| Age | Commit message (Collapse) | Author |
|---|
|
Commit 89d9cec3b1e9 ("PM: runtime: Clear power.needs_force_resume in
pm_runtime_reinit()") added provisional clearing of power.needs_force_resume
to pm_runtime_reinit(), but it is done unconditionally which is a
mistake because pm_runtime_reinit() may race with driver probing
and removal [1].
To address this, notice that power.needs_force_resume should never
be set when runtime PM is enabled and so it only needs to be cleared
when runtime PM is disabled, and update pm_runtime_init() to only
clear that flag when runtime PM is disabled.
Fixes: 89d9cec3b1e9 ("PM: runtime: Clear power.needs_force_resume in pm_runtime_reinit()")
Reported-by: Ed Tsai <ed.tsai@mediatek.com>
Closes: https://lore.kernel.org/linux-pm/20251215122154.3180001-1-ed.tsai@mediatek.com/ [1]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: 6.17+ <stable@vger.kernel.org> # 6.17+
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://patch.msgid.link/12807571.O9o76ZdvQC@rafael.j.wysocki
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more power management updates from Rafael Wysocki:
"Fix a runtime PM unit test added during the 6.18 development cycle and
change the pm_runtime_barrier() return type to void (Brian Norris)"
* tag 'pm-6.19-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
coccinelle: Drop pm_runtime_barrier() error code checks
PM: runtime: Make pm_runtime_barrier() return void
PM: runtime: Stop checking pm_runtime_barrier() return code
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm
Pull pmdomain updates from Ulf Hansson:
"pmdomain core:
- Allow power-off for out-of-band wakeup-capable devices
- Drop the redundant call to dev_pm_domain_detach() for the amba bus
- Extend the genpd governor for CPUs to account for IPIs
pmdomain providers:
- bcm: Add support for BCM2712
- mediatek: Add support for MFlexGraphics power domains
- mediatek: Add support for MT8196 power domains
- qcom: Add RPMh power domain support for Kaanapali
- rockchip: Add support for RV1126B
pmdomain consumers:
- usb: dwc3: Enable out of band wakeup for i.MX95
- usb: chipidea: Enable out of band wakeup for i.MX95"
* tag 'pmdomain-v6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm: (26 commits)
pmdomain: Extend the genpd governor for CPUs to account for IPIs
smp: Introduce a helper function to check for pending IPIs
pmdomain: mediatek: convert from clk round_rate() to determine_rate()
amba: bus: Drop dev_pm_domain_detach() call
pmdomain: bcm: bcm2835-power: Prepare to support BCM2712
pmdomain: mediatek: mtk-mfg: select MAILBOX in Kconfig
pmdomain: mediatek: Add support for MFlexGraphics
pmdomain: mediatek: Fix build-errors
cpuidle: psci: Replace deprecated strcpy in psci_idle_init_cpu
pmdomain: rockchip: Add support for RV1126B
pmdomain: mediatek: Add support for MT8196 HFRPSYS power domains
pmdomain: mediatek: Add support for MT8196 SCPSYS power domains
pmdomain: mediatek: Add support for secure HWCCF infra power on
pmdomain: mediatek: Add support for Hardware Voter power domains
pmdomain: qcom: rpmhpd: Add RPMh power domain support for Kaanapali
usb: dwc3: imx8mp: Set out of band wakeup for i.MX95
usb: chipidea: ci_hdrc_imx: Set out of band wakeup for i.MX95
usb: chipidea: core: detach power domain for ci_hdrc platform device
pmdomain: core: Allow power-off for out-of-band wakeup-capable devices
PM: wakeup: Add out-of-band system wakeup support for devices
...
|
|
No callers check the return code, and that's a good thing. Doing so
would be racy and unhelpful.
Drop the return code entirely, so we don't make anyone think about its
complexities.
Signed-off-by: Brian Norris <briannorris@chromium.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Link: https://patch.msgid.link/20251202193129.1411419-2-briannorris@chromium.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Apparently this test is the only code that checks the return code from
pm_runtime_barrier(), and it turns out that's for good reason -- it's
inherently racy, and a bad idea. We're going to make
pm_runtime_barrier() return void, so prepare for that by dropping any
return code checks.
This resolves some test failures seen like the following:
[ 34.559694] # pm_runtime_error_test: EXPECTATION FAILED at drivers/base/power/runtime-test.c:177
[ 34.559694] Expected 1 == pm_runtime_barrier(dev), but
[ 34.559694] pm_runtime_barrier(dev) == 0 (0x0)
[ 34.563604] # pm_runtime_error_test: pass:0 fail:1 skip:0 total:1
Reported-by: Guenter Roeck <linux@roeck-us.net>
Closes: https://lore.kernel.org/lkml/93259f2b-7017-4096-a31b-cabbf6152e9b@roeck-us.net/
Signed-off-by: Brian Norris <briannorris@chromium.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Link: https://patch.msgid.link/20251202193129.1411419-1-briannorris@chromium.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Merge updates related to system suspend and hibernation for 6.19-rc1:
- Replace snprintf() with scnprintf() in show_trace_dev_match()
(Kaushlendra Kumar)
- Fix memory allocation error handling in pm_vt_switch_required()
(Malaya Kumar Rout)
- Introduce CALL_PM_OP() macro and use it to simplify code in
generic PM operations (Kaushlendra Kumar)
- Add module param to backtrace all CPUs in the device power management
watchdog (Sergey Senozhatsky)
- Rework message printing in swsusp_save() (Rafael Wysocki)
- Make it possible to change the number of hibernation compression
threads (Xueqin Luo)
- Clarify that only cgroup1 freezer uses PM freezer (Tejun Heo)
- Add document on debugging shutdown hangs to PM documentation and
correct a mistaken configuration option in it (Mario Limonciello)
- Shut down wakeup source timer before removing the wakeup source from
the list (Kaushlendra Kumar, Rafael Wysocki)
- Introduce new PMSG_POWEROFF event for system shutdown handling with
the help of PM device callbacks (Mario Limonciello)
- Make pm_test delay interruptible by wakeup events (Riwen Lu)
- Clean up kernel-doc comment style usage in the core hibernation
code and remove unuseful comments from it (Sunday Adelodun, Rafael
Wysocki)
- Add support for handling wakeup events and aborting the suspend
process while it is syncing file systems (Samuel Wu, Rafael Wysocki)
* pm-sleep: (21 commits)
PM: hibernate: Extra cleanup of comments in swap handling code
PM: sleep: Call pm_sleep_fs_sync() instead of ksys_sync_helper()
PM: sleep: Add support for wakeup during filesystem sync
PM: hibernate: Clean up kernel-doc comment style usage
PM: suspend: Make pm_test delay interruptible by wakeup events
usb: sl811-hcd: Add PM_EVENT_POWEROFF into suspend callbacks
scsi: Add PM_EVENT_POWEROFF into suspend callbacks
PM: Introduce new PMSG_POWEROFF event
PM: wakeup: Update after recent wakeup source removal ordering change
PM: wakeup: Delete timer before removing wakeup source from list
Documentation: power: Correct a mistaken configuration option
Documentation: power: Add document on debugging shutdown hangs
freezer: Clarify that only cgroup1 freezer uses PM freezer
PM: hibernate: add sysfs interface for hibernate_compression_threads
PM: hibernate: make compression threads configurable
PM: hibernate: dynamically allocate crc->unc_len/unc for configurable threads
PM: hibernate: Rework message printing in swsusp_save()
PM: dpm_watchdog: add module param to backtrace all CPUs
PM: sleep: Introduce CALL_PM_OP() macro to simplify code
PM: console: Fix memory allocation error handling in pm_vt_switch_required()
...
|
|
Merge a core power management update and runtime PM framework updates
for 6.19-rc1:
- Add WQ_UNBOUND to pm_wq workqueue (Marco Crivellari)
- Add runtime PM wrapper macros for ACQUIRE()/ACQUIRE_ERR() and use
them in the PCI core and the ACPI TAD driver (Rafael Wysocki)
- Improve runtime PM in the ACPI TAD driver (Rafael Wysocki)
- Update pm_runtime_allow/forbid() documentation (Rafael Wysocki)
- Fix typos in runtime.c comments (Malaya Kumar Rout)
* pm-core:
PM: WQ_UNBOUND added to pm_wq workqueue
* pm-runtime:
PCI/sysfs: Use PM_RUNTIME_ACQUIRE()/PM_RUNTIME_ACQUIRE_ERR()
ACPI: TAD: Use PM_RUNTIME_ACQUIRE()/PM_RUNTIME_ACQUIRE_ERR()
PM: runtime: Wrapper macros for ACQUIRE()/ACQUIRE_ERR()
PM: runtime: fix typos in runtime.c comments
ACPI: TAD: Improve runtime PM using guard macros
ACPI: TAD: Rearrange runtime PM operations in acpi_tad_remove()
PM: runtime: docs: Update pm_runtime_allow/forbid() documentation
|
|
|
|
Some devices can wake up the system from suspend even when their power
domains are turned off. This is possible because their system-wakeup logic
resides in an always-on power domain - indicating that they support
out-of-band system wakeup.
Currently, PM domain core doesn't power off such devices if they are marked
as system wakeup sources. To better represent devices with out-of-band
wakeup capability, this patch introduces a new flag out_band_wakeup in
'struct dev_pm_info'.
Two helper APIs are added:
- device_set_out_band_wakeup() - to mark a device as having out-of-band
wakeup capability.
- device_out_band_wakeup() - to query the flag.
Allow the PM core and drivers to distinguish between regular and
out-of-band wakeup sources, enable more accurate power management decision.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Runtime PM should only be enabled in device_resume_early() if it has
been disabled for the given device by device_suspend_late(). Otherwise,
it may cause runtime PM callbacks to run prematurely in some cases
which leads to further functional issues.
Make two changes to address this problem.
First, reorder device_suspend_late() to only disable runtime PM for a
device when it is going to look for the device's callback or if the
device is a "syscore" one. In all of the other cases, disabling runtime
PM for the device is not in fact necessary. However, if the device's
callback returns an error and the power.is_late_suspended flag is not
going to be set, enable runtime PM so it only remains disabled when
power.is_late_suspended is set.
Second, make device_resume_early() only enable runtime PM for the
devices with the power.is_late_suspended flag set.
Fixes: 443046d1ad66 ("PM: sleep: Make suspend of devices more asynchronous")
Reported-by: Rose Wu <ya-jou.wu@mediatek.com>
Closes: https://lore.kernel.org/linux-pm/70b25dca6f8c2756d78f076f4a7dee7edaaffc33.camel@mediatek.com/
Cc: 6.16+ <stable@vger.kernel.org> # 6.16+
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/12784270.O9o76ZdvQC@rafael.j.wysocki
|
|
PMSG_POWEROFF will be used for the PM core to allow differentiating between
a hibernation or shutdown sequence when re-using callbacks for common code.
Hibernation is started by writing a hibernation method (such as 'platform'
'shutdown', or 'reboot') to use into /sys/power/disk and writing 'disk' to
/sys/power/state.
Shutdown is initiated with the reboot() syscall with arguments on whether
to halt the system or power it off.
Tested-by: Eric Naim <dnaim@cachyos.org>
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
Link: https://patch.msgid.link/20251112224025.2051702-2-superm1@kernel.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
After a recent change, wakeup_source_activate() will warn that the given
wakeup source is "unregistered" after its timer has been shut down
in wakeup_source_remove() which may be somewhat confusing, so change
the warning message to say that the wakeup source is "unusable".
Accordingly, rename wakeup_source_not_registered() to
wakeup_source_not_usable() and update the comment in it
to also mention the removal of the wakeup source.
Also restore the comment in wakeup_source_remove() regarding the warning
in wakeup_source_activate() that may trigger after shutting down the
wakeup source timer.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/12788103.O9o76ZdvQC@rafael.j.wysocki
|
|
Replace timer_delete_sync() with timer_shutdown_sync() and move
it before list_del_rcu() in wakeup_source_remove() to improve the
cleanup ordering and code clarity.
This ensures that the timer is stopped before removing the wakeup
source from the events list, providing a more logical cleanup
sequence.
While the current ordering is functionally correct, stopping the
timer first makes the cleanup flow more intuitive and follows the
general pattern of disabling active components before removing data
structures.
Signed-off-by: Kaushlendra Kumar <kaushlendra.kumar@intel.com>
[ rjw: Subject and changelog edits ]
Link: https://patch.msgid.link/20251027044127.2456365-1-kaushlendra.kumar@intel.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Fix several typos in comments:
- "timesptamp" -> "timestamp"
- "involed" -> "involved"
- "nonero" -> "nonzero"
Fix typos in comments to improve code documentation clarity.
Signed-off-by: Malaya Kumar Rout <mrout@redhat.com>
Link: https://patch.msgid.link/20251026170527.262003-1-mrout@redhat.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Drop confusing descriptions of pm_runtime_allow() and pm_runtime_forbid()
from Documentation/power/runtime_pm.rst and update the kerneldoc comments
of these functions to better explain their purpose.
Link: https://lore.kernel.org/linux-pm/08976178-298f-79d9-1d63-cff5a4e56cc3@linux.intel.com/
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://patch.msgid.link/12780841.O9o76ZdvQC@rafael.j.wysocki
|
|
Add dpm_watchdog_all_cpu_backtrace module parameter which
controls all CPU backtrace dump before the DPM watchdog panics
the system.
This is expected to help understand what might have caused device
timeout.
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Link: https://patch.msgid.link/20251007063551.3147937-1-senozhatsky@chromium.org
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Add CALL_PM_OP() macro to eliminate a repetitive code pattern in
power management generic operations.
Replace analogous driver PM callback invocation logic across all
pm_generic_*() functions with a single macro that handles the NULL
pointer checks and function calls.
This reduces code size while maintaining the same functionality and
improving code maintainability.
Signed-off-by: Kaushlendra Kumar <kaushlendra.kumar@intel.com>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Link: https://patch.msgid.link/20250919124437.3075016-1-kaushlendra.kumar@intel.com
[ rjw: Subject and changelog edits, adjust white space ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Replace snprintf() with scnprintf() in show_trace_dev_match() to simplify
buffer length handling. The scnprintf() function returns the number of
characters actually written (excluding the null terminator), which
eliminates the need for manual length checking and clamping.
This change removes the redundant size check since scnprintf() guarantees
that the return value will never exceed the buffer size, making the code
cleaner and less error-prone.
Signed-off-by: Kaushlendra Kumar <kaushlendra.kumar@intel.com>
Link: https://patch.msgid.link/20250922055231.3523680-1-kaushlendra.kumar@intel.com
[ rjw: Subject adjustment ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Merge runtime PM framework updates and a core power management code fix
for 6.18-rc1:
- Make pm_runtime_put*() family of functions return 1 when the
given device is already suspended which is consistent with the
documentation (Brian Norris)
- Add basic kunit tests for runtime PM API contracts and update return
values in kerneldoc coments for the runtime PM API (Brian Norris,
Dan Carpenter)
- Add auto-cleanup macros for runtime PM "resume and get" and "get
without resume" operations, use one of them in the PCI core and
drop the existing "free" macro introduced for similar purpose, but
somewhat cumbersome to use (Rafael Wysocki)
- Make the core power management code avoid waiting on device links
marked as SYNC_STATE_ONLY which is consistent with the handling of
those device links elsewhere (Pin-yen Lin)
* pm-core:
PM: sleep: Do not wait on SYNC_STATE_ONLY device links
* pm-runtime:
PM: runtime: Fix error checking for kunit_device_register()
PM: runtime: Introduce one more usage counter guard
PM: runtime: Drop DEFINE_FREE() for pm_runtime_put()
PCI/sysfs: Use runtime PM guard macro for auto-cleanup
PM: runtime: Add auto-cleanup macros for "resume and get" operations
PM: runtime: Update kerneldoc return codes
PM: runtime: Make put{,_sync}() return 1 when already suspended
PM: runtime: Add basic kunit tests for API contracts
|
|
The kunit_device_register() function never returns NULL, it returns
error pointers. Update the assertions to use
KUNIT_ASSERT_NOT_ERR_OR_NULL() instead of checking for NULL.
Fixes: 7f7acd193ba8 ("PM: runtime: Add basic kunit tests for API contracts")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
It is generally useful to be able to automatically drop a device's
runtime PM usage counter incremented by runtime PM operations that
resume a device and bump up its usage counter [1].
To that end, add guard definition macros allowing pm_runtime_put()
and pm_runtime_put_autosuspend() to be used for the auto-cleanup in
those cases.
Simply put, a piece of code like below:
pm_runtime_get_sync(dev);
.....
pm_runtime_put(dev);
return 0;
can be transformed with guard() like:
guard(pm_runtime_active)(dev);
.....
return 0;
(see the pm_runtime_put() call is gone).
However, it is better to do proper error handling in the majority of
cases, so doing something like this instead of the above is recommended:
ACQUIRE(pm_runtime_active_try, pm)(dev);
if (ACQUIRE_ERR(pm_runtime_active_try, &pm))
return -ENXIO;
.....
return 0;
In all of the cases in which runtime PM is known to be enabled for the
given device or the device can be regarded as operational (and so it can
be accessed) with runtime PM disabled, a piece of code like:
ret = pm_runtime_resume_and_get(dev);
if (ret < 0)
return ret;
.....
pm_runtime_put(dev);
return 0;
can be changed as follows:
ACQUIRE(pm_runtime_active_try, pm)(dev);
ret = ACQUIRE_ERR(pm_runtime_active_try, &pm);
if (ret < 0)
return ret;
.....
return 0;
(again, see the pm_runtime_put() call is gone).
Still, if the device cannot be accessed unless runtime PM has been
enabled for it, the pm_runtime_active_try_enabled guard variant
needs to be used, that is (in the context of the example above):
ACQUIRE(pm_runtime_active_try_enabled, pm)(dev);
ret = ACQUIRE_ERR(pm_runtime_active_try_enabled, &pm);
if (ret < 0)
return ret;
.....
return 0;
When the original code calls pm_runtime_put_autosuspend(), use one
of the "auto" guard variants, pm_runtime_active_auto/_try/_enabled,
so for example, a piece of code like:
ret = pm_runtime_resume_and_get(dev);
if (ret < 0)
return ret;
.....
pm_runtime_put_autosuspend(dev);
return 0;
will become:
ACQUIRE(pm_runtime_active_auto_try_enabled, pm)(dev);
ret = ACQUIRE_ERR(pm_runtime_active_auto_try_enabled, &pm);
if (ret < 0)
return ret;
.....
return 0;
Note that the cases in which the return value of pm_runtime_get_sync()
is checked can also be handled with the help of the new guard macros.
For example, a piece of code like:
ret = pm_runtime_get_sync(dev);
if (ret < 0) {
pm_runtime_put(dev);
return ret;
}
.....
pm_runtime_put(dev);
return 0;
can be rewritten as:
ACQUIRE(pm_runtime_active_auto_try_enabled, pm)(dev);
ret = ACQUIRE_ERR(pm_runtime_active_auto_try_enabled, &pm);
if (ret < 0)
return ret;
.....
return 0;
or pm_runtime_get_active_try can be used if transparent handling of
disabled runtime PM is desirable.
Link: https://lore.kernel.org/linux-pm/878qimv24u.wl-tiwai@suse.de/ [1]
Link: https://lore.kernel.org/linux-pm/20250926150613.000073a4@huawei.com/
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/2238241.irdbgypaU6@rafael.j.wysocki
[ rjw: Fixed leftovers from the previous version in the changelog ]
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Merge changes related to system sleep and runtime PM framework for
6.18-rc1:
- Annotate loops walking device links in the power management core
code as _srcu and add macros for walking device links to reduce the
likelihood of coding mistakes related to them (Rafael Wysocki)
- Document time units for *_time functions in the runtime PM API (Brian
Norris)
- Clear power.must_resume in noirq suspend error path to avoid resuming
a dependant device under a suspended parent or supplier (Rafael
Wysocki)
- Fix GFP mask handling during hybrid suspend and make the amdgpu
driver handle hybrid suspend correctly (Mario Limonciello, Rafael
Wysocki)
- Fix GFP mask handling after aborted hibernation in platform mode and
combine exit paths in power_down() to avoid code duplication (Rafael
Wysocki)
- Use vmalloc_array() and vcalloc() in the hibernation core to avoid
open-coded size computations (Qianfeng Rong)
- Fix typo in hibernation core code comment (Li Jun)
- Call pm_wakeup_clear() in the same place where other functions that do
bookkeeping prior to suspend_prepare() are called (Samuel Wu)
* pm-core:
PM: core: Add two macros for walking device links
PM: core: Annotate loops walking device links as _srcu
* pm-runtime:
PM: runtime: Documentation: ABI: Document time units for *_time
* pm-sleep:
PM: hibernate: Combine return paths in power_down()
PM: hibernate: Restrict GFP mask in power_down()
PM: hibernate: Fix pm_hibernation_mode_is_suspend() build breakage
drm/amd: Fix hybrid sleep
PM: hibernate: Add pm_hibernation_mode_is_suspend()
PM: hibernate: Fix hybrid-sleep
PM: sleep: core: Clear power.must_resume in noirq suspend error path
PM: sleep: Make pm_wakeup_clear() call more clear
PM: hibernate: Fix typo in memory bitmaps description comment
PM: hibernate: Use vmalloc_array() and vcalloc() to improve code
|
|
Device links with DL_FLAG_SYNC_STATE_ONLY should not affect system
suspend and resume, and functions like device_reorder_to_tail() and
device_link_add() don't try to reorder the consumers with that flag.
However, dpm_wait_for_consumers() and dpm_wait_for_suppliers() don't
check thas flag before triggering dpm_wait(), leading to potential hang
during suspend/resume.
This can be reproduced on MT8186 Corsola Chromebook with devicetree like:
usb-a-connector {
compatible = "usb-a-connector";
port {
usb_a_con: endpoint {
remote-endpoint = <&usb_hs>;
};
};
};
usb_host {
compatible = "mediatek,mt8186-xhci", "mediatek,mtk-xhci";
port {
usb_hs: endpoint {
remote-endpoint = <&usb_a_con>;
};
};
};
In this case, the two nodes form a cycle and a SYNC_STATE_ONLY devlink
between usb_host (supplier) and usb-a-connector (consumer) is created.
Address this by exporting device_link_flag_is_sync_state_only() and
making dpm_wait_for_consumers() and dpm_wait_for_suppliers() use it
when deciding if dpm_wait() should be called.
Fixes: 05ef983e0d65a ("driver core: Add device link support for SYNC_STATE_ONLY flag")
Signed-off-by: Pin-yen Lin <treapking@chromium.org>
Link: https://patch.msgid.link/20250926102320.4053167-1-treapking@chromium.org
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The pm_runtime.h docs say pm_runtime_put() and pm_runtime_put_sync()
return 1 when already suspended, but this is not true -- they return
-EAGAIN. On the other hand, pm_runtime_put_sync_suspend() and
pm_runtime_put_sync_autosuspend() *do* return 1.
This is an artifact of the fact that the former are built on rpm_idle(),
whereas the latter are built on rpm_suspend().
There are precious few pm_runtime_put()/pm_runtime_put_sync() callers
that check the return code at all, but most of them only log errors, and
usually only for negative error codes. None of them should be treating
this as an error, so:
* at best, this may fix some case where a driver treats this condition
as an error, when it shouldn't;
* at worst, this should make no effect; and
* somewhere in between, we could potentially clear up non-fatal log
messages.
Fix the pm_runtime_already_suspended_test() while tweaking the behavior.
The test makes a lot more sense when these all return 1 when the device
is already suspended:
pm_runtime_put_sync(dev);
pm_runtime_suspend(dev);
pm_runtime_autosuspend(dev);
pm_request_autosuspend(dev);
pm_runtime_put_sync_autosuspend(dev);
Notably, I've avoided testing the return codes for these, since they
really should be ignored by callers, and we may make them 'void'
altogether:
pm_runtime_put(dev);
pm_runtime_put_autosuspend(dev);
Signed-off-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
In exploring the various return codes and failure modes of runtime PM
APIs, I found it helpful to verify and codify many of them in unit
tests, especially given that even the kerneldoc can be rather complex to
reason through, and it also has had subtle errors of its own.
Notably, I avoid testing the return codes for pm_runtime_put() and
pm_runtime_put_autosuspend(), since code that checks them is probably
wrong, and we're considering making them return 'void' altogether. I
still test the sync() variants, since those have a bit more meaning to
them.
Signed-off-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Add separate macros for walking links to suppliers and consumers of a
device to help device links users to avoid exposing the internals of
struct dev_links_info in their code and possible coding mistakes related
to that.
Accordingly, use the new macros to replace open-coded device links list
walks in the core power management code.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/1944671.tdWV9SEqCh@rafael.j.wysocki
|
|
Since SRCU is used for the protection of device link lists, the loops
over device link lists in multiple places in drivers/base/power/main.c
and in pm_runtime_get_suppliers() should be annotated as _srcu rather
than as _rcu which is the case currently.
Change the annotations accordingly.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/2393512.ElGaqSPkdT@rafael.j.wysocki
|
|
If system suspend is aborted in the "noirq" phase (for instance, due to
an error returned by one of the device callbacks), power.is_noirq_suspended
will not be set for some devices and device_resume_noirq() will return
early for them. Consequently, noirq resume callbacks will not run for
them at all because the noirq suspend callbacks have not run for them
yet.
If any of them has power.must_resume set and late suspend has been
skipped for it (due to power.smart_suspend), early resume should be
skipped for it either, or its state may become inconsistent (for
instance, if the early resume assumes that it will always follow
noirq resume).
Make that happen by clearing power.must_resume in device_resume_noirq()
for devices with power.is_noirq_suspended clear that have been left in
suspend by device_suspend_late(), which will subsequently cause
device_resume_early() to leave the device in suspend and avoid
changing its state.
Fixes: 0d4b54c6fee8 ("PM / core: Add LEAVE_SUSPENDED driver flag")
Link: https://lore.kernel.org/linux-pm/5d692b81-6f58-4e86-9cb0-ede69a09d799@rowland.harvard.edu/
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://patch.msgid.link/3381776.aeNJFYEL58@rafael.j.wysocki
|
|
These iterations require the read lock, otherwise RCU
lockdep will splat:
=============================
WARNING: suspicious RCU usage
6.17.0-rc3-00014-g31419c045d64 #6 Tainted: G O
-----------------------------
drivers/base/power/main.c:1333 RCU-list traversed in non-reader section!!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
5 locks held by rtcwake/547:
#0: 00000000643ab418 (sb_writers#6){.+.+}-{0:0}, at: file_start_write+0x2b/0x3a
#1: 0000000067a0ca88 (&of->mutex#2){+.+.}-{4:4}, at: kernfs_fop_write_iter+0x181/0x24b
#2: 00000000631eac40 (kn->active#3){.+.+}-{0:0}, at: kernfs_fop_write_iter+0x191/0x24b
#3: 00000000609a1308 (system_transition_mutex){+.+.}-{4:4}, at: pm_suspend+0xaf/0x30b
#4: 0000000060c0fdb0 (device_links_srcu){.+.+}-{0:0}, at: device_links_read_lock+0x75/0x98
stack backtrace:
CPU: 0 UID: 0 PID: 547 Comm: rtcwake Tainted: G O 6.17.0-rc3-00014-g31419c045d64 #6 VOLUNTARY
Tainted: [O]=OOT_MODULE
Stack:
223721b3a80 6089eac6 00000001 00000001
ffffff00 6089eac6 00000535 6086e528
721b3ac0 6003c294 00000000 60031fc0
Call Trace:
[<600407ed>] show_stack+0x10e/0x127
[<6003c294>] dump_stack_lvl+0x77/0xc6
[<6003c2fd>] dump_stack+0x1a/0x20
[<600bc2f8>] lockdep_rcu_suspicious+0x116/0x13e
[<603d8ea1>] dpm_async_suspend_superior+0x117/0x17e
[<603d980f>] device_suspend+0x528/0x541
[<603da24b>] dpm_suspend+0x1a2/0x267
[<603da837>] dpm_suspend_start+0x5d/0x72
[<600ca0c9>] suspend_devices_and_enter+0xab/0x736
[...]
Add the fourth argument to the iteration to annotate
this and avoid the splat.
Fixes: 06799631d522 ("PM: sleep: Make async suspend handle suppliers like parents")
Fixes: ed18738fff02 ("PM: sleep: Make async resume handle consumers like children")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20250826134348.aba79f6e6299.I9ecf55da46ccf33778f2c018a82e1819d815b348@changeid
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Pull drm updates from Dave Airlie:
"Highlights:
- Intel xe enable Panthor Lake, started adding WildCat Lake
- amdgpu has a bunch of reset improvments along with the usual IP
updates
- msm got VM_BIND support which is important for vulkan sparse memory
- more drm_panic users
- gpusvm common code to handle a bunch of core SVM work outside
drivers.
Detail summary:
Changes outside drm subdirectory:
- 'shrink_shmem_memory()' for better shmem/hibernate interaction
- Rust support infrastructure:
- make ETIMEDOUT available
- add size constants up to SZ_2G
- add DMA coherent allocation bindings
- mtd driver for Intel GPU non-volatile storage
- i2c designware quirk for Intel xe
core:
- atomic helpers: tune enable/disable sequences
- add task info to wedge API
- refactor EDID quirks
- connector: move HDR sink to drm_display_info
- fourcc: half-float and 32-bit float formats
- mode_config: pass format info to simplify
dma-buf:
- heaps: Give CMA heap a stable name
ci:
- add device tree validation and kunit
displayport:
- change AUX DPCD access probe address
- add quirk for DPCD probe
- add panel replay definitions
- backlight control helpers
fbdev:
- make CONFIG_FIRMWARE_EDID available on all arches
fence:
- fix UAF issues
format-helper:
- improve tests
gpusvm:
- introduce devmem only flag for allocation
- add timeslicing support to GPU SVM
ttm:
- improve eviction
sched:
- tracing improvements
- kunit improvements
- memory leak fixes
- reset handling improvements
color mgmt:
- add hardware gamma LUT handling helpers
bridge:
- add destroy hook
- switch to reference counted drm_bridge allocations
- tc358767: convert to devm_drm_bridge_alloc
- improve CEC handling
panel:
- switch to reference counter drm_panel allocations
- fwnode panel lookup
- Huiling hl055fhv028c support
- Raspberry Pi 7" 720x1280 support
- edp: KDC KD116N3730A05, N160JCE-ELL CMN, N116BCJ-EAK
- simple: AUO P238HAN01
- st7701: Winstar wf40eswaa6mnn0
- visionox: rm69299-shift
- Renesas R61307, Renesas R69328 support
- DJN HX83112B
hdmi:
- add CEC handling
- YUV420 output support
xe:
- WildCat Lake support
- Enable PanthorLake by default
- mark BMG as SRIOV capable
- update firmware recommendations
- Expose media OA units
- aux-bux support for non-volatile memory
- MTD intel-dg driver for non-volatile memory
- Expose fan control and voltage regulator in sysfs
- restructure migration for multi-device
- Restore GuC submit UAF fix
- make GEM shrinker drm managed
- SRIOV VF Post-migration recovery of GGTT nodes
- W/A additions/reworks
- Prefetch support for svm ranges
- Don't allocate managed BO for each policy change
- HWMON fixes for BMG
- Create LRC BO without VM
- PCI ID updates
- make SLPC debugfs files optional
- rework eviction rejection of bound external BOs
- consolidate PAT programming logic for pre/post Xe2
- init changes for flicker-free boot
- Enable GuC Dynamic Inhibit Context switch
i915:
- drm_panic support for i915/xe
- initial flip queue off by default for LNL/PNL
- Wildcat Lake Display support
- Support for DSC fractional link bpp
- Support for simultaneous Panel Replay and Adaptive sync
- Support for PTL+ double buffer LUT
- initial PIPEDMC event handling
- drm_panel_follower support
- DPLL interface renames
- allocate struct intel_display dynamically
- flip queue preperation
- abstract DRAM detection better
- avoid GuC scheduling stalls
- remove DG1 force probe requirement
- fix MEI interrupt handler on RT kernels
- use backlight control helpers for eDP
- more shared display code refactoring
amdgpu:
- add userq slot to INFO ioctl
- SR-IOV hibernation support
- Suspend improvements
- Backlight improvements
- Use scaling for non-native eDP modes
- cleaner shader updates for GC 9.x
- Remove fence slab
- SDMA fw checks for userq support
- RAS updates
- DMCUB updates
- DP tunneling fixes
- Display idle D3 support
- Per queue reset improvements
- initial smartmux support
amdkfd:
- enable KFD on loongarch
- mtype fix for ext coherent system memory
radeon:
- CS validation additional GL extensions
- drop console lock during suspend/resume
- bump driver version
msm:
- VM BIND support
- CI: infrastructure updates
- UBWC single source of truth
- decouple GPU and KMS support
- DP: rework I/O accessors
- DPU: SM8750 support
- DSI: SM8750 support
- GPU: X1-45 support and speedbin support for X1-85
- MDSS: SM8750 support
nova:
- register! macro improvements
- DMA object abstraction
- VBIOS parser + fwsec lookup
- sysmem flush page support
- falcon: generic falcon boot code and HAL
- FWSEC-FRTS: fb setup and load/execute
ivpu:
- Add Wildcat Lake support
- Add turbo flag
ast:
- improve hardware generations implementation
imx:
- IMX8qxq Display Controller support
lima:
- Rockchip RK3528 GPU support
nouveau:
- fence handling cleanup
panfrost:
- MT8370 support
- bo labeling
- 64-bit register access
qaic:
- add RAS support
rockchip:
- convert inno_hdmi to a bridge
rz-du:
- add RZ/V2H(P) support
- MIPI-DSI DCS support
sitronix:
- ST7567 support
sun4i:
- add H616 support
tidss:
- add TI AM62L support
- AM65x OLDI bridge support
bochs:
- drm panic support
vkms:
- YUV and R* format support
- use faux device
vmwgfx:
- fence improvements
hyperv:
- move out of simple
- add drm_panic support"
* tag 'drm-next-2025-07-30' of https://gitlab.freedesktop.org/drm/kernel: (1479 commits)
drm/tidss: oldi: convert to devm_drm_bridge_alloc() API
drm/tidss: encoder: convert to devm_drm_bridge_alloc()
drm/amdgpu: move reset support type checks into the caller
drm/amdgpu/sdma7: re-emit unprocessed state on ring reset
drm/amdgpu/sdma6: re-emit unprocessed state on ring reset
drm/amdgpu/sdma5.2: re-emit unprocessed state on ring reset
drm/amdgpu/sdma5: re-emit unprocessed state on ring reset
drm/amdgpu/gfx12: re-emit unprocessed state on ring reset
drm/amdgpu/gfx11: re-emit unprocessed state on ring reset
drm/amdgpu/gfx10: re-emit unprocessed state on ring reset
drm/amdgpu/gfx9.4.3: re-emit unprocessed state on kcq reset
drm/amdgpu/gfx9: re-emit unprocessed state on kcq reset
drm/amdgpu: Add WARN_ON to the resource clear function
drm/amd/pm: Use cached metrics data on SMUv13.0.6
drm/amd/pm: Use cached data for min/max clocks
gpu: nova-core: fix bounds check in PmuLookupTableEntry::new
drm/amdgpu: Replace HQD terminology with slots naming
drm/amdgpu: Add user queue instance count in HW IP info
drm/amd/amdgpu: Add helper functions for isp buffers
drm/amd/amdgpu: Initialize swnode for ISP MFD device
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core
Pull driver core updates from Danilo Krummrich:
"debugfs:
- Remove unneeded debugfs_file_{get,put}() instances
- Remove last remnants of debugfs_real_fops()
- Allow storing non-const void * in struct debugfs_inode_info::aux
sysfs:
- Switch back to attribute_group::bin_attrs (treewide)
- Switch back to bin_attribute::read()/write() (treewide)
- Constify internal references to 'struct bin_attribute'
Support cache-ids for device-tree systems:
- Add arch hook arch_compact_of_hwid()
- Use arch_compact_of_hwid() to compact MPIDR values on arm64
Rust:
- Device:
- Introduce CoreInternal device context (for bus internal methods)
- Provide generic drvdata accessors for bus devices
- Provide Driver::unbind() callbacks
- Use the infrastructure above for auxiliary, PCI and platform
- Implement Device::as_bound()
- Rename Device::as_ref() to Device::from_raw() (treewide)
- Implement fwnode and device property abstractions
- Implement example usage in the Rust platform sample driver
- Devres:
- Remove the inner reference count (Arc) and use pin-init instead
- Replace Devres::new_foreign_owned() with devres::register()
- Require T to be Send in Devres<T>
- Initialize the data kept inside a Devres last
- Provide an accessor for the Devres associated Device
- Device ID:
- Add support for ACPI device IDs and driver match tables
- Split up generic device ID infrastructure
- Use generic device ID infrastructure in net::phy
- DMA:
- Implement the dma::Device trait
- Add DMA mask accessors to dma::Device
- Implement dma::Device for PCI and platform devices
- Use DMA masks from the DMA sample module
- I/O:
- Implement abstraction for resource regions (struct resource)
- Implement resource-based ioremap() abstractions
- Provide platform device accessors for I/O (remap) requests
- Misc:
- Support fallible PinInit types in Revocable
- Implement Wrapper<T> for Opaque<T>
- Merge pin-init blanket dependencies (for Devres)
Misc:
- Fix OF node leak in auxiliary_device_create()
- Use util macros in device property iterators
- Improve kobject sample code
- Add device_link_test() for testing device link flags
- Fix typo in Documentation/ABI/testing/sysfs-kernel-address_bits
- Hint to prefer container_of_const() over container_of()"
* tag 'driver-core-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core: (84 commits)
rust: io: fix broken intra-doc links to `platform::Device`
rust: io: fix broken intra-doc link to missing `flags` module
rust: io: mem: enable IoRequest doc-tests
rust: platform: add resource accessors
rust: io: mem: add a generic iomem abstraction
rust: io: add resource abstraction
rust: samples: dma: set DMA mask
rust: platform: implement the `dma::Device` trait
rust: pci: implement the `dma::Device` trait
rust: dma: add DMA addressing capabilities
rust: dma: implement `dma::Device` trait
rust: net::phy Change module_phy_driver macro to use module_device_table macro
rust: net::phy represent DeviceId as transparent wrapper over mdio_device_id
rust: device_id: split out index support into a separate trait
device: rust: rename Device::as_ref() to Device::from_raw()
arm64: cacheinfo: Provide helper to compress MPIDR value into u32
cacheinfo: Add arch hook to compress CPU h/w id into 32 bits for cache-id
cacheinfo: Set cache 'id' based on DT data
container_of: Document container_of() is not to be used in new code
driver core: auxiliary bus: fix OF node leak
...
|
|
Merge miscellaneous power management updates and cpupower utility
updates for 6.17-rc1:
- Update contact information in the PM ABI docs and maintainer
information in the power domains DT binding (Rafael Wysocki)
- Update PM header inclusions to follow the IWYU (Include What You Use)
principle (Andy Shevchenko)
- Add flags to specify power on attach/detach for PM domains, make the
driver core detach PM domains in device_unbind_cleanup(), and drop
the dev_pm_domain_detach() call from the platform bus type (Claudiu
Beznea)
- Improve Python binding's Makefile for cpupower (John B. Wyatt IV)
- Fix printing of CORE, CPU fields in cpupower-monitor (Gautham Shenoy)
* pm-misc:
PM: docs: Use my kernel.org address in ABI docs and DT bindings
driver core: platform: Drop dev_pm_domain_detach() call
PM: domains: Detach on device_unbind_cleanup()
PM: domains: Add flags to specify power on attach/detach
PM: Don't use "proxy" headers
* pm-tools:
cpupower: Improve Python binding's Makefile
pm: cpupower: Fix printing of CORE, CPU fields in cpupower-monitor
pm: cpupower: Fix the snapshot-order of tsc,mperf, clock in mperf_stop()
|
|
Merge runtime PM updates and power capping updates for 6.17-rc1:
- Document return values of suspend-related API functions in the
runtime PM framework (Sakari Ailus)
- Mark last busy stamp in multiple autosuspend-related functions in the
runtime PM framework and update its documentation (Sakari Ailus)
- Take active children into account in pm_runtime_get_if_in_use() for
consistency (Rafael Wysocki)
- Fix NULL pointer dereference in get_pd_power_uw() in the dtpm_cpu
power capping driver (Sivan Zohar-Kotzer)
- Add support for the Bartlett Lake platform to the Intel RAPL power
capping driver (Qiao Wei)
- Add PL4 support for Panther Lake to the intel_rapl_msr power capping
driver (Zhang Rui)
* pm-runtime:
PM: runtime: Take active children into account in pm_runtime_get_if_in_use()
Documentation: PM: *_autosuspend() functions update last busy time
PM: runtime: Mark last busy stamp in pm_request_autosuspend()
PM: runtime: Mark last busy stamp in pm_runtime_autosuspend()
PM: runtime: Mark last busy stamp in pm_runtime_put_sync_autosuspend()
PM: runtime: Mark last busy stamp in pm_runtime_put_autosuspend()
PM: runtime: Document return values of suspend-related API functions
* pm-powercap:
powercap: dtpm_cpu: Fix NULL pointer dereference in get_pd_power_uw()
powercap: intel_rapl: Add support for Bartlett Lake platform
powercap: intel_rapl_msr: Add PL4 support for Panther Lake
|
|
Notice that device_suspend_noirq(), device_suspend_late() and
device_suspend() all set async_error on errors, so they don't really
need to return a value. Accordingly, make them all void and use
async_error in their callers instead of their return values.
Moreover, since async_error is updated concurrently without locking
during asynchronous suspend and resume processing, use READ_ONCE() and
WRITE_ONCE() for accessing it in those places to ensure that all of the
accesses will be carried out as expected.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Saravana Kannan <saravanak@google.com>
Link: https://patch.msgid.link/6198088.lOV4Wx5bFT@rjwysocki.net
|
|
|
|
For all practical purposes, there is no difference between the situation
in which a given device is not ignoring children and its active child
count is nonzero and the situation in which its runtime PM usage counter
is nonzero. However, pm_runtime_get_if_in_use() will only increment the
device's usage counter and return 1 in the latter case.
For consistency, make it do so in the former case either by adjusting
pm_runtime_get_conditional() and update the related kerneldoc comments
accordingly.
Fixes: c111566bea7c ("PM: runtime: Add pm_runtime_get_if_active()")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Cc: 5.10+ <stable@vger.kernel.org> # 5.10+: c0ef3df8dbae: PM: runtime: Simplify pm_runtime_get_if_active() usage
Cc: 5.10+ <stable@vger.kernel.org> # 5.10+
Link: https://patch.msgid.link/12700973.O9o76ZdvQC@rjwysocki.net
|
|
After commit aa7a9275ab81 ("PM: sleep: Suspend async parents after
suspending children"), the following scenario is possible:
1. Device A is async and it depends on device B that is sync.
2. Async suspend is scheduled for A before the processing of B is
started.
3. A is waiting for B.
4. In the meantime, an unrelated device fails to suspend and returns
an error.
5. The processing of B doesn't start at all and its power.completion is
not updated.
6. A is still waiting for B when async_synchronize_full() is called.
7. Deadlock ensues.
To prevent this from happening, update power.completion for all devices
on errors in all suspend phases, but do not do it directly for devices
that are already being processed or are waiting for the processing to
start because in those cases it may be necessary to wait for the
processing to actually complete before updating power.completion for
the device.
Fixes: aa7a9275ab81 ("PM: sleep: Suspend async parents after suspending children")
Fixes: 443046d1ad66 ("PM: sleep: Make suspend of devices more asynchronous")
Closes: https://lore.kernel.org/linux-pm/e13740a0-88f3-4a6f-920f-15805071a7d6@linaro.org/
Reported-and-tested-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://patch.msgid.link/6191258.lOV4Wx5bFT@rjwysocki.net
|
|
|
|
dev_pm_ops.thaw() is called in following cases:
* normal case: after hibernation image has been created.
* error case 1: creation of a hibernation image has failed.
* error case 2: restoration from a hibernation image has failed.
For normal case, it is called mainly for resume storage devices for
saving the hibernation image. Other devices that are not involved
in the image saving do not need to resume the device. But since there's
no api to know which case thaw() is called, device drivers can't
conditionally resume device in thaw().
The new pm_hibernate_is_recovering() is such a api to query if thaw() is
called in normal case.
Signed-off-by: Samuel Zhang <guoqing.zhang@amd.com>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Link: https://lore.kernel.org/r/20250710062313.3226149-5-guoqing.zhang@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
|
|
Commit 12ffc3b1513e ("PM: Restrict swap use to later in the suspend
sequence") changed two pm_restore_gfp_mask() calls in enter_state()
and hibernation_restore() into one pm_restore_gfp_mask() call in
dpm_resume_end(), but it put that call before the dpm_resume()
invocation which is too early (some swap-backing devices may not be
ready at that point).
Moreover, this code ordering change was not even mentioned in the
changelog of the commit mentioned above.
Address this by moving that call after the dpm_resume() one.
Fixes: 12ffc3b1513e ("PM: Restrict swap use to later in the suspend sequence")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patch.msgid.link/2797018.mvXUDI8C0e@rjwysocki.net
|
|
The dev_pm_domain_attach() function is typically used in bus code
alongside dev_pm_domain_detach(), often following patterns like:
static int bus_probe(struct device *_dev)
{
struct bus_driver *drv = to_bus_driver(dev->driver);
struct bus_device *dev = to_bus_device(_dev);
int ret;
// ...
ret = dev_pm_domain_attach(_dev, true);
if (ret)
return ret;
if (drv->probe)
ret = drv->probe(dev);
// ...
}
static void bus_remove(struct device *_dev)
{
struct bus_driver *drv = to_bus_driver(dev->driver);
struct bus_device *dev = to_bus_device(_dev);
if (drv->remove)
drv->remove(dev);
dev_pm_domain_detach(_dev);
}
When the driver's probe function uses devres-managed resources that
depend on the power domain state, those resources are released later
during device_unbind_cleanup().
Releasing devres-managed resources that depend on the power domain state
after detaching the device from its PM domain can cause failures.
For example, if the driver uses devm_pm_runtime_enable() in its probe
function, and the device's clocks are managed by the PM domain, then
during removal the runtime PM is disabled in device_unbind_cleanup()
after the clocks have been removed from the PM domain. It may happen
that the devm_pm_runtime_enable() action causes the device to be runtime-
resumed. If the driver specific runtime PM APIs access registers directly,
this will lead to accessing device registers without clocks being enabled.
Similar issues may occur with other devres actions that access device
registers.
Add detach_power_off member to struct dev_pm_info, to be used
later in device_unbind_cleanup() as the power_off argument for
dev_pm_domain_detach(). This is a preparatory step toward removing
dev_pm_domain_detach() calls from bus remove functions. Since the current
PM domain detach functions (genpd_dev_pm_detach() and acpi_dev_pm_detach())
already set dev->pm_domain = NULL, there should be no issues with bus
drivers that still call dev_pm_domain_detach() in their remove functions.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://patch.msgid.link/20250703112708.1621607-3-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Calling dev_pm_domain_attach()/dev_pm_domain_detach() in bus driver
probe/remove functions can affect system behavior when the drivers
attached to the bus use devres-managed resources. Since devres actions
may need to access device registers, calling dev_pm_domain_detach() too
early, i.e., before these actions complete, can cause failures on some
systems. One such example is Renesas RZ/G3S SoC-based platforms.
If the device clocks are managed via PM domains, invoking
dev_pm_domain_detach() in the bus driver's remove function removes the
device's clocks from the PM domain, preventing any subsequent
pm_runtime_resume*() calls from enabling those clocks.
The second argument of dev_pm_domain_attach() specifies whether the PM
domain should be powered on during attachment. Likewise, the second
argument of dev_pm_domain_detach() indicates whether the domain should be
powered off during detachment.
Upcoming changes address the issue described above (initially for the
platform bus only) by deferring the call to dev_pm_domain_detach() until
after devres_release_all() in device_unbind_cleanup(). The detach_power_off
field in struct dev_pm_info stores the detach power off info from the
second argument of dev_pm_domain_attach().
Because there are cases where the device's PM domain power-on/off behavior
must be conditional (e.g., in i2c_device_probe()), the patch introduces
PD_FLAG_ATTACH_POWER_ON and PD_FLAG_DETACH_POWER_OFF flags to be passed
to dev_pm_domain_attach().
Finally, dev_pm_domain_attach() and its users are updated to use the newly
introduced PD_FLAG_ATTACH_POWER_ON and PD_FLAG_DETACH_POWER_OFF macros.
This change is preparatory.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com> # I2C
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://patch.msgid.link/20250703112708.1621607-2-claudiu.beznea.uj@bp.renesas.com
[ rjw: Changelog adjustments ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Add a new flag, called strict_midlayer, to struct dev_pm_info, along
with helper functions for updating and reading its value, to allow
middle layer code that provides proper callbacks for device suspend-
resume during system-wide PM transitions to let pm_runtime_force_suspend()
and and pm_runtime_force_resume() know that they should only invoke
runtime PM callbacks coming from the device's driver.
Namely, if this flag is set, pm_runtime_force_suspend() and
and pm_runtime_force_resume() will invoke runtime PM callbacks
provided by the device's driver directly with the assumption that
they have been called via a middle layer callback for device suspend
or resume, respectively.
For instance, acpi_general_pm_domain provides specific
callback functions for system suspend, acpi_subsys_suspend(),
acpi_subsys_suspend_late() and acpi_subsys_suspend_noirq(), and
it does not expect its runtime suspend callback function,
acpi_subsys_runtime_suspend(), to be invoked at any point during
system suspend. In particular, it does not expect that function
to be called from within any of the system suspend callback functions
mentioned above which would happen if a device driver collaborating
with acpi_general_pm_domain used pm_runtime_force_suspend() as its
callback function for any system suspend phase later than "prepare".
The new flag allows this expectation of acpi_general_pm_domain to
be formally expressed, which is going to be done subsequently.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://patch.msgid.link/24017035.6Emhk5qWAg@rjwysocki.net
|
|
Add a special function for computing the address of the runtime PM
callback given by an offset relative to the start of the device
driver's struct dev_pm_ops and use it to obtain the driver callback
in __rpm_get_callback().
Also put the shared part of the callback address computation into a
separate helper function to avoid code duplication and explicit
pointer type casts.
The new __rpm_get_driver_callback() will be used subsequently for
implementing callback lookup in pm_runtime_force_suspend/resume().
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://patch.msgid.link/2054356.usQuhbGJ8B@rjwysocki.net
|
|
Add a power.needs_force_resume check to pm_runtime_force_suspend() so
it need not rely on the runtime PM status of the device when deciding
whether or not to return early.
With the new check in place, pm_runtime_force_suspend() will also skip
devices with the runtime PM status equal to RPM_ACTIVE if they have
power.needs_force_resume set, so it won't need to change the RPM
status of the device to RPM_SUSPENDED in addition to setting
power.needs_force_resume in the case when pm_runtime_need_not_resume()
return false.
That allows the runtime PM status update to be removed from
pm_runtime_force_resume(), so the runtime PM status remains unchanged
between the pm_runtime_force_suspend() and pm_runtime_force_resume()
calls.
This change potentially unbreaks drivers that call pm_runtime_force_suspend()
from their ->remove() callbacks because currently, if the device being
unbound from its driver has a parent with enabled runtime PM and/or
(possibly) device links respecting runtime PM to suppliers, and it is
RPM_ACTIVE when the remove takes place, pm_runtime_force_suspend() will
not drop the parent's child count and the suppliers' runtime PM usage
counters after force-suspending the device unless pm_runtime_need_not_resume()
returns 'true' for it. Moreover, because pm_runtime_force_suspend()
changes the device's runtime PM status to RPM_SUSPENDED, in the above
case pm_runtime_reinit() will not cause those counters to drop, so they
will remain nonzero forever effectively preventing the devices in
question from runtime-suspending going forward.
This change is also needed for pm_runtime_force_suspend() to work
with PCI PM and ACPI PM after subsequent changes. Namely, say
DPM_FLAG_SMART_SUSPEND is set for a PCI device and its driver uses
pm_runtime_force_suspend() as its ->suspend() callback. If
pm_runtime_force_suspend() changed the runtime PM status of the
device to RPM_SUSPENDED, pci_pm_suspend_noirq() would skip the
device due to the dev_pm_skip_suspend() check.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://patch.msgid.link/1855933.VLH7GnMWUR@rjwysocki.net
|
|
Clear power.needs_force_resume in pm_runtime_reinit() in case it has
been set by pm_runtime_force_suspend() invoked from a driver remove
callback.
Suggested-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://patch.msgid.link/9495163.CDJkKcVGEf@rjwysocki.net
|
|
Curently, drivers using pm_runtime_force_suspend/resume() cannot set
DPM_FLAG_SMART_SUSPEND because the devices with that flag set may need
to be resumed during system-wide resume regardless of whether or not
they have power.needs_force_resume set. That can happen due to a
dependency resolved at the beginning of a system-wide resume transition
(for instance, a bus type or PM domain has decided to resume a
subordinate device with DPM_FLAG_SMART_SUSPEND and its parent and
suppliers also need to be resumed).
To overcome this limitation, modify pm_runtime_force_resume() to check
the device's power.smart_suspend flag (which is set for devices with
DPM_FLAG_SMART_SUSPEND set that meet some additional requirements) and
the device's runtime PM status in addition to power.needs_force_resume.
Also change it to clear power.smart_suspend to ensure that it will not
handle the same device twice during one transition.
The underlying observation is that there are two cases in which the
device needs to be resumed by pm_runtime_force_resume(). One of them
is when the device has power.needs_force_resume set, which means that
pm_runtime_force_suspend() has suspended it and decided that it should
be resumed during the subsequent system resume. The other one is when
power.smart_suspend is set and the device's runtume PM status is
RPM_ACTIVE.
Update kerneldoc comments in accordance with the code changes.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://patch.msgid.link/3662906.iIbC2pHGDl@rjwysocki.net
|
|
Since pm_runtime_force_resume() and pm_runtime_need_not_resume() are only
needed for handling system-wide PM transitions, there is no reason to
compile them in if CONFIG_PM_SLEEP is unset.
Accordingly, move them under CONFIG_PM_SLEEP and make the static
inline stub for pm_runtime_force_resume() return an error to indicate
that it should not be used outside CONFIG_PM_SLEEP.
Putting pm_runtime_force_resume() also allows subsequent changes to
be more straightforward because this function is going to access a
device PM flag that is only defined when CONFIG_PM_SLEEP is set.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://patch.msgid.link/3384523.aeNJFYEL58@rjwysocki.net
|
|
Since power.needs_force_resume is a bool field, use true/false
as its values instead of 1/0, respectively.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://patch.msgid.link/2254988.irdbgypaU6@rjwysocki.net
|
|
Avoid starting "async" suspend processing upfront for devices that have
consumers and start "async" suspend processing for a device's suppliers
right after suspending the device itself.
Suggested-by: Saravana Kannan <saravanak@google.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://patch.msgid.link/3384525.44csPzL39Z@rjwysocki.net
|
