| Age | Commit message (Collapse) | Author |
|---|
|
Pull xtensa updates from Max Filippov:
- fix clk reference leak in calibrate_ccount
- small fixes in comments
* tag 'xtensa-20261027' of https://github.com/jcmvbkbc/linux-xtensa:
xtensa: time: Fix clk reference leak in calibrate_ccount()
xtensa: fix typos in comments
xtensa: atomics: drop kernel-doc comments
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- "selftests/mm: improve khugepaged coverage" (Kiryl Shutsemau):
Give khugepaged a proper workout. Extend the tests to all supported
mTHP orders, check exactly which windows collapsed, and make scan
completion deterministic. Race collapse against faults, pinning, fork
and remap; verify that the contents survive.
Add coverage for whole-page-table zaps and memory pressure too.
- "selftests/mm: separate GUP microbenchmarking from functional testing"
(Sarthak Sharma):
Untangle GUP benchmarking from correctness testing. Move the
benchmark into tools/mm, add a standalone harness-based GUP selftest,
and move shared helpers into tools/lib/mm. Give each tool one job
instead of mixing timing measurements with correctness checks.
Cover the mapping, pinning and batch-size combinations explicitly.
- "mm: Switch device DAX to section-based vmemmap optimization" (Muchun
Song):
Apply section-based vmemmap optimization to device DAX. Rework the
backing metadata layout to save memory while preserving the handling
of device memory hotplug and its different alignment and lifetime
requirements.
- "mm: Introduce section-based vmemmap optimization for HugeTLB"
(Muchun Song):
Cut the memory consumed by HugeTLB's struct page array with
section-based vmemmap optimization. Arrange the metadata so large
huge pages need fewer backing pages, while keeping initialization,
teardown and the various hugepage configurations straight.
- "mm/huge_memory: clean up and decouple the anon and file split
helpers" (Kairui Song):
Separate anonymous and file-backed folio splitting, which have rather
different locking and bookkeeping requirements. Move the work into
separate helpers, drop dead checks and tidy swap-cache handling. Fix
error paths, including one that could leave a folio frozen.
Keep the swap cache cases separate from file-cache splitting.
- "mm: Unconditional per-VMA locks and cleanups" (Dave Hansen):
Make per-VMA locking unconditional and clean up the old conditional
code around it. This removes configuration-dependent plumbing and
lets callers depend on one locking model rather than carrying both
cases along.
- "memcg: remove the v1 soft limit" (Shakeel Butt):
Remove the old cgroup v1 memory soft-limit machinery. This has long
since been superseded by the newer memory-control interfaces; hauling
around a separate reclaim scheme for it no longer buys us much.
- "read proc/pid/smaps_rollup under per-vma lock" (Suren Baghdasaryan):
Read /proc/PID/smaps_rollup using per-VMA locks where possible,
rather than holding mmap_lock across the entire walk. Retain the
contention fallback and add tearing tests. This considerably reduces
latency when another thread is busy changing its mappings.
- "mm/damon: introduce data access-as-a-data attribute" (SJ Park):
Teach DAMON to expose memory access observations as data attributes,
making them available to the probe and filtering machinery. Extend
the interfaces, documentation and tests so the new information can be
used rather than merely collected.
- "Remove PG_private by using page/folio->private checks instead" (Zi
Yan):
Get rid of PG_private and use the folio's private pointer to say
whether private data is attached. Convert the filesystem users,
including erofs, f2fs and md, and clean up the old accessors and
flags. There are a few special cases, notably swapcache and hugetlb,
which need explicit care.
- "mm: make userland page table freeing RCU-safe" (Lorenzo Stoakes):
Make freeing userspace page tables safe against RCU readers. Sort out
the page-table lifetime and locking rules so walkers cannot stumble
over freed tables while mappings are being torn down.
- "make unused huge shrinker memcg aware" (Qi Zheng):
Make shmem's unused-huge-folio shrinker aware of memory cgroups, so
reclaim can find those folios under the right memcg. Wire up the
per-memcg tracking and its lifetime rules, and give the shrinklist
its own lockdep class to avoid spurious dependency reports.
- "mm: Drop pxd_ERROR()" (Anshuman Khandual):
Remove the old pxd_ERROR() page-table checks and their
architecture-specific baggage. Simplify the common page-table
interfaces and callers now that these checks no longer serve a
useful purpose.
- "memcg: group struct fields by access pattern" (Shakeel Butt):
Rearrange memcg's hot and cold fields according to how they're
actually accessed. Keep frequently updated counters and their
neighboring state from fighting over cachelines and reduce needless
cacheline traffic.
- "mm/damon/core: fix the size charged for a filter-trimmed region"
(Donggeun Yoo):
Fix DAMOS quota accounting when a filter trims a monitoring region.
Charge only the part left after filtering, not the original region,
and add KUnit coverage. Previously the excluded memory could eat into
the quota and make schemes run more slowly than requested.
- "mm/damon: add kunit and selftests for probes and probe weights" (SJ
Park):
Add more tests for DAMON probes and their weights, including
validation and the results reported to userspace. This is mostly
about catching regressions in the newer probe infrastructure before
they become harder to diagnose.
- "mm: memcontrol: constify the read side of the read side of the memcg
API" (Tal Zussman):
Mark the read-only parts of the memcg interface const, from folio and
lruvec accessors to counters and swap helpers. Most of this is
mechanical, but it makes the contracts clearer and lets the compiler
catch accidental writes.
- "mm/damon/vaddr: support {prep,apply}_probes" (SJ Park):
Support the new prepare/apply probe operations in DAMON's
virtual-address backend. This brings vaddr monitoring into line with
the probe infrastructure and makes the added probe types useful there
too.
- "mm/mglru: clean up folio counters and flag usage" (Kairui Song):
Simplify MGLRU's folio counters and flag handling. Remove redundant
accounting paths and make the state transitions easier to follow
without changing the intended reclaim policy.
- "arch, mm/execmem: resolve confusion about set_direct_map_valid_noflush()"
(Mike Rapoport (Microsoft)):
Clarify and straighten out the set_direct_map_valid_noflush()
interface across architectures and execmem. Make the requested
mapping changes and the callers' expectations agree, rather than
relying on subtly different architecture behavior.
- "mm: zswap: free cold writeback folios promptly" (Alexandre Ghiti):
Free zswap writeback folios as soon as their disk write completes.
They are cold temporary buffers, so putting them on the LRU only
makes reclaim rediscover them later. Extend swap-cache dropbehind and
let zswap keep these folios off the LRU altogether.
- "mm: gup: cleanup gup_fast call chain" (Aristeu Rozanski):
Clean up the GUP-fast call chain and simplify how the fast-path
helpers pass their arguments and results around. Keep the page-pin
behavior the same while making the call sequence easier to maintain.
- "mm: optimize zone-device memmap initialization" (Li Zhe):
Speed up initialization of zone-device struct pages. Avoid redundant
work when setting up large device-memory ranges, where touching every
descriptor can get expensive.
- "mm/zswap: shrink zswap_entry via a pool id" (Jianyue Wu):
Reduce the size of zswap_entry by storing a compact pool identifier
instead of a full pointer. Keep the pool lookup and lifetime handling
correct while saving per-entry metadata.
- "mm/damon: support access monitoring of hugetlb-backed memory"
(Krishna Iyer):
Let DAMON monitor hugetlb-backed memory too. Extend the relevant
access checks and add coverage so those mappings no longer fall
through a hole in the monitoring machinery.
- "mm/execmem: fixes and cleanups for the ROX cache" (Mike Rapoport):
Tidy execmem's read-only-executable cache and fix its handling of the
awkward allocation and release cases. The aim is to make the cache's
ownership and permission transitions more predictable.
- "zsmallc: remove old object read API" (Sergey Senozhatsky):
Drop zsmalloc's old object-read API and move its remaining users to
the supported access mechanism. This removes a duplicate interface
which we no longer need.
- "mm/mempolicy: stop copying state in the interleave paths" (Gregory
Price):
Stop copying mempolicy state in the interleave paths when a reference
to the existing policy will do. This avoids extra work and makes the
ownership rules less obscure.
- "mm/mglru: speed up inc_min_seq() and fix cold/hot inversions" (Barry
Song):
Make MGLRU's generation advancement cheaper and fix cases where cold
and hot folios end up in the wrong order. Adjust the counter and list
handling so reclaim doesn't keep passing over the better eviction
candidates.
- "mm: Fix MF_DELAYED handling on memory failure" (Lisa Wang):
Treat MF_DELAYED as a partially completed memory-failure operation,
not an outright failure. Propagate that result correctly through
shmem and the generic handler, fix the extra-reference accounting,
and add tests for the resulting SIGBUS behavior.
- "tools/mm/page_owner_sort: fix --sort, add module filter, improve
usage" (Ye Liu):
Fix page_owner_sort's --sort handling, add module-based filtering and
make the usage output more helpful. This makes the tool less
frustrating when tracking down who is holding on to pages.
- "mm/damon: move damos filter range arguments validation to core" (SJ
Park):
Move DAMOS filter range validation into the core, where all callers
can share it. Also close the sysfs read-twice races which could pass
inconsistent ranges, and add tests for invalid input.
- "mm/damon: misc cleanups" (Zenghui Yu):
Clean up a collection of small DAMON rough edges in the core,
interfaces and tests. No large behavior change here, just simpler
code and fewer opportunities for confusion.
- "mm/damon: cleanup code, add test cases, and update guidances in
docs" (SJ Park):
Clean up DAMON's core and interfaces, add missing test cases and
bring the documentation into line with the code. These changes should
make the newer facilities easier to understand and maintain.
- "mm/damon: introduce hugepage_size probe filter" (SJ Park):
Add a DAMON probe filter for hugepage size. Let users select a range
of folio sizes through sysfs, validate the range and document the new
interface, so monitoring can concentrate on memory backed by the
desired hugepage sizes.
- "selftests/mm: pagemap_ioctl test fixes and cleanups" (Zenghui Yu):
Fix some pagemap ioctl test assumptions and clean up their setup and
reporting. Make failures point to the operation that went wrong
rather than to test harness bookkeeping.
- "mm: avoid large folio splits when swap is unavailable" (Johannes
Weiner):
Avoid splitting large folios merely to attempt swap when no swap
space is available. There is little point paying for an expensive
split when reclaim cannot actually swap the resulting pages out.
- "mm: workingset: fix the shadow node budget under MGLRU" (Hui Zhu):
Fix the workingset shadow-node budget with MGLRU enabled. Keep the
shadow entries within the intended limits so refault tracking does
not quietly consume more metadata than it should.
- "selftests/mm: TAP output and global-state fixes" (Song Hu):
Fix selftests which produce misleading TAP output or fail to restore
global settings after a run. A test ought to leave the system as it
found it, particularly when a whole suite follows behind.
- "mm: remove page_swap_entry()" (Tal Zussman):
Remove page_swap_entry() and convert its remaining users to the folio
and swap-entry helpers. Lose an old page-level interface and make the
swap paths a little more consistent.
- "mm: refactor zonelist constructors and iterators" (Gregory Price):
Refactor the zonelist construction and walk helpers to reduce
duplicated logic. Keep the allocation ordering rules intact while
making it clearer how zones are selected.
- "mm: kmemleak: batch the struct page scan" (Breno Leitao):
Scan adjacent struct pages in batches instead of taking kmemleak_lock
once for every single page. This preserves scan coverage and the
lock-hold bound, while cutting overhead substantially on debug
kernels.
- "mm/damon: misc improvements in tests and documents" (Zenghui Yu):
Fix some DAMON selftests which leave kdamond running or fail under
Python safe-path mode, and improve the KUnit coverage and
documentation. Nothing especially glamorous, but these are worth
doing.
- "mm/damon: introduce probe_hits_wsum DAMOS core filter" (SJ Park):
Add a DAMOS core filter using weighted probe-hit counts. This gives
schemes another way to select regions based on what the monitoring
probes observed.
- "mm/mglru: fix ineffective memory protection for non-kswapd reclaim"
(Ridong Chen):
Fix MGLRU's memory protection handling for reclaim outside kswapd.
The protection settings weren't having the intended effect in these
paths, leaving protected memory more exposed than requested.
- "mm/damon: improve readability, clarity and test coverage" (SJ Park):
Simplify a handful of DAMON core helpers, clarify their behavior and
expand test coverage. There are no intended userspace-visible changes
in this batch.
- "mm: replace PF_KCOMPACTD/PF_KSWAPD with kthread_func()" (Kefeng
Wang):
Stop identifying reclaim and compaction workers through the PF_KSWAPD
and PF_KCOMPACTD task flags. Use their kthread functions instead and
remove the redundant flag plumbing.
- "mm/hugetlb: fix surplus accounting and availability checks during
demotion" (Longlong Xia):
Fix HugeTLB surplus accounting and availability checks when demoting
huge pages. Keep the counters and reservation decisions consistent as
one huge page turns into several smaller ones.
- "mm/damon: add kunit tests for probe_hits handling and probe params
validation" (Jason Angelov):
Add KUnit tests for DAMON probe-hit handling and invalid probe
parameters. These cover edge cases that were too easy to miss in
ordinary monitoring tests.
- "mm/damon: fix misc bugs in kunit, quota goals and sysfs refresh_ms"
(SJ Park):
Fix a few DAMON bugs in KUnit tests, quota-goal handling and the
sysfs refresh interval. Small fixes, but the incorrect results and
control behavior were real.
- "mm: zswap: optimize zswap invalidate and store" (Kefeng Wang):
Simplify zswap's invalidate and store paths to avoid avoidable
lookups and work. Keep the entry lifetime rules intact while making
those frequent operations cheaper.
- "mm: replace custom ratelimiting logic" (Pedro Falcato):
Replace hand-rolled MM rate limiting with the common kernel helpers.
There is no need to maintain another local version of the same
mechanism.
- "mm/vmalloc: minor cleanups" (Ye Liu):
Tidy some vmalloc initialization and reporting code, and pull
duplicated vmap-area insertion work into a helper. No functional
changes are intended.
- "mm/mglru: clean up isolate_folios for readability and clarity"
(Ridong Chen):
Clean up MGLRU's isolate_folios() so the decisions are easier to read
and verify. Keep reclaim behavior unchanged while removing
unnecessary twists in the control flow.
- "Catch automatic storage in IDA and Maple Tree definitions" (Yury
Norov):
Catch IDA and maple-tree definitions placed in automatic storage
where the lifetime rules are wrong or easy to get wrong. Add checks
so such mistakes are harder to slip through unnoticed.
- "mm, swap: some random fixes and cleanups" (Kemeng Shi):
Fix and simplify a few unrelated swap paths, removing redundant work
and tidying up error handling. A small collection of things which
were better fixed than left lying around.
- "mm/page_io: folio conversion cleanups" (Tal Zussman):
Finish some page-to-folio conversions in swap I/O, removing obsolete
wrappers and using folio operations consistently. The I/O behavior is
intended to remain the same.
- "mm/swap: skip empty clusters in the swapoff scan" (Youngjun Park):
Skip empty swap clusters during swapoff instead of walking slots
which have nothing to release. This avoids pointless work on sparsely
used swap devices.
- "mm: trace: decode architecture-specific VMA flags" (Meijing Zhao):
Teach the VMA trace output to decode architecture-specific flags,
rather than leaving them as unexplained bits. That should make
tracing a good deal more useful when debugging unusual mappings.
- "mm, swap: don't spin on a bad swap entry" (Breno Leitao):
Stop repeatedly retrying a swap entry which is already known to be
bad. Make the error path terminate cleanly instead of wasting CPU
chasing an entry that cannot be used.
- "mm/page_isolation: fix UBSAN shift-out-of-bounds in
isolate_single_pageblock" (Qi Xi):
Fix an out-of-range shift in isolate_single_pageblock() and tighten
its associated boundary handling. UBSAN found the issue; the result
should be more robust pageblock isolation.
- "mm: khugepaged: fix tracepoint UAF" (Vernon Yang):
Fix a use-after-free in khugepaged tracepoint handling. Make sure the
information recorded by tracing stays valid for as long as the trace
event needs it.
- "mm/damon: fix DAMOS bugs in core, paddr and vaddr" (SJ Park):
Fix several DAMOS problems across the core and physical- and
virtual-address backends. The changes close error cases and bring the
implementations back into agreement.
- "mm/hugetlb_cgroup: move the per-node usage along with the folio"
(Hongfu Li):
Move HugeTLB per-node usage accounting when folios migrate between
nodes or are reparented to another cgroup. Otherwise numa_stat can
retain stale charges and even underflow when the folio is freed.
- "docs/core-api: memory-allocation: add k[mz]alloc_obj() and clarify
kmalloc" (Mike Rapoport):
Document the typed k[mz]alloc_obj() allocation helpers and clear up
some kmalloc guidance. Make it easier for callers to choose the right
interface.
- "selftests/mm: Validate selections and scope memfd_secret setup"
(Tianyi Chen):
Check selftest selections before running and confine memfd_secret
setup to the cases that actually need it. Avoid confusing failures
caused by the test harness itself.
- "mm/damon: move zero damos quota target_value handling to the core
layer" (SJ Park):
Handle a zero DAMOS quota goal target in the core rather than making
each user of the interface invent its own rule. Keep quota decisions
consistent across callers.
- "mm/damon: Introduce a huge page collapsing mechanism using auto
tuning" (Asier Gutierrez):
Add an auto-tuned DAMON mechanism for collapsing huge pages. Use
monitoring feedback to decide when collapse is worthwhile rather than
forcing one fixed policy onto every workload.
- "kmemleak: fix stale documentation and raise the verbose default"
(Breno Leitao):
Bring the kmemleak documentation up to date and require a third
confirming scan before verbose kernels print a suspected leak. The
extra scan helps suppress transient false positives in noisy debug
builds.
- "mm/memory: improve insert_pages() error handling" (Avi Weiss):
Tighten insert_pages() error handling so partial failures are
reported and cleaned up consistently. The caller should not have to
guess how far the operation got.
- "mm/damon: allow NULL or unstarted damon_ctx parameter for
damon_call()" (SJ Park):
Make damon_call() handle NULL and not-yet-started contexts safely.
Simplify the rules for callers and avoid an indefinite wait on an
invalid state.
- "mm/damon: introduce pgidle_set probe filter type" (SJ Park):
Add a pgidle_set DAMON probe filter, giving monitoring users another
way to select pages by their idle-tracking state. Wire it through the
filter interfaces and tests.
- "mm/damon/core: remove unused helper functions" (Cheng-Han Wu):
Remove DAMON core helpers which no longer have callers. Keep the API
surface smaller rather than retaining dead code just in case.
- "mm: stop calling pmd_folio() on special PMDs" (Gregory Price):
Avoid calling pmd_folio() on special PMD mappings that have no struct
page. The old assumption could fault in procfs walkers; use the
normal-folio checks and handle those mappings properly.
- "mm: remove three unused helpers from mm.h" (Tal Zussman):
Remove three unused helpers from mm.h. Fewer obsolete interfaces for
the next person to stumble over.
- "mm/damon: improvements in efficiency, error handling, documents"
(Liew Rui Yan):
Skip needless DAMOS quota work once the quota is full, propagate a
missing sysfs error and tidy a couple of comments. The ignored error
could make a monitoring-start request appear successful when it
wasn't.
- "docs/mm/damon/design: add explanation of nr_snapshots" (Liew Rui
Yan):
Explain DAMON's nr_snapshots accounting in the design documentation
and straighten out the associated terminology. Make it clearer what
users should expect from that counter.
- "selftests/cgroup: fixes for test_zswap on single core VM" (Wilson
Felipe Pereira):
Fix two test_zswap failures on single-CPU VMs. Wait for the exiting
child's cgroup to become unpopulated before reconfiguring it, and
avoid another test assumption which breaks under constrained
scheduling.
- "docs/ksm: fix advisor documentation and comment" (Jinjiang Tu):
Correct the KSM advisor documentation and a misleading code comment.
Keep the description aligned with how the advisor actually works.
- "Fix bugs in HugeTLB allocation when mem_cgroup_charge_hugetlb()
fails" (Ackerley Tng):
Fix HugeTLB allocation cleanup when the memcg charge fails. Make sure
failure exits undo what was allocated rather than leaving stale
accounting or resources behind.
- "mm, memcg: fix memory.peak reset clobbering other fds' watermark"
(Ridong Chen):
Fix memory.peak reset handling so resetting one file descriptor
doesn't overwrite the watermark kept for another. Keep those per-open
measurements independent as intended.
- "mm: reject zone device folios in more folio walkers" (Gregory
Price):
Reject zone-device folios in page walkers that cannot safely handle
them. Extend the existing checks rather than assuming every folio has
ordinary system-memory backing.
- "percpu: remove code with no effect" (Sang-Heon Jeon):
Remove a few pieces of percpu code which no longer do anything. There
is no reason to keep maintaining dead paths.
* tag 'mm-stable-2026-10-19-21-33' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (539 commits)
mm: shmem: assign a lock class to the unused huge shrinklist
mm: vmscan: put rotation-missed folios at the LRU tail
mm: kmemleak: scan the struct page array in MAX_SCAN_SIZE batches
mm: kmemleak: move the struct page scan into a helper
mm/damon: document that a zero sample_interval is accepted
mm/damon: fix typos in comments
mm/damon/sysfs: propagate damon_call() error in turn_damon_on
mm/damon/core: skip quota score setup when the quota is full
mm/damon/tests/core-kunit: test the size charged for a filter-trimmed region
mm/damon/core: charge only the part of a region the filter left
mm: disallow raw PFN mappings of huge/shared zeropage
selftests/mm: zap whole PTE tables in the khugepaged race harness
selftests/mm: add memory-pressure threads to the khugepaged race harness
selftests/mm: race the collapse of windows with holes
selftests/mm: add khugepaged race harness
selftests/mm: check that one khugepaged pass collapses one window
selftests/mm: run every supported collapse order by default
selftests/mm: cover a shared-source collapse write race
selftests/mm: parameterize the mixed-source collapse case by source order
selftests/mm: add order-parameterized khugepaged collapse cases
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux
Pull Kbuild / Kconfig updates from Nathan Chancellor:
"Kbuild:
- Suppress compiler flags in debug info for external module builds
- Use '-fmacro-prefix-map' in more places in the build
- Merge initial set of changes from Lorenzo's speed up series, along
with some fixes found through testing:
- Avoid allocating .modinfo in vmlinux
- Speed up kallsyms by indexing symbols by token and outputting
binary data to disk directly then including in assembly via
.incbin
- Don't sort $(NM) output when unnecessary
- Only emit relocations on the final vmlinx link
- Reimplement mksysmap in C
- Move many cc-option and ld-option calls into the Kconfig stage to
cache their results
- Use pigz for gzip compression when available
- Move gen_init_cpio and gen_initramfs.sh from usr/ to scripts/
- Add a TOML configuration to scripts/container and update
documentation accordingly
- Add a generic, opt-in mechanism for checking that headers can
compile standalone
- Update machine function splitting argument for LLVM 24 rename in
AutoFDO build
- Miscellaneous minor clean ups, fixes, and hardening, mostly
found/fixed via LLMs
Kconfig:
- Turn recursive ranges into an error
- Fix savedefconfig for defaults that were adjusted for being out of
range and revert a previously applied workaround
- Improvements and hardening around integer and hexadecimal values
- Emit a warning when selecting or implying a choice symbol, which
has no effect
- Emit a warning when KCONFIG_PROBABILITY is malformed
- Introduce def_string / def_int / def_hex to mirror the existing
def_bool / def_tristate to succinctly set a value and type at the
same time.
- Add cc-option-str and ld-option-str macros to act like Kbuild's
cc-option and ld-option, returning the string when the option is
supported, allowing many checks to be moved into Kconfig
- Minor usability improvements to Kconfig tests"
* tag 'kbuild-7.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux: (59 commits)
kbuild: AutoFDO: Update split machine function argument for upstream rename
kbuild: Mark the initcall ordering recipe as recursive
kbuild: Mark the gzip recipes as recursive
localmodconfig: Explicitly report boolean configs during integrity check
scripts/make_fit: Ignore schema checks when decomposing DTBs
clang-tools: Import os for broken pipe handling
kconfig: use the value argument in sym_get_near_range_bound()
kconfig: fix infinite loop in conf_choice() when no choice value is visible
kconfig: cleanup stale comment about 'keys' array
kconfig: Improve ergonomics around disabling warnings with cc-option
scripts/Kconfig.toolchain: Drop compiler symbols from dependencies
checkkconfigsymbols.py: Parse Git status output line by line
gen_init_cpio: stop parsing on lines with a missing argument list
.gitignore: drop Module.markers
.gitignore: ignore pacman package signatures
kbuild: add header check facility as a manually run static analyzer
Documentation: dev-tools: refer to user ID rather than id
Documentation: dev-tools: update container.rst with config file
scripts: add TOML config to container tool
kconfig: tests: {old,save}defconfig: Forward dynamic keyword arguments
...
|
|
Xtensa has no two-byte atomic compare and swap, so the __cmpxchg()
switch lets case 2 fall through to __cmpxchg_called_with_bad_pointer(),
which is declared but never defined, so a two-byte cmpxchg() fails
at link time.
Route case 2 through the new cmpxchg_emu_u16(), which takes the
old and new values as unsigned long and narrows them itself, so
the call needs no extra casts.
Signed-off-by: Bradley Morgan <brads@mainlining.org>
Reviewed-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
Since commit 48ebe1cbbeb51 ("kbuild: compress the kernel with pigz if
available"), cmd_gzip runs pigz through scripts/jobserver-exec, which
takes the job slots make has free. GNU Make passes the jobserver pipe
only to recipes it treats as recursive, but leaves --jobserver-auth in
MAKEFLAGS for all of them. The make 4.3 in CentOS Stream 9 also hides
the pipe in sub-makes (a backport of the fix for GNU Make bug 58232), so
jobserver-exec cannot open it, runs pigz on one thread, and prints:
WARNING: Unable to reopen jobserver read-side pipe: FileNotFoundError(2, 'No such file or directory')
Mark every recipe that can run cmd_gzip as recursive with "+", as
commit ecab4115c44cc ("kbuild: mark `rustc` (and others) invocations as
recursive") did for rustc. Besides the $(call if_changed,gzip) rules,
this covers those that choose gzip through a variable: the built-in
initramfs in usr/Makefile (which rcutorture's kvm.sh builds), the EFI
zboot image, and the arm, csky, and mips compressed images. As with
rustc, "make -n" now runs these recipes, including those that choose
through a variable when they select another compressor. Also update the
gzip entry in Documentation/kbuild/makefiles.rst, as suggested in
review.
Tested with GNU Make 4.3 plus CentOS Stream 9's make-4.3-cloexec.patch,
GCC 16.2.0, and -j64, on ARCH=x86_64, arm64, and arm defconfig, and
ARCH=x86_64 defconfig with a built-in initramfs: none of them prints the
warning, and pigz gets the free job slots (-p 54, 64, and 50 for the
kernel image). Without this change, the x86_64 builds print it for the
kernel image and for the initramfs.
Reported-by: Paul E. McKenney <paulmck@kernel.org>
Closes: https://lore.kernel.org/all/0ddb5e5e-f801-444c-aa98-0cfe814a3026@paulmck-laptop/
Fixes: 48ebe1cbbeb51 ("kbuild: compress the kernel with pigz if available")
Assisted-by: LLM
Reviewed-by: Nicolas Schier <n.schier@fritz.com>
Acked-by: Lorenzo Stoakes (ARM) <ljs@kernel.org>
Signed-off-by: Kees Cook <kees@kernel.org>
Tested-by: Paul E. McKenney <paulmck@kernel.org>
Link: https://patch.msgid.link/20261010081914.540611-1-kees@kernel.org
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
|
|
Now every architecture has been converted to support
CONFIG_MMU_GATHER_RCU_TABLE_FREE, this configuration option no longer
makes any sense to keep around.
Therefore remove it, and remove all the dead code that existed for
!CONFIG_MMU_GATHER_RCU_TABLE_FREE architectures previously.
Additionally, CONFIG_MMU_GATHER_TABLE_FREE is no longer necessary, as all
architectures instead use CONFIG_HAVE_ARCH_TLB_REMOVE_TABLE when a custom
__tlb_remove_table() is required, so remove this too.
A number of architectures only enabled CONFIG_MMU_GATHER_RCU_TABLE_FREE if
CONFIG_MMU was set, however the mmu_gather logic only actually does
something meaningful if CONFIG_MMU is set (mmu_gather.c is only compiled
in this case, for instance).
As a result, there's no need to gate any of this logic on CONFIG_MMU
explicitly.
CONFIG_PT_RECLAIM however does have a strict dependency on CONFIG_MMU, so
make this dependency explicit.
Additionally, correct comments to remove references to non-RCU page table
gathering and make it clear that this is not 'semi-RCU', nor has it been
since commit 1fb3d8c20bfa ("mm/mmu_gather: replace IPI with
synchronize_rcu() when batch allocation fails").
With this change in place the kernel policy is now that userspace page
tables are freed after an RCU grace period, and thus it is now safe to
unconditionally perform page table walks under RCU, safe in the knowledge
that page tables will not be freed underneath the walker.
This is all that is guaranteed, however, so naturally it is still
incumbent upon page table walkers to ensure that the page table entries
are as expected.
Link: https://lore.kernel.org/20260925-rcu-pagetable-freeing-v5-11-31e91065fea4@kernel.org
Signed-off-by: Lorenzo Stoakes (ARM) <ljs@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Kiryl Shutsemau (Meta) <kas@kernel.org>
Reviewed-by: Lance Yang <lance.yang@linux.dev>
Acked-by: David Hildenbrand (Arm) <david@kernel.org>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Liam R. Howlett <liam@infradead.org>
Cc: Nico Pache <nico.pache@linux.dev>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Usama Arif <usama.arif@linux.dev>
Cc: Guo Ren <guoren@kernel.org>
Cc: Brian Cain <bcain@kernel.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Simon Schuster <schuster.simon@siemens-energy.com>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Rich Felker <dalias@libc.org>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: Paul Walmsley <pjw@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Vineet Gupta <vgupta@kernel.org>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Chris Zankel <chris@zankel.net>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Will Deacon <will@kernel.org>
Cc: Aneesh Kumar K.V <aneesh.kumar@kernel.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Richard Henderson <richard.henderson@linaro.org>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Magnus Lindholm <linmag7@gmail.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: WANG Xuerui <kernel@xen0n.name>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: James Bottomley <james.bottomley@hansenpartnership.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Christophe Leroy <chleroy@kernel.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Thomas Gleixner <tglx@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Vlastimil Babka <vbabka@kernel.org>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Qi Zheng <qi.zheng@linux.dev>
|
|
Each of these architectures directly free page tables without routing
these changes through tlb_remove_ptdesc().
The use of tlb_remove_ptdesc() is required for
CONFIG_MMU_GATHER_RCU_TABLE_FREE to correctly free page tables under RCU,
so simply update these architectures to use these functions.
Since none of the architectures share page tables or do anything unusual,
nothing complicated is required here.
Therefore this is simply a mechanical change - convert __pud_free_tlb(),
__pmd_free_tlb() and __pte_free_tlb() to use tlb_remove_ptdesc() as
required.
At the point this is in place, all mmu_gather page table freeing is
performed under RCU, and thus MMU_GATHER_RCU_TABLE_FREE is selected for
each architecture.
Note that CONFIG_MMU_GATHER_RCU_TABLE_FREE is dependent on CONFIG_MMU for
xtensa to reflect the fact that nommu does not implement page table
gathering.
This forms part of an overall effort to switch every architecture to this
mode.
Link: https://lore.kernel.org/20260925-rcu-pagetable-freeing-v5-5-31e91065fea4@kernel.org
Signed-off-by: Lorenzo Stoakes (ARM) <ljs@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Kiryl Shutsemau (Meta) <kas@kernel.org>
Acked-by: Lance Yang <lance.yang@linux.dev>
Cc: David Hildenbrand <david@kernel.org>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Liam R. Howlett <liam@infradead.org>
Cc: Nico Pache <nico.pache@linux.dev>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Usama Arif <usama.arif@linux.dev>
Cc: Guo Ren <guoren@kernel.org>
Cc: Brian Cain <bcain@kernel.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Simon Schuster <schuster.simon@siemens-energy.com>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Rich Felker <dalias@libc.org>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: Paul Walmsley <pjw@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Vineet Gupta <vgupta@kernel.org>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Chris Zankel <chris@zankel.net>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Will Deacon <will@kernel.org>
Cc: Aneesh Kumar K.V <aneesh.kumar@kernel.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Richard Henderson <richard.henderson@linaro.org>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Magnus Lindholm <linmag7@gmail.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: WANG Xuerui <kernel@xen0n.name>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: James Bottomley <james.bottomley@hansenpartnership.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Christophe Leroy <chleroy@kernel.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Thomas Gleixner <tglx@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Vlastimil Babka <vbabka@kernel.org>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Qi Zheng <qi.zheng@linux.dev>
|
|
There are no more users left for any pxd_ERROR() either in generic MM or
in the platform MM. Hence all these platform macros along with their
generic fallback could be dropped across the tree.
Link: https://lore.kernel.org/20260831054331.625505-9-anshuman.khandual@arm.com
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> # m68k
Acked-by: David Hildenbrand (Arm) <david@kernel.org>
Acked-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Cc: Helge Deller <deller@gmx.de>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: James Bottomley <james.bottomley@HansenPartnership.com>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: Lorenzo Stoakes <ljs@kernel.org>
Cc: Rich Felker <dalias@libc.org>
Cc: Samuel Holland <samuel.holland@sifive.com>
Cc: WANG Xuerui <kernel@xen0n.name>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
|
|
In calibrate_ccount(), of_clk_get() acquires a reference to the CPU
clock, but clk_put() is never called to release it. The clock
reference is used only to read the frequency via clk_get_rate(),
then the function returns immediately, leaking the reference.
Fix this by calling clk_put(clk) before returning.
Signed-off-by: 赵宇 <1466528493@qq.com>
Message-ID: <tencent_7AF43562265F45B58A25576CAFCE66967708@qq.com>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
|
|
Fix typos in comments, reported by scripts/checkpatch.pl using the
misspelling list in scripts/spelling.txt. Only touches comments, no code
changes.
Assisted-by: Cursor:claude-opus-5
Signed-off-by: Hemanth Selam <hemanth.selam@gmail.com>
Message-ID: <20260904115443.10393-1-hemanth.selam@gmail.com>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
|
|
The arch-specific kernel-doc comments were supposed to be deleted in
commit: ef558b4b7bbb
("locking/atomic: treewide: delete arch_atomic_*() kerneldoc"), [1]
but these were missed, so delete them now.
Warning: ./arch/xtensa/include/asm/atomic.h:45 expecting prototype for
atomic_read(). Prototype was for arch_atomic_read() instead
Warning: ./arch/xtensa/include/asm/atomic.h:54 expecting prototype for
atomic_set(). Prototype was for arch_atomic_set() instead
Link [1]:
https://lore.kernel.org/all/al3q54jxOKZujYue@J2N7QTR9R3.cambridge.arm.com/
Fixes: ef558b4b7bbb ("locking/atomic: treewide: delete arch_atomic_*() kerneldoc")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Message-ID: <20260831032947.3430049-1-rdunlap@infradead.org>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
|
|
Pull Xtensa updates from Max Filippov:
- use strnlen() to improve iss_console_write()
- remove unused function setup_profiling_timer()
- fix CONFIG_XTENSA_CALIBRATE_CCOUNT macro name in comment
* tag 'xtensa-20260828' of https://github.com/jcmvbkbc/linux-xtensa:
xtensa: remove unused setup_profiling_timer function
xtensa: correct CONFIG_XTENSA_CALIBRATE_CCOUNT macro name in comment
tty: xtensa/iss: use strnlen to improve iss_console_write
|
|
setup_profiling_timer() is not used by any code at this point. Since a
default weak implementation exists, there is no need to keep this
arch-specific definition around. Remove it along with the now-redundant
profile header includes.
Signed-off-by: Anthony Iliopoulos <ailiop@suse.com>
Message-ID: <20260820123711.142005-1-ailiop@suse.com>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/modules/linux
Pull module updates from Petr Pavlu:
- Remove unnecessary module::args. Nowadays, no parameter-handling code
points into the module::args buffer. The last user of module::args in
xtensa/simdisk is updated and the data is then removed
- Add Rust support for boolean parameters. This will initially be used
by the Rust null block driver
- Fix clearing the current charp parameter value when setting a new one
fails due to an allocation failure
- Improve the debugging code for kmod (request_module()) duplicates.
Fix a potential use-after-free when waiting on a duplicate request
and make several general improvements to the code
- Fix the symbol size returned when looking up a data symbol through
kallsyms
- Smaller fixes and cleanups
* tag 'modules-7.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/modules/linux:
params: fix charp corruption on allocation failure
module: validate string table section types
module/dups: Clean up includes
module/dups: Use strcmp() to compare module names
module/dups: Use scope-based cleanup helpers
module/dups: Avoid unnecessary kmod_dup_req allocations
module/dups: Fix use-after-free in kmod_dup_req lifetime handling
module/dups: Inform duplicate requests about the result directly
rust: module_param: support bool parameters
rust: module_param: return value by copy from `value`
module: Remove unnecessary module::args
xtensa/simdisk: Avoid referring to module::args
module: Remove unused DISCARD_EH_FRAME definition from module.lds.S
module: procfs: use matching type for accumulator in module_total_size()
module: use strscpy() to copy module names in stats and dup tracking
params: fix path of /sys/module/XYZ/parameters/ in comment
module/kallsyms: fix nextval for data symbol lookup
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull generic entry code updates from Thomas Gleixner:
- Make syscall user dispatching configurable
Not all architectures can makes use of syscall user dispatching.
Allow them to disable the feature completely.
- Consolidate stack randomization for the generic entry code and the
architectures using it.
Stack randomization on syscall entry was sprinkled throughout the
architecture specific low level entry code and in some cases at the
wrong points, e.g. before establishing state, which violates the
non-instrumentable constraints of that code.
Clean this up by integrating stack randomization into the generic
entry code helpers so that it is invoked at the earliest possible
point right after establishing state and converting all generic entry
code using architecture over.
- Clean up the syscall number handling in the generic entry code. It
works correctly for architectures which have a separate return value
storage in pt_regs, but fails to distinguish the case where user
space handed in -1 as syscall number from the case where the entry
code rejects it by returning -1 to the callers. Aside of that the
return value functionality of those interfaces is not really
intuitive.
Fix this by separating the decision to reject a syscall (user
dispatch, ptrace, seccomp ...) from the potential modification of the
syscall number through these mechanisms.
This solves most of the problems for architectures which do not have
a separate return value storage in pt_regs except for the case where
a tracepoint has a BPF script or a probe attached which overwrite
both the syscall number and the return value. But that's a problem
which cannot be solved in the generic code, that only can be
addressed by separating the storage model in the affected
architectures.
* tag 'core-entry-2026-08-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits)
entry, treewide: Make syscall_enter_from_user_mode[_work]() indicate syscall execution
entry: Make return type of syscall_trace_enter() bool
entry: Rework trace_syscall_enter()
entry: Rework syscall_audit_enter()
syscall_user_dispatch: Introduce ARCH_SUPPORTS_SYSCALL_USER_DISPATCH
entry: Fix seccomp bypass after ptrace with TSYNC
x86/entry: Simplify the syscall number logic
x86/entry: Get rid of the sys_ni_syscall() indirection
x86/entry: Make syscall functions static
ptrace, treewide: Rename ptrace_report_syscall_entry() to ptrace_report_syscall_permit_entry()
seccomp, treewide: Rename and convert __secure_computing() to return boolean
entry: Use syscall number instead of rereading it
entry: Remove syscall_enter_from_user_mode()
x86/syscall: Use [syscall_]enter_from_user_mode_randomize_stack()
s390/syscall: Use enter_from_user_mode_randomize_stack()
riscv/syscall: Use syscall_enter_from_user_mode_randomize_stack()
powerpc/syscall: Use syscall_enter_from_user_mode_randomize_stack()
loongarch/syscall: Use syscall_enter_from_user_mode_randomize_stack()
entry: Provide [syscall_]enter_from_user_mode_randomize_stack()
randomize_kstack: Provide add_random_kstack_offset_irqsoff()
...
|
|
When simdisk support is built as a loadable module,
simdisk_param_set_filename() receives a pointer into module::args and
stores each filename pointer as is.
In preparation for removing module::args, update the simdisk.filename
parameter code to copy the provided string. This is somewhat complicated by
the fact that simdisk support can also be built-in, in which case the
parameters are parsed during early boot before slab is available. In that
case, the command line itself is preserved for the lifetime of the kernel,
so continue storing the incoming pointer directly.
Reviewed-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
|
|
Wire up the fchroot() system call as number 472 on (nearly) all
architectures and sync the mirrored copies of the syscall tables and
the asm-generic unistd.h under tools/.
Link: https://patch.msgid.link/20260724-work-failfs-v2-5-485dabbae185@kernel.org
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
|
|
ptrace_report_syscall_permit_entry()
The return value of that function is boolean and tells the caller whether
to permit the syscall processing or not.
Rename the function so the purpose is clear and make the return type bool.
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Tested-by: Mukesh Kumar Chaurasiya (IBM) <mkchauras@gmail.com>
Reviewed-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Radu Rendec <radu@rendec.net>
Reviewed-by: Mukesh Kumar Chaurasiya (IBM) <mkchauras@gmail.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Magnus Lindholm <linmag7@gmail.com>
Link: https://patch.msgid.link/20260707190254.280015701@kernel.org
|
|
The return value of __secure_computing() currently uses 0 to indicate
that a system call should be allowed, and -1 to indicate that it should
be blocked/killed. This 0/-1 pattern is non-intuitive for a security
check function and makes the control flow at the call sites less readable.
Furthermore, any potential future changes to these return values would
require a high-risk, error-prone audit of all its users across different
architectures.
Sanitize this logic by converting the return type of __secure_computing()
to a proper boolean, where 'true' explicitly means 'allow' and 'false'
means 'fail/deny'.
Update all the two dozen or so call sites across the tree to align with
this new boolean semantic. No functional changes are intended, as the
callers still return -1 to the lower-level assembly entry code upon
seccomp denial.
Rename the function to __seccomp_permit_syscall() so that the purpose is
entirely clear.
[ tglx: Rename the function ]
Suggested-by: Thomas Gleixner <tglx@kernel.org>
Suggested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Tested-by: Mukesh Kumar Chaurasiya (IBM) <mkchauras@gmail.com>
Reviewed-by: Mukesh Kumar Chaurasiya (IBM) <mkchauras@gmail.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Link: https://patch.msgid.link/20260707190254.230735780@kernel.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
- "taskstats: fix TGID dead-thread stat retention" (Yiyang Chen)
Fix a taskstats TGID aggregation bug where fields added in the TGID
query path were not preserved after thread exit, and adds a kselftest
covering the regression.
- "lib/tests: string_helpers: Slight improvements" (Andy Shevchenko)
Improve lib/tests/string_helpers_kunit.c a little
- "lib/base64: decode fixes" (Josh Law)
Address minor issues in lib/base64.c
- "selftests/filelock: Make output more kselftestish" (Mark Brown)
Make the output from the ofdlocks test a bit easier for tooling to
work with. Also ignore the generated file
- "uaccess: unify inline vs outline copy_{from,to}_user() selection"
(Yury Norov)
Simplify the usercopy code by removing the selectability of inlining
copy_{from,to}_user().
- "ocfs2: validate inline xattr header consumers" (ZhengYuan Huang)
Fix a number of possible issues in the ocfs2 xattr code
- "lib and lib/cmdline enhancements" (Dmitry Antipov)
Provide additional robustness checking in the cmdline handling code
and its in-kernel testing and selftests
- "cleanup the RAID6 P/Q library" (Christoph Hellwig)
Clean up the RAID6 P/Q library to match the recent updates to the
RAID 5 XOR library and other CRC/crypto libraries
- "ocfs2: harden inode validators against forged metadata" (Michael
Bommarito)
Add three structural checks to OCFS2 dinode validation so malformed
on-disk fields are rejected before ocfs2_populate_inode() copies them
into the in-core inode
- "lib/raid: replace __get_free_pages() call with kmalloc()" (Mike
Rapoport)
Clean up the lib/raid code by using kmalloc() in more places
* tag 'mm-nonmm-stable-2026-06-21-10-22' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (108 commits)
ocfs2: fix circular locking dependency in ocfs2_dio_end_io_write
ocfs2: fix NULL h_transaction deref in ocfs2_assure_trans_credits
lib: interval_tree_test: validate benchmark parameters
ocfs2: avoid moving extents to occupied clusters
treewide: fix transposed "sign" typos and update spelling.txt
ocfs2: fix UBSAN array-index-out-of-bounds in ocfs2_sum_rightmost_rec
fat: reject BPB volumes whose data area starts beyond total sectors
selftests/uevent: increase __UEVENT_BUFFER_SIZE to avoid ENOBUFS on busy systems
lib/test_firmware: allocate the configured into_buf size
fs: efs: remove unneeded debug prints
checkpatch: cuppress warnings when Reported-by: is followed by Link:
MAINTAINERS: add Alexander as a kcov reviewer
mailmap: update Alexander Sverdlin's Email addresses
fs: fat: inode: replace sprintf() with scnprintf()
ocfs2: fix out-of-bounds write in ocfs2_remove_refcount_extent
ocfs2: fix race between ocfs2_control_install_private() and ocfs2_control_release()
ocfs2/dlm: require a ref for locking_state debugfs open
ocfs2: reject FITRIM ranges shorter than a cluster
ocfs2: validate fast symlink target during inode read
ocfs2: add journal NULL check in ocfs2_checkpoint_inode()
...
|
|
strncpy() has no remaining callers in the kernel[1]. Remove the
xtensa-specific inline assembly implementation and __HAVE_ARCH_STRNCPY
define, falling back to the generic version in lib/string.c.
Link: https://github.com/KSPP/linux/issues/90 [1]
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
A comment in arch/xtensa/include/asm/platform.h incorrectly refers to
CONFIG_XTENSA_CALIBRATE instead of CONFIG_XTENSA_CALIBRATE_CCOUNT.
Correct it.
Discovered while searching for CONFIG_* symbols referenced in code but
not defined in any Kconfig file.
Signed-off-by: Ethan Nelson-Moore <enelsonmoore@gmail.com>
Message-ID: <20260615224957.21574-1-enelsonmoore@gmail.com>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
|
|
gitolite.kernel.org:pub/scm/linux/kernel/git/tip/tip
Pull interrupt core updates from Thomas Gleixner:
- Rework of /proc/interrupt handling:
/proc/interrupts was subject to micro optimizations for a long time,
but most of the low hanging fruit was left on the table. This rework
addresses the major time consuming issues:
- Printing a long series of zeros one by one via a format string
instead of counting subsequent zeros and emitting a string
constant.
- Simplify and cache the conditions whether interrupts should be
printed
- Use a proper iteration over the interrupt descriptor xarray
instead of walking and testing one by one.
- Provide helper functions for the architecture code to emit the
architecture specific counters
- Convert the counter structure in x86 to an array, which
simplifies the output and add mechanisms to suppress unused
architecture interrupts, which just occupy space for nothing.
Adopt the new core mechanisms.
This adjusts the gdb scripts related to interrupt counter statistics
to work with the new mechanisms.
- Prevent a string overflow in the /proc/irq/$N/ directory name
creation code.
* tag 'irq-core-2026-06-13' of gitolite.kernel.org:pub/scm/linux/kernel/git/tip/tip:
x86/irq: Add missing 's' back to thermal event printout
genirq/proc: Speed up /proc/interrupts iteration
genirq/proc: Runtime size the chip name
genirq: Expose irq_find_desc_at_or_after() in core code
genirq: Add rcuref count to struct irq_desc
genirq/proc: Increase default interrupt number precision to four
genirq: Calculate precision only when required
genirq: Cache the condition for /proc/interrupts exposure
genirq/manage: Make NMI cleanup RT safe
genirq: Expose nr_irqs in core code
scripts/gdb: Update x86 interrupts to the array based storage
x86/irq: Move IOAPIC misrouted and PIC/APIC error counts into irq_stats
x86/irq: Suppress unlikely interrupt stats by default
x86/irq: Make irqstats array based
genirq/proc: Utilize irq_desc::tot_count to avoid evaluation
genirq/proc: Avoid formatting zero counts in /proc/interrupts
x86/irq: Optimize interrupts decimals printing
genirq/proc: Size interrupt directory names for 10-digit interrupt numbers
|
|
The kernel allows arches to select between inline and outline
implementations of the copy_{from,to}_user() by defining individual
INLINE_COPY_FROM_USER and INLINE_COPY_TO_USER, correspondingly. However,
all arches enable or disable them always together.
Without the real use-case for one helper being inlined while the other
outlined, having independent controls is excessive and error prone.
Switch the codebase to the single unified INLINE_COPY_USER control.
Link: https://lore.kernel.org/20260425020857.356850-3-ynorov@nvidia.com
Signed-off-by: Yury Norov <ynorov@nvidia.com>
Tested-by: Alice Ryhl <aliceryhl@google.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christophe Leroy (CS GROUP) <chleroy@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Viktor Malik <vmalik@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Quite some architectures have four character wide acronyms for architecture
specific interrupts like IPI, NMI, etc.
The default precision of printing the Linux device interrupt numbers is
three, which causes quite some code to play games with adding or omitting
space after the acronym and the colon in order to keep the per CPU numbers
properly aligned.
Increase the default number precision to four in the core code and get rid
of the space games all over the place. At the same time align all
architecture specific descriptor texts left so that they show up in the
same column as the interrupt chip names, which makes the output more
uniform accross architectures. Fix up the GDB script to this new scheme as
well.
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260517194931.839482411@kernel.org
|
|
On real hardware, panic and machine reboot may not flush hardware cache
to memory. This means the persistent ring buffer, which relies on a
coherent state of memory, may not have its events written to the buffer
and they may be lost. Moreover, there may be inconsistency with the
counters which are used for validation of the integrity of the
persistent ring buffer which may cause all data to be discarded.
To avoid this issue, stop recording of the ring buffer on panic and
flush the cache of the ring buffer's memory.
Fixes: e645535a954a ("tracing: Add option to use memmapped memory for trace boot instance")
Cc: stable@vger.kernel.org
Cc: Will Deacon <will@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Ian Rogers <irogers@google.com>
Link: https://patch.msgid.link/177751969602.2136606.12031934362587643488.stgit@mhiramat.tok.corp.google.com
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
Use strnlen() to limit scanning 's' to 'count' bytes. Use the length of
's' to decide if simc_write() should be called instead of dereferencing
it first and then calling strlen().
With strnlen(), iss_console_write() is further hardened against callers
where 's' is not NUL-terminated.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Message-ID: <20260430090253.237654-3-thorsten.blum@linux.dev>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
|
|
Pull Xtensa updates from Max Filippov:
- use register_sys_off_handler(SYS_OFF_MODE_RESTART) instead of
the deprecated register_restart_handler()
- drop custom ucontext.h and reuse asm-generic ucontext.h
* tag 'xtensa-20260422' of https://github.com/jcmvbkbc/linux-xtensa:
xtensa: uapi: Reuse asm-generic ucontext.h
xtensa: xtfpga: Use register_sys_off_handler(SYS_OFF_MODE_RESTART)
xtensa: xt2000: Use register_sys_off_handler(SYS_OFF_MODE_RESTART)
xtensa: ISS: Use register_sys_off_handler(SYS_OFF_MODE_RESTART)
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Allow TLP Processing Hints to be enabled for RCiEPs (George Abraham
P)
- Enable AtomicOps only if we know the Root Port supports them (Gerd
Bayer)
- Don't enable AtomicOps for RCiEPs since none of them need Atomic
Ops and we can't tell whether the Root Complex would support them
(Gerd Bayer)
- Leave Precision Time Measurement disabled until a driver enables it
to avoid PCIe errors (Mika Westerberg)
- Make pci_set_vga_state() fail if bridge doesn't support VGA
routing, i.e., PCI_BRIDGE_CTL_VGA is not writable, and return
errors to vga_get() callers including userspace via
/dev/vga_arbiter (Simon Richter)
- Validate max-link-speed from DT in j721e, brcmstb, mediatek-gen3,
rzg3s drivers (where the actual controller constraints are known),
and remove validation from the generic OF DT accessor (Hans Zhang)
- Remove pc110pad driver (no longer useful after 486 CPU support
removed) and no_pci_devices() (pc110pad was the last user) (Dmitry
Torokhov, Heiner Kallweit)
Resource management:
- Prevent assigning space to unimplemented bridge windows; previously
we mistakenly assumed prefetchable window existed and assigned
space and put a BAR there (Ahmed Naseef)
- Avoid shrinking bridge windows to fit in the initial Root Port
window; fixes one problem with devices with large BARs connected
via switches, e.g., Thunderbolt (Ilpo Järvinen)
- Pass full extent of empty space, not just the aligned space, to
resource_alignf callback so free space before the requested
alignment can be used (Ilpo Järvinen)
- Place small resources before larger ones for better utilization of
address space (Ilpo Järvinen)
- Fix alignment calculation for resource size larger than align,
e.g., bridge windows larger than the 1MB required alignment (Ilpo
Järvinen)
Reset:
- Update slot handling so all ARI functions are treated as being in
the same slot. They're all reset by Secondary Bus Reset, but
previously drivers of ARI functions that appeared to be on a
non-zero device weren't notified and fatal hardware errors could
result (Keith Busch)
- Make sysfs reset_subordinate hotplug safe to avoid spurious hotplug
events (Keith Busch)
- Hide Secondary Bus Reset ('bus') from sysfs reset_methods if masked
by CXL because it has no effect (Vidya Sagar)
- Avoid FLR for AMD NPU device, where it causes the device to hang
(Lizhi Hou)
Error handling:
- Clear only error bits in PCIe Device Status to avoid accidentally
clearing Emergency Power Reduction Detected (Shuai Xue)
- Check for AER errors even in devices without drivers (Lukas Wunner)
- Initialize ratelimit info so DPC and EDR paths log AER error
information (Kuppuswamy Sathyanarayanan)
Power control:
- Add UPD720201/UPD720202 USB 3.0 xHCI Host Controller .compatible so
generic pwrctrl driver can control it (Neil Armstrong)
Hotplug:
- Set LED_HW_PLUGGABLE for NPEM hotplug-capable ports so LED core
doesn't complain when setting brightness fails because the endpoint
is gone (Richard Cheng)
Peer-to-peer DMA:
- Allow wildcards in list of host bridges that support peer-to-peer
DMA between hierarchy domains and add all Google SoCs (Jacob
Moroni)
Endpoint framework:
- Advertise dynamic inbound mapping support in pci-epf-test and
update host pci_endpoint_test to skip doorbell testing if not
advertised by endpoint (Koichiro Den)
- Return 0, not remaining timeout, when MHI eDMA ops complete so
mhi_ep_ring_add_element() doesn't interpret non-zero as failure
(Daniel Hodges)
- Remove vntb and ntb duplicate resource teardown that leads to oops
when .allow_link() fails or .drop_link() is called (Koichiro Den)
- Disable vntb delayed work before clearing BAR mappings and
doorbells to avoid oops caused by doing the work after resources
have been torn down (Koichiro Den)
- Add a way to describe reserved subregions within BARs, e.g.,
platform-owned fixed register windows, and use it for the RK3588
BAR4 DMA ctrl window (Koichiro Den)
- Add BAR_DISABLED for BARs that will never be available to an EPF
driver, and change some BAR_RESERVED annotations to BAR_DISABLED
(Niklas Cassel)
- Add NTB .get_dma_dev() callback for cases where DMA API requires a
different device, e.g., vNTB devices (Koichiro Den)
- Add reserved region types for MSI-X Table and PBA so Endpoint
controllers can them as describe hardware-owned regions in a
BAR_RESERVED BAR (Manikanta Maddireddy)
- Make Tegra194/234 BAR0 programmable and remove 1MB size limit
(Manikanta Maddireddy)
- Expose Tegra BAR2 (MSI-X) and BAR4 (DMA) as 64-bit BAR_RESERVED
(Manikanta Maddireddy)
- Add Tegra194 and Tegra234 device table entries to pci_endpoint_test
(Manikanta Maddireddy)
- Skip the BAR subrange selftest if there are not enough inbound
window resources to run the test (Christian Bruel)
New native PCIe controller drivers:
- Add DT binding and driver for Andes QiLai SoC PCIe host controller
(Randolph Lin)
- Add DT binding and driver for ESWIN PCIe Root Complex (Senchuan
Zhang)
Baikal T-1 PCIe controller driver:
- Remove driver since it never quite became usable (Andy Shevchenko)
Cadence PCIe controller driver:
- Implement byte/word config reads with dword (32-bit) reads because
some Cadence controllers don't support sub-dword accesses (Aksh
Garg)
CIX Sky1 PCIe controller driver:
- Add 'power-domains' to DT binding for SCMI power domain (Gary Yang)
Freescale i.MX6 PCIe controller driver:
- Add i.MX94 and i.MX943 to fsl,imx6q-pcie-ep DT binding (Richard
Zhu)
- Delay instead of polling for L2/L3 Ready after PME_Turn_off when
suspending i.MX6SX because LTSSM registers are inaccessible
(Richard Zhu)
- Separate PERST# assertion (for resetting endpoints) from core reset
(for resetting the RC itself) to prepare for new DTs with PERST#
GPIO in per-Root Port nodes (Sherry Sun)
- Retain Root Port MSI capability on i.MX7D, i.MX8MM, and i.MX8MQ so
MSI from downstream devices will work (Richard Zhu)
- Fix i.MX95 reference clock source selection when internal refclk is
used (Franz Schnyder)
Freescale Layerscape PCIe controller driver:
- Allow building as a removable module (Sascha Hauer)
MediaTek PCIe Gen3 controller driver:
- Use dev_err_probe() to simplify error paths and make deferred probe
messages visible in /sys/kernel/debug/devices_deferred (Chen-Yu
Tsai)
- Power off device if setup fails (Chen-Yu Tsai)
- Integrate new pwrctrl API to enable power control for WiFi/BT
adapters on mainboard or in PCIe or M.2 slots (Chen-Yu Tsai)
NVIDIA Tegra194 PCIe controller driver:
- Poll less aggressively and non-atomically for PME_TO_Ack during
transition to L2 (Vidya Sagar)
- Disable LTSSM after transition to Detect on surprise link down to
stop toggling between Polling and Detect (Manikanta Maddireddy)
- Don't force the device into the D0 state before L2 when suspending
or shutting down the controller (Vidya Sagar)
- Disable PERST# IRQ only in Endpoint mode because it's not
registered in Root Port mode (Manikanta Maddireddy)
- Handle 'nvidia,refclk-select' as optional (Vidya Sagar)
- Disable direct speed change in Endpoint mode so link speed change
is controlled by the host (Vidya Sagar)
- Set LTR values before link up to avoid bogus LTR messages with 0
latency (Vidya Sagar)
- Allow system suspend when the Endpoint link is down (Vidya Sagar)
- Use DWC IP core version, not Tegra custom values, to avoid DWC core
version check warnings (Manikanta Maddireddy)
- Apply ECRC workaround to devices based on DesignWare 5.00a as well
as 4.90a (Manikanta Maddireddy)
- Disable PM Substate L1.2 in Endpoint mode to work around Tegra234
erratum (Vidya Sagar)
- Delay post-PERST# cleanup until core is powered on to avoid CBB
timeout (Manikanta Maddireddy)
- Assert CLKREQ# so switches that forward it to their downstream side
can bring up those links successfully (Vidya Sagar)
- Calibrate pipe to UPHY for Endpoint mode to reset stale PLL state
from any previous bad link state (Vidya Sagar)
- Remove IRQF_ONESHOT flag from Endpoint interrupt registration so
DMA driver and Endpoint controller driver can share the interrupt
line (Vidya Sagar)
- Enable DMA interrupt to support DMA in both Root Port and Endpoint
modes (Vidya Sagar)
- Enable hardware link retraining after link goes down in Endpoint
mode (Vidya Sagar)
- Add DT binding and driver support for core clock monitoring (Vidya
Sagar)
Qualcomm PCIe controller driver:
- Advertise 'Hot-Plug Capable' and set 'No Command Completed Support'
since Qcom Root Ports support hotplug events like DL_Up/Down and
can accept writes to Slot Control without delays between writes
(Krishna Chaitanya Chundru)
Renesas R-Car PCIe controller driver:
- Mark Endpoint BAR0 and BAR2 as Resizable (Koichiro Den)
- Reduce EPC BAR alignment requirement to 4K (Koichiro Den)
Renesas RZ/G3S PCIe controller driver:
- Add RZ/G3E to DT binding and to driver (John Madieu)
- Assert (not deassert) resets in probe error path (John Madieu)
- Assert resets in suspend path in reverse order they were deasserted
during probe (John Madieu)
- Rework inbound window algorithm to prevent mapping more than
intended region and enforce alignment on size, to prepare for
RZ/G3E support (John Madieu)
Rockchip DesignWare PCIe controller driver:
- Add tracepoints for PCIe controller LTSSM transitions and link rate
changes (Shawn Lin)
- Trace LTSSM events collected by the dw-rockchip debug FIFO (Shawn
Lin)
SOPHGO PCIe controller driver:
- Disable ASPM L0s and L1 on Sophgo 2042 PCIe Root Ports that
advertise support for them (Yao Zi)
Synopsys DesignWare PCIe controller driver:
- Continue with system suspend even if an Endpoint doesn't respond
with PME_TO_Ack message (Manivannan Sadhasivam)
- Set Endpoint MSI-X Table Size in the correct function of a
multi-function device when configuring MSI-X, not in Function 0
(Aksh Garg)
- Set Max Link Width and Max Link Speed for all functions of a
multi-function device, not just Function 0 (Aksh Garg)
- Expose PCIe event counters in groups 5-7 in debugfs (Hans Zhang)
Miscellaneous:
- Warn only once about invalid ACS kernel parameter format (Richard
Cheng)
- Suppress FW_BUG warning when writing sysfs 'numa_node' with the
current value (Li RongQing)
- Drop redundant 'depends on PCI' from Kconfig (Julian Braha)"
* tag 'pci-v7.1-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (165 commits)
PCI/P2PDMA: Add Google SoCs to the P2P DMA host bridge list
PCI/P2PDMA: Allow wildcard Device IDs in host bridge list
PCI: sg2042: Avoid L0s and L1 on Sophgo 2042 PCIe Root Ports
PCI: cadence: Add flags for disabling ASPM capability for broken Root Ports
PCI: tegra194: Add core monitor clock support
dt-bindings: PCI: tegra194: Add monitor clock support
PCI: tegra194: Enable hardware hot reset mode in Endpoint mode
PCI: tegra194: Enable DMA interrupt
PCI: tegra194: Remove IRQF_ONESHOT flag during Endpoint interrupt registration
PCI: tegra194: Calibrate pipe to UPHY for Endpoint mode
PCI: tegra194: Assert CLKREQ# explicitly by default
PCI: tegra194: Fix CBB timeout caused by DBI access before core power-on
PCI: tegra194: Disable L1.2 capability of Tegra234 EP
PCI: dwc: Apply ECRC workaround to DesignWare 5.00a as well
PCI: tegra194: Use DWC IP core version
PCI: tegra194: Free up Endpoint resources during remove()
PCI: tegra194: Allow system suspend when the Endpoint link is not up
PCI: tegra194: Set LTR message request before PCIe link up in Endpoint mode
PCI: tegra194: Disable direct speed change for Endpoint mode
PCI: tegra194: Use devm_gpiod_get_optional() to parse "nvidia,refclk-select"
...
|
|
Patch series "change young flag check functions to return bool", v2.
This is a cleanup patchset to change all young flag check functions to
return bool, as discussed with David in the previous thread[1]. Since
callers only care about whether the young flag was set, returning bool
makes the intention clearer. No functional changes intended.
This patch (of 6):
Callers use ptep_test_and_clear_young() to clear the young flag and check
whether it was set. Change the return type to bool to make the intention
clearer.
Link: https://lkml.kernel.org/r/cover.1774075004.git.baolin.wang@linux.alibaba.com
Link: https://lkml.kernel.org/r/57e70efa9703d43959aa645246ea3cbdba14fa17.1774075004.git.baolin.wang@linux.alibaba.com
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Reviewed-by: Lorenzo Stoakes (Oracle) <ljs@kernel.org>
Acked-by: David Hildenbrand (Arm) <david@kernel.org>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Reduce 22 declarations of empty_zero_page to 3 and 23 declarations of
ZERO_PAGE() to 4.
Every architecture defines empty_zero_page that way or another, but for the
most of them it is always a page aligned page in BSS and most definitions
of ZERO_PAGE do virt_to_page(empty_zero_page).
Move Linus vetted x86 definition of empty_zero_page and ZERO_PAGE() to the
core MM and drop these definitions in architectures that do not implement
colored zero page (MIPS and s390).
ZERO_PAGE() remains a macro because turning it to a wrapper for a static
inline causes severe pain in header dependencies.
For the most part the change is mechanical, with these being noteworthy:
* alpha: aliased empty_zero_page with ZERO_PGE that was also used for boot
parameters. Switching to a generic empty_zero_page removes the aliasing
and keeps ZERO_PGE for boot parameters only
* arm64: uses __pa_symbol() in ZERO_PAGE() so that definition of
ZERO_PAGE() is kept intact.
* m68k/parisc/um: allocated empty_zero_page from memblock,
although they do not support zero page coloring and having it in BSS
will work fine.
* sparc64 can have empty_zero_page in BSS rather allocate it, but it
can't use virt_to_page() for BSS. Keep it's definition of ZERO_PAGE()
but instead of allocating it, make mem_map_zero point to
empty_zero_page.
* sh: used empty_zero_page for boot parameters at the very early boot.
Rename the parameters page to boot_params_page and let sh use the generic
empty_zero_page.
* hexagon: had an amusing comment about empty_zero_page
/* A handy thing to have if one has the RAM. Declared in head.S */
that unfortunately had to go :)
Link: https://lkml.kernel.org/r/20260211103141.3215197-4-rppt@kernel.org
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Acked-by: Helge Deller <deller@gmx.de> [parisc]
Tested-by: Helge Deller <deller@gmx.de> [parisc]
Reviewed-by: Christophe Leroy (CS GROUP) <chleroy@kernel.org>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Magnus Lindholm <linmag7@gmail.com> [alpha]
Acked-by: Dinh Nguyen <dinguyen@kernel.org> [nios2]
Acked-by: Andreas Larsson <andreas@gaisler.com> [sparc]
Acked-by: David Hildenbrand (Arm) <david@kernel.org>
Acked-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: "Borislav Petkov (AMD)" <bp@alien8.de>
Cc: David S. Miller <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vineet Gupta <vgupta@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When a bridge window contains big and small resource(s), the small
resource(s) may not amount to the half of the size of the big resource
which would allow calculate_head_align() to shrink the head alignment.
This results in always placing the small resource(s) after the big
resource.
In general, it would be good to be able to place the small resource(s)
before the big resource to achieve better utilization of the address space.
In the cases where the large resource can only fit at the end of the
window, it is even required.
However, carrying the information over from pbus_size_mem() and
calculate_head_align() to __pci_assign_resource() and
pcibios_align_resource() is not easy with the current data structures.
A somewhat hacky way to move the non-aligning tail part to the head is
possible within pcibios_align_resource(). The free space between the start
of the free space span and the aligned start address can be compared with
the non-aligning remainder of the size. If the free space is larger than
the remainder, placing the remainder before the start address is possible.
This relocation should generally work, because PCI resources consist only
power-of-2 atoms.
Various arch requirements may still need to override the relocation, so the
relocation is only applied selectively in such cases.
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=221205
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Xifer <xiferdev@gmail.com>
Link: https://patch.msgid.link/20260324165633.4583-10-ilpo.jarvinen@linux.intel.com
|
|
__find_resource_space() calculates the full extent of empty space but only
passes the aligned space to resource_alignf callback. In some situations,
the callback may choose take advantage of the free space before the
requested alignment.
Pass the full extent of the calculated empty space to resource_alignf
callback as an additional parameter.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Xifer <xiferdev@gmail.com>
Link: https://patch.msgid.link/20260324165633.4583-3-ilpo.jarvinen@linux.intel.com
|
|
Drop the custom non-uapi definition which is the same as the generic
uapi one.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Message-ID: <20260314-uapi-ucontext-xtensa-v1-1-08dceca7e6a2@weissschuh.net>
[Max: Move new generic-y line to the arch/xtensa/include/uapi/asm/Kbuild]
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
|
|
Function register_restart_handler() is deprecated. Using this new API
removes our need to keep and manage a struct notifier_block.
Signed-off-by: Andrew Davis <afd@ti.com>
Message-ID: <20260302193543.275197-3-afd@ti.com>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
|
|
Function register_restart_handler() is deprecated. Using this new API
removes our need to keep and manage a struct notifier_block.
Signed-off-by: Andrew Davis <afd@ti.com>
Message-ID: <20260302193543.275197-2-afd@ti.com>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
|
|
Function register_restart_handler() is deprecated. Using this new API
removes our need to keep and manage a struct notifier_block.
Signed-off-by: Andrew Davis <afd@ti.com>
Message-ID: <20260302193543.275197-1-afd@ti.com>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
|
|
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
Pull Xtensa update from Max Filippov:
- fix unhandled case in the load/store fault handler
in configurations with MMU
* tag 'xtensa-20260219' of https://github.com/jcmvbkbc/linux-xtensa:
xtensa: align: validate access in fast_load_store
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
- "ocfs2: give ocfs2 the ability to reclaim suballocator free bg" saves
disk space by teaching ocfs2 to reclaim suballocator block group
space (Heming Zhao)
- "Add ARRAY_END(), and use it to fix off-by-one bugs" adds the
ARRAY_END() macro and uses it in various places (Alejandro Colomar)
- "vmcoreinfo: support VMCOREINFO_BYTES larger than PAGE_SIZE" makes
the vmcore code future-safe, if VMCOREINFO_BYTES ever exceeds the
page size (Pnina Feder)
- "kallsyms: Prevent invalid access when showing module buildid" cleans
up kallsyms code related to module buildid and fixes an invalid
access crash when printing backtraces (Petr Mladek)
- "Address page fault in ima_restore_measurement_list()" fixes a
kexec-related crash that can occur when booting the second-stage
kernel on x86 (Harshit Mogalapalli)
- "kho: ABI headers and Documentation updates" updates the kexec
handover ABI documentation (Mike Rapoport)
- "Align atomic storage" adds the __aligned attribute to atomic_t and
atomic64_t definitions to get natural alignment of both types on
csky, m68k, microblaze, nios2, openrisc and sh (Finn Thain)
- "kho: clean up page initialization logic" simplifies the page
initialization logic in kho_restore_page() (Pratyush Yadav)
- "Unload linux/kernel.h" moves several things out of kernel.h and into
more appropriate places (Yury Norov)
- "don't abuse task_struct.group_leader" removes the usage of
->group_leader when it is "obviously unnecessary" (Oleg Nesterov)
- "list private v2 & luo flb" adds some infrastructure improvements to
the live update orchestrator (Pasha Tatashin)
* tag 'mm-nonmm-stable-2026-02-12-10-48' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (107 commits)
watchdog/hardlockup: simplify perf event probe and remove per-cpu dependency
procfs: fix missing RCU protection when reading real_parent in do_task_stat()
watchdog/softlockup: fix sample ring index wrap in need_counting_irqs()
kcsan, compiler_types: avoid duplicate type issues in BPF Type Format
kho: fix doc for kho_restore_pages()
tests/liveupdate: add in-kernel liveupdate test
liveupdate: luo_flb: introduce File-Lifecycle-Bound global state
liveupdate: luo_file: Use private list
list: add kunit test for private list primitives
list: add primitives for private list manipulations
delayacct: fix uapi timespec64 definition
panic: add panic_force_cpu= parameter to redirect panic to a specific CPU
netclassid: use thread_group_leader(p) in update_classid_task()
RDMA/umem: don't abuse current->group_leader
drm/pan*: don't abuse current->group_leader
drm/amd: kill the outdated "Only the pthreads threading model is supported" checks
drm/amdgpu: don't abuse current->group_leader
android/binder: use same_thread_group(proc->tsk, current) in binder_mmap()
android/binder: don't abuse current->group_leader
kho: skip memoryless NUMA nodes when reserving scratch areas
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- "powerpc/64s: do not re-activate batched TLB flush" makes
arch_{enter|leave}_lazy_mmu_mode() nest properly (Alexander Gordeev)
It adds a generic enter/leave layer and switches architectures to use
it. Various hacks were removed in the process.
- "zram: introduce compressed data writeback" implements data
compression for zram writeback (Richard Chang and Sergey Senozhatsky)
- "mm: folio_zero_user: clear page ranges" adds clearing of contiguous
page ranges for hugepages. Large improvements during demand faulting
are demonstrated (David Hildenbrand)
- "memcg cleanups" tidies up some memcg code (Chen Ridong)
- "mm/damon: introduce {,max_}nr_snapshots and tracepoint for damos
stats" improves DAMOS stat's provided information, deterministic
control, and readability (SeongJae Park)
- "selftests/mm: hugetlb cgroup charging: robustness fixes" fixes a few
issues in the hugetlb cgroup charging selftests (Li Wang)
- "Fix va_high_addr_switch.sh test failure - again" addresses several
issues in the va_high_addr_switch test (Chunyu Hu)
- "mm/damon/tests/core-kunit: extend existing test scenarios" improves
the KUnit test coverage for DAMON (Shu Anzai)
- "mm/khugepaged: fix dirty page handling for MADV_COLLAPSE" fixes a
glitch in khugepaged which was causing madvise(MADV_COLLAPSE) to
transiently return -EAGAIN (Shivank Garg)
- "arch, mm: consolidate hugetlb early reservation" reworks and
consolidates a pile of straggly code related to reservation of
hugetlb memory from bootmem and creation of CMA areas for hugetlb
(Mike Rapoport)
- "mm: clean up anon_vma implementation" cleans up the anon_vma
implementation in various ways (Lorenzo Stoakes)
- "tweaks for __alloc_pages_slowpath()" does a little streamlining of
the page allocator's slowpath code (Vlastimil Babka)
- "memcg: separate private and public ID namespaces" cleans up the
memcg ID code and prevents the internal-only private IDs from being
exposed to userspace (Shakeel Butt)
- "mm: hugetlb: allocate frozen gigantic folio" cleans up the
allocation of frozen folios and avoids some atomic refcount
operations (Kefeng Wang)
- "mm/damon: advance DAMOS-based LRU sorting" improves DAMOS's movement
of memory betewwn the active and inactive LRUs and adds auto-tuning
of the ratio-based quotas and of monitoring intervals (SeongJae Park)
- "Support page table check on PowerPC" makes
CONFIG_PAGE_TABLE_CHECK_ENFORCED work on powerpc (Andrew Donnellan)
- "nodemask: align nodes_and{,not} with underlying bitmap ops" makes
nodes_and() and nodes_andnot() propagate the return values from the
underlying bit operations, enabling some cleanup in calling code
(Yury Norov)
- "mm/damon: hide kdamond and kdamond_lock from API callers" cleans up
some DAMON internal interfaces (SeongJae Park)
- "mm/khugepaged: cleanups and scan limit fix" does some cleanup work
in khupaged and fixes a scan limit accounting issue (Shivank Garg)
- "mm: balloon infrastructure cleanups" goes to town on the balloon
infrastructure and its page migration function. Mainly cleanups, also
some locking simplification (David Hildenbrand)
- "mm/vmscan: add tracepoint and reason for kswapd_failures reset" adds
additional tracepoints to the page reclaim code (Jiayuan Chen)
- "Replace wq users and add WQ_PERCPU to alloc_workqueue() users" is
part of Marco's kernel-wide migration from the legacy workqueue APIs
over to the preferred unbound workqueues (Marco Crivellari)
- "Various mm kselftests improvements/fixes" provides various unrelated
improvements/fixes for the mm kselftests (Kevin Brodsky)
- "mm: accelerate gigantic folio allocation" greatly speeds up gigantic
folio allocation, mainly by avoiding unnecessary work in
pfn_range_valid_contig() (Kefeng Wang)
- "selftests/damon: improve leak detection and wss estimation
reliability" improves the reliability of two of the DAMON selftests
(SeongJae Park)
- "mm/damon: cleanup kdamond, damon_call(), damos filter and
DAMON_MIN_REGION" does some cleanup work in the core DAMON code
(SeongJae Park)
- "Docs/mm/damon: update intro, modules, maintainer profile, and misc"
performs maintenance work on the DAMON documentation (SeongJae Park)
- "mm: add and use vma_assert_stabilised() helper" refactors and cleans
up the core VMA code. The main aim here is to be able to use the mmap
write lock's lockdep state to perform various assertions regarding
the locking which the VMA code requires (Lorenzo Stoakes)
- "mm, swap: swap table phase II: unify swapin use" removes some old
swap code (swap cache bypassing and swap synchronization) which
wasn't working very well. Various other cleanups and simplifications
were made. The end result is a 20% speedup in one benchmark (Kairui
Song)
- "enable PT_RECLAIM on more 64-bit architectures" makes PT_RECLAIM
available on 64-bit alpha, loongarch, mips, parisc, and um. Various
cleanups were performed along the way (Qi Zheng)
* tag 'mm-stable-2026-02-11-19-22' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (325 commits)
mm/memory: handle non-split locks correctly in zap_empty_pte_table()
mm: move pte table reclaim code to memory.c
mm: make PT_RECLAIM depends on MMU_GATHER_RCU_TABLE_FREE
mm: convert __HAVE_ARCH_TLB_REMOVE_TABLE to CONFIG_HAVE_ARCH_TLB_REMOVE_TABLE config
um: mm: enable MMU_GATHER_RCU_TABLE_FREE
parisc: mm: enable MMU_GATHER_RCU_TABLE_FREE
mips: mm: enable MMU_GATHER_RCU_TABLE_FREE
LoongArch: mm: enable MMU_GATHER_RCU_TABLE_FREE
alpha: mm: enable MMU_GATHER_RCU_TABLE_FREE
mm: change mm/pt_reclaim.c to use asm/tlb.h instead of asm-generic/tlb.h
mm/damon/stat: remove __read_mostly from memory_idle_ms_percentiles
zsmalloc: make common caches global
mm: add SPDX id lines to some mm source files
mm/zswap: use %pe to print error pointers
mm/vmscan: use %pe to print error pointers
mm/readahead: fix typo in comment
mm: khugepaged: fix NR_FILE_PAGES and NR_SHMEM in collapse_file()
mm: refactor vma_map_pages to use vm_insert_pages
mm/damon: unify address range representation with damon_addr_range
mm/cma: replace snprintf with strscpy in cma_new_area
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
"Scheduler Kconfig space updates:
- Further consolidate configurable preemption modes (Peter Zijlstra)
Reduce the number of architectures that are allowed to offer
PREEMPT_NONE and PREEMPT_VOLUNTARY, reducing the number of
preemption models from four to just two: 'full' and 'lazy' on
up-to-date architectures (arm64, loongarch, powerpc, riscv, s390,
x86).
None and voluntary are only available as legacy features on
platforms that don't implement lazy preemption yet, or which don't
even support preemption.
The goal is to eventually remove cond_resched() and voluntary
preemption altogether.
RSEQ based 'scheduler time slice extension' support (Thomas Gleixner
and Peter Zijlstra):
This allows a thread to request a time slice extension when it enters
a critical section to avoid contention on a resource when the thread
is scheduled out inside of the critical section.
- Add fields and constants for time slice extension
- Provide static branch for time slice extensions
- Add statistics for time slice extensions
- Add prctl() to enable time slice extensions
- Implement sys_rseq_slice_yield()
- Implement syscall entry work for time slice extensions
- Implement time slice extension enforcement timer
- Reset slice extension when scheduled
- Implement rseq_grant_slice_extension()
- entry: Hook up rseq time slice extension
- selftests: Implement time slice extension test
- Allow registering RSEQ with slice extension
- Move slice_ext_nsec to debugfs
- Lower default slice extension
- selftests/rseq: Add rseq slice histogram script
Scheduler performance/scalability improvements:
- Update rq->avg_idle when a task is moved to an idle CPU, which
improves the scalability of various workloads (Shubhang Kaushik)
- Reorder fields in 'struct rq' for better caching (Blake Jones)
- Fair scheduler SMP NOHZ balancing code speedups (Shrikanth Hegde):
- Move checking for nohz cpus after time check
- Change likelyhood of nohz.nr_cpus
- Remove nohz.nr_cpus and use weight of cpumask instead
- Avoid false sharing for sched_clock_irqtime (Wangyang Guo)
- Cleanups (Yury Norov):
- Drop useless cpumask_empty() in find_energy_efficient_cpu()
- Simplify task_numa_find_cpu()
- Use cpumask_weight_and() in sched_balance_find_dst_group()
DL scheduler updates:
- Add a deadline server for sched_ext tasks (by Andrea Righi and Joel
Fernandes, with fixes by Peter Zijlstra)
RT scheduler updates:
- Skip currently executing CPU in rto_next_cpu() (Chen Jinghuang)
Entry code updates and performance improvements (Jinjie Ruan)
This is part of the scheduler tree in this cycle due to inter-
dependencies with the RSEQ based time slice extension work:
- Remove unused syscall argument from syscall_trace_enter()
- Rework syscall_exit_to_user_mode_work() for architecture reuse
- Add arch_ptrace_report_syscall_entry/exit()
- Inline syscall_exit_work() and syscall_trace_enter()
Scheduler core updates (Peter Zijlstra):
- Rework sched_class::wakeup_preempt() and rq_modified_*()
- Avoid rq->lock bouncing in sched_balance_newidle()
- Rename rcu_dereference_check_sched_domain() =>
rcu_dereference_sched_domain()
- <linux/compiler_types.h>: Add the __signed_scalar_typeof() helper
Fair scheduler updates/refactoring (Peter Zijlstra and Ingo Molnar):
- Fold the sched_avg update
- Change rcu_dereference_check_sched_domain() to rcu-sched
- Switch to rcu_dereference_all()
- Remove superfluous rcu_read_lock()
- Limit hrtick work
- Join two #ifdef CONFIG_FAIR_GROUP_SCHED blocks
- Clean up comments in 'struct cfs_rq'
- Separate se->vlag from se->vprot
- Rename cfs_rq::avg_load to cfs_rq::sum_weight
- Rename cfs_rq::avg_vruntime to ::sum_w_vruntime & helper functions
- Introduce and use the vruntime_cmp() and vruntime_op() wrappers for
wrapped-signed aritmetics
- Sort out 'blocked_load*' namespace noise
Scheduler debugging code updates:
- Export hidden tracepoints to modules (Gabriele Monaco)
- Convert copy_from_user() + kstrtouint() to kstrtouint_from_user()
(Fushuai Wang)
- Add assertions to QUEUE_CLASS (Peter Zijlstra)
- hrtimer: Fix tracing oddity (Thomas Gleixner)
Misc fixes and cleanups:
- Re-evaluate scheduling when migrating queued tasks out of throttled
cgroups (Zicheng Qu)
- Remove task_struct->faults_disabled_mapping (Christoph Hellwig)
- Fix math notation errors in avg_vruntime comment (Zhan Xusheng)
- sched/cpufreq: Use %pe format for PTR_ERR() printing
(zenghongling)"
* tag 'sched-core-2026-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (64 commits)
sched: Re-evaluate scheduling when migrating queued tasks out of throttled cgroups
sched/cpufreq: Use %pe format for PTR_ERR() printing
sched/rt: Skip currently executing CPU in rto_next_cpu()
sched/clock: Avoid false sharing for sched_clock_irqtime
selftests/sched_ext: Add test for DL server total_bw consistency
selftests/sched_ext: Add test for sched_ext dl_server
sched/debug: Fix dl_server (re)start conditions
sched/debug: Add support to change sched_ext server params
sched_ext: Add a DL server for sched_ext tasks
sched/debug: Stop and start server based on if it was active
sched/debug: Fix updating of ppos on server write ops
sched/deadline: Clear the defer params
entry: Inline syscall_exit_work() and syscall_trace_enter()
entry: Add arch_ptrace_report_syscall_entry/exit()
entry: Rework syscall_exit_to_user_mode_work() for architecture reuse
entry: Remove unused syscall argument from syscall_trace_enter()
sched: remove task_struct->faults_disabled_mapping
sched: Update rq->avg_idle when a task is moved to an idle CPU
selftests/rseq: Add rseq slice histogram script
hrtimer: Fix trace oddity
...
|
|
To initialize node, zone and memory map data structures every architecture
calls free_area_init() during setup_arch() and passes it an array of zone
limits.
Beside code duplication it creates "interesting" ordering cases between
allocation and initialization of hugetlb and the memory map. Some
architectures allocate hugetlb pages very early in setup_arch() in certain
cases, some only create hugetlb CMA areas in setup_arch() and sometimes
hugetlb allocations happen mm_core_init().
With arch_zone_limits_init() helper available now on all architectures it
is no longer necessary to call free_area_init() from architecture setup
code. Rather core MM initialization can call arch_zone_limits_init() in a
single place.
This allows to unify ordering of hugetlb vs memory map allocation and
initialization.
Remove the call to free_area_init() from architecture specific code and
place it in a new mm_core_init_early() function that is called immediately
after setup_arch().
After this refactoring it is possible to consolidate hugetlb allocations
and eliminate differences in ordering of hugetlb and memory map
initialization among different architectures.
As the first step of this consolidation move hugetlb_bootmem_alloc() to
mm_core_early_init().
Link: https://lkml.kernel.org/r/20260111082105.290734-24-rppt@kernel.org
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Alex Shi <alexs@kernel.org>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: "Borislav Petkov (AMD)" <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David Hildenbrand <david@kernel.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Klara Modin <klarasmodin@gmail.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Magnus Lindholm <linmag7@gmail.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Pratyush Yadav <pratyush@kernel.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: "Ritesh Harjani (IBM)" <ritesh.list@gmail.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vineet Gupta <vgupta@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Move calculations of zone limits to a dedicated arch_zone_limits_init()
function.
Later MM core will use this function as an architecture specific callback
during nodes and zones initialization and thus there won't be a need to
call free_area_init() from every architecture.
Link: https://lkml.kernel.org/r/20260111082105.290734-23-rppt@kernel.org
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Alex Shi <alexs@kernel.org>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: "Borislav Petkov (AMD)" <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David Hildenbrand <david@kernel.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Klara Modin <klarasmodin@gmail.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Magnus Lindholm <linmag7@gmail.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Pratyush Yadav <pratyush@kernel.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: "Ritesh Harjani (IBM)" <ritesh.list@gmail.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vineet Gupta <vgupta@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Provide a new syscall which has the only purpose to yield the CPU after the
kernel granted a time slice extension.
sched_yield() is not suitable for that because it unconditionally
schedules, but the end of the time slice extension is not required to
schedule when the task was already preempted. This also allows to have a
strict check for termination to catch user space invoking random syscalls
including sched_yield() from a time slice extension region.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20251215155708.929634896@linutronix.de
|
|
Remove <linux/hex.h> from <linux/kernel.h> and update all users/callers of
hex.h interfaces to directly #include <linux/hex.h> as part of the process
of putting kernel.h on a diet.
Removing hex.h from kernel.h means that 36K C source files don't have to
pay the price of parsing hex.h for the roughly 120 C source files that
need it.
This change has been build-tested with allmodconfig on most ARCHes. Also,
all users/callers of <linux/hex.h> in the entire source tree have been
updated if needed (if not already #included).
Link: https://lkml.kernel.org/r/20251215005206.2362276-1-rdunlap@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Yury Norov (NVIDIA) <yury.norov@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "mm: folio_zero_user: clear page ranges", v11.
This series adds clearing of contiguous page ranges for hugepages.
The series improves on the current discontiguous clearing approach in two
ways:
- clear pages in a contiguous fashion.
- use batched clearing via clear_pages() wherever exposed.
The first is useful because it allows us to make much better use of
hardware prefetchers.
The second, enables advertising the real extent to the processor. Where
specific instructions support it (ex. string instructions on x86; "mops"
on arm64 etc), a processor can optimize based on this because, instead of
seeing a sequence of 8-byte stores, or a sequence of 4KB pages, it sees a
larger unit being operated on.
For instance, AMD Zen uarchs (for extents larger than LLC-size) switch to
a mode where they start eliding cacheline allocation. This is helpful not
just because it results in higher bandwidth, but also because now the
cache is not evicting useful cachelines and replacing them with zeroes.
Demand faulting a 64GB region shows performance improvement:
$ perf bench mem mmap -p $pg-sz -f demand -s 64GB -l 5
baseline +series
(GBps +- %stdev) (GBps +- %stdev)
pg-sz=2MB 11.76 +- 1.10% 25.34 +- 1.18% [*] +115.47% preempt=*
pg-sz=1GB 24.85 +- 2.41% 39.22 +- 2.32% + 57.82% preempt=none|voluntary
pg-sz=1GB (similar) 52.73 +- 0.20% [#] +112.19% preempt=full|lazy
[*] This improvement is because switching to sequential clearing
allows the hardware prefetchers to do a much better job.
[#] For pg-sz=1GB a large part of the improvement is because of the
cacheline elision mentioned above. preempt=full|lazy improves upon
that because, not needing explicit invocations of cond_resched() to
ensure reasonable preemption latency, it can clear the full extent
as a single unit. In comparison the maximum extent used for
preempt=none|voluntary is PROCESS_PAGES_NON_PREEMPT_BATCH (32MB).
When provided the full extent the processor forgoes allocating
cachelines on this path almost entirely.
(The hope is that eventually, in the fullness of time, the lazy
preemption model will be able to do the same job that none or
voluntary models are used for, allowing us to do away with
cond_resched().)
Raghavendra also tested previous version of the series on AMD Genoa and
sees similar improvement [1] with preempt=lazy.
$ perf bench mem map -p $page-size -f populate -s 64GB -l 10
base patched change
pg-sz=2MB 12.731939 GB/sec 26.304263 GB/sec 106.6%
pg-sz=1GB 26.232423 GB/sec 61.174836 GB/sec 133.2%
This patch (of 8):
Let's drop all variants that effectively map to clear_page() and provide
it in a generic variant instead.
We'll use the macro clear_user_page to indicate whether an architecture
provides it's own variant.
Also, clear_user_page() is only called from the generic variant of
clear_user_highpage(), so define it only if the architecture does not
provide a clear_user_highpage(). And, for simplicity define it in
linux/highmem.h.
Note that for parisc, clear_page() and clear_user_page() map to
clear_page_asm(), so we can just get rid of the custom clear_user_page()
implementation. There is a clear_user_page_asm() function on parisc, that
seems to be unused. Not sure what's up with that.
Link: https://lkml.kernel.org/r/20260107072009.1615991-1-ankur.a.arora@oracle.com
Link: https://lkml.kernel.org/r/20260107072009.1615991-2-ankur.a.arora@oracle.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Co-developed-by: Ankur Arora <ankur.a.arora@oracle.com>
Signed-off-by: Ankur Arora <ankur.a.arora@oracle.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Ankur Arora <ankur.a.arora@oracle.com>
Cc: "Borislav Petkov (AMD)" <bp@alien8.de>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: David Hildenbrand <david@kernel.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Konrad Rzessutek Wilk <konrad.wilk@oracle.com>
Cc: Lance Yang <ioworker0@gmail.com>
Cc: "Liam R. Howlett" <Liam.Howlett@oracle.com>
Cc: Li Zhe <lizhe.67@bytedance.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Mateusz Guzik <mjguzik@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Raghavendra K T <raghavendra.kt@amd.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The "SYSCALL_MAX_ARGS" appears to have been unused since
commit 32d92586629a ("syscalls: Remove start and number from
syscall_set_arguments() args"), so remove it.
Fixes: 32d92586629a ("syscalls: Remove start and number from syscall_set_arguments() args")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
access_ok() is used only in user mode and
branches to .Linvalid_instruction on fault.
Kernel mode skips access_ok().
Tested-by: Ricky Ringler <richard.rringler@gmail.com>
Signed-off-by: Ricky Ringler <richard.rringler@gmail.com>
Message-ID: <20251215143323.2771889-1-richard.rringler@gmail.com>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
|
