| Age | Commit message (Collapse) | Author |
|
Merge ACPI CPPC library fixes and cpufreq fixes for 7.4-rc1:
- Drop compliance checks involving nominal performance from the ACPI
CPPC library to unbreak the CPPC sysfs interface and the intel_pstate
driver on some Intel platforms after a recent change that added those
checks (Rafael Wysocki)
- Make the ACPI CPPC library reject EPP registers that are too small to
store all of the possible EPP values (Christian Loehle)
- Make cpufreq_driver_target() skip inactive policies to avoid a NULL
pointer dereference on a frequency table access attempt (Zhongqiu Han)
- Set the CPPC Enable register in cpu_init() in the CPPC cpufreq driver
to enable CPPC on platforms that wait for the OS to enable it (Sumit
Gupta)
* acpi-cppc-fixes:
ACPI: CPPC: Drop compliance checks involving nominal performance
ACPI: CPPC: Reject EPP registers narrower than 8 bits
* pm-cpufreq-fixes:
cpufreq: Skip inactive policies in cpufreq_driver_target()
cpufreq: CPPC: Set CPPC Enable register in cpu_init()
|
|
Commit 2f4ddf2bd1ba ("ACPI: scan: Stop calling acpi_bus_init_power()
early") removed a device presence check from acpi_bus_init_power() which
in some cases causes power management to be initialized for an ACPI
device object and never used going forward. That in turn may prevent
power management from working as expected for other devices.
Namely, if a given ACPI device object is not enabled according to its
_STA, find_child_checks() will return an error for it which will prevent
it from being used as an ACPI companion for a PCI device. Thus if
acpi_device_init_power() initializes power management for it and its
initial power state turns out to be different from D3cold, it may stay
in that power state forever. If it has power resources and they are
"on" during the initialization, they may be reference-counted and never
turned off. If they are shared with other devices, they will prevent
power from going down after attempting to put the other devices into
low-power states.
To prevent that from happening, restore the device presence check in
acpi_bus_init_power(), but also adjust find_child_checks() to return
an error for absent devices (instead of doing that for disabled devices)
in accordance with acpi_bus_init_power() and the existing check in
acpi_bus_attach().
Fixes: 2f4ddf2bd1ba ("ACPI: scan: Stop calling acpi_bus_init_power() early")
Reported-by: Alan Borzeszkowski <alan.borzeszkowski@linux.intel.com>
Tested-by: Alan Borzeszkowski <alan.borzeszkowski@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Link: https://patch.msgid.link/13013440.O9o76ZdvQC@rafael.j.wysocki
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
On a number of Intel platforms in the field, the nominal performance
value in ACPI _CPC (which is an integer embedded in the _CPC package)
is less than the guaranteed performance value, and it may even be less
than the minimum nonlinear performance value or greater than the highest
performance value (that all come from register reads).
The new specification compliance checks involving those values added
by commit 32299b29a887 ("ACPI: CPPC: Validate _CPC entry and control
semantics") cause the CPPC library to refuse to work for some CPUs
on the affected systems which in turn causes the intel_pstate driver
to overestimate the maximum performance levels for those CPUs. One
of the affected systems is Dell Pro 5 14 P514260.
In this particular case, the fact that the specification is not
exactly followed has no implications and the checks enforcing
compliance are not really useful, so drop the checks in question
from the CPPC library.
If really necessary, they will need to be done elsewhere.
Fixes: 32299b29a887 ("ACPI: CPPC: Validate _CPC entry and control semantics")
Reviewed-by: Christian Loehle <christian.loehle@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/6060382.DvuYhMxLoT@rafael.j.wysocki
|
|
The EPP interfaces use an 8-bit preference, but ACPI permits narrower
fields. With a 4- or 6-bit SystemMemory field, writing 128 succeeds but
stores zero, requesting maximum performance instead.
Reject a present EPP register narrower than eight bits during _CPC probe.
Use the existing error path to release previously acquired resources and
leave the CPU's CPPC descriptor unpublished. Keep absent EPP entries and
registers at least eight bits wide on their existing paths.
Fail the whole probe instead of disabling only EPP. This also makes
amd-pstate's acpi_cpc_valid() check reject the platform before registering
its MSR or shared-memory driver. No affected hardware is known or
expected and the specification is expected to no longer permit these
in the future [1].
Fixes: 922607a2b462 ("cpufreq: CPPC: Add support for autonomous selection")
Link: https://github.com/tianocore/edk2/issues/10838 [1]
Signed-off-by: Christian Loehle <christian.loehle@arm.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Cc: All applicable <stable@vger.kernel.org>
[ rjw: Changelog tweak ]
Link: https://patch.msgid.link/20261113130411.1433174-1-christian.loehle@arm.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These fix a mistake in the ACPI APEI GHES code causing recoverable
CPU, memory, CXL and vendor-specific errors reported through GHES to
never show up in a vmcore, address a potential deadlock related to
ACPI device hotplug that causes lockdep to complain and give up, and
fix up the recently added support for _Ixx GPEs:
- Make recoverable CPU, memory, CXL and vendor-specific errors
reported through GHES show up in vmcores by fixing a broken error
severity check in ghes_log_hwerr() (Breno Leitao)
- Avoid printing diagnostic messages for ACPI device objects after
dropping reference to them (Sasha Levin)
- Avoid holding the physical_node_lock for ACPI device objects across
device_offline() and device_online() due to a potential deadlock
that causes lockdep to complain and turn itself off (Sasha Levin)
- Avoid spurious system wakeups from suspend-to-idle on platforms
where an _Ixx GPE is shared by user-wakeup and background events
(Saranya Gopal)"
* tag 'acpi-7.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: s2idle: Handle shared _Ixx GPEs without an EC
ACPI: APEI: GHES: Fix severity check in ghes_log_hwerr()
ACPI: scan: Do not hold physical_node_lock across device_offline() and device_online()
ACPI: scan: Print the offline failure message in acpi_bus_offline()
|
|
Merge core ACPI support code fixes and an ACPI APEI fix for 7.4-rc3:
- Avoid printing diagnostic messages for ACPI device objects after
dropping reference to them (Sasha Levin)
- Avoid holding the physical_node_lock for ACPI device objects across
device_offline() and device_online() due to a potential deadlock that
causes lockdep to complain and turn itself off (Sasha Levin)
- Make recoverable CPU, memory, CXL and vendor-specific errors reported
through GHES show up in vmcores by fixing a broken error severity
check in ghes_log_hwerr() (Breno Leitao)
* acpi-scan:
ACPI: scan: Do not hold physical_node_lock across device_offline() and device_online()
ACPI: scan: Print the offline failure message in acpi_bus_offline()
* acpi-apei:
ACPI: APEI: GHES: Fix severity check in ghes_log_hwerr()
|
|
START and END device entries in ACPI IOVT should be paired and
adjacent, while SINGLE entries shouldn't be between START and END.
So add a iovt_validate_entries() function to validate the entries
before the real parsing.
By the way, move kzalloc_obj() from the ACPI_IOVT_DEVICE_ENTRY_END
case to the ACPI_IOVT_DEVICE_ENTRY_START case, so as to avoid NULL
pointer dereference.
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Checksum information is put in acpi_table_header, here add checksum
validation support with IOVT table.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
In acpi_iovt_init(), hdr is of type struct acpi_table_iovt *. Passing
&hdr results in a pointer to the local variable rather than a pointer
to the IOVT table. Drop the address-of operator and pass hdr directly.
Cc: stable@vger.kernel.org
Fixes: a9b0c34507eb ("ACPI: LoongArch: Add acpi_arch_[late]_init()")
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
When first_ec is NULL, acpi_ec_dispatch_gpe() previously treated any
active GPE as a wake source. On platforms where an _Ixx GPE is shared
by user-wakeup and background events, that can cause unnecessary
wakeups.
Make acpi_ec_dispatch_gpe() return an int and return -ENODEV when no
EC instance is available so that acpi_s2idle_wake() can handle that
case: on x86, treat the first GPE armed for wake via an _Ixx method
like the EC GPE, mirroring acpi_ec_dispatch_gpe(). That is, report a
wakeup if the status bit is set for any enabled GPE other than the
_Ixx one. Otherwise, cancel the SCI-related wakeup and dispatch the
_Ixx GPE if its status bit is set, so the events behind it can be
processed. Drivers handling genuine wake events are expected to
report them via pm_wakeup_event(), which the common s2idle path will
catch after synchronizing event processing.
If no _Ixx GPEs have been armed, and in the non-x86 fallback, the
previous any-GPE status check is retained. If GPEs are armed via more
than one _Ixx method, the first one is used as the wake indicator and
the remaining ones are treated as regular wake sources.
Fixes: 46767b17fda3 ("ACPI: PM: s2idle: Add _Ixx GPE wake indicator support")
Signed-off-by: Saranya Gopal <saranya.gopal@intel.com>
Link: https://patch.msgid.link/20261106125814.1112331-1-saranya.gopal@intel.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Mirroring the earlier kmalloc_obj() conversion, convert the
device-managed allocators over to the type-based API using the now
updated scripts/coccinelle/api/kmalloc_objs.cocci. The size is derived
from the type rather than written out as a sizeof(), and the result is
a pointer to that type rather than void *, so a mismatch between the
size requested and the variable assigned becomes a build error instead
of being silently accepted.
The conversions break down as:
6713 devm_kzalloc_obj()
1749 devm_kzalloc_objs()
307 devm_kzalloc_flex()
91 devm_kmalloc_objs()
82 devm_kmalloc_obj()
2 devm_kmalloc_flex()
The rules deliberately leave alone allocations sized by a string or a
byte-sized type, or assigned to a pointer to a byte-sized type, since
those are byte buffers rather than objects. Allocations sized by a
multi-byte integer type are only converted when they are assigned to a
pointer to that same type, and allocations of pointers to integers or of
void pointers are left alone too. After this change, 528 files still
call devm_kmalloc(), devm_kzalloc(), devm_kcalloc(), or
devm_kmalloc_array().
Build tested with allmodconfig on x86_64, arm64, i386, arm, riscv, s390,
m68k, mips, parisc, sparc, loongarch, arc, xtensa, and openrisc with GCC
16.2.0 with no new warnings.
Signed-off-by: Kees Cook <kees+treewide@kernel.org>
|
|
Refresh the tree with run of the existing Coccinelle rules in
scripts/coccinelle/api/kmalloc_objs.cocci, now that they also convert
arrays of multi-byte integers.
The conversions break down as:
435 kzalloc_objs()
169 kmalloc_objs()
52 kvzalloc_objs()
47 kzalloc_obj()
42 kvmalloc_objs()
8 kmalloc_obj()
2 kzalloc_flex()
2 kvmalloc_flex()
and 37 existing kmalloc_obj() family calls drop a redundant GFP_KERNEL.
Build tested with allmodconfig on x86_64 with GCC 16.2.0, and, together
with the devm_kmalloc_obj() conversion that follows, on x86_64, arm64,
i386, arm, riscv, s390, m68k, mips, parisc, sparc, loongarch, arc,
xtensa, and openrisc with GCC 16.2.0 with no new warnings.
Signed-off-by: Kees Cook <kees+treewide@kernel.org>
|
|
ghes_log_hwerr() is meant to count recoverable GHES errors in
hwerror_data[], but it skips them and counts informational records
instead. As a result, recoverable CPU, memory, CXL and vendor-specific
errors reported through GHES never show up in a vmcore.
ghes_do_proc() passes ghes_log_hwerr() the record severity after
ghes_severity() has converted it to a GHES_SEV_* value.
ghes_log_hwerr() compares it against CPER_SEV_RECOVERABLE, which is 0
in the CPER enum and matches GHES_SEV_NO, so only informational records
pass and GHES_SEV_RECOVERABLE ones return early.
Compare against GHES_SEV_RECOVERABLE instead.
Recoverable PCIe errors that ghes_handle_aer() hands to AER are also
counted by pci_dev_aer_stats_incr(), so with the check fixed they are
counted twice under HWERR_RECOV_PCI. That is not addressed here.
Fixes: 3fa805c37dd4 ("vmcoreinfo: track and log recoverable hardware errors")
Cc: stable@vger.kernel.org
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Shuai Xue <xueshuai@linux.alibaba.com>
Link: https://patch.msgid.link/20261030-ghes-hwerr-sev-v1-1-145ceb996c77@debian.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
device_online()
acpi_bus_offline() and acpi_bus_online() hold the physical_node_lock of
the ACPI device being hot-removed while they call device_offline() and
device_online() for its physical nodes. Offlining a CPU this way takes
cpu_add_remove_lock and the CPU hotplug lock under physical_node_lock,
and lockdep connects that to the uevent attribute of platform devices,
whose store method takes physical_node_lock in
acpi_primary_dev_companion():
physical_node_lock (acpi_bus_offline())
-> cpu_add_remove_lock -> cpu_hotplug_lock
-> cpuhp_state-down (mce_cpu_pre_down() unregistering a device)
-> device_links_lock (device_links_purge())
-> kn->active of a uevent attribute (device link unregistration)
-> physical_node_lock (uevent_store() -> acpi_companion_match())
syzbot has reported this cycle twice. The uevent attribute waited for in
the link unregistration is the device link's, not a platform device's,
and the physical_node_lock taken at the end is that of the platform
device's ACPI companion, not of the processor being ejected, so lockdep
only connects them because they share lock classes and this is unlikely
to deadlock. However, lockdep turns itself off after reporting it.
It can be reproduced in a QEMU guest by writing to the uevent attribute
of an ACPI-enumerated platform device, reading the uevent attribute of a
device link while the link is removed, offlining a CPU and ejecting one
through sysfs.
physical_node_lock protects the list of physical nodes. Since
acpi_unbind_one() blocks on it, holding it also keeps device_offline()
and device_online() from running in parallel with whatever happens to a
device after it has been unbound from its ACPI companion, but that is not
necessary: a reference to each device is held while the lock is dropped,
and the removal of the devices that can actually be taken offline here
(CPUs, memory blocks and containers) is serialized by the device hotplug
lock or acpi_scan_lock, both of which acpi_device_hotplug() holds
throughout.
So drop physical_node_lock around device_offline() and device_online().
Mark the nodes to offline with a new offline_pending flag, hold a
reference to each device while the lock is dropped, and look its node up
again afterwards to record whether it needs to be put back online,
because it may have been unbound in the meantime. Physical nodes added
while the lock is not held are not offlined by the current pass, which is
no different from adding them right after it.
Since acpi_container_offline() no longer runs under the container's
physical_node_lock, the nesting annotation added to
acpi_scan_is_offline() by commit 4c533c801d1c ("ACPI / scan: Annotate
physical_node_lock in acpi_scan_is_offline()") is not needed anymore, so
drop it.
Fixes: 683058e315f0 ("ACPI / hotplug: Use device offline/online for graceful hot-removal")
Reported-by: syzbot+cea7285bc17b76ffe39f@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/r/6ae18ed0.6200f071.51519.0f60.GAE@google.com
Reported-by: syzbot+a265816368571f78ab88@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/r/6adf293a.67317f00.38c4bc.00af.GAE@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Link: https://patch.msgid.link/20261029034507.2721580-3-sashal@kernel.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
When a physical node of an ACPI device being hot-removed cannot be
offlined, acpi_bus_offline() passes the physical device back to
acpi_scan_try_to_offline() through ret_p and the latter prints
"Offline failed." for it after the namespace walk. By then
physical_node_lock is not held anymore, so the device may have been
unbound from its ACPI companion and freed in the meantime.
Print the message in acpi_bus_offline() when device_offline() fails in
the second pass, while physical_node_lock keeps the device bound to its
ACPI companion and so the reference taken by acpi_bind_one() is still
held. acpi_scan_try_to_offline() only needs to know that something
could not be offlined, so pass the ACPI device back through ret_p
instead, like in the "Offline disabled." case.
Fixes: 303bfdb1a14d ("ACPI / scan: Add second pass of companion offlining to hot-remove code")
Suggested-by: Rafael J. Wysocki <rafael@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Link: https://patch.msgid.link/20261029034507.2721580-2-sashal@kernel.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI support fixes from Rafael Wysocki:
"These address assorted issues in ACPI support code and work around
concurrency-related issues in AML on some platforms:
- Separate handler locking from sysfs lifetime in the ACPI platform
profile driver to avoid possible deadlocks due to sysfs accesses
during driver removal (Daniel Lezcano)
- Introduce additional locking around the evaluation of selected ACPI
control methods in a few places to work around issues related to
concurrency in AML on some platforms (Ali Ahmet Memiş)
- Address two issues reported by Sashiko in the ACPI table data sysfs
interface (Jamie Nguyen)
- Initialize parser_state.aml_end in acpi_install_method() properly
to avoid out-of-bounds accesses during control method installation
(Ivan Hu)"
* tag 'acpi-7.4-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: sysfs: Finish sysfs init when creating a table file fails
ACPI: sysfs: Map only the requested range in acpi_data_show()
ACPICA: Initialize parser_state.aml_end in acpi_install_method()
ACPI: platform_profile: Separate handler locking from sysfs lifetime
platform/x86: ideapad-laptop: Evaluate ACPI methods exclusively
thermal: intel: int340x: Evaluate _TMP exclusively
ACPI: battery: Evaluate battery methods exclusively
ACPI: utils: Add exclusive AML evaluation helpers
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch updates from Huacai Chen:
- Add LoongArch-specific ACPI initialization
- Set NX compat flag in PE/COFF efi header
- Use pa_to_nid()/nid_to_addrbase() rather than hard-code
- Detect and expose LAMCAS/DIV32 feature existence
- Fix and improve perf hardware breakpoints
- Fix and improve BPF JIT (trampoline and 32-bit operations)
- Add arch_crash_save_vmcoreinfo() support
- Some bug fixes and other small changes
* tag 'loongarch-7.4' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson: (24 commits)
soc: loongson: loongson2_guts: Use of_root instead of own reference
soc: loongson: loongson2_pm: Fix build warnings for 32BIT
LoongArch: dts: loongson-2k0500: Drop unsupported bus_id in DWMAC
LoongArch: BPF: Optimize 32-bit operations using native instructions
LoongArch: BPF: Clean up and decouple is32 parameter from move_imm()
LoongArch: BPF: Fix stack arguments for indirect trampolines
LoongArch: Add arch_crash_save_vmcoreinfo() support
LoongArch: Fix one-shot limitation for perf hardware breakpoints
LoongArch: Fix perf hardware breakpoint failure via installation
LoongArch: Only send SIGTRAP signal if necessary in do_watch()
LoongArch: Fix architectural naming typo for CSR_FWPS_SKIP
LoongArch: Fix bitmask corruption in update_bp_registers()
LoongArch: Remove redundant call in update_bp_registers()
LoongArch: Remove arch-specific __smp_mb__{before,after}_atomic()
LoongArch: Detect and expose DIV32 feature existence
LoongArch: Detect and expose LAMCAS feature existence
LoongArch: Use pa_to_nid()/nid_to_addrbase() rather than hard-code
LoongArch: Don't init & online empty nodes
LoongArch: Call cpu_final_simd() with pure_initcall()
LoongArch: Use assign_bit() API where applicable
...
|
|
Merge additional updates related to ACPI support in device drivers and
ACPI sysfs interface fixes for 7.4-rc1:
- Separate handler locking from sysfs lifetime in the ACPI platform
profile driver (Daniel Lezcano)
- Introduce additional locking around the evaluation of selected ACPI
control methods in a few places to work around issues related to
concurrency in AML on some platforms (Ali Ahmet Memiş)
- Address two issues reported by Sashiko in the ACPI table data sysfs
interface (Jamie Nguyen)
* acpi-driver:
ACPI: platform_profile: Separate handler locking from sysfs lifetime
platform/x86: ideapad-laptop: Evaluate ACPI methods exclusively
thermal: intel: int340x: Evaluate _TMP exclusively
ACPI: battery: Evaluate battery methods exclusively
ACPI: utils: Add exclusive AML evaluation helpers
* acpi-sysfs:
ACPI: sysfs: Finish sysfs init when creating a table file fails
ACPI: sysfs: Map only the requested range in acpi_data_show()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Paul Walmsley:
- Add support for crash hotplug
- Improve user copy performance on cores with fast misaligned accesses
- Optimize code paths involving pgtable_l{4,5}_enabled() by patching in
the return values during early boot (since these don't change during
runtime), or by specifying the return values directly in Kconfig
files (for purpose-built kernels)
- Change the PCIe bus reassignment behavior to depend on the
PCI_REASSIGN_ALL_BUS PCI flag (as ARM64 does)
- Avoid an unnecessary sstatus CSR read during context switch
- Make the sbi_ecall() macro variadic, improving code clarity
- Refactor __switch_to_vector() to prepare for upcoming vector context
switch optimizations
- Add a kselftest for vectorized user copy
- Add bounds checking on the shadow stack restore token address to
avoid it being used as an attack vector
- Fix the shadow stack and indirect branch landing pad control
functions to only update the CPU's envcfg CSR when operating on the
current task
- For MIPS RISC-V systems, add support for early boot-applied errata;
and for P8700 RISC-V systems, avoid WFI usage in the kernel (since it
is buggy)
- Add the "B" RISC-V ISA extension to hwcap and hwprobe reporting
- Add support for specifying and reporting the "Zic64b" RISC-V ISA
extension, and add it to the SpacemiT K1, K3, and Sophgo SG2044 DT
files
- Require the block size of cache management operations to be specified
in DT schema validation for the RISC-V ISA extensions Zicbom, Zicbop,
and Zicboz
- Some miscellaneous fixes: fix an incorrect bitfield width in the
RVG_SYSTEM_CSR_MASK bitmask macro; make RISCV_ALTERNATIVE mandatory,
now that XIP kernel support has been removed; and remove some
unnecessary includes in kernel/smp.c
* tag 'riscv-for-linus-7.4-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (28 commits)
riscv: mm: unexport _pgtable_l4_enabled and _pgtable_l5_enabled
riscv: introduce RISCV_ISA_SV48 and RISCV_ISA_SV57
riscv: support early isa ext and use it to optimize pgtable_l4|l5_enabled
riscv: convert pgtable_l4|l5_enabled to inline function
riscv: remove RISCV_ALTERNATIVE Kconfig option
riscv: Add a getter for user PMLEN support
riscv: dts: sophgo: sg2044: Add Zic64b ISA extension
riscv: dts: spacemit: k1: Add Zic64b ISA extension
riscv: dts: spacemit: k3: Add Zic64b ISA extension
riscv: Add Zic64b to cpufeature and hwprobe
dt-bindings: riscv: Add Zic64b extension description
dt-bindings: riscv: Require block-size for Zicbom, Zicbop, and Zicboz
riscv: Add B to hwcap and hwprobe
riscv: remove unused profile.h includes
riscv: cfi: Only write envcfg CSR when task is current
riscv: cfi: Bounds check restore token before swap
riscv: Add ERRATA_MIPS_P8700_WFI to replace WFI with mips.pause
selftest: riscv: test vectorized user copy
riscv: vector: refactor context switch for kernel-mode vector
riscv: do not read csr in vector context switch
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Ilpo Järvinen:
"The usual updates for laptop quirks from HP, ASUS, Acer, Dell etc:
- new model names and recent CPU support
- more special button / function key handling
- battery and hardware monitoring quirks
Tool updates to intel-speed-select
WMI now supports non-x86 architectures
Miscellaneous cleanups / refactoring / improvements"
* tag 'platform-drivers-x86-v7.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (237 commits)
platform/x86: asus-wmi: name the TUF keyboard RGB state and speed codes
platform/x86: asus-wmi: fix TUF keyboard power state shutdown naming
platform/x86: asus-wmi: rename TUF RGB state DEVID to _CMD
platform/x86: asus-armoury: add power limits quirk for GU605CM
platform/x86: asus-armoury: add power limits quirk for G533QS
platform/x86: asus-armoury: add power limits quirk for GA402NV
platform/x86: asus-armoury: add power limits quirk for FA608UP
platform/x86: asus-armoury: add power limits quirk for FA608UH
platform/x86: asus-armoury: add power limits quirk for FA608PM
platform/x86: asus-armoury: add power limits quirk for G713QR
platform/x86: ibm_rtl: Fix potential OOB read at signature search
platform/x86: acer-wmi: Add support for Acer Nitro AN16-41
platform/x86: acer-wmi: Cycle platform profile on mode key 0x4
platform/x86: hp-wmi: Disable hwmon attributes when no fans are usable
platform/x86: gpd pocket fan: Cancel work before releasing GPIOs
platform/x86: asus-armoury: Add XBOX ROG Ally X 20 Tunables
platform/x86: msi-wmi: Ignore WMI events for keys also handled by atkbd
platform/x86: msi-wmi: Sort scancodes numerically
platform: arm64: Add a driver for the EC found on ASUS Glymur machines
MAINTAINERS: Add myself as a LENOVO drivers co-maintainer
...
|
|
acpi_iommu_configure_id() currently only supports IORT and VIOT. Add
support for LoongArch's IOVT as well.
Acked-by: Rafael J. Wysocki (Intel) <rafael@kernel.org>
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
LoongArch IOMMU scanning flow is similar with virtio-iommu, there is an
early init phase and a late init phase. In the early init function, PCI
ACS is enabled if there is IOMMU table, and the late init function is
called after PCI device scanning, where IOVT table scanning function is
executed.
Here add acpi_arch_init() and acpi_arch_late_init() API for LoongArch:
the acpi_iovt_init() function is to enable PCI ACS function if the IOMMU
device exists in IOVT table; while the acpi_iovt_late_init() function is
to scan IOVT table and add IOMMU devices.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"The AI flood continues, which brought us a fairly busy development
cycle again with changes spread across the subsystem, ranging from
(lots of) core hardening to new platforms and codecs.
Here are some highlights.
ALSA core:
- PCM: race fixes around channel-map controls, draining/unlink, drop
sync-stop handling, and DMA buffer delay sync
- Compress-offload: state and geometry validations, buffer leak fix,
and stream/card lifetime management
- Jack: module pinning during debugfs access, control removal race
fix, and early injection exposure
- Timer & sequencer: module pinning for user timers, RCU grace period
wait on port deletion, UMP bounds fixes
- Mark OSS sequencer emulation as deprecated
- RawMIDI: proper disconnect handling and input work drain cleanup
- Control: fixes for vmaster racy setups and control callback
serialization, UAF fix on card disconnect
ASoC core:
- Continued framework refactoring, deployment of
auto_selectable_formats across codecs and platform DAIs
- Generic card cleanup: free jack GPIOs on card remove for
simple-card and audio-graph-card variants
- SDCA improvements: SimpleJack function type support, library
helpers, and non-ACPI build support
- Conversion of deprecated DMA API calls
ASoC SOF:
- Support for compressed audio playback on SOF IPC4 with Intel TGL+
- AMD ACP 7.B / 7.F SoundWire and PDM controller support, ASP
carveout firmware loading
- Function topology support for Intel I2S machines
ASoC platforms & codecs:
- Qualcomm: New QAIF driver for Shikra platform, WCD9378 SDCA codec,
Nord Ride/RRD and Motorola Edge 30 boards, LPASS macro cache
converted to maple tree
- New codec drivers: ESS ES9039Q2M, Nuvoton NAU83G60 amplifier,
Senary SN624x SoundWire SDCA codec
- MediaTek / Airoha: New Airoha AN7581 AFE and WM8960 machine
drivers, extensive clock and error-handling cleanups across
MediaTek SoCs
- NVIDIA Tegra: WM8994 machine driver and CS35L45 MDSYNC support
- Realtek: RT766/RT767, RT721_U, RT718 variants, RT712 GPIO LED
control
- Cirrus Logic: CS35L45 MDSYNC support, CS35L56 regmap default tests
- TI: TAS2573 DSP support in TAS2781, TAS2783 SoundWire fixes
- Everest Semi: ES8326 standby / HPF controls, ES8389 / ES8375 resume
fixes
- Removal of obsolete ST-Ericsson Ux500 MOP500 machine driver
HD-audio:
- ACPI controller runtime PM suspend/resume support
- Controller shutdown and unbind race fixes for unsol events and jack
polling
- HDMI: High Bit Rate (HBR) audio capability enabled, ELD proc and
converter bounds checks
- AW88399 side codec SSID-specific firmware naming and Lenovo Legion
R9000P enablement
- Realtek / Conexant / Cirrus / TI quirks for numerous laptops
(Lenovo, ASUS, HP, Acer, HONOR, Minisforum, MSI, etc.)
- Creative CA0132 Sound BlasterX AE-5 external RGB LED strip support
USB-audio:
- Dedicated mixer driver for Audient EVO4
- Native Instruments Kore controller LCD support and keymap fix
- Pioneer DJ DDJ-SZ and Roland (OCTA-CAPTURE / QUAD-CAPTURE
multirate, TD-11) support
- UAC2/3 mixer unit matrix evaluation and bounds checking
- Hardening for LINE6 and caiaq drivers against malformed packets and
races
- Device-specific quirks for PreSonus, TASCAM, Logitech, Mayflower,
MOONDROP, Yamaha, etc.
Misc:
- Auto-cleanup conversion for snd_card_free() and devres migration
across dozens of legacy PCI, ISA, and Sparc drivers
- ALSA loopback (aloop) timer lifecycle fixes and new aloop selftest
- pcmtest driver fixes and kselftest updates"
* tag 'sound-7.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (924 commits)
ALSA: hda/realtek: Add mute and mic-mute LEDs for HP ENVY 16 (103c:8be5)
selftests: ALSA: pcmtest: Compare all captured bytes in ni_capture
ALSA: usb-audio: Use strscpy() in append_ctl_name()
ALSA: caiaq: Use strscpy() in snd_usb_caiaq_input_init()
ALSA: hiface: Use scnprintf() in hiface_chip_create()
selftests/alsa: Check the aloop PCM Slave controls for a matching playback
ALSA: aloop: Update the PCM Slave controls for a matching playback
selftests: ALSA: pcmtest: Make room for the longest fill pattern
selftests: ALSA: pcmtest: Check the frame count of each transfer
ALSA: hda/realtek: Fix speakers on COLORFUL L1 Plus
ALSA: hda/realtek: enable AW88399 on Lenovo Legion R9000P AFR10
ALSA: line6: Handle period elapsed calls outside the locks
ALSA: emux: Stop voices before freeing zones in all cases
ALSA: emux: Fix UAF of soundfont zones at note-on
ALSA: mtpav: restore negation dropped in guard() conversion
ALSA: compress: reject restarting an ACTIVE task via origin_seqno
ALSA: compress: add missing OPEN-state gate to SET_METADATA
ALSA: compress: reject buffer geometry change on gapless next_track
ALSA: compress: fix buffer leak on failed SET_PARAMS
ALSA: hda/realtek: Enable jack detection on Minisforum AI X1
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty / serial driver updates from Greg KH:
"Here is the "big" set of tty and serial driver updates for 7.4-rc1.
It's not really all that big, it's been kind of quiet in this area of
the tree this development cycle in relation to other parts of the
tree. But still, included in here are:
- 8250 port updates and fixes
- 8250 driver cleanups by Jiri
- deletion of the obsolete moxa driver (making this pull request
remove more lines than added!)
- different serial driver updates for dma and other reported issues
All of these have been in linux-next with no reported problems"
* tag 'tty-7.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (91 commits)
tty: hvc: dcc: Detect JTAG connection only on CPU core 0
serial: earlycon: Use isdigit() in earlycon_init()
serial: core: Use isdigit() in uart_parse_options()
dt-bindings: serial: snps-dw-apb-uart: Add Synaptics sl2610 uart
serial: amba-pl011: drive the bus during break in RS485 mode
serial: mcf: update author email address
serial: pmac_zilog: report received breaks
serial: pmac_zilog: push received data to the port that received it
serial: amba-pl011: keep transmitter enabled when disabling RS485
serial: ma35d1: Do not force-enable an unselected console
serial: amba-pl011: honour delay_rts_before_send for every write
Revert "serial: 8250_port: Drop duplicate NULL check"
serial: 8250: make port operations work on struct uart_8250_port
serial: 8250_omap: set priv->line before enabling the IRQ
serial: 8250_lpss: do not touch uninitialized line in ehl_serial_exit()
serial: 8250_exar: store the GPIO platform device in struct exar8250
serial: 8250_exar: remove useless void * casts
serial: 8250: drop err label from serial8250_register_8250_port()
serial: core: fix TIOCSSERIAL and TIOCSERCONFIG on uninitialised ports
serial: max310x: don't transmit while an RS485 reconfigure is pending
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull PCI updates from Bjorn Helgaas:
"Enumeration:
- Set supported_speeds in set_pcie_port_type() so sparc64 and
powerpc, which call it via of_create_pci_dev() instead of the usual
pci_setup_device(), correctly set the supported PCIe link speeds
(Stian Halseth)
- When pcie_set_mps() changes MPS, update the value in the saved
state so a subsequent restore doesn't restore an invalid value
(Niklas Cassel)
- Skip Target Speed quirk on clamped ports with no link (Maciej W.
Rozycki)
Driver binding:
- Assume control of portdrv-related features only when portdrv is
enabled, since we can't use them without portdrv (Kuppuswamy
Sathyanarayanan)
- Centralize feature ownership checking so code only needs to check
'host->native_X' and doesn't need to also check 'pcie_ports_native'
(Kuppuswamy Sathyanarayanan)
Error handling:
- Fix leaks when ACPI APEI/GHES error events overflow the kfifo or
mention a device that no longer exists (Priyank Rathod)
- Fix aer_process_err_devices() leak when a device is recorded as an
error source purely by being mentioned in the Root Port Error
Source and the device is inaccessible or logged only masked errors
(Priyank Rathod)
ASPM:
- Disable ASPM when drivers request that, even if the OS doesn't own
ASPM; otherwise drivers do it on their own, which is worse (Ilpo
Järvinen)
Power management:
- Align hibernate poweroff flow with suspend flow for bridges so they
can be powered down at hibernate as they are for suspend (Mario
Limonciello)
- Restore BARs after powering up during enumeration to fix a
regression on devices that don't preserve state in D3hot (Keng-Yu
Lin)
- Avoid D3 on PLX PEX 8532/8533/8548 downstream ports, where putting
them in D3hot takes down the whole switch (Imre Kaloz)
Power control:
- Add GPIO driver for Toshiba TC9563 embedded GPIO controller (Alex
Elder)
- Add DT documentation and pwrctrl driver support for TC9563 embedded
GPIO controller (Lorenzo Bianconi)
- Switch the tc9563 per-port reset to use the GPIO descriptor API
instead of direct regmap accesses (Lorenzo Bianconi)
- Only destroy devices created by pwrctrl core, so that when removing
a PCIe controller driver that uses pwrctrl, we don't remove devices
populated by another mechanism (Shawn Lin)
- Power off child devices on power-on failure (Lorenzo Bianconi)
PCIe native device hotplug:
- Make the 'pciehp_poll_mode' parameter read-only to prevent changes
via sysfs, which can cause errors when unbinding (Runyu Xiao)
Virtualization:
- Read SR-IOV VF Revision ID and Subsystem ID from VF instead of
assuming they're the same as VF 0; they may differ (Logan Odell)
- Add ACS quirk for Pericom PI7C9X2G304 switches (Hans de Goede)
Peer-to-peer DMA:
- Add Zhaoxin KX-6000, KH-40000, KX-6000G, KX-7000, and KH-50000 host
bridges to allowlist (LeoLiu-oc)
- Add Alibaba T-HEAD Yitian 710 host bridge to allowlist (Feng Tang)
- Add Intel Haswell client host bridge to allowlist (Scott Lee)
- Intel Xeon E3/E5/E7 0x6f00 host bridge to allowlist (kai zhang)
- Fix handling of errors in pci_p2pdma_add_resource() to avoid (a)
unmapping a BAR if registering another fails and (b) use after free
of p2p_pgmap (Leon Romanovsky)
- Wait for RCU readers before freeing state to avoid use-after-free
of pdev->p2pdma (Leon Romanovsky)
- Restrict pci_p2pmem_find_many() to providers backed by a pool (Leon
Romanovsky)
- Safely terminate ACS redirect lists to avoid out-of-bounds access
to the buffer (Leon Romanovsky)
- Silence 'Host bridge not in P2PDMA whitelist' warnings unless
caller, e.g., pci_p2pmem_find_many(), requests 'verbose' (Leon
Romanovsky)
Sysfs:
- Return -ENODEV or -EIO sysfs 'label' or 'acpi_index' attributes
when Device Name _DSM fails, not -1, which is interpreted as -EPERM
(Krzysztof Wilczyński)
- Return valid sysfs 'acpi_index' attribute even if the Device Name
_DSM returned an invalid 'label' (Krzysztof Wilczyński)
- Expose sysfs 'acpi_index' and 'label' based on whether the Device
Name _DSM returns valid data, not merely whether the _DSM is
implemented (Krzysztof Wilczyński)
- Avoid out-of-bounds reads of the label returned by the Device Name
_DSM, which is in UTF-16 characters, not bytes (Krzysztof
Wilczyński)
- Reject unaligned resource I/O port accesses, which can oops on
arm64 (Deepanshu Kartikey)
Endpoint framework:
- Pass the correct physical and virtual endpoint function numbers
when setting translation of inbound memory windows (Koichiro Den)
- Make embedded doorbell IRQ non-shared, since currently only the
first EPF can allocate doorbells (Koichiro Den)
- MSI doorbells currently target the first EPF attached to an EPC;
let other EPFs try the embedded doorbell instead of failing when
they can't use the MSI doorbell (Koichiro Den)
- Serialize scan of vNTB virtual PCI bus with other PCI topology
changes (Koichiro Den)
- Manage vNTB lifetimes to avoid leaking virtual devices and buses
and allow removal (Koichiro Den)
- Track vNTB link state from both sides so both see the same
effective link state (Koichiro Den)
- Configure vNTB MSI-X when supported to avoid IOMMU faults and
failure to deliver doorbell interrupts on RC (Koichiro Den)
APM X-Gene PCIe controller driver:
- Use devm for clocks so they're automatically disabled, unprepared,
and released if errors happen during probe (Yuho Choi)
ASPEED PCIe controller driver:
- Fix clk and PHY leaks in aspeed_pcie_port_init() error paths (Liu
Zhenlong)
Broadcom iProc PCIe controller driver:
- Expose devm_pci_alloc_host_bridge_release() so drivers can share a
devm release function even if they don't need the device tree
parsing done by devm_pci_alloc_host_bridge() (Bjorn Helgaas)
- Request only the memory window from BCMA Enumeration ROM and warn
if it doesn't match the one in DT, which fixes an iproc-bcma probe
failure (Semih Baskan)
Broadcom STB PCIe controller driver:
- Replace bool properties for each SoC configuration with a u32
bitvector and a BFLAG() helper (Jim Quinlan)
- Use a similar BQUIRK() helper to test various SoC quirks (Jim
Quinlan)
Cadence PCIe controller driver:
- Remove device links to PHY, which are redundant because the PHY
core itself adds them (Vladimir Oltean)
- Return error (not success) from cdns_plat_pcie_probe() if
pm_runtime_get_sync() or cdns_pcie_ep_setup() failed (Vladimir
Oltean)
- Correct the driver data pointer usage; previously .probe() stored
'struct cdns_plat_pcie *', but .shutdown() used the pointer as
'struct cdns_pcie *', resulting in accessing garbage (Linmao Li)
ESWIN PCIe controller driver:
- Publish the platform driver MODULE_DEVICE_TABLE so the driver can
be autoloaded when built as a module (Pengpeng Hou)
Freescale i.MX6 PCIe controller driver:
- Fix resource and pwrctrl device leaks .probe() (Zhijian Han)
- Improve i.MX95 Gen3 link stability by changing MPLLB_BANDWIDTH from
default 120 to 140 (Richard Zhu)
- Use dev_err_probe() in host init error path to silence
-EPROBE_DEFER messages (Alexander Stein)
- Avoid dereferencing NULL clock names when 'clocks' includes more
phandles than 'clock-names' has names (Rudi Heitbaum)
- Add suspend_poweroff flag so platforms like i.MX that power off RC
controllers during suspend can enter L2 so endpoints can get
PME_Turn_Off notifications before power loss (Richard Zhu)
Freescale Layerscape PCIe controller driver:
- Enable PROBE_PREFER_ASYNCHRONOUS to reduce probe time of the four
controllers on LX2160A (Vincent Jardin)
Intel VMD host bridge driver:
- Flush DMA writes before handling MSI on Meteor Lake: MSI may arrive
before write has completed, resulting in an nvme 30 second stall
before a QID timeout and possibly other similar problems (Rickey
Bartlett)
- Flush DMA writes before handling MSI on Arrow Lake (Vladimir
Nedoshivin)
Marvell Aardvark PCIe controller driver:
- Disable PHY on probe failures (Myeonghun Pak)
Marvell MVEBU PCIe controller driver:
- Refcount child OF nodes during .probe() to make a concurrent OF
overlay removal safe (Krzysztof Kozlowski)
MediaTek PCIe controller driver:
- Find INTx DT property by 'interrupt-controller' name instead of
assuming it's the first child node (Zhengping Zhang)
MediaTek PCIe Gen3 controller driver:
- Fix a 64-bit type truncation in mtk_pcie_set_trans_table() to avoid
issues with windows above or larger than 4GB (Sreeraj S Kurup)
NVIDIA Tegra264 PCIe controller driver:
- Fix the Link Capabilities offset so we read the correct register
(Bjorn Helgaas)
Qualcomm PCIe controller driver:
- Only collect reset GPIOs from PCI bridge DT nodes to avoid stealing
resets used by downstream devices like USB controllers (Christopher
Obbard)
- Block accesses to downstream devices on link down to reduce a storm
of Completion Timeout AER interrupts (Qiang Yu)
- Skip system suspend/resume for firmware-managed PCIe, where
firmware manages clocks, regulators, resets, etc (Mrinmay Sarkar)
- Honor IOMMU provider's #iommu-cells in qcom_pcie_config_sid_1_9_0()
(Manivannan Sadhasivam)
- Deinitialize endpoint on remove (Guangshuo Li)
- Treat Root Port error recovery as successful even if link doesn't
come up after reset because the device was hot-unplugged (Konrad
Dybcio)
- Skip unnecessary iMSI-RX initialization if DT 'msi-map' is present,
indicating an external MSI controller (Ayiluri Naga Rashmi)
Renesas R-Car PCIe controller driver:
- Limit Max_Read_Request_Size to 256 to avoid hardware erratum (Marek
Vasut)
- Support PERST# via reset subsystem as well as the existing GPIO
support to prepare for R-Car Gen5 SoCs (Marek Vasut)
- Add DT and driver support for the R-Car Gen 5 X5H (R8A78000) PCIe
Gen 4 core (Marek Vasut)
- Add Application/Local register reset DT description and driver
support for both host and endpoint mode (Marek Vasut)
- Add PM ops so controller works after suspend/resume (Marek Vasut)
Renesas RZ/G3S PCIe controller driver:
- Disable refclk on probe failure (Lad Prabhakar)
- Propagate platform_get_irq_byname() errors so probe deferral works
correctly (Lad Prabhakar)
- Tear down INTx handlers if subsequent initialization fails (Lad
Prabhakar)
- Add RZ/G3L (R9A08G046) DT and driver support (Biju Das)
Rockchip PCIe controller driver:
- Limit host and endpoint controllers to 2.5 GT/s since 5.0 GT/s is
unsafe per Rockchip (Geraldo Nascimento)
Synopsys DesignWare PCIe controller driver:
- Set DMA_BYPASS bit in outbound IATU CTRL2 register to avoid data
corruption if the iATU translates DMA engine transactions (Sumit
Kumar)
- Use FIELD_PREP() to remove need for *_SHIFT definitions (Hans
Zhang)
TI DRA7xx PCIe controller driver:
- Remove device links to PHY, which are redundant because the PHY
core itself adds them (Vladimir Oltean)
- Fix optional clock leak when .probe() fails by using
devm_clk_get_optional_enabled() (Felix Gu)
TI Keystone PCIe controller driver:
- Remove device links to PHY, which are redundant because the PHY
core itself adds them (Vladimir Oltean)
UltraRISC PCIe controller driver:
- Allow DWC drivers to skip outbound iATU setup if they don't need
translation between CPU and PCI addresses (Xincheng Zhang)
- Skip MEM outbound iATU setup on DP1000 (Xincheng Zhang)
Xilinx Versal CPM PCIe controller driver:
- Add DT and driver support for optional PERST# for use in warm reset
scenarios (Sai Krishna Musham)
Xilinx XDMA PCIe controller driver:
- Fix device node reference leak in xilinx_pl_dma_pcie_init_irq_domain()
(Wentao Liang)"
* tag 'pci-v7.4-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (139 commits)
PCI/pwrctrl: Power off child devices on power-on failure
PCI/pwrctrl: Only destroy devices created by pwrctrl core
PCI/pwrctrl: generic: Fix leaking array from of_regulator_bulk_get_all()
PCI/pwrctrl: tc9563: Switch per-port reset to GPIO descriptor API
PCI/pwrctrl: tc9563: Add GPIO auxiliary device support
dt-bindings: PCI: toshiba,tc9563: Document embedded GPIO controller
gpio: tc9563: Add support for the embedded GPIO controller
PCI: qcom: Skip DWC MSI host initialization when DT 'msi-map' is present
PCI: qcom: Ignore -ENODEV after Root Port reset
PCI: qcom-ep: Deinitialize endpoint on remove
PCI/sysfs: Reject unaligned resource I/O port accesses
PCI: rcar-gen4: Add missing PM ops
PCI: endpoint: pci-epf-vntb: Honor MSI-X selection
PCI: endpoint: pci-epf-vntb: Use a local epf pointer in interrupt setup
PCI: dwc: imx6: Use regmap_assign_bits() for conditional set/clear
PCI: dwc: Describe DWC PCIe fields with full masks and FIELD_PREP()
PCI: dwc: Rename pp->irq_domain to pp->msi_irq_domain
PCI: dwc: Rename dw_pcie_allocate_domains() to dw_pcie_allocate_msi_domains()
PCI: dwc: Correct PCIE_DW_PLAT_EP reference in Kconfig help
PCI/ASPM: Disable ASPM when driver requests it
...
|
|
If creating the file for a table fails, acpi_tables_sysfs_init()
returns without sending the uevents for the tables directories, and
acpi_sysfs_init() returns before creating the hotplug and pm_profile
files.
Stop creating table files at that point, but finish the rest of the
initialization. Skipping only the failed table would give its file
name to the next table with the same signature, so reading that file
would return the failed table.
Signed-off-by: Jamie Nguyen <jamien@nvidia.com>
Link: https://patch.msgid.link/20261013193900.1258808-1-jamien@nvidia.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
acpi_data_show() maps the whole data region on every read(), although
it copies at most count bytes and sysfs passes at most PAGE_SIZE bytes
per call. acpi_os_unmap_iomem() defers the iounmap until after an RCU
grace period, so a process reading one of these files in a loop keeps
many full-size mappings in flight.
Map only the range being read. acpi_os_map_iomem() rounds the mapping
to page boundaries, so each mapping is now at most two pages, whatever
the size of the region.
A malformed table can describe a region that wraps around the end of
the physical address space. acpi_os_map_iomem() doesn't check for that,
and its lookup of existing mappings then matches an unrelated mapping,
with or without this change. Fail reads of such a region before mapping
anything.
Signed-off-by: Jamie Nguyen <jamien@nvidia.com>
Link: https://patch.msgid.link/20261013180728.957618-1-jamien@nvidia.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
In AcpiInstallMethod(), the local ParserState is stack-allocated and
only ParserState.Aml was initialized. Parser helpers called by this path
read ParserState.AmlEnd for bounds checking: AcpiPsPeekOpcode() reads it
before validating the first AML opcode, and AcpiPsGetNextPackageEnd()
reads it indirectly via AcpiPsGetNextPackageLength(). The subsequent
package-limit check also compares against ParserState.AmlEnd. Because
AmlEnd was never set, these checks operated on an uninitialized value,
which Coverity flagged as an uninitialized read (CID 1684785) and which
could lead to incorrect parser bounds decisions.
Coverity report:
*** CID 1684785: Memory - illegal accesses (UNINIT)
/src/acpica/source/components/namespace/nsxfname.c: 712 in AcpiInstallMethod()
ParserState.Aml += AcpiPsGetOpcodeSize (Opcode);
>>> CID 1684785: Memory - illegal accesses (UNINIT)
>>> Using uninitialized value "ParserState.AmlEnd" when calling
"AcpiPsGetNextPackageEnd".
ParserState.PkgEnd = AcpiPsGetNextPackageEnd (&ParserState);
Initialize ParserState.AmlEnd to the end of the table
(Buffer + Table->Length) so the parser bounds checks operate on a valid
limit.
Link: https://github.com/open-acpica/acpica/commit/19429ef91ebfb2144c918038dce13e297b4ef051
Fixes: bdc357540129 ("ACPICA: add boundary checks in two places")
Signed-off-by: Ivan Hu <ivan.hu@canonical.com>
Signed-off-by: Maciej Wieczor-Retman <maciej.wieczor-retman@intel.com>
Signed-off-by: Leonard Lausen <leonard@lausen.nl>
[ rjw: Subject tweaks ]
Link: https://patch.msgid.link/20261019145421.47181-2-leonard@lausen.nl
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Registration and removal currently hold profile_lock across
device_unregister() and sysfs_update_group(). These operations can remove
sysfs attributes and wait for their active callbacks to finish. The
profile read and write callbacks acquire profile_lock themselves, so a
concurrent access can deadlock:
Removal/update path Active sysfs callback
------------------- ---------------------
acquire profile_lock hold kernfs active reference
remove a sysfs attribute wait for profile_lock
wait for its active references
The removal path cannot finish until the callback returns, and the
callback cannot return until the removal path releases profile_lock.
This applies both to per-provider device teardown and to updates of the
legacy aggregate attribute group.
Commit 041142d7d252 ("ACPI: platform-profile: Fix possible deadlock in
platform_profile_remove()") previously fixed this lock ordering by moving
sysfs_remove_group() outside profile_lock. Commit 55b1e68134bf ("ACPI:
platform_profile: Use guard(mutex) for register/unregister") reintroduced
the issue by extending the mutex guard over sysfs_remove_group(). Later,
commit 77be5cacb2c2 ("ACPI: platform_profile: Create class for ACPI
platform profile") replaced that teardown with device_unregister() and
sysfs_update_group(), still under the same mutex, extending the problem
to class-device teardown and aggregate attribute updates.
Simply dropping profile_lock around these operations is insufficient.
Aggregate operations currently discover providers through the class
device list. A provider being unregistered could therefore still be
selected for an aggregate read, write or cycle while its sysfs files are
being torn down. Concurrent registrations and removals would also race
when updating aggregate attribute visibility.
Introduce profile_registration_lock to serialize registration, removal
and aggregate sysfs updates. Sysfs callbacks never acquire this mutex.
Retain profile_lock for profile operations and use it to protect an
explicit list of handlers participating in the aggregate interface.
Add a handler to that list only after device_register() succeeds. On
removal, unlink it under profile_lock before calling device_unregister().
Acquiring profile_lock first waits for any aggregate operation already
using the handler to complete; unlinking prevents later aggregate
operations from finding it. Release profile_lock before draining sysfs
callbacks, allowing active per-provider callbacks to complete before the
device is released. Apply the same unlink-before-unregister ordering to
registration error cleanup.
Walk this list for aggregate reads, writes and profile cycling, and use
its emptiness to determine aggregate attribute visibility. The class
devices remain the per-provider userspace interface.
There can now be an interval between removing the last handler from the
list and removing the aggregate attributes. Explicitly reject choices
reads and writes during that interval: the intersection bitmap starts
with every bit set, so an empty traversal must not advertise all profiles
or report a successful write without updating a provider.
This separates aggregate membership from class device teardown while
preserving the existing class and ACPI sysfs interfaces.
Fixes: 55b1e68134bf ("ACPI: platform_profile: Use guard(mutex) for register/unregister")
Fixes: 77be5cacb2c2 ("ACPI: platform_profile: Create class for ACPI platform profile")
Signed-off-by: Daniel Lezcano <daniel.lezcano@oss.qualcomm.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
[ rjw: Subject adjustment, added two empty code lines ]
[ rjw: Renamed profile_walk_handlers() to profile_for_each_handler() ]
Link: https://patch.msgid.link/20261020144525.3265851-1-daniel.lezcano@oss.qualcomm.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
On ThinkPad P1 Gen2 and P53, INT3403 _TMP switches the EC page selector
without taking the AML mutex the battery methods use, so _BIX and _BST
running at the same time can read the wrong page. Since commit d33e89d12295
("thermal: core: Suspend thermal zones later and resume them earlier")
this happens on most resumes.
Evaluate the battery methods with acpi_evaluate_object_exclusive().
Fixes: d33e89d12295 ("thermal: core: Suspend thermal zones later and resume them earlier")
Reported-by: Charis Stratakis <c.stratakis@proton.me>
Closes: https://lore.kernel.org/all/37N_jFulf7n-Z55NfKfE71C_wVPxYvZ0xD_iRUg2fXu7TypDiF5PStQ6siSfVBih6fThg5WoPes8U5ZQpfVm_teMFcUGXFxz2DdMbfSWuws=@proton.me/
Cc: All applicable <stable@vger.kernel.org> # 80892972ff23 ACPI: utils: Add exclusive AML evaluation helpers
Signed-off-by: Ali Ahmet Memiş <aliamemis@disroot.org>
Reviewed-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Reviewed-by: Rong Zhang <i@rong.moe>
Link: https://patch.msgid.link/20261018122220.678822-3-aliamemis@disroot.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
ACPICA drops the interpreter lock while AML waits, for example around EC
accesses, so two methods can run interleaved.
Some firmware relies on methods not interleaving, for instance by
switching an EC page selector without taking the AML mutex that the
other users of that page hold.
Add acpi_evaluate_object_exclusive(), acpi_evaluate_integer_exclusive()
and acpi_execute_simple_method_exclusive() which serialize the
evaluation under a global mutex, for callers that are known to be
affected.
Suggested-by: Rafael J. Wysocki <rafael@kernel.org>
Link: https://lore.kernel.org/all/CAJZ5v0gS4agVUkCO6M=VW4Wi2y1-s+k23bpzmX9aAZ0Rsv4z9Q@mail.gmail.com/
Signed-off-by: Ali Ahmet Memiş <aliamemis@disroot.org>
Reviewed-by: Rong Zhang <i@rong.moe>
Link: https://patch.msgid.link/20261018122220.678822-2-aliamemis@disroot.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"This time, the most visible part are the ACPI CPPC updates from
Christian Loehle, including CPPC cpufreq driver changes, even though
updates of cpufreq drivers proper are still the largest topic group.
However, the updates of cpufreq drivers depend on the ACPI CPPC
updates, so they should really be counted together and that is well
over 1/2 of the total commit count.
Interestingly enough, almost all of the updates included here are
fixes or cleanups, with some new feature support in the amd-pstate
cpufreq driver and IPQ9650 support in the qcom-nvmem cpufreq driver.
The runtime PM documentation improvements from Brian Norris can also
be mostly regarded as fixes, but a new kunit test goes along with
them.
Specifics:
- Fix multiple issues related to input validation, synchronization,
access safety, memory layout and register field validation, and
error handling in the ACPI CPPC library (Christian Loehle and Sumit
Gupta)
- Select the frequency-invariance callback per CPU in the CPPC
cpufreq driver and create the FIE worker before enabling PCC
callbacks in it to avoid queueing work through a missing worker and
dereferencing a NULL pointer (Christian Loehle)
- Update the CPPC cpufreq driver entry in MAINTAINERS and add a new
entry for the ACPI CPPC library (Christian Loehle)
- Minor fixes in various cpufreq drivers (Alexander Koskovich, Daniel
Schwierzeck, Frank Zhang, Haotian Zhang, Kathiravan Thirumoorthy,
Sumeet Pawnikar, and Xueqin Luo)
- Fix wrong behaviors on multi-node servers in the Loongson cpufreq
driver (Huacai Chen)
- Reject NULL from cpufreq_cpu_get() in the Rust code (Mehmet
Koseoglu)
- Add suspend OPP to mediatek cpufreq driver and DT (Ryan Brue)
- Fixups for a few bugs identified by Sashiko in the amd-pstate
cpufreq driver (Mario Limoncielloi, Wentao Guan)
- Initial support for maximum frequency capacity handling on Zen6
client in amd-pstate (Mario Limonciello)
- Fix for amd-pstate-ut with 'Requested CPU Min frequency' BIOS
option (K Prateek Nayak)
- New Zen6 tuning values for EPP in amd-pstate (Mario Limonciello,
Vishal Badole)
- amd-pstate documentation fix (Karl Mehltretter)
- Restrict deferred downscaling to low load for shared policies in
the conservative cpufreq governor to avoid undesirable CPU
frequency reduction in some cases (Shengming Hu)
- Serialize sugov_start() against rate limit updates in the schedutil
cpufreq governor to avoid using a stale rate limit value (Hui Su)
- Prevent cpuidle governors menu and teo from returning idle state 0
after it has been disabled (Xueqin Luo)
- Replace min_t() with the better alternatives in the intel_idle
driver and make it use 2-argument strscpy() (Andy Shevchenko)
- Fix two repeated phrase instances in cpuidle (Hemanth Selam,
Syazwina Fazrul)
- Add rugged Panther Lake support to the intel_rapl power capping
driver and make it use %pe for printing error pointers (Srinivas
Pandruvada and Sumeet Pawnikar)
- Update and improve runtime PM documentation and add a kunit test
for supplier idle/suspend (Brian Norris)
- Add a pm_runtime_dont_use_autosuspend() call to pm_runtime_reinit()
to ensure autosuspend disabling on driver teardown (Joshua Crofts)
- Ignore page-zero RAM in E820 checksum during hibernation on x86 to
avoid rejecting images created after kexec() (Matthias Goergens)
- Add resume event mapping for PMSG_POWEROFF to the PM core to allow
it to carry out device shutdown in the future (Mario Limonciello)
- Add DPM watchdog to prepare/late/early/noirq/complete phases of
device suspend and resume (Mayank Rungta)
- Update swsusp.txt references to swsusp.rst in hibernation
documentation (Li Jun)
- Fix use-after-free of perf domain in netlink doit handlers for
energy models (Fan Wu)
- Add synchronize_rcu() back to cpu_pm_unregister_notifier() after it
was removed inadvertently in previous development cycles to avoid
use-after-free (Bradley Morgan)
- Unregister CPU PM notifier outside the timer lock in the
timer-ti-dm clocksource driver (Bradley Morgan)
- Fix typo "sucessfully" in a comment in pm_clk_add_clk() kerneldoc
comment and typo "hierachy" in a comment in pm-graph (Hemanth
Selam)
- Fix the return value in dev_pm_opp_get_of_node() kernel-doc (Karl
Mehltretter)"
* tag 'pm-7.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (89 commits)
cpufreq: loongson3: Replace IOCSR read/write with MMIO ones
cpufreq: loongson3: Use global physical CPU ID in get/target callbacks
cpufreq: loongson3: Replace per-package mutex with per-node
cpufreq: loongson3: Adjust the width of id and val in smc_message
cpufreq: loongson3: Make this driver depend on MACH_LOONGSON64
PM: runtime: Expand introduction with core concepts and structure
cpufreq: schedutil: Serialize sugov_start() against rate limit updates
MAINTAINERS: ACPI: Add a separate CPPC entry
MAINTAINERS: cpufreq: Replace CPPC reviewer
arm64: dts: mediatek: mt8173: Mark the lowest CPU OPPs for suspend
cpufreq: mediatek: Enter system sleep at the suspend OPP
cpufreq: qcom-cpufreq-hw: fix device node refcount leak in phandle parsing
cpufreq: qcom-nvmem: Add IPQ9650 support
cpufreq: Add Milos to cpufreq-dt-platdev blocklist
cpufreq: Use %pe to print error pointers symbolically
rust: rcpufreq_dt: add module alias
cpufreq: sti: avoid NULL dereference in dev_err()
cpufreq: tegra194: fix double-pointer error in get_cpu_ndiv
cpufreq: sparc-us2e: fix frequency table index copy-paste error
rust: cpufreq: reject NULL from cpufreq_cpu_get()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI support updates from Rafael Wysocki:
"The most significant change here is the rework of the core ACPI device
enumeration code to avoid initializing ACPI power management
prematurely for devices with unmet dependencies. This essentially is a
problem fix, but it requires taking PCI device enumeration ordering
into account among other things, so it is far from straightforward.
There was an attempt to do this in the 7.3 time frame that had to be
reverted, so this time it is done much more carefully.
There is also an ACPI thermal control update rearranging the code to
register thermal class cooling devices under specific parents, which
is visible in sysfs. This helps to figure out what is represented by
those devices much more easily, but it also allows the binding of
cooling devices to trip points in thermal zones to be adjusted so it
need not rely on specific cooling device data usage in thermal
drivers.
From the number of commits perspective, the most visible part is the
one replacing acpi_get_first_physical_node() with
acpi_bus_get_primary_device() everywhere and dropping the former that
was inherently racy and generally unsafe to use. Fortunately, the
maintainers involved responded timely and all of that could be done
within one development cycle.
Another quite visible part is Dave Jiang's series fixing multiple
issues reported by Sashiko in the ACPI APEI support code with a PCI
AER improvement on top. It took several iterations of this to make
Sashiko happy and the code in question should be much more robust
going forward.
One other thing worth mentioning separately is that the ACPI bus type
is now going to be registered as a "companion" one and it will not be
possible to register a driver binding directly to a struct
acpi_device. All of the existing users of those drivers in the tree
were converted to platform drivers in the previous cycles, so this is
just a final step in a longer journey.
Apart from the above, there are many fixes, mostly in drivers, with a
noticeable exception of a fix in the code binding devices to their
ACPI companions, new IOVT IOMMU support in ACPICA, new _Ixx object
support for suspend-to-idle on x86, multiple new quirks, mostly
related to unused ACPI power resources and backlight handling, and
assorted cleanups.
Specifics:
- Make the core ACPI device enumeration code stop attempting to
initialize ACPI power management for devices before they are known
to be present and functional (Rafael Wysocki)
- Simplify and clean up the core ACPI device enumeration code on top
of the previous adjustment and reduce debug noise coming from it
(Rafael Wysocki)
- Fix locking in the code binding devices to their ACPI companions,
prevent it from replacing a valid ACPI companion pointer with NULL
incidentally, improve its messaging (including debug noise
reduction), and reduce its overhead by making it skip the cases in
which no ACPI companion may exist early (Rafael Wysocki)
- Reduce runtime memory footprint of struct acpi_device by
rearranging fields in it (Andy Shevchenko)
- Update the driver core to allow bus types without drivers to be
registered as "companion bus types" without driver-related sysfs
attributes and register the ACPI bus type as a companion one
(Rafael Wysocki)
- Use strscpy() instead of strcpy() in the ACPI sysfs interface
(Ruslan Vagner)
- Remove __meminitdata from hmat_adist_nb declaration preserving it
even when CONFIG_MEMORY_HOTPLUG is not set to prevent notifier
chain corruption in some cases (Alejandro Lucero)
- Prevent a NULL pointer dereference when attempting to read the
table length after a mapping bookkeeping failure during an initrd
override invocation with permanent table mappings enabled (Slavin
Liu)
- Use for_each_populated_zone() in get_node_num() in the MRRM table
pareser (Sang-Heon Jeon)
- Use vsnprintf() in acpi_os_vprintf() to prevent memory corruption
resulting from overly long diagnostic messages that may not fit
into a static buffer used by ACPICA and may be produced by a
malformed ACPI table (Vlatko Kosturjak)
- Ignore leading root scope prefix in string _UID match to allow AMD
IOMMU matching to work as expected in some cases (Mario
Limonciello)
- Adjust message printing macros for ACPI objects to use dev_fmt()
for more consistency with the analogous dev_*() macros (Rafael
Wysocki)
- Add _Ixx GPE wake indicator support to the x86 suspend-to-idle
handling code (Saranya Gopal)
- Clear driver_data before free in the ACPI PCI Link driver to
prevent a dangling pointer from being used later (Jiale Yao)
- Accumulate the queued flag across error sections of a CPER record
in ghes_do_proc() to prevent it from being cleared by a later
section or entry that does not queue memory-failure work (Breno
Leitao)
- Map a raw PCI AER Capability image field by field to prevent
information loss from occurring while processing it (Dave Jiang)
- Update a stale driver source reference in the ACPI APEI EINJ driver
documentation (Prabhakar Pujeri)
- Reject CPER records with an out-of-range error_data_length or an
error status block length wrapping a u32 in the EFI CPER driver
(Dave Jiang)
- Address multiple assorted issues in the ACPI extlog driver (Dave
Jiang)
- Address two issues related to CXL in the ACPI APEI GHES driver
(Dave Jiang)
- Read only validated fields in cper_mem_err_pack() (Dave Jiang)
- Validate memory error section length before payload access, prevent
writes past array bounds from occurring and sanitize software
metadata in the ACPI APEI GHES driver (Dave Jiang)
- Make cxl_cper_handle_prot_err() static (Dave Jiang)
- Add IOVT IOMMU support to ACPICA (Bibo Mao)
- Fix PCC OperationRegion command offsets in ACPICA (Sudeep Holla)
- Fix memory leak in acpi_ds_create_field() related to the handling
of internal_pcc_buffer allocations (Breno Leitao)
- Fix memory leak due to leftover devm_kcalloc() argument in the ACPI
fan driver (Rafael Wysocki)
- Fix backlight unregistration ordering in the ACPI video bus device
driver (Rafael Wysocki)
- Update the thermal core to allow the registration of thermal class
cooling devices under specific parents and convert the ACPI fan,
ACPI processor, and ACPI video bus device drivers to do so (Rafael
Wysocki)
- Adjust the ACPI thermal zone driver to use thermal class cooling
device parent information for binding cooling devices to trip
points in thermal zones (Rafael Wysocki)
- Use cooling device data that is a better match for a given driver
instead of a struct acpi_device pointer that had to be used for
this purpose previously in the ACPI fan and processor drivers
(Rafael Wysocki)
- Fix acpi_thermal_guess_offset() in the ACPI thermal zone driver for
thermal zone devices with a 273.0°K offset (Hans de Goede)
- Define a free for ACPI objects allocated by ACPICA helpers and use
it to simplify AML error handling in the ACPI fan driver (Rafael
Wysocki)
- Switch over the users of acpi_get_first_physical_node(), that was
inherently racy and therefore not really safe to use, to use its
replacement acpi_bus_get_primary_device(), and eliminate the former
(Rafael Wysocki)
- Add !CONFIG_ACPI stubs for acpi_find_child_device() and
acpi_device_uid() (Mario Limonciello and Robin Murphy)
- Fix bogus cycle count values on systems without _BIX in the ACPI
battery driver (Armin Wolf)
- Fix NULL pointer dereference on allocation failure and report
relative state of charge as CAPACITY in the ACPI SBS driver (Itay
Shem-tov and Guangshuo Li)
- Add lid_init_state quirk for Razer Blade Stealth 13 (Early 2020)
RZ09-0310 to the ACPI button driver (Ian Gallagher)
- Add new quirks to force the native backlight on Dell OptiPlex AIO
7410 35W and Acer Nitro AN515-58 in the ACPI video bus device
driver (Chitransh Mandhaniya and Dirga Yuza)
- Fix the shared memory signature handling in the ACPI PCC address
space handler, free the PCC mailbox channel on operation region
deactivation, and avoid unnecessary repeated computations of the
PCC operation region command timeout (Sudeep Holla)
- Fix a log message typo in the ACPI NUMA support code (Hemanth
Selam)
- Zero-initialize capability query result in the ACPI Platform
Firmware Runtime Update and Telemetry driver to avoid disclosure of
kernel stack data to user space (Karl Mehltretter)
- Replace the remaining built-in/module check for CONFIG_ACPI_WMI in
a header file with IS_ENABLED() macro (Lalit Shankar Chowdhury)
- Retry probing battery docks after hotplug in the ACPI docking
station driver to avoid missing ACPI add notifications (Vibhor
Goel)
- Detach device after resource transition failure in
pnp_device_probe() to avoid blocking later manual PNP configuration
attempts (Myeonghun Pak)"
* tag 'acpi-7.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (90 commits)
ACPI: PM: Add Acer Aspire A515-53G to dmi_leave_unused_power_resources_on[]
ACPI: video: force native backlight on Dell OptiPlex AIO 7410 35W
ACPI: PM: sleep: Drop unused sleep_no_lps0 define
ACPI: PM: Add unused power resource quirk for Casper Excalibur G900
ACPI: dock: Retry probing battery docks after hotplug
ACPI: PCI: pci_link: clear driver_data before free
ACPI: APEI: accumulate the queued flag across error sections
ACPICA: actbl2.h: Add bit constants of the Flags field in the IOVT IOMMU structure
ACPI: bus: Drop acpi_get_first_physical_node()
efi/dev-path-parser: Switch to use acpi_bus_get_primary_device()
ALSA: hda: tas2781: Switch to use acpi_bus_get_primary_device()
ALSA: hda: cs35l41: Switch to use acpi_bus_get_primary_device()
iommu/arm-smmu-v3: Switch to use acpi_bus_get_primary_device()
PCI/AER: Map a raw AER Capability image field by field
ACPI: NUMA: fix typo in log message
ACPI: Add stub for acpi_find_child_device()
driver core/ACPI: Introduce companion_bus_register()
ACPI: PCC: Cache OpRegion command timeout
ACPI: PCC: Free channel on OpRegion deactivation
ACPI: PCC: Preserve shared memory signature in OpRegion handler
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/leitao/linux
Pull configfs updates from Breno Leitao:
- Attribute structures can now be const (Thomas Weißschuh)
- The first selftests for the configfs userspace interface, plus a
sample subsystem that accepts symlinks to test against. They include
a race of symlink(2) against rmdir of the target, which exercises the
use-after-free fixed in v7.3-rc3.
- Rust bindings, merged from Andreas Hindborg's signed tag: fix the
data offset calculation in subsystem callbacks (marked for stable),
add the missing Send and Sync bounds, and correct a safety comment.
* tag 'configfs-7.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/leitao/linux:
samples: configfs: constify the configfs_attribute structures
configfs: Allow the registration of const struct configfs_attribute
configfs: Constify configfs_bin_attribute
configfs: Treat attribute structures as const internally
configfs: Constify is_visible/is_visible_bin in configfs_group_operations
rust: configfs: remove mutability from some field initializers
selftests/configfs: race symlink against rmdir of the target
selftests/configfs: cover symlink and unlink
samples/configfs: add a subsystem that accepts symlinks
selftests/configfs: add tests for the userspace interface
rust: configfs: fix data offset calculation for subsystem callbacks
rust: configfs: require thread-safe callback data
rust: configfs: fix release safety documentation
|
|
Merge updates of the ACPI PCC (Platform Communications Channel) driver,
ACPI NUMA support code, ACPI Platform Firmware Runtime Update and
Telemetry driver, ACPI WMI support code, and a PNP update for 7.4:
- Fix the shared memory signature handling in the ACPI PCC address
space handler, free the PCC mailbox channel on operation region
deactivation, and avoid unnecessary repeated computations of the
PCC operation region command timeout (Sudeep Holla)
- Fix a log message typo in the ACPI NUMA support code (Hemanth Selam)
- Zero-initialize capability query result in the ACPI Platform Firmware
Runtime Update and Telemetry driver to avoid disclosure of kernel
stack data to user space (Karl Mehltretter)
- Replace the remaining built-in/module check for CONFIG_ACPI_WMI in a
header file with IS_ENABLED() macro (Lalit Shankar Chowdhury)
- Detach device after resource transition failure in pnp_device_probe()
to avoid blocking later manual PNP configuration attempts (Myeonghun
Pak)
* acpi-pcc:
ACPI: PCC: Cache OpRegion command timeout
ACPI: PCC: Free channel on OpRegion deactivation
ACPI: PCC: Preserve shared memory signature in OpRegion handler
* acpi-numa:
ACPI: NUMA: fix typo in log message
* acpi-pfrut:
ACPI: pfr_update: zero-initialize capability query result
* acpi-misc:
ACPI: WMI: use IS_ENABLED() to simplify built-in or module check
* pnp:
PNP: Detach device after resource transition failure
|
|
Merge updates of the ACPI battery, ACPI SBS (Smart Battery System), ACPI
button, and ACPI video bus device drivers for 7.4:
- Fix bogus cycle count values on systems without _BIX in the ACPI
battery driver (Armin Wolf)
- Fix NULL pointer dereference on allocation failure and report
relative state of charge as CAPACITY in the ACPI SBS driver (Itay
Shem-tov and Guangshuo Li)
- Add lid_init_state quirk for Razer Blade Stealth 13 (Early 2020)
RZ09-0310 to the ACPI button driver (Ian Gallagher)
- Add new quirks to force the native backlight on Dell OptiPlex AIO
7410 35W and Acer Nitro AN515-58 in the ACPI video bus device
driver (Chitransh Mandhaniya and Dirga Yuza)
* acpi-battery:
ACPI: battery: Fix bogus cycle count values on systems without _BIX
* acpi-sbs:
ACPI: SBS: Fix NULL pointer dereference on allocation failure
ACPI: SBS: report relative state of charge as CAPACITY
* acpi-button:
ACPI: button: Add lid_init_state quirk for Razer Blade Stealth 13 (Early 2020) RZ09-0310
* acpi-video:
ACPI: video: force native backlight on Dell OptiPlex AIO 7410 35W
ACPI: video: add backlight=native DMI quirk on Acer Nitro AN515-58
|
|
Merge changes related to ACPI support in device drivers for 7.4:
- Switch over the users of acpi_get_first_physical_node(), that
was inherently racy and therefore not really safe to use, to use
its replacement acpi_bus_get_primary_device(), and eliminate the
former (Rafael Wysocki)
- Add !CONFIG_ACPI stubs for acpi_find_child_device() and
acpi_device_uid() (Mario Limonciello and Robin Murphy)
* acpi-driver:
ACPI: bus: Drop acpi_get_first_physical_node()
efi/dev-path-parser: Switch to use acpi_bus_get_primary_device()
ALSA: hda: tas2781: Switch to use acpi_bus_get_primary_device()
ALSA: hda: cs35l41: Switch to use acpi_bus_get_primary_device()
iommu/arm-smmu-v3: Switch to use acpi_bus_get_primary_device()
ACPI: Add stub for acpi_find_child_device()
ACPI: bus: Provide !ACPI stub for acpi_device_uid()
ALSA: hda: aw88399: Switch to use acpi_bus_get_primary_device()
ASoC: loongson: Switch to use acpi_bus_get_primary_device()
ASoC: intel: boards: Switch to use acpi_bus_get_primary_device()
ASoC: amd: acp3x-es83xx: Switch to use acpi_bus_get_primary_device()
ASoC: amd: acp-es8336: Switch to use acpi_bus_get_primary_device()
thunderbolt: Switch to use acpi_bus_get_primary_device()
platform/x86: apple-gmux: Switch to use acpi_bus_get_primary_device()
platform/x86: x86-android-tablets: Use acpi_bus_get_primary_device()
platform/x86: serdev_helpers: Switch to use acpi_bus_get_primary_device()
platform/x86: yogabook: Switch to use acpi_bus_get_primary_device()
ACPI: amba: Switch to use acpi_bus_get_primary_device()
ACPI: bus: Use acpi/acpi_bus.h without CONFIG_ACPI
|
|
Merge ACPICA updates and ACPI thermal control updates for 7.4:
- Add IOVT IOMMU support to ACPICA (Bibo Mao)
- Fix PCC OperationRegion command offsets in ACPICA (Sudeep Holla)
- Fix memory leak in acpi_ds_create_field() related to the handling of
internal_pcc_buffer allocations (Breno Leitao)
- Fix memory leak due to leftover devm_kcalloc() argument in the ACPI
fan driver (Rafael Wysocki)
- Fix backlight unregistration ordering in the ACPI video bus device
driver (Rafael Wysocki)
- Update the thermal core to allow the registration of thermal class
cooling devices under specific parents and convert the ACPI fan,
ACPI processor, and ACPI video bus device drivers to do so (Rafael
Wysocki)
- Adjust the ACPI thermal zone driver to use thermal class cooling
device parent information for binding cooling devices to trip points
in thermal zones (Rafael Wysocki)
- Use cooling device data that is a better match for a given driver
instread of a struct acpi_device pointer that had to be used for
this purpose previously in the ACPI fan and processor drivers (Rafael
Wysocki)
- Fix acpi_thermal_guess_offset() in the ACPI thermal zone driver for
thermal zone devices with a 273.0°K offset (Hans de Goede)
- Define a free for ACPI objects allocated by ACPICA helpers and use
it to simplify AML error handling in the ACPI fan driver (Rafael
Wysocki)
* acpica:
ACPICA: actbl2.h: Add bit constants of the Flags field in the IOVT IOMMU structure
ACPICA: Fix PCC OperationRegion command offsets
ACPICA: Fix memory leak in acpi_ds_create_field()
* acpi-thermal:
ACPI: fan: Use __free() to simplify AML error handling
ACPI: thermal: Fix acpi_thermal_guess_offset() for device with a 273.0°K offset
ACPI: fan: Use more suitable cooling device data
ACPI: fan: Store ACPI device pointer in struct acpi_fan
ACPI: processor: thermal: Use more suitable cooling device data
ACPI: thermal: Use cooling device parent for thermal zone binding
ACPI: fan: Use thermal_cooling_device_create()
ACPI: video: Use thermal_cooling_device_create()
ACPI: processor: thermal: Use thermal_cooling_device_create()
thermal: core: Introduce thermal_cooling_device_create()
ACPI: video: Fix backlight unregistration ordering
ACPI: fan: Fix memory leak due to leftover devm_kcalloc() argument
|
|
|
|
Merge an ACPI support change related to PCI and ACPI APEI support
updates for 7.4:
- Clear driver_data before free in the ACPI PCI Link driver to prevent
a dangling pointer from being used later (Jiale Yao)
- Accumulate the queued flag across error sections of a CPER record in
ghes_do_proc() to prevent it from being cleared by a later section or
entry that does not queue memory-failure work (Breno Leitao)
- Map a raw PCI AER Capability image field by field to prevent
information loss from occurring while processing it (Dave Jiang)
- Update a stale driver source reference in the ACPI APEI EINJ driver
documentation (Prabhakar Pujeri)
- Reject CPER records with an out-of-range error_data_length or an
error status block length wrapping a u32 in the EFI CPER driver (Dave
Jiang)
- Address multiple assorted issues in the ACPI extlog driver (Dave
Jiang)
- Address two issues related to CXL in the ACPI APEI GHES driver (Dave
Jiang)
- Read only validated fields in cper_mem_err_pack() (Dave Jiang)
- Validate memory error section length before payload access, prevent
writes past array bounds from occurring and sanitize software
metadata in the ACPI APEI GHES driver (Dave Jiang)
- Make cxl_cper_handle_prot_err() static (Dave Jiang)
* acpi-pci:
ACPI: PCI: pci_link: clear driver_data before free
* acpi-apei:
ACPI: APEI: accumulate the queued flag across error sections
PCI/AER: Map a raw AER Capability image field by field
Documentation: ACPI: EINJ: Update stale driver source reference
cxl/ras: Make cxl_cper_handle_prot_err() static
ACPI: APEI: GHES: Bound AER info copy and sanitize software metadata
ACPI: APEI: GHES: Validate memory error section length before payload access
efi/cper: Read only validated fields in cper_mem_err_pack()
ACPI: APEI: GHES: Validate CXL protocol error section length before RAS cap copy
ACPI: APEI: GHES: Bound CXL event record copy to the firmware section length
ACPI: extlog: Fix CONFIG_ACPI_APEI_PCIEAER guard typo
ACPI: extlog: Validate PCIe error section length before payload access
ACPI: extlog: Avoid populating software AER metadata from raw hardware buffer
ACPI: extlog: Defer CXL protocol error handling to avoid lock inversion
ACPI: extlog: Validate elog record length before walking sections
efi/cper: Reject an error status block length that wraps a u32
efi/cper: Reject CPER records with an out-of-range error_data_length
|
|
Merge ACPI table parser updates, an ACPI OS services layer (OSL) update,
ACPI utility API updates, and ACPI power management updates for 7.4:
- Remove __meminitdata from hmat_adist_nb declaration preserving it
even when CONFIG_MEMORY_HOTPLUG is not set to prevent notifier chain
corruption in some cases (Alejandro Lucero)
- Prevent a NULL pointer dereference when attempting to read the table
length after a mapping bookkeeping failure during an initrd override
invocation with permanent table mappings enabled (Slavin Liu)
- Use for_each_populated_zone() in get_node_num() in the MRRM table
pareser (Sang-Heon Jeon)
- Use vsnprintf() in acpi_os_vprintf() to prevent memory corruption
resulting from overly long diagnostic messages that may not fit into
a static buffer used by ACPICA and may be produced by a malformed
ACPI table (Vlatko Kosturjak)
- Ignore leading root scope prefix in string _UID match to allow AMD
IOMMU matching to work as expected in some cases (Mario Limonciello)
- Adjust message printing macros for ACPI objects to use dev_fmt() for
more consistency with the analogous dev_*() macros (Rafael Wysocki)
- Add _Ixx GPE wake indicator support to the x86 suspend-to-idle
handling code (Saranya Gopal)
- Add quirks to avoid turning off unused ACPI power resources on Acer
Swift 3 SF314-56G (MX250), Casper Excalibur G900, and Acer Aspire
A515-53G (Matthias Dittrich, Hakan Abay, Krittikun Wongnin)
- Drop unused sleep_no_lps0 define from the generic ACPI system sleep
handling code (Riwen Lu)
* acpi-tables:
ACPI: HMAT: preserve hmat_adist_nb notifier block
ACPI: tables: handle failed initrd override mappings
ACPI: MRRM: Use for_each_populated_zone() in get_node_num()
* acpi-osl:
ACPI: OSL: Use vsnprintf() in acpi_os_vprintf()
* acpi-utils:
ACPI: utils: Ignore leading root scope prefix in string _UID match
ACPI: utils: Adjust message printing macros for ACPI objects
* acpi-pm:
ACPI: PM: Add Acer Aspire A515-53G to dmi_leave_unused_power_resources_on[]
ACPI: PM: sleep: Drop unused sleep_no_lps0 define
ACPI: PM: Add unused power resource quirk for Casper Excalibur G900
ACPI: PM: Add quirk for Acer Swift 3 SF314-56G (MX250)
ACPI: PM: s2idle: Add _Ixx GPE wake indicator support
|
|
Merge ACPI support infrastructure changes for 7.4:
- Make the core ACPI device enumeration code stop attempting to
initialize ACPI power management for devices before they are
known to be present and functional (Rafael Wysocki)
- Simplify and clean up the core ACPI device enumeration code on top of
the previous adjustment and reduce debug noise coming from it (Rafael
Wysocki)
- Fix locking in the code binding devices to their ACPI companions,
prevent it from replacing a valid ACPI companion pointer with NULL
incidentally, improve its messaging (including debug noise
reduction), and reduce its overhead by making it skip the cases in
which no ACPI companion may exist early (Rafael Wysocki)
- Reduce runtime memory footprint of struct acpi_device by rearranging
fields in it (Andy Shevchenko)
- Update the driver core to allow bus types without drivers to be
registered as "companion bus types" without driver-related sysfs
attributes and register the ACPI bus type as a companion one (Rafael
Wysocki)
- Use strscpy() instead of strcpy() in the ACPI sysfs interface (Ruslan
Vagner)
* acpi-scan:
ACPI: scan: Combine two conditionals in acpi_bus_attach()
ACPI: PM: Move acpi_bus_init_power() declaration to internal header file
ACPI: scan: Stop calling acpi_bus_init_power() early
ACPI: PM: Drop parent state update from acpi_device_get_power()
ACPI: scan: Drop useless and noisy debug statement
* acpi-glue:
ACPI: glue: Skip devices with no type in acpi_device_notify()
ACPI: glue: Fix up and adjust acpi_unbind_one()
ACPI: glue: Rearrange acpi_bind_one() to avoid breakage
ACPI: glue: Carry out companion lookup under bus_type_sem
ACPI: glue: Rework the success message in acpi_device_notify()
ACPI: glue: Reduce debug noise from acpi_device_notify()
* acpi-bus:
driver core/ACPI: Introduce companion_bus_register()
ACPI: bus: Reduce runtime memory footprint of struct acpi_device
* acpi-sysfs:
ACPI: sysfs: use strscpy() instead of strcpy()
|
|
The configfs_bin_attribute structures defined by driver are never
modified. Make them const.
As there are only two users of these attributes, adapt them in the same
commit to avoid a phased transition.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Andreas Hindborg <a.hindborg@kernel.org>
Link: https://patch.msgid.link/20260716-configfs-const-base-v1-4-c545a4053cb5@weissschuh.net
Signed-off-by: Breno Leitao <leitao@debian.org>
|
|
On the Acer Aspire A515-53G (Whiskey Lake + NVIDIA GeForce MX230), the
dGPU behind root port RP05 (00:1c.4) falls off the bus during boot and
is unusable until the next power cycle:
nvidia 0000:02:00.0: Unable to change power state from D3cold to D0, device inaccessible
NVRM: The NVIDIA GPU 0000:02:00.0 ... has fallen off the bus
The firmware ships two SSDTs which both provide power management for
the dGPU:
- One SSDT defines \_SB.PCI0.RP05.PC01 together with
RP05._PR0/_PR2/_PR3 = { PC01 }.
- A second SSDT defines \_SB.PCI0.RP05.PCRP (_STA initially One,
_OFF calls \_SB.PCI0.HGOF, which puts the link into L2/L3 and drops
the dGPU power enable GPIO) and its own RP05._PR0/_PR2/_PR3/_S0W.
The latter fail to load:
ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.RP05._PR0], AE_ALREADY_EXISTS
As a result PCRP is not referenced by any device and
acpi_turn_off_unused_power_resources() turns it off right after the
ACPI namespace scan. This cuts power to the dGPU, but PC01 still
believes it is on, so its _ON method is a no-op when the PCI core later
tries to bring the GPU back to D0.
Windows does not turn off unused power resources, so the dGPU works
there.
Add the machine to dmi_leave_unused_power_resources_on[], like the
THUNDEROBOT ZERO which has a similar SSDT bug. With this change the
dGPU stays on the bus and the nvidia driver binds. Runtime PM of the
dGPU is unaffected, as it is handled through PC01: with no driver
bound and power/control set to auto, RP05 reaches D3cold and the GPU
comes back to D0 on resume.
Link: https://lore.kernel.org/r/CADS-TgDQ1G8vrTQLJeQ3RTBVFTyMe0C+5p2=UBKS=EFCDFuaxw@mail.gmail.com/
Signed-off-by: Krittikun Wongnin <krittikunwongnin@gmail.com>
[ rjw: Subject and changelog tweaks ]
Link: https://patch.msgid.link/20261013074245.4327-1-krittikunwongnin@gmail.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The WMI-ACPI driver now supports architectures other than x86.
Remove the CONFIG_X86 handling from video-detect and the associated
drivers to simplify the resulting code.
Acked-by: Rafael J. Wysocki (Intel) <rafael@kernel.org>
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Acked-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patch.msgid.link/20260724025959.142826-3-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
The Dell OptiPlex AIO 7410 35W (board 01KP8D) declares DELL0501 in its
ACPI DSDT (status = 0x0F) even though no UART scalar board is physically
present. This causes acpi_video_get_backlight_type() to return
acpi_backlight_dell_uart, which makes i915 skip registering
intel_backlight. The dell-uart-backlight driver then times out talking
to the absent board and the probe fails, leaving the machine with zero
backlight control.
A BIOS update fixes this on some models (e.g. OptiPlex 7420, board
0914RT) by setting DELL0501 _STA to 0, but Dell has not shipped a
corrected BIOS for the 7410 even in the latest release (1.37.0,
2026-05-28).
Add a DMI quirk to force native backlight on this model so that i915
registers intel_backlight and brightness control works out of the box.
Tested on:
- OptiPlex AIO 7410 35W (01KP8D, BIOS 1.37.0) -- confirmed
acpi_backlight=native produces working intel_backlight (raw,
max=96000), DMI quirk has the same effect.
- OptiPlex AIO 7420 35W (0914RT, BIOS 1.27.0) -- DELL0501 absent in
updated BIOS, intel_backlight works natively (no regression).
Signed-off-by: Chitransh Mandhaniya <Chitransh_Mandhaniya@dell.com>
Reviewed-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Link: https://patch.msgid.link/20261010124830.116750-1-chitranshmandhaniya@gmail.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The sleep_no_lps0 stub define in the !CONFIG_ACPI_SLEEP branch of
sleep.c has no users left in that file: the LPS0 code consuming it
was moved to drivers/acpi/x86/s2idle.c by commit fef98671194b ("ACPI:
PM: s2idle: Move x86-specific code to the x86 directory"), which has
its own static module parameter of the same name, so the define is
no longer used.
Drop it.
Signed-off-by: Riwen Lu <luriwen@kylinos.cn>
Link: https://patch.msgid.link/20261008025152.153073-1-luriwen@kylinos.cn
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
On the Casper Excalibur G900, the NVIDIA discrete GPU and the second
NVMe device become inaccessible when unused ACPI power resources are
turned off during initialization.
The failure is similar to the THUNDEROBOT ZERO case addressed by
commit cd7ef20ba8c6 ("ACPI: PM: Add unused power resource quirk for THUNDEROBOT ZERO").
Without the quirk, the NVIDIA GPU and the second NVMe device are left
inaccessible in D3cold and attempts to transition them back to D0 fail.
Add a DMI quirk for the affected Casper Excalibur G900 with NLCC 001
mainboard to leave unused ACPI power resources on.
With the quirk applied, the second NVMe device remains accessible. The
NVIDIA GPU can enter D3cold while idle and subsequently return to D0
for accelerated rendering.
Link: https://bugs.kali.org/view.php?id=9891
Signed-off-by: Hakan Abay <hakan.abay84@gmail.com>
Link: https://patch.msgid.link/20261005174939.53873-1-hakan.abay84@gmail.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
On a ThinkPad T480 booted with the removable battery absent, reinserting
that battery can leave BAT1 missing from /sys/class/power_supply even
after firmware sends an ACPI add notification.
The battery dock platform device already exists, but its driver did not
bind while the battery was absent. During hotplug, acpi_bus_scan()
updates the ACPI device and attempts to attach it on the ACPI bus.
acpi_create_platform_device() does not create another platform device
because the existing physical node is still associated with the ACPI
device. Consequently, the existing platform device remains unbound.
Retry probing the battery dock platform device after hotplug_dock_devices()
has refreshed the ACPI state. Restrict this to battery docks. If the
platform device is already bound, device_initial_probe() leaves that
binding in place.
Signed-off-by: Vibhor Goel <vibhor1102@gmail.com>
[ rjw: Add empty code line after a conditional ]
Link: https://patch.msgid.link/20261003164019.11195-1-vibhor1102@gmail.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
acpi_pci_link_remove() frees the link object without clearing the ACPI
device's driver_data pointer. The ACPI device survives hot-removal and
can later be retrieved by acpi_fetch_acpi_dev(), leaving callers with a
dangling pointer.
Clear driver_data before freeing the link.
Fixes: db89b4f0dbab ("ACPI: catch calls of acpi_driver_data on pointer of wrong type")
Signed-off-by: Jiale Yao <yaojiale02@163.com>
[ rjw: Subject tweak ]
Link: https://patch.msgid.link/20260925155846.2381956-1-yaojiale02@163.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|