| Age | Commit message (Collapse) | Author |
|---|
|
Subsystem restart (SSR) for a qaic device means that a NSP has crashed,
and will be restarted. However the restart process will lose any state
associated with activation, so the user will need to do some recovery.
While SSR has the provision to collect a crash dump, this patch does not
implement support for it.
Co-developed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Co-developed-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Signed-off-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Co-developed-by: Troy Hanson <quic_thanson@quicinc.com>
Signed-off-by: Troy Hanson <quic_thanson@quicinc.com>
Co-developed-by: Aswin Venkatesan <aswivenk@qti.qualcomm.com>
Signed-off-by: Aswin Venkatesan <aswivenk@qti.qualcomm.com>
Signed-off-by: Jeffrey Hugo <jhugo@codeaurora.org>
Signed-off-by: Youssef Samir <youssef.abdulrahman@oss.qualcomm.com>
Signed-off-by: Zack McKevitt <zachary.mckevitt@oss.qualcomm.com>
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
[jhugo: Fix minor checkpatch whitespace issues]
Signed-off-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Link: https://patch.msgid.link/20251031174059.2814445-3-zachary.mckevitt@oss.qualcomm.com
|
|
Expose sysfs files for each DBC representing the current state of that DBC.
For example, sysfs for DBC ID 0 and accel minor number 0 looks like this,
/sys/class/accel/accel0/dbc0_state
Following are the states and their corresponding values,
DBC_STATE_IDLE (0)
DBC_STATE_ASSIGNED (1)
DBC_STATE_BEFORE_SHUTDOWN (2)
DBC_STATE_AFTER_SHUTDOWN (3)
DBC_STATE_BEFORE_POWER_UP (4)
DBC_STATE_AFTER_POWER_UP (5)
Signed-off-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Signed-off-by: Youssef Samir <youssef.abdulrahman@oss.qualcomm.com>
Signed-off-by: Zack McKevitt <zachary.mckevitt@oss.qualcomm.com>
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Signed-off-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Link: https://patch.msgid.link/20251031174059.2814445-2-zachary.mckevitt@oss.qualcomm.com
|
|
AIC100 devices generates Reliability, Availability, Serviceability events
via MHI QAIC_STATUS channel. Support such events and print a structured
log with details of the events, and if the event describes an uncorrected
error, reset the device to put it back into service. As these events may
not all be reported via other mechanisms like AER, maintain counts of
the number of errors observed for each type.
Signed-off-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Troy Hanson <quic_thanson@quicinc.com>
Reviewed-by: Maciej Falkowski <maciej.falkowski@linux.intel.com>
Link: https://lore.kernel.org/r/20250516160634.1408309-1-jeff.hugo@oss.qualcomm.com
|
|
The AIC100 secondary bootloader uses the Sahara protocol for two
purposes - loading the runtime firmware images from the host, and
offloading crashdumps to the host. The crashdump functionality is only
invoked when the AIC100 device encounters a crash and dumps are enabled.
Also the collection of the dump is optional - the host can reject
collecting the dump.
The Sahara protocol contains many features and modes including firmware
upload, crashdump download, and client commands. For simplicity,
implement the parts of the protocol needed for loading firmware to the
device.
Fundamentally, the Sahara protocol is an embedded file transfer
protocol. Both sides negotiate a connection through a simple exchange of
hello messages. After handshaking through a hello message, the device
either sends a message requesting images, or a message advertising the
memory dump available for the host. For image transfer, the remote device
issues a read data request that provides an image (by ID), an offset, and
a length. The host has an internal mapping of image IDs to filenames. The
host is expected to access the image and transfer the requested chunk to
the device. The device can issue additional read requests, or signal that
it has consumed enough data from this image with an end of image message.
The host confirms the end of image, and the device can proceed with
another image by starting over with the hello exchange again.
Some images may be optional, and only provided as part of a provisioning
flow. The host is not aware of this information, and thus should report
an error to the device when an image is not available. The device will
evaluate if the image is required or not, and take the appropriate
action.
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com>
Reviewed-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240322034917.3522388-1-quic_jhugo@quicinc.com
|
|
During the boot process of AIC100, the bootloaders (PBL and SBL) log
messages to device RAM. During SBL, if the host opens the QAIC_LOGGING
channel, SBL will offload the contents of the log buffer to the host,
and stream any new messages that SBL logs.
This log of the boot process can be very useful for an initial triage of
any boot related issues. For example, if SBL rejects one of the runtime
firmware images for a validation failure, SBL will log a reason why.
Add the ability of the driver to open the logging channel, receive the
messages, and store them. Also define a debugfs entry called "bootlog"
by hooking into the DRM debugfs framework. When the bootlog debugfs
entry is read, the current contents of the log that the host is caching
is displayed to the user. The driver will retain the cache until it
detects that the device has rebooted. At that point, the cache will be
freed, and the driver will wait for a new log. With this scheme, the
driver will only have a cache of the log from the current device boot.
Note that if the driver initializes a device and it is already in the
runtime state (QSM), no bootlog will be available through this mechanism
because the driver and SBL have not communicated.
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com>
Reviewed-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240322175730.3855440-2-quic_jhugo@quicinc.com
|
|
Device and Host have a time synchronization mechanism that happens once
during boot when device is in SBL mode. After that, in mission-mode there
is no timesync. In an experiment after continuous operation, device time
drifted w.r.t. host by approximately 3 seconds per day. This drift leads
to mismatch in timestamp of device and Host logs. To correct this
implement periodic timesync in driver. This timesync is carried out via
QAIC_TIMESYNC_PERIODIC MHI channel.
Signed-off-by: Ajit Pal Singh <quic_ajitpals@quicinc.com>
Signed-off-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com>
Reviewed-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231016170114.5446-2-quic_jhugo@quicinc.com
|
|
This reverts commit 566fc96198b4bb07ca6806386956669881225271.
This exposes a userspace API that is still under debate. Revert the
change before the uAPI gets exposed to avoid making a mistake. QAIC is
otherwise still functional.
Suggested-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1681307864-3782-1-git-send-email-quic_jhugo@quicinc.com
|
|
Now that we have all the components of a minimum QAIC which can boot and
run an AIC100 device, add the infrastructure that allows the QAIC driver
to be built.
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com>
Reviewed-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Acked-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1679932497-30277-8-git-send-email-quic_jhugo@quicinc.com
|
