summaryrefslogtreecommitdiff
path: root/drivers/clk
AgeCommit message (Collapse)Author
2025-12-08Merge tag 'clk-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "This is entirely SoC clk drivers. The majority diff wise is for the new Rockchip and Qualcomm clk drivers which is mostly lines and lines of data structures to describe the clk hardware in these SoCs. Beyond those two, Renesas continues to incrementally add clks to their SoC drivers, causing them to show up higher in the diffstat this time because they added quite a few clks all over the place. Overall it is a semi-quiet release that has some new clk drivers and the usual fixes for clock data that was wrong or missing and non-critical cleanups that plug error paths or fix typos. New Drivers: - Qualcomm IPQ5424 Network Subsystem Clock Controller - Qualcomm SM8750 Video Clock Controller - Rockchip RV1126B and RK3506 clock drivers - i.MX8ULP SIM LPAV clock driver - Samsung ACPM (firmware interface) clock driver - Altera Agilex5 clock driver" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (117 commits) clk: keystone: fix compile testing clk: keystone: syscon-clk: fix regmap leak on probe failure clk: qcom: Mark camcc_sm7150_hws static clk: samsung: exynos-clkout: Assign .num before accessing .hws clk: rockchip: Add clock and reset driver for RK3506 dt-bindings: clock: rockchip: Add RK3506 clock and reset unit clk: actions: Fix discarding const qualifier by 'container_of' macro clk: spacemit: Set clk_hw_onecell_data::num before using flex array clk: visconti: Add VIIF clocks dt-bindings: clock: tmpv770x: Add VIIF clocks dt-bindings: clock: tmpv770x: Remove definition of number of clocks clk: visconti: Do not define number of clocks in bindings clk: rockchip: Add clock controller for the RV1126B dt-bindings: clock, reset: Add support for rv1126b clk: rockchip: Implement rockchip_clk_register_armclk_multi_pll() clk: qcom: x1e80100-dispcc: Add USB4 router link resets dt-bindings: clock: qcom: x1e80100-dispcc: Add USB4 router link resets clk: qcom: videocc-sm8750: Add video clock controller driver for SM8750 dt-bindings: clock: qcom: Add SM8750 video clock controller clk: qcom: branch: Extend invert logic for branch2 mem clocks ...
2025-12-06Merge tag 'bitmap-for-6.19' of github.com:/norov/linuxLinus Torvalds
Pull bitmap updates from Yury Norov: - Runtime field_{get,prep}() (Geert) - Rust ID pool updates (Alice) - min_t() simplification (David) - __sw_hweightN kernel-doc fixes (Andy) - cpumask.h headers cleanup (Andy) * tag 'bitmap-for-6.19' of github.com:/norov/linux: (32 commits) rust_binder: use bitmap for allocation of handles rust: id_pool: do not immediately acquire new ids rust: id_pool: do not supply starting capacity rust: id_pool: rename IdPool::new() to with_capacity() rust: bitmap: add BitmapVec::new_inline() rust: bitmap: add MAX_LEN and MAX_INLINE_LEN constants cpumask: Don't use "proxy" headers soc: renesas: Use bitfield helpers clk: renesas: Use bitfield helpers ALSA: usb-audio: Convert to common field_{get,prep}() helpers soc: renesas: rz-sysc: Convert to common field_get() helper pinctrl: ma35: Convert to common field_{get,prep}() helpers iio: mlx90614: Convert to common field_{get,prep}() helpers iio: dac: Convert to common field_prep() helper gpio: aspeed: Convert to common field_{get,prep}() helpers EDAC/ie31200: Convert to common field_get() helper crypto: qat - convert to common field_get() helper clk: at91: Convert to common field_{get,prep}() helpers bitfield: Add non-constant field_{prep,get}() helpers bitfield: Add less-checking __FIELD_{GET,PREP}() ...
2025-12-05Merge tag 'soc-drivers-6.19' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull SoC driver updates from Arnd Bergmann: "This is the first half of the driver changes: - A treewide interface change to the "syscore" operations for power management, as a preparation for future Tegra specific changes - Reset controller updates with added drivers for LAN969x, eic770 and RZ/G3S SoCs - Protection of system controller registers on Renesas and Google SoCs, to prevent trivially triggering a system crash from e.g. debugfs access - soc_device identification updates on Nvidia, Exynos and Mediatek - debugfs support in the ST STM32 firewall driver - Minor updates for SoC drivers on AMD/Xilinx, Renesas, Allwinner, TI - Cleanups for memory controller support on Nvidia and Renesas" * tag 'soc-drivers-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (114 commits) memory: tegra186-emc: Fix missing put_bpmp Documentation: reset: Remove reset_controller_add_lookup() reset: fix BIT macro reference reset: rzg2l-usbphy-ctrl: Fix a NULL vs IS_ERR() bug in probe reset: th1520: Support reset controllers in more subsystems reset: th1520: Prepare for supporting multiple controllers dt-bindings: reset: thead,th1520-reset: Add controllers for more subsys dt-bindings: reset: thead,th1520-reset: Remove non-VO-subsystem resets reset: remove legacy reset lookup code clk: davinci: psc: drop unused reset lookup reset: rzg2l-usbphy-ctrl: Add support for RZ/G3S SoC reset: rzg2l-usbphy-ctrl: Add support for USB PWRRDY dt-bindings: reset: renesas,rzg2l-usbphy-ctrl: Document RZ/G3S support reset: eswin: Add eic7700 reset driver dt-bindings: reset: eswin: Documentation for eic7700 SoC reset: sparx5: add LAN969x support dt-bindings: reset: microchip: Add LAN969x support soc: rockchip: grf: Add select correct PWM implementation on RK3368 soc/tegra: pmc: Add USB wake events for Tegra234 amba: tegra-ahb: Fix device leak on SMMU enable ...
2025-12-05Merge tag 'soc-dt-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds
Pull SoC devicetree updates from Arnd Bergmann: "Three new SoCs got added in existing arm64 chip families: - Renesas R-Car X5H (R8A78000) is a new generation of automotive SoCs, based on 16 Cortex-A720 (Armv9.2) cores, which makes the the currently highest-perforance embedded SoC. - TI AM62L is a new variant of the AM62 family of industrial SoCs, this one comes without a GPU. - Qualcomm MSM8937 (Snapdragon 430) is an older mobile phone chip based on Cortex-A53, and closely related to MSM8917 (Snapdragn 425), which we already support. In addition, there are a good number of newly supported machines across SoC families: - Two Aspeed AST2600 (Cortex-A7) based BMC setups for large servers - Mobile Phones and tables based on Mediatek MT6582, Nvidia Tegra124, Qualcomm MSM8937 and Qualcomm MSM8939, - Two Laptops based on Qualcomm SoCs: one using the older sdm850, the other using x1p42100. - One Router based on Rockchips RK3568 - 24 variants of the Enclustra Mercury system-on-module, all based on 32-bit Intel/Altera SocFPGA chips, plus two boards using 64-bit SocFPGA Agilex chips.. - 30 industrial/embedded boards and single-board computers, using various chips from NXP, Rockchips, Mediatek, TI, Amlogic, Qualcomm, Spacemit, and Starfive. In total there are 783 commits here, the majority of these improving hardware support and cleaning up devicetree files across the tree, with the majority of the changes going into the Qualcomm, NXP, Renesas and Rockchips platforms" * tag 'soc-dt-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (782 commits) arm64: dts: mediatek: mt8195: Fix address range for JPEG decoder core 1 ARM: dts: samsung: exynos4412-midas: turn off SDIO WLAN chip during system suspend ARM: dts: samsung: exynos4210-trats: turn off SDIO WLAN chip during system suspend ARM: dts: samsung: exynos4210-i9100: turn off SDIO WLAN chip during system suspend ARM: dts: samsung: universal_c210: turn off SDIO WLAN chip during system suspend arm64: dts: amlogic: meson-g12b: Fix L2 cache reference for S922X CPUs arm64: dts: Add gpio_intc node for Amlogic S7D SoCs arm64: dts: Add gpio_intc node for Amlogic S7 SoCs arm64: dts: Add gpio_intc node for Amlogic S6 SoCs arm64: dts: amlogic: s7d: add ao secure node arm64: dts: amlogic: s7: add ao secure node arm64: dts: amlogic: s6: add ao secure node arm64: dts: amlogic: Fix the register name of the 'DBI' region dts: arm64: amlogic: add a5 pinctrl node arm64: dts: amlogic: s7d: add power domain controller node arm64: dts: amlogic: s7: add power domain controller node arm64: dts: amlogic: s6: add power domain controller node dts: arm64: amlogic: Add ISP related nodes for C3 arm64: dts: meson: add initial device-tree for Tanix TX9 Pro dt-bindings: arm: amlogic: add support for Tanix TX9 Pro ...
2025-12-03Merge branches 'clk-visconti', 'clk-imx', 'clk-microchip', 'clk-rockchip' ↵Stephen Boyd
and 'clk-qcom' into clk-next * clk-visconti: clk: visconti: Add VIIF clocks dt-bindings: clock: tmpv770x: Add VIIF clocks dt-bindings: clock: tmpv770x: Remove definition of number of clocks clk: visconti: Do not define number of clocks in bindings * clk-imx: clk: imx: add driver for imx8ulp's sim lpav dt-bindings: clock: document 8ULP's SIM LPAV clk: imx: imx8mp-audiomix: use devm_auxiliary_device_create() to simple code clk: imx: Add some delay before deassert the reset * clk-microchip: reset: mpfs: add non-auxiliary bus probing clk: lan966x: remove unused dt-bindings include clk: microchip: mpfs: use regmap for clocks dt-bindings: clk: microchip: mpfs: remove first reg region * clk-rockchip: clk: rockchip: Add clock and reset driver for RK3506 dt-bindings: clock: rockchip: Add RK3506 clock and reset unit clk: rockchip: Add clock controller for the RV1126B dt-bindings: clock, reset: Add support for rv1126b clk: rockchip: Implement rockchip_clk_register_armclk_multi_pll() dt-bindings: clock: rk3568: Drop CLK_NR_CLKS define clk: rockchip: rk3568: Drop CLK_NR_CLKS usage dt-bindings: clock: rk3568: Add SCMI clock ids * clk-qcom: (48 commits) clk: qcom: Mark camcc_sm7150_hws static clk: qcom: x1e80100-dispcc: Add USB4 router link resets dt-bindings: clock: qcom: x1e80100-dispcc: Add USB4 router link resets clk: qcom: videocc-sm8750: Add video clock controller driver for SM8750 dt-bindings: clock: qcom: Add SM8750 video clock controller clk: qcom: branch: Extend invert logic for branch2 mem clocks clk: qcom: ecpricc-qdu100: Add mem_enable_mask to the clock memory branch clk: qcom: clk_mem_branch: add enable mask and invert flags clk: qcom: mmcc-sdm660: Add missing MDSS reset dt-bindings: clock: mmcc-sdm660: Add missing MDSS reset clk: qcom: use different Kconfig prompts for APSS IPQ5424/6018 drivers clk: qcom: apss-ipq5424: remove unused 'apss_clk' structure dt-bindings: clock: qcom: Add Kaanapali Global clock controller dt-bindings: clock: qcom: Document the Kaanapali TCSR Clock Controller dt-bindings: clock: qcom-rpmhcc: Add RPMHCC for Kaanapali clk: qcom: tcsrcc-glymur: Update register offsets for clock refs clk: qcom: gcc-qcs615: Update the SDCC clock to use shared_floor_ops clk: qcom: camcc-sm7150: Fix PLL config of PLL2 clk: qcom: camcc-sm6350: Fix PLL config of PLL2 clk: qcom: Add NSS clock controller driver for IPQ5424 ...
2025-12-03Merge branches 'clk-socfpga', 'clk-renesas', 'clk-cleanup', 'clk-samsung' ↵Stephen Boyd
and 'clk-mediatek' into clk-next * clk-socfpga: clk: socfpga: agilex5: add clock driver for Agilex5 * clk-renesas: (35 commits) clk: renesas: r9a09g077: Add SPI module clocks clk: renesas: r9a09g056: Add USB3.0 clocks/resets clk: renesas: r9a09g057: Add USB3.0 clocks/resets clk: renesas: r9a09g047: Add RSCI clocks/resets dt-bindings: clock: renesas,r9a09g056-cpg: Add USB3.0 core clocks dt-bindings: clock: renesas,r9a09g057-cpg: Add USB3.0 core clocks clk: renesas: r9a06g032: Fix memory leak in error path clk: renesas: r9a09g077: Use devm_ helpers for divider clock registration clk: renesas: r9a09g077: Remove stray blank line clk: renesas: r9a09g077: Propagate rate changes to parent clocks clk: renesas: r8a779a0: Add 3DGE module clock clk: renesas: r8a779a0: Add ZG Core clock clk: renesas: rcar-gen4: Add support for clock dividers in FRQCRB dt-bindings: clock: r8a779a0: Add ZG core clock clk: renesas: r9a09g056: Add clock and reset entries for ISP clk: renesas: r9a09g056: Add support for PLLVDO, CRU clocks, and resets clk: renesas: r9a09g056: Add clocks and resets for DSI and LCDC modules clk: renesas: r9a09g077: Add TSU module clock clk: renesas: r9a09g057: Add clock and reset entries for DSI and LCDC clk: renesas: rzv2h: Add support for DSI clocks ... * clk-cleanup: clk: keystone: fix compile testing clk: keystone: syscon-clk: fix regmap leak on probe failure clk: samsung: exynos-clkout: Assign .num before accessing .hws clk: actions: Fix discarding const qualifier by 'container_of' macro clk: spacemit: Set clk_hw_onecell_data::num before using flex array clk: spacemit: fix comment typo clk: keystone: Fix discarded const qualifiers clk: sprd: sc9860: Simplify with of_device_get_match_data() * clk-samsung: firmware: exynos-acpm: add empty method to allow compile test MAINTAINERS: add ACPM clock bindings and driver clk: samsung: add Exynos ACPM clock driver firmware: exynos-acpm: register ACPM clocks pdev firmware: exynos-acpm: add DVFS protocol dt-bindings: firmware: google,gs101-acpm-ipc: add ACPM clocks clk: samsung: clk-pll: simplify samsung_pll_lock_wait() clk: samsung: exynosautov920: add block mfc clock support clk: samsung: exynosautov920: add clock support dt-bindings: clock: exynosautov920: add mfc clock definitions dt-bindings: clock: exynosautov920: add m2m clock definitions dt-bindings: clock: google,gs101-clock: add power-domains * clk-mediatek: clk: en7523: Add reset-controller support for EN7523 SoC dt-bindings: clock: airoha: Add reset support to EN7523 clock binding
2025-11-30clk: keystone: fix compile testingJohan Hovold
Some keystone clock drivers can be selected when COMPILE_TEST is enabled but since commit b745c0794e2f ("clk: keystone: Add sci-clk driver support") they are never actually built. Enable compile testing by allowing the build system to process the keystone drivers. Fixes: b745c0794e2f ("clk: keystone: Add sci-clk driver support") Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2025-11-30clk: keystone: syscon-clk: fix regmap leak on probe failureJohan Hovold
The mmio regmap allocated during probe is never freed. Switch to using the device managed allocator so that the regmap is released on probe failures (e.g. probe deferral) and on driver unbind. Fixes: a250cd4c1901 ("clk: keystone: syscon-clk: Do not use syscon helper to build regmap") Cc: stable@vger.kernel.org # 6.15 Cc: Andrew Davis <afd@ti.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2025-11-30clk: qcom: Mark camcc_sm7150_hws staticStephen Boyd
This isn't used outside this file. Mark it static. Fixes: 9f0532da4226 ("clk: qcom: Add Camera Clock Controller driver for SM7150") Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2025-11-30clk: samsung: exynos-clkout: Assign .num before accessing .hwsNathan Chancellor
Commit f316cdff8d67 ("clk: Annotate struct clk_hw_onecell_data with __counted_by") annotated the hws member of 'struct clk_hw_onecell_data' with __counted_by, which informs the bounds sanitizer (UBSAN_BOUNDS) about the number of elements in .hws[], so that it can warn when .hws[] is accessed out of bounds. As noted in that change, the __counted_by member must be initialized with the number of elements before the first array access happens, otherwise there will be a warning from each access prior to the initialization because the number of elements is zero. This occurs in exynos_clkout_probe() due to .num being assigned after .hws[] has been accessed: UBSAN: array-index-out-of-bounds in drivers/clk/samsung/clk-exynos-clkout.c:178:18 index 0 is out of range for type 'clk_hw *[*]' Move the .num initialization to before the first access of .hws[], clearing up the warning. Cc: stable@vger.kernel.org Fixes: f316cdff8d67 ("clk: Annotate struct clk_hw_onecell_data with __counted_by") Reported-by: Jochen Sprickerhof <jochen@sprickerhof.de> Closes: https://lore.kernel.org/aSIYDN5eyKFKoXKL@eldamar.lan/ Tested-by: Jochen Sprickerhof <jochen@sprickerhof.de> Signed-off-by: Nathan Chancellor <nathan@kernel.org> Reviewed-by: Kees Cook <kees@kernel.org> Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2025-11-25Merge tag 'reset-for-v6.19' of https://git.pengutronix.de/git/pza/linux into ↵Arnd Bergmann
soc/drivers Reset controller updates for v6.19 * Add support for LAN969x, eic770 and RZ/G3S reset controllers, for the RZ/G3S USB-PHY reset controller, and for the remaining TH1520 reset controllers. * Drop legacy reset control lookup code. * Include linux/bits.h from linux/reset.h to make it self-contained. * tag 'reset-for-v6.19' of https://git.pengutronix.de/git/pza/linux: Documentation: reset: Remove reset_controller_add_lookup() reset: fix BIT macro reference reset: rzg2l-usbphy-ctrl: Fix a NULL vs IS_ERR() bug in probe reset: th1520: Support reset controllers in more subsystems reset: th1520: Prepare for supporting multiple controllers dt-bindings: reset: thead,th1520-reset: Add controllers for more subsys dt-bindings: reset: thead,th1520-reset: Remove non-VO-subsystem resets reset: remove legacy reset lookup code clk: davinci: psc: drop unused reset lookup reset: rzg2l-usbphy-ctrl: Add support for RZ/G3S SoC reset: rzg2l-usbphy-ctrl: Add support for USB PWRRDY dt-bindings: reset: renesas,rzg2l-usbphy-ctrl: Document RZ/G3S support reset: eswin: Add eic7700 reset driver dt-bindings: reset: eswin: Documentation for eic7700 SoC reset: sparx5: add LAN969x support dt-bindings: reset: microchip: Add LAN969x support Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-11-24clk: renesas: Use bitfield helpersGeert Uytterhoeven
Use the FIELD_{GET,PREP}() and field_{get,prep}() helpers for const respective non-const bitfields, instead of open-coding the same operations. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Yury Norov (NVIDIA) <yury.norov@gmail.com>
2025-11-24clk: at91: Convert to common field_{get,prep}() helpersGeert Uytterhoeven
Drop the driver-specific field_get() and field_prep() macros, in favor of the globally available variants from <linux/bitfield.h>. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-by: Stephen Boyd <sboyd@kernel.org> Acked-by: Claudiu Beznea <claudiu.beznea@tuxon.dev> Signed-off-by: Yury Norov (NVIDIA) <yury.norov@gmail.com>
2025-11-24clk: at91: pmc: #undef field_{get,prep}() before definitionGeert Uytterhoeven
Prepare for the advent of globally available common field_get() and field_prep() macros by undefining the symbols before defining local variants. This prevents redefinition warnings from the C preprocessor when introducing the common macros later. Suggested-by: Yury Norov <yury.norov@gmail.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-by: Stephen Boyd <sboyd@kernel.org> Acked-by: Claudiu Beznea <claudiu.beznea@tuxon.dev> Signed-off-by: Yury Norov (NVIDIA) <yury.norov@gmail.com>
2025-11-23clk: rockchip: Add clock and reset driver for RK3506Elaine Zhang
Add the clock and reset tree definitions for the new RK3506 SoC. Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com> Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com> Link: https://patch.msgid.link/20251121075350.2564860-3-zhangqing@rock-chips.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2025-11-20clk: actions: Fix discarding const qualifier by 'container_of' macroAdrian Barnaś
Remove const qualifier from functions parameter because it was discarded when container_of was called. Received pointer had mutable access to it through received container. Signed-off-by: Adrian Barnaś <abarnas@google.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2025-11-20clk: spacemit: Set clk_hw_onecell_data::num before using flex arrayCharles Mirabile
When booting with KASAN enabled the following splat is encountered during probe of the k1 clock driver: UBSAN: array-index-out-of-bounds in drivers/clk/spacemit/ccu-k1.c:1044:16 index 0 is out of range for type 'clk_hw *[*]' CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.18.0-rc5+ #1 PREEMPT(lazy) Hardware name: Unknown Unknown Product/Unknown Product, BIOS 2022.10spacemit 10/01/2022 Call Trace: [<ffffffff8002b628>] dump_backtrace+0x28/0x38 [<ffffffff800027d2>] show_stack+0x3a/0x50 [<ffffffff800220c2>] dump_stack_lvl+0x5a/0x80 [<ffffffff80022100>] dump_stack+0x18/0x20 [<ffffffff800164b8>] ubsan_epilogue+0x10/0x48 [<ffffffff8099034e>] __ubsan_handle_out_of_bounds+0xa6/0xa8 [<ffffffff80acbfa6>] k1_ccu_probe+0x37e/0x420 [<ffffffff80b79e6e>] platform_probe+0x56/0x98 [<ffffffff80b76a7e>] really_probe+0x9e/0x350 [<ffffffff80b76db0>] __driver_probe_device+0x80/0x138 [<ffffffff80b76f52>] driver_probe_device+0x3a/0xd0 [<ffffffff80b771c4>] __driver_attach+0xac/0x1b8 [<ffffffff80b742fc>] bus_for_each_dev+0x6c/0xc8 [<ffffffff80b76296>] driver_attach+0x26/0x38 [<ffffffff80b759ae>] bus_add_driver+0x13e/0x268 [<ffffffff80b7836a>] driver_register+0x52/0x100 [<ffffffff80b79a78>] __platform_driver_register+0x28/0x38 [<ffffffff814585da>] k1_ccu_driver_init+0x22/0x38 [<ffffffff80023a8a>] do_one_initcall+0x62/0x2a0 [<ffffffff81401c60>] do_initcalls+0x170/0x1a8 [<ffffffff81401e7a>] kernel_init_freeable+0x16a/0x1e0 [<ffffffff811f7534>] kernel_init+0x2c/0x180 [<ffffffff80025f56>] ret_from_fork_kernel+0x16/0x1d8 [<ffffffff81205336>] ret_from_fork_kernel_asm+0x16/0x18 ---[ end trace ]--- This is bogus and is simply a result of KASAN consulting the `.num` member of the struct for bounds information (as it should due to `__counted_by`) and finding 0 set by kzalloc() because it has not been initialized before the loop that fills in the array. The easy fix is to just move the line that sets `num` to before the loop that fills the array so that KASAN has the information it needs to accurately conclude that the access is valid. Fixes: 1b72c59db0add ("clk: spacemit: Add clock support for SpacemiT K1 SoC") Tested-by: Yanko Kaneti <yaneti@declera.com> Signed-off-by: Charles Mirabile <cmirabil@redhat.com> Reviewed-by: Alex Elder <elder@riscstar.com> Reviewed-by: Troy Mitchell <troy.mitchell@linux.spacemit.com> Reviewed-by: Yixun Lan <dlan@gentoo.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2025-11-20clk: visconti: Add VIIF clocksYuji Ishikawa
Add the control sequence of register bits to handle the clocks and the resets of Video Input Interface. Signed-off-by: Yuji Ishikawa <yuji2.ishikawa@toshiba.co.jp> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2025-11-20clk: visconti: Do not define number of clocks in bindingsYuji Ishikawa
Remove use of TMPV770X_NR_CLK. Instead, define number of clocks inside the driver directory. The same for TMPV770X_NR_RESET and TMPV770X_NR_PLL. Signed-off-by: Yuji Ishikawa <yuji2.ishikawa@toshiba.co.jp> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2025-11-20clk: rockchip: Add clock controller for the RV1126BElaine Zhang
Add the clock and reset tree definitions for the new rv1126b SoC. Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com> Link: https://patch.msgid.link/20251111025738.869847-4-zhangqing@rock-chips.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2025-11-20clk: rockchip: Implement rockchip_clk_register_armclk_multi_pll()Elaine Zhang
The current path will have an independent PLL(LPLL\BPLL) exclusively for the CPU to use. As follows: |-\ --lpll--| \ |mux|--[gate]--[div]--clk_core-- --gpll--| / |-/ The new chip does not have a dedicated PLL for the cpu; it is distributed nearby from the common PLL. If there are special frequency requirements that require the use of pvtpll, explanations will be submitted later. The clock path of new soc CPU simplified as follows: --gpll--|--\ | \ | \ | \ --v0pll--| mux |--[gate]--[div]--clk_core-- | / | / --v1pll--| / |--/ Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com> Link: https://patch.msgid.link/20251111025738.869847-2-zhangqing@rock-chips.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2025-11-18clk: qcom: x1e80100-dispcc: Add USB4 router link resetsKonrad Dybcio
The router link clock branches also feature some reset logic, which is required to properly power sequence the hardware for DP tunneling over USB4. Describe these missing resets. Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Reviewed-by: Taniya Das <taniya.das@oss.qualcomm.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Link: https://lore.kernel.org/r/20251118-topic-usb4_x1e_dispcc-v1-2-14c68d842c71@oss.qualcomm.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2025-11-18clk: qcom: videocc-sm8750: Add video clock controller driver for SM8750Taniya Das
Add support for the video clock controller for video clients to be able to request for videocc clocks on SM8750 platform. Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Signed-off-by: Taniya Das <taniya.das@oss.qualcomm.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Reviewed-by: Imran Shaik <imran.shaik@oss.qualcomm.com> Link: https://lore.kernel.org/r/20251118-sm8750-videocc-v2-v4-5-049882a70c9f@oss.qualcomm.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2025-11-18clk: qcom: branch: Extend invert logic for branch2 mem clocksTaniya Das
Some clock branches require inverted logic for memory gating, where disabling the memory involves setting a bit and enabling it involves clearing the same bit. This behavior differs from the standard approach memory branch clocks ops where enabling typically sets the bit. The mem_enable_invert to allow conditional handling of these sequences of the inverted control logic for memory operations required on those memory clock branches. Signed-off-by: Taniya Das <taniya.das@oss.qualcomm.com> Reviewed-by: Imran Shaik <imran.shaik@oss.qualcomm.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Link: https://lore.kernel.org/r/20251118-sm8750-videocc-v2-v4-3-049882a70c9f@oss.qualcomm.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2025-11-18clk: davinci: psc: drop unused reset lookupBartosz Golaszewski
We no longer support any non-DT DaVinci boards so there are no more users of legacy reset lookup. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Acked-by: Stephen Boyd <sboyd@kernel.org> Acked-by: David Lechner <david@lechnology.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2025-11-18clk: qcom: ecpricc-qdu100: Add mem_enable_mask to the clock memory branchTaniya Das
The ECPRI clock controller’s mem_ops clocks used the mem_enable_ack_mask directly for both setting and polling. Add the newly introduced 'mem_enable_mask' to the memory control branch clocks of ECPRI clock controller to align to the new mem_ops handling. Signed-off-by: Taniya Das <taniya.das@oss.qualcomm.com> Reviewed-by: Imran Shaik <imran.shaik@oss.qualcomm.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Link: https://lore.kernel.org/r/20251118-sm8750-videocc-v2-v4-2-049882a70c9f@oss.qualcomm.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2025-11-18clk: qcom: clk_mem_branch: add enable mask and invert flagsTaniya Das
Introduce mem_enable_mask and mem_enable_invert in clk_mem_branch to describe memory gating implementations that use a separate mask and/or inverted enable logic. This documents hardware behavior in data instead of code and will be used by upcoming platform descriptions. Signed-off-by: Taniya Das <taniya.das@oss.qualcomm.com> Reviewed-by: Imran Shaik <imran.shaik@oss.qualcomm.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Link: https://lore.kernel.org/r/20251118-sm8750-videocc-v2-v4-1-049882a70c9f@oss.qualcomm.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2025-11-18clk: qcom: mmcc-sdm660: Add missing MDSS resetAlexey Minnekhanov
Add offset for display subsystem reset in multimedia clock controller block, which is necessary to reset display when there is some configuration in display controller left by previous stock (Android) bootloader to provide continuous splash functionaluty. Before 6.17 power domains were turned off for long enough to clear registers, now this is not the case and a proper reset is needed to have functioning display. Fixes: 0e789b491ba0 ("pmdomain: core: Leave powered-on genpds on until sync_state") Cc: stable@vger.kernel.org # 6.17 Signed-off-by: Alexey Minnekhanov <alexeymin@postmarketos.org> Reviewed-by: Taniya Das <taniya.das@oss.qualcomm.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Link: https://lore.kernel.org/r/20251116-sdm660-mdss-reset-v2-2-6219bec0a97f@postmarketos.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2025-11-14syscore: Pass context data to callbacksThierry Reding
Several drivers can benefit from registering per-instance data along with the syscore operations. To achieve this, move the modifiable fields out of the syscore_ops structure and into a separate struct syscore that can be registered with the framework. Add a void * driver data field for drivers to store contextual data that will be passed to the syscore ops. Acked-by: Rafael J. Wysocki (Intel) <rafael@kernel.org> Signed-off-by: Thierry Reding <treding@nvidia.com>
2025-11-13clk: en7523: Add reset-controller support for EN7523 SoCMikhail Kshevetskiy
Introduce reset API support to EN7523 clock driver. EN7523 uses the same reset logic as EN7581, so just reuse existing code. Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2025-11-13Merge tag 'samsung-clk-6.19' of ↵Stephen Boyd
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into clk-samsung Pull more Samsung clk driver updates from Krzysztof Kozlowski: - ExynosAutov920: add support for additional clock controllers (M2M and MFC) * tag 'samsung-clk-6.19' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: clk: samsung: clk-pll: simplify samsung_pll_lock_wait() clk: samsung: exynosautov920: add block mfc clock support clk: samsung: exynosautov920: add clock support dt-bindings: clock: exynosautov920: add mfc clock definitions dt-bindings: clock: exynosautov920: add m2m clock definitions dt-bindings: clock: google,gs101-clock: add power-domains
2025-11-13clk: spacemit: fix comment typoEncrow Thorne
Fix incorrect comment to match the filename. Reviewd-by: Troy Mitchell <troy.mitchell@linux.spacemit.com> Signed-off-by: Encrow Thorne <jyc0019@gmail.com> Reviewed-by: Yixun Lan <dlan@gentoo.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2025-11-13clk: keystone: Fix discarded const qualifiersAdrian Barnaś
Add const qualifiers to the pointers returned from 'container_of' macro to prevent breaking the const promise on const struct pointers from parameters. Once you have a mutable container structure pointer, you can change structure fields through it, which violates the const guarantee. Signed-off-by: Adrian Barnaś <abarnas@google.com> Reviewed-by: Nishanth Menon <nm@ti.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2025-11-13clk: renesas: r9a09g077: Add SPI module clocksCosmin Tanislav
The Renesas RZ/T2H (R9A09G077) and RZ/N2H (R9A09G087) SoCs have four SPI peripherals, each with their own clock divider, which divides PLL4 by either 24, 25, 30 or 32, similar to the SCI peripheral. The dividers feed into the usual module clocks. Add them all. Signed-off-by: Cosmin Tanislav <cosmin-gabriel.tanislav.xa@renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://patch.msgid.link/20251105104151.1489281-2-cosmin-gabriel.tanislav.xa@renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2025-11-13clk: renesas: r9a09g056: Add USB3.0 clocks/resetsLad Prabhakar
Add USB3.0 clock and reset entries. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://patch.msgid.link/20251101050034.738807-5-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2025-11-13clk: renesas: r9a09g057: Add USB3.0 clocks/resetsLad Prabhakar
Add USB3.0 clock and reset entries. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://patch.msgid.link/20251101050034.738807-4-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2025-11-13clk: renesas: r9a09g047: Add RSCI clocks/resetsBiju Das
Add RSCI clock and reset entries. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://patch.msgid.link/20251027154615.115759-2-biju.das.jz@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2025-11-13clk: qcom: use different Kconfig prompts for APSS IPQ5424/6018 driversGabor Juhos
Both the IPQ_APSS_5424 and IPQ_APSS_6018 symbols are using the same prompt which complicates to see that which option corresponds to which driver. Add a prefix to both prompts to make it easier to differentiate the two options. While at it, also fix a typo in the help text of the IPQ_APSS_5424 symbol. Signed-off-by: Gabor Juhos <j4g8y7@gmail.com> Link: https://lore.kernel.org/r/20251113-clk-qcom-apss-ipq-prompt-v1-1-b62cf2142609@gmail.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2025-11-13clk: qcom: apss-ipq5424: remove unused 'apss_clk' structureGabor Juhos
The locally defined 'apss_clk' structure is not used in the code, so remove that. Compile tested only. Signed-off-by: Gabor Juhos <j4g8y7@gmail.com> Link: https://lore.kernel.org/r/20251113-ipq5424-remove-apss_clk-v1-1-e942e720cf99@gmail.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2025-11-12clk: renesas: r9a06g032: Fix memory leak in error pathHaotian Zhang
The current code uses of_iomap() to map registers but never calls iounmap() on any error path after the mapping. This causes a memory leak when probe fails after successful ioremap, for example when of_clk_add_provider() or r9a06g032_add_clk_domain() fails. Replace of_iomap() with devm_of_iomap() to automatically unmap the region on probe failure. Update the error check accordingly to use IS_ERR() and PTR_ERR() since devm_of_iomap() returns ERR_PTR on error. Fixes: 4c3d88526eba ("clk: renesas: Renesas R9A06G032 clock driver") Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://patch.msgid.link/20251030061603.1954-1-vulab@iscas.ac.cn Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2025-11-12clk: renesas: r9a09g077: Use devm_ helpers for divider clock registrationLad Prabhakar
Convert the divider clock registration in the R9A09G077 CPG driver to use device-managed (devm_) helper functions. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://patch.msgid.link/20251028165127.991351-4-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2025-11-12clk: renesas: r9a09g077: Remove stray blank lineLad Prabhakar
Remove an unnecessary blank line at the end of r9a09g077_cpg_div_clk_register() to tidy up the code. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://patch.msgid.link/20251028165127.991351-3-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2025-11-12clk: renesas: r9a09g077: Propagate rate changes to parent clocksLad Prabhakar
Add the CLK_SET_RATE_PARENT flag to divider clock registration so that rate changes can propagate to parent clocks when needed. This allows the CPG divider clocks to request rate adjustments from their parent, ensuring correct frequency scaling and improved flexibility in clock rate selection. Fixes: 065fe720eec6e ("clk: renesas: Add support for R9A09G077 SoC") Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://patch.msgid.link/20251028165127.991351-2-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2025-11-12clk: renesas: r8a779a0: Add 3DGE module clockNiklas Söderlund
Describe the 3DGE module clock needed to operate the PowerVR GPU. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://patch.msgid.link/20251106211604.2766465-5-niklas.soderlund+renesas@ragnatech.se Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2025-11-11reset: mpfs: add non-auxiliary bus probingConor Dooley
While the auxiliary bus was a nice bandaid, and meant that re-writing the representation of the clock regions in devicetree was not required, it has run its course. The "mss_top_sysreg" region that contains the clock and reset regions, also contains pinctrl and an interrupt controller, so the time has come rewrite the devicetree and probe the reset controller from an mfd devicetree node, rather than implement those drivers using the auxiliary bus. Wanting to avoid propagating this naive/incorrect description of the hardware to the new pic64gx SoC is a major motivating factor here. Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Acked-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
2025-11-11clk: imx: add driver for imx8ulp's sim lpavLaurentiu Mihalcea
The i.MX8ULP System Integration Module (SIM) LPAV module is a block control module found inside the LPAV subsystem, which offers some clock gating options and reset line assertion/de-assertion capabilities. Therefore, the clock gate management is supported by registering the module's driver as a clock provider, while the reset capabilities are managed via the auxiliary device API to allow the DT node to act as a reset and clock provider. Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com> Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Link: https://lore.kernel.org/r/20251104120301.913-4-laurentiumihalcea111@gmail.com Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
2025-11-11clk: imx: imx8mp-audiomix: use devm_auxiliary_device_create() to simple codePeng Fan
Use helper function devm_auxiliary_device_create() to remove some boilerplate code. Reviewed-by: Abel Vesa <abel.vesa@linaro.org> Reviewed-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Shengjiu Wang <shengjiu.wang@gmail.com> Link: https://lore.kernel.org/r/20251024-auxiliary-v2-1-a353dc9e6b1a@nxp.com Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
2025-11-11clk: imx: Add some delay before deassert the resetJacky Bai
Some of the PCCs on i.MX8ULP have a sw_rst bit to control the peripheral reset through SW method. For peripherals like GPU that need sync reset, some delay is necessary befere & after release the reset to make sure the HW is reset into a known status. So add some delay before & after release reset. Signed-off-by: Jacky Bai <ping.bai@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Link: https://lore.kernel.org/r/20250801072153.1974428-1-ping.bai@nxp.com Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
2025-11-10clk: sprd: sc9860: Simplify with of_device_get_match_data()Krzysztof Kozlowski
Driver's probe function matches against driver's of_device_id table, where each entry has non-NULL match data, so of_match_node() can be simplified with of_device_get_match_data(). Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> [sboyd@kernel.org: Use device_get_match_data() instead, drop printk noise] Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2025-11-10clk: mvebu: cp110 add CLK_IGNORE_UNUSED to pcie_x10, pcie_x11 & pcie_x4Josua Mayer
CP110 based platforms rely on the bootloader for pci port initialization. TF-A actively prevents non-uboot re-configuration of pci lanes, and many boards do not have software control over the pci card reset. If a pci port had link at boot-time and the clock is stopped at a later point, the link fails and can not be recovered. PCI controller driver probe - and by extension ownership of a driver for the pci clocks - may be delayed especially on large modular kernels, causing the clock core to start disabling unused clocks. Add the CLK_IGNORE_UNUSED flag to the three pci port's clocks to ensure they are not stopped before the pci controller driver has taken ownership and tested for an existing link. This fixes failed pci link detection when controller driver probes late, e.g. with arm64 defconfig and CONFIG_PHY_MVEBU_CP110_COMPHY=m. Closes: https://lore.kernel.org/r/b71596c7-461b-44b6-89ab-3cfbd492639f@solid-run.com Signed-off-by: Josua Mayer <josua@solid-run.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
generated by cgit v1.2.3 (git 2.0.4) at 2025-12-26 11:21:40 +0000