or unevaluatedProperties
unless a $ref has one that's false. Add missing additionalProperties
to fix dt_binding_check warning:
xlnx,zynqmp-r5fss.yaml: ^r(.*)@[0-9a-f]+$: Missing additionalProperties/unevaluatedProperties constraint
Fixes: 9e1b2a0757d0 ("dt-bindings: remoteproc: Add Tightly Coupled Memory (TCM) bindings")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Tanmay Shah <tanmay.shah@amd.com>
Link: https://lore.kernel.org/r/20240811153438.126457-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
|
|
Use my @kernel.org address everywhere.
Signed-off-by: Konrad Dybcio <konradybcio@kernel.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240726-topic-konrad_email-v1-3-f94665da2919@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux
Pull remoteproc updates from Bjorn Andersson:
- The maximum amount of DDR memory used by the Mediatek MT8188/MT8195
SCP is increased to handle new use cases. Handling of optional L1TCM
memory is made actually optional.
- An optimization is introduced to only clear the unused portion of IPI
shared buffers, rather than the entire buffer before writing the
message.
- Detection for IPC-only mode in the TI K3 DSP remoteproc driver is
corrected. The loglevel of a debug print in the same is lowered from
error.
- Support for attaching to an running remote processor is added to the
Xilinx R5F.
- An in-kernel implementation of the Qualcomm "protected domain mapper"
(aka service registry) service is introduced, to remove the
dependency on a userspace implementation to detect when the battery
monitor and USB Type-C port manager becomes available. This is then
integrated with the Qualcomm remoteproc driver.
- The Qualcomm PAS remoteproc driver gains support for attempting to
bust hwspinlocks held by the remote processor when it
crashed/stopped.
- The TI OMAP remoteproc driver is transitioned to use devres helpers
for various forms of allocations.
- Parsing of memory-regions in the i.MX remoteproc driver is improved
to avoid a NULL pointer dereference if the phandle reference is
empty. of_node reference counting is corrected in the same.
* tag 'rproc-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux:
remoteproc: mediatek: Increase MT8188/MT8195 SCP core0 DRAM size
remoteproc: k3-dsp: Fix log levels where appropriate
remoteproc: xlnx: Add attach detach support
remoteproc: qcom: select AUXILIARY_BUS
remoteproc: k3-r5: Fix IPC-only mode detection
remoteproc: mediatek: Don't attempt to remap l1tcm memory if missing
remoteproc: qcom: enable in-kernel PD mapper
dt-bindings: remoteproc: imx_rproc: Add minItems for power-domain
remoteproc: imx_rproc: Fix refcount mistake in imx_rproc_addr_init
remoteproc: omap: Use devm_rproc_add() helper
remoteproc: omap: Use devm action to release reserved memory
remoteproc: omap: Use devm_rproc_alloc() helper
remoteproc: imx_rproc: Skip over memory region when node value is NULL
dt-bindings: remoteproc: k3-dsp: Correct optional sram properties for AM62A SoCs
remoteproc: qcom_q6v5_pas: Add hwspinlock bust on stop
soc: qcom: smem: Add qcom_smem_bust_hwspin_lock_by_host()
remoteproc: mediatek: Zero out only remaining bytes of IPI buffer
|
|
and GPDSP
Document the components used to boot the ADSP, CDSP0, CDSP1, GPDSP0 and
GPDSP1 on the SA8775p SoC.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
"fsl,imx8qxp-cm4" and "fsl,imx8qm-cm4" need minimum 2 power domains. Other
platform doesn't require 'power-domain'.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20240610151721.274424-1-Frank.Li@nxp.com
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
|
|
The C7xv-dsp on AM62A have 32KB L1 I-cache and a 64KB L1 D-cache. It
does not have an addressable l1dram . So, remove this optional sram
property from the bindings to fix device tree build warnings.
Signed-off-by: Hari Nagalla <hnagalla@ti.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240604171450.2455-1-hnagalla@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
|
