| Age | Commit message (Collapse) | Author |
|---|
|
There is a spelling mistake in a dev_warn message. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://patch.msgid.link/20260424112425.32129-1-colin.i.king@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap fixes from Mark Brown:
"There's couple of patches here that came in since my pull request:
- What is effectively a quirk for shoehorning support for a wider
range of I2C regmaps on weirdly restricted SMBus controllers
- One minor fix for a memory leak on in error handling in the dummy
driver used by the KUnit tests"
* tag 'regmap-fix-v7.1-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: ram: fix memory leaks in __regmap_init_ram() on error
regmap-i2c: add SMBus byte/word reg16 bus for adapters lacking I2C_FUNC_I2C
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Here are the rest of small updates for 7.1-rc1. All small fixes mostly
for device-specific issues or regressions.
Core:
- Fix a potential data race in fasync handling
USB-audio:
- New device support: Line6 POD HD PRO, NexiGo N930W webcam
- Fixes for Audio Advantage Micro II SPDIF switch and E-MU sample
rates
- Limit UAC2 rate parsing to prevent potential overflows
HD-Audio:
- Device-specific quirks for HP, Acer, and Honor laptops
- Fix for TAS2781 SPI device abnormal sound
- Move Intel firmware loading into probe work to avoid stalling
ASoC:
- New support for TI TAS5832
- Fixes for SoundWire SDCA/DisCo boolean parsing
- Driver-specific fixes for Intel SOF, ES8311, RT1320, and PXA2xx
Misc:
- Fixes for resource leaks and data races in 6fire, caiaq, als4000,
and pcmtest drivers"
* tag 'sound-fix-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (41 commits)
Revert "ALSA: pcmtest: fix reference leak on failed device registration"
ASoC: tas2781: Add tas5832 support
ASoC: dt-bindings: ti,tas2781: Add TAS5832 support
ALSA: usb-audio: Fix Audio Advantage Micro II SPDIF switch
ALSA: usb-audio: Avoid false E-MU sample-rate notifications
ASoC: sdw_utils: cs42l43: allow spk component names to be combined
ASoC: qcom: x1e80100: limit speaker volumes
ALSA: hda/realtek - Add mute LED support for HP Victus 15-fa2xxx
ALSA: pcmtest: Fix resource leaks in module init error paths
ALSA: usb-audio/line6: Add support for POD HD PRO
ALSA: hda/realtek: Add LED fixup for HP EliteBook 6 G2a Laptops
ASoC: SDCA: Fix reading of mipi-sdca-control-deferrable
regmap: sdw-mbq: Allow defers on undeferrable controls
Revert "ALSA: usb-audio: Add quirk for SmartlinkTechnology M01"
ALSA: als4000: Fix capture trigger chip->mode race
ALSA: core: Fix potential data race at fasync handling
ALSA: hda/tas2781: Fix sound abnormal issue on some SPI device
ALSA: hda/realtek: add quirk for Acer Nitro 16 AN16-41
ALSA: caiaq: Fix control_put() result and cache rollback
ALSA: pcmtest: fix reference leak on failed device registration
...
|
|
It is a fairly common DisCo issue to have the deferrability of controls
marked incorrectly and Windows seems very permissive in this regard. As
there isn't really any down side to trying a defer even if the control
isn't deferrable, allow this but add a warning message.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20260413124621.1345315-2-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Two allocations in __regmap_init_ram() are not cleaned up on failure.
If the kzalloc_objs() for data->written fails, data->read is returned
with no way for the caller to free it.
If __regmap_init() fails, neither data->read nor data->written is freed
because its error paths do not call bus->free_context() (which is
regmap_ram_free_context() here). Only regmap_exit() does, and that is
never reached on an init failure.
Free the allocated arrays before returning any error.
Fixes: f6352424e37e ("regmap: Add RAM backed register map")
Signed-off-by: Yuho Choi <dbgh9129@gmail.com>
Link: https://patch.msgid.link/20260416235630.78408-1-dbgh9129@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap updates from Mark Brown:
"This has been quite a busy release for regmap, the user visible
changes are quite minor but there's some quite good work on internal
code improvements:
- Cleanup helper for __free()ing regmap_fields
- Support non-devm I3C regmaps
- A bunch of cleanup work, mostly from Andy Shevchenko
- Fix for bootstrapping issues with hardware initialised regmaps,
which was the main inspiration for some of the cleanups"
* tag 'regmap-v7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: i3c: Add non-devm regmap_init_i3c() helper
regmap: debugfs: fix race condition in dummy name allocation
regmap: Synchronize cache for the page selector
regmap: Simplify devres handling
regcache: Move HW readback after cache initialisation
regcache: Allocate and free reg_defaults on the same level
regcache: Move count check and cache_bypass assignment to the caller
regcache: Factor out regcache_hw_exit() helper
regcache: Amend printf() specifiers when printing registers
regcache: Define iterator inside for-loop and align their types
regmap: define cleanup helper for regmap_field
regmap: sort header includes
regcache: Split regcache_count_cacheable_registers() helper
regcache: Remove duplicate check in regcache_hw_init()
|
|
AMD PIIX4 SMBus adapters, present on AMD SP5/EPYC-based platforms
(including Cisco 8000 series routers), support SMBUS_BYTE_DATA and
SMBUS_WORD_DATA but lack I2C_FUNC_I2C and I2C_FUNC_SMBUS_I2C_BLOCK.
When at24 (or any driver) requests a regmap with reg_bits=16 and
val_bits=8 on such an adapter, regmap_get_i2c_bus() finds no matching
bus and returns -ENOTSUPP. The existing regmap_i2c_smbus_i2c_block_reg16
bus type already implements 16-bit addressed reads using only
write_byte_data() + read_byte() primitives, but its selection is gated
on I2C_FUNC_SMBUS_I2C_BLOCK which these adapters lack.
Add a new regmap_smbus_byte_word_reg16 bus that:
READ: reuses regmap_i2c_smbus_i2c_read_reg16() -- sets the 16-bit
address via write_byte_data(addr_lo, addr_hi), then reads
bytes sequentially via read_byte() (EEPROM auto-increments).
Requires only SMBUS_BYTE_DATA.
WRITE: uses write_word_data(addr_hi, (data << 8) | addr_lo) to
encode one data byte per SMBus WORD transaction.
Requires only SMBUS_WORD_DATA. Single-byte writes only.
The new bus is selected in regmap_get_i2c_bus() when reg_bits=16,
val_bits=8, and the adapter has SMBUS_BYTE_DATA | SMBUS_WORD_DATA but
not I2C_FUNC_I2C or SMBUS_I2C_BLOCK. The branch is placed after the
existing I2C_BLOCK_reg16 check so adapters with full block support
continue to use the faster path.
This fixes at24 EEPROM probe failures on PIIX4:
at24 3-0055: probe with driver at24 failed with error -524
No driver changes are required -- at24 already passes reg_bits=16 to
devm_regmap_init_i2c(), which now succeeds.
Signed-off-by: Nishanth Sampath Kumar <nissampa@cisco.com>
Link: https://patch.msgid.link/20260407233927.498932-1-nissampa@cisco.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add __regmap_init_i3c() and the corresponding regmap_init_i3c() macro to
allow creating a regmap for I3C devices without using the device-managed
version. This mirrors the pattern already established for other buses
such as I2C, SPI and so on, giving drivers more flexibility when
the regmap lifetime is not directly tied to the device.
Signed-off-by: Pei Xiao <xiaopei01@kylinos.cn>
Link: https://patch.msgid.link/a81256a8866b163979a20406abf01df7d7440104.1775788105.git.xiaopei01@kylinos.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Use IDA instead of a simple counter for generating unique dummy names.
The previous implementation used dummy_index++ which is not atomic,
leading to potential duplicate names when multiple threads call
regmap_debugfs_init() concurrently with name="dummy".
Signed-off-by: Zxyan Zhu <zxyan0222@gmail.com>
Link: https://patch.msgid.link/20260409035015.950764-1-zxyan0222@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Cross-merge networking fixes after downstream PR (net-7.0-rc7).
Conflicts:
net/vmw_vsock/af_vsock.c
b18c83388874 ("vsock: initialize child_ns_mode_locked in vsock_net_init()")
0de607dc4fd8 ("vsock: add G2H fallback for CIDs not owned by H2G transport")
Adjacent changes:
drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c
ceee35e5674a ("bnxt_en: Refactor some basic ring setup and adjustment logic")
57cdfe0dc70b ("bnxt_en: Resize RSS contexts on channel count change")
drivers/net/wireless/intel/iwlwifi/mld/mac80211.c
4d56037a02bd ("wifi: iwlwifi: mld: block EMLSR during TDLS connections")
687a95d204e7 ("wifi: iwlwifi: mld: correctly set wifi generation data")
drivers/net/wireless/intel/iwlwifi/mld/scan.h
b6045c899e37 ("wifi: iwlwifi: mld: Refactor scan command handling")
ec66ec6a5a8f ("wifi: iwlwifi: mld: Fix MLO scan timing")
drivers/net/wireless/intel/iwlwifi/mvm/fw.c
078df640ef05 ("wifi: iwlwifi: mld: add support for iwl_mcc_allowed_ap_type_cmd v
2")
323156c3541e ("wifi: iwlwifi: mvm: don't send a 6E related command when not supported")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
MDIO-based regmap is the last user of config symbol MDIO_BUS.
MDIO access needs a MII bus, which requires PHYLIB for the provider part.
Therefore make REGMAP_MDIO depend on PHYLIB, what allows to remove
config symbol MDIO_BUS in a follow-up patch.
Note: After c5a219395b4e ("regmap: Move selecting for REGMAP_MDIO and
REGMAP_IRQ") switching to "depends on" should be fine, w/o risk
of a circular dependency.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://patch.msgid.link/a21a3b3e-272e-4c61-986e-48a2cb3421d9@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If the selector register is represented in each page, its value
according to the debugfs is stale because it gets synchronized
only after the real page switch happens. Hence the regmap cache
initialisation from the HW inherits outdated data in the selector
register.
Synchronize cache for the page selector just in time.
Before (offset followed by hexdump, the first byte is selector):
// Real registers
18: 05 ff 00 00 ff 0f 00 00 f0 00 00 00
...
// Virtual (per port)
40: 05 ff 00 00 e0 e0 00 00 00 00 00 1f
50: 00 ff 00 00 e0 e0 00 00 00 00 00 1f
60: 01 ff 00 00 ff ff 00 00 00 00 00 00
70: 02 ff 00 00 cf f3 00 00 00 00 00 0c
80: 03 ff 00 00 00 00 00 00 00 00 00 ff
90: 04 ff 00 00 ff 0f 00 00 f0 00 00 00
After:
// Real registers
18: 05 ff 00 00 ff 0f 00 00 f0 00 00 00
...
// Virtual (per port)
40: 00 ff 00 00 e0 e0 00 00 00 00 00 1f
50: 01 ff 00 00 e0 e0 00 00 00 00 00 1f
60: 02 ff 00 00 ff ff 00 00 00 00 00 00
70: 03 ff 00 00 cf f3 00 00 00 00 00 0c
80: 04 ff 00 00 00 00 00 00 00 00 00 ff
90: 05 ff 00 00 ff 0f 00 00 f0 00 00 00
Fixes: 6863ca622759 ("regmap: Add support for register indirect addressing.")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20260302184753.2693803-1-andriy.shevchenko@linux.intel.com
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
If the selector register is represented in each page, its value
according to the debugfs is stale because it gets synchronized
only after the real page switch happens. Hence the regmap cache
initialisation from the HW inherits outdated data in the selector
register.
Synchronize cache for the page selector just in time.
Before (offset followed by hexdump, the first byte is selector):
// Real registers
18: 05 ff 00 00 ff 0f 00 00 f0 00 00 00
...
// Virtual (per port)
40: 05 ff 00 00 e0 e0 00 00 00 00 00 1f
50: 00 ff 00 00 e0 e0 00 00 00 00 00 1f
60: 01 ff 00 00 ff ff 00 00 00 00 00 00
70: 02 ff 00 00 cf f3 00 00 00 00 00 0c
80: 03 ff 00 00 00 00 00 00 00 00 00 ff
90: 04 ff 00 00 ff 0f 00 00 f0 00 00 00
After:
// Real registers
18: 05 ff 00 00 ff 0f 00 00 f0 00 00 00
...
// Virtual (per port)
40: 00 ff 00 00 e0 e0 00 00 00 00 00 1f
50: 01 ff 00 00 e0 e0 00 00 00 00 00 1f
60: 02 ff 00 00 ff ff 00 00 00 00 00 00
70: 03 ff 00 00 cf f3 00 00 00 00 00 0c
80: 04 ff 00 00 00 00 00 00 00 00 00 ff
90: 05 ff 00 00 ff 0f 00 00 f0 00 00 00
Fixes: 6863ca622759 ("regmap: Add support for register indirect addressing.")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20260302184753.2693803-1-andriy.shevchenko@linux.intel.com
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The resource-managed devm_regmap_init() can be a bit simpler by using
devm_add_action_or_reset() instead of devres_alloc(). This allows to
drop the less-obvious pointer to pointer (struct regmap **ptr) and make
devm_regmap_release() interface simpler.
Code is functionally equivalent with minor difference: devres_alloc()
will happen now after successful resource init (__regmap_init()).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260305201349.32734-2-krzysztof.kozlowski@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Make sure that cache is initialised before calling any IO
using regmap, this makes sure that we won't access NULL or
invalid pointers in the cache which hasn't been initialised.
As a side effect it also makes the ordering of cleaning up
the resources in regcache_exit() to be the same (and correct)
as in the error path of regcache_init(). This is not a problem
right now as they do not have dependencies, but it makes code
robust against potential changes in the future.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20260305085449.3184020-4-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Currently reg_defaults buffer may be allocated on two different
levels when the user provided them and we duplicate it in regcache_init()
or when user wants us to read back from HW in regcache_hw_init().
This inconsistency makes code harder to follow and maintain. Allocate
and free reg_defaults on the same level in regcache_init() to improve
the readability and maintenance efforts.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20260305085449.3184020-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Make regcache_count_cacheable_registers() just a counting routine
without any side effects by moving count check and cache_bypass
assignment to the caller.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20260305085449.3184020-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Factor out regcache_hw_exit() helper to make error and exit paths
clearer. This helps to avoid missing changes in case the code gets
shuffled in the future.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20260303092820.2818138-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
In one case the 0x is provided in the formatting string, while
the rest use # for that.
In a couple of more cases a decimal signed value specifier is used.
Amend them to use %#x when register is printed. Note, for the case,
when it's related to the read/write, use %x to be in align with
the similar messages in regmap core.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20260302095847.2310066-4-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Some of the iterators may be defined inside the respective for-loop
reducing the scope and potential risk of their misuse. While at it,
align their types based on the type of the upper or lower limits.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20260302095847.2310066-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The introduced helper allows to check for the non-cacheable configurations
earlier during initialisation.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20260210161058.53093-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The regcache_hw_init() is never called without preliminary check
for num_reg_defaults_raw not being 0. Thus, remove duplicate in
the function.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20260210161058.53093-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
Merge series from "Sheetal ." <sheetal@nvidia.com>:
This series adds a reg_default_cb callback for REGCACHE_FLAT to provide
defaults for registers not listed in reg_defaults. Defaults are loaded
eagerly during regcache init and the callback can use writeable_reg to
filter valid addresses and avoid holes.
|
|
Since commit 632e04739c8f ("clk: rs9: Fix suspend/resume"), the
clk-renesas-pcie-9series driver produces the following print in
kernel log on boot:
"
clk-renesas-pcie-9series 8-0068: No cache defaults, reading back from HW
"
This is caused by the presence of .num_reg_defaults_raw in its struct
regmap_config, without a matching .reg_defaults_raw table of built-in
register default values.
This configuration is valid, and causes the regcache code to read the
default register settings from the hardware, which is a valid behavior
for this particular chip. In fact, this configuration is more common
than configuration with .reg_defaults_raw built-in register defaults.
Do not warn about the read of default values being read from hardware,
as that is too strong and seems unnecessary, turn the warning into a
debug print.
Suggested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Link: https://patch.msgid.link/20260121234309.178391-1-marek.vasut+renesas@mailbox.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add a flat-cache KUnit test that verifies reg_defaults are honored while
missing entries are populated via the reg_default_cb callback without
hardware reads. This exercises the new callback path added for
REGCACHE_FLAT defaults.
Test: ./tools/testing/kunit/kunit.py run regmap
Result:
======== reg_default_callback_populates_flat_cache ========
[PASSED] flat-default @0x0
[PASSED] flat-default fast I/O @0x0
[PASSED] flat-default @0x2001
==== [PASSED] reg_default_callback_populates_flat_cache ====
Signed-off-by: Sheetal <sheetal@nvidia.com>
Link: https://patch.msgid.link/20260123095346.1258556-5-sheetal@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Commit e062bdfdd6ad ("regmap: warn users about uninitialized flat cache")
warns when REGCACHE_FLAT is used without full defaults. This causes
false positives on hardware where many registers reset to zero but are
not listed in reg_defaults, forcing drivers to maintain large tables
just to silence the warning.
Add a reg_default_cb() hook so drivers can supply defaults for registers
not present in reg_defaults when populating REGCACHE_FLAT. This keeps
the warning quiet for known zero-reset registers without bloating
tables. Provide a generic regmap_default_zero_cb() helper for drivers
that need zero defaults.
The hook is only used for REGCACHE_FLAT; the core does not
check readable/writeable access, so drivers must provide readable_reg/
writeable_reg callbacks and handle holes in the register map.
Signed-off-by: Sheetal <sheetal@nvidia.com>
Link: https://patch.msgid.link/20260123095346.1258556-3-sheetal@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Invisible symbol REGMAP defaults to y when any of the REGMAP_* symbols
is enabled, effectively auto-enabling it when needed. However,
REGMAP_SLIMBUS is missing from the list.
Currently this does not cause any issues, as all symbols selecting
REGMAP_SLIMBUS also select REGMAP and/or REGMAP_IRQ. Add REGMAP_SLIMBUS
to the list for consistency, and to prevent any future issues.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://patch.msgid.link/47872f8f4cf613e9710963bf871c6ac7b2ce81e8.1768494166.git.geert+renesas@glider.be
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Previously, the address of the shared member '&map->spinlock_flags' was
passed directly to 'hwspin_lock_timeout_irqsave'. This creates a race
condition where multiple contexts contending for the lock could overwrite
the shared flags variable, potentially corrupting the state for the
current lock owner.
Fix this by using a local stack variable 'flags' to store the IRQ state
temporarily.
Fixes: 8698b9364710 ("regmap: Add hardware spinlock support")
Signed-off-by: Cheng-Yu Lee <cylee12@realtek.com>
Co-developed-by: Yu-Chun Lin <eleanor.lin@realtek.com>
Signed-off-by: Yu-Chun Lin <eleanor.lin@realtek.com>
Link: https://patch.msgid.link/20260109032633.8732-1-eleanor.lin@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
regcache_maple_write() allocates a new block ('entry') to merge
adjacent ranges and then stores it with mas_store_gfp().
When mas_store_gfp() fails, the new 'entry' remains allocated and
is never freed, leaking memory.
Free 'entry' on the failure path; on success continue freeing the
replaced neighbor blocks ('lower', 'upper').
Signed-off-by: Kaushlendra Kumar <kaushlendra.kumar@intel.com>
Link: https://patch.msgid.link/20260105031820.260119-1-kaushlendra.kumar@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux
Pull i3c updates from Alexandre Belloni:
"HDR support has finally been added. mipi-i3c-hci has been reworked and
Intel Nova Lake-S support has been added.
Subsystem:
- Add HDR transfer support
Drivers:
- dw: fix bus hang on Agilex5
- mipi-i3c-hci: Intel Nova Lake-S support, IOMMU support
- svc: HDR support"
* tag 'i3c/for-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux: (28 commits)
regmap: i3c: switch to use i3c_xfer from i3c_priv_xfer
net: mctp i3c: switch to use i3c_xfer from i3c_priv_xfer
hwmon: (lm75): switch to use i3c_xfer from i3c_priv_xfer
i3c: document i3c_xfers
i3c: fix I3C_SDR bit number
i3c: master: svc: Add basic HDR mode support
i3c: master: svc: Replace bool rnw with union for HDR support
i3c: Switch to use new i3c_xfer from i3c_priv_xfer
i3c: Add HDR API support
i3c: master: add WQ_PERCPU to alloc_workqueue users
i3c: master: Remove i3c_device_free_ibi from i3c_device_remove
i3c: mipi-i3c-hci-pci: Set d3cold_delay to 0 for Intel controllers
i3c: mipi-i3c-hci-pci: Add LTR support for Intel controllers
i3c: mipi-i3c-hci-pci: Add exit callback
i3c: mipi-i3c-hci-pci: Change callback parameter
i3c: mipi-i3c-hci-pci: Allocate a structure for mipi_i3c_hci_pci device information
i3c: mipi-i3c-hci-pci: Factor out intel_reset()
i3c: mipi-i3c-hci-pci: Factor out private registers ioremapping
i3c: mipi-i3c-hci-pci: Constify driver data
i3c: mipi-i3c-hci-pci: Use readl_poll_timeout()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap updates from Mark Brown:
"Another small update for regmap, we have one new feature plus a little
bit of cleanup:
- Support for sparseness information in the flat cache, allowing
users that really need the performance properties it provides to
benefit from the interface and startup time improvements that
sparsness provides without needing to go all the way to a more
fancy data structure
- Cleanup work from Andy Shevchenko, refactoring the cache interface
in preparation for some future stuff he's working on"
* tag 'regmap-v6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: sdw-mbq: Reorder regmap_mbq_context struct for better packing
regmap: i3c: Use ARRAY_SIZE()
regcache: maple: Split ->populate() from ->init()
regcache: flat: Split ->populate() from ->init()
regcache: flat: Remove unneeded check and error message for -ENOMEM
regcache: rbtree: Split ->populate() from ->init()
regcache: Add ->populate() callback to separate from ->init()
regmap: warn users about uninitialized flat cache
regmap: add flat cache with sparse validity
|
|
Switch to use i3c_xfer instead of i3c_priv_xfer because framework will
update to support HDR mode. i3c_priv_xfer is now an alias of i3c_xfer.
Replace i3c_device_do_priv_xfers() with i3c_device_do_xfers(..., I3C_SDR)
to align with the new API.
Prepare for removal of i3c_priv_xfer and i3c_device_do_priv_xfers().
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://patch.msgid.link/20251028-lm75-v1-3-9bf88989c49c@nxp.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
Avoid a hole in struct regmap_mbq_context by shuffling the members
slightly. Pahole before:
struct regmap_mbq_context {
struct device * dev; /* 0 8 */
struct sdw_slave * sdw; /* 8 8 */
struct regmap_sdw_mbq_cfg cfg; /* 16 32 */
int val_size; /* 48 4 */
/* XXX 4 bytes hole, try to pack */
bool (*readable_reg)(struct device *, unsigned int); /* 56 8 */
/* size: 64, cachelines: 1, members: 5 */
/* sum members: 60, holes: 1, sum holes: 4 */
};
Pahole after:
struct regmap_mbq_context {
struct device * dev; /* 0 8 */
struct sdw_slave * sdw; /* 8 8 */
bool (*readable_reg)(struct device *, unsigned int); /* 16 8 */
struct regmap_sdw_mbq_cfg cfg; /* 24 32 */
int val_size; /* 56 4 */
/* size: 64, cachelines: 1, members: 5 */
/* padding: 4 */
};
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20251107104551.1553526-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Merge series from Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>:
This patchset has 4 fixes and some enhancements to the Elite DSP driver
support.
Fixes includes
- setting correct flags for expected behaviour of appl_ptr
- fix closing of copp instances
- fix buffer alignment.
- fix state checks before closing asm stream
Enhancements include:
- adding q6asm_get_hw_pointer and ack callback support
- simplify code via __free(kfree) mechanism.
- use spinlock guards
- few cleanups discovered during doing above 2.
There is another set of updates comming soon, which will add support
for early memory mapping and few more modules support in audioreach.
|
|
Use ARRAY_SIZE() instead of hard coded numbers to show the intention
and make code robust against potential changes.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patch.msgid.link/20251103180946.604127-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Split ->populate() implementation from ->init() code.
This decoupling will help for the further changes.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20251031080540.3970776-6-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Split ->populate() implementation from ->init() code.
This decoupling will help for the further changes.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20251031080540.3970776-5-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
There is a convention in the kernel to avoid error messages
in the cases of -ENOMEM errors. Besides that, the idea behind
using struct_size() and other macros from overflow.h is
to saturate the size that the following allocation call will
definitely fail, hence the check and the error messaging added
in regcache_flat_init() are redundant. Remove them.
Acked-by: Sander Vanheule <sander@svanheule.net>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20251031080540.3970776-4-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Split ->populate() implementation from ->init() code.
This decoupling will help for the further changes.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20251031080540.3970776-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
In the future changes we would like to change the flow of the cache handling.
Add ->populate() callback in order to prepare for that.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20251031080540.3970776-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The standard flat cache did not contain any validity info, so the cache
was always considered to be entirely valid. Multiple mechanisms exist to
initialize the cache on regmap init (defaults, raw defaults, HW init),
but not all drivers are using one of these. As a result, their
implementation might currently depend on the zero-initialized cache or
contain other workarounds.
When reading an uninitialized value from the flat cache, warn the user,
but maintain the current behavior. This will allow developers to switch
to a sparse (flat) cache independently.
Signed-off-by: Sander Vanheule <sander@svanheule.net>
Link: https://patch.msgid.link/20251029081248.52607-3-sander@svanheule.net
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The flat regcache will always assume the data in the cache is valid.
Since the cache is preferred over hardware access, this may shadow the
actual state of the device.
Add a new containing cache structure with the flat data table and a
bitmap indicating cache validity. REGCACHE_FLAT will still behave as
before, as the validity is ignored.
Define new cache type REGCACHE_FLAT_S: a flat cache with sparse
validity. The sparse validity is used to determine if a hardware access
should occur to initialize the cache on the fly, vs. at regmap init for
REGCACHE_FLAT. Contrary to REGCACHE_FLAT, this allows us to implement
regcache_ops.drop.
Signed-off-by: Sander Vanheule <sander@svanheule.net>
Link: https://patch.msgid.link/20251029081248.52607-2-sander@svanheule.net
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Currently, the code assumes that the device that registered the
MBQ register map is the actual SoundWire slave device. This works
fine for all current users, however future SDCA devices will
likely be implemented with the SoundWire slave as a parent device
and separate child drivers with regmaps for each audio Function.
Update the regmap_init_sdw_mbq_cfg macro to allow these two
to be specified separately.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20251020155512.353774-3-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Commit 4e65bda8273c ("ASoC: wcd934x: fix error handling in
wcd934x_codec_parse_data()") revealed the problem in the slimbus regmap.
That commit breaks audio playback, for instance, on sdm845 Thundercomm
Dragonboard 845c board:
Unable to handle kernel paging request at virtual address ffff8000847cbad4
...
CPU: 5 UID: 0 PID: 776 Comm: aplay Not tainted 6.18.0-rc1-00028-g7ea30958b305 #11 PREEMPT
Hardware name: Thundercomm Dragonboard 845c (DT)
...
Call trace:
slim_xfer_msg+0x24/0x1ac [slimbus] (P)
slim_read+0x48/0x74 [slimbus]
regmap_slimbus_read+0x18/0x24 [regmap_slimbus]
_regmap_raw_read+0xe8/0x174
_regmap_bus_read+0x44/0x80
_regmap_read+0x60/0xd8
_regmap_update_bits+0xf4/0x140
_regmap_select_page+0xa8/0x124
_regmap_raw_write_impl+0x3b8/0x65c
_regmap_bus_raw_write+0x60/0x80
_regmap_write+0x58/0xc0
regmap_write+0x4c/0x80
wcd934x_hw_params+0x494/0x8b8 [snd_soc_wcd934x]
snd_soc_dai_hw_params+0x3c/0x7c [snd_soc_core]
__soc_pcm_hw_params+0x22c/0x634 [snd_soc_core]
dpcm_be_dai_hw_params+0x1d4/0x38c [snd_soc_core]
dpcm_fe_dai_hw_params+0x9c/0x17c [snd_soc_core]
snd_pcm_hw_params+0x124/0x464 [snd_pcm]
snd_pcm_common_ioctl+0x110c/0x1820 [snd_pcm]
snd_pcm_ioctl+0x34/0x4c [snd_pcm]
__arm64_sys_ioctl+0xac/0x104
invoke_syscall+0x48/0x104
el0_svc_common.constprop.0+0x40/0xe0
do_el0_svc+0x1c/0x28
el0_svc+0x34/0xec
el0t_64_sync_handler+0xa0/0xf0
el0t_64_sync+0x198/0x19c
The __devm_regmap_init_slimbus() started to be used instead of
__regmap_init_slimbus() after the commit mentioned above and turns out
the incorrect bus_context pointer (3rd argument) was used in
__devm_regmap_init_slimbus(). It should be just "slimbus" (which is equal
to &slimbus->dev). Correct it. The wcd934x codec seems to be the only or
the first user of devm_regmap_init_slimbus() but we should fix it till
the point where __devm_regmap_init_slimbus() was introduced therefore
two "Fixes" tags.
While at this, also correct the same argument in __regmap_init_slimbus().
Fixes: 4e65bda8273c ("ASoC: wcd934x: fix error handling in wcd934x_codec_parse_data()")
Fixes: 7d6f7fb053ad ("regmap: add SLIMbus support")
Cc: stable@vger.kernel.org
Cc: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Cc: Ma Ke <make24@iscas.ac.cn>
Cc: Steev Klimaszewski <steev@kali.org>
Cc: Srinivas Kandagatla <srini@kernel.org>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Alexey Klimov <alexey.klimov@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://patch.msgid.link/20251022201013.1740211-1-alexey.klimov@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Change the 'ret' variable from unsigned int to int to store negative error
codes or zero returned by regmap_field_read() and regmap_read(), and change
'-1' to 'negative errno' in the comments.
Storing the negative error codes in unsigned type, doesn't cause an issue
at runtime but it's ugly as pants. Additionally, assigning negative error
codes to unsigned type may trigger a GCC warning when the -Wsign-conversion
flag is enabled.
No effect on runtime.
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Message-ID: <20250828150702.193288-1-rongqianfeng@vivo.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The first thing __regmap_init() do is check if config is non-NULL,
so there is no need to check for this again later.
Fixes: d77e745613680c54 ("regmap: Add bulk read/write callbacks into regmap_config")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/a154d9db0f290dda96b48bd817eb743773e846e1.1755090330.git.geert+renesas@glider.be
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
There were already several commits to add module descriptions to regmap
modules. But this one was still missing:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/base/regmap/regmap-mmio.o
Signed-off-by: Luis Henriques <luis@igalia.com>
Link: https://patch.msgid.link/20250728150829.11890-1-luis@igalia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap fixes from Mark Brown:
"These patches fix a lockdep issue Russell King reported with nested
regmap-irqs (unusual since regmap is generally for devices on slow
buses so devices don't get nested), plus add a missing mutex free
which I noticed while implementing a fix for that issue"
* tag 'regmap-fix-v6.17-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: irq: Avoid lockdep warnings with nested regmap-irq chips
regmap: irq: Free the regmap-irq mutex
|
