| Age | Commit message (Collapse) | Author |
|---|
|
Open code 'tpm_buf_append_hmac_session_opt' to the call site, as it only
masks a call sequence and does otherwise nothing particularly useful.
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@opinsys.com>
Reviewed-by: Jonathan McDowell <noodles@meta.com>
|
|
Remove 'attributes' parameter from 'tpm_buf_append_auth', as it is not used
by the function.
Fixes: 27184f8905ba ("tpm: Opt-in in disable PCR integrity protection")
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@opinsys.com>
Reviewed-by: Jonathan McDowell <noodles@meta.com>
|
|
tpm2_read_public() has some rudimentary range checks but the function does
not ensure that the response buffer has enough bytes for the full TPMT_HA
payload.
Re-implement the function with necessary checks and validation, and return
name and name size for all handle types back to the caller.
Cc: stable@vger.kernel.org # v6.10+
Fixes: d0a25bb961e6 ("tpm: Add HMAC session name/handle append")
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Reviewed-by: Jonathan McDowell <noodles@meta.com>
|
|
'name_size' does not have any range checks, and it just directly indexes
with TPM_ALG_ID, which could lead into memory corruption at worst.
Address the issue by only processing known values and returning -EINVAL for
unrecognized values.
Make also 'tpm_buf_append_name' and 'tpm_buf_fill_hmac_session' fallible so
that errors are detected before causing any spurious TPM traffic.
End also the authorization session on failure in both of the functions, as
the session state would be then by definition corrupted.
Cc: stable@vger.kernel.org # v6.10+
Fixes: 1085b8276bb4 ("tpm: Add the rest of the session HMAC API")
Reviewed-by: Jonathan McDowell <noodles@meta.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
tpm2_get_pcr_allocation() does not cap any upper limit for the number of
banks. Cap the limit to eight banks so that out of bounds values coming
from external I/O cause on only limited harm.
Cc: stable@vger.kernel.org # v5.10+
Fixes: bcfff8384f6c ("tpm: dynamically allocate the allocated_banks array")
Tested-by: Lai Yi <yi1.lai@linux.intel.com>
Reviewed-by: Jonathan McDowell <noodles@meta.com>
Reviewed-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@opinsys.com>
|
|
tpm_find_get_ops() looks for the first valid TPM if the caller passes in
NULL. All internal users have been converted to either associate
themselves with a TPM directly, or call tpm_default_chip() as part of
their setup. Remove the no longer necessary tpm_find_get_ops().
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jonathan McDowell <noodles@meta.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
Currently if a user enqueues a work item using schedule_delayed_work() the
used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to
schedule_work() that is using system_wq and queue_work(), that makes use
again of WORK_CPU_UNBOUND.
This lack of consistency cannot be addressed without refactoring the API.
alloc_workqueue() treats all queues as per-CPU by default, while unbound
workqueues must opt-in via WQ_UNBOUND.
This default is suboptimal: most workloads benefit from unbound queues,
allowing the scheduler to place worker threads where they’re needed and
reducing noise when CPUs are isolated.
This continues the effort to refactor workqueue APIs, which began with
the introduction of new workqueues and a new alloc_workqueue flag in:
commit 128ea9f6ccfb ("workqueue: Add system_percpu_wq and system_dfl_wq")
commit 930c2ea566af ("workqueue: Add new WQ_PERCPU flag")
This change adds a new WQ_PERCPU flag to explicitly request
alloc_workqueue() to be per-cpu when WQ_UNBOUND has not been specified.
With the introduction of the WQ_PERCPU flag (equivalent to !WQ_UNBOUND),
any alloc_workqueue() caller that doesn’t explicitly specify WQ_UNBOUND
must now use WQ_PERCPU.
Once migration is complete, WQ_UNBOUND can be removed and unbound will
become the implicit default.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
Update the kerneldoc parameter definitions for __crb_go_idle
and __crb_cmd_ready to include the loc parameter.
Signed-off-by: Stuart Yoder <stuart.yoder@arm.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
The spelling of the word "requrest" is incorrect; it should be "request".
Signed-off-by: Chu Guangqing <chuguangqing@inspur.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
'trusted_tpm2' duplicates 'tpm2_hash_map' originally part of the TPN
driver, which is suboptimal.
Implement and export `tpm2_find_hash_alg()` in the driver, and substitute
the redundant code in 'trusted_tpm2' with a call to the new function.
Reviewed-by: Jonathan McDowell <noodles@meta.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
According to the CRB over FF-A specification [1], a TPM that implements
the ABI must comply with the TCG PTP specification. This requires support
for the Idle and Ready states.
This patch implements CRB control area requests for goIdle and
cmdReady on FF-A based TPMs.
The FF-A message used to notify the TPM of CRB updates includes a
locality parameter, which provides a hint to the TPM about which
locality modified the CRB. This patch adds a locality parameter
to __crb_go_idle() and __crb_cmd_ready() to support this.
[1] https://developer.arm.com/documentation/den0138/latest/
Signed-off-by: Stuart Yoder <stuart.yoder@arm.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
Reads on tpm/tpm0/ppi/*operations can become very long on
misconfigured systems. Reading the TPM is a blocking operation,
thus a user could effectively trigger a DOS.
Resolve this by caching the results and avoiding the blocking
operations after the first read.
[ jarkko: fixed atomic sleep:
sed -i 's/spin_/mutex_/g' drivers/char/tpm/tpm_ppi.c
sed -i 's/DEFINE_SPINLOCK/DEFINE_MUTEX/g' drivers/char/tpm/tpm_ppi.c ]
Signed-off-by: Denis Aleksandrov <daleksan@redhat.com>
Reported-by: Jan Stancek <jstancek@redhat.com>
Closes: https://lore.kernel.org/linux-integrity/20250915210829.6661-1-daleksan@redhat.com/T/#u
Suggested-by: Jarkko Sakkinen <jarkko@kernel.org>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
The current shenanigans for duration calculation introduce too much
complexity for a trivial problem, and further the code is hard to patch and
maintain.
Address these issues with a flat look-up table, which is easy to understand
and patch. If leaf driver specific patching is required in future, it is
easy enough to make a copy of this table during driver initialization and
add the chip parameter back.
'chip->duration' is retained for TPM 1.x.
As the first entry for this new behavior address TCG spec update mentioned
in this issue:
https://github.com/raspberrypi/linux/issues/7054
Therefore, for TPM_SelfTest the duration is set to 3000 ms.
This does not categorize a as bug, given that this is introduced to the
spec after the feature was originally made.
Reviewed-by: Serge Hallyn <serge@hallyn.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
The tpm_tis_write8() call specifies arguments in wrong order. Should be
(data, addr, value) not (data, value, addr). The initial correct order
was changed during the major refactoring when the code was split.
Fixes: 41a5e1cf1fe1 ("tpm/tpm_tis: Split tpm_tis driver into a core and TCG TIS compliant phy")
Signed-off-by: Gunnar Kudrjavets <gunnarku@amazon.com>
Reviewed-by: Justinien Bouron <jbouron@amazon.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
Now that there are easy-to-use HMAC-SHA256 library functions, use these
in tpm2-sessions.c instead of open-coding the HMAC algorithm.
Note that the new implementation correctly handles keys longer than 64
bytes (SHA256_BLOCK_SIZE), whereas the old implementation handled such
keys incorrectly. But it doesn't appear that such keys were being used.
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
In tpm_buf_check_hmac_response(), compare the HMAC values in constant
time using crypto_memneq() instead of in variable time using memcmp().
This is worthwhile to follow best practices and to be consistent with
MAC comparisons elsewhere in the kernel. However, in this driver the
side channel seems to have been benign: the HMAC input data is
guaranteed to always be unique, which makes the usual MAC forgery via
timing side channel not possible. Specifically, the HMAC input data in
tpm_buf_check_hmac_response() includes the "our_nonce" field, which was
generated by the kernel earlier, remains under the control of the
kernel, and is unique for each call to tpm_buf_check_hmac_response().
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
After reading all the feedback, right now disabling the TPM2_TCG_HMAC
is the right call.
Other views discussed:
A. Having a kernel command-line parameter or refining the feature
otherwise. This goes to the area of improvements. E.g., one
example is my own idea where the null key specific code would be
replaced with a persistent handle parameter (which can be
*unambigously* defined as part of attestation process when
done correctly).
B. Removing the code. I don't buy this because that is same as saying
that HMAC encryption cannot work at all (if really nitpicking) in
any form. Also I disagree on the view that the feature could not
be refined to something more reasoable.
Also, both A and B are worst options in terms of backporting.
Thuss, this is the best possible choice.
Cc: stable@vger.kernel.or # v6.10+
Fixes: d2add27cf2b8 ("tpm: Add NULL primary creation")
Suggested-by: Chris Fenner <cfenn@google.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
Commit 5c83b07df9c5 ("tpm: Add a driver for Loongson TPM device") has a
semantic conflict with commit 07d8004d6fb9 ("tpm: add bufsiz parameter
in the .send callback"), as the former change was developed against a
tree without the latter change. This results in a build error:
drivers/char/tpm/tpm_loongson.c:48:17: error: initialization of 'int (*)(struct tpm_chip *, u8 *, size_t, size_t)' {aka 'int (*)(struct tpm_chip *, unsigned char *, long unsigned int, long unsigned int)'} from incompatible pointer type 'int (*)(struct tpm_chip *, u8 *, size_t)' {aka 'int (*)(struct tpm_chip *, unsigned char *, long unsigned int)'} [-Wincompatible-pointer-types]
48 | .send = tpm_loongson_send,
| ^~~~~~~~~~~~~~~~~
drivers/char/tpm/tpm_loongson.c:48:17: note: (near initialization for 'tpm_loongson_ops.send')
drivers/char/tpm/tpm_loongson.c:31:12: note: 'tpm_loongson_send' declared here
31 | static int tpm_loongson_send(struct tpm_chip *chip, u8 *buf, size_t count)
| ^~~~~~~~~~~~~~~~~
Add the expected bufsiz parameter to tpm_loongson_send() to resolve the
error.
Fixes: 5c83b07df9c5 ("tpm: Add a driver for Loongson TPM device")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Loongson Security Engine supports random number generation, hash,
symmetric encryption and asymmetric encryption. Based on these
encryption functions, TPM2 have been implemented in the Loongson
Security Engine firmware. This driver is responsible for copying data
into the memory visible to the firmware and receiving data from the
firmware.
Co-developed-by: Yinggang Gu <guyinggang@loongson.cn>
Signed-off-by: Yinggang Gu <guyinggang@loongson.cn>
Signed-off-by: Qunqin Zhao <zhaoqunqin@loongson.cn>
Reviewed-by: Huacai Chen <chenhuacai@loongson.cn>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Link: https://lore.kernel.org/r/20250705072045.1067-4-zhaoqunqin@loongson.cn
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd
Pull tpm updates from Jarkko Sakkinen:
"Quite a few commits but nothing really that would be worth of spending
too much time for, or would want to emphasize in particular"
* tag 'tpmdd-next-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
tpm_crb_ffa: handle tpm busy return code
tpm_crb_ffa: Remove memset usage
tpm_crb_ffa: Fix typos in function name
tpm: Check for completion after timeout
tpm: Use of_reserved_mem_region_to_resource() for "memory-region"
tpm: Replace scnprintf() with sysfs_emit() and sysfs_emit_at() in sysfs show functions
tpm_crb_ffa: Remove unused export
tpm: tpm_crb_ffa: try to probe tpm_crb_ffa when it's built-in
firmware: arm_ffa: Change initcall level of ffa_init() to rootfs_initcall
tpm/tpm_svsm: support TPM_CHIP_FLAG_SYNC
tpm/tpm_ftpm_tee: support TPM_CHIP_FLAG_SYNC
tpm: support devices with synchronous send()
tpm: add bufsiz parameter in the .send callback
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux
Pull crypto library updates from Eric Biggers:
"This is the main crypto library pull request for 6.17. The main focus
this cycle is on reorganizing the SHA-1 and SHA-2 code, providing
high-quality library APIs for SHA-1 and SHA-2 including HMAC support,
and establishing conventions for lib/crypto/ going forward:
- Migrate the SHA-1 and SHA-512 code (and also SHA-384 which shares
most of the SHA-512 code) into lib/crypto/. This includes both the
generic and architecture-optimized code. Greatly simplify how the
architecture-optimized code is integrated. Add an easy-to-use
library API for each SHA variant, including HMAC support. Finally,
reimplement the crypto_shash support on top of the library API.
- Apply the same reorganization to the SHA-256 code (and also SHA-224
which shares most of the SHA-256 code). This is a somewhat smaller
change, due to my earlier work on SHA-256. But this brings in all
the same additional improvements that I made for SHA-1 and SHA-512.
There are also some smaller changes:
- Move the architecture-optimized ChaCha, Poly1305, and BLAKE2s code
from arch/$(SRCARCH)/lib/crypto/ to lib/crypto/$(SRCARCH)/. For
these algorithms it's just a move, not a full reorganization yet.
- Fix the MIPS chacha-core.S to build with the clang assembler.
- Fix the Poly1305 functions to work in all contexts.
- Fix a performance regression in the x86_64 Poly1305 code.
- Clean up the x86_64 SHA-NI optimized SHA-1 assembly code.
Note that since the new organization of the SHA code is much simpler,
the diffstat of this pull request is negative, despite the addition of
new fully-documented library APIs for multiple SHA and HMAC-SHA
variants.
These APIs will allow further simplifications across the kernel as
users start using them instead of the old-school crypto API. (I've
already written a lot of such conversion patches, removing over 1000
more lines of code. But most of those will target 6.18 or later)"
* tag 'libcrypto-updates-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux: (67 commits)
lib/crypto: arm64/sha512-ce: Drop compatibility macros for older binutils
lib/crypto: x86/sha1-ni: Convert to use rounds macros
lib/crypto: x86/sha1-ni: Minor optimizations and cleanup
crypto: sha1 - Remove sha1_base.h
lib/crypto: x86/sha1: Migrate optimized code into library
lib/crypto: sparc/sha1: Migrate optimized code into library
lib/crypto: s390/sha1: Migrate optimized code into library
lib/crypto: powerpc/sha1: Migrate optimized code into library
lib/crypto: mips/sha1: Migrate optimized code into library
lib/crypto: arm64/sha1: Migrate optimized code into library
lib/crypto: arm/sha1: Migrate optimized code into library
crypto: sha1 - Use same state format as legacy drivers
crypto: sha1 - Wrap library and add HMAC support
lib/crypto: sha1: Add HMAC support
lib/crypto: sha1: Add SHA-1 library functions
lib/crypto: sha1: Rename sha1_init() to sha1_init_raw()
crypto: x86/sha1 - Rename conflicting symbol
lib/crypto: sha2: Add hmac_sha*_init_usingrawkey()
lib/crypto: arm/poly1305: Remove unneeded empty weak function
lib/crypto: x86/poly1305: Fix performance regression on short messages
...
|
|
Platforms supporting direct message request v2 [1] can support secure
partitions that support multiple services. For CRB over FF-A interface,
if the firmware TPM or TPM service [1] shares its Secure Partition (SP)
with another service, message requests may fail with a -EBUSY error.
To handle this, replace the single check and call with a retry loop
that attempts the TPM message send operation until it succeeds or a
configurable timeout is reached. Implement a _try_send_receive function
to do a single send/receive and modify the existing send_receive to
add this retry loop.
The retry mechanism introduces a module parameter (`busy_timeout_ms`,
default: 2000ms) to control how long to keep retrying on -EBUSY
responses. Between retries, the code waits briefly (50-100 microseconds)
to avoid busy-waiting and handling TPM BUSY conditions more gracefully.
The parameter can be modified at run-time as such:
echo 3000 | tee /sys/module/tpm_crb_ffa/parameters/busy_timeout_ms
This changes the timeout from the default 2000ms to 3000ms.
[1] TPM Service Command Response Buffer Interface Over FF-A
https://developer.arm.com/documentation/den0138/latest/
Signed-off-by: Prachotan Bathi <prachotan.bathi@arm.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
Simplify initialization of `ffa_send_direct_data2` and
`ffa_send_direct_data` structures by using designated initializers
instead of `memset()` followed by field assignments, reducing code size
and improving readability.
Signed-off-by: Prachotan Bathi <prachotan.bathi@arm.com>
Suggested-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
Rename *recieve as __tpm_crb_ffa_send_receive
[jarkko: polished commit message]
Signed-off-by: Prachotan Bathi <prachotan.bathi@arm.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
The current implementation of timeout detection works in the following
way:
1. Read completion status. If completed, return the data
2. Sleep for some time (usleep_range)
3. Check for timeout using current jiffies value. Return an error if
timed out
4. Goto 1
usleep_range doesn't guarantee it's always going to wake up strictly in
(min, max) range, so such a situation is possible:
1. Driver reads completion status. No completion yet
2. Process sleeps indefinitely. In the meantime, TPM responds
3. We check for timeout without checking for the completion again.
Result is lost.
Such a situation also happens for the guest VMs: if vCPU goes to sleep
and doesn't get scheduled for some time, the guest TPM driver will
timeout instantly after waking up without checking for the completion
(which may already be in place).
Perform the completion check once again after exiting the busy loop in
order to give the device the last chance to send us some data.
Since now we check for completion in two places, extract this check into
a separate function.
Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Reviewed-by: Jonathan McDowell <noodles@meta.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
Use the newly added of_reserved_mem_region_to_resource() function to
handle "memory-region" properties.
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
functions
Documentation/filesystems/sysfs.rst mentions that show() should only
use sysfs_emit() or sysfs_emit_at() when formating the value to be
returned to user space. So replace scnprintf() with sysfs_emit().
Signed-off-by: Chelsy Ratnawat <chelsyratnawat2001@gmail.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
Remove the export of tpm_crb_ffa_get_interface_version() as it has no
callers outside tpm_crb_ffa.
Fixes: eb93f0734ef1 ("tpm_crb: ffa_tpm: Implement driver compliant to CRB over FF-A")
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@opinsys.com>
Reviewed-by: Yeoreum Yun <yeoreum.yun@arm.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
To generate the boot_aggregate log in the IMA subsystem using TPM PCR
values, the TPM driver must be built as built-in and must be probed
before the IMA subsystem is initialized.
However, when the TPM device operates over the FF-A protocol using the
CRB interface, probing fails and returns -EPROBE_DEFER if the
tpm_crb_ffa device — an FF-A device that provides the communication
interface to the tpm_crb driver — has not yet been probed.
This issue occurs because both crb_acpi_driver_init() and
tpm_crb_ffa_driver_init() are registered with device_initcall. As a
result, crb_acpi_driver_init() may be invoked before
tpm_crb_ffa_driver_init(), which is responsible for probing the
tpm_crb_ffa device.
When this happens, IMA fails to detect the TPM device and logs the
following message:
| ima: No TPM chip found, activating TPM-bypass!
Consequently, it cannot generate the boot_aggregate log with the PCR
values provided by the TPM.
To resolve this issue, the tpm_crb_ffa_init() function explicitly
attempts to probe the tpm_crb_ffa by register tpm_crb_ffa driver so that
when tpm_crb_ffa device is created before tpm_crb_ffa_init(), probe the
tpm_crb_ffa device in tpm_crb_ffa_init() to finish probe the TPM device
completely.
This ensures that the TPM device using CRB over FF-A can be successfully
probed, even if crb_acpi_driver_init() is called first.
[ jarkko: reformatted some of the paragraphs because they were going past
the 75 character boundary. ]
Signed-off-by: Yeoreum Yun <yeoreum.yun@arm.com>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
This driver does not support interrupts, and receiving the response is
synchronous with sending the command.
Enable synchronous send() with TPM_CHIP_FLAG_SYNC, which implies that
->send() already fills the provided buffer with a response, and ->recv()
is not implemented.
Keep using the same pre-allocated buffer to avoid having to allocate
it for each command. We need the buffer to have the header required by
the SVSM protocol and the command contiguous in memory.
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
This driver does not support interrupts, and receiving the response is
synchronous with sending the command.
Enable synchronous send() with TPM_CHIP_FLAG_SYNC, which implies that
->send() already fills the provided buffer with a response, and ->recv()
is not implemented.
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
Some devices do not support interrupts and provide a single synchronous
operation to send the command and receive the response on the same buffer.
Currently, these types of drivers must use an internal buffer where they
temporarily store the response between .send() and .recv() calls.
Introduce a new flag (TPM_CHIP_FLAG_SYNC) to support synchronous send().
If that flag is set by the driver, tpm_try_transmit() will use the send()
callback to send the command and receive the response on the same buffer
synchronously. In that case send() return the number of bytes of the
response on success, or -errno on failure.
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Suggested-by: Jason Gunthorpe <jgg@ziepe.ca>
Suggested-by: Jarkko Sakkinen <jarkko@kernel.org>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
Add a new `bufsiz` parameter to the `.send` callback in `tpm_class_ops`.
This parameter will allow drivers to differentiate between the actual
command length to send and the total buffer size. Currently `bufsiz` is
not used, but it will be used to implement devices with synchronous send()
to send the command and receive the response on the same buffer.
Also rename the previous parameter `len` to `cmd_len` in the declaration
to make it clear that it contains the length in bytes of the command
stored in the buffer. The semantics don't change and it can be used as
before by drivers. This is an optimization since the drivers could get it
from the header, but let's avoid duplicating code.
While we are here, resolve a checkpatch warning:
WARNING: Unnecessary space before function pointer arguments
#66: FILE: include/linux/tpm.h:90:
+ int (*send) (struct tpm_chip *chip, u8 *buf, size_t bufsiz,
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Suggested-by: Jarkko Sakkinen <jarkko@kernel.org>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
Currently the SHA-224 and SHA-256 library functions can be mixed
arbitrarily, even in ways that are incorrect, for example using
sha224_init() and sha256_final(). This is because they operate on the
same structure, sha256_state.
Introduce stronger typing, as I did for SHA-384 and SHA-512.
Also as I did for SHA-384 and SHA-512, use the names *_ctx instead of
*_state. The *_ctx names have the following small benefits:
- They're shorter.
- They avoid an ambiguity with the compression function state.
- They're consistent with the well-known OpenSSL API.
- Users usually name the variable 'sctx' anyway, which suggests that
*_ctx would be the more natural name for the actual struct.
Therefore: update the SHA-224 and SHA-256 APIs, implementation, and
calling code accordingly.
In the new structs, also strongly-type the compression function state.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250630160645.3198-7-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
FWIW, there is a reliable indication of removal - ->i_nlink going to 0 ;-)
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Move this API to the canonical timer_*() namespace.
[ tglx: Redone against pre rc1 ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/aB2X0jCKQO56WdMt@gmail.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull AMD SEV update from Borislav Petkov:
"Add a virtual TPM driver glue which allows a guest kernel to talk to a
TPM device emulated by a Secure VM Service Module (SVSM) - a helper
module of sorts which runs at a different privilege level in the
SEV-SNP VM stack.
The intent being that a TPM device is emulated by a trusted entity and
not by the untrusted host which is the default assumption in the
confidential computing scenarios"
* tag 'x86_sev_for_v6.16_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/sev: Register tpm-svsm platform device
tpm: Add SNP SVSM vTPM driver
svsm: Add header with SVSM_VTPM_CMD helpers
x86/sev: Add SVSM vTPM probe/send_command functions
|
|
-Fix the comment describing the 'start' function, which was a cut/paste
mistake for a different function.
-The comment for DIRECT_REQ and DIRECT_RESP only mentioned AArch32
and listed 32-bit function IDs. Update to include 64-bit.
Signed-off-by: Stuart Yoder <stuart.yoder@arm.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
Instead of pr_xxx() macro, use dev_xxx() to print log.
This patch changes some error log level to warn log level when
the tpm_crb_ffa secure partition doesn't support properly but
system can run without it.
(i.e) unsupport of direct message ABI or unsupported ABI version
Signed-off-by: Yeoreum Yun <yeoreum.yun@arm.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
For secure partition with multi service, tpm_ffa_crb can access tpm
service with direct message request v2 interface according to chapter 3.3,
TPM Service Command Response Buffer Interface Over FF-A specificationi v1.0 BET.
This patch reflects this spec to access tpm service over
FF-A direct message request v2 ABI.
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Yeoreum Yun <yeoreum.yun@arm.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
The kmalloc failure message is just noise. Remove it and replace -EFAULT
with -ENOMEM as standard for out of memory allocation error returns.
Link: https://lore.kernel.org/linux-integrity/20250430083435.860146-1-colin.i.king@gmail.com/
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
With some Infineon chips the timeouts in tpm_tis_send_data (both B and
C) can reach up to about 2250 ms.
Timeout C is retried since
commit de9e33df7762 ("tpm, tpm_tis: Workaround failed command reception on Infineon devices")
Timeout B still needs to be extended.
The problem is most commonly encountered with context related operation
such as load context/save context. These are issued directly by the
kernel, and there is no retry logic for them.
When a filesystem is set up to use the TPM for unlocking the boot fails,
and restarting the userspace service is ineffective. This is likely
because ignoring a load context/save context result puts the real TPM
state and the TPM state expected by the kernel out of sync.
Chips known to be affected:
tpm_tis IFX1522:00: 2.0 TPM (device-id 0x1D, rev-id 54)
Description: SLB9672
Firmware Revision: 15.22
tpm_tis MSFT0101:00: 2.0 TPM (device-id 0x1B, rev-id 22)
Firmware Revision: 7.83
tpm_tis MSFT0101:00: 2.0 TPM (device-id 0x1A, rev-id 16)
Firmware Revision: 5.63
Link: https://lore.kernel.org/linux-integrity/Z5pI07m0Muapyu9w@kitsune.suse.cz/
Signed-off-by: Michal Suchanek <msuchanek@suse.de>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
Fix Smatch-detected issue:
drivers/char/tpm/tpm-buf.c:208 tpm_buf_read_u8() error:
uninitialized symbol 'value'.
drivers/char/tpm/tpm-buf.c:225 tpm_buf_read_u16() error:
uninitialized symbol 'value'.
drivers/char/tpm/tpm-buf.c:242 tpm_buf_read_u32() error:
uninitialized symbol 'value'.
Zero-initialize the return values in tpm_buf_read_u8(), tpm_buf_read_u16(),
and tpm_buf_read_u32() to guard against uninitialized data in case of a
boundary overflow.
Add defensive initialization ensures the return values are always defined,
preventing undefined behavior if the unexpected happens.
Signed-off-by: Purva Yeshi <purvayeshi550@gmail.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
tpm2_start_auth_session() does not mask TPM RC correctly from the callers:
[ 28.766528] tpm tpm0: A TPM error (2307) occurred start auth session
Process TPM RCs inside tpm2_start_auth_session(), and map them to POSIX
error codes.
Cc: stable@vger.kernel.org # v6.10+
Fixes: 699e3efd6c64 ("tpm: Add HMAC session start and end functions")
Reported-by: Herbert Xu <herbert@gondor.apana.org.au>
Closes: https://lore.kernel.org/linux-integrity/Z_NgdRHuTKP6JK--@gondor.apana.org.au/
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
Add driver for the vTPM defined by the AMD SVSM spec [1].
The specification defines a protocol that a SEV-SNP guest OS can use to
discover and talk to a vTPM emulated by the Secure VM Service Module (SVSM) in
the guest context, but at a more privileged level (VMPL0).
The new tpm-svsm platform driver uses API exposed by the x86/sev core
implementation interface to a SVSM to send commands and receive responses.
The device cannot be hot-plugged/unplugged as it is emulated by the platform,
so module_platform_driver_probe() can be used. The device will be registered
by the platform only when it's available, so the probe function just needs to
setup the tpm_chip.
This device does not support interrupts and sends responses to commands
synchronously.
In order to have .recv() called just after .send() in tpm_try_transmit(), the
.status() callback is not implemented as recently supported by commit
980a573621ea ("tpm: Make chip->{status,cancel,req_canceled} opt").
[1] "Secure VM Service Module for SEV-SNP Guests"
Publication # 58019 Revision: 1.00
[ bp: Massage commit message. ]
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Link: https://lore.kernel.org/r/20250410135118.133240-4-sgarzare@redhat.com
|
|
timer_delete[_sync]() replaces del_timer[_sync](). Convert the whole tree
over and remove the historical wrapper inlines.
Conversion was done with coccinelle plus manual fixups where necessary.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
tpm_ftpm_tee does not require chip->status, chip->cancel and
chip->req_canceled. Make them optional.
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@opinsys.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
Lazy flushing of TPM auth sessions can interact badly with IMA + kexec,
resulting in loaded session handles being leaked across the kexec and
not cleaned up. Fix by ensuring any active auth session is ended before
the TPM is told about the shutdown, matching what is done when
suspending.
Before:
root@debian-qemu-efi:~# tpm2_getcap handles-loaded-session
root@debian-qemu-efi:~# tpm2_getcap handles-saved-session
root@debian-qemu-efi:~# kexec --load --kexec-file-syscall …
root@debian-qemu-efi:~# systemctl kexec
…
root@debian-qemu-efi:~# tpm2_getcap handles-loaded-session
- 0x2000000
root@debian-qemu-efi:~# tpm2_getcap handles-saved-session
root@debian-qemu-efi:~#
(repeat kexec steps)
root@debian-qemu-efi:~# tpm2_getcap handles-loaded-session
- 0x2000000
- 0x2000001
root@debian-qemu-efi:~# tpm2_getcap handles-saved-session
root@debian-qemu-efi:~#
After:
root@debian-qemu-efi:~# tpm2_getcap handles-loaded-session
root@debian-qemu-efi:~# tpm2_getcap handles-saved-session
root@debian-qemu-efi:~# kexec --load --kexec-file-syscall …
root@debian-qemu-efi:~# systemctl kexec
…
root@debian-qemu-efi:~# tpm2_getcap handles-loaded-session
root@debian-qemu-efi:~# tpm2_getcap handles-saved-session
root@debian-qemu-efi:~#
Signed-off-by: Jonathan McDowell <noodles@meta.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
The TCG ACPI spec v1.4 defines a start method for the TPMs implemented with
the ARM CRB over FF-A ABI.
Add support for the FF-A start method, and use interfaces provided by the
ffa_crb driver to interact with the FF-A based TPM.
[jarkko: Fine-tuned the commit message.]
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Stuart Yoder <stuart.yoder@arm.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
Refactor TPM idle check to tpm_crb_has_idle(), and reduce paraentheses
usage in start method checks
[jarkko: Fine-tuned the commit message.]
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Stuart Yoder <stuart.yoder@arm.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
