| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull Android/IIO fixes from Greg KH:
"Here is a set of bugfixes for 7.2-rc3 that resolve a bunch of reported
issues in just the binder and iio codebases. Included in here are:
- binder driver bugfixes for both the rust and c versions for
reported problems
- lots and lots of iio driver bugfixes for lots of reported issues
(including a hid sensor driver bugfix)
Full details are in the shortlog, all of these have been in linux-next
with no reported issues"
* tag 'char-misc-7.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (36 commits)
iio: event: Fix event FIFO reset race
iio: imu: inv_icm42600: fix timestamp clock period by using lower value
iio: light: al3010: fix incorrect scale for the highest gain range
iio: adc: nxp-sar-adc: Fix the delay calculation in nxp_sar_adc_wait_for()
iio: light: tsl2591: return actual error from probe IRQ failure
iio: imu: inv_icm42600: fix timestamping by limiting FIFO reading
iio: imu: st_lsm6dsx: deselect shub page before reading whoami
rust_binder: clear freeze listener on node removal
rust_binder: reject context manager self-transaction
rust_binder: use a u64 stride when cleaning up the offsets array
binder: fix UAF in binder_free_transaction()
binder: fix UAF in binder_thread_release()
rust_binder: synchronize Rust Binder stats with freeze commands
binder: cache secctx size before release zeroes it
rust_binder: fix BINDER_GET_EXTENDED_ERROR
iio: adc: ad7779: add missing 'select IIO_TRIGGERED_BUFFER' to Kconfig
iio: adc: ad4130: add missing `select IIO_TRIGGERED_BUFFER` to Kconfig
iio: adc: ti-ads124s08: Return reset GPIO lookup errors
iio: temperature: Build mlx90635 with CONFIG_MLX90635
iio: light: al3320a: add missing REGMAP_I2C to Kconfig
...
|
|
files)
Replace the #include of <linux/mod_devicetable.h> by the more specific
<linux/device-id/*.h> where applicable. For most cases the include
can be dropped completely, only a few drivers need one or two headers
added.
Acked-by: Danilo Krummrich <dakr@kernel.org>
Acked-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/1a3f2007c5c5dcf555c09a4035ce3ae8ef1b6c49.1782808461.git.u.kleine-koenig@baylibre.com
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
|
|
Ensure that if a device has Vref1 but reading the regulator returns an
error, mcp47feb02_init_ctrl_regs() is not called with an uninitialized
vref1_uV value. Also add a device_property_present() check for the Vref1
supply before reading the regulator.
Fixes: dd154646d292 ("iio: dac: mcp47feb02: Fix Vref validation [1-999] case")
Reported-by: Dan Carpenter <error27@gmail.com>
Closes: https://lore.kernel.org/all/adiPnla0M5EzvgD-@stanley.mountain/
Signed-off-by: Ariana Lazar <ariana.lazar@microchip.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next
IIO: 2nd set of fixes for the 7.1 cycle.
Usual mixed bag of ancient issues and the recently introduced.
Various drivers
- Ensure use of simple_write_to_buffer() in debugfs callbacks doesn't
result in reading off the end of intended data by checking the
position is always 0.
buffer/hw-consumer
- Ensure scan_mask is freed on buffer release.
acpi-als
- Check ACPI_COMPANION() against NULL to close corner case where a
driver is overridden.
adi,ad4062
- Add GPIOLIB dependency to avoid undefined ref to gpiochip_get_data()
adi.ad7768-1
- Add GPIOLIB dependency to avoid several undefined functions.
adi,ad2s1210
- Ensure possible recovery path if a read fails in the interrupt handler.
bosch,bmg160
- Increase sleep on startup to ensure device is ready.
bosch,bmp280
- Ensure buffer pushed to kfifo is zeroed to avoid leaking uninitialized
stack data to userspace.
dyna-image,al3010
- Fix refactor that stopped reading one of the two measurement registers.
dyna-image,al3320a
- Fix refactor that stopped reading one of the two measurement registers.
qcom,spmi-iadc
- Ensure disable_irq_wake() is called on remove path.
sensiron,scd30
- Fix a sign extension bug.
st,vl5310x
- Ensure possible recovery path if a read fails in the interrupt handler.
ti,adc1298
- Bounds check for pga_settings index. Hardening against device returning
unexpected values.
ti,tmp006
- Ensure trigger correctly released on remove path.
vishay,veml6030
- Fix incorrect channel type in events.
vishay,veml6074
- Bounds check for veml6075_it_ms. Hardening against device returning
unexpected values.
* tag 'iio-fixes-for-7.1b' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (23 commits)
iio: adc: ad_sigma_delta: fix clear_pending_event for registerless devices
iio: adc: ad_sigma_delta: fix CS held asserted and state leaks
iio: light: opt3001: fix missing state reset on timeout
iio: chemical: scd30: Cleanup initializations and fix sign-extension bug
iio: core: fix uninitialized data in debugfs
iio: backend: fix uninitialized data in debugfs
iio: dac: ad3552r-hs: fix uninitialized data ni ad3552r_hs_write_data_source()
iio: adc: qcom-spmi-iadc: balance enable_irq_wake() on driver unbind
iio: light: al3320a: read both ALS ADC registers again
iio: light: al3010: read both ALS ADC registers again
iio: temperature: tmp006: use devm_iio_trigger_register
iio: buffer: hw-consumer: free scan_mask on buffer release
iio: adc: ad7768-1: Select GPIOLIB
iio: light: veml6030: fix channel type when pushing events
iio: light: acpi-als: Check ACPI_COMPANION() against NULL
iio: resolver: ad2s1210: notify trigger and clear state on fault read error
iio: proximity: vl53l0x: notify trigger and clear IRQ on error paths
iio: gyro: bmg160: wait full startup time after mode change at probe
iio: gyro: bmg160: bail out when bandwidth/filter is not in table
iio: pressure: bmp280: zero-init bmp580 trigger handler buffer
...
|
|
Create struct with bus operations, which will be used to extend bus
implementation features. Auxiliary functions ad5686_write() and
ad5686_read() are created and ad5686_probe() now receives an ops struct
pointer rather than individual read and write functions.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Rodrigo Alencar <rodrigo.alencar@analog.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
|
|
Review documentation comment header for ad5686_chip_info and ad5686_state.
Update variable names and description and remove unnecessary blank line
between comment and struct declaration.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Rodrigo Alencar <rodrigo.alencar@analog.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
|
|
Create ad5310_control_sync() and ad5683_control_sync() functions that
properly consume the mask definitions with FIELD_PREP(). This allows to
reuse a function that updates the control register with cached values,
without relying on confusing logic that depends on st->use_internal_vref,
which is initialized earlier in ad5686_probe() because it is also
applicable to the AD5686_REGMAP case, removing the need for the
has_external_vref. Powerdown masks initialization is simplified as
*_control_sync() masks outs any unused bits for the single-channel case.
The change cleans up ad5686_write_dac_powerdown() and ad5686_probe(),
organizing the code for feature extension, e.g. gain control support for
single-channel devices.
Signed-off-by: Rodrigo Alencar <rodrigo.alencar@analog.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
|
|
Add ad5686_pd_field_set() and ad5686_pd_field_get() helpers to cleanup
powerdown mask control. Define AD5686_PD_* constants, e.g. AD5686_PD_MSK
to hold powerdown mask value for a single channel. AD5686_LDAC_PWRDN_*
macros are replaced by AD5686_PD_MODE_*, because they are unused and the
LDAC feature for async load of DAC channel values is not related to power
down control.
Signed-off-by: Rodrigo Alencar <rodrigo.alencar@analog.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
|
|
Add of_match table for the SPI device variants to be consistent with the
AD5696 I2C driver.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Rodrigo Alencar <rodrigo.alencar@analog.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
|
|
Split chip info table into separate structs and expose them to the spi
i2c drivers. That is the preferrable approach and allows for the drivers
to have knowledge of the device info before the common probe function gets
called. Those chip info structs may be shared by SPI and I2C driver
variants.
Channel declaration definitions are grouped according to channel count and
DECLARE_AD5693_CHANNELS() macro is renamed to DECLARE_AD5683_CHANNELS() to
match the regmap_type enum.
Use spi_get_device_match_data() and i2c_get_match_data() to get chip info
struct reference, passing it as parameter to the core probe function.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Rodrigo Alencar <rodrigo.alencar@analog.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
|
|
AD5683_REGMAP and AD5693_REGMAP behave the same way in the common code,
and that is because they target single channel devices from the same
sub-family. There is no reason to separate them and it will make things
simpler when refactoring the chip info table.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Rodrigo Alencar <rodrigo.alencar@analog.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
|
|
Apply IWYU principle, replacing unused/generic headers for
specific/missing headers. The resulting include directive lists are sorted
accordingly.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Rodrigo Alencar <rodrigo.alencar@analog.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
|
|
Linux 7.1-rc6
|
|
While being less compact, using named initializers allows to more easily
see which members of the structs are assigned which value without having
to lookup the declaration of the struct. And it's also more robust
against changes to the struct definition.
The mentioned robustness is relevant for a planned change to struct
i2c_device_id that replaces .driver_data by an anonymous union.
This patch doesn't modify the compiled arrays, only their representation
in source form benefits. The former was confirmed with x86 and arm64
builds.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Reviewed-by: Siratul Islam <email@sirat.me>
Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
|
|
The .driver_data member of the single i2c_device_id array entry is
unused in the driver. Drop it and also the then unused definition.
While at it, convert the i2c_device_id array to a better readable named
initializer.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
|
|
Replace &spi->dev with a local dev pointer to shorten lines, fix
alignment, and improve overall readability in the probe function.
Signed-off-by: Taha Ed-Dafili <0rayn.dev@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
|
|
Rearrange the include headers in alphabetical order to follow the
standard kernel coding style. This is a preparatory cleanup with
no functional changes.
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Taha Ed-Dafili <0rayn.dev@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
|
|
Add support for the Analog Devices AD5706R, a 4-channel 16-bit
current output digital-to-analog converter with SPI interface.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Alexis Czezar Torreno <alexisczezar.torreno@analog.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
|
|
If the *ppos value is non-zero then the simple_write_to_buffer() function
won't initialized the start of the buf[] buffer. Non-zero values for
*ppos won't work here generally, so just test for them and return -ENOSPC
at the start of the function.
Fixes: b1c5d68ea66e ("iio: dac: ad3552r-hs: add support for internal ramp")
Signed-off-by: Dan Carpenter <error27@gmail.com>
Reviewed-by: Angelo Dureghello <adureghello@baylibre.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
|
|
Fix powerdown control by using a proper bit shift for the powerdown mask
values. During initialization, powerdown bits are initialized so that
unused bits are set to 1 and the correct bit shift is used. Dual-channel
devices use one-hot encoding in the address and that reflects on the
position of the powerdown bits, which are not channel-index based
for that case. Quad-channel devices also use one-hot encoding for the
channel address but the result of log2(address) coincides with the channel
index value. Mask as 0x3U is used rather than 0x3, because shift can reach
value of 30 (last channel of a 16-channel device), which would mess with
the sign bit. The issue was introduced when first adding support for
dual-channel devices, which overlooked powerdown control differences.
Fixes: 7dc8faeab3e3 ("iio: dac: ad5686: add support for AD5338R")
Signed-off-by: Rodrigo Alencar <rodrigo.alencar@analog.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
|
|
Protect access of pwr_down_mode and pwr_down_mask fields with existing
mutex lock. Each channel exposes their own attributes for controlling
powerdown modes and powerdown state. This fixes potential race conditions
as those the write functions perform non-atomic read-modify-write
operations to those pwr_down_* fields. This issue exists since the ad5686
driver was first introduced.
Fixes: c2f37c8dcadc ("iio: dac: New driver for AD5686R, AD5685R, AD5684R Digital to analog converters")
Signed-off-by: Rodrigo Alencar <rodrigo.alencar@analog.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
|
|
The AD3531/AD3531R has different output operating modes from the
AD3530/AD3530R. According to the AD3531/AD3531R datasheet, the
powerdown modes are:
01: 500 Ohm output impedance
10: 3.85 kOhm output impedance
11: 16 kOhm output impedance
The driver currently uses the AD3530R modes (1k, 7.7k, 32k) for all
variants, which is incorrect for AD3531/AD3531R.
Add AD3531R-specific powerdown mode strings and assign them to the
AD3531/AD3531R chip variants.
Fixes: 93583174a3df ("iio: dac: ad3530r: Add driver for AD3530R and AD3531R")
Signed-off-by: Kim Seer Paller <kimseer.paller@analog.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
|
|
Fix range check for input raw value, which is off by one, i.e., for a
10-bit DAC the max valid value is 1023, but 1 << 10 equals 1024, which
passes the previous check, allowing an out-of-range write. The issue
exists since the ad5686 driver was first introduced.
Fixes: c2f37c8dcadc ("iio: dac: New driver for AD5686R, AD5685R, AD5684R Digital to analog converters")
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Rodrigo Alencar <rodrigo.alencar@analog.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
|
|
The reference bit position was ignored when writing the register at the
probe() function (!!val was used). When such bit is 1, internal voltage
reference is disabled so that an external one can be used. For
multi-channel devices, bit 0 of the Internal Reference Setup command
behaves the same way, so AD5686_REF_BIT_MSK is created. The issue exists
since support for single-channel devices were first introduced.
Fixes: be1b24d24541 ("iio:dac:ad5686: Add AD5691R/AD5692R/AD5693/AD5693R support")
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Rodrigo Alencar <rodrigo.alencar@analog.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
|
|
The function max5821_sync_powerdown_mode() returned the result of
i2c_master_send() directly. If a partial transfer occurred, it would
be incorrectly treated as a success by the caller.
While the caller currently handles the positive return value of 2 as
success, this patch refactors the function to return 0 on full success
and -EIO on short writes. This ensures robust error handling for
incomplete transfers and improves code maintainability by using
sizeof(outbuf).
Fixes: 472988972737 ("iio: add support of the max5821")
Signed-off-by: Salah Triki <salah.triki@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
|
|
Use devm_mutex_init() which is helpful with CONFIG_DEBUG_MUTEXES.
Signed-off-by: David Carlier <devnexen@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
|
|
Use devm_mutex_init() which is helpful with CONFIG_DEBUG_MUTEXES.
Signed-off-by: David Carlier <devnexen@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
|
|
Use devm_mutex_init() which is helpful with CONFIG_DEBUG_MUTEXES.
Signed-off-by: David Carlier <devnexen@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
|
|
Use devm_mutex_init() which is helpful with CONFIG_DEBUG_MUTEXES.
Signed-off-by: David Carlier <devnexen@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
|
|
Use devm_mutex_init() which is helpful with CONFIG_DEBUG_MUTEXES.
Signed-off-by: David Carlier <devnexen@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
|
|
Use devm_mutex_init() which is helpful with CONFIG_DEBUG_MUTEXES.
Signed-off-by: David Carlier <devnexen@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
|
|
Use field_get() for the per-channel DAC power-down bit instead of an
open-coded mask-and-shift sequence.
No functional change.
Signed-off-by: Piyush Patle <piyushpatle228@gmail.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
|
|
Add support for configuring the DAC gain using the GA bit
The MCP4821 supports two gain settings:
- 1x gain → 2.048V full-scale
- 2x gain → 4.096V full-scale
Scale write support is added in the IIO interface. Only scale
values advertised via the scale_available attribute are accepted,
ensuring consistency between the configured gain and exposed
scale values.
Signed-off-by: Nikhil Gautam <nikhilgtr@gmail.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
|
|
Move the iio_priv() call outside the switch statement in
mcp4821_read_raw() to avoid repeating it in multiple cases.
No functional change.
Signed-off-by: Nikhil Gautam <nikhilgtr@gmail.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
|
|
Fix a typo in the enum name mcp4821_supported_drvice_ids
by renaming it to mcp4821_supported_device_ids.
This improves code readability and consistency.
Signed-off-by: Nikhil Gautam <nikhilgtr@gmail.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
|
|
We need the char/misc/iio/comedi fixes in here as well for testing
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Parse optional maxim,rfs-ohms values to derive the per-channel output
current scale (mA per step) for the IIO current ABI.
Behavior changes:
- If maxim,rfs-ohms is present, IIO_CHAN_INFO_SCALE becomes available
and reports mA/step derived from Rfs.
- If maxim,rfs-ohms is missing, SCALE is not exposed to keep older DTs
working without requiring updates.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Refactor the driver to use the regmap API.
Replace the driver-specific mutex and manual shadow buffers with the
standard regmap infrastructure for locking and caching.
This ensures the cache is populated from hardware at probe, preventing
state desynchronization (e.g. across suspend/resume).
Define access tables to validate the different register maps of DS44x2
and DS44x4.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Sander Vanheule <sander@svanheule.net>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The DS4402/DS4404 variants operate with a 5-bit resolution (31 steps),
whereas the DS4422/DS4424 support 7-bit (127 steps).
Previously, the driver enforced a hardcoded 7-bit mask (DS4424_DAC_MASK)
for all variants. This allowed users to write values exceeding the 5-bit
range to DS4402/DS4404 devices, resulting in silent truncation or
undefined behavior.
Add a `result_mask` field to the chip_info structure to define the valid
data range for each variant. Use this mask to:
1. Correctly mask register values in read_raw().
2. Return -EINVAL in write_raw() if the input value exceeds the
variant's capabilities.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Add I2C/OF IDs for DS4402 and DS4404 and set the correct channel count.
Follow-up changes add per-variant scaling based on external Rfs.
Co-developed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: David Jander <david@protonic.nl>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The DS4422/DS4424 and DS4402/DS4404 datasheets do not specify a minimum
delay between power-up (POR) and the availability of the I2C interface.
The driver previously used `usleep_range(1000, 1200)` to enforce a ~1ms
delay. Replace this with `fsleep(1000)` to allow the kernel to select
the most efficient sleep mechanism while retaining the existing
conservative delay to ensure device readiness.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Refactor the driver to use device match data instead of checking ID enums
in a switch statement.
Define a `ds4424_chip_info` structure to hold variant-specific attributes
(currently just the channel count) and attach it directly to the I2C and
OF device ID tables.
This simplifies the probe function and makes it easier to add support for
new variants like DS4402/DS4404.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Rename the static `ds4424_info` structure to `ds4424_iio_info`.
The previous name was generic and could be confused with chip-specific
data structures (like the upcoming `ds4424_chip_info`). The new name
explicitly indicates that this structure holds the IIO framework
callbacks.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Sort the header inclusions alphabetically. This improves readability and
simplifies adding new includes in the future.
Group subsystem-specific headers (linux/iio/*) separately at the end
to clarify subsystem context.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Replace pr_err() with dev_err_ratelimited() in the RAW read path to avoid
log spam on repeated I2C failures and to include the device context.
Use %pe to print errno names for faster debugging. Use the parent
device context to identify the physical hardware causing the error.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Refactor the raw access logic to use standard GENMASK() and BIT()
macros. Use abs() for magnitude calculation to simplify the logic and
make the data flow clearer.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Linux 7.0-rc4
Required for the ds4422 series which is build upon;
5187e03b817c ("iio: dac: ds4424: reject -128 RAW value")
|
|
Return the error code from regmap_bulk_read() instead of 0 so
that I/O failures are properly propagated.
Fixes: cbbb819837f6 ("iio: dac: ad5770r: Add AD5770R support")
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Add support for the Linear Technology LTC2654 quad DAC family.
The LTC2654 is a 4-channel, 16-/12-bit DAC with SPI interface,
sharing the same 24-bit SPI protocol as the existing LTC2632/
LTC2634/LTC2636 devices supported by this driver.
The 12-bit variants of LTC2654 reuse existing LTC2634 chip_info
structs as they are register-compatible.
Add support for the following variants:
- LTC2654L-16: 16-bit, 2.5V internal reference
- LTC2654L-12: 12-bit, 2.5V internal reference
- LTC2654H-16: 16-bit, 4.096V internal reference
- LTC2654H-12: 12-bit, 4.096V internal reference
Signed-off-by: David Marinovic <david.marinovic@pupin.rs>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Remove the ltc2632_chip_info_tbl[] array and related
ltc2632_supported_device_ids enum used for looking up chip-specific
information. Instead, use separate static const struct
ltc2632_chip_info objects for each supported chip variant.
Suggested-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: David Marinovic <david.marinovic@pupin.rs>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
