summaryrefslogtreecommitdiff
path: root/arch/arm/mach-mx6/usb_dr.c
AgeCommit message (Expand)Author
2014-06-03ENGR00272597 mx6-msl: usb: fix building warning when only build host driverPeter Chen
2014-06-03ENGR00272022 msl-mx6: usb: wait PHY clock stable explicitlyPeter Chen
2014-06-03ENGR00262868 msl-mx6: usb: do not enable id wakeup interrupt for non-otgPeter Chen
2014-06-03ENGR00262528-1 mx6-msl: usb: the static variables needs to be initializedPeter Chen
2014-06-03ENGR00261451-3 mx6-msl: usb: add debounce time for otgsc valuePeter Chen
2014-06-03ENGR00258491-4 msl-mx6: usb: fix clock unmatch problem after unload modulePeter Chen
2014-06-03ENGR00258491-2 msl-mx6: usb: put PHY to be out of low power explicitlyPeter Chen
2014-06-03ENGR00257130-6 mx6-msl: usb: Add 500us delay for phy stable timePeter Chen
2014-06-03ENGR00257130-2 msl: usb: Disable auto power PHY if usb wakeup disabledPeter Chen
2014-06-03ENGR00255484-3 msl: usb: add clock deinit at fail pathPeter Chen
2014-06-03ENGR00251209-6 msl-mx6: usb: keep the phy lower flag as true defaultlyPeter Chen
2014-06-03ENGR00251209-4 msl-mx6: usb: Fix system hang when unload gadget modulePeter Chen
2014-06-03ENGR00251209-3 usb: fix below build warningPeter Chen
2014-06-03ENGR00235630 MX6 USB :fix USB does not work when plug in device during suspendmake shi
2014-06-03ENGR00233728 mx6 usb: change usb driver load from arch_initcall to module_initmake shi
2014-06-03ENGR00233051-03 Mx6 USB: msl implementation for USB OTG modulizationmake shi
2014-06-03ENGR00225131-04 MX6 USB: implement platform_phy_power_on for USB otg and h1make shi
2014-06-03ENGR00225131-01 USB: revert ENGR00221317-02 about set stop_mode_config patchmake shi
2014-06-03ENGR00221716-01 Mx6 USB host: set disconnect bit should wait for resume finishedmake shi
2014-06-03ENGR00221317-02 Mx6 USB host: set stop_mode_config when any USB host enabledmake shi
2014-06-03ENGR00218771 mx6 USB:USB disconnect issue verification on MX6QTO1.2/MX6DLTO1.1make shi
2014-06-03ENGR00212232-01 USB:fix otg can not work without phy power if VBUS removedmake shi
2014-06-03ENGR00212322-2 usb: store anatop base address at udc's platform dataPeter Chen
2014-06-03ENGR00211329-2 add mutex for otg wake up enableTony LIU
2014-06-03ENGR00209480-4 mx6sl_usb remove the sw workaround to verify IC fixTony LIU
2014-06-03ENGR00178939 [mx6] usb host, msleep may be called in atomic contextTony LIU
2014-06-03ENGR00177771 usb: usb wakeup enable should include both controller and phyPeter Chen
2014-06-03ENGR00176299-1 usb host suspend/resume can't work randomlyTony LIU
2014-06-03ENGR00176147-2: usb: pass the wakeup event to pdataPeter Chen
2014-06-03ENGR00174734-1 usb: need to discharge both dp and dmPeter Chen
2014-06-03ENGR00174128-2 Revert "Remove the discharge for VBUS and DP-2"Peter Chen
2014-06-03ENGR00173378-1 usb: device: Change judgement condition for resume occurrencePeter Chen
2014-06-03ENGR00171027-1 [USB_HOST]after plug in/out on the hub,host can't workTony LIU
2014-06-03ENGR00169661:Remove the discharge for VBUS and DPTony LIU
2014-06-03ENGR00162583-1 usb msl: avoid class driver access register after usb is offPeter Chen
2014-06-03ENGR00161598 [MX6]OTG driver: load fail issuemake shi
2014-06-03ENGR00161383 [MX6Q] USB OTG: enable OTG drivermake shi
2014-06-03ENGR00152915-1 mx6q-usb: refine usb phy usagePeter Chen
2014-06-03ENGR00152493-1 mx6q: add usb functionPeter Chen
generated by cgit v1.2.3 (git 2.0.4) at 2025-08-09 10:08:04 +0000