| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt updates from Greg KH:
"Here is the "big" set of USB and Thunderbolt driver updates for
7.0-rc1. Overall more lines were removed than added, thanks to
dropping the obsolete isp1362 USB host controller driver, always a
nice change.
Other than that, nothing major happening here, highlights are:
- lots of dwc3 driver updates and new hardware support added
- usb gadget function driver updates
- usb phy driver updates
- typec driver updates and additions
- USB rust binding updates for syntax and formatting changes
- more usb serial device ids added
- other smaller USB core and driver updates and additions
All of these have been in linux-next for a long time, with no reported
problems"
* tag 'usb-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (77 commits)
usb: typec: ucsi: Add Thunderbolt alternate mode support
usb: typec: hd3ss3220: Check if regulator needs to be switched
usb: phy: tegra: parametrize PORTSC1 register offset
usb: phy: tegra: parametrize HSIC PTS value
usb: phy: tegra: return error value from utmi_wait_register
usb: phy: tegra: cosmetic fixes
dt-bindings: usb: renesas,usbhs: Add RZ/G3E SoC support
usb: dwc2: fix resume failure if dr_mode is host
usb: cdns3: fix role switching during resume
usb: dwc3: gadget: Move vbus draw to workqueue context
USB: serial: option: add Telit FN920C04 RNDIS compositions
usb: dwc3: Log dwc3 address in traces
usb: gadget: tegra-xudc: Add handling for BLCG_COREPLL_PWRDN
usb: phy: tegra: add HSIC support
usb: phy: tegra: use phy type directly
usb: typec: ucsi: Enforce mode selection for cros_ec_ucsi
usb: typec: ucsi: Support mode selection to activate altmodes
usb: typec: Introduce mode_selection bit
usb: typec: Implement mode selection
usb: typec: Expose alternate mode priority via sysfs
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"DT core:
- Sync dtc/libfdt with upstream v1.7.2-62-ga26ef6400bd8
- Add a for_each_compatible_node_scoped() loop and convert users in
cpufreq, dmaengine, clk, cdx, powerpc and Arm
- Simplify of/platform.c with scoped loop helpers
- Add fw_devlink tracking for "mmc-pwrseq"
- Optimize fw_devlink callback code size for pinctrl-N properties
- Replace strcmp_suffix() with strends()
DT bindings:
- Support building single binding targets
- Convert google,goldfish-fb, cznic,turris-mox-rwtm, ti,prm-inst
- Add bindings for Freescale AVIC, Realtek RTD1xxx system
controllers, Microchip 25AA010A EEPROM, OnSemi FIN3385, IEI
WT61P803 PUZZLE, Delta Electronics DPS-800-AB power supply,
Infineon IR35221 Digital Multi-phase Controller, Infineon PXE1610
Digital Dual Output 6+1 VR12.5 & VR13 CPU Controller,
socionext,uniphier-smpctrl, and xlnx,zynqmp-firmware
- Lots of trivial binding fixes to address warnings in DTS files.
These are mostly for arm64 platforms which is getting closer to be
warning free. Some public shaming has helped.
- Fix I2C bus node names in examples
- Drop obsolete brcm,vulcan-soc binding
- Drop unreferenced binding headers"
* tag 'devicetree-for-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (60 commits)
dt-bindings: interrupt-controller: Add compatiblie string fsl,imx(1|25|27|31|35)-avic
dt-bindings: soc: imx: add fsl,aips and fsl,emi compatible strings
dt-bindings: display: bridge: lt8912b: Drop reset gpio requirement
dt-bindings: firmware: fsl,scu: Mark multi-channel MU layouts as deprecated
cpufreq: s5pv210: Simplify with scoped for each OF child loop
dmaengine: fsl_raid: Simplify with scoped for each OF child loop
clk: imx: imx31: Simplify with scoped for each OF child loop
clk: imx: imx27: Simplify with scoped for each OF child loop
cdx: Use mutex guard to simplify error handling
cdx: Simplify with scoped for each OF child loop
powerpc/wii: Simplify with scoped for each OF child loop
powerpc/fsp2: Simplify with scoped for each OF child loop
ARM: exynos: Simplify with scoped for each OF child loop
ARM: at91: Simplify with scoped for each OF child loop
of: Add for_each_compatible_node_scoped() helper
dt-bindings: Fix emails with spaces or missing brackets
scripts/dtc: Update to upstream version v1.7.2-62-ga26ef6400bd8
dt-bindings: crypto: inside-secure,safexcel: Mandate only ring IRQs
dt-bindings: crypto: inside-secure,safexcel: Add SoC compatibles
of: reserved_mem: Fix placement of __free() annotation
...
|
|
Document the Renesas USBHS controller found on the Renesas RZ/G3E SoC.
The USBHS block on RZ/G3E is functionally identical to the one found
on the RZ/G2L family, so no driver changes are needed. The existing
"renesas,rzg2l-usbhs" fallback compatible will continue to be used for
handling this IP.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260129165412.557643-1-tommaso.merciai.xr@bp.renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
I2C bus node names are expected to be just "i2c", if there is just one
such node in given example. Replace remaining bad examples with
scripted:
git grep -l '\si2c[0-9] {' Documentation/devicetree/ | xargs sed -i -e 's/i2c[0-9] {/i2c {/'
Suggested-by: Rob Herring <robh@kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patch.msgid.link/20260114081322.53411-2-krzysztof.kozlowski@oss.qualcomm.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
We need the USB fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The WCH CH334/CH335[0] are USB2.0 protocol compliant 4-port USB HUB
controller chips, supporting USB2.0 high-speed and full-speed for
upstream ports, and USB2.0 high-speed 480Mbps, full-speed 12Mbps and
low-speed 1.5Mbps for downstream ports, supporting not only low-cost STT
mode (single TT schedules 4 downstream ports in time share), but also
supports high performance MTT mode (4 TTs each corresponding to 1 port,
concurrent processing).
Add a device tree binding for it.
[0]: https://www.wch-ic.com/downloads/CH334DS1_PDF.html
Signed-off-by: Chaoyi Chen <chaoyi.chen@rock-chips.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20260113095827.115-2-kernel@airkyi.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
According to the reference manual, MSM8994 does have QUSB2 PHY and does
not have DP/DM IRQs interrupts. It is also logical it has the same
constraints as similar device: MSM8996.
This fixes dtbs_check warnings like:
msm8994-sony-xperia-kitakami-karin.dtb: usb@f92f8800 (qcom,msm8994-dwc3): interrupt-names:1: 'hs_phy_irq' was expected
msm8994-sony-xperia-kitakami-karin.dtb: usb@f92f8800 (qcom,msm8994-dwc3): interrupt-names:2: 'dp_hs_phy_irq' was expected
msm8994-sony-xperia-kitakami-karin.dtb: usb@f92f8800 (qcom,msm8994-dwc3): interrupt-names:3: 'dm_hs_phy_irq' was expected
Fixes: 53c6d854be4e ("dt-bindings: usb: dwc3: Clean up hs_phy_irq in binding")
Fixes: 6e762f7b8edc ("dt-bindings: usb: Introduce qcom,snps-dwc3")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260106185012.19551-4-krzysztof.kozlowski@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
According to reference manual, IPQ5018 does not have QUSB2 PHY and its
interrupts should rather match ones used in IPQ5332 (so power_event,
eud_dmse_int_mx, eud_dpse_int_mx).
Fixes: 53c6d854be4e ("dt-bindings: usb: dwc3: Clean up hs_phy_irq in binding")
Fixes: 6e762f7b8edc ("dt-bindings: usb: Introduce qcom,snps-dwc3")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260106185012.19551-3-krzysztof.kozlowski@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The Socionext Uniphier DWC3 controller binding is already in use, but
undocumented. It's a straight-forward binding similar to other DWC3
bindings.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Link: https://patch.msgid.link/20260105162418.2842825-1-robh@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Microchip LAN969x has DWC3 compatible controller, though limited to 2.0(HS)
speed, so document it.
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20251229184004.571837-2-robert.marko@sartura.hr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We need the USB fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Document the device tree bindings for the DWC3 USB controller found in
Google Tensor SoCs, starting with the G5 generation (codename: laguna).
The Tensor G5 silicon represents a complete architectural departure from
previous generations (like gs101), including entirely new clock/reset
schemes, top-level wrapper and register interface. Consequently,
existing Samsung/Exynos DWC3 USB bindings are incompatible, necessitating
this new device tree binding.
The USB controller on Tensor G5 is based on Synopsys DWC3 IP and features
Dual-Role Device single port with hibernation support.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Roy Luo <royluo@google.com>
Link: https://patch.msgid.link/20251218-controller-v10-1-4047c9077274@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
EHCI and OHCI controllers can be DMA coherent on some platforms, so
allow the "dma-coherent" property.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20251215212515.3318052-1-robh@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add the "aspeed,ast2700-usb-vhub" compatible. The ast2700 vhub
controller requires an reset, so make the "resets" property
mandatory for this compatible to reflect the hardware requirement.
Signed-off-by: Ryan Chen <ryan_chen@aspeedtech.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20251128-upstream_vhub-v2-1-1fa66a5833c2@aspeedtech.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
My name is stamped into maintainership for a big slew of DT
bindings. Now that it is changing, switch it over to my
kernel.org mail address, which will hopefully be stable for the
rest of my life.
Signed-off-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20251216-maintainers-dt-v1-1-0b5ab102c9bb@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB/Thunderbolt updates from Greg KH:
"Here is the big set of USB and Thunderbolt driver updates for
6.19-rc1. Nothing major here, just lots of tiny updates for most of
the common USB drivers. Included in here are:
- more xhci driver updates and fixes
- Thunderbolt driver cleanups
- usb serial driver updates
- typec driver updates
- USB tracepoint additions
- dwc3 driver updates, including support for Apple hardware
- lots of other smaller driver updates and cleanups
All of these have been in linux-next for a while with no reported
issues"
* tag 'usb-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (161 commits)
usb: gadget: tegra-xudc: Always reinitialize data toggle when clear halt
USB: serial: option: move Telit 0x10c7 composition in the right place
USB: serial: option: add Telit Cinterion FE910C04 new compositions
usb: typec: ucsi: fix use-after-free caused by uec->work
usb: typec: ucsi: fix probe failure in gaokun_ucsi_probe()
usb: dwc3: core: Remove redundant comment in core init
usb: phy: Initialize struct usb_phy list_head
USB: serial: option: add Foxconn T99W760
usb: usb-storage: No additional quirks need to be added to the EL-R12 optical drive.
usb: typec: hd3ss3220: Enable VBUS based on ID pin state
dt-bindings: usb: ti,hd3ss3220: Add support for VBUS based on ID state
usb: typec: anx7411: add WQ_PERCPU to alloc_workqueue users
USB: add WQ_PERCPU to alloc_workqueue users
dt-bindings: usb: dwc3-xilinx: Describe the reset constraint for the versal platform
drivers/usb/storage: use min() instead of min_t()
usb: raw-gadget: cap raw_io transfer length to KMALLOC_MAX_SIZE
usb: ohci-da8xx: remove unused platform data
usb: gadget: functionfs: use dma_buf_unmap_attachment_unlocked() helper
usb: uas: reduce time under spinlock
usb: dwc3: eic7700: Add EIC7700 USB driver
...
|
|
Pull SoC devicetree updates from Arnd Bergmann:
"Three new SoCs got added in existing arm64 chip families:
- Renesas R-Car X5H (R8A78000) is a new generation of automotive
SoCs, based on 16 Cortex-A720 (Armv9.2) cores, which makes the the
currently highest-perforance embedded SoC.
- TI AM62L is a new variant of the AM62 family of industrial SoCs,
this one comes without a GPU.
- Qualcomm MSM8937 (Snapdragon 430) is an older mobile phone chip
based on Cortex-A53, and closely related to MSM8917 (Snapdragn
425), which we already support.
In addition, there are a good number of newly supported machines
across SoC families:
- Two Aspeed AST2600 (Cortex-A7) based BMC setups for large servers
- Mobile Phones and tables based on Mediatek MT6582, Nvidia Tegra124,
Qualcomm MSM8937 and Qualcomm MSM8939,
- Two Laptops based on Qualcomm SoCs: one using the older sdm850, the
other using x1p42100.
- One Router based on Rockchips RK3568
- 24 variants of the Enclustra Mercury system-on-module, all based on
32-bit Intel/Altera SocFPGA chips, plus two boards using 64-bit
SocFPGA Agilex chips..
- 30 industrial/embedded boards and single-board computers, using
various chips from NXP, Rockchips, Mediatek, TI, Amlogic, Qualcomm,
Spacemit, and Starfive.
In total there are 783 commits here, the majority of these improving
hardware support and cleaning up devicetree files across the tree,
with the majority of the changes going into the Qualcomm, NXP, Renesas
and Rockchips platforms"
* tag 'soc-dt-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (782 commits)
arm64: dts: mediatek: mt8195: Fix address range for JPEG decoder core 1
ARM: dts: samsung: exynos4412-midas: turn off SDIO WLAN chip during system suspend
ARM: dts: samsung: exynos4210-trats: turn off SDIO WLAN chip during system suspend
ARM: dts: samsung: exynos4210-i9100: turn off SDIO WLAN chip during system suspend
ARM: dts: samsung: universal_c210: turn off SDIO WLAN chip during system suspend
arm64: dts: amlogic: meson-g12b: Fix L2 cache reference for S922X CPUs
arm64: dts: Add gpio_intc node for Amlogic S7D SoCs
arm64: dts: Add gpio_intc node for Amlogic S7 SoCs
arm64: dts: Add gpio_intc node for Amlogic S6 SoCs
arm64: dts: amlogic: s7d: add ao secure node
arm64: dts: amlogic: s7: add ao secure node
arm64: dts: amlogic: s6: add ao secure node
arm64: dts: amlogic: Fix the register name of the 'DBI' region
dts: arm64: amlogic: add a5 pinctrl node
arm64: dts: amlogic: s7d: add power domain controller node
arm64: dts: amlogic: s7: add power domain controller node
arm64: dts: amlogic: s6: add power domain controller node
dts: arm64: amlogic: Add ISP related nodes for C3
arm64: dts: meson: add initial device-tree for Tanix TX9 Pro
dt-bindings: arm: amlogic: add support for Tanix TX9 Pro
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"DT bindings:
- Convert lattice,ice40-fpga-mgr, apm,xgene-storm-dma,
brcm,sr-thermal, amazon,al-thermal, brcm,ocotp, mt8173-mdp, Actions
Owl SPS, Marvell AP80x System Controller, Marvell CP110 System
Controller, cznic,moxtet, and apm,xgene-slimpro-mbox to DT schema
format
- Add i.MX95 fsl,irqsteer, MT8365 Mali Bifrost GPU, Anvo ANV32C81W
EEPROM, and Microchip pic64gx PLIC
- Add missing LGE, AMD Seattle, and APM X-Gene SoC platform
compatibles
- Updates to brcm,bcm2836-l1-intc, brcm,bcm2835-hvs, and bcm2711-hdmi
bindings to fix warnings on BCM2712 platforms
- Drop obsolete db8500-thermal.txt
- Treewide clean-up of extra blank lines and inconsistent quoting
- Ensure all .dtbo targets are applied to a base .dtb
- Speed up dt_binding_check by skipping running validation on empty
examples
DT core:
- Add of_machine_device_match() and of_machine_get_match_data()
helpers and convert users treewide
- Fix bounds checking of address properties in FDT code. Rework the
code to have a single implementation of the bounds checks.
- Rework of_irq_init() to ignore any implicit interrupt-parent (i.e.
in a parent node) on nodes without an interrupt. This matches the
spec description and fixes some RISC-V platforms.
- Avoid a spurious message on overlay removal
- Skip DT kunit tests on RISCV+ACPI"
* tag 'devicetree-for-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (55 commits)
dt-bindings: kbuild: Skip validating empty examples
dt-bindings: interrupt-controller: brcm,bcm2836-l1-intc: Drop interrupt-controller requirement
dt-bindings: display: Fix brcm,bcm2835-hvs bindings for BCM2712
dt-bindings: display: bcm2711-hdmi: Add interrupt details for BCM2712
of: Skip devicetree kunit tests when RISCV+ACPI doesn't populate root node
soc: tegra: Simplify with of_machine_device_match()
soc: qcom: ubwc: Simplify with of_machine_get_match_data()
powercap: dtpm: Simplify with of_machine_get_match_data()
platform: surface: Simplify with of_machine_get_match_data()
irqchip/atmel-aic: Simplify with of_machine_get_match_data()
firmware: qcom: scm: Simplify with of_machine_device_match()
cpuidle: big_little: Simplify with of_machine_device_match()
cpufreq: sun50i: Simplify with of_machine_device_match()
cpufreq: mediatek: Simplify with of_machine_get_match_data()
cpufreq: dt-platdev: Simplify with of_machine_get_match_data()
of: Add wrappers to match root node with OF device ID tables
dt-bindings: eeprom: at25: Add Anvo ANV32C81W
of/reserved_mem: Simplify the logic of __reserved_mem_alloc_size()
of/reserved_mem: Simplify the logic of fdt_scan_reserved_mem_reg_nodes()
of/reserved_mem: Simplify the logic of __reserved_mem_reserve_reg()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/dt
dt-bindings: Changes for v6.19-rc1
Document various new IPs on older chips, as well as some existing
developer kits that were missing compatible strings. Add power domain
IDs on Tegra264 and wake-up support for the XUSB controller on Tegra234.
* tag 'tegra-for-6.19-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
dt-bindings: usb: Add wake-up support for Tegra234 XUSB host controller
dt-bindings: devfreq: tegra30-actmon: Add Tegra124 fallback for Tegra210
dt-bindings: display: tegra: Document Tegra20 and Tegra30 CSI
dt-bindings: display: tegra: document EPP, ISP, MPE and TSEC for Tegra114+
dt-bindings: arm: tegra: Document Jetson Nano Devkits
dt-bindings: power: Add power domain IDs for Tegra264
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Update the bindings to support reading ID state and VBUS, as per the
HD3SS3220 data sheet. The ID pin is kept high if VBUS is not at VSafe0V and
asserted low once VBUS is at VSafe0V, enforcing the Type-C requirement that
VBUS must be at VSafe0V before re-enabling VBUS.
Add id-gpios property to describe the input gpio for USB ID pin.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Krishna Kurapati <krishna.kurapati@oss.qualcomm.com>
Link: https://patch.msgid.link/20251111072025.2199142-2-krishna.kurapati@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
platform
AMD Versal platform USB 2.0 IP controller receives one reset input from
the SoC controlled by the CRL.RST_USB [RESET] register so accordingly
describe reset constraints.
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://patch.msgid.link/20251114123239.1929255-1-radhey.shyam.pandey@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add Device Tree binding documentation for the ESWIN EIC7700
usb controller module.
Signed-off-by: Senchuan Zhang <zhangsenchuan@eswincomputing.com>
Signed-off-by: Hang Cao <caohang@eswincomputing.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20251112055321.1638-1-caohang@eswincomputing.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Kaanapali uses a single-node USB controller architecture with the Synopsys
DWC3 controller. Add this to the compatibles list to utilize the DWC3 QCOM
and DWC3 core framework.
Signed-off-by: Ronak Raheja <ronak.raheja@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com>
Link: https://patch.msgid.link/20251029-knp-usb-dwc3-v3-1-6d3a72783336@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
modify dt-binding for support mt8189 dts node of xhci
Signed-off-by: Jack Hsu <jh.hsu@mediatek.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20251111070031.305281-6-jh.hsu@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add device tree binding support for the USB3.2 Gen2 controller on Renesas
RZ/V2H(P) and RZ/V2N SoCs. The USB3.2 IP on these SoCs is identical to
that found on the RZ/G3E SoC.
Add new compatible strings "renesas,r9a09g056-xhci" for RZ/V2N and
"renesas,r9a09g057-xhci" for RZ/V2H(P). Both variants use
"renesas,r9a09g047-xhci" as a fallback compatible to indicate hardware
compatibility with the RZ/G3E implementation.
Update the title to be more generic as it now covers multiple SoC
families beyond just RZ/G3E.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20251101042440.648321-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Generally at most 1 blank line is the standard style for DT schema
files. Remove the few cases with more than 1 so that the yamllint check
for this can be enabled.
Acked-by: Lee Jones <lee@kernel.org>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> # remoteproc
Acked-by: Georgi Djakov <djakov@kernel.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
Acked-by: Andi Shyti <andi.shyti@kernel.org>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Uwe Kleine-König <ukleinek@kernel.org> # for allwinner,sun4i-a10-pwm.yaml
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> # mtd
Acked-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Acked-by: Manivannan Sadhasivam <mani@kernel.org> # For PCI controller bindings
Link: https://patch.msgid.link/20251023143957.2899600-1-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Populate USB wake events for Tegra234 XUSB host controller.
These wake-up events are optional to maintain backward compatibility and
because the USB controller does not require them for normal operation.
Signed-off-by: Haotien Hsu <haotienh@nvidia.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Introduce the compatible definition for Glymur QCOM SNPS DWC3.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Wesley Cheng <wesley.cheng@oss.qualcomm.com>
Link: https://patch.msgid.link/20251024-glymur_usb_subsystem-v1-1-bf6faf63b566@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We need the USB fixes in here as well to build on top of.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add qcom,sm8750-dwc3 compatible to flattened implementation binding.
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Krishna Kurapati <krishna.kurapati@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20251021050954.3462613-1-krishna.kurapati@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Apple Silicon uses Synopsys DesignWare dwc3 based USB controllers for
their Type-C ports.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Sven Peter <sven@kernel.org>
Link: https://patch.msgid.link/20251015-b4-aplpe-dwc3-v2-1-cbd65a2d511a@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add the missing multiport controller binding to target list.
Fix minItems for interrupt-names to avoid the following error on High
Speed controller:
usb@a200000: interrupt-names: ['dwc_usb3', 'pwr_event', 'dp_hs_phy_irq', 'dm_hs_phy_irq'] is too short
Fixes: 6e762f7b8edc ("dt-bindings: usb: Introduce qcom,snps-dwc3")
Cc: stable@vger.kernel.org
Signed-off-by: Krishna Kurapati <krishna.kurapati@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The ports definition currently defined in the usb-switch.yaml
fits standards devices which are either recipient of altmode
muxing and orientation switching events or an element of the
USB Super Speed data lanes.
This doesn't necessarely fit combo PHYs like the Qualcomm
USB3/DP Combo which has a different ports representation.
Move the ports definition to a separate usb-switch-ports.yaml
and reference it next to the usb-switch.yaml, except for
the Qualcomm USB3/DP Combo PHY bindings.
Reported-by: Rob Herring <robh@kernel.org>
Closes: https://lore.kernel.org/all/175462129176.394940.16810637795278334342.robh@kernel.org/
Fixes: 3bad7fe22796 ("dt-bindings: phy: qcom,sc8280xp-qmp-usb43dp: Reference usb-switch.yaml to allow mode-switch")
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Only i.MX8MP need dma-range property to let USB controller work properly.
Remove dma-range from required list and add limitation for imx8mp.
Fixes: d2a704e29711 ("dt-bindings: usb: dwc3-imx8mp: add imx8mp dwc3 glue bindings")
Cc: stable <stable@kernel.org>
Reviewed-by: Jun Li <jun.li@nxp.com>
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add a compatible for the exynos8890-dwusb3 node. It features the same
clocks and regulators as exynos7, so reuse its compatible.
Signed-off-by: Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250914135652.2626066-1-ivo.ivanov.ivanov1@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add missed compatible string for arm64 layerscape platform. Allow these
fallback to fsl,ls1028a-dwc3.
Remove fallback snps,dwc3 because layerscape dwc3 is not full compatible
with common snps,dwc3 device, a special value gsburstcfg0 need be set when
dma coherence enabled.
Allow iommus property.
Change ref to snps,dwc3-common.yaml to use dwc3 flatten library.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20250929-ls_dma_coherence-v5-1-2ebee578eb7e@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add "fsl,imx94-usbmisc" compatible.
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20250919071111.2558628-1-xu.yang_2@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The Marvell Armada 37xx and 8k platforms compatible property don't
match the binding schema. They are compatible with the "generic-xhci"
compatible. The 37xx does have a quirk for "reset on resume", but that's
probably not required to function in all situations.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250919223433.2399927-2-robh@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Allow "iommus" property as it's reasonable for any XHCI controller to be
behind an IOMMU. Allow "dr_mode" as an XHCI controller can be part of a
dual-role controller.
In particular, the Marvell Armada 8K XHCI controller uses both of these
properties.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250919223433.2399927-1-robh@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The DWC3 can be part of a power domain, so we need to allow the
relevant property 'power-domains'.
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20251007-power-domains-dt-bindings-usb-samsung-exynos-dwc3-v1-1-b63bacad2b42@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add the compatible string for Aspeed AST2700 SoC.
Signed-off-by: Ryan Chen <ryan_chen@aspeedtech.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20250928032407.27764-2-ryan_chen@aspeedtech.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add the compatible string for Aspeed AST2700 SoC.
Signed-off-by: Ryan Chen <ryan_chen@aspeedtech.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20250922052045.2421480-4-ryan_chen@aspeedtech.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The UHCI controller on Aspeed SoCs (including AST2700) requires
its reset line to be deasserted before the controller can be used.
Add an optional "resets" property to the UHCI device tree bindings
to describe the phandle to the reset controller.
This property is optional for platforms which do not require
explicit reset handling.
Signed-off-by: Ryan Chen <ryan_chen@aspeedtech.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20250922052045.2421480-2-ryan_chen@aspeedtech.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Document the Renesas RZ/G3E USB3.2 Gen2 Host Controller (a.k.a USB3HOST).
The USB3HOST is compliant with the Universal Serial Bus 3.2 Specification
Revision 1.0.
- Supports 1 downstream USB receptacles
- Number of SSP Gen2 or SS ports: 1
- Number of HS or FS or LS ports: 1
- Supports Super Speed Plus Gen2x1 (10 Gbps), Super Speed (5 Gbps),
High Speed (480 Mbps), Full Speed (12Mbps), and Low Speed (1.5 Mbps).
- Supports all transfer-types: Control, Bulk, Interrupt, Isochronous, and
these split-transactions.
- Supports Power Control and Over Current Detection.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20250916150255.4231-4-biju.das.jz@bp.renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Ze Huang <huang.ze@linux.dev> says:
The USB 3.0 controller found in the SpacemiT K1 SoC[1] supports both
USB3.0 Host and USB2.0 Dual-Role Device (DRD).
This controller is compatible with DesignWare Core USB 3 (DWC3) driver.
However, constraints in the `snps,dwc3` bindings limit the ability to
describe hardware-specific features in a clean and maintainable way.
While `dwc3-of-simple` still serves as a glue layer for many platforms,
it requires a split device tree node structure, which is less desirable
in newer platforms.
To promote a transition toward a flattened `dwc` node structure, this
series introduces `dwc3-generic-plat`, building upon prior efforts that
exposed the DWC3 core driver [2].
The device tree support for SpacemiT K1 will be submitted separately
when the associated PHY driver is ready.
Link: https://developer.spacemit.com/documentation?token=AjHDwrW78igAAEkiHracBI9HnTb [1]
Link: https://lore.kernel.org/all/20250414-dwc3-refactor-v7-3-f015b358722d@oss.qualcomm.com [2]
Link: https://lore.kernel.org/r/20250913-dwc3_generic-v8-0-b50f81f05f95@linux.dev
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add support for the USB 3.0 Dual-Role Device (DRD) controller embedded
in the SpacemiT K1 SoC. The controller is based on the Synopsys
DesignWare Core USB 3 (DWC3) IP, supporting USB3.0 host mode and USB 2.0
DRD mode.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Ze Huang <huang.ze@linux.dev>
Link: https://lore.kernel.org/r/20250913-dwc3_generic-v8-1-b50f81f05f95@linux.dev
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250913-dwc3_generic-v8-1-b50f81f05f95@linux.dev
|
|
Currently, the usb251xb assumes i2c control, but from HW point of
view, the hub supports usage case without any i2c control, I.E we
only want the gpio controls, for example the following dt node:
usb-hub {
compatible = "microchip,usb2512b";
reset-gpios = <&porta 8 GPIO_ACTIVE_LOW>;
};
Modify the dt-binding of usb2512b to support this usage case, and add
the usage example to the examples section.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250825234509.1041-2-jszhang@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Samsung S3C24xx family of SoCs was removed the Linux kernel in the
commit 61b7f8920b17 ("ARM: s3c: remove all s3c24xx support"), in January
2023. There are no in-kernel users of remaining S3C24xx compatibles.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250831122222.50332-4-krzysztof.kozlowski@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Convert the legacy TXT binding for the TWL6030 USB module
to the modern YAML DT schema format. This adds formal validation
and improves documentation using a conditional schema.
The legacy twlxxxx-usb.txt file is no longer needed and is removed.
Signed-off-by: Jihed Chaibi <jihed.chaibi.dev@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250824112338.64953-3-jihed.chaibi.dev@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Convert the legacy TXT binding for the TWL4030 USB module
to the modern YAML DT schema format. This adds formal validation
and improves documentation using a conditional schema.
Remove the twl4030 section from the obsolete .txt binding file
Signed-off-by: Jihed Chaibi <jihed.chaibi.dev@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250824112338.64953-2-jihed.chaibi.dev@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
