| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"By the number of commits, cpufreq is the leading party (again) and the
most visible change there is the removal of the omap-cpufreq driver
that has not been used for a long time (good riddance). There are also
quite a few changes in the cppc_cpufreq driver, mostly related to
fixing its frequency invariance engine in the case when the CPPC
registers used by it are not in PCC. In addition to that, support for
AM62L3 is added to the ti-cpufreq driver and the cpufreq-dt-platdev
list is updated for some platforms. The remaining cpufreq changes are
assorted fixes and cleanups.
Next up is cpuidle and the changes there are dominated by intel_idle
driver updates, mostly related to the new command line facility
allowing users to adjust the list of C-states used by the driver.
There are also a few updates of cpuidle governors, including two menu
governor fixes and some refinements of the teo governor, and a
MAINTAINERS update adding Christian Loehle as a cpuidle reviewer.
[Thanks for stepping up Christian!]
The most significant update related to system suspend and hibernation
is the one to stop freezing the PM runtime workqueue during system PM
transitions which allows some deadlocks to be avoided. There is also a
fix for possible concurrent bit field updates in the core device
suspend code and a few other minor fixes.
Apart from the above, several drivers are updated to discard the
return value of pm_runtime_put() which is going to be converted to a
void function as soon as everybody stops using its return value, PL4
support for Ice Lake is added to the Intel RAPL power capping driver,
and there are assorted cleanups, documentation fixes, and some
cpupower utility improvements.
Specifics:
- Remove the unused omap-cpufreq driver (Andreas Kemnade)
- Optimize error handling code in cpufreq_boost_trigger_state() and
make cpufreq_boost_trigger_state() return -EOPNOTSUPP if no policy
supports boost (Lifeng Zheng)
- Update cpufreq-dt-platdev list for tegra, qcom, TI (Aaron Kling,
Dhruva Gole, and Konrad Dybcio)
- Minor improvements to the cpufreq and cpumask rust implementation
(Alexandre Courbot, Alice Ryhl, Tamir Duberstein, and Yilin Chen)
- Add support for AM62L3 SoC to the ti-cpufreq driver (Dhruva Gole)
- Update arch_freq_scale in the CPPC cpufreq driver's frequency
invariance engine (FIE) in scheduler ticks if the related CPPC
registers are not in PCC (Jie Zhan)
- Assorted minor cleanups and improvements in ARM cpufreq drivers
(Juan Martinez, Felix Gu, Luca Weiss, and Sergey Shtylyov)
- Add generic helpers for sysfs show/store to cppc_cpufreq (Sumit
Gupta)
- Make the scaling_setspeed cpufreq sysfs attribute return the actual
requested frequency to avoid confusion (Pengjie Zhang)
- Simplify the idle CPU time granularity test in the ondemand cpufreq
governor (Frederic Weisbecker)
- Enable asym capacity in intel_pstate only when CPU SMT is not
possible (Yaxiong Tian)
- Update the description of rate_limit_us default value in cpufreq
documentation (Yaxiong Tian)
- Add a command line option to adjust the C-states table in the
intel_idle driver, remove the 'preferred_cstates' module parameter
from it, add C-states validation to it and clean it up (Artem
Bityutskiy)
- Make the menu cpuidle governor always check the time till the
closest timer event when the scheduler tick has been stopped to
prevent it from mistakenly selecting the deepest available idle
state (Rafael Wysocki)
- Update the teo cpuidle governor to avoid making suboptimal
decisions in certain corner cases and generally improve idle state
selection accuracy (Rafael Wysocki)
- Remove an unlikely() annotation on the early-return condition in
menu_select() that leads to branch misprediction 100% of the time
on systems with only 1 idle state enabled, like ARM64 servers
(Breno Leitao)
- Add Christian Loehle to MAINTAINERS as a cpuidle reviewer
(Christian Loehle)
- Stop flagging the PM runtime workqueue as freezable to avoid system
suspend and resume deadlocks in subsystems that assume asynchronous
runtime PM to work during system-wide PM transitions (Rafael
Wysocki)
- Drop redundant NULL pointer checks before acomp_request_free() from
the hibernation code handling image saving (Rafael Wysocki)
- Update wakeup_sources_walk_start() to handle empty lists of wakeup
sources as appropriate (Samuel Wu)
- Make dev_pm_clear_wake_irq() check the power.wakeirq value under
power.lock to avoid race conditions (Gui-Dong Han)
- Avoid bit field races related to power.work_in_progress in the core
device suspend code (Xuewen Yan)
- Make several drivers discard pm_runtime_put() return value in
preparation for converting that function to a void one (Rafael
Wysocki)
- Add PL4 support for Ice Lake to the Intel RAPL power capping driver
(Daniel Tang)
- Replace sprintf() with sysfs_emit() in power capping sysfs show
functions (Sumeet Pawnikar)
- Make dev_pm_opp_get_level() return value match the documentation
after a previous update of the latter (Aleks Todorov)
- Use scoped for each OF child loop in the OPP code (Krzysztof
Kozlowski)
- Fix a bug in an example code snippet and correct typos in the
energy model management documentation (Patrick Little)
- Fix miscellaneous problems in cpupower (Kaushlendra Kumar):
* idle_monitor: Fix incorrect value logged after stop
* Fix inverted APERF capability check
* Use strcspn() to strip trailing newline
* Reset errno before strtoull()
* Show C0 in idle-info dump
- Improve cpupower installation procedure by making the systemd step
optional and allowing users to disable the installation of
systemd's unit file (João Marcos Costa)"
* tag 'pm-6.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (65 commits)
PM: sleep: core: Avoid bit field races related to work_in_progress
PM: sleep: wakeirq: harden dev_pm_clear_wake_irq() against races
cpufreq: Documentation: Update description of rate_limit_us default value
cpufreq: intel_pstate: Enable asym capacity only when CPU SMT is not possible
PM: wakeup: Handle empty list in wakeup_sources_walk_start()
PM: EM: Documentation: Fix bug in example code snippet
Documentation: Fix typos in energy model documentation
cpuidle: governors: teo: Refine intercepts-based idle state lookup
cpuidle: governors: teo: Adjust the classification of wakeup events
cpufreq: ondemand: Simplify idle cputime granularity test
cpufreq: userspace: make scaling_setspeed return the actual requested frequency
PM: hibernate: Drop NULL pointer checks before acomp_request_free()
cpufreq: CPPC: Add generic helpers for sysfs show/store
cpufreq: scmi: Fix device_node reference leak in scmi_cpu_domain_id()
cpufreq: ti-cpufreq: add support for AM62L3 SoC
cpufreq: dt-platdev: Add ti,am62l3 to blocklist
cpufreq/amd-pstate: Add comment explaining nominal_perf usage for performance policy
cpufreq: scmi: correct SCMI explanation
cpufreq: dt-platdev: Block the driver from probing on more QC platforms
rust: cpumask: rename methods of Cpumask for clarity and consistency
...
|
|
Make sure to drop the reference taken to the DDC device during probe on
probe failure (e.g. probe deferral) and on driver unbind.
Fixes: fcbc51e54d2a ("staging: drm/imx: Add support for Television Encoder (TVEv2)")
Cc: stable@vger.kernel.org # 3.10
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20251030163456.15807-1-johan@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
Multiple DRM drivers use the pm_runtime_put() return value for printing
debug or even error messages and all of those messages are at least
somewhat misleading.
Returning an error code from pm_runtime_put() merely means that it has
not queued up a work item to check whether or not the device can be
suspended and there are many perfectly valid situations in which that
can happen, like after writing "on" to the devices' runtime PM "control"
attribute in sysfs for one example. It also happens when the kernel
has been configured with CONFIG_PM unset.
For this reason, modify all of those drivers to simply discard the
pm_runtime_put() return value which is what they should be doing.
This will facilitate a planned change of the pm_runtime_put() return
type to void in the future.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patch.msgid.link/2256082.irdbgypaU6@rafael.j.wysocki
|
|
Linux 6.18-rc6
Backmerge in order to merge msm next
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
Align pitch to multiples of 8 pixels for bpp values that do not map
to RGB formats. The call to drm_driver_color_mode_format() fails with
DRM_INVALID_FORMAT in these cases. Fall back to manually computing
the pitch alignment from which drm_mode_size_dumb() can compute the
correct pitch.
Fixes userspace that allocates dumb buffers for YUV formats, where
bpp equals 12. A common example is the IGT kms_getfb test.
v2:
- ignore width in calculation
Suggested-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: b1d0e470f881 ("drm/imx/ipuv3: Compute dumb-buffer sizes with drm_mode_size_dumb()")
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: dri-devel@lists.freedesktop.org
Cc: imx@lists.linux.dev
Cc: linux-arm-kernel@lists.infradead.org
Tested-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://patch.msgid.link/20251104153832.189666-1-tzimmermann@suse.de
|
|
There are a gazillion files that depend on drm_print.h being indirectly
included via drm_buddy.h, drm_mm.h, or ttm/ttm_resource.h. In
preparation for removing those includes, explicitly include drm_print.h
where needed.
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/5fe67395907be33eb5199ea6d540e29fddee71c8.1761734313.git.jani.nikula@intel.com
|
|
Invoking drm_bridge_add() is good practice, so add it to this driver.
Link: https://lore.kernel.org/all/DDHZ5GO9MPF0.CGYTVBI74FOZ@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Reviewed-by: Louis Chauvet <louis.chauvet@bootlin.com>
Link: https://patch.msgid.link/20251014-drm-bridge-alloc-imx-ipuv3-v1-2-a1bb1dcbff50@bootlin.com
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
This is the new API for allocating DRM bridges.
This conversion was missed during the initial conversion of all bridges to
the new API. Thus all kernels with commit 94d50c1a2ca3 ("drm/bridge:
get/put the bridge reference in drm_bridge_attach/detach()") and using this
driver now warn due to drm_bridge_attach() incrementing the refcount, which
is not initialized without using devm_drm_bridge_alloc() for allocation.
To make the conversion simple and straightforward without messing up with
the drmm_simple_encoder_alloc(), move the struct drm_bridge from struct
imx_parallel_display_encoder to struct imx_parallel_display.
Also remove the 'struct imx_parallel_display *pd' from struct
imx_parallel_display_encoder, not needed anymore.
Fixes: 94d50c1a2ca3 ("drm/bridge: get/put the bridge reference in drm_bridge_attach/detach()")
Reported-by: Ernest Van Hoecke <ernestvanhoecke@gmail.com>
Closes: https://lore.kernel.org/all/hlf4wdopapxnh4rekl5s3kvoi6egaga3lrjfbx6r223ar3txri@3ik53xw5idyh/
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Reviewed-by: Louis Chauvet <louis.chauvet@bootlin.com>
Tested-by: Ernest Van Hoecke <ernest.vanhoecke@toradex.com>
Link: https://patch.msgid.link/20251014-drm-bridge-alloc-imx-ipuv3-v1-1-a1bb1dcbff50@bootlin.com
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
The driver has never supported anything but OF probe so drop the unused
platform module alias incorrectly added by commit b2da05ff4797
("imx-drm: parallel-display: Add MODULE_ALIAS()")
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20250924092643.26113-5-johan@kernel.org
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
The driver has never supported anything but OF probe so drop the
unused platform module alias incorrectly added by commit 52db752c3de5
("imx-drm: imx-tve: Add MODULE_ALIAS()").
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20250924092643.26113-4-johan@kernel.org
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
The driver has never supported anything but OF probe so drop the unused
platform module alias incorrectly added by commit bc627387a951
("imx-drm: imx-ldb: Add MODULE_ALIAS()").
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20250924092643.26113-3-johan@kernel.org
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
The driver has never supported anything but OF probe so drop the unused
platform module alias which was incorrectly added by commit 3d1b35a3d9f3
("drm: imx: imx-hdmi: convert imx-hdmi to drm_bridge mode").
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20250924092643.26113-2-johan@kernel.org
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
Consistently sort bits and bitfields from highest to lowest bits.
No functional change.
Signed-off-by: Marek Vasut <marek.vasut@mailbox.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Liu Ying <victor.liu@nxp.com>
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Link: https://lore.kernel.org/r/20251014114148.43922-1-marek.vasut@mailbox.org
|
|
The imx-ipuv3 atomic_check implementation uses the deprecated
drm_atomic_get_existing_crtc_state() helper.
This hook is called as part of the global atomic_check, thus before the
states are swapped. The existing state thus points to the new state, and
we can use drm_atomic_get_new_crtc_state() instead.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://lore.kernel.org/r/20250930-drm-no-more-existing-state-v5-19-eeb9e1287907@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
The imx-dcss atomic_check implementation uses the deprecated
drm_atomic_get_existing_crtc_state() helper.
This hook is called as part of the global atomic_check, thus before the
states are swapped. The existing state thus points to the new state, and
we can use drm_atomic_get_new_crtc_state() instead.
Reviewed-by: Laurentiu Palcu <laurentiu.palcu@oss.nxp.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://lore.kernel.org/r/20250930-drm-no-more-existing-state-v5-18-eeb9e1287907@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
The imx-dc atomic_check implementation uses the deprecated
drm_atomic_get_existing_crtc_state() helper.
This hook is called as part of the global atomic_check, thus before the
states are swapped. The existing state thus points to the new state, and
we can use drm_atomic_get_new_crtc_state() instead.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Liu Ying <victor.liu@nxp.com>
Link: https://lore.kernel.org/r/20250930-drm-no-more-existing-state-v5-17-eeb9e1287907@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
Call drm_mode_size_dumb() to compute dumb-buffer scanline pitch and
buffer size. The hardware requires the framebuffer width to be a
multiple of 8. The scanline pitch has to be large enough to support
this. Therefore compute the byte size of 8 pixels in the given color
mode and align the pitch accordingly.
v5:
- fix typo in commit description
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20250821081918.79786-11-tzimmermann@suse.de
|
|
Call drm_mode_size_dumb() to compute dumb-buffer scanline pitch and
buffer size. Align the pitch to a multiple of 8.
Push the current calculation into the only direct caller imx. Imx's
hardware requires the framebuffer width to be aligned to 8. The
driver's current approach is actually incorrect, as it only guarantees
this implicitly and requires bpp to be a multiple of 8 already. A
later commit will fix this problem by aligning the scanline pitch
such that an aligned width still fits into each scanline's memory.
A number of other drivers are build on top of gem-dma helpers and
implement their own dumb-buffer allocation. These drivers invoke
drm_gem_dma_dumb_create_internal(), which is not affected by this
commit.
v5:
- avoid reset of arguments (Tomi)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://lore.kernel.org/r/20250821081918.79786-4-tzimmermann@suse.de
|
|
drm_bridge_get_next_bridge()
The bridge returned by drm_bridge_get_next_bridge() is refcounted. Put it
when done. We need to ensure it is not put before either next_bridge or
next_bridge_state is in use, thus for simplicity use a cleanup action.
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://lore.kernel.org/r/20250801-drm-bridge-alloc-getput-drm_bridge_get_next_bridge-v2-9-888912b0be13@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
|
|
The round_rate() clk ops is deprecated, so migrate this driver from
round_rate() to determine_rate() using the Coccinelle semantic patch
on the cover letter of this series.
Signed-off-by: Brian Masney <bmasney@redhat.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20250811-drm-clk-round-rate-v2-1-4a91ccf239cf@redhat.com
Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
|
|
i.MX8qxp Display Controller(DC) is comprised of three main components that
include a blit engine for 2D graphics accelerations, display controller for
display output processing, as well as a command sequencer. Add kernel
mode setting support for the display controller part with two CRTCs and
two primary planes(backed by FetchLayer and FetchWarp respectively). The
registers of the display controller are accessed without command sequencer
involved, instead just by using CPU. The command sequencer is supposed to
be used by the blit engine.
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Link: https://lore.kernel.org/r/20250414035028.1561475-13-victor.liu@nxp.com
|
|
i.MX8qxp Display Controller has a built-in interrupt controller to support
Enable/Status/Preset/Clear interrupt bit. Add driver for it.
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Link: https://lore.kernel.org/r/20250414035028.1561475-12-victor.liu@nxp.com
|
|
i.MX8qxp Display Controller pixel engine consists of all processing
units that operate in the AXI bus clock domain. Add drivers for
ConstFrame, ExtDst, FetchLayer, FetchWarp and LayerBlend units, as
well as a pixel engine driver, so that two displays with primary
planes can be supported. The pixel engine driver and those unit
drivers are components to be aggregated by a master registered in
the upcoming DRM driver.
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250414035028.1561475-11-victor.liu@nxp.com
|
|
i.MX8qxp Display Controller display engine consists of all processing
units that operate in a display clock domain. Add minimal feature
support with FrameGen and TCon so that the engine can output display
timings. The FrameGen driver, TCon driver and display engine driver
are components to be aggregated by a master registered in the upcoming
DRM driver.
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250414035028.1561475-10-victor.liu@nxp.com
|
|
The drm_bridge structure contains an encoder pointer that is widely used
by bridge drivers. This pattern is largely documented as deprecated in
other KMS entities for atomic drivers.
However, one of the main use of that pointer is done in attach to just
call drm_bridge_attach on the next bridge to add it to the bridge list.
While this dereferences the bridge->encoder pointer, it's effectively
the same encoder the bridge was being attached to.
We can make it more explicit by adding the encoder the bridge is
attached to to the list of attach parameters. This also removes the need
to dereference bridge->encoder in most drivers.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250313-bridge-connector-v6-1-511c54a604fb@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
The mode_valid() callbacks of drm_encoder, drm_crtc and drm_bridge
take a const struct drm_display_mode argument. Change the mode_valid
callback of drm_connector to also take a const argument.
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Raphael Gallais-Pou <rgallaispou@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241214-drm-connector-mode-valid-const-v2-5-4f9498a4c822@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
The v6.13-rc2 release included a bunch of breaking changes,
specifically the MODULE_IMPORT_NS commit.
Backmerge in order to fix them before the next pull-request.
Include the fix from Stephen Roswell.
Caused by commit
25c3fd1183c0 ("drm/virtio: Add a helper to map and note the dma addrs and lengths")
Interacting with commit
cdd30ebb1b9f ("module: Convert symbol namespace to string literal")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Link: https://patchwork.freedesktop.org/patch/msgid/20241209121717.2abe8026@canb.auug.org.au
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
|
|
We stopped using the driver initialized date in commit 7fb8af6798e8
("drm: deprecate driver date") and (eventually) started returning "0"
for drm_version ioctl instead.
Finish the job, and remove the unused date member from struct
drm_driver, its initialization from drivers, along with the common
DRIVER_DATE macros.
v2: Also update drivers/accel (kernel test robot)
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Simon Ser <contact@emersion.fr>
Acked-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> # msm
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/1f2bf2543aed270a06f6c707fd6ed1b78bf16712.1733322525.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
The continual trickle of small conversion patches is grating on me, and
is really not helping. Just get rid of the 'remove_new' member
function, which is just an alias for the plain 'remove', and had a
comment to that effect:
/*
* .remove_new() is a relic from a prototype conversion of .remove().
* New drivers are supposed to implement .remove(). Once all drivers are
* converted to not use .remove_new any more, it will be dropped.
*/
This was just a tree-wide 'sed' script that replaced '.remove_new' with
'.remove', with some care taken to turn a subsequent tab into two tabs
to make things line up.
I did do some minimal manual whitespace adjustment for places that used
spaces to line things up.
Then I just removed the old (sic) .remove_new member function, and this
is the end result. No more unnecessary conversion noise.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Move the public header file drm_client_setup.h to the clients/
subdirectory and update all drivers. No functional changes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241108154600.126162-3-tzimmermann@suse.de
|
|
Compile-testing random configurations leads to failures in
dcss-kms.c from a missing declaration:
drivers/gpu/drm/imx/dcss/dcss-kms.c:95:8: error: use of undeclared identifier 'drm_bridge_attach'
95 | ret = drm_bridge_attach(encoder, bridge, NULL,
| ^
drivers/gpu/drm/imx/dcss/dcss-kms.c:96:5: error: use of undeclared identifier 'DRM_BRIDGE_ATTACH_NO_CONNECTOR'
96 | DRM_BRIDGE_ATTACH_NO_CONNECTOR);
| ^
Include the header directly.
Fixes: 004555a18d57 ("drm/imx/dcss: Allow build with COMPILE_TEST=y")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20241028163527.2425783-1-arnd@kernel.org
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
|
|
Compile-testing random configurations leads to failures in
dcss-kms.c from a missing declaration:
drivers/gpu/drm/imx/dcss/dcss-kms.c:95:8: error: use of undeclared identifier 'drm_bridge_attach'
95 | ret = drm_bridge_attach(encoder, bridge, NULL,
| ^
drivers/gpu/drm/imx/dcss/dcss-kms.c:96:5: error: use of undeclared identifier 'DRM_BRIDGE_ATTACH_NO_CONNECTOR'
96 | DRM_BRIDGE_ATTACH_NO_CONNECTOR);
| ^
Include the header directly.
Fixes: 004555a18d57 ("drm/imx/dcss: Allow build with COMPILE_TEST=y")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241028163527.2425783-1-arnd@kernel.org
|
|
Allow imx/dcss to be built with COMPILE_TEST=y for greater
coverage. Builds fine on x86/x86_64 at least.
Cc: Laurentiu Palcu <laurentiu.palcu@oss.nxp.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241003111851.10453-8-ville.syrjala@linux.intel.com
Reviewed-by: Laurentiu Palcu <laurentiu.palcu@oss.nxp.com>
|
|
Use the appropriate 64bit division helpers to make the code
build on 32bit architectures.
Cc: Laurentiu Palcu <laurentiu.palcu@oss.nxp.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241003111851.10453-7-ville.syrjala@linux.intel.com
Reviewed-by: Laurentiu Palcu <laurentiu.palcu@oss.nxp.com>
|
|
The driver now uses the legacy bridge helper code but can be configured
to get built without it:
ERROR: modpost: "devm_imx_drm_legacy_bridge" [drivers/gpu/drm/imx/ipuv3/parallel-display.ko] undefined!
Add the required dependency, same as in the ldb driver.
Fixes: f94b9707a1c9 ("drm/imx: parallel-display: switch to imx_legacy_bridge / drm_bridge_connector")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241015073004.4066457-1-arnd@kernel.org
|
|
Call drm_client_setup() to run the kernel's default client setup
for DRM. Set fbdev_probe in struct drm_driver, so that the client
setup can start the common fbdev client.
v5:
- select DRM_CLIENT_SELECTION
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Fabio Estevam <festevam@gmail.com>
Acked-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240924071734.98201-22-tzimmermann@suse.de
|
|
Call drm_client_setup_with_color_mode() to run the kernel's default
client setup for DRM. Set fbdev_probe in struct drm_driver, so that
the client setup can start the common fbdev client.
v5:
- select DRM_CLIENT_SELECTION
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Fabio Estevam <festevam@gmail.com>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240924071734.98201-21-tzimmermann@suse.de
|
|
Call drm_client_setup() to run the kernel's default client setup
for DRM. Set fbdev_probe in struct drm_driver, so that the client
setup can start the common fbdev client.
The dcss driver specifies a preferred color mode of 32. As this
is the default if no format has been given, leave it out entirely.
v5:
- select DRM_CLIENT_SELECTION
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Laurentiu Palcu <laurentiu.palcu@oss.nxp.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Fabio Estevam <festevam@gmail.com>
Acked-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240924071734.98201-20-tzimmermann@suse.de
|
|
When drm/bridge-connector was moved to DRM_DISPLAY_HELPER not all
users were updated. Add missing Kconfig selections.
Fixes: 9da7ec9b19d8 ("drm/bridge-connector: move to DRM_DISPLAY_HELPER module")
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240906063857.2223442-1-alexander.stein@ew.tq-group.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
disable_irq() after request_irq() still has a time gap in which
interrupts can come. request_irq() with IRQF_NO_AUTOEN flag will
disable IRQ auto-enable when request IRQ.
Fixes: 47b1be5c0f4e ("staging: imx/drm: request irq only after adding the crtc")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240912083020.3720233-4-ruanjinjie@huawei.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
disable_irq() after request_irq() still has a time gap in which
interrupts can come. request_irq() with IRQF_NO_AUTOEN flag will
disable IRQ auto-enable when request IRQ.
Fixes: 9021c317b770 ("drm/imx: Add initial support for DCSS on iMX8MQ")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Laurentiu Palcu <laurentiu.palcu@oss.nxp.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240912083020.3720233-3-ruanjinjie@huawei.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
disable_irq() after request_irq() still has a time gap in which
interrupts can come. request_irq() with IRQF_NO_AUTOEN flag will
disable IRQ auto-enable when request IRQ.
Fixes: 9021c317b770 ("drm/imx: Add initial support for DCSS on iMX8MQ")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Laurentiu Palcu <laurentiu.palcu@oss.nxp.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240912083020.3720233-2-ruanjinjie@huawei.com
[DB: fixed the subject]
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Backmerging to get fixes from v6.12-rc7.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
|
|
Thomas needs 5a498d4d06d6 ("drm/fbdev-dma: Only install deferred I/O
if necessary") in drm-misc, so start the backmerge cascade.
Signed-off-by: Simona Vetter <simona.vetter@ffwll.ch>
|
|
drm_bridge_connector is a "leaf" driver, belonging to the display
helper, rather than the "CRTC" drm_kms_helper module. Move the driver
to the drm/display and add necessary Kconfig selection clauses.
Suggested-by: Maxime Ripard <mripard@kernel.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240903-drm-bridge-connector-fix-hdmi-reset-v5-2-daebde6d9857@linaro.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
The imx-tve driver is the only remaining user of
imx_drm_connector_destroy(). Move the function to imx-tve.c
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Rob Herring <robh@kernel.org>
Tested-by: Chris Healy <cphealy@gmail.com>
Tested-by: Philipp Zabel <p.zabel@pengutronix.de> # on imx6q-nitrogen6x
Link: https://patchwork.freedesktop.org/patch/msgid/20240602-drm-imx-cleanup-v3-12-e549e2a43100@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Use the imx_legacy bridge driver instead of handlign display modes via
the connector node.
All existing usecases already support attaching using
the DRM_BRIDGE_ATTACH_NO_CONNECTOR flag, while the imx_legacy bridge
doesn't support creating connector at all. Switch to
drm_bridge_connector at the same time.
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Tested-by: Chris Healy <cphealy@gmail.com>
Tested-by: Philipp Zabel <p.zabel@pengutronix.de> # on imx6q-nitrogen6x
Link: https://patchwork.freedesktop.org/patch/msgid/20240602-drm-imx-cleanup-v3-11-e549e2a43100@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Use the imx_legacy bridge driver instead of handlign display modes via
the connector node.
All existing usecases already support attaching using
the DRM_BRIDGE_ATTACH_NO_CONNECTOR flag, while the imx_legacy bridge
doesn't support creating connector at all. Switch to
drm_bridge_connector at the same time.
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Tested-by: Chris Healy <cphealy@gmail.com>
Tested-by: Philipp Zabel <p.zabel@pengutronix.de> # on imx6q-nitrogen6x
Link: https://patchwork.freedesktop.org/patch/msgid/20240602-drm-imx-cleanup-v3-10-e549e2a43100@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Defer panel handling to drm_panel_bridge, unifying codepaths for the
panel and bridge cases.
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Tested-by: Chris Healy <cphealy@gmail.com>
Tested-by: Philipp Zabel <p.zabel@pengutronix.de> # on imx6q-nitrogen6x
Link: https://patchwork.freedesktop.org/patch/msgid/20240602-drm-imx-cleanup-v3-8-e549e2a43100@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Defer panel handling to drm_panel_bridge, unifying codepaths for the
panel and bridge cases. The MFD_SYSCON symbol is moved to select to
prevent Kconfig symbol loops.
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Tested-by: Chris Healy <cphealy@gmail.com>
Tested-by: Philipp Zabel <p.zabel@pengutronix.de> # on imx6q-nitrogen6x
Link: https://patchwork.freedesktop.org/patch/msgid/20240602-drm-imx-cleanup-v3-7-e549e2a43100@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
