| Age | Commit message (Collapse) | Author |
|
The Cobalt PCI I/O window starts at 0x1000, excluding the VIA IDE
controller's fixed compatibility-mode ports at 0x170, 0x1f0, 0x376 and
0x3f6. Since pcibios_enable_device() was converted to
pci_enable_resources(), these unclaimed resources cause pata_via to
fail to probe with -EINVAL.
Start the PCI I/O window at zero to cover the southbridge legacy ports,
retaining 0x1000 as the allocation minimum via PCIBIOS_MIN_IO. Register
the PCI controller from plat_mem_setup(), before the VIA reservations
and i8259 initialization, so the legacy resources do not conflict with
the host bridge window and prevent PCI bus scanning.
Keep the VIA resource reservations in plat_mem_setup() after the PCI
controller registration and use insert_resource() to nest them beneath
the PCI window. The i8259 and RTC resources are also claimed beneath it.
Boot-tested on a Qube2 with a MIPS64 kernel. All seven PCI functions
enumerate, both tulip devices bind, and pata_via initializes both ATA
hosts and detects the ST380012A 80 GB disk. All 18 boot checks pass,
including a read-only disk test and Ethernet ping.
Fixes: ae81aad5c2e1 ("MIPS: PCI: Use pci_enable_resources()")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
CRIME_ID's low nibble reads 1 on both rev 1.1 and 1.4 chips, so it does
not give the revision. ID 0xa has it in bits 63:32, and ID 0xb is rev
1.5. Decode it, and drop the unused CRIME_ID_REV.
Signed-off-by: Imre Kaloz <kaloz@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Pull MIPS updates from Thomas Bogendoerfer:
"MM:
- fix huge TLB handling
OCTEON:
- correct register access for CN6xxxx SOCs
- provide DTs for platforms where U-Boot doesn't have a DT
Decstation:
- fix 64bit kernels
- build cleanups
Others:
- cleanups and fixes"
* tag 'mips_7.4' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (30 commits)
MIPS: octeon: Add detection of UBNT Edgeroute Lite devices
MIPS: octeon: Use MIPS_MACHINE for boards without provided device tree
MIPS: GT64120: Remove duplicate GT_PCI1M1LD_OFS and GT_PCI1M1HD_OFS
mips: dts: pic32: pic32mzda: Remove unused address-cells, size-cells property
MIPS: generic: Remove undefined image 'ramdisk'
docs: ABI: lefi: drop "ROM Size" in sysfs file doc.
docs: ABI: lefi: use literal blocks
MIPS: dec: Reorder header inclusions in setup.c
MIPS: Reword KBUILD_SYM32 documentation for clarity
MIPS: Eliminate redundant KBUILD_SYM32 check
MIPS: decstation_64_defconfig: Compile the kernel with warnings as errors
MIPS: decstation_64_defconfig: Regenerate for 7.x
MIPS: dec: Add missing <linux/interrupt.h> inclusion to reset.h
MIPS: Only check -msym32 when need-compiler
MIPS: remove unused <asm/cmp.h> header
MIPS: remove unused <asm/mips-boards/sead3-addr.h> header
MIPS: remove unused <asm/amon.h> header
MIPS: Octeon: offer the RedBoot parser when it is modular
MIPS: Octeon: size the swiotlb for a modular OHCI platform driver
MIPS: mm: do not write a huge TLB entry when the probe misses
...
|
|
Pull KVM updates from Paolo Bonzini:
"ARM:
- pKVM state isolation: years after pKVM started being enabled
upstream, we finally get the basics in the form of state isolation.
The vcpu state is now off-limit for the host for protected VMs
- pKVM also grows a hypervisor-private memory allocator, allowing it
to deal with sub-page allocation, much like everywhere else
- pKVM also lands a trace_printk() equivalent, which hopefully will
make debugging a bit easier
- First shot at annotating portions of the KVM/arm64 code to be
extracted and built on s390. The real fun is yet to come
- Allow pre-faulting of stage-2 canonical mappings from userspace,
joining x86 and s390 in implementing this feature
- Add a reverse mapping infrastructure for shadow stage-2,
significantly improving performance when MMU notifiers kick in, and
avoiding full unmap of all shadow tables for this VM
- Next step of GICv5 enablement, adding support for the IRS block,
and providing both SPI and LPI support. This is the first point
where KVM/arm64 can support an SMP GICv5 guest
- As a preliminary to eventually enabling CCA, add a bunch of
infrastructure to KVM/arm64, splitting some of the basic operations
into individual backends (normal VM, normal pKVM VM, protected pKVM
VM). This allows CCA to later slot in without polluting the rest of
KVM with its firmware-driven nonsense
- Make ID registers immutable from the point where a vcpu is able to
run, even if it fails to run. This prevents KVM from sampling
untrusted values
- Restore some type checking to the EL2 object. KVM/arm64 originally
had some strong type checking between the kernel and the EL2
object, but lost it along the way when the private hypercall
interface was (somewhat pointlessly) converted to SMCCC. Type
checking is back, syscall style, and with added sparse goodies
- Expand the FFA support to FFA_NOTIFICATION_*, and add some
sanitisation of the protocol that pKVM relays to the "trusted"
runtime
- Make GICv3 RD assignment more robust to userspace nonsense
- Convert the remaining MMU fault handler backends to
kvm_s2_fault_vma_info and co., fixing a number of bugs in the
process
- Fix the SError/SEA selftests to be both more robust and less
braindead
- Fix a smattering of documentation bugs, some of them as a result of
our AI friends spitting out credible assertions based on
non-existing symbols
- The usual collection of low impact bug fixes (SMCCC, timers, PMU)
Loongarch:
- Add separate vmid support
- Simplify MSI interrupt injection
- Add crash hypercall support
- Allow to set pv_feature until vCPU run
- Enable HW page table walk automatically in selftests
s390:
- rework page allocation for secure guest variable storage
- Selftests and documentation improvements
- Replace get_zeroed_page with kzalloc
- Fix corner cases of floating interrupt injection
- Initial arm64 on s390 support
x86:
- Clean up the handling of vcpu->arch.xen.long_mode to be consistent
and correctly handle 32-bit/64-bit alignment, and various other bug
fixes have accumulated over the months since v1
- Grab KVM's SRCU "lock" in kvm_zap_gfn_range() to fix a recurring
bug where callers fail to do so
- Fix a variety of issues in the pre-fault code that are mostly
benign in the current code base, but will show up in big ways
if/when the pre-faulting logic is used to implementing
prefetch-on-fault for the TDP MMU
- For PREEMPT_RT=y kernels, drop the rmaps' individual bit-spinlock
and just walk the rmaps' with mmu_lock taken. On the write side
(which always uses mmu_lock), the bit-spinlock was assuming that
preemption was disabled, but that is *not* true when rwlocks become
sleepable
- Prepare a memory_fault exit (paired with -EFAULT) when KVM hits an
error PFN, e.g. so that userspace can resolve transient issues
instead of killing the guest. Convert a variety of WARN()+EFAULT
paths into KVM_BUG_ON()+EIO so that KVM can hard commit to filling
memory_fault on -EFAULTs that occur in the page fault path
- Fix a NX hugepage un-accounting bug where KVM would always uncharge
the shadow MMU, even when handling TDP MMU pages
- Mask off the address space ID when checking for illegal usage of
kvm_set_internal_memslot() to prevent false negatives on the sanity
check
- Explicitly zero reserved flags when delivering a SynIC message to
avoid leaking a byte of stack information to the guest
- Rework TDX's handling of the canonical MMU root level to not rely
on userspace to fill CPUID correctly, as doing so lets userspace
trivially trigger a KVM_BUG_ON()
- Reject KVM_SET_NESTED_STATE if userspace "restores" L1 with
EFER.LMA=1 && EFER.LME=0, which confuses KVM into trying to
configure an 64-bit MMU without PAE
- Ignore EFER.LMA (clear it from KVM's cached save state) if
EFER.LME=0 when preparing L2 state, to fix another way to confuse
KVM's MMU (and because real hardware also ignores EFER.LMA)
- Improve KVM's sanity checks for a misconfigured MMU to (hopefully)
detect all of the ways KVM can botch EFER.LMA vs. CR4.PAE
- Remove the "full" out-param from kvm_x86_ops.flush_tlb_gva() as the
param is only used to avoid what effectively amounts to a single
memory write
- Fix a mostly-benign bug where KVM can write through a guest's
read-only mapping due to not checking the error code when
expediting emulated MMIO page faults
- Honor the guest's view of the "EFER.LMSLE must be zero" defeature
so that userspace can provide migration compatibility between Rome
and Milan+
- Pend a KVM_REQ_EVENT request when an exception is morphed into a
nested VM-Exit, otherwise KVM can fail to actually deliver the
nested VM-Exit, e.g. when injecting a page fault
- Add support for PML on SVM
- Add support for virtualizing Bus Lock Detect on SVM, and fix a
number of DR6 bugs and warts along the way
- Fix a variety of warts in KVM's handling of guest TSC, kvmclock,
and timekeeping in general, as a (big) first step towards
addressing several longstanding problems with the kvmclock
implementation. Most notably, fix a precision issue where
get_kvmclock_ns() computed the clock from the *host* TSC without
applying guest TSC scaling, causing systemic drift from the values
the guest computes from its own TSC
- Rip out KVM's shadow timekeeping structures, now that ktime
snapshots are powerful enough to replace it
- Misc fixes and cleanups
x86 (AMD):
- Fix a benign-in-practice bug where KVM unintentionally sets a
non-zero error code when delivering exceptions to SEV-ES+ guests
- Force a new ASID in both VMCBs on pCPU migration to fix a bug where
KVM can run a VMCB with a stale ASID due to the tracking being
per-CPU, not per-VMCB
- Return INVALID_INPUT to the guest instead of exiting to userspace
with -EIO if KVM can't access "guest request" buffer, i.e. try to
keep the guest alive if the guest or userspace goofs
x86 (Intel):
- Enable Notify VM-Exits (now called Instruction Timeout in the SDM)
and Bus Lock VM-Exits for TDX guests when they're enabled by
userspace (KVM forgot to wire up the TDX Module knobs)
- Move all common (between VMX and TDX) APIs/helpers to
common.h/main.c, and change all namespace prefixes from "vmx" to
"vt"
- Fix a thankfully benign bug (due to other areas of KVM being
hardened) where userspace can bypass INIT_MEM_REGION's address wrap
check by providing a nr_pages that will overflow a u64 when
converted to bytes, and fix an also- benign off-by-one bug in the
check (inclusive vs. exclusive)
- Set the vmcs.GUEST_ACTIVITY_STATE back to ACTIVE when userspace
sets KVM's mp_state to anything other than HALTED, e.g. so that a
vCPU doesn't get stuck in HLT if userspace emulates RESET
guest_memfd:
- Take the invalidate lock when unbinding a dying file to fix a race
with kvm_gmem_invalidate_end() that results in KVM leaving the MMU
invalidation count elevated. Not taking the lock in the first place
was pure misguided paranoid
- When binding a memslot, purge the bindings if storing the new
memslot fails, as Xarray's "store range" API can subtly fail
partway through
- Establish memslot<=>guest_memfd bindings *after* the memslot is
ready, as the memslot becomes reachable the instant the binding is
installed
- Don't grab a page refcount when reloading an SNP VMSA and stop
returning a "struct page" from guest_memfd's PFN lookup altogether,
to ensure that KVM doesn't hold any unnecessary refcounts (the
lifetime of the page is ensured by MMU notifiers and similar
hooks). Preventing unnecessary refcounts greatly simplifies
supporting in-place SHARED=>PRIVATE conversions
- Add support for in-place PRIVATE<=>SHARED conversion, i.e. allow a
single guest_memfd instance to be used for both PRIVATE and SHARED
variations of CoCo guests' memory (though not at the same time).
This eliminates the need to double allocate guest memory for TDX
and SNP, and is basically a hard requirement for pKVM, which relies
on being able to preserve memory contents on conversions
- Hack-a-fix a deadlock bug in ->error_remove_folio() by returning
-EBUSY if the filemap invalidate lock is contended. Punt on a
proper fix for the moment, as a proper fix likely involves
reworking truncate_error_folio()
- Add a pile of selftests for in-place conversions
- Misc guest_memfd cleanups
Generic:
- Move some configuration items to preprocessor symbols, to help with
arm-on-s390's need to compile the same code twice with different
values
- Allow KVM implementations to choose alternative device names, also
for s390's support of ARM virtualmachines
- Switch the KVM-VFIO interface and external consumers over to
standard file-based reference counting, eliminating all external
KVM symbol exports
Selftests:
- Rework KVM selftest's handling of memory regions all so that PPC
can force its page table allocations to be naturally aligned
- PPC support
- Fix emulation of VMPTRST and VMPTRLD when eVMCS is in-use to match
real Hyper-V's behavior
- Saturate L2's TSC frequency if stacking L1 and L2 scaling
multipliers exceeds what hardware supports, as attempting to run L2
with an illegal multiplier will either cause VM-Entry to fail (VMX)
or trigger a #GP when writing MSR_AMD64_TSC_RATIO (SVM). The #GP is
thankfully benign in the grand scheme as even "unsafe" WRMSRs have
exception fixup
- Rework KVM selftest's handling of memory regions so that PPC can
force its page table allocations to be naturally aligned
- Clean up selftest's VMX instruction helpers, and drop an absurd
number of completely useless return values, e.g. functions that
unconditionally return %true and then have every caller assert
success
- Add selftests support for Zhaoxin CPUs
- Overhaul the TSC scaling test to add a regression test for the
saturation behavior, and to increase its coverage in general
- Fix selftests usage various NUMA syscalls to account for an
undocumented, but known since 2007, off-by-one kernel bug. Add
helpers to try and avoid re-introducing the same flaws in the
future
- Automatically run xAPIC IPI migration test (between NUMA nodes)
when possible, as the entire point of the test is verify KVM's
handling of page migration of the APIC backing page
- Misc cleanups"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (506 commits)
KVM: always make in-place conversion a compile-time constant when possible
KVM: x86: leave the legacy private attribute in for TDX and SEV
KVM: split CONFIG_KVM_PRIVATE_MEMATTR_VM out of KVM_VM_MEMORY_ATTRIBUTES
selftests: kvm: remove useless comma operator
arm64: Use proper include variant
MAINTAINERS: Add entry for ARM on s390 KVM
KVM: s390: arm64: Integrate arm on s390
KVM: s390: arm64: Implement basic page fault handler
KVM: s390: arm64: Implement vCPU IOCTLs
KVM: s390: arm64: Implement vm/vcpu create destroy
KVM: s390: arm64: Implement required functions
KVM: s390: Add basic arm64 kvm module
s390/hwcaps: Report SAE support as hwcap
KVM: s390: arm64: Introduce host definitions
s390: Introduce Start Arm Execution instruction
KVM: s390: Use arm64 code
s390/tools: Use arm64 headers
KVM: s390: Use dedicated function for migration mode
s390/Kconfig: remove PCI dependency from HAS_IOMEM
KVM: s390: Kick PV cpus at the right time for service irqs
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Pull bpf updates from Alexei Starovoitov:
"Major changes:
- Introduce scalar evolution (SCEV) analysis in the verifier.
It infers how registers and stack slots change in a loop and lets
the verifier check bounded loops with induction variables as ranges
instead of walking every iteration. The number of processed insns
drops ten fold in programs with loops (Eduard Zingerman)
- Add 'callx' instruction: indirect call of a static BPF subprogram.
The address is taken with ld_imm64 or loaded from read-only data.
Supported by x86-64, arm64 and riscv64 JITs (Alexei Starovoitov, Pu
Lehui)
- Add unwind_goto and unwind_exit instructions, so that Rust panic or
C++ exception can run destructors of every frame it passes through.
The normal path is free of unwind code. Supported by x86-64 and
arm64 JITs (Alexei Starovoitov)
- Support programs compiled by rust-bpf: treat load and store through
a number as arena access with BPF_F_ARENA_SCALAR, accept rust names
in BTF (Alexei Starovoitov)
- Raise BPF program stack size from 512 bytes to 2 KiB on x86-64 and
arm64 (Kumar Kartikeya Dwivedi)
- Support struct, union and __int128 up to 16 bytes passed and
returned by value in BPF subprograms and kfuncs, and fix x86-64 and
arm64 trampolines for such arguments (Yonghong Song)
- Introduce a common way to attach struct_ops to a cgroup via
bpf_link. bpf_tcp_ops is the first user and mirrors TCP sock_ops
callbacks (Martin KaFai Lau, Amery Hung)
- Describe inlined functions in BTF. New kinds tell where the inline
sites are and how to fetch the arguments there.
CONFIG_DEBUG_INFO_BTF_INLINE keeps it apart from the main BTF in
.BTF.inline section or in btf_vmlinux_inline.ko (Alan Maguire)
- Fix many memory safety, lifetime and locking bugs in BPF core,
verifier, iterators, local storage, dynptr, devmap, cpumap and
seg6local (Josef Bacik, Alexei Starovoitov)
- Diff stat is dominated by selftests and by removal of
lib/test_bpf.c. Its 16k lines of instruction tests were converted
to BPF selftests that BPF CI runs on every architecture it covers
(Daniel Borkmann)
Other features and fixes:
- Add KASAN checks to memory accesses of JITed programs on x86-64
(Alexis Lothoré)
- Complete unification of helper, kfunc and subprog argument checks
in the verifier (Amery Hung)
- Add bpf_copy_from_user_mm[_str]() kfuncs (Anastasios Papagiannis)
- Various features and fixes (Daniel Borkmann):
- Add .bpf keyring for program signature verification, modelled
after dm-verity keyring, and support ML-DSA in signing tools
- Emit shorter and faster code in x86-64 JIT for patterns that
LLVM generates
- Fix various issues in gotox handling
- Let BPF LSM set xattrs at inode creation with bpf_inode_init_xattr()
(David Windsor, Daniel Borkmann)
- Use sleepable page allocation in sleepable arena paths. Fix races
between arena free, allocation and user page fault (Emil Tsalapatis)
- Switch BPF crypto from lskcipher to AES-CBC and AES-ECB libraries
(Eric Biggers)
- Add bpf_proactive_reclaim() kfunc (Hui Zhu)
- Render decl_tags in libbpf btf_dump and add tests for bpftool C
dump (Ihor Solodrai)
- Speed up tracing_multi attach on x86 (Jiri Olsa)
- Various features and fixes (Kumar Kartikeya Dwivedi):
- Add BPF_PROG_STREAM_OPEN command to read BPF streams through a
file descriptor with poll support
- Let kernel structs publish arena pointers with __arena type tag
- Fix __uninit kfunc output buffers and fastcall rewrite with
indirect stack accesses
- Refuse CO-RE relocations for signed programs
- Add enqueue_rcvq and dequeue_rcvq hooks to bpf_tcp_ops to adjust
sk_rcvlowat and avoid unnecessary wakeups (Kuniyuki Iwashima)
- Add bpf_ksock_sendto() kfunc and allow ksock connect and send from
bpf_wq (Mahe Tardy)
- Fix racy plt target update in arm64 bpf_arch_text_poke()
(Matthew Wood)
- Restructure BPF selftests Makefile as a layered build
(Mykola Lysenko)
- Speed up hash map lookups for u32 and u64 keys (Mykyta Yatsenko)
- Add signed div/mod, movsx, bswap and gotol to MIPS JITs, signed
div/mod to parisc JITs (Nicholas Dudar, Johan Almbladh)
- Fix stack overflow in build ID parser on 32-bit (Nickolai
Zeldovich)
- Add stack arguments, signed arena loads and gotox to riscv64 JIT.
Pu Lehui is now co-maintainer of riscv BPF JITs (Pu Lehui, Chen
Pei, Feng Jiang)
- Add bpf_call_rcu() and bpf_call_rcu_tasks_trace() kfuncs. Support
fetching and/or/xor atomics in arena on x86-64 (Puranjay Mohan)
- Fix flaky selftests, selftests with clang 23 and bpf-gcc
(Qiliang Yuan, KaFai Wan, Vineet Gupta)
- Fix builds broken by fatal resolve_btfids warnings, BTF generation
on ARC, and define arch_cmpxchg_local() on arc, hexagon and
openrisc (Sasha Levin)
- Reduce memory use of hash maps by up to 50% per element
(T.J. Mercier)
- Mark pointer fields of sched_ext ops arguments as trusted (Tejun
Heo)
- Remove legacy bpf_asm, bpf_dbg and bpf_jit_disasm tools (Xia Yan)
- Fix index overflow in queue and stack maps, arena range tree after
allocation failure, tail call loop after freplace detach, lost
signal in bpf_send_signal() (Yuan Chen)
- Many more fixes and cleanups"
* tag 'bpf-next-7.4' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (660 commits)
selftests/bpf: Time tc_edt from its first packet with data
selftests/bpf: Test unwind_exit of an exception callback
selftests/bpf: Tests for 32-bit scalar evolution bounds computation
bpf: Reject unwind_goto and unwind_exit in offloaded progs
bpf: Support 32-bit linear scalar evolution
bpf: Make unwind_exit of an exception callback exit in JITs
selftests/bpf: Test forbidden bpf_ksock_sendto() LSM attach
selftests/bpf: Test ksock sendto()
bpf: Add bpf_ksock_sendto() kfunc
selftests/bpf: Test unwinding from R0: R2 subprog
selftests/bpf: Add a C++ prog with exceptions
selftests/bpf: Add tests for unwind_goto and unwind_exit
bpf, arm64: Support unwind_goto and unwind_exit
bpf, x86: Support unwind_goto and unwind_exit
bpf: Add unwind_goto and unwind_exit insns
tools/bpf: Remove legacy BPF tools
bpf: Annotate data races on bpf_lru_node type
selftests/bpf: Add arena allocation race tests
bpf: Fix arena race between page free and alloc leading to incoherency
bpf: Revalidate faulted arena pages before installing user mappings
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- "selftests/mm: improve khugepaged coverage" (Kiryl Shutsemau):
Give khugepaged a proper workout. Extend the tests to all supported
mTHP orders, check exactly which windows collapsed, and make scan
completion deterministic. Race collapse against faults, pinning, fork
and remap; verify that the contents survive.
Add coverage for whole-page-table zaps and memory pressure too.
- "selftests/mm: separate GUP microbenchmarking from functional testing"
(Sarthak Sharma):
Untangle GUP benchmarking from correctness testing. Move the
benchmark into tools/mm, add a standalone harness-based GUP selftest,
and move shared helpers into tools/lib/mm. Give each tool one job
instead of mixing timing measurements with correctness checks.
Cover the mapping, pinning and batch-size combinations explicitly.
- "mm: Switch device DAX to section-based vmemmap optimization" (Muchun
Song):
Apply section-based vmemmap optimization to device DAX. Rework the
backing metadata layout to save memory while preserving the handling
of device memory hotplug and its different alignment and lifetime
requirements.
- "mm: Introduce section-based vmemmap optimization for HugeTLB"
(Muchun Song):
Cut the memory consumed by HugeTLB's struct page array with
section-based vmemmap optimization. Arrange the metadata so large
huge pages need fewer backing pages, while keeping initialization,
teardown and the various hugepage configurations straight.
- "mm/huge_memory: clean up and decouple the anon and file split
helpers" (Kairui Song):
Separate anonymous and file-backed folio splitting, which have rather
different locking and bookkeeping requirements. Move the work into
separate helpers, drop dead checks and tidy swap-cache handling. Fix
error paths, including one that could leave a folio frozen.
Keep the swap cache cases separate from file-cache splitting.
- "mm: Unconditional per-VMA locks and cleanups" (Dave Hansen):
Make per-VMA locking unconditional and clean up the old conditional
code around it. This removes configuration-dependent plumbing and
lets callers depend on one locking model rather than carrying both
cases along.
- "memcg: remove the v1 soft limit" (Shakeel Butt):
Remove the old cgroup v1 memory soft-limit machinery. This has long
since been superseded by the newer memory-control interfaces; hauling
around a separate reclaim scheme for it no longer buys us much.
- "read proc/pid/smaps_rollup under per-vma lock" (Suren Baghdasaryan):
Read /proc/PID/smaps_rollup using per-VMA locks where possible,
rather than holding mmap_lock across the entire walk. Retain the
contention fallback and add tearing tests. This considerably reduces
latency when another thread is busy changing its mappings.
- "mm/damon: introduce data access-as-a-data attribute" (SJ Park):
Teach DAMON to expose memory access observations as data attributes,
making them available to the probe and filtering machinery. Extend
the interfaces, documentation and tests so the new information can be
used rather than merely collected.
- "Remove PG_private by using page/folio->private checks instead" (Zi
Yan):
Get rid of PG_private and use the folio's private pointer to say
whether private data is attached. Convert the filesystem users,
including erofs, f2fs and md, and clean up the old accessors and
flags. There are a few special cases, notably swapcache and hugetlb,
which need explicit care.
- "mm: make userland page table freeing RCU-safe" (Lorenzo Stoakes):
Make freeing userspace page tables safe against RCU readers. Sort out
the page-table lifetime and locking rules so walkers cannot stumble
over freed tables while mappings are being torn down.
- "make unused huge shrinker memcg aware" (Qi Zheng):
Make shmem's unused-huge-folio shrinker aware of memory cgroups, so
reclaim can find those folios under the right memcg. Wire up the
per-memcg tracking and its lifetime rules, and give the shrinklist
its own lockdep class to avoid spurious dependency reports.
- "mm: Drop pxd_ERROR()" (Anshuman Khandual):
Remove the old pxd_ERROR() page-table checks and their
architecture-specific baggage. Simplify the common page-table
interfaces and callers now that these checks no longer serve a
useful purpose.
- "memcg: group struct fields by access pattern" (Shakeel Butt):
Rearrange memcg's hot and cold fields according to how they're
actually accessed. Keep frequently updated counters and their
neighboring state from fighting over cachelines and reduce needless
cacheline traffic.
- "mm/damon/core: fix the size charged for a filter-trimmed region"
(Donggeun Yoo):
Fix DAMOS quota accounting when a filter trims a monitoring region.
Charge only the part left after filtering, not the original region,
and add KUnit coverage. Previously the excluded memory could eat into
the quota and make schemes run more slowly than requested.
- "mm/damon: add kunit and selftests for probes and probe weights" (SJ
Park):
Add more tests for DAMON probes and their weights, including
validation and the results reported to userspace. This is mostly
about catching regressions in the newer probe infrastructure before
they become harder to diagnose.
- "mm: memcontrol: constify the read side of the read side of the memcg
API" (Tal Zussman):
Mark the read-only parts of the memcg interface const, from folio and
lruvec accessors to counters and swap helpers. Most of this is
mechanical, but it makes the contracts clearer and lets the compiler
catch accidental writes.
- "mm/damon/vaddr: support {prep,apply}_probes" (SJ Park):
Support the new prepare/apply probe operations in DAMON's
virtual-address backend. This brings vaddr monitoring into line with
the probe infrastructure and makes the added probe types useful there
too.
- "mm/mglru: clean up folio counters and flag usage" (Kairui Song):
Simplify MGLRU's folio counters and flag handling. Remove redundant
accounting paths and make the state transitions easier to follow
without changing the intended reclaim policy.
- "arch, mm/execmem: resolve confusion about set_direct_map_valid_noflush()"
(Mike Rapoport (Microsoft)):
Clarify and straighten out the set_direct_map_valid_noflush()
interface across architectures and execmem. Make the requested
mapping changes and the callers' expectations agree, rather than
relying on subtly different architecture behavior.
- "mm: zswap: free cold writeback folios promptly" (Alexandre Ghiti):
Free zswap writeback folios as soon as their disk write completes.
They are cold temporary buffers, so putting them on the LRU only
makes reclaim rediscover them later. Extend swap-cache dropbehind and
let zswap keep these folios off the LRU altogether.
- "mm: gup: cleanup gup_fast call chain" (Aristeu Rozanski):
Clean up the GUP-fast call chain and simplify how the fast-path
helpers pass their arguments and results around. Keep the page-pin
behavior the same while making the call sequence easier to maintain.
- "mm: optimize zone-device memmap initialization" (Li Zhe):
Speed up initialization of zone-device struct pages. Avoid redundant
work when setting up large device-memory ranges, where touching every
descriptor can get expensive.
- "mm/zswap: shrink zswap_entry via a pool id" (Jianyue Wu):
Reduce the size of zswap_entry by storing a compact pool identifier
instead of a full pointer. Keep the pool lookup and lifetime handling
correct while saving per-entry metadata.
- "mm/damon: support access monitoring of hugetlb-backed memory"
(Krishna Iyer):
Let DAMON monitor hugetlb-backed memory too. Extend the relevant
access checks and add coverage so those mappings no longer fall
through a hole in the monitoring machinery.
- "mm/execmem: fixes and cleanups for the ROX cache" (Mike Rapoport):
Tidy execmem's read-only-executable cache and fix its handling of the
awkward allocation and release cases. The aim is to make the cache's
ownership and permission transitions more predictable.
- "zsmallc: remove old object read API" (Sergey Senozhatsky):
Drop zsmalloc's old object-read API and move its remaining users to
the supported access mechanism. This removes a duplicate interface
which we no longer need.
- "mm/mempolicy: stop copying state in the interleave paths" (Gregory
Price):
Stop copying mempolicy state in the interleave paths when a reference
to the existing policy will do. This avoids extra work and makes the
ownership rules less obscure.
- "mm/mglru: speed up inc_min_seq() and fix cold/hot inversions" (Barry
Song):
Make MGLRU's generation advancement cheaper and fix cases where cold
and hot folios end up in the wrong order. Adjust the counter and list
handling so reclaim doesn't keep passing over the better eviction
candidates.
- "mm: Fix MF_DELAYED handling on memory failure" (Lisa Wang):
Treat MF_DELAYED as a partially completed memory-failure operation,
not an outright failure. Propagate that result correctly through
shmem and the generic handler, fix the extra-reference accounting,
and add tests for the resulting SIGBUS behavior.
- "tools/mm/page_owner_sort: fix --sort, add module filter, improve
usage" (Ye Liu):
Fix page_owner_sort's --sort handling, add module-based filtering and
make the usage output more helpful. This makes the tool less
frustrating when tracking down who is holding on to pages.
- "mm/damon: move damos filter range arguments validation to core" (SJ
Park):
Move DAMOS filter range validation into the core, where all callers
can share it. Also close the sysfs read-twice races which could pass
inconsistent ranges, and add tests for invalid input.
- "mm/damon: misc cleanups" (Zenghui Yu):
Clean up a collection of small DAMON rough edges in the core,
interfaces and tests. No large behavior change here, just simpler
code and fewer opportunities for confusion.
- "mm/damon: cleanup code, add test cases, and update guidances in
docs" (SJ Park):
Clean up DAMON's core and interfaces, add missing test cases and
bring the documentation into line with the code. These changes should
make the newer facilities easier to understand and maintain.
- "mm/damon: introduce hugepage_size probe filter" (SJ Park):
Add a DAMON probe filter for hugepage size. Let users select a range
of folio sizes through sysfs, validate the range and document the new
interface, so monitoring can concentrate on memory backed by the
desired hugepage sizes.
- "selftests/mm: pagemap_ioctl test fixes and cleanups" (Zenghui Yu):
Fix some pagemap ioctl test assumptions and clean up their setup and
reporting. Make failures point to the operation that went wrong
rather than to test harness bookkeeping.
- "mm: avoid large folio splits when swap is unavailable" (Johannes
Weiner):
Avoid splitting large folios merely to attempt swap when no swap
space is available. There is little point paying for an expensive
split when reclaim cannot actually swap the resulting pages out.
- "mm: workingset: fix the shadow node budget under MGLRU" (Hui Zhu):
Fix the workingset shadow-node budget with MGLRU enabled. Keep the
shadow entries within the intended limits so refault tracking does
not quietly consume more metadata than it should.
- "selftests/mm: TAP output and global-state fixes" (Song Hu):
Fix selftests which produce misleading TAP output or fail to restore
global settings after a run. A test ought to leave the system as it
found it, particularly when a whole suite follows behind.
- "mm: remove page_swap_entry()" (Tal Zussman):
Remove page_swap_entry() and convert its remaining users to the folio
and swap-entry helpers. Lose an old page-level interface and make the
swap paths a little more consistent.
- "mm: refactor zonelist constructors and iterators" (Gregory Price):
Refactor the zonelist construction and walk helpers to reduce
duplicated logic. Keep the allocation ordering rules intact while
making it clearer how zones are selected.
- "mm: kmemleak: batch the struct page scan" (Breno Leitao):
Scan adjacent struct pages in batches instead of taking kmemleak_lock
once for every single page. This preserves scan coverage and the
lock-hold bound, while cutting overhead substantially on debug
kernels.
- "mm/damon: misc improvements in tests and documents" (Zenghui Yu):
Fix some DAMON selftests which leave kdamond running or fail under
Python safe-path mode, and improve the KUnit coverage and
documentation. Nothing especially glamorous, but these are worth
doing.
- "mm/damon: introduce probe_hits_wsum DAMOS core filter" (SJ Park):
Add a DAMOS core filter using weighted probe-hit counts. This gives
schemes another way to select regions based on what the monitoring
probes observed.
- "mm/mglru: fix ineffective memory protection for non-kswapd reclaim"
(Ridong Chen):
Fix MGLRU's memory protection handling for reclaim outside kswapd.
The protection settings weren't having the intended effect in these
paths, leaving protected memory more exposed than requested.
- "mm/damon: improve readability, clarity and test coverage" (SJ Park):
Simplify a handful of DAMON core helpers, clarify their behavior and
expand test coverage. There are no intended userspace-visible changes
in this batch.
- "mm: replace PF_KCOMPACTD/PF_KSWAPD with kthread_func()" (Kefeng
Wang):
Stop identifying reclaim and compaction workers through the PF_KSWAPD
and PF_KCOMPACTD task flags. Use their kthread functions instead and
remove the redundant flag plumbing.
- "mm/hugetlb: fix surplus accounting and availability checks during
demotion" (Longlong Xia):
Fix HugeTLB surplus accounting and availability checks when demoting
huge pages. Keep the counters and reservation decisions consistent as
one huge page turns into several smaller ones.
- "mm/damon: add kunit tests for probe_hits handling and probe params
validation" (Jason Angelov):
Add KUnit tests for DAMON probe-hit handling and invalid probe
parameters. These cover edge cases that were too easy to miss in
ordinary monitoring tests.
- "mm/damon: fix misc bugs in kunit, quota goals and sysfs refresh_ms"
(SJ Park):
Fix a few DAMON bugs in KUnit tests, quota-goal handling and the
sysfs refresh interval. Small fixes, but the incorrect results and
control behavior were real.
- "mm: zswap: optimize zswap invalidate and store" (Kefeng Wang):
Simplify zswap's invalidate and store paths to avoid avoidable
lookups and work. Keep the entry lifetime rules intact while making
those frequent operations cheaper.
- "mm: replace custom ratelimiting logic" (Pedro Falcato):
Replace hand-rolled MM rate limiting with the common kernel helpers.
There is no need to maintain another local version of the same
mechanism.
- "mm/vmalloc: minor cleanups" (Ye Liu):
Tidy some vmalloc initialization and reporting code, and pull
duplicated vmap-area insertion work into a helper. No functional
changes are intended.
- "mm/mglru: clean up isolate_folios for readability and clarity"
(Ridong Chen):
Clean up MGLRU's isolate_folios() so the decisions are easier to read
and verify. Keep reclaim behavior unchanged while removing
unnecessary twists in the control flow.
- "Catch automatic storage in IDA and Maple Tree definitions" (Yury
Norov):
Catch IDA and maple-tree definitions placed in automatic storage
where the lifetime rules are wrong or easy to get wrong. Add checks
so such mistakes are harder to slip through unnoticed.
- "mm, swap: some random fixes and cleanups" (Kemeng Shi):
Fix and simplify a few unrelated swap paths, removing redundant work
and tidying up error handling. A small collection of things which
were better fixed than left lying around.
- "mm/page_io: folio conversion cleanups" (Tal Zussman):
Finish some page-to-folio conversions in swap I/O, removing obsolete
wrappers and using folio operations consistently. The I/O behavior is
intended to remain the same.
- "mm/swap: skip empty clusters in the swapoff scan" (Youngjun Park):
Skip empty swap clusters during swapoff instead of walking slots
which have nothing to release. This avoids pointless work on sparsely
used swap devices.
- "mm: trace: decode architecture-specific VMA flags" (Meijing Zhao):
Teach the VMA trace output to decode architecture-specific flags,
rather than leaving them as unexplained bits. That should make
tracing a good deal more useful when debugging unusual mappings.
- "mm, swap: don't spin on a bad swap entry" (Breno Leitao):
Stop repeatedly retrying a swap entry which is already known to be
bad. Make the error path terminate cleanly instead of wasting CPU
chasing an entry that cannot be used.
- "mm/page_isolation: fix UBSAN shift-out-of-bounds in
isolate_single_pageblock" (Qi Xi):
Fix an out-of-range shift in isolate_single_pageblock() and tighten
its associated boundary handling. UBSAN found the issue; the result
should be more robust pageblock isolation.
- "mm: khugepaged: fix tracepoint UAF" (Vernon Yang):
Fix a use-after-free in khugepaged tracepoint handling. Make sure the
information recorded by tracing stays valid for as long as the trace
event needs it.
- "mm/damon: fix DAMOS bugs in core, paddr and vaddr" (SJ Park):
Fix several DAMOS problems across the core and physical- and
virtual-address backends. The changes close error cases and bring the
implementations back into agreement.
- "mm/hugetlb_cgroup: move the per-node usage along with the folio"
(Hongfu Li):
Move HugeTLB per-node usage accounting when folios migrate between
nodes or are reparented to another cgroup. Otherwise numa_stat can
retain stale charges and even underflow when the folio is freed.
- "docs/core-api: memory-allocation: add k[mz]alloc_obj() and clarify
kmalloc" (Mike Rapoport):
Document the typed k[mz]alloc_obj() allocation helpers and clear up
some kmalloc guidance. Make it easier for callers to choose the right
interface.
- "selftests/mm: Validate selections and scope memfd_secret setup"
(Tianyi Chen):
Check selftest selections before running and confine memfd_secret
setup to the cases that actually need it. Avoid confusing failures
caused by the test harness itself.
- "mm/damon: move zero damos quota target_value handling to the core
layer" (SJ Park):
Handle a zero DAMOS quota goal target in the core rather than making
each user of the interface invent its own rule. Keep quota decisions
consistent across callers.
- "mm/damon: Introduce a huge page collapsing mechanism using auto
tuning" (Asier Gutierrez):
Add an auto-tuned DAMON mechanism for collapsing huge pages. Use
monitoring feedback to decide when collapse is worthwhile rather than
forcing one fixed policy onto every workload.
- "kmemleak: fix stale documentation and raise the verbose default"
(Breno Leitao):
Bring the kmemleak documentation up to date and require a third
confirming scan before verbose kernels print a suspected leak. The
extra scan helps suppress transient false positives in noisy debug
builds.
- "mm/memory: improve insert_pages() error handling" (Avi Weiss):
Tighten insert_pages() error handling so partial failures are
reported and cleaned up consistently. The caller should not have to
guess how far the operation got.
- "mm/damon: allow NULL or unstarted damon_ctx parameter for
damon_call()" (SJ Park):
Make damon_call() handle NULL and not-yet-started contexts safely.
Simplify the rules for callers and avoid an indefinite wait on an
invalid state.
- "mm/damon: introduce pgidle_set probe filter type" (SJ Park):
Add a pgidle_set DAMON probe filter, giving monitoring users another
way to select pages by their idle-tracking state. Wire it through the
filter interfaces and tests.
- "mm/damon/core: remove unused helper functions" (Cheng-Han Wu):
Remove DAMON core helpers which no longer have callers. Keep the API
surface smaller rather than retaining dead code just in case.
- "mm: stop calling pmd_folio() on special PMDs" (Gregory Price):
Avoid calling pmd_folio() on special PMD mappings that have no struct
page. The old assumption could fault in procfs walkers; use the
normal-folio checks and handle those mappings properly.
- "mm: remove three unused helpers from mm.h" (Tal Zussman):
Remove three unused helpers from mm.h. Fewer obsolete interfaces for
the next person to stumble over.
- "mm/damon: improvements in efficiency, error handling, documents"
(Liew Rui Yan):
Skip needless DAMOS quota work once the quota is full, propagate a
missing sysfs error and tidy a couple of comments. The ignored error
could make a monitoring-start request appear successful when it
wasn't.
- "docs/mm/damon/design: add explanation of nr_snapshots" (Liew Rui
Yan):
Explain DAMON's nr_snapshots accounting in the design documentation
and straighten out the associated terminology. Make it clearer what
users should expect from that counter.
- "selftests/cgroup: fixes for test_zswap on single core VM" (Wilson
Felipe Pereira):
Fix two test_zswap failures on single-CPU VMs. Wait for the exiting
child's cgroup to become unpopulated before reconfiguring it, and
avoid another test assumption which breaks under constrained
scheduling.
- "docs/ksm: fix advisor documentation and comment" (Jinjiang Tu):
Correct the KSM advisor documentation and a misleading code comment.
Keep the description aligned with how the advisor actually works.
- "Fix bugs in HugeTLB allocation when mem_cgroup_charge_hugetlb()
fails" (Ackerley Tng):
Fix HugeTLB allocation cleanup when the memcg charge fails. Make sure
failure exits undo what was allocated rather than leaving stale
accounting or resources behind.
- "mm, memcg: fix memory.peak reset clobbering other fds' watermark"
(Ridong Chen):
Fix memory.peak reset handling so resetting one file descriptor
doesn't overwrite the watermark kept for another. Keep those per-open
measurements independent as intended.
- "mm: reject zone device folios in more folio walkers" (Gregory
Price):
Reject zone-device folios in page walkers that cannot safely handle
them. Extend the existing checks rather than assuming every folio has
ordinary system-memory backing.
- "percpu: remove code with no effect" (Sang-Heon Jeon):
Remove a few pieces of percpu code which no longer do anything. There
is no reason to keep maintaining dead paths.
* tag 'mm-stable-2026-10-19-21-33' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (539 commits)
mm: shmem: assign a lock class to the unused huge shrinklist
mm: vmscan: put rotation-missed folios at the LRU tail
mm: kmemleak: scan the struct page array in MAX_SCAN_SIZE batches
mm: kmemleak: move the struct page scan into a helper
mm/damon: document that a zero sample_interval is accepted
mm/damon: fix typos in comments
mm/damon/sysfs: propagate damon_call() error in turn_damon_on
mm/damon/core: skip quota score setup when the quota is full
mm/damon/tests/core-kunit: test the size charged for a filter-trimmed region
mm/damon/core: charge only the part of a region the filter left
mm: disallow raw PFN mappings of huge/shared zeropage
selftests/mm: zap whole PTE tables in the khugepaged race harness
selftests/mm: add memory-pressure threads to the khugepaged race harness
selftests/mm: race the collapse of windows with holes
selftests/mm: add khugepaged race harness
selftests/mm: check that one khugepaged pass collapses one window
selftests/mm: run every supported collapse order by default
selftests/mm: cover a shared-source collapse write race
selftests/mm: parameterize the mixed-source collapse case by source order
selftests/mm: add order-parameterized khugepaged collapse cases
...
|
|
Most architectures' asm/vdso/vsyscall.h do not define any symbols.
Add an empty asm-generic variant and replace the pointless
architecture-specific copies.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260909-vdso-asm-generic-vsyscall-h-v1-14-63ae856cc659@linutronix.de
|
|
Recent refactoring have made the header empty.
Remove it and its mentions.
Also that header was never a real asm-generic header anyways.
It had no reason to be in the asm-generic directory.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260909-vdso-asm-generic-vsyscall-h-v1-5-63ae856cc659@linutronix.de
|
|
With s390 hosting multiple independent KVM implementations within the
same kernel build (native s390 KVM and arm64 on s390), global Kconfig
selections force both implementations to inherit options that only apply
to one of them.
Replace global Kconfig options which only apply to one KVM
implementation with architecture-specific opt-in defines in the
respective <asm/kvm_host.h>. Only remove Kconfig symbols that would be
different on both s390 KVM implementations
- __KVM_HAVE_INVALID_WAKEUPS (formerly HAVE_KVM_INVALID_WAKEUPS)
- __KVM_HAVE_MSI (formerly HAVE_KVM_MSI)
- __KVM_HAVE_NO_POLL (formerly HAVE_KVM_NO_POLL)
- __KVM_HAVE_READONLY_MEM (formerly HAVE_KVM_READONLY_MEM)
- __KVM_HAVE_VCPU_RUN_PID_CHANGE (formerly HAVE_KVM_VCPU_RUN_PID_CHANGE)
This allows each architecture and guest implementation to configure its
supported capabilities independently in its kvm_host header and eliminates
adding unnecessary fallback stubs across different KVM targets.
Acked-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Link: https://patch.msgid.link/20261013121343.1997112-1-seiden@linux.ibm.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
There are no more users left for any pxd_ERROR() either in generic MM or
in the platform MM. Hence all these platform macros along with their
generic fallback could be dropped across the tree.
Link: https://lore.kernel.org/20260831054331.625505-9-anshuman.khandual@arm.com
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> # m68k
Acked-by: David Hildenbrand (Arm) <david@kernel.org>
Acked-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Cc: Helge Deller <deller@gmx.de>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: James Bottomley <james.bottomley@HansenPartnership.com>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: Lorenzo Stoakes <ljs@kernel.org>
Cc: Rich Felker <dalias@libc.org>
Cc: Samuel Holland <samuel.holland@sifive.com>
Cc: WANG Xuerui <kernel@xen0n.name>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
|
|
The GT_PCI1M1LD_OFS and GT_PCI1M1HD_OFS register offsets are defined
twice in a row with identical values. Identical macro redefinitions are
valid C, so the compiler never warned about it. Drop the second copy.
No functional change.
Signed-off-by: Aristo Chen <aristo.chen@canonical.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Pull the header directly that is required for `irqreturn_t' type.
Fixes: 0eb77376912e ("MIPS: DEC: Fix prototypes for halt/reset handlers")
Signed-off-by: WangYuli <wangyuli@uniontech.com>
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
arch/mips/include/asm/cmp.h appears never to have been used by the
kernel. CMP support was removed in commit 7fb6f7b0af67 ("MIPS: Remove
deprecated CONFIG_MIPS_CMP"), but it was left behind. Remove it.
Signed-off-by: Ethan Nelson-Moore <enelsonmoore@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
The last use of arch/mips/include/asm/mips-boards/sead3-addr.h was
removed in commit 64601cb1343f ("leds: Remove SEAD-3 driver") but it
was left behind. Remove it.
Signed-off-by: Ethan Nelson-Moore <enelsonmoore@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
The last use of arch/mips/include/asm/amon.h was removed in
commit 7fb6f7b0af67 ("MIPS: Remove deprecated CONFIG_MIPS_CMP"),
but it was left behind. Remove it.
Signed-off-by: Ethan Nelson-Moore <enelsonmoore@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Fix typos in comments, reported by scripts/checkpatch.pl using the
misspelling list in scripts/spelling.txt. Only touches comments, no code
changes.
Assisted-by: Cursor:claude-opus-5
Signed-off-by: Hemanth Selam <hemanth.selam@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Add uasm emitters for the signed DIV, MOD, DDIV, and DMOD
instructions. Provide both pre-R6 and R6 division forms so users can
select the instruction appropriate for the target ISA.
Add SEB and SEH emitters for R2-or-newer CPUs. These will be used by
the follow-on BPF_MOVSX series.
Signed-off-by: Nicholas Dudar <main.kalliope@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/CAM1=_QS79dDBfaaNQXnWd61AqHd1M4o9aDMMiftnoJveNr=FZg@mail.gmail.com/
Link: https://lore.kernel.org/bpf/CAM1=_QTN3JJ6jtckf32F8wxBzLDbHSrzUttyMBWNqZKmRe=2rg@mail.gmail.com/
Link: https://patch.msgid.link/20260911213340.3767930-3-main.kalliope@gmail.com
|
|
Pull MIPS updates from Thomas Bogendoerfer:
- switch gpio code to use swnodes
- rework of TXX9 gpio code
- enable multi-vpe for econet
- cleanups and fixes
* tag 'mips_7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
mips: dts: econet: Describe dual-VPE 34Kc processor
mips: econet: add multi-vpe capability to EN751221
MIPS: ptrace: Fix syscall skipping via PTRACE_SYSCALL
mips: remove dead select
MIPS: BCM47XX: Convert buttons to software nodes
ssb: gpio: Add and register software node for GPIO controller
bcma: gpio: Add and register software node for GPIO controller
MIPS: ip22-gio: Drop #include of <linux/mod_devicetable.h>
MIPS: TXX9: Clean up txx9_iocled_init()
MIPS: TXX9: Convert gpio_txx9 to dynamic GPIO base allocation
MIPS: TXX9: Drop GPIOLIB_LEGACY select
MIPS: TXX9: Use GPIO lookup table for iocled LEDs
MIPS: TXX9: Reduce TXX9_IOCLED_MAXLEDS to 3
MIPS: TXX9: rbtx4927: Use GPIO lookup table for TXx9 LEDs
MIPS: TXX9: rbtx4927: Use GPIO lookup table for SIO DTR
MIPS: TXX9: Remove txx9_7segled_*() forward declarations
MIPS: TXX9: Remove tx4938_spi_init() and txx9_spi_init()
MIPS: kernel: proc: Use two seq_putc() calls in show_cpuinfo()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"GPIO core:
- extend the gpio-regmap abstraction layer with more features
allowing users to override configuration setting, translate
register values and masks and enable/disable interrupts
- extend GPIO kunit tests with suites verifying probe ordering by
software node devlink support and software node hogs
- shrink GPIO kunit initialization code
- coding style updates (remove commas from sentinels where
applicable)
- with all users now converted treewide to using real firmware node
links for software node GPIO lookup: remove the deprecated
label-matching mechanism from from GPIO core
- drop redundant return value check of nonseekable_open() in
gpiolib-cdev
- use IRQ trigger helpers where applicable
Driver updates:
- refactor error paths and logging in gpio-nomadik
- use more modern interfaces for getting resources in gpio-rockchip,
gpio-bt8xx and gpio-pca9570
- add missing MODULE_DEVICE_TABLE() to gpio-sifive and gpio-vf610
- drop unused FILONOFF macro from gpio-rcar
- extend build coverage of ioport GPIO drivers with COMPILE_TEST=y
- only enable the gpio-rtd driver by default with ARCH_REALTEK=y to
avoid bloating the build
- refactor coding style in several drivers
- use correct endianess translation in gpio-pcf85x
- add wake-up interrupt support to gpio-mvebu
- apply initial value in direction output setter in gpio-by-pinctrl
Misc:
- replace linux/gpio.h inclusions treewide with linux/gpio/legacy.h
which now exports all the deprecated APIs
- select GPIOLIB_LEGACY in Kconfig where required treewide
- use software nodes for gpio-keys in MFD drivers
Devicetree bindings:
- describe the realtek rtd1625 GPIO controller
- document new models for gpio-pca95xx and gpio-cadence
- document new property in gpio-rockchip"
* tag 'gpio-updates-for-v7.3-rc1-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (61 commits)
gpio: gpio-by-pinctrl: Apply initial value in direction output wrapper
dt-bindings: gpio: rockchip,gpio-bank: Add rockchip,grf property
gpio: Use IRQ trigger mask helpers
gpio: allow COMPILE_TEST for IOPORT drivers
gpio: realtek: Add driver for Realtek DHC RTD1625 SoC
gpio: regmap: Add IRQ enable/disable helpers
gpio: regmap: Add set_config callback
gpio: regmap: Add value_xlate callback
gpio: regmap: Add gpio_regmap_operation to extend reg_mask_xlate callback
gpio: regmap: Order kernel-doc descriptions with the actual appearance
gpio: regmap: Apply default resource callbacks for regmap IRQ chip
gpio: regmap: Provide default IRQ resource request and release callbacks
Revert "gpio: realtek: Add driver for Realtek DHC RTD1625 SoC"
gpib: gpio: replace linux/gpio.h inclusion
Input: matrix_keyboard - replace linux/gpio.h inclusion
phy: replace linux/gpio.h inclusions
pcmcia: replace linux/gpio.h inclusions
ASoC: replace linux/gpio.h inclusions
mfd: replace linux/gpio.h inclusions
sh: replace linux/gpio.h inclusions
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull treewide timer related cleanups from Thomas Gleixner:
- Remove the leftover CLOCK_TICK_RATE which has been scheduled for
removal more than a decade ago along with some now empty asm/timex.h
files.
- Consolidate delay timer calibration
The construct of having a define in a header requires that
architectures provided asm/timex.h for no reason. Also the function
name for reading the delay timer is confusing at best.
Use a config switch to enable that functionality and rename the
function to delay_read_timer() to make the purpose clear.
This removes some more now empty asm/timex.h files as well.
* tag 'timers-cleanups-2026-08-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
calibrate: Rework delay timer calibration
treewide: Remove CLOCK_TICK_RATE
x86: Use PIT_TICK_RATE instead of CLOCK_TICK_RATE
|
|
The contended_release tracepoint needs to hook queued_spin_unlock(), but
architectures with a custom unlock define queued_spin_unlock() directly,
leaving no single generic place to add the tracing.
Introduce queued_spin_release() as the arch-overridable release
primitive and make queued_spin_unlock() a generic wrapper around it.
An architecture that only customizes the release can then override
queued_spin_release() and inherit the generic wrapper.
Rename the MIPS override to queued_spin_release() accordingly. x86
paravirt overrides queued_spin_unlock() directly and is left unchanged.
No functional change intended.
Signed-off-by: Dmitry Ilvokhin <d@ilvokhin.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Juergen Gross <jgross@suse.com>
Link: https://patch.msgid.link/b8daabae6469ad72cc784a911f6cc43a6d45df3a.1785778551.git.d@ilvokhin.com
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/arnd/playground into gpio/for-next
gpio: legacy interface cleanups for 7.3
These are the remaining patches for legacy gpio interface
cleanup, ensuring that files referencing them are sure to
have CONFIG_GPIOLIB_LEGACY set, and use linux/gpio/legacy.h
instead of the old linux/gpio.h header.
There are a few more patches already merged in other
branches for 7.3, including soc, led, net and media. Once
everything is in, we can apply the final patches to turn
off CONFIG_GPIOLIB_LEGACY by default and remove the obsolete
header file.
This branch is based on the immutable ib-mfd-legacy-gpio-7.3
branch from mfd.git to avoid a conflict in the rohm drivers.
|
|
linux/gpio.h should no longer be used, convert these instead to
either linux/gpio/consumer.h or linux/gpio/legacy.h as needed.
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
That header doesn't use any device id provided by
<linux/mod_devicetable.h>. Also the users of <asm/gio_device.h> (i.e.
arch/mips/sgi-ip22/ip22-gio.c and drivers/video/console/newport_con.c)
don't use any of them and they compile fine in a mips allmodconfig.
So drop the unused include that only yields unnecessary recompilations
when a device id struct changes.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
The sole caller already uses dynamic GPIO base allocation, so drop
support for static allocation.
While at it, drop the no longer used "lowactive" parameter.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@oss.qualcomm.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Static allocation of GPIO base is deprecated, use dynamic allocation.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
The actual implementation was removed in commit 5a8df9281b052ff3 ("MIPS:
TXX9: Remove rbtx4939 board support").
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@oss.qualcomm.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
The last user of tx4938_spi_init() was removed in commit
21d638ef9483d8cf ("MIPS: TXX9: Remove rbtx4938 board support").
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@oss.qualcomm.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
This has been scheduled for removal more than a decade ago and the comments
related to it have been dutifully ignored. The last dependencies are gone.
Remove it along with various now empty asm/timex.h files.
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Reviewed-by: Christophe Leroy (CS GROUP) <chleroy@kernel.org>
Link: https://patch.msgid.link/20260410120317.910770161@kernel.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS fixes from Thomas Bogendoerfer.
* tag 'mips-fixes_7.2_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MIPS: configs: Enable the current Ingenic USB PHY symbol
MIPS: loongson64: add IRQ work based on self-IPI
MIPS: mm: Add check for highmem before removing memory block
mips: Add build salt to the vDSO
MIPS: DEC: Ensure RTC platform device deregistration upon failure
|
|
(headers)
<linux/mod_devicetable.h> is included in a many files:
$ git grep '<linux/mod_devicetable.h>' ef0c9f75a195 | wc -l
1598
; some of them are widely used headers. To stop mixing up different and
unrelated driver( type)s let the subsystem headers only use the subset
of the recently split <linux/mod_devicetable.h> that are relevant for
them.
The fallout (I hope) is addressed in the previous commits that handle
sources relying on e.g. <linux/i2c.h> pulling in the full legacy header
and thus providing pci_device_id.
Acked-by: Danilo Krummrich <dakr@kernel.org>
Acked-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://patch.msgid.link/199fe46b624ba07fb9bd3e0cd6ff13757932cb5f.1782808461.git.u.kleine-koenig@baylibre.com
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
|
|
Since the commit 91840be8f710 ("irq_work: Fix use-after-free in
irq_work_single() on PREEMPT_RT"), we observed the performance of
execve() is significantly impacted on MIPS.
While we are unsure how that commit caused the impact or how to improve
it (or even if it can be improved at all), implementing IRQ work with
self-IPI seems able to mitigate the impaction.
Perhaps this can/should be implemented for other MIPS architecture
processors as well, but we don't have the enough knowledge of them, nor
access to the hardware. So only implement it for loongson64 here.
Link: https://lore.kernel.org/6be1cdd5f91dd7418a32ff372a6f3ae259b19195.camel@xry111.site/
Signed-off-by: Xi Ruoyao <xry111@xry111.site>
Reviewed-by: Huacai Chen <chenhuacai@loongson.cn>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver updates from Greg KH:
"Here is the big set of staging driver updates for 7.2-rc1.
Nothing major in here, just constant grind of tiny cleanups and coding
style fixes and wrapper removals. Overall more code was removed than
added, always a nice sign that things are progressing forward.
Changes outside of drivers/staging/ was due to the octeon driver
changes, which for some reason also lives partially in the mips
subsystem, someday that all will be untangled and cleaned up, or just
removed entirely, it's hard to tell which is going to be its fate.
Other than octeon driver cleanups, in here are the usual:
- rtl8723bs driver reworking and cleanups, being the bulk of this
merge window given all of the issues and wrappers involved in that
beast of a driver
- most driver cleanups
- sm750fb driver cleanups (which might be done, as this really should
be moved to the drm layer one of these days...)
- other tiny staging driver cleanups and fixes
All of these have been in linux-next for many weeks with no reported
issues"
* tag 'staging-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (199 commits)
staging: most: video: avoid double free on video register failure
staging: sm750: rename CamelCase variable Bpp to bpp
staging: rtl8723bs: delete superfluous switch statement
staging: sm750fb: Mark g_noaccel, g_nomtrr and g_dualview as __ro_after_init
staging: rtl8723bs: propagate errno through hal xmit path
staging: rtl8723bs: propagate errno through xmit enqueue path
staging: rtl8723bs: convert rtw_xmit_classifier to return errno
staging: rtl8723bs: make rtw_xmit_classifier static
staging: rtl8723bs: simplify rtw_xmit_classifier control flow
staging: rtl8723bs: make _rtw_enqueue_cmd return 0 on success
staging: rtl8723bs: simplify rtw_enqueue_cmd control flow
staging: rtl8723bs: make _rtw_enqueue_cmd static
staging: rtl8723bs: simplify _rtw_enqueue_cmd control flow
staging: rtl8723bs: fix multiple blank lines in more hal/ files
staging: rtl8723bs: remove unused TXDESC_64_BYTES code
staging: rtl8723bs: remove unused DBG_XMIT_BUF and DBG_XMIT_BUF_EXT code
staging: rtl8723bs: fix multiple blank lines in hal/Hal* files
staging: rtl8723bs: fix multiple blank lines in hal/ files
staging: rtl8723bs: rtw_mlme: add blank line for readability
staging: rtl8723bs: rtw_mlme: wrap rtw_sitesurvey_cmd condition
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
- "taskstats: fix TGID dead-thread stat retention" (Yiyang Chen)
Fix a taskstats TGID aggregation bug where fields added in the TGID
query path were not preserved after thread exit, and adds a kselftest
covering the regression.
- "lib/tests: string_helpers: Slight improvements" (Andy Shevchenko)
Improve lib/tests/string_helpers_kunit.c a little
- "lib/base64: decode fixes" (Josh Law)
Address minor issues in lib/base64.c
- "selftests/filelock: Make output more kselftestish" (Mark Brown)
Make the output from the ofdlocks test a bit easier for tooling to
work with. Also ignore the generated file
- "uaccess: unify inline vs outline copy_{from,to}_user() selection"
(Yury Norov)
Simplify the usercopy code by removing the selectability of inlining
copy_{from,to}_user().
- "ocfs2: validate inline xattr header consumers" (ZhengYuan Huang)
Fix a number of possible issues in the ocfs2 xattr code
- "lib and lib/cmdline enhancements" (Dmitry Antipov)
Provide additional robustness checking in the cmdline handling code
and its in-kernel testing and selftests
- "cleanup the RAID6 P/Q library" (Christoph Hellwig)
Clean up the RAID6 P/Q library to match the recent updates to the
RAID 5 XOR library and other CRC/crypto libraries
- "ocfs2: harden inode validators against forged metadata" (Michael
Bommarito)
Add three structural checks to OCFS2 dinode validation so malformed
on-disk fields are rejected before ocfs2_populate_inode() copies them
into the in-core inode
- "lib/raid: replace __get_free_pages() call with kmalloc()" (Mike
Rapoport)
Clean up the lib/raid code by using kmalloc() in more places
* tag 'mm-nonmm-stable-2026-06-21-10-22' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (108 commits)
ocfs2: fix circular locking dependency in ocfs2_dio_end_io_write
ocfs2: fix NULL h_transaction deref in ocfs2_assure_trans_credits
lib: interval_tree_test: validate benchmark parameters
ocfs2: avoid moving extents to occupied clusters
treewide: fix transposed "sign" typos and update spelling.txt
ocfs2: fix UBSAN array-index-out-of-bounds in ocfs2_sum_rightmost_rec
fat: reject BPB volumes whose data area starts beyond total sectors
selftests/uevent: increase __UEVENT_BUFFER_SIZE to avoid ENOBUFS on busy systems
lib/test_firmware: allocate the configured into_buf size
fs: efs: remove unneeded debug prints
checkpatch: cuppress warnings when Reported-by: is followed by Link:
MAINTAINERS: add Alexander as a kcov reviewer
mailmap: update Alexander Sverdlin's Email addresses
fs: fat: inode: replace sprintf() with scnprintf()
ocfs2: fix out-of-bounds write in ocfs2_remove_refcount_extent
ocfs2: fix race between ocfs2_control_install_private() and ocfs2_control_release()
ocfs2/dlm: require a ref for locking_state debugfs open
ocfs2: reject FITRIM ranges shorter than a cluster
ocfs2: validate fast symlink target during inode read
ocfs2: add journal NULL check in ocfs2_checkpoint_inode()
...
|
|
Pull MIPS updates from Thomas Bogendoerfer:
- use software nodes for GPIO code
- cleanups and fixes
* tag 'mips_7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (41 commits)
mips: select legacy gpiolib interfaces where used
MIPS: lib: Remove '.hidden' for local symbols
MIPS: VDSO: Avoid including .got in dynamic segment
MIPS: smp: report dying CPU to RCU in stop_this_cpu()
MIPS: kernel: proc: Delete unnecessary braces in show_cpuinfo()
MIPS: kernel: proc: Use seq_putc() calls in show_cpuinfo()
mips: sched: Fix CPUMASK_OFFSTACK memory corruption
MIPS: mm: Fix out-of-bounds write in maar_res_walk()
MIPS: ath79: reduce ARCH_DMA_MINALIGN
mips: dts: ar9132: fix wdt node name
mips: Remove remaining defconfig references to the pktcdvd driver
MIPS: mm: remove comment referring to removed CONFIG_MIPS_CMP
MIPS: alchemy: db1300: switch to static device properties
MIPS: alchemy: gpr: switch to static device properties
MIPS: alchemy: db1000: use nodes attached to GPIO chips in properties
MIPS: alchemy: mtx1: attach software nodes to GPIO chips
MIPS: alchemy: provide visible function prototypes to board files
MIPS: alchemy: platform: add missing include
MIPS: ip22-gio: do not export device release function
MIPS: ip22-gio: switch to dynamic root device
...
|
|
Currently, ath79 SoCs use the default ARCH_DMA_MINALIGN value of 128
bytes defined in mach-generic. This is excessive for these platforms
and leads to significant memory waste in kmalloc.
Override ARCH_DMA_MINALIGN to use L1_CACHE_BYTES, which is 32 bytes for
ath79 SoCs.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
The kernel allows arches to select between inline and outline
implementations of the copy_{from,to}_user() by defining individual
INLINE_COPY_FROM_USER and INLINE_COPY_TO_USER, correspondingly. However,
all arches enable or disable them always together.
Without the real use-case for one helper being inlined while the other
outlined, having independent controls is excessive and error prone.
Switch the codebase to the single unified INLINE_COPY_USER control.
Link: https://lore.kernel.org/20260425020857.356850-3-ynorov@nvidia.com
Signed-off-by: Yury Norov <ynorov@nvidia.com>
Tested-by: Alice Ryhl <aliceryhl@google.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christophe Leroy (CS GROUP) <chleroy@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Viktor Malik <vmalik@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Convert "5way switch" gpio-keys device and smsc911x ethernet controller
to use static device properties instead of bespoke platform data
structures for configuration.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
[Bartosz: use platform_device_info::swnode]
Tested-by: Manuel Lauss <manuel.lauss@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
GPIO subsystem is switching the way it locates GPIO chip instances for
GPIO references in software nodes from matching on node names to
identity matching, which necessitates assigning firmware nodes
(software nodes) to GPIO chips.
Move the node definitions for alchemy-gpio1 and alchemy-gpio2 to
arch/misp/alchemy/common/gpiolib.c, register them there, and attach
them to gpio_chip instances. Adjust MTX1 board file to use these nodes.
Note that because nodes need to be registered before they can be used in
PROPERTY_ENTRY_GPIO() we have to do the registration at
postcore_initcall level, otherwise (due to the link order) MTX1 board
initialization code will run first.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
[Bartosz: use platform_device_info::swnode]
Tested-by: Manuel Lauss <manuel.lauss@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
There is no need to export the gio device release function as the
devices are reference counted.
Drop the export along with the unused inline wrapper.
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Currently, Ralink SoCs use the default ARCH_DMA_MINALIGN value of 128
bytes defined in mach-generic. This is excessive for these platforms
and leads to significant memory waste in kmalloc.
Override ARCH_DMA_MINALIGN to use L1_CACHE_BYTES, which is 16 bytes for
RT288X and 32 bytes for other Ralink SoCs.
Signed-off-by: Qingfang Deng <qingfang.deng@linux.dev>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
In 64-bit configurations calling any firmware entry points from a kernel
thread other than the initial one will result in a situation where the
stack has been placed in the XKPHYS 64-bit memory segment.
Consequently the stack pointer is no longer a 32-bit value and when the
32-bit firmware code called uses 32-bit ALU operations to manipulate the
stack pointer, the calculated result is incorrect (in fact in the 64-bit
MIPS ISA almost all 32-bit ALU operations will produce an unpredictable
result when executed on 64-bit data) and control goes astray.
This may happen when no final console driver has been enabled in the
configuration and consequently the initial console continues being used
late into bootstrap, or with an upcoming change that will switch the zs
driver to use a platform device, which in turn will make the console
handover happen only after other kernel threads have already been
started, and the kernel will hang at:
pid_max: default: 32768 minimum: 301
or somewhat later, but always before:
cblist_init_generic: Setting adjustable number of callback queues.
has been printed.
It seems that only the prom_printf() entry point is affected. Of all
the other entry points wired only rex_slot_address() and rex_gettcinfo()
are called from a kernel thread other than the initial one, specifically
kernel_init(), and they are leaf functions that do no business with the
stack, having worked with no issue ever since 64-bit support was added
for the platform back in 2002.
To address this issue then, arrange for the stack to be switched in the
o32 wrapper as required for prom_printf() only, by supplying call_o32()
with a pointer to a chunk of initdata space, which is placed in the
CKSEG0 32-bit compatibility segment, observing that prom_printf() is
only called from console output handler and therefore with the console
lock held, implying no need for this code to be reentrant.
Other firmware entry points may be called with interrupts enabled and no
lock held, and may therefore require that call_o32() be reentrant. They
trigger no issue at this point and "if it ain't broke, don't fix it," so
just leave them alone.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Cc: stable@vger.kernel.org # v2.6.12+
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Remove a bunch of compilation warnings for halt/reset handlers:
arch/mips/dec/reset.c:22:17: warning: no previous prototype for 'dec_machine_restart' [-Wmissing-prototypes]
22 | void __noreturn dec_machine_restart(char *command)
| ^~~~~~~~~~~~~~~~~~~
arch/mips/dec/reset.c:27:17: warning: no previous prototype for 'dec_machine_halt' [-Wmissing-prototypes]
27 | void __noreturn dec_machine_halt(void)
| ^~~~~~~~~~~~~~~~
arch/mips/dec/reset.c:32:17: warning: no previous prototype for 'dec_machine_power_off' [-Wmissing-prototypes]
32 | void __noreturn dec_machine_power_off(void)
| ^~~~~~~~~~~~~~~~~~~~~
arch/mips/dec/reset.c:38:13: warning: no previous prototype for 'dec_intr_halt'
[-Wmissing-prototypes]
38 | irqreturn_t dec_intr_halt(int irq, void *dev_id)
| ^~~~~~~~~~~~~
(which get promoted to compilation errors with CONFIG_WERROR), by moving
the local prototypes from arch/mips/dec/setup.c to a dedicated header
for arch/mips/dec/reset.c to use as well. No functional change.
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
As from commit 8f99a1626535 ("MIPS: Tracing: Add IRQENTRY_EXIT section
for MIPS") do_IRQ() is not a macro anymore and can be invoked directly
from assembly code again, however its `asmlinkage' annotation has never
been brought back from the previous removal of the function with commit
187933f23679 ("[MIPS] do_IRQ cleanup").
Since calling the function directly from assembly code has a performance
advantage, add the annotation back so that the DEC platform can make use
of this again.
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
We need the driver-core fixes in here as well to build on top of.
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
"struct class" is defined earlier on both cases.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Link: https://patch.msgid.link/6d5937c5-9d41-4cfe-9e42-0946e12dc72d@p183
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
On real hardware, panic and machine reboot may not flush hardware cache
to memory. This means the persistent ring buffer, which relies on a
coherent state of memory, may not have its events written to the buffer
and they may be lost. Moreover, there may be inconsistency with the
counters which are used for validation of the integrity of the
persistent ring buffer which may cause all data to be discarded.
To avoid this issue, stop recording of the ring buffer on panic and
flush the cache of the ring buffer's memory.
Fixes: e645535a954a ("tracing: Add option to use memmapped memory for trace boot instance")
Cc: stable@vger.kernel.org
Cc: Will Deacon <will@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Ian Rogers <irogers@google.com>
Link: https://patch.msgid.link/177751969602.2136606.12031934362587643488.stgit@mhiramat.tok.corp.google.com
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
The Linux kernel coding style discourages the use of typedefs for
structs. Convert cvmx_pip_port_status_t to a plain 'struct
cvmx_pip_port_status' and update all users across the MIPS Octeon
architecture code and the staging driver.
No functional change.
Signed-off-by: Eric Wu <kunjinkao.jp@gmail.com>
Link: https://patch.msgid.link/20260427155427.668540-8-kunjinkao.jp@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The Linux kernel coding style discourages the use of typedefs for
structs. Convert cvmx_pko_port_status_t to a plain 'struct
cvmx_pko_port_status' and update all users across the MIPS Octeon
architecture code and the staging driver.
No functional change.
Signed-off-by: Eric Wu <kunjinkao.jp@gmail.com>
Link: https://patch.msgid.link/20260427155427.668540-7-kunjinkao.jp@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The Linux kernel coding style discourages the use of typedefs for
enums. Convert cvmx_pko_status_t to a plain 'enum cvmx_pko_status' and
update all users across the MIPS Octeon architecture code and the
staging driver stubs.
No functional change.
Signed-off-by: Eric Wu <kunjinkao.jp@gmail.com>
Link: https://patch.msgid.link/20260427155427.668540-6-kunjinkao.jp@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|