| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"There's a small crop of fixes for the MPAM resctrl driver, a fix for
SCS/PAC patching with the AMDGPU driver and a page-table fix for
realms running with 52-bit physical addresses:
- Fix DWARF parsing for SCS/PAC patching to work with very large
modules (such as the amdgpu driver)
- Fixes to the mpam resctrl driver
- Fix broken handling of 52-bit physical addresses when sharing
memory from within a realm"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: realm: Fix PTE_NS_SHARED for 52bit PA support
arm_mpam: Force __iomem casts
arm_mpam: Disable preemption when making accesses to fake MSC in kunit test
arm_mpam: Fix null pointer dereference when restoring bandwidth counters
arm64/scs: Fix handling of advance_loc4
|
|
With LPA/LPA2, the top bits of the PFN (Bits[51:48]) end up in the lower bits
of the PTE. So, simply creating a mask of the "top IPA bit" doesn't work well
for these configurations to set the "top" bit at the output of Stage1
translation.
Fix this by using the __phys_to_pte_val() to do the right thing for all
configurations.
Tested using, kvmtool, placing the memory at a higher address (-m <size>@<Addr>).
e.g:
# lkvm run --realm -c 4 -m 512M@@128T -k Image --console serial
sh-5.0# dmesg | grep "LPA2\|RSI"
[ 0.000000] RME: Using RSI version 1.0
[ 0.000000] CPU features: detected: 52-bit Virtual Addressing (LPA2)
[ 0.777354] CPU features: detected: 52-bit Virtual Addressing for KVM (LPA2)
Fixes: 399306954996 ("arm64: realm: Query IPA size from the RMM")
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Steven Price <steven.price@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux
Pull crypto library fixes from Eric Biggers:
- Disable the "padlock" SHA-1 and SHA-256 driver on Zhaoxin
processors, since it does not compute hash values correctly
- Make a generated file be removed by 'make clean'
- Fix excessive stack usage in some of the arm64 AES code
* tag 'libcrypto-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux:
lib/crypto: powerpc: Add powerpc/aesp8-ppc.S to clean-files
crypto: padlock-sha - Disable for Zhaoxin processor
crypto: arm64/aes-neonbs - Move key expansion off the stack
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC fixes from Arnd Bergmann:
"The firmware drivers for ARM SCMI, FF-A and the Tee subsystem, as
well as the reset controller and cache controller subsystem all see
small bugfixes for reference ounting errors, ABI correctness, and
NULL pointer dereferences.
Similarly, there are multiple reference counting fixes in drivers/soc/
for vendor specific drivers (rockchips, microchip), while the
freescale drivers get a fix for a race condition and error handling.
The devicetree fixes for Rockchips and NXP got held up, so for
the moment there is only Renesas fixing problesm with SD card
initialization, a boot hang on one board and incorrect descriptions
for interrupts and clock registers on some SoCs. The Microchip
polarfire gets a dts fix for a boot time warning.
A defconfig fix avoids a warning about a conflicting assignment"
* tag 'soc-fixes-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (21 commits)
ARM: multi_v7_defconfig: Drop duplicate CONFIG_TI_PRUSS=m
firmware: arm_scmi: Spelling s/mulit/multi/, s/currenly/currently/
firmware: arm_scmi: Fix NULL dereference on notify error path
firmware: arm_scpi: Fix device_node reference leak in probe path
firmware: arm_ffa: Remove vm_id argument in ffa_rxtx_unmap()
arm64: dts: renesas: r8a78000: Fix out-of-range SPI interrupt numbers
arm64: dts: renesas: rzg3s-smarc-som: Set bypass for Versa3 PLL2
arm64: dts: renesas: r9a09g087: Fix CPG register region sizes
arm64: dts: renesas: r9a09g077: Fix CPG register region sizes
arm64: dts: renesas: r9a09g057: Remove wdt{0,2,3} nodes
arm64: dts: renesas: rzv2-evk-cn15-sd: Add ramp delay for SD0 regulator
arm64: dts: renesas: rzt2h-n2h-evk: Add ramp delay for SD0 card regulator
tee: shm: Remove refcounting of kernel pages
reset: rzg2l-usbphy-ctrl: Check pwrrdy is valid before using it
soc: fsl: cpm1: qmc: Fix error check for devm_ioremap_resource() in qmc_qe_init_resources()
soc: fsl: qbman: fix race condition in qman_destroy_fq
soc: rockchip: grf: Add missing of_node_put() when returning
cache: ax45mp: Fix device node reference leak in ax45mp_cache_init()
cache: starfive: fix device node leak in starlink_cache_init()
riscv: dts: microchip: add can resets to mpfs
...
|
|
Pull kvm fixes from Paolo Bonzini:
"Quite a large pull request, partly due to skipping last week and
therefore having material from ~all submaintainers in this one. About
a fourth of it is a new selftest, and a couple more changes are large
in number of files touched (fixing a -Wflex-array-member-not-at-end
compiler warning) or lines changed (reformatting of a table in the API
documentation, thanks rST).
But who am I kidding---it's a lot of commits and there are a lot of
bugs being fixed here, some of them on the nastier side like the
RISC-V ones.
ARM:
- Correctly handle deactivation of interrupts that were activated
from LRs. Since EOIcount only denotes deactivation of interrupts
that are not present in an LR, start EOIcount deactivation walk
*after* the last irq that made it into an LR
- Avoid calling into the stubs to probe for ICH_VTR_EL2.TDS when pKVM
is already enabled -- not only thhis isn't possible (pKVM will
reject the call), but it is also useless: this can only happen for
a CPU that has already booted once, and the capability will not
change
- Fix a couple of low-severity bugs in our S2 fault handling path,
affecting the recently introduced LS64 handling and the even more
esoteric handling of hwpoison in a nested context
- Address yet another syzkaller finding in the vgic initialisation,
where we would end-up destroying an uninitialised vgic with nasty
consequences
- Address an annoying case of pKVM failing to boot when some of the
memblock regions that the host is faulting in are not page-aligned
- Inject some sanity in the NV stage-2 walker by checking the limits
against the advertised PA size, and correctly report the resulting
faults
PPC:
- Fix a PPC e500 build error due to a long-standing wart that was
exposed by the recent conversion to kmalloc_obj(); rip out all the
ugliness that led to the wart
RISC-V:
- Prevent speculative out-of-bounds access using array_index_nospec()
in APLIC interrupt handling, ONE_REG regiser access, AIA CSR
access, float register access, and PMU counter access
- Fix potential use-after-free issues in kvm_riscv_gstage_get_leaf(),
kvm_riscv_aia_aplic_has_attr(), and kvm_riscv_aia_imsic_has_attr()
- Fix potential null pointer dereference in
kvm_riscv_vcpu_aia_rmw_topei()
- Fix off-by-one array access in SBI PMU
- Skip THP support check during dirty logging
- Fix error code returned for Smstateen and Ssaia ONE_REG interface
- Check host Ssaia extension when creating AIA irqchip
x86:
- Fix cases where CPUID mitigation features were incorrectly marked
as available whenever the kernel used scattered feature words for
them
- Validate _all_ GVAs, rather than just the first GVA, when
processing a range of GVAs for Hyper-V's TLB flush hypercalls
- Fix a brown paper bug in add_atomic_switch_msr()
- Use hlist_for_each_entry_srcu() when traversing mask_notifier_list,
to fix a lockdep warning; KVM doesn't hold RCU, just irq_srcu
- Ensure AVIC VMCB fields are initialized if the VM has an in-kernel
local APIC (and AVIC is enabled at the module level)
- Update CR8 write interception when AVIC is (de)activated, to fix a
bug where the guest can run in perpetuity with the CR8 intercept
enabled
- Add a quirk to skip the consistency check on FREEZE_IN_SMM, i.e. to
allow L1 hypervisors to set FREEZE_IN_SMM. This reverts (by
default) an unintentional tightening of userspace ABI in 6.17, and
provides some amount of backwards compatibility with hypervisors
who want to freeze PMCs on VM-Entry
- Validate the VMCS/VMCB on return to a nested guest from SMM,
because either userspace or the guest could stash invalid values in
memory and trigger the processor's consistency checks
Generic:
- Remove a subtle pseudo-overlay of kvm_stats_desc, which, aside from
being unnecessary and confusing, triggered compiler warnings due to
-Wflex-array-member-not-at-end
- Document that vcpu->mutex is take outside of kvm->slots_lock and
kvm->slots_arch_lock, which is intentional and desirable despite
being rather unintuitive
Selftests:
- Increase the maximum number of NUMA nodes in the guest_memfd
selftest to 64 (from 8)"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (43 commits)
KVM: selftests: Verify SEV+ guests can read and write EFER, CR0, CR4, and CR8
Documentation: kvm: fix formatting of the quirks table
KVM: x86: clarify leave_smm() return value
selftests: kvm: add a test that VMX validates controls on RSM
selftests: kvm: extract common functionality out of smm_test.c
KVM: SVM: check validity of VMCB controls when returning from SMM
KVM: VMX: check validity of VMCS controls when returning from SMM
KVM: SVM: Set/clear CR8 write interception when AVIC is (de)activated
KVM: SVM: Initialize AVIC VMCB fields if AVIC is enabled with in-kernel APIC
KVM: x86: Introduce KVM_X86_QUIRK_VMCS12_ALLOW_FREEZE_IN_SMM
KVM: x86: Fix SRCU list traversal in kvm_fire_mask_notifiers()
KVM: VMX: Fix a wrong MSR update in add_atomic_switch_msr()
KVM: x86: hyper-v: Validate all GVAs during PV TLB flush
KVM: x86: synthesize CPUID bits only if CPU capability is set
KVM: PPC: e500: Rip out "struct tlbe_ref"
KVM: PPC: e500: Fix build error due to using kmalloc_obj() with wrong type
KVM: selftests: Increase 'maxnode' for guest_memfd tests
KVM: arm64: pkvm: Don't reprobe for ICH_VTR_EL2.TDS on CPU hotplug
KVM: arm64: vgic: Pick EOIcount deactivations from AP-list tail
KVM: arm64: Remove the redundant ISB in __kvm_at_s1e2()
...
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/fixes
Renesas fixes for v7.0
- Fix SD card initialization on the RZ/T2H and RZ/N2H EVK boards,
- Remove WDT nodes meant for other CPU cores on the RZ/V2H(P) SoC,
- Fix Clock Pulse Generator registers on the RZ/T2H and RZ/N2H SoCs,
- Fix Versa3-related boot hangs on the RZ/G3S SoM,
- Fix Extended SPI interrupts on the R-Car X5H SoC.
* tag 'renesas-fixes-for-v7.0-tag1' of https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
arm64: dts: renesas: r8a78000: Fix out-of-range SPI interrupt numbers
arm64: dts: renesas: rzg3s-smarc-som: Set bypass for Versa3 PLL2
arm64: dts: renesas: r9a09g087: Fix CPG register region sizes
arm64: dts: renesas: r9a09g077: Fix CPG register region sizes
arm64: dts: renesas: r9a09g057: Remove wdt{0,2,3} nodes
arm64: dts: renesas: rzv2-evk-cn15-sd: Add ramp delay for SD0 regulator
arm64: dts: renesas: rzt2h-n2h-evk: Add ramp delay for SD0 card regulator
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
|
|
DW_CFA_advance_loc4 is defined but no handler is implemented. Its
CFA opcode defaults to EDYNSCS_INVALID_CFA_OPCODE triggering an
error which wrongfully prevents modules from loading.
Link: https://bugs.gentoo.org/971060
Signed-off-by: Pepper Gray <hello@peppergray.xyz>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for 7.0, take #3
- Correctly handle deeactivation of out-of-LRs interrupts by
starting the EOIcount deactivation walk *after* the last irq
that made it into an LR. This avoids deactivating irqs that
are in the LRs and that the vcpu hasn't deactivated yet.
- Avoid calling into the stubs to probe for ICH_VTR_EL2.TDS when
pKVM is already enabled -- not only thhis isn't possible (pKVM
will reject the call), but it is also useless: this can only
happen for a CPU that has already booted once, and the capability
will not change.
|
|
HEAD
KVM generic changes for 7.0
- Remove a subtle pseudo-overlay of kvm_stats_desc, which, aside from being
unnecessary and confusing, triggered compiler warnings due to
-Wflex-array-member-not-at-end.
- Document that vcpu->mutex is take outside of kvm->slots_lock and
kvm->slots_arch_lock, which is intentional and desirable despite being
rather unintuitive.
|
|
Hotplugging a CPU off and back on fails with pKVM, as we try to
probe for ICH_VTR_EL2.TDS. In a non-VHE setup, this is achieved
by using an EL2 stub helper. However, the stubs are out of reach
once pKVM has deprivileged the kernel. The CPU never boots.
Since pKVM doesn't allow late onlining of CPUs, we can detect
that protected mode is enforced early on, and return the current
state of the capability.
Fixes: 2a28810cbb8b2 ("KVM: arm64: GICv3: Detect and work around the lack of ICV_DIR_EL1 trapping")
Reported-by: Vincent Donnefort <vdonnefort@google.com>
Tested-by: Vincent Donnefort <vdonnefort@google.com>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://patch.msgid.link/20260310085433.3936742-1-maz@kernel.org
Cc: stable@vger.kernel.org
|
|
aesbs_setkey() and aesbs_cbc_ctr_setkey() allocate struct crypto_aes_ctx
on the stack. On arm64, the kernel-mode NEON context is also stored on
the stack, causing the combined frame size to exceed 1024 bytes and
triggering -Wframe-larger-than= warnings.
Allocate struct crypto_aes_ctx on the heap instead and use
kfree_sensitive() to ensure the key material is zeroed on free.
Use a goto-based cleanup path to ensure kfree_sensitive() is always
called.
Signed-off-by: Cheng-Yang Chou <yphbchou0911@gmail.com>
Fixes: 4fa617cc6851 ("arm64/fpsimd: Allocate kernel mode FP/SIMD buffers on the stack")
Link: https://lore.kernel.org/r/20260306064254.2079274-1-yphbchou0911@gmail.com
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
Valentine reports that their guests fail to boot correctly, losing
interrupts, and indicates that the wrong interrupt gets deactivated.
What happens here is that if the maintenance interrupt is slow enough
to kick us out of the guest, extra interrupts can be activated from
the LRs. We then exit and proceed to handle EOIcount deactivations,
picking active interrupts from the AP list. But we start from the
top of the list, potentially deactivating interrupts that were in
the LRs, while EOIcount only denotes deactivation of interrupts that
are not present in an LR.
Solve this by tracking the last interrupt that made it in the LRs,
and start the EOIcount deactivation walk *after* that interrupt.
Since this only makes sense while the vcpu is loaded, stash this
in the per-CPU host state.
Huge thanks to Valentine for doing all the detective work and
providing an initial patch.
Fixes: 3cfd59f81e0f3 ("KVM: arm64: GICv3: Handle LR overflow when EOImode==0")
Fixes: 281c6c06e2a7b ("KVM: arm64: GICv2: Handle LR overflow when EOImode==0")
Reported-by: Valentine Burley <valentine.burley@collabora.com>
Tested-by: Valentine Burley <valentine.burley@collabora.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20260307115955.369455-1-valentine.burley@collabora.com
Link: https://patch.msgid.link/20260307191151.3781182-1-maz@kernel.org
Cc: stable@vger.kernel.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux
Pull Kbuild fixes from Nathan Chancellor:
- Split out .modinfo section from ELF_DETAILS macro, as that macro may
be used in other areas that expect to discard .modinfo, breaking
certain image layouts
- Adjust genksyms parser to handle optional attributes in certain
declarations, necessary after commit 07919126ecfc ("netfilter:
annotate NAT helper hook pointers with __rcu")
- Include resolve_btfids in external module build created by
scripts/package/install-extmod-build when it may be run on external
modules
- Avoid removing objtool binary with 'make clean', as it is required
for external module builds
* tag 'kbuild-fixes-7.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux:
kbuild: Leave objtool binary around with 'make clean'
kbuild: install-extmod-build: Package resolve_btfids if necessary
genksyms: Fix parsing a declarator with a preceding attribute
kbuild: Split .modinfo out from ELF_DETAILS
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"The main changes are a fix to the way in which we manage the access
flag setting for mappings using the contiguous bit and a fix for a
hang on the kexec/hibernation path.
Summary:
- Fix kexec/hibernation hang due to bogus read-only mappings
- Fix sparse warnings in our cmpxchg() implementation
- Prevent runtime-const being used in modules, just like x86
- Fix broken elision of access flag modifications for contiguous
entries on systems without support for hardware updates
- Fix a broken SVE selftest that was testing the wrong instruction"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
selftest/arm64: Fix sve2p1_sigill() to hwcap test
arm64: contpte: fix set_access_flags() no-op check for SMMU/ATS faults
arm64: make runtime const not usable by modules
arm64: mm: Add PTE_DIRTY back to PAGE_KERNEL* to fix kexec/hibernation
arm64: Silence sparse warnings caused by the type casting in (cmp)xchg
|
|
SPI interrupts are in the range 0-987. Extended SPI interrupts should
use GIC_ESPI, instead of abusing GIC_SPI with a manual offset of 4064.
Fixes: 63500d12cf76d003 ("arm64: dts: renesas: Add R8A78000 SoC support")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/1f9dd274720ea1b66617a5dd84f76c3efc829dc8.1772641415.git.geert+renesas@glider.be
|
|
The default settings for the Versa3 device on the Renesas RZ/G3S SMARC
SoM board have PLL2 disabled. PLL2 was later enabled together with audio
support, as it is required to support both 44.1 kHz and 48 kHz audio.
With PLL2 enabled, it was observed that Linux occasionally either hangs
during boot (the last log message being related to the I2C probe) or
randomly crashes. This was mainly reproducible on cold boots. During
debugging, it was also noticed that the Unicode replacement character (�)
sometimes appears on the serial console. Further investigation traced this
to the configuration applied through the Versa3 register at offset 0x1c,
which controls PLL enablement.
The appearance of the Unicode replacement character suggested an issue
with the SoC reference clock. The RZ/G3S reference clock is provided by
the Versa3 clock generator (REF output).
After checking with the Renesas Versa3 hardware team, it was found that
this is related to the PLL2 lock bit being set through the
renesas,settings DT property.
The PLL lock bit must be set to avoid unstable clock output from the PLL.
However, due to the Versa3 hardware design, when a PLL lock bit is set,
all outputs (including the REF clock) are temporarily disabled until the
configured PLLs become stable.
As an alternative, the bypass bit can be used. This does not interrupt the
PLL2 output or any other Versa3 outputs, but it may result in temporary
instability on PLL2 output while the configuration is applied. Since PLL2
feeds only the audio path and audio is not used during early boot, this is
acceptable and does not affect system boot.
Drop the PLL2 lock bit and set the bypass bit instead.
This has been tested with more than 1000 cold boots.
Fixes: a94253232b04 ("arm64: dts: renesas: rzg3s-smarc-som: Add versa3 clock generator node")
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260302135703.162601-1-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
The CPG register regions were incorrectly sized. Update them to match
the actual hardware specification:
- First region (0x80280000): 0x1000 -> 0x10000 (64kiB)
- Second region (0x81280000): 0x9000 -> 0x10000 (64kiB)
Fixes: 4b3d31f0b81fe ("arm64: dts: renesas: Add initial SoC DTSI for the RZ/N2H SoC")
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260213131742.3606334-3-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
The CPG register regions were incorrectly sized. Update them to match
the actual hardware specification:
- First region (0x80280000): 0x1000 -> 0x10000 (64kiB)
- Second region (0x81280000): 0x9000 -> 0x10000 (64kiB)
Fixes: d17b34744f5e4 ("arm64: dts: renesas: Add initial support for the Renesas RZ/T2H SoC")
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260213131742.3606334-2-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
The HW user manual for the Renesas RZ/V2H(P) SoC (a.k.a r9a09g057)
states that only WDT1 is supposed to be accessed by the CA55 cores.
WDT0 is supposed to be used by the CM33 core, WDT2 is supposed
to be used by the CR8 core 0, and WDT3 is supposed to be used
by the CR8 core 1.
Remove wdt{0,2,3} from the SoC specific device tree to make it
compliant with the specification from the HW manual.
This change is harmless as there are currently no users of the
wdt{0,2,3} device tree nodes, only the wdt1 node is actually used.
Fixes: 095105496e7d ("arm64: dts: renesas: r9a09g057: Add WDT0-WDT3 nodes")
Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260203124247.7320-3-fabrizio.castro.jz@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Set an appropriate ramp delay for the SD0 I/O voltage regulator in the
CN15 SD overlay to make UHS-I voltage switching reliable during card
initialization.
This issue was observed on the RZ/V2H EVK, while the same UHS-I cards
worked on the RZ/V2N EVK without problems. Adding the ramp delay makes
the behavior consistent and avoids SD init timeouts.
Before this change SD0 could fail with:
mmc0: error -110 whilst initialising SD card
With the delay in place UHS-I cards enumerate correctly:
mmc0: new UHS-I speed SDR104 SDXC card at address aaaa
mmcblk0: mmc0:aaaa SR64G 59.5 GiB
mmcblk0: p1
Fixes: 3d6c2bc7629c8 ("arm64: dts: renesas: Add CN15 eMMC and SD overlays for RZ/V2H and RZ/V2N EVKs")
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260123225957.1007089-5-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Add a ramp delay of 60 uV/us to the vqmmc_sdhi0 voltage regulator to
fix UHS-I SD card detection failures.
Measurements on CN78 pin 4 showed the actual voltage ramp time to be
21.86ms when switching between 3.3V and 1.8V. A 25ms ramp delay has
been configured to provide adequate margin. The calculation is based
on the voltage delta of 1.5V (3.3V - 1.8V):
1500000 uV / 60 uV/us = 25000 us (25ms)
Prior to this patch, UHS-I cards failed to initialize with:
mmc0: error -110 whilst initialising SD card
After this patch, UHS-I cards are properly detected on SD0:
mmc0: new UHS-I speed SDR104 SDXC card at address aaaa
mmcblk0: mmc0:aaaa SR64G 59.5 GiB
Fixes: d065453e5ee09 ("arm64: dts: renesas: rzt2h-rzn2h-evk: Enable SD card slot")
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260123225957.1007089-2-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
contpte_ptep_set_access_flags() compared the gathered ptep_get() value
against the requested entry to detect no-ops. ptep_get() ORs AF/dirty
from all sub-PTEs in the CONT block, so a dirty sibling can make the
target appear already-dirty. When the gathered value matches entry, the
function returns 0 even though the target sub-PTE still has PTE_RDONLY
set in hardware.
For a CPU with FEAT_HAFDBS this gathered view is fine, since hardware may
set AF/dirty on any sub-PTE and CPU TLB behavior is effectively gathered
across the CONT range. But page-table walkers that evaluate each
descriptor individually (e.g. a CPU without DBM support, or an SMMU
without HTTU, or with HA/HD disabled in CD.TCR) can keep faulting on the
unchanged target sub-PTE, causing an infinite fault loop.
Gathering can therefore cause false no-ops when only a sibling has been
updated:
- write faults: target still has PTE_RDONLY (needs PTE_RDONLY cleared)
- read faults: target still lacks PTE_AF
Fix by checking each sub-PTE against the requested AF/dirty/write state
(the same bits consumed by __ptep_set_access_flags()), using raw
per-PTE values rather than the gathered ptep_get() view, before
returning no-op. Keep using the raw target PTE for the write-bit unfold
decision.
Per Arm ARM (DDI 0487) D8.7.1 ("The Contiguous bit"), any sub-PTE in a CONT
range may become the effective cached translation and software must
maintain consistent attributes across the range.
Fixes: 4602e5757bcc ("arm64/mm: wire up PTE_CONT for user mappings")
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Breno Leitao <leitao@debian.org>
Cc: stable@vger.kernel.org
Reviewed-by: Alistair Popple <apopple@nvidia.com>
Reviewed-by: James Houghton <jthoughton@google.com>
Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Tested-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Piotr Jaroszynski <pjaroszynski@nvidia.com>
Acked-by: Balbir Singh <balbirs@nvidia.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
We already have an ISB in __kvm_at() to make the address translation result
visible to subsequent reads of PAR_EL1. Remove the redundant one right
after it.
Signed-off-by: Zenghui Yu (Huawei) <zenghui.yu@linux.dev>
Link: https://patch.msgid.link/20260306074422.47694-1-zenghui.yu@linux.dev
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
When user_mem_abort() handles a nested stage-2 fault, it truncates
vma_pagesize to respect the guest's mapping size. However, the local
variable vma_shift is never updated to match this new size.
If the underlying host page turns out to be hardware poisoned,
kvm_send_hwpoison_signal() is called with the original, larger
vma_shift instead of the actual mapping size. This signals incorrect
poison boundaries to userspace and breaks hugepage memory poison
containment for nested VMs.
Update vma_shift to match the truncated vma_pagesize when operating
on behalf of a nested hypervisor.
Fixes: fd276e71d1e7 ("KVM: arm64: nv: Handle shadow stage 2 page faults")
Signed-off-by: Fuad Tabba <tabba@google.com>
Link: https://patch.msgid.link/20260304162222.836152-3-tabba@google.com
[maz: simplified vma_shift assignment from the original patch]
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
When a guest performs an atomic/exclusive operation on memory lacking
the required attributes, user_mem_abort() injects a data abort and
returns early. However, it fails to release the reference to the
host page acquired via __kvm_faultin_pfn().
A malicious guest could repeatedly trigger this fault, leaking host
page references and eventually causing host memory exhaustion (OOM).
Fix this by consolidating the early error returns to a new out_put_page
label that correctly calls kvm_release_page_unused().
Fixes: 2937aeec9dc5 ("KVM: arm64: Handle DABT caused by LS64* instructions on unsupported memory")
Signed-off-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Yuan Yao <yaoyuan@linux.alibaba.com>
Link: https://patch.msgid.link/20260304162222.836152-2-tabba@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Failure to read the descriptor (because it is outside of a memslot) should
result in a SEA being injected in the guest.
Suggested-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/86ms1m9lp3.wl-maz@kernel.org
Signed-off-by: Zenghui Yu (Huawei) <zenghui.yu@linux.dev>
Link: https://patch.msgid.link/20260225173515.20490-4-zenghui.yu@linux.dev
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
As per R_BFHQH,
" When an Address size fault is generated, the reported fault code
indicates one of the following:
If the fault was generated due to the TTBR_ELx used in the translation
having nonzero address bits above the OA size, then a fault at level 0. "
Fix the reported Address size fault level as being 0 if the base address is
wrongly programmed by L1.
Fixes: 61e30b9eef7f ("KVM: arm64: nv: Implement nested Stage-2 page table walk logic")
Signed-off-by: Zenghui Yu (Huawei) <zenghui.yu@linux.dev>
Link: https://patch.msgid.link/20260225173515.20490-3-zenghui.yu@linux.dev
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
check_base_s2_limits() checks the validity of SL0 and inputsize against
ia_size (inputsize again!) but the pseudocode from DDI0487 G.a
AArch64.TranslationTableWalk() says that we should check against the
implemented PA size.
We would otherwise fail to walk S2 with a valid configuration. E.g.,
granule size = 4KB, inputsize = 40 bits, initial lookup level = 0 (no
concatenation) on a system with 48 bits PA range supported is allowed by
architecture.
Fix it by obtaining PA size by kvm_get_pa_bits(). Note that
kvm_get_pa_bits() returns the fixed limit now and should eventually reflect
the per VM PARange (one day!). Given that the configured PARange should not
be greater that kvm_ipa_limit, it at least fixes the problem described
above.
While at it, inject a level 0 translation fault to guest if
check_base_s2_limits() fails, as per the pseudocode.
Fixes: 61e30b9eef7f ("KVM: arm64: nv: Implement nested Stage-2 page table walk logic")
Signed-off-by: Zenghui Yu (Huawei) <zenghui.yu@linux.dev>
Link: https://patch.msgid.link/20260225173515.20490-2-zenghui.yu@linux.dev
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
If, for any odd reason, we cannot converge to mapping size that is
completely contained in a memblock region, we fail to install a S2
mapping and go back to the faulting instruction. Rince, repeat.
This happens when faulting in regions that are smaller than a page
or that do not have PAGE_SIZE-aligned boundaries (as witnessed on
an O6 board that refuses to boot in protected mode).
In this situation, fallback to using a PAGE_SIZE mapping anyway --
it isn't like we can go any lower.
Fixes: e728e705802fe ("KVM: arm64: Adjust range correctly during host stage-2 faults")
Link: https://lore.kernel.org/r/86wlzr77cn.wl-maz@kernel.org
Cc: stable@vger.kernel.org
Cc: Quentin Perret <qperret@google.com>
Reviewed-by: Quentin Perret <qperret@google.com>
Link: https://patch.msgid.link/20260305132751.2928138-1-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
If vgic_allocate_private_irqs_locked() fails for any odd reason,
we exit kvm_vgic_create() early, leaving dist->rd_regions uninitialised.
kvm_vgic_dist_destroy() then comes along and walks into the weeds
trying to free the RDs. Got to love this stuff.
Solve it by moving all the static initialisation early, and make
sure that if we fail halfway, we're in a reasonable shape to
perform the rest of the teardown. While at it, reset the vgic model
on failure, just in case...
Reported-by: syzbot+f6a46b038fc243ac0175@syzkaller.appspotmail.com
Tested-by: syzbot+f6a46b038fc243ac0175@syzkaller.appspotmail.com
Fixes: b3aa9283c0c50 ("KVM: arm64: vgic: Hoist SGI/PPI alloc from vgic_init() to kvm_create_vgic()")
Link: https://lore.kernel.org/r/69a2d58c.050a0220.3a55be.003b.GAE@google.com
Link: https://patch.msgid.link/20260228164559.936268-1-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: stable@vger.kernel.org
|
|
Similar as commit 284922f4c563 ("x86: uaccess: don't use runtime-const
rewriting in modules") does, make arm64's runtime const not usable by
modules too, to "make sure this doesn't get forgotten the next time
somebody wants to do runtime constant optimizations". The reason is
well explained in the above commit: "The runtime-const infrastructure
was never designed to handle the modular case, because the constant
fixup is only done at boot time for core kernel code."
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Commit 143937ca51cc ("arm64, mm: avoid always making PTE dirty in
pte_mkwrite()") changed pte_mkwrite_novma() to only clear PTE_RDONLY
when PTE_DIRTY is set. This was to allow writable-clean PTEs for swap
pages that haven't actually been written.
However, this broke kexec and hibernation for some platforms. Both go
through trans_pgd_create_copy() -> _copy_pte(), which calls
pte_mkwrite_novma() to make the temporary linear-map copy fully
writable. With the updated pte_mkwrite_novma(), read-only kernel pages
(without PTE_DIRTY) remain read-only in the temporary mapping.
While such behaviour is fine for user pages where hardware DBM or
trapping will make them writeable, subsequent in-kernel writes by the
kexec relocation code will fault.
Add PTE_DIRTY back to all _PAGE_KERNEL* protection definitions. This was
the case prior to 5.4, commit aa57157be69f ("arm64: Ensure
VM_WRITE|VM_SHARED ptes are clean by default"). With the kernel
linear-map PTEs always having PTE_DIRTY set, pte_mkwrite_novma()
correctly clears PTE_RDONLY.
Fixes: 143937ca51cc ("arm64, mm: avoid always making PTE dirty in pte_mkwrite()")
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: stable@vger.kernel.org
Reported-by: Jianpeng Chang <jianpeng.chang.cn@windriver.com>
Link: https://lore.kernel.org/r/20251204062722.3367201-1-jianpeng.chang.cn@windriver.com
Cc: Will Deacon <will@kernel.org>
Cc: Huang, Ying <ying.huang@linux.alibaba.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Huang Ying <ying.huang@linux.alibaba.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The arm64 xchg/cmpxchg() wrappers cast the arguments to (unsigned long)
prior to invoking the static inline functions implementing the
operation. Some restrictive type annotations (e.g. __bitwise) lead to
sparse warnings like below:
sparse warnings: (new ones prefixed by >>)
fs/crypto/bio.c:67:17: sparse: sparse: cast from restricted blk_status_t
>> fs/crypto/bio.c:67:17: sparse: sparse: cast to restricted blk_status_t
Force the casting in the arm64 xchg/cmpxchg() wrappers to silence
sparse.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202602230947.uNRsPyBn-lkp@intel.com/
Link: https://lore.kernel.org/r/202602230947.uNRsPyBn-lkp@intel.com/
Cc: Will Deacon <will@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Pull kvm fixes from Paolo Bonzini:
"Arm:
- Make sure we don't leak any S1POE state from guest to guest when
the feature is supported on the HW, but not enabled on the host
- Propagate the ID registers from the host into non-protected VMs
managed by pKVM, ensuring that the guest sees the intended feature
set
- Drop double kern_hyp_va() from unpin_host_sve_state(), which could
bite us if we were to change kern_hyp_va() to not being idempotent
- Don't leak stage-2 mappings in protected mode
- Correctly align the faulting address when dealing with single page
stage-2 mappings for PAGE_SIZE > 4kB
- Fix detection of virtualisation-capable GICv5 IRS, due to the
maintainer being obviously fat fingered... [his words, not mine]
- Remove duplication of code retrieving the ASID for the purpose of
S1 PT handling
- Fix slightly abusive const-ification in vgic_set_kvm_info()
Generic:
- Remove internal Kconfigs that are now set on all architectures
- Remove per-architecture code to enable KVM_CAP_SYNC_MMU, all
architectures finally enable it in Linux 7.0"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: always define KVM_CAP_SYNC_MMU
KVM: remove CONFIG_KVM_GENERIC_MMU_NOTIFIER
KVM: arm64: Deduplicate ASID retrieval code
irqchip/gic-v5: Fix inversion of IRS_IDR0.virt flag
KVM: arm64: Revert accidental drop of kvm_uninit_stage2_mmu() for non-NV VMs
KVM: arm64: Fix protected mode handling of pages larger than 4kB
KVM: arm64: vgic: Handle const qualifier from gic_kvm_info allocation type
KVM: arm64: Remove redundant kern_hyp_va() in unpin_host_sve_state()
KVM: arm64: Fix ID register initialization for non-protected pKVM guests
KVM: arm64: Optimise away S1POE handling when not supported by host
KVM: arm64: Hide S1POE from guests when not supported by the host
|
|
Pull bpf fixes from Alexei Starovoitov:
- Fix alignment of arm64 JIT buffer to prevent atomic tearing (Fuad
Tabba)
- Fix invariant violation for single value tnums in the verifier
(Harishankar Vishwanathan, Paul Chaignon)
- Fix a bunch of issues found by ASAN in selftests/bpf (Ihor Solodrai)
- Fix race in devmpa and cpumap on PREEMPT_RT (Jiayuan Chen)
- Fix show_fdinfo of kprobe_multi when cookies are not present (Jiri
Olsa)
- Fix race in freeing special fields in BPF maps to prevent memory
leaks (Kumar Kartikeya Dwivedi)
- Fix OOB read in dmabuf_collector (T.J. Mercier)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: (36 commits)
selftests/bpf: Avoid simplification of crafted bounds test
selftests/bpf: Test refinement of single-value tnum
bpf: Improve bounds when tnum has a single possible value
bpf: Introduce tnum_step to step through tnum's members
bpf: Fix race in devmap on PREEMPT_RT
bpf: Fix race in cpumap on PREEMPT_RT
selftests/bpf: Add tests for special fields races
bpf: Retire rcu_trace_implies_rcu_gp() from local storage
bpf: Delay freeing fields in local storage
bpf: Lose const-ness of map in map_check_btf()
bpf: Register dtor for freeing special fields
selftests/bpf: Fix OOB read in dmabuf_collector
selftests/bpf: Fix a memory leak in xdp_flowtable test
bpf: Fix stack-out-of-bounds write in devmap
bpf: Fix kprobe_multi cookies access in show_fdinfo callback
bpf, arm64: Force 8-byte alignment for JIT buffer to prevent atomic tearing
selftests/bpf: Don't override SIGSEGV handler with ASAN
selftests/bpf: Check BPFTOOL env var in detect_bpftool_path()
selftests/bpf: Fix out-of-bounds array access bugs reported by ASAN
selftests/bpf: Fix array bounds warning in jit_disasm_helpers
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for 7.0, take #1
- Make sure we don't leak any S1POE state from guest to guest when
the feature is supported on the HW, but not enabled on the host
- Propagate the ID registers from the host into non-protected VMs
managed by pKVM, ensuring that the guest sees the intended feature set
- Drop double kern_hyp_va() from unpin_host_sve_state(), which could
bite us if we were to change kern_hyp_va() to not being idempotent
- Don't leak stage-2 mappings in protected mode
- Correctly align the faulting address when dealing with single page
stage-2 mappings for PAGE_SIZE > 4kB
- Fix detection of virtualisation-capable GICv5 IRS, due to the
maintainer being obviously fat fingered...
- Remove duplication of code retrieving the ASID for the purpose of
S1 PT handling
- Fix slightly abusive const-ification in vgic_set_kvm_info()
|
|
KVM_CAP_SYNC_MMU is provided by KVM's MMU notifiers, which are now always
available. Move the definition from individual architectures to common
code.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
All architectures now use MMU notifier for KVM page table management.
Remove the Kconfig symbol and the code that is used when it is
disabled.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
struct bpf_plt contains a u64 target field. Currently, the BPF JIT
allocator requests an alignment of 4 bytes (sizeof(u32)) for the JIT
buffer.
Because the base address of the JIT buffer can be 4-byte aligned (e.g.,
ending in 0x4 or 0xc), the relative padding logic in build_plt() fails
to ensure that target lands on an 8-byte boundary.
This leads to two issues:
1. UBSAN reports misaligned-access warnings when dereferencing the
structure.
2. More critically, target is updated concurrently via WRITE_ONCE() in
bpf_arch_text_poke() while the JIT'd code executes ldr. On arm64,
64-bit loads/stores are only guaranteed to be single-copy atomic if
they are 64-bit aligned. A misaligned target risks a torn read,
causing the JIT to jump to a corrupted address.
Fix this by increasing the allocation alignment requirement to 8 bytes
(sizeof(u64)) in bpf_jit_binary_pack_alloc(). This anchors the base of
the JIT buffer to an 8-byte boundary, allowing the relative padding math
in build_plt() to correctly align the target field.
Fixes: b2ad54e1533e ("bpf, arm64: Implement bpf_arch_text_poke() for arm64")
Signed-off-by: Fuad Tabba <tabba@google.com>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20260226075525.233321-1-tabba@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Commit 3e86e4d74c04 ("kbuild: keep .modinfo section in
vmlinux.unstripped") added .modinfo to ELF_DETAILS while removing it
from COMMON_DISCARDS, as it was needed in vmlinux.unstripped and
ELF_DETAILS was present in all architecture specific vmlinux linker
scripts. While this shuffle is fine for vmlinux, ELF_DETAILS and
COMMON_DISCARDS may be used by other linker scripts, such as the s390
and x86 compressed boot images, which may not expect to have a .modinfo
section. In certain circumstances, this could result in a bootloader
failing to load the compressed kernel [1].
Commit ddc6cbef3ef1 ("s390/boot/vmlinux.lds.S: Ensure bzImage ends with
SecureBoot trailer") recently addressed this for the s390 bzImage but
the same bug remains for arm, parisc, and x86. The presence of .modinfo
in the x86 bzImage was the root cause of the issue worked around with
commit d50f21091358 ("kbuild: align modinfo section for Secureboot
Authenticode EDK2 compat"). misc.c in arch/x86/boot/compressed includes
lib/decompress_unzstd.c, which in turn includes lib/xxhash.c and its
MODULE_LICENSE / MODULE_DESCRIPTION macros due to the STATIC definition.
Split .modinfo out from ELF_DETAILS into its own macro and handle it in
all vmlinux linker scripts. Discard .modinfo in the places where it was
previously being discarded from being in COMMON_DISCARDS, as it has
never been necessary in those uses.
Cc: stable@vger.kernel.org
Fixes: 3e86e4d74c04 ("kbuild: keep .modinfo section in vmlinux.unstripped")
Reported-by: Ed W <lists@wildgooses.com>
Closes: https://lore.kernel.org/587f25e0-a80e-46a5-9f01-87cb40cfa377@wildgooses.com/ [1]
Tested-by: Ed W <lists@wildgooses.com> # x86_64
Link: https://patch.msgid.link/20260225-separate-modinfo-from-elf-details-v1-1-387ced6baf4b@kernel.org
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
|
|
The counters_read_on_cpu() function warns when called with IRQs
disabled to prevent deadlock in smp_call_function_single(). However,
this warning is spurious when reading counters on the current CPU,
since no IPI is needed for same CPU reads.
Commit 12eb8f4fff24 ("cpufreq: CPPC: Update FIE arch_freq_scale in
ticks for non-PCC regs") changed the CPPC Frequency Invariance Engine
to read AMU counters directly from the scheduler tick for non-PCC
register spaces (like FFH), instead of deferring to a kthread. This
means counters_read_on_cpu() is now called with IRQs disabled from the
tick handler, triggering the warning.
Fix this by restructuring the logic: when IRQs are disabled (tick
context), call the function directly for same-CPU reads. Otherwise
use smp_call_function_single().
Fixes: 997c021abc6e ("cpufreq: CPPC: Update FIE arch_freq_scale in ticks for non-PCC regs")
Suggested-by: Will Deacon <will@kernel.org>
Signed-off-by: Sumit Gupta <sumitg@nvidia.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Ben reports that when running with CONFIG_DEBUG_PREEMPT, using
__arch_counter_get_cntvct_stable() results in well deserves warnings,
as we access a per-CPU variable without preemption disabled.
Fix the issue by disabling preemption on reading the counter. We can
probably do a lot better by not disabling preemption on systems that
do not require horrible workarounds to return a valid counter value,
but this plugs the issue for the time being.
Fixes: 29cc0f3aa7c6 ("arm64: Force the use of CNTVCT_EL0 in __delay()")
Reported-by: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/aZw3EGs4rbQvbAzV@e134344.arm.com
Tested-by: Ben Horgan <ben.horgan@arm.com>
Tested-by: André Draszik <andre.draszik@linaro.org>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The ARM64_WORKAROUND_REPEAT_TLBI workaround is used to mitigate several
errata where broadcast TLBI;DSB sequences don't provide all the
architecturally required synchronization. The workaround performs more
work than necessary, and can have significant overhead. This patch
optimizes the workaround, as explained below.
The workaround was originally added for Qualcomm Falkor erratum 1009 in
commit:
d9ff80f83ecb ("arm64: Work around Falkor erratum 1009")
As noted in the message for that commit, the workaround is applied even
in cases where it is not strictly necessary.
The workaround was later reused without changes for:
* Arm Cortex-A76 erratum #1286807
SDEN v33: https://developer.arm.com/documentation/SDEN-885749/33-0/
* Arm Cortex-A55 erratum #2441007
SDEN v16: https://developer.arm.com/documentation/SDEN-859338/1600/
* Arm Cortex-A510 erratum #2441009
SDEN v19: https://developer.arm.com/documentation/SDEN-1873351/1900/
The important details to note are as follows:
1. All relevant errata only affect the ordering and/or completion of
memory accesses which have been translated by an invalidated TLB
entry. The actual invalidation of TLB entries is unaffected.
2. The existing workaround is applied to both broadcast and local TLB
invalidation, whereas for all relevant errata it is only necessary to
apply a workaround for broadcast invalidation.
3. The existing workaround replaces every TLBI with a TLBI;DSB;TLBI
sequence, whereas for all relevant errata it is only necessary to
execute a single additional TLBI;DSB sequence after any number of
TLBIs are completed by a DSB.
For example, for a sequence of batched TLBIs:
TLBI <op1>[, <arg1>]
TLBI <op2>[, <arg2>]
TLBI <op3>[, <arg3>]
DSB ISH
... the existing workaround will expand this to:
TLBI <op1>[, <arg1>]
DSB ISH // additional
TLBI <op1>[, <arg1>] // additional
TLBI <op2>[, <arg2>]
DSB ISH // additional
TLBI <op2>[, <arg2>] // additional
TLBI <op3>[, <arg3>]
DSB ISH // additional
TLBI <op3>[, <arg3>] // additional
DSB ISH
... whereas it is sufficient to have:
TLBI <op1>[, <arg1>]
TLBI <op2>[, <arg2>]
TLBI <op3>[, <arg3>]
DSB ISH
TLBI <opX>[, <argX>] // additional
DSB ISH // additional
Using a single additional TBLI and DSB at the end of the sequence can
have significantly lower overhead as each DSB which completes a TLBI
must synchronize with other PEs in the system, with potential
performance effects both locally and system-wide.
4. The existing workaround repeats each specific TLBI operation, whereas
for all relevant errata it is sufficient for the additional TLBI to
use *any* operation which will be broadcast, regardless of which
translation regime or stage of translation the operation applies to.
For example, for a single TLBI:
TLBI ALLE2IS
DSB ISH
... the existing workaround will expand this to:
TLBI ALLE2IS
DSB ISH
TLBI ALLE2IS // additional
DSB ISH // additional
... whereas it is sufficient to have:
TLBI ALLE2IS
DSB ISH
TLBI VALE1IS, XZR // additional
DSB ISH // additional
As the additional TLBI doesn't have to match a specific earlier TLBI,
the additional TLBI can be implemented in separate code, with no
memory of the earlier TLBIs. The additional TLBI can also use a
cheaper TLBI operation.
5. The existing workaround is applied to both Stage-1 and Stage-2 TLB
invalidation, whereas for all relevant errata it is only necessary to
apply a workaround for Stage-1 invalidation.
Architecturally, TLBI operations which invalidate only Stage-2
information (e.g. IPAS2E1IS) are not required to invalidate TLB
entries which combine information from Stage-1 and Stage-2
translation table entries, and consequently may not complete memory
accesses translated by those combined entries. In these cases,
completion of memory accesses is only guaranteed after subsequent
invalidation of Stage-1 information (e.g. VMALLE1IS).
Taking the above points into account, this patch reworks the workaround
logic to reduce overhead:
* New __tlbi_sync_s1ish() and __tlbi_sync_s1ish_hyp() functions are
added and used in place of any dsb(ish) which is used to complete
broadcast Stage-1 TLB maintenance. When the
ARM64_WORKAROUND_REPEAT_TLBI workaround is enabled, these helpers will
execute an additional TLBI;DSB sequence.
For consistency, it might make sense to add __tlbi_sync_*() helpers
for local and stage 2 maintenance. For now I've left those with
open-coded dsb() to keep the diff small.
* The duplication of TLBIs in __TLBI_0() and __TLBI_1() is removed. This
is no longer needed as the necessary synchronization will happen in
__tlbi_sync_s1ish() or __tlbi_sync_s1ish_hyp().
* The additional TLBI operation is chosen to have minimal impact:
- __tlbi_sync_s1ish() uses "TLBI VALE1IS, XZR". This is only used at
EL1 or at EL2 with {E2H,TGE}=={1,1}, where it will target an unused
entry for the reserved ASID in the kernel's own translation regime,
and have no adverse affect.
- __tlbi_sync_s1ish_hyp() uses "TLBI VALE2IS, XZR". This is only used
in hyp code, where it will target an unused entry in the hyp code's
TTBR0 mapping, and should have no adverse effect.
* As __TLBI_0() and __TLBI_1() no longer replace each TLBI with a
TLBI;DSB;TLBI sequence, batching TLBIs is worthwhile, and there's no
need for arch_tlbbatch_should_defer() to consider
ARM64_WORKAROUND_REPEAT_TLBI.
When building defconfig with GCC 15.1.0, compared to v6.19-rc1, this
patch saves ~1KiB of text, makes the vmlinux ~42KiB smaller, and makes
the resulting Image 64KiB smaller:
| [mark@lakrids:~/src/linux]% size vmlinux-*
| text data bss dec hex filename
| 21179831 19660919 708216 41548966 279fca6 vmlinux-after
| 21181075 19660903 708216 41550194 27a0172 vmlinux-before
| [mark@lakrids:~/src/linux]% ls -l vmlinux-*
| -rwxr-xr-x 1 mark mark 157771472 Feb 4 12:05 vmlinux-after
| -rwxr-xr-x 1 mark mark 157815432 Feb 4 12:05 vmlinux-before
| [mark@lakrids:~/src/linux]% ls -l Image-*
| -rw-r--r-- 1 mark mark 41007616 Feb 4 12:05 Image-after
| -rw-r--r-- 1 mark mark 41073152 Feb 4 12:05 Image-before
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Oliver Upton <oupton@kernel.org>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The TLBI instruction accepts XZR as a register argument, and for TLBI
operations with a register argument, there is no functional difference
between using XZR or another GPR which contains zeroes. Operations
without a register argument are encoded as if XZR were used.
Allow the __TLBI_1() macro to use XZR when a register argument is all
zeroes.
Today this only results in a trivial code saving in
__do_compat_cache_op()'s workaround for Neoverse-N1 erratum #1542419. In
subsequent patches this pattern will be used more generally.
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Oliver Upton <oupton@kernel.org>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
vm_get_page_prot() short-circuits the protection_map[] lookup for a
VM_SHADOW_STACK mapping since it uses a different PIE index from the
typical read/write/exec permissions. However, the side effect is that it
also ignores mprotect(PROT_NONE) by creating an accessible PTE.
Special-case the !(vm_flags & VM_ACCESS_FLAGS) flags to use the
protection_map[VM_NONE] permissions instead. No GCS attributes are
required for an inaccessible PTE.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Fixes: 6497b66ba694 ("arm64/mm: Map pages for guarded control stack")
Cc: stable@vger.kernel.org
Cc: Mark Brown <broonie@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: David Hildenbrand <david@kernel.org>
Reviewed-by: David Hildenbrand (Arm) <david@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
When FEAT_LPA2 is enabled, bits 8-9 of the PTE replace the
shareability attribute with bits 50-51 of the output address. The
_PAGE_GCS{,_RO} definitions include the PTE_SHARED bits as 0b11 (this
matches the other _PAGE_* definitions) but using this macro directly
leads to the following panic when enabling GCS on a system/model with
LPA2:
Unable to handle kernel paging request at virtual address fffff1ffc32d8008
Mem abort info:
ESR = 0x0000000096000004
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x04: level 0 translation fault
Data abort info:
ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000
CM = 0, WnR = 0, TnD = 0, TagAccess = 0
GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
swapper pgtable: 4k pages, 52-bit VAs, pgdp=0000000060f4d000
[fffff1ffc32d8008] pgd=100000006184b003, p4d=0000000000000000
Internal error: Oops: 0000000096000004 [#1] SMP
CPU: 0 UID: 0 PID: 513 Comm: gcs_write_fault Tainted: G M 7.0.0-rc1 #1 PREEMPT
Tainted: [M]=MACHINE_CHECK
Hardware name: QEMU QEMU Virtual Machine, BIOS 2025.02-8+deb13u1 11/08/2025
pstate: 03402005 (nzcv daif +PAN -UAO +TCO +DIT -SSBS BTYPE=--)
pc : zap_huge_pmd+0x168/0x468
lr : zap_huge_pmd+0x2c/0x468
sp : ffff800080beb660
x29: ffff800080beb660 x28: fff00000c2058180 x27: ffff800080beb898
x26: fff00000c2058180 x25: ffff800080beb820 x24: 00c800010b600f41
x23: ffffc1ffc30af1a8 x22: fff00000c2058180 x21: 0000ffff8dc00000
x20: fff00000c2bc6370 x19: ffff800080beb898 x18: ffff800080bebb60
x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000007
x14: 000000000000000a x13: 0000aaaacbbbffff x12: 0000000000000000
x11: 0000ffff8ddfffff x10: 00000000000001fe x9 : 0000ffff8ddfffff
x8 : 0000ffff8de00000 x7 : 0000ffff8da00000 x6 : fff00000c2bc6370
x5 : 0000ffff8da00000 x4 : 000000010b600000 x3 : ffffc1ffc0000000
x2 : fff00000c2058180 x1 : fffff1ffc32d8000 x0 : 000000c00010b600
Call trace:
zap_huge_pmd+0x168/0x468 (P)
unmap_page_range+0xd70/0x1560
unmap_single_vma+0x48/0x80
unmap_vmas+0x90/0x180
unmap_region+0x88/0xe4
vms_complete_munmap_vmas+0xf8/0x1e0
do_vmi_align_munmap+0x158/0x180
do_vmi_munmap+0xac/0x160
__vm_munmap+0xb0/0x138
vm_munmap+0x14/0x20
gcs_free+0x70/0x80
mm_release+0x1c/0xc8
exit_mm_release+0x28/0x38
do_exit+0x190/0x8ec
do_group_exit+0x34/0x90
get_signal+0x794/0x858
arch_do_signal_or_restart+0x11c/0x3e0
exit_to_user_mode_loop+0x10c/0x17c
el0_da+0x8c/0x9c
el0t_64_sync_handler+0xd0/0xf0
el0t_64_sync+0x198/0x19c
Code: aa1603e2 d34cfc00 cb813001 8b011861 (f9400420)
Similarly to how the kernel handles protection_map[], use a
gcs_page_prot variable to store the protection bits and clear PTE_SHARED
if LPA2 is enabled.
Also remove the unused PAGE_GCS{,_RO} macros.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Fixes: 6497b66ba694 ("arm64/mm: Map pages for guarded control stack")
Reported-by: Emanuele Rocca <emanuele.rocca@arm.com>
Cc: stable@vger.kernel.org
Cc: Mark Brown <broonie@kernel.org>
Cc: Will Deacon <will@kernel.org>
Reviewed-by: David Hildenbrand (Arm) <david@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The only caller of ioremap_prot() outside of the generic ioremap()
implementation is generic_access_phys(), which passes a 'pgprot_t' value
determined from the user mapping of the target 'pfn' being accessed by
the kernel. On arm64, the 'pgprot_t' contains all of the non-address
bits from the pte, including the permission controls, and so we end up
returning a new user mapping from ioremap_prot() which faults when
accessed from the kernel on systems with PAN:
| Unable to handle kernel read from unreadable memory at virtual address ffff80008ea89000
| ...
| Call trace:
| __memcpy_fromio+0x80/0xf8
| generic_access_phys+0x20c/0x2b8
| __access_remote_vm+0x46c/0x5b8
| access_remote_vm+0x18/0x30
| environ_read+0x238/0x3e8
| vfs_read+0xe4/0x2b0
| ksys_read+0xcc/0x178
| __arm64_sys_read+0x4c/0x68
Extract only the memory type from the user 'pgprot_t' in ioremap_prot()
and assert that we're being passed a user mapping, to protect us against
any changes in future that may require additional handling. To avoid
falsely flagging users of ioremap(), provide our own ioremap() macro
which simply wraps __ioremap_prot().
Cc: Zeng Heng <zengheng4@huawei.com>
Cc: Jinjiang Tu <tujinjiang@huawei.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Fixes: 893dea9ccd08 ("arm64: Add HAVE_IOREMAP_PROT support")
Reported-by: Jinjiang Tu <tujinjiang@huawei.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Rename our ioremap_prot() implementation to __ioremap_prot() and convert
all arch-internal callers over to the new function.
ioremap_prot() remains as a #define to __ioremap_prot() for
generic_access_phys() and will be subsequently extended to handle user
permissions in 'prot'.
Cc: Zeng Heng <zengheng4@huawei.com>
Cc: Jinjiang Tu <tujinjiang@huawei.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
We currently have three versions of the ASID retrieval code, one
in the S1 walker, and two in the VNCR handling (although the last
two are limited to the EL2&0 translation regime).
Make this code common, and take this opportunity to also simplify
the code a bit while switching over to the TTBRx_EL1_ASID macro.
Reviewed-by: Joey Gouly <joey.gouly@arm.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Link: https://patch.msgid.link/20260225104718.14209-1-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Commit 0c4762e26879 ("KVM: arm64: nv: Avoid NV stage-2 code when NV is
not supported") added an early return to several functions in
arch/arm64/kvm/nested.c to prevent a UBSAN shift-out-of-bounds error
when accessing the pgt union for non-nested VMs.
However, this early return was inadvertently applied to
kvm_arch_flush_shadow_all() as well, causing it to skip the call to
kvm_uninit_stage2_mmu(kvm) for all non-nested VMs.
For pKVM, skipping this teardown means the host never unshares the
guest's memory with the EL2 hypervisor. When the host kernel later
recycles these leaked pages for a new VM, it attempts to re-share them.
The hypervisor correctly rejects this with -EPERM, triggering a host
WARN_ON and hanging the guest.
Fix this by dropping the early return from kvm_arch_flush_shadow_all().
The for-loop guarding the nested MMU cleanup already bounds itself when
nested_mmus_size == 0, allowing execution to proceed to
kvm_uninit_stage2_mmu() as intended.
Reported-by: Mark Brown <broonie@kernel.org>
Closes: https://lore.kernel.org/all/60916cb6-f460-4751-b910-f63c58700ad0@sirena.org.uk/
Fixes: 0c4762e26879 ("KVM: arm64: nv: Avoid NV stage-2 code when NV is not supported")
Signed-off-by: Fuad Tabba <tabba@google.com>
Tested-by: Mark Brown <broonie@kernel.org>
Link: https://patch.msgid.link/20260222083352.89503-1-tabba@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
