summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/amd/display/dc/dccg
AgeCommit message (Collapse)Author
13 daysdrm/amd/display: Check for S0i3 to be done before DCCG init on DCN21Ivan Lipski
[WHY] On DCN21, dccg2_init() is called in dcn10_init_hw() before bios_golden_init(). During S0i3 resume, BIOS sets MICROSECOND_TIME_BASE_DIV to 0x00120464 as a marker. dccg2_init() overwrites this to 0x00120264, causing dcn21_s0i3_golden_init_wa() to misdetect the state and skip golden init. Eventually during the resume sequence, a flip timeout occurs. [HOW] Skip DCCG on dccg2_is_s0i3_golden_init_wa_done() on DCN21. Fixes: 4c595e75110e ("drm/amd/display: Migrate DCCG registers access from hwseq to dccg component.") Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Ivan Lipski <ivan.lipski@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit c61eda434336cf2c033aa35efdc9a08b31d2fdfa)
13 daysdrm/amd/display: Add missing DCCG register entries for DCN20-DCN316Ivan Lipski
Commit 4c595e75110e ("drm/amd/display: Migrate DCCG registers access from hwseq to dccg component.") moved register writes from hwseq to dccg2_*() functions but did not add the registers to the DCCG register list macros. The struct fields default to 0, so REG_WRITE() targets MMIO offset 0, causing a GPU hang on resume (seen on DCN21/DCN30 during IGT kms_cursor_crc@cursor-suspend). Add - MICROSECOND_TIME_BASE_DIV - MILLISECOND_TIME_BASE_DIV - DCCG_GATE_DISABLE_CNTL - DCCG_GATE_DISABLE_CNTL2 - DC_MEM_GLOBAL_PWR_REQ_CNTL to macros in dcn20_dccg.h, dcn301_dccg.h, dcn31_dccg.h, and dcn314_dccg.h. Fixes: 4c595e75110e ("drm/amd/display: Migrate DCCG registers access from hwseq to dccg component.") Reported-by: Rafael Passos <rafael@rcpassos.me> Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Ivan Lipski <ivan.lipski@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit e6e2b956fc814de766d3480be7018297c41d3ce0)
2026-02-21Convert 'alloc_obj' family to use the new default GFP_KERNEL argumentLinus Torvalds
This was done entirely with mindless brute force, using git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' | xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/' to convert the new alloc_obj() users that had a simple GFP_KERNEL argument to just drop that argument. Note that due to the extreme simplicity of the scripting, any slightly more complex cases spread over multiple lines would not be triggered: they definitely exist, but this covers the vast bulk of the cases, and the resulting diff is also then easier to check automatically. For the same reason the 'flex' versions will be done as a separate conversion. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2026-02-21treewide: Replace kmalloc with kmalloc_obj for non-scalar typesKees Cook
This is the result of running the Coccinelle script from scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to avoid scalar types (which need careful case-by-case checking), and instead replace kmalloc-family calls that allocate struct or union object instances: Single allocations: kmalloc(sizeof(TYPE), ...) are replaced with: kmalloc_obj(TYPE, ...) Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...) are replaced with: kmalloc_objs(TYPE, COUNT, ...) Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...) are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...) (where TYPE may also be *VAR) The resulting allocations no longer return "void *", instead returning "TYPE *". Signed-off-by: Kees Cook <kees@kernel.org>
2026-02-19drm/amd/display: Migrate DCCG registers access from hwseq to dccg component.Bhuvanachandra Pinninti
[Why] Direct DCCG register access in hwseq layer was creating register conflicts. [How] Migrated DCCG registers from hwseq-dccg component. Reviewed-by: Martin Leung <Martin.Leung@amd.com> Signed-off-by: Bhuvanachandra Pinninti <BhuvanaChandra.Pinninti@amd.com> Signed-off-by: Ray Wu <ray.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-02-19drm/amd/display: Expose functions of other dcn useDmytro Laktyushkin
[Why & HOw] Expose some functions for later dcns to reuse Reviewed-by: Charlene Liu <charlene.liu@amd.com> Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Dmytro Laktyushkin <dmytro.laktyushkin@amd.com> Signed-off-by: Ray Wu <ray.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-02-12drm/amd/display: Revert "Migrate DCCG register access from hwseq to dccg ↵Nicholas Carbones
component." [Why & How] This reverts commit 949adb4789fe3c24eea01d9c2efe94ab92694a0d, which causes regressions related to HDCP when resuming from S3. Reviewed-by: Joshua Aberback <joshua.aberback@amd.com> Signed-off-by: Nicholas Carbones <ncarbone@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-02-03drm/amd/display: Make some DCN35 DCCG symbols non-staticNicholas Kazlauskas
In order to have few DCN35 functions be leveraged for future ASIC implementations. Expose them to the dcn35_dccg.h header. Reviewed-by: Ovidiu Bunea <ovidiu.bunea@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-02-03drm/amd/display: Migrate DCCG register access from hwseq to dccg component.Bhuvanachandra Pinninti
[why] Direct DCCG register access in hwseq layer was creating register conflicts. [how] Migrated DCCG registers from hwseq to dccg component. Reviewed-by: Martin Leung <martin.leung@amd.com> Signed-off-by: Bhuvanachandra Pinninti <bpinnint@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-10-28drm/amd/display: Add more DC HW state info to underflow loggingKaren Chen
[Why] Debugging underflow issues frequently requires knowing the HW state at the time of underflow. To enable capturing this HW state information, interface functions are needed for the various DC HW blocks. [How] This change adds the interface functions to read HW state for the following DC HW blocks: - HUBBUB - HUBP - DPP - MPC - OPP - DSC - OPTC - DCCG Reviewed-by: George Shen <george.shen@amd.com> Signed-off-by: Karen Chen <Karen.Chen@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-10-20drm/amd/display: Fix GFP_ATOMIC abuseAurabindo Pillai
There is a lot GFP_ATOMIC allocations which are not in interrupt context. Change them to use GFP_KERNEL instead. Reviewed-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-10-20drm/amd/display: Move all DCCG RCG into HWSS root_clock_controlOvidiu Bunea
[why & how] Enabling/disabling DCCG RCG should be done as a last-level step when enabling/disable blocks. This is handled by HWSS root_clock_control already during optimize_bandwidth. However, dccg35_dpp_root_clock_control was missing the RCG enable call on the disable path. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Ovidiu Bunea <ovidiu.bunea@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-10-20drm/amd/display: fix dppclk rcg poweron checkYihan Zhu
[WHY & HOW] dppclk rcg power down will flip the poweron flag in the cache to cause dppclk rcg will never run the rcg ungate sequence in some condition. Wait 10us to let dpp dto fully ramp. Reviewed-by: Ovidiu (Ovi) Bunea <ovidiu.bunea@amd.com> Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Yihan Zhu <Yihan.Zhu@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-10-20drm/amd/display: add dccg dfs mask defCharlene Liu
[why] add some register masks for DCCG Reviewed-by: Yihan Zhu <yihan.zhu@amd.com> Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Charlene Liu <Charlene.Liu@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-10-20drm/amd/display: add dispclk ramping to dcn35.Charlene Liu
[why] this is a required logic based on HW programming guide. tested/ported on dcn401. Reviewed-by: Yihan Zhu <yihan.zhu@amd.com> Signed-off-by: Charlene Liu <Charlene.Liu@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-10-13drm/amd/display: Prevent Gating DTBCLK before It Is Properly LatchedFangzhi Zuo
[why] 1. With allow_0_dtb_clk enabled, the time required to latch DTBCLK to 600 MHz depends on the SMU. If DTBCLK is not latched to 600 MHz before set_mode completes, gating DTBCLK causes the DP2 sink to lose its clock source. 2. The existing DTBCLK gating sequence ungates DTBCLK based on both pix_clk and ref_dtbclk, but gates DTBCLK when either pix_clk or ref_dtbclk is zero. pix_clk can be zero outside the set_mode sequence before DTBCLK is properly latched, which can lead to DTBCLK being gated by mistake. [how] Consider both pixel_clk and ref_dtbclk when determining when it is safe to gate DTBCLK; this is more accurate. Reviewed-by: Charlene Liu <charlene.liu@amd.com> Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-09-23drm/amd/display: Insert dccg log for easy debugCharlene Liu
[why] Log for sequence tracking Reviewed-by: Ovidiu (Ovi) Bunea <ovidiu.bunea@amd.com> Reviewed-by: Yihan Zhu <yihan.zhu@amd.com> Signed-off-by: Charlene Liu <Charlene.Liu@amd.com> Signed-off-by: Ivan Lipski <ivan.lipski@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-09-05drm/amd/display: Correct sequences and delays for DCN35 PG & RCGOvidiu Bunea
[why] The current PG & RCG programming in driver has some gaps and incorrect sequences. [how] Added delays after ungating clocks to allow ramp up, increased polling to allow more time for power up, and removed the incorrect sequences. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Charlene Liu <charlene.liu@amd.com> Signed-off-by: Ovidiu Bunea <ovidiu.bunea@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-08-29drm/amd/display: incorrect conditions for failing dto calculationsClay King
[Why & How] Previously, when calculating dto phase, we would incorrectly fail when phase <=0 without additionally checking for the integer value. This meant that calculations would incorrectly fail when the desired pixel clock was an exact multiple of the reference clock. Reviewed-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Clay King <clayking@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-06-24drm/amd/display: Add num_slices_h to set_dto_dscclk signatureIlya Bakoulin
Add the number of horizontal slices argument to allow configuring clock based on slice number. Reviewed-by: Nevenko Stupar <nevenko.stupar@amd.com> Signed-off-by: Ilya Bakoulin <Ilya.Bakoulin@amd.com> Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-05-05drm/amd/display: disable DPP RCG before DPP CLK enableCharlene Liu
[why] DPP CLK enable needs to disable DPPCLK RCG first. The DPPCLK_en in dccg should always be enabled when the corresponding pipe is enabled. Reviewed-by: Hansen Dsouza <hansen.dsouza@amd.com> Signed-off-by: Charlene Liu <Charlene.Liu@amd.com> Signed-off-by: Ray Wu <ray.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-05-05drm/amd/display: allow dscclk disableCharlene Liu
[why] when dscclk rcg disabled from usr reg option, dsc clock will remain enabled because driver was doing two things both dscclk and dsc rcg in the same routine. Reviewed-by: Hansen Dsouza <hansen.dsouza@amd.com> Signed-off-by: Charlene Liu <Charlene.Liu@amd.com> Signed-off-by: Ray Wu <ray.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-25drm/amd/display: Refactor DCN4x and related codePatel, Swapnil
[why & how] Refactor existing code related to DCN4x for better code sharing with other modules. Reviewed-by: Charlene Liu <charlene.liu@amd.com> Signed-off-by: Swapnil Patel <Swapnil.Patel@amd.com> Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-12drm/amd/display: Allow reuse of of DCN4x codeDmytro
Remove the static qualifier to make it available for code sharing with other components. Reviewed-by: Charlene Liu <charlene.liu@amd.com> Signed-off-by: Dmytro <dmytro.laktyushkin@amd.com> Signed-off-by: Charlene Liu <Charlene.Liu@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-11-20drm/amd/display: Remove PIPE_DTO_SRC_SEL programming from set_dtbclk_dtoOvidiu Bunea
There are cases where an OTG is remapped from driving a regular HDMI display to a DP/eDP display. There are also cases where DTBCLK needs to be enabled for HPO, but DTBCLK DTO programming may be done while OTG is still enabled which is dangerous as the PIPE_DTO_SRC_SEL programming may change the pixel clock generator source for a mapped and running OTG and cause it to hang. Remove the PIPE_DTO_SRC_SEL programming from this sequence since it is already done in program_pixel_clk(). Additionally, make sure that program_pixel_clk sets DTBCLK DTO as source for special HDMI cases. Cc: stable@vger.kernel.org # 6.11+ Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Ovidiu Bunea <Ovidiu.Bunea@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-01drm/amd/display: Configure DTBCLK_P with OPTC only for dcn401Dillon Varone
[WHY] DTBCLK_P is used to generate virtual pixel clock, and to drive the HPO stream encoder clock. Programming the required clock when enabling/disabling both components can cause issues. For example, if HPO is being disabled and clock source is changed to REFCLK, virtual pixel rate will then be wrong, causing issues in CRTC. [HOW] Only program the DTBCLK_P when programming CRTC, as its expected it will be enabled prior to HPO, and disabled after HPO in all valid cases. Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-01drm/amd/display: Adjust PHY FSM transition to TX_EN-to-PLL_ON for TMDSRyan Seto
[Why] If two monitors with TMDS signals were timing synced and one was disconnected, the stream would go out of sync too early due to the PLL turning off and the system could hang [How] On link disable output, change PHY FSM transition from TX_EN-to-PHY_OFF to TX_EN-to-PLL_ON for TMDS Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Ryan Seto <ryanseto@amd.com> Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-06drm/amd/display: fix dccg root clock optimization related hangQili Lu
[Why] enable dpp rcg before we disable dppclk in hw_init cause system hang/reboot [How] we remove dccg rcg related code from init into a separate function and call it after we init pipe Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Qili Lu <qili.lu@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-06drm/amd/display: Refactor dccg35_get_other_enabled_symclk_feNicholas Susanto
[Why] Function used to check the number of FEs connected to the current BE. This was then used to determine if the symclk could be disabled, if all FEs were disconnected. However, the function would skip over the primary FE and return 0 when the primary FE was still connected. This caused black screens on driver disable with an MST daisy chain hooked up. [How] Refactor the function to correctly return the number of FEs connected to the input BE. Also, rename it for clarity. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Nicholas Susanto <Nicholas.Susanto@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-02drm/amd/display: Fix flickering caused by dccgHansen Dsouza
Always allow un-gating. Follow legacy workaround for repeated dppclk dto updates Reviewed-by: Muhammad Ahmed <ahmed.ahmed@amd.com> Signed-off-by: Hansen Dsouza <Hansen.Dsouza@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-27drm/amd/display: guard write a 0 post_divider value to HWAhmed, Muhammad
[why] post_divider_value should not be 0. Reviewed-by: Charlene Liu <charlene.liu@amd.com> Signed-off-by: Ahmed, Muhammad <Ahmed.Ahmed@amd.com> Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-20Revert "drm/amd/display: Update to using new dccg callbacks"Hansen Dsouza
[Why] Revert updated DCCG wrappers due to regression [How] This reverts commit 680458d41aa46a009909482f58358205b5c4b438. Reviewed-by: Chris Park <chris.park@amd.com> Signed-off-by: Hansen Dsouza <Hansen.Dsouza@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-13drm/amd/display: Update to using new dccg callbacksHansen Dsouza
[Why and how] Update to using new dccg callbacks Reviewed-by: Chris Park <chris.park@amd.com> Signed-off-by: Hansen Dsouza <Hansen.Dsouza@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-06drm/amd/display: Add clock control callbacksHansen Dsouza
[why & how] Add clock source selection control functions based on spec Reviewed-by: Muhammad Ahmed <ahmed.ahmed@amd.com> Signed-off-by: Hansen Dsouza <Hansen.Dsouza@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-06drm/amd/display: Add clock control callbacksHansen Dsouza
[why & how] Add clock source selection an control functions based on spec Reviewed-by: Muhammad Ahmed <ahmed.ahmed@amd.com> Signed-off-by: Hansen Dsouza <Hansen.Dsouza@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-06drm/amd/display: Add stream and char control callbackHansen Dsouza
[why & how] Add new stream and char control functions based on DCCG spec Reviewed-by: Muhammad Ahmed <ahmed.ahmed@amd.com> Signed-off-by: Hansen Dsouza <Hansen.Dsouza@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-27drm/amd/display: Add new enable and disable functions for DCN35Hansen Dsouza
Add new enable and disable functions based on DCCG spec. Signed-off-by: Hansen Dsouza <Hansen.Dsouza@amd.com> Reviewed-by: Muhammad Ahmed <ahmed.ahmed@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-27drm/amd/display: Add new enable and disable functionsHansen Dsouza
Add new enable and disable functions based on DCCG spec. Signed-off-by: Hansen Dsouza <Hansen.Dsouza@amd.com> Reviewed-by: Muhammad Ahmed <ahmed.ahmed@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-23drm/amd/display: Add source select helper functionsHansen Dsouza
[why & how] Add source select helpers based on DCCG spec Reviewed-by: Daniel Miess <daniel.miess@amd.com> Signed-off-by: Hansen Dsouza <hansen.dsouza@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-23drm/amd/display: Add RCG helper functionsHansen Dsouza
[why & how] Add standard RCG helpers based on DCCG spec Reviewed-by: Daniel Miess <daniel.miess@amd.com> Reviewed-by: Muhammad Ahmed <ahmed.ahmed@amd.com> Signed-off-by: Hansen Dsouza <hansen.dsouza@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-23drm/amd/display: Add private data type for RCGHansen Dsouza
[why & how] Add private data types for better RCG control Reviewed-by: Chris Park <chris.park@amd.com> Reviewed-by: Yihan Zhu <yihan.zhu@amd.com> Signed-off-by: Hansen Dsouza <hansen.dsouza@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-23drm/amd/display: fix dscclk programming sequence on DCN401Wenjing Liu
[why] The mux to switch between refclk and dto_dsc_clk is non double buffered. However dto dsc clk's phase and modulo divider registers are currently configured as double buffered update. This causes a problem when we switch to use dto dsc clk and program phase and modulo in the same sequence. In this sequence dsc clk is switched to dto but the clock divider programming doesn't take effect until next frame. When we try to program DSCC registers, SMN bus will hang because dto dsc clk divider phase is set to 0. [how] Configure phase and modulo to take effect immediately. Always switch to dto dsc clk before DSC clock is unagted. Switch back to refclk after DSC clock is gated. Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Reviewed-by: Jerry Zuo <jerry.zuo@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-06-27drm/amd/display: Refactor dccg401_get_other_enable_symclk_feRelja Vojvodic
[WHY] Function was used to check the number of FEs connected to the current BE. This was then used to determine if the symclk could be disabled, if all FEs were disconnected. However, the function would skip over the primary FE and return 0 when the primary FE was still connected. This caused black screens on driver disable with an MST daisy chain hooked up. [HOW] Refactored the function to correctly return the number of FEs connected to the input BE. Also renamed it for clarity. Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Relja Vojvodic <relja.vojvodic@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-06-14drm/amd/display: Fix incorrect size calculation for loop in dcn401Alex Hung
[WHY] fe_clk_en and be_clk_sel have size of 4 but sizeof(fe_clk_en) has byte size 16 which is lager than the array size. [HOW] Use ARRAY_SIZE for calculating size. This fixes 2 OVERRUN issues reported by Coverity. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-06-14drm/amd/display: Avoid programming DTO if Refclk is 0Chris Park
[Why] Reference clock, either DPREFCLK or DTBCLK can be a value of 0 which then will encounter division by 0. [How] Avoid further calculation and programming if refclk is not populated. Reviewed-by: Dillon Varone <dillon.varone@amd.com> Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Signed-off-by: Chris Park <chris.park@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-06-05drm/amd/display: Keep VBios pixel rate div setting until next mode setyi-lchen
[why] Vbios & Driver have difference pixel rate div policy. When enabling fast boot & performing blank & unblank w/o timing setting, pixel clock & pixel rate dividor are not match. It would cause too high pixel reate and eDP would be black screen. [How] We would keep pixel rate div setting by Vbios until next timing setting. Reviewed-by: Jun Lei <jun.lei@amd.com> Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Signed-off-by: yi-lchen <yi-lchen@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-05-20drm/amd/display: Adjust incorrect indentations and spacesAlex Hung
This fixes indentations and adjust spaces for better readability and code styles. Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-05-20drm/amd/display: Add missing enable and disable symclk_se functions for dcn401Wenjing Liu
The functions are missing. These two functions are required to support MST. Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-05-13Revert "drm/amd/display: Enable SYMCLK gating in DCCG"Alex Hung
This reverts commit c49e44ede5cdfe650c2f769d8bd58cbe289e87cd. This causes regression on DP link layer test. Reported-by: Mark Broadworth <Mark.Broadworth@amd.com> Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-05-13drm/amd/display: Enable SYMCLK gating in DCCGDaniel Miess
[WHY & HOW] Enable root clock optimization for SYMCLK and only disable it when it's actively used. Reviewed-by: Charlene Liu <charlene.liu@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Daniel Miess <daniel.miess@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit v1.2.3 (git 2.0.4) at 2026-03-25 02:25:12 +0000