| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"The only slightly large change is the enablement of CIX HD-audio
controller, which took a bit time to be cooked up, while most of other
changes are device-specific small trivial fixes:
- Default disablement of the kconfig for decades old pre-release
alsa-lib PCM API; it's only the default config value change, so it
can't lead to any regressions for the existing setups
- Support for CIX HD-audio controller
- A few ASoC ACP fixes
- Fixes for ASoC cirrus, bcm, wcd, qcom, ak platforms
- Trivial hardening for FireWire and USB-audio
- HD-audio Intel binding fix and quirks"
* tag 'sound-fix-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (30 commits)
ALSA: hda/tas2781: Add new quirk for HP new project
ALSA: hda: cix-ipbloq: Use modern PM ops
ALSA: hda: intel-dsp-config: Prefer legacy driver as fallback
ASoC: amd: acp: update tdm channels for specific DAI
ASoC: cs35l56: Fix incorrect select SND_SOC_CS35L56_CAL_SYSFS_COMMON
ALSA: firewire-motu: add bounds check in put_user loop for DSP events
ASoC: cs35l41: Always return 0 when a subsystem ID is found
ALSA: uapi: Fix typo in asound.h comment
ALSA: Do not build obsolete API
ALSA: hda: add CIX IPBLOQ HDA controller support
ALSA: hda/core: add addr_offset field for bus address translation
ALSA: hda: dt-bindings: add CIX IPBLOQ HDA controller support
ALSA: hda/realtek: Add support for ASUS UM3406GA
ALSA: hda/realtek: Add support for HP Turbine Laptops
ALSA: usb-audio: Initialize status1 to fix uninitialized symbol errors
ALSA: firewire-motu: fix buffer overflow in hwdep read for DSP events
ALSA: hda: cs35l41: Fix NULL pointer dereference in cs35l41_hda_read_acpi()
ASoC: cros_ec_codec: Remove unnecessary selection of CRYPTO
ASoc: qcom: q6afe: fix bad guard conversion
ASoC: rockchip: Fix Wvoid-pointer-to-enum-cast warning (again)
...
|
|
ALSA 0.9.0-rc3 is from 2002, 23 years old.
Signed-off-by: David Heidelberg <david@ixit.cz>
Reviewed-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Reviewed-by: Christophe Leroy (CS GROUP) <chleroy@kernel.org>
Acked-by: Christophe Leroy (CS GROUP) <chleroy@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20251203-old-alsa-v1-1-ac80704f52c3@ixit.cz
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial updates from Greg KH:
"Here is the big set of tty/serial driver changes for 6.19-rc1. Nothing
major at all, just small constant churn to make the tty layer
"cleaner" as well as serial driver updates and even a new test added!
Included in here are:
- More tty/serial cleanups from Jiri
- tty tiocsti test added to hopefully ensure we don't regress in this
area again
- sc16is7xx driver updates
- imx serial driver updates
- 8250 driver updates
- new hardware device ids added
- other minor serial/tty driver cleanups and tweaks
All of these have been in linux-next for a while with no reported
issues"
* tag 'tty-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (60 commits)
serial: sh-sci: Fix deadlock during RSCI FIFO overrun error
dt-bindings: serial: rsci: Drop "uart-has-rtscts: false"
LoongArch: dts: Add uart new compatible string
serial: 8250: Add Loongson uart driver support
dt-bindings: serial: 8250: Add Loongson uart compatible
serial: 8250: add driver for KEBA UART
serial: Keep rs485 settings for devices without firmware node
serial: qcom-geni: Enable Serial on SA8255p Qualcomm platforms
serial: qcom-geni: Enable PM runtime for serial driver
serial: sprd: Return -EPROBE_DEFER when uart clock is not ready
tty: serial: samsung: Declare earlycon for Exynos850
serial: icom: Convert PCIBIOS_* return codes to errnos
serial: 8250-of: Fix style issues in 8250_of.c
serial: add support of CPCI cards
serial: mux: Fix kernel doc for mux_poll()
tty: replace use of system_unbound_wq with system_dfl_wq
serial: 8250_platform: simplify IRQF_SHARED handling
serial: 8250: make share_irqs local to 8250_platform
serial: 8250: move skip_txen_test to core
serial: drop SERIAL_8250_DEPRECATED_OPTIONS
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
- "panic: sys_info: Refactor and fix a potential issue" (Andy Shevchenko)
fixes a build issue and does some cleanup in ib/sys_info.c
- "Implement mul_u64_u64_div_u64_roundup()" (David Laight)
enhances the 64-bit math code on behalf of a PWM driver and beefs up
the test module for these library functions
- "scripts/gdb/symbols: make BPF debug info available to GDB" (Ilya Leoshkevich)
makes BPF symbol names, sizes, and line numbers available to the GDB
debugger
- "Enable hung_task and lockup cases to dump system info on demand" (Feng Tang)
adds a sysctl which can be used to cause additional info dumping when
the hung-task and lockup detectors fire
- "lib/base64: add generic encoder/decoder, migrate users" (Kuan-Wei Chiu)
adds a general base64 encoder/decoder to lib/ and migrates several
users away from their private implementations
- "rbree: inline rb_first() and rb_last()" (Eric Dumazet)
makes TCP a little faster
- "liveupdate: Rework KHO for in-kernel users" (Pasha Tatashin)
reworks the KEXEC Handover interfaces in preparation for Live Update
Orchestrator (LUO), and possibly for other future clients
- "kho: simplify state machine and enable dynamic updates" (Pasha Tatashin)
increases the flexibility of KEXEC Handover. Also preparation for LUO
- "Live Update Orchestrator" (Pasha Tatashin)
is a major new feature targeted at cloud environments. Quoting the
cover letter:
This series introduces the Live Update Orchestrator, a kernel
subsystem designed to facilitate live kernel updates using a
kexec-based reboot. This capability is critical for cloud
environments, allowing hypervisors to be updated with minimal
downtime for running virtual machines. LUO achieves this by
preserving the state of selected resources, such as memory,
devices and their dependencies, across the kernel transition.
As a key feature, this series includes support for preserving
memfd file descriptors, which allows critical in-memory data, such
as guest RAM or any other large memory region, to be maintained in
RAM across the kexec reboot.
Mike Rappaport merits a mention here, for his extensive review and
testing work.
- "kexec: reorganize kexec and kdump sysfs" (Sourabh Jain)
moves the kexec and kdump sysfs entries from /sys/kernel/ to
/sys/kernel/kexec/ and adds back-compatibility symlinks which can
hopefully be removed one day
- "kho: fixes for vmalloc restoration" (Mike Rapoport)
fixes a BUG which was being hit during KHO restoration of vmalloc()
regions
* tag 'mm-nonmm-stable-2025-12-06-11-14' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (139 commits)
calibrate: update header inclusion
Reinstate "resource: avoid unnecessary lookups in find_next_iomem_res()"
vmcoreinfo: track and log recoverable hardware errors
kho: fix restoring of contiguous ranges of order-0 pages
kho: kho_restore_vmalloc: fix initialization of pages array
MAINTAINERS: TPM DEVICE DRIVER: update the W-tag
init: replace simple_strtoul with kstrtoul to improve lpj_setup
KHO: fix boot failure due to kmemleak access to non-PRESENT pages
Documentation/ABI: new kexec and kdump sysfs interface
Documentation/ABI: mark old kexec sysfs deprecated
kexec: move sysfs entries to /sys/kernel/kexec
test_kho: always print restore status
kho: free chunks using free_page() instead of kfree()
selftests/liveupdate: add kexec test for multiple and empty sessions
selftests/liveupdate: add simple kexec-based selftest for LUO
selftests/liveupdate: add userspace API selftests
docs: add documentation for memfd preservation via LUO
mm: memfd_luo: allow preserving memfd
liveupdate: luo_file: add private argument to store runtime state
mm: shmem: export some functions to internal.h
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC defconfig updates from Arnd Bergmann:
"As usual, a number of newly added drivers get enabled in the arm64
defconfig, in addition to minor housekeeping work on defconfig files
for arm32, arm64 and riscv"
* tag 'soc-defconfig-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (24 commits)
arm64: defconfig: enable Exynos ACPM clocks
arm64: defconfig: Remove the redundant SCHED_MC/SCHED_SMT
ARM: multi_v7_defconfig: Enable TI PRU Ethernet driver
arm64: defconfig: enable i.MX AIPSTZ driver
ARM: mxs_defconfig: enable sound drivers for imx28-amarula-rmm
arm64: defconfig: Enable i.MX95 drivers for pinctrl, Ethernet and PCIe
arm64: defconfig: enable rockchip camera interface
ARM: tegra: Enable EXT4 for Tegra
arm64: defconfig: Enable NVIDIA VRS PSEQ RTC
arm64: defconfig: Enable SX150x GPIO expander driver
riscv: defconfig: enable SPI_FSL_QUADSPI as a module
ARM: at91: at91_dt_defconfig: set MMC_SPI to module
arm64: defconfig: Build NSS clock controller driver for IPQ5424
arm64: defconfig: Enable SCSI UFS Crypto and Block Inline encryption drivers
arm64: defconfig: Add M31 eUSB2 PHY config
arm64: defconfig: Enable configs for Fairphone 3, 4, 5 smartphones
arm64: defconfig: Enable two Novatek display panels for MTP8750 and Tianma
arm64: defconfig: Enable RZ/T2H / RZ/N2H ADC driver
ARM: shmobile: defconfig: Refresh for v6.18-rc1
arm64: defconfig: Enable DW HDMI QP CEC support
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"API:
- Rewrite memcpy_sglist from scratch
- Add on-stack AEAD request allocation
- Fix partial block processing in ahash
Algorithms:
- Remove ansi_cprng
- Remove tcrypt tests for poly1305
- Fix EINPROGRESS processing in authenc
- Fix double-free in zstd
Drivers:
- Use drbg ctr helper when reseeding xilinx-trng
- Add support for PCI device 0x115A to ccp
- Add support of paes in caam
- Add support for aes-xts in dthev2
Others:
- Use likely in rhashtable lookup
- Fix lockdep false-positive in padata by removing a helper"
* tag 'v6.19-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (71 commits)
crypto: zstd - fix double-free in per-CPU stream cleanup
crypto: ahash - Zero positive err value in ahash_update_finish
crypto: ahash - Fix crypto_ahash_import with partial block data
crypto: lib/mpi - use min() instead of min_t()
crypto: ccp - use min() instead of min_t()
hwrng: core - use min3() instead of nested min_t()
crypto: aesni - ctr_crypt() use min() instead of min_t()
crypto: drbg - Delete unused ctx from struct sdesc
crypto: testmgr - Add missing DES weak and semi-weak key tests
Revert "crypto: scatterwalk - Move skcipher walk and use it for memcpy_sglist"
crypto: scatterwalk - Fix memcpy_sglist() to always succeed
crypto: iaa - Request to add Kanchana P Sridhar to Maintainers.
crypto: tcrypt - Remove unused poly1305 support
crypto: ansi_cprng - Remove unused ansi_cprng algorithm
crypto: asymmetric_keys - fix uninitialized pointers with free attribute
KEYS: Avoid -Wflex-array-member-not-at-end warning
crypto: ccree - Correctly handle return of sg_nents_for_len
crypto: starfive - Correctly handle return of sg_nents_for_len
crypto: iaa - Fix incorrect return value in save_iaa_wq()
crypto: zstd - Remove unnecessary size_t cast
...
|
|
Remove ansi_cprng, since it's obsolete and unused, as confirmed at
https://lore.kernel.org/r/aQxpnckYMgAAOLpZ@gondor.apana.org.au/
This was originally added in 2008, apparently as a FIPS approved random
number generator. Whether this has ever belonged upstream is
questionable. Either way, ansi_cprng is no longer usable for this
purpose, since it's been superseded by the more modern algorithms in
crypto/drbg.c, and FIPS itself no longer allows it. (NIST SP 800-131A
Rev 1 (2015) says that RNGs based on ANSI X9.31 will be disallowed after
2015. NIST SP 800-131A Rev 2 (2019) confirms they are now disallowed.)
Therefore, there is no reason to keep it around.
Suggested-by: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Haotian Zhang <vulab@iscas.ac.cn>
Cc: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap into soc/defconfig
multi_v7_defconfig: Enable TI PRU Ethernet driver
* tag 'omap-for-v6.19/defconfig-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap:
ARM: multi_v7_defconfig: Enable TI PRU Ethernet driver
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into soc/defconfig
Microchip AT91 defconfig updates for v6.19
This update includes:
- CONFIG_MMC_SPI is set to module for at91_dt_defconfig
* tag 'at91-defconfig-6.19' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: at91: at91_dt_defconfig: set MMC_SPI to module
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/defconfig
i.MX defconfig changes for 6.19:
- Enable sound drivers for imx28-amarula-rmm in mxs_defconfig
- Enable i.MX AIPSTZ driver, i.MX95 pinctrl driver, Ethernet and PCIe
support in arm64 defconfig
* tag 'imx-defconfig-6.19' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: defconfig: enable i.MX AIPSTZ driver
ARM: mxs_defconfig: enable sound drivers for imx28-amarula-rmm
arm64: defconfig: Enable i.MX95 drivers for pinctrl, Ethernet and PCIe
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/defconfig
ARM: tegra: Default configuration changes for v6.19-rc1
Enable ext4 by default on Tegra to restore systems booting from MMC.
* tag 'tegra-for-6.19-arm-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
ARM: tegra: Enable EXT4 for Tegra
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/defconfig
Renesas ARM defconfig updates for v6.19
- Enable support for the Renesas RZ/G3S and RZ/G3E thermal drivers,
and the RZ/T2H and RZ/N2H ADC drivers in the ARM64 defconfig,
- Refresh the ARM SH-Mobile defconfig for v6.18-rc1.
* tag 'renesas-arm-defconfig-for-v6.19-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
arm64: defconfig: Enable RZ/T2H / RZ/N2H ADC driver
ARM: shmobile: defconfig: Refresh for v6.18-rc1
arm64: defconfig: Enable the Renesas RZ/G3E thermal driver
arm64: defconfig: Enable Renesas RZ/G3S thermal driver
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
In 3.7, 8250 was unintentionally renamed to 8250_core. This happened in
the commit 835d844d1a28 (8250_pnp: do pnp probe before legacy probe).
This made 8250.<xxxx> module options effectively defunct. Instead,
8250_core.<xxxx> worked.
In 3.9, the commit f2b8dfd9e480 (serial: 8250: Keep 8250.<xxxx> module
options functional after driver rename) made the original options work
again by introducing a hack.
Later in 3.9, the commit 9196d8acd7f9 (TTY: 8250, revert module name
change) changed the module name back to 8250 (from 8250_core). Since
then, the hack was there to support the transient 8250_core.<xxxx>
options. Those were present only in the 3.7..3.9 range.
These transient options were deprecated by 9326b047e4fd (TTY: 8250,
deprecated 8250_core.* options) in v3.9 too.
Now, after those 12 years, it is time to get rid of this hack
completely.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Link: https://patch.msgid.link/20251119092457.826789-4-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The Programmable Real-time Unit and Industrial Communication Subsystem
Megabit (ICSSM) is a microcontroller subsystem in TI SoCs such as
AM57x, AM437x, and AM335x. It provides real-time processing
capabilities for industrial communication and custom peripheral interfaces.
Currently, EVMs based on AM57x, AM437x, and AM335x use the ICSSM driver
for PRU-based Ethernet functionality.
This patch enables TI_PRUSS and TI_PRUETH as a module for TI SoCs.
Signed-off-by: Parvathi Pudi <parvathi@couthit.com>
Link: https://lore.kernel.org/r/20251103125451.1679404-1-parvathi@couthit.com
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
|
|
Enable TLV320AIC3X I2C codec and simple-card support used on Amarula
rmm board.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
After commit d6ace46c82fd ("ext4: remove obsolete EXT3 config options")
was added, when using the 'tegra_defconfig' kernel configuration,
mounting an MMC device on Tegra20, Tegra30 and Tegra124 boards is
failing with "unknown filesystem type 'ext4'". Fix this by updating the
'tegra_defconfig' to use the EXT4 config options and remove the
obselete EXT2/3 options.
Fixes: d6ace46c82fd ("ext4: remove obsolete EXT3 config options")
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
The hung_task_panic sysctl is currently a blunt instrument: it's all or
nothing.
Panicking on a single hung task can be an overreaction to a transient
glitch. A more reliable indicator of a systemic problem is when
multiple tasks hang simultaneously.
Extend hung_task_panic to accept an integer threshold, allowing the
kernel to panic only when N hung tasks are detected in a single scan.
This provides finer control to distinguish between isolated incidents
and system-wide failures.
The accepted values are:
- 0: Don't panic (unchanged)
- 1: Panic on the first hung task (unchanged)
- N > 1: Panic after N hung tasks are detected in a single scan
The original behavior is preserved for values 0 and 1, maintaining full
backward compatibility.
[lance.yang@linux.dev: new changelog]
Link: https://lkml.kernel.org/r/20251015063615.2632-1-lirongqing@baidu.com
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Lance Yang <lance.yang@linux.dev>
Tested-by: Lance Yang <lance.yang@linux.dev>
Acked-by: Andrew Jeffery <andrew@codeconstruct.com.au> [aspeed_g5_defconfig]
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: David Hildenbrand <david@redhat.com>
Cc: Florian Wesphal <fw@strlen.de>
Cc: Jakub Kacinski <kuba@kernel.org>
Cc: Jason A. Donenfeld <jason@zx2c4.com>
Cc: Joel Granados <joel.granados@kernel.org>
Cc: Joel Stanley <joel@jms.id.au>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kees Cook <kees@kernel.org>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: "Paul E . McKenney" <paulmck@kernel.org>
Cc: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Phil Auld <pauld@redhat.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Simon Horman <horms@kernel.org>
Cc: Stanislav Fomichev <sdf@fomichev.me>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Change CONFIG_MMC_SPI from built-in to module in the
at91_dt_defconfig. This allows the MMC over SPI driver to
be loaded only when needed for WILC subsystem.
Signed-off-by: Manikandan Muralidharan <manikandan.m@microchip.com>
Link: https://lore.kernel.org/r/20250923094552.430595-1-manikandan.m@microchip.com
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
|
|
Refresh the defconfig for Renesas ARM systems:
- Drop CONFIG_SCHED_MC=y (auto-enabled since commit 7bd291abe2da09f5
("sched: Unify the SCHED_{SMT,CLUSTER,MC} Kconfig")),
- Disable CONFIG_SCHED_SMT (auto-enabled since commit 7bd291abe2da09f5
("sched: Unify the SCHED_{SMT,CLUSTER,MC} Kconfig")),
- Restore CONFIG_ARM_GT_INITIAL_PRESCALER_VAL=1 (default changed to
zero (auto-detect) in commit 1c4b87c921fb158d
("clocksource/drivers/arm_global_timer: Add auto-detection for
initial prescaler values")),
- Disable CONFIG_RPCSEC_GSS_KRB5 (auto-enabled since commit
d8e97cc476e33037 ("SUNRPC: Make RPCSEC_GSS_KRB5 select CRYPTO
instead of depending on it")).
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/d0fcc82fb294021bf96f8a490234165e15aadb43.1760530468.git.geert+renesas@glider.be
|
|
Inspired by commit c065b6046b34 ("Use CONFIG_EXT4_FS instead of
CONFIG_EXT3_FS in all of the defconfigs") I looked around for any other
left-over EXT3 config options, and found some old defconfig files still
mentioned CONFIG_EXT3_DEFAULTS_TO_ORDERED.
That config option was removed a decade ago in commit c290ea01abb7 ("fs:
Remove ext3 filesystem driver"). It had a good run, but let's remove it
for good.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 bug fixes from Ted Ts'o:
- Fix regression caused by removing CONFIG_EXT3_FS when testing some
very old defconfigs
- Avoid a BUG_ON when opening a file on a maliciously corrupted file
system
- Avoid mm warnings when freeing a very large orphan file metadata
- Avoid a theoretical races between metadata writeback and checkpoints
(it's very hard to hit in practice, since the race requires that the
writeback take a very long time)
* tag 'ext4_for_linus-6.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
Use CONFIG_EXT4_FS instead of CONFIG_EXT3_FS in all of the defconfigs
ext4: free orphan info with kvfree
ext4: detect invalid INLINE_DATA + EXTENTS flag combination
ext4, doc: fix and improve directory hash tree description
ext4: wait for ongoing I/O to complete before freeing blocks
jbd2: ensure that all ongoing I/O complete before freeing blocks
|
|
Commit d6ace46c82fd ("ext4: remove obsolete EXT3 config options")
removed the obsolete EXT3_CONFIG options, since it had been over a
decade since fs/ext3 had been removed. Unfortunately, there were a
number of defconfigs that still used CONFIG_EXT3_FS which the cleanup
commit didn't fix up. This led to a large number of defconfig test
builds to fail. Oops.
Fixes: d6ace46c82fd ("ext4: remove obsolete EXT3 config options")
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC defconfig updates from Arnd Bergmann:
"Only a small set up updates, enabling a few drivers for Artpec, THead,
Renesas and Broadcom chips, and cleaning out some Qualcomm options
that were removed previously"
* tag 'soc-defconfig-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
ARM: configs: u8500: Set NFC_SHDLC as built-in
riscv: defconfig: Enable MMP_PDMA support for SpacemiT K1 SoC
riscv: defconfig: run savedefconfig to reorder it
ARM: defconfig: Remove obsolete CONFIG_USB_EHCI_MSM
arm64: defconfig: Enable Marvell WiFi-Ex USB driver
arm64: defconfig: Enable BCM2712 on-chip pin controller driver
arm64: defconfig: Enable Axis ARTPEC SoC
ARM: s3c6400_defconfig: Drop MTD_NAND_S3C2410
ARM: defconfig: pxa: Remove duplicate CONFIG_USB_GPIO_VBUS entry
ARM: defconfig: cleanup orphaned CONFIGs
arm64: defconfig: enable i.MX91 pinctrl
arm64: defconfig: Enable X1P42100 GPUCC driver
arm64: defconfig: Enable QCS615 clock controllers
arm64: defconfig: Enable the RZ/V2H(P) RSPI driver
arm64: defconfig: Enable Renesas RZ/T2H serial SCI
|
|
The CONFIG_NFC_SHDLC=m setting in u8500_defconfig causes a Kconfig
warning because the NFC_SHDLC symbol does not support being built
as a module.
Change the selection from 'm' to 'y' to build the driver in-kernel.
Fixes: 344cad0660ea0 ("ARM: configs: Update U8500 defconfig")
Signed-off-by: Jihed Chaibi <jihed.chaibi.dev@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250930122709.28987-1-linus.walleij@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/defconfig
Qualcomm Arm32 defconfig updates for v6.18
Remove a bunch of orphaned options from the defconfigs.
* tag 'qcom-arm32-defconfig-for-6.18' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
ARM: defconfig: Remove obsolete CONFIG_USB_EHCI_MSM
ARM: defconfig: cleanup orphaned CONFIGs
Link: https://lore.kernel.org/r/20250921020746.596400-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/defconfig
Samsung SoC defconfig changes for v6.18
1. Cleanup MTD_NAND_S3C2410, being removed from the kernel via separate
tree.
2. Enable Axis ARTPEC SoC in arm64 defconfig - new Samsung subarch.
* tag 'samsung-defconfig-6.18' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
arm64: defconfig: Enable Axis ARTPEC SoC
ARM: s3c6400_defconfig: Drop MTD_NAND_S3C2410
Link: https://lore.kernel.org/r/20250909180127.99783-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
CONFIG_USB_EHCI_MSM was removed long time ago in v4.14-rc6
8b3f863033f9f ("usb: host: remove ehci-msm.c").
Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250829165031.110850-1-petr.vorel@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
MTD_NAND_S3C2410 driver was removed from the kernel, so cleanup
defconfig as well.
Link: https://lore.kernel.org/r/20250830-s3c-cleanup-nand-v1-4-05b99ef990fe@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
The pxa_defconfig file defines CONFIG_USB_GPIO_VBUS twice, first as
built-in ('y') and then as a module ('m'). The kconfig system correctly
uses the last definition, but the duplication is confusing.
Remove the obsolete configuration to resolve the ambiguity and clean
up the configuration.
Fixes: 2002f3968714 ("ARM: refresh defconfig files")
Signed-off-by: Jihed Chaibi <jihed.chaibi.dev@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Since v6.15, CRYPTO_CHACHA20_NEON is a hidden option and is selected
automatically. Therefore, assigning a value to it in a defconfig no
longer has any effect. Remove it from all files that did this.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250827151131.27733-2-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
Drop CONFIG_ARCH_MSM8X60 and CONFIG_ARCH_MSM8960 which were removed in
commit 99497df59427 ("ARM: qcom: merge remaining subplatforms into sensible
Kconfig entry").
Drop CONFIG_ARCH_MSM8916 and CONFIG_ARCH_MSM8974 which were removed in
commit 85148df36835 ("ARM: qcom: drop most of 32-bit ARCH_QCOM subtypes").
Signed-off-by: Trevor Woerner <twoerner@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250819231652.15938-1-twoerner@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull more sound updates from Takashi Iwai:
"For catching up the remaining stuff for 6.17: only small updates and
the rest are mostly small fixes.
- Fixes in HD-audio codec driver Kconfig, so that configurations can
be more easily/safely carried between different versions
- Fixes in ASoC SDCA, FSL xcvr, AW88399
- ASoC IMX WM8524 support
- HD-audio and USB-audio quirks and fixes
- A minor selftest fix"
* tag 'sound-6.17-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (21 commits)
ALSA: usb: scarlett2: Fix missing NULL check
mips: Update HD-audio configs again
LoongArch: Update HD-audio codec configs
arm: Update HD-audio configs again
selftests: ALSA: fix memory leak in utimer test
ALSA: usb-audio: Add DSD support for Comtrue USB Audio device
ALSA: hda/hdmi: Enable drivers as default
ALSA: hda/cirrus: Enable drivers as default
ALSA: hda/realtek: Enable drivers as default
ALSA: hda/realtek - Fix mute LED for HP Victus 16-d1xxx (MB 8A26)
ALSA: hda/realtek - Fix mute LED for HP Victus 16-s0xxx
ALSA: hda: Fix the wrong register was used for DVC of TAS2770
ALSA: scarlett2: Add retry on -EPROTO from scarlett2_usb_tx()
ALSA: hda/realtek - Fix mute LED for HP Victus 16-r1xxx
ASoC: codecs: Add acpi_match_table for aw88399 driver
ASoC: dt-bindings: atmel,at91-ssc: add microchip,sam9x7-ssc
ASoC: imx-card: Add WM8524 support
ASoC: fsl_xcvr: get channel status data with firmware exists
ASoC: fsl_xcvr: get channel status data when PHY is not exists
ASoC: SDCA: Add support for -cn- value properties
...
|
|
The Realtek and HDMI HD-audio codec configs have been slightly updated
again since the previous change. Follow the new kconfig changes for
multi_v7_defconfig and tegra_defconfig, and add a few other configs
for HDMI codecs, too.
Fixes: 1d8dd982c409 ("ALSA: hda/realtek: Enable drivers as default")
Fixes: 81231ad173d8 ("ALSA: hda/hdmi: Enable drivers as default")
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-tegra@vger.kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250731091109.16901-2-tiwai@suse.de
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Wrap datapath globals into net_aligned_data, to avoid false sharing
- Preserve MSG_ZEROCOPY in forwarding (e.g. out of a container)
- Add SO_INQ and SCM_INQ support to AF_UNIX
- Add SIOCINQ support to AF_VSOCK
- Add TCP_MAXSEG sockopt to MPTCP
- Add IPv6 force_forwarding sysctl to enable forwarding per interface
- Make TCP validation of whether packet fully fits in the receive
window and the rcv_buf more strict. With increased use of HW
aggregation a single "packet" can be multiple 100s of kB
- Add MSG_MORE flag to optimize large TCP transmissions via sockmap,
improves latency up to 33% for sockmap users
- Convert TCP send queue handling from tasklet to BH workque
- Improve BPF iteration over TCP sockets to see each socket exactly
once
- Remove obsolete and unused TCP RFC3517/RFC6675 loss recovery code
- Support enabling kernel threads for NAPI processing on per-NAPI
instance basis rather than a whole device. Fully stop the kernel
NAPI thread when threaded NAPI gets disabled. Previously thread
would stick around until ifdown due to tricky synchronization
- Allow multicast routing to take effect on locally-generated packets
- Add output interface argument for End.X in segment routing
- MCTP: add support for gateway routing, improve bind() handling
- Don't require rtnl_lock when fetching an IPv6 neighbor over Netlink
- Add a new neighbor flag ("extern_valid"), which cedes refresh
responsibilities to userspace. This is needed for EVPN multi-homing
where a neighbor entry for a multi-homed host needs to be synced
across all the VTEPs among which the host is multi-homed
- Support NUD_PERMANENT for proxy neighbor entries
- Add a new queuing discipline for IETF RFC9332 DualQ Coupled AQM
- Add sequence numbers to netconsole messages. Unregister
netconsole's console when all net targets are removed. Code
refactoring. Add a number of selftests
- Align IPSec inbound SA lookup to RFC 4301. Only SPI and protocol
should be used for an inbound SA lookup
- Support inspecting ref_tracker state via DebugFS
- Don't force bonding advertisement frames tx to ~333 ms boundaries.
Add broadcast_neighbor option to send ARP/ND on all bonded links
- Allow providing upcall pid for the 'execute' command in openvswitch
- Remove DCCP support from Netfilter's conntrack
- Disallow multiple packet duplications in the queuing layer
- Prevent use of deprecated iptables code on PREEMPT_RT
Driver API:
- Support RSS and hashing configuration over ethtool Netlink
- Add dedicated ethtool callbacks for getting and setting hashing
fields
- Add support for power budget evaluation strategy in PSE /
Power-over-Ethernet. Generate Netlink events for overcurrent etc
- Support DPLL phase offset monitoring across all device inputs.
Support providing clock reference and SYNC over separate DPLL
inputs
- Support traffic classes in devlink rate API for bandwidth
management
- Remove rtnl_lock dependency from UDP tunnel port configuration
Device drivers:
- Add a new Broadcom driver for 800G Ethernet (bnge)
- Add a standalone driver for Microchip ZL3073x DPLL
- Remove IBM's NETIUCV device driver
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- support zero-copy Tx of DMABUF memory
- take page size into account for page pool recycling rings
- Intel (100G, ice, idpf):
- idpf: XDP and AF_XDP support preparations
- idpf: add flow steering
- add link_down_events statistic
- clean up the TSPLL code
- preparations for live VM migration
- nVidia/Mellanox:
- support zero-copy Rx/Tx interfaces (DMABUF and io_uring)
- optimize context memory usage for matchers
- expose serial numbers in devlink info
- support PCIe congestion metrics
- Meta (fbnic):
- add 25G, 50G, and 100G link modes to phylink
- support dumping FW logs
- Marvell/Cavium:
- support for CN20K generation of the Octeon chips
- Amazon:
- add HW clock (without timestamping, just hypervisor time access)
- Ethernet virtual:
- VirtIO net:
- support segmentation of UDP-tunnel-encapsulated packets
- Google (gve):
- support packet timestamping and clock synchronization
- Microsoft vNIC:
- add handler for device-originated servicing events
- allow dynamic MSI-X vector allocation
- support Tx bandwidth clamping
- Ethernet NICs consumer, and embedded:
- AMD:
- amd-xgbe: hardware timestamping and PTP clock support
- Broadcom integrated MACs (bcmgenet, bcmasp):
- use napi_complete_done() return value to support NAPI polling
- add support for re-starting auto-negotiation
- Broadcom switches (b53):
- support BCM5325 switches
- add bcm63xx EPHY power control
- Synopsys (stmmac):
- lots of code refactoring and cleanups
- TI:
- icssg-prueth: read firmware-names from device tree
- icssg: PRP offload support
- Microchip:
- lan78xx: convert to PHYLINK for improved PHY and MAC management
- ksz: add KSZ8463 switch support
- Intel:
- support similar queue priority scheme in multi-queue and
time-sensitive networking (taprio)
- support packet pre-emption in both
- RealTek (r8169):
- enable EEE at 5Gbps on RTL8126
- Airoha:
- add PPPoE offload support
- MDIO bus controller for Airoha AN7583
- Ethernet PHYs:
- support for the IPQ5018 internal GE PHY
- micrel KSZ9477 switch-integrated PHYs:
- add MDI/MDI-X control support
- add RX error counters
- add cable test support
- add Signal Quality Indicator (SQI) reporting
- dp83tg720: improve reset handling and reduce link recovery time
- support bcm54811 (and its MII-Lite interface type)
- air_en8811h: support resume/suspend
- support PHY counters for QCA807x and QCA808x
- support WoL for QCA807x
- CAN drivers:
- rcar_canfd: support for Transceiver Delay Compensation
- kvaser: report FW versions via devlink dev info
- WiFi:
- extended regulatory info support (6 GHz)
- add statistics and beacon monitor for Multi-Link Operation (MLO)
- support S1G aggregation, improve S1G support
- add Radio Measurement action fields
- support per-radio RTS threshold
- some work around how FIPS affects wifi, which was wrong (RC4 is
used by TKIP, not only WEP)
- improvements for unsolicited probe response handling
- WiFi drivers:
- RealTek (rtw88):
- IBSS mode for SDIO devices
- RealTek (rtw89):
- BT coexistence for MLO/WiFi7
- concurrent station + P2P support
- support for USB devices RTL8851BU/RTL8852BU
- Intel (iwlwifi):
- use embedded PNVM in (to be released) FW images to fix
compatibility issues
- many cleanups (unused FW APIs, PCIe code, WoWLAN)
- some FIPS interoperability
- MediaTek (mt76):
- firmware recovery improvements
- more MLO work
- Qualcomm/Atheros (ath12k):
- fix scan on multi-radio devices
- more EHT/Wi-Fi 7 features
- encapsulation/decapsulation offload
- Broadcom (brcm80211):
- support SDIO 43751 device
- Bluetooth:
- hci_event: add support for handling LE BIG Sync Lost event
- ISO: add socket option to report packet seqnum via CMSG
- ISO: support SCM_TIMESTAMPING for ISO TS
- Bluetooth drivers:
- intel_pcie: support Function Level Reset
- nxpuart: add support for 4M baudrate
- nxpuart: implement powerup sequence, reset, FW dump, and FW loading"
* tag 'net-next-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1742 commits)
dpll: zl3073x: Fix build failure
selftests: bpf: fix legacy netfilter options
ipv6: annotate data-races around rt->fib6_nsiblings
ipv6: fix possible infinite loop in fib6_info_uses_dev()
ipv6: prevent infinite loop in rt6_nlmsg_size()
ipv6: add a retry logic in net6_rt_notify()
vrf: Drop existing dst reference in vrf_ip6_input_dst
net/sched: taprio: align entry index attr validation with mqprio
net: fsl_pq_mdio: use dev_err_probe
selftests: rtnetlink.sh: remove esp4_offload after test
vsock: remove unnecessary null check in vsock_getname()
igb: xsk: solve negative overflow of nb_pkts in zerocopy mode
stmmac: xsk: fix negative overflow of budget in zerocopy mode
dt-bindings: ieee802154: Convert at86rf230.txt yaml format
net: dsa: microchip: Disable PTP function of KSZ8463
net: dsa: microchip: Setup fiber ports for KSZ8463
net: dsa: microchip: Write switch MAC address differently for KSZ8463
net: dsa: microchip: Use different registers for KSZ8463
net: dsa: microchip: Add KSZ8463 switch support to KSZ DSA driver
dt-bindings: net: dsa: microchip: Add KSZ8463 switch support
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC defconfig updates from Arnd Bergmann:
"As usual, more drivers get enabled in the defconfigs, to support newly
added hardware drivers.
There is one change for Tegra that modifies the Kconfig file at the
same time, and the NXP arm32 defconfigs get a refresh"
* tag 'soc-defconfig-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (25 commits)
arm: multi_v7_defconfig: Enable TPS65219 regulator
arm: omap2plus_defconfig: Enable TPS65219 regulator
arm64: defconfig: Enable Tegra241 and Tegra264
riscv: defconfig: spacemit: enable sdhci driver for K1 SoC
riscv: defconfig: Enable PWM support for SpacemiT K1 SoC
riscv: defconfig: Remove CONFIG_SND_SOC_STARFIVE=m
arm64: defconfig: Enable Tegra HSP and BPMP
ARM: imx_v6_v7_defconfig: select CONFIG_USB_HSIC_USB3503
ARM: imx_v6_v7_defconfig: select CONFIG_INPUT_PWM_BEEPER
ARM: imx_v6_v7_defconfig: cleanup with savedefconfig
ARM: mxs_defconfig: select new drivers used by imx28-amarula-rmm
ARM: mxs_defconfig: Cleanup mxs_defconfig
arm64: defconfig: enable further Rockchip platform drivers
arm64: defconfig: enable Samsung PMIC over ACPM
arm64: defconfig: enable Maxim max77759 driver
ARM: configs: sama5_defconfig: Select CONFIG_WILC1000_SDIO
ARM: shmobile: defconfig: Refresh for v6.16-rc2
arm64: defconfig: Enable RZ/V2H(P) USB2 PHY controller reset driver
arm64: defconfig: add S32G RTC module support
arm64: defconfig: Drop unneeded unselectable sound drivers
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"This includes lots of file shuffling due to HD-audio code
reorganization and many trivial changes, but otherwise there shouldn't
be much surprise from the functionality POV. The PR includes the PM
changes as prerequisite, too. Some highlights below:
Core:
- Performance optimizations in PCM core code
- Refactoring of ASoC Kconfig menus to be hopefully more consistant
and easier to navigate.
- Refactoring of ASoC DAPM code, mainly hiding functionality that
doesn't need to be exposed to drivers
HD-audio reorganization:
- All code are moved under sound/hda with a bit more understandable
tree structure, as well as file renames
- The huge Realtek driver code is split to several parts, a common
helper module with driver modules per probe entry
- HDMI and Cirrus codec drivers also split
ASoC:
- Further work on the generic handling for SoundWire SDCA devices
- Support for AMD ACP7.2 and SoundWire on ACP 7.1, Fairphone 4 & 5,
various Intel systems, Qualcomm QCS8275, Richtek RTQ9124 and TI
TAS5753
HD-audio and USB-audio:
- TAS2781 driver cleanup and TAS2770 support
- EQ enablement in CA0132 driver
- USB audio quirk code cleanups
Others:
- Cleanups of PM autosuspend call patterns with the update from the
PM tree
- Lots of strcpy() -> strscpy() conversions for fixed size arrays"
* tag 'sound-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (385 commits)
ALSA: hda: Add TAS2770 support
ASoC: qcom: sm8250: Add Fairphone 4 soundcard compatible
ASoC: dt-bindings: qcom,sm8250: Add Fairphone 4 sound card
ASoC: dt-bindings: qcom,q6afe: Document q6usb subnode
ASoC: SDCA: Fix implicit cast from le16
ASoC: SDCA: Shrink detected_mode_handler() stack frame
ASoC: SDCA: Check devm_mutex_init() return value
ASoC: SDCA: add route by the number of input pins in MU entity
ALSA: hda/realtek: Add support for ASUS Commercial laptops using CS35L41 HDA
ASoC: Intel: sof_rt5682: Add HDMI-In capture with rt5682 support for PTL.
ASoC: codec: tlv320aic32x4: Fix reset GPIO check
ASoC: dt-bindings: qcom,lpass-va-macro: Define clock-names in top-level
ASoC: SDCA: Add hw_params() helper function
ASoC: SDCA: Add a helper to get the SoundWire port number
ASoC: SDCA: Add helper to add DAI constraints
ASoC: soc-dai: Add private data to snd_soc_dai
ASoC: SDCA: Move SDCA search functions and export
ASoC: SDCA: Remove overly chatty input pin list warning
ASoC: SDCA: Allow read-only controls to be deferrable
ASoC: SDCA: Update memory allocations to zero initialise
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux
Pull crypto library updates from Eric Biggers:
"This is the main crypto library pull request for 6.17. The main focus
this cycle is on reorganizing the SHA-1 and SHA-2 code, providing
high-quality library APIs for SHA-1 and SHA-2 including HMAC support,
and establishing conventions for lib/crypto/ going forward:
- Migrate the SHA-1 and SHA-512 code (and also SHA-384 which shares
most of the SHA-512 code) into lib/crypto/. This includes both the
generic and architecture-optimized code. Greatly simplify how the
architecture-optimized code is integrated. Add an easy-to-use
library API for each SHA variant, including HMAC support. Finally,
reimplement the crypto_shash support on top of the library API.
- Apply the same reorganization to the SHA-256 code (and also SHA-224
which shares most of the SHA-256 code). This is a somewhat smaller
change, due to my earlier work on SHA-256. But this brings in all
the same additional improvements that I made for SHA-1 and SHA-512.
There are also some smaller changes:
- Move the architecture-optimized ChaCha, Poly1305, and BLAKE2s code
from arch/$(SRCARCH)/lib/crypto/ to lib/crypto/$(SRCARCH)/. For
these algorithms it's just a move, not a full reorganization yet.
- Fix the MIPS chacha-core.S to build with the clang assembler.
- Fix the Poly1305 functions to work in all contexts.
- Fix a performance regression in the x86_64 Poly1305 code.
- Clean up the x86_64 SHA-NI optimized SHA-1 assembly code.
Note that since the new organization of the SHA code is much simpler,
the diffstat of this pull request is negative, despite the addition of
new fully-documented library APIs for multiple SHA and HMAC-SHA
variants.
These APIs will allow further simplifications across the kernel as
users start using them instead of the old-school crypto API. (I've
already written a lot of such conversion patches, removing over 1000
more lines of code. But most of those will target 6.18 or later)"
* tag 'libcrypto-updates-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux: (67 commits)
lib/crypto: arm64/sha512-ce: Drop compatibility macros for older binutils
lib/crypto: x86/sha1-ni: Convert to use rounds macros
lib/crypto: x86/sha1-ni: Minor optimizations and cleanup
crypto: sha1 - Remove sha1_base.h
lib/crypto: x86/sha1: Migrate optimized code into library
lib/crypto: sparc/sha1: Migrate optimized code into library
lib/crypto: s390/sha1: Migrate optimized code into library
lib/crypto: powerpc/sha1: Migrate optimized code into library
lib/crypto: mips/sha1: Migrate optimized code into library
lib/crypto: arm64/sha1: Migrate optimized code into library
lib/crypto: arm/sha1: Migrate optimized code into library
crypto: sha1 - Use same state format as legacy drivers
crypto: sha1 - Wrap library and add HMAC support
lib/crypto: sha1: Add HMAC support
lib/crypto: sha1: Add SHA-1 library functions
lib/crypto: sha1: Rename sha1_init() to sha1_init_raw()
crypto: x86/sha1 - Rename conflicting symbol
lib/crypto: sha2: Add hmac_sha*_init_usingrawkey()
lib/crypto: arm/poly1305: Remove unneeded empty weak function
lib/crypto: x86/poly1305: Fix performance regression on short messages
...
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into soc/defconfig
Microchip AT91 defconfig updates for v6.17
This update includes:
- the WILC1000 SDIO module
* tag 'at91-defconfig-6.17' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: configs: sama5_defconfig: Select CONFIG_WILC1000_SDIO
Link: https://lore.kernel.org/r/20250721100904.568575-1-claudiu.beznea@tuxon.dev
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/defconfig
i.MX defconfig changes for 6.17:
- Enable S32G RTC driver as module in arm64 defconfig
- Enable drivers used by imx28-amarula-rmm board in mxs_defconfig
- Enable INPUT_PWM_BEEPER, USB_HSIC_USB3503 and BT_HCIUART_BCM in
imx_v6_v7_defconfig
* tag 'imx-defconfig-6.17' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: imx_v6_v7_defconfig: select CONFIG_USB_HSIC_USB3503
ARM: imx_v6_v7_defconfig: select CONFIG_INPUT_PWM_BEEPER
ARM: imx_v6_v7_defconfig: cleanup with savedefconfig
ARM: mxs_defconfig: select new drivers used by imx28-amarula-rmm
ARM: mxs_defconfig: Cleanup mxs_defconfig
arm64: defconfig: add S32G RTC module support
ARM: imx_v6_v7_defconfig: Select BT_HCIUART_BCM
Link: https://lore.kernel.org/r/20250713055441.221235-5-shawnguo2@yeah.net
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Enable the TPS65219 regulator in the defconfig, as the TPS65214
variant is used by the newly introduced BeagleBoard Green Eco board.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Reviewed-by: Andreas Kemnade <andreas@kemnade.info>
Tested-by: Judith Mendez <jm@ti.com>
Link: https://lore.kernel.org/r/20250620-bbg-v5-5-84f9b9a2e3a8@bootlin.com
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Enable the TPS65219 regulator in the defconfig, as the TPS65214
variant is used by the newly introduced BeagleBoard Green Eco board.
Reviewed-by: Andreas Kemnade <andreas@kemnade.info>
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Tested-by: Judith Mendez <jm@ti.com>
Link: https://lore.kernel.org/r/20250620-bbg-v5-4-84f9b9a2e3a8@bootlin.com
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Since the reorganization of HD-audio drivers, Realtek and HDMI codec
drivers have been split. Update to the new Kconfigs to catch up.
Fixes: aeeb85f26c3b ("ALSA: hda: Split Realtek HD-audio codec driver")
Fixes: 73cd0490819d ("ALSA: hda/hdmi: Split vendor codec drivers")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/20250715170422.5162c666@canb.auug.org.au
Link: https://patch.msgid.link/20250715075237.28476-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Instead of exposing the arm-optimized SHA-1 code via arm-specific
crypto_shash algorithms, instead just implement the sha1_blocks()
library function. This is much simpler, it makes the SHA-1 library
functions be arm-optimized, and it fixes the longstanding issue where
the arm-optimized SHA-1 code was disabled by default. SHA-1 still
remains available through crypto_shash, but individual architectures no
longer need to handle it.
To match sha1_blocks(), change the type of the nblocks parameter of the
assembly functions from int to size_t. The assembly functions actually
already treated it as size_t.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250712232329.818226-8-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
The DCCP socket family has now been removed from this tree, see:
8bb3212be4b4 ("Merge branch 'net-retire-dccp-socket'")
Remove connection tracking and NAT support for this protocol, this
should not pose a problem because no DCCP traffic is expected to be seen
on the wire.
As for the code for matching on dccp header for iptables and nftables,
mark it as deprecated and keep it in place. Ruleset restoration is an
atomic operation. Without dccp matching support, an astray match on dccp
could break this operation leaving your computer with no policy in
place, so let's follow a more conservative approach for matches.
Add CONFIG_NFT_EXTHDR_DCCP which is set to 'n' by default to deprecate
dccp extension support. Similarly, label CONFIG_NETFILTER_XT_MATCH_DCCP
as deprecated too and also set it to 'n' by default.
Code to match on DCCP protocol from ebtables also remains in place, this
is just a few checks on IPPROTO_DCCP from _check() path which is
exercised when ruleset is loaded. There is another use of IPPROTO_DCCP
from the _check() path in the iptables multiport match. Another check
for IPPROTO_DCCP from the packet in the reject target is also removed.
So let's schedule removal of the dccp matching for a second stage, this
should not interfer with the dccp retirement since this is only matching
on the dccp header.
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
The driver is required by the Engicam MicroGEA GTW board.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The driver is required by the Engicam MicroGEA BMM board.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Generate imx_v6_v7_defconfig by doing:
make imx_v6_v7_defconfig
make savedefconfig
cp defconfig arch/arm/configs/imx_v6_v7_defconfig
No functional change. The goal here is to cleanup imx_v6_v7_defconfig
file to make easier and cleaner the addition of new entries.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Select the options required by the imx28-amarula-rmm board.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Generate mxs_defconfig by doing:
make mxs_defconfig
make savedefconfig
cp defconfig arch/arm/configs/mxs_defconfig
No functional change. The goal here is to cleanup mxs_defconfig file to
make easier and cleaner the addition of new entries.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Remove the crc32 and crc32c support from the stm32 driver. Since it's
not wired up to the CRC library, almost no CRC user in the kernel can
actually be taking advantage of it, so it's effectively dead code.
Support for this hardware could be migrated to the CRC library, but
there doesn't seem to be much point. This CRC engine is present only on
a couple older SoCs that lacked CRC instructions.
Even for those SoCs, it probably wouldn't be worthwhile. This driver
has to deal with things like locking and runtime power management that
do not exist in software CRC code and are a source of bugs (as is clear
from the commit log) and add significant overhead to the processing of
short messages, which are common. The patch that added this driver
seemed to justify it based purely on a microbenchmark on Cortex-M7 on
long messages, not a real use case. These days, if this driver were to
be used at all it would likely be on Cortex-A7 instead. This CRC engine
is also not supported by QEMU, making the driver not easily testable.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Fabien Dessenne <fabien.dessenne@foss.st.com>
Cc: Lionel Debieve <lionel.debieve@foss.st.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: linux-stm32@st-md-mailman.stormreply.com
Link: https://lore.kernel.org/r/20250601193441.6913-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
