| Age | Commit message (Collapse) | Author |
|---|
|
Some ULPs, e.g. rpcrdma, rely on drain_qp() to ensure all outstanding
requests are completed before releasing related memory. If drain_qp()
fails, ULPs may release memory directly, and in-flight WRs may later be
flushed after the memory is freed, potentially leading to UAF.
drain_qp() failures can happen when HW enters an error state or is
reset. Add support to drain SQ and RQ in such cases by posting a
fake WR during reset, so the driver can process all remaining WRs in
sequence and generate corresponding completions.
Always invoke comp_handler() in drain process to ensure completions
are not lost under concurrency (e.g. concurrent post_send() and
reset, or QPs created during reset). If the CQ is already processed,
cancel any already scheduled comp_handler() to avoid concurrency
issues.
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://patch.msgid.link/20260108113032.856306-1-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
The AH CQP command wait loop executes in an atomic context and was
using a fixed 1 ms delay. Since many AH create commands can complete
much faster than 1 ms, use poll_timeout_us_atomic with a 1 us delay.
Also, use the timeout value indicated during the capability exchange
rather than a hard-coded value.
Signed-off-by: Jacob Moroni <jmoroni@google.com>
Link: https://patch.msgid.link/20260105180550.2907858-1-jmoroni@google.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
A dma_wmb() is not necessary before a writel() because writel()
already has an even stronger store barrier. A dma_wmb() is only
required to order writes to consistent/DMA memory whereas the
barrier in writel() is specified to order writes to DMA memory as
well as MMIO.
Signed-off-by: Jacob Moroni <jmoroni@google.com>
Link: https://patch.msgid.link/20260103172517.2088895-1-jmoroni@google.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
rtrs_srv_change_state() returns bool (true on success) therefore
there is no reason to print error when it fails as it always will
be 0.
Signed-off-by: Grzegorz Prajsner <grzegorz.prajsner@ionos.com>
Signed-off-by: Md Haris Iqbal <haris.iqbal@ionos.com>
Link: https://patch.msgid.link/20260107161517.56357-11-haris.iqbal@ionos.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
When the connection establishment request is rejected from the server
side, then the actual error number sent back should be used.
Signed-off-by: Md Haris Iqbal <haris.iqbal@ionos.com>
Link: https://patch.msgid.link/20260107161517.56357-10-haris.iqbal@ionos.com
Reviewed-by: Grzegorz Prajsner <grzegorz.prajsner@ionos.com>
Reviewed-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Add HCA name and port of this HCA.
This would help with analysing and debugging the logs.
The logs would looks something like this,
rtrs_server L2516: Handling event: port error (10).
HCA name: mlx4_0, port num: 2
rtrs_client L3326: Handling event: port error (10).
HCA name: mlx4_0, port num: 1
Signed-off-by: Kim Zhu <zhu.yanjun@ionos.com>
Signed-off-by: Md Haris Iqbal <haris.iqbal@ionos.com>
Signed-off-by: Grzegorz Prajsner <grzegorz.prajsner@ionos.com>
Link: https://patch.msgid.link/20260107161517.56357-9-haris.iqbal@ionos.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Excessive error logging is making it difficult to identify the root
cause of issues. Implement rate limiting to improve log clarity.
Signed-off-by: Kim Zhu <zhu.yanjun@ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Grzegorz Prajsner <grzegorz.prajsner@ionos.com>
Link: https://patch.msgid.link/20260107161517.56357-8-haris.iqbal@ionos.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
During several network incidents, a number of RTRS paths for a session
went through disconnect and reconnect phase. However, some of those did
not auto-reconnect successfully. Instead they failed with the following
logs,
On client,
kernel: rtrs_client L1991: <sess-name>: Connect rejected: status 28
(consumer defined), rtrs errno -104
kernel: rtrs_client L2698: <sess-name>: init_conns() failed: err=-104
path=gid:<gid1>@gid:<gid2> [mlx4_0:1]
On server, (log a)
kernel: ibtrs_server L1868: <>: Connection already exists: 0
When the misbehaving path was removed, and add_path was called to re-add
the path, the log on client side changed to, (log b)
kernel: rtrs_client L1991: <sess-name>: Connect rejected: status 28
(consumer defined), rtrs errno -17
There was no log on the server side for this, which is expected since
there is no logging in that path,
if (unlikely(__is_path_w_addr_exists(srv, &cm_id->route.addr))) {
err = -EEXIST;
goto err;
Because of the following check on server side,
if (unlikely(sess->state != IBTRS_SRV_CONNECTING)) {
ibtrs_err(s, "Session in wrong state: %s\n",
.. we know that the path in (log a) was in CONNECTING state.
The above state of the path persists for as long as we leave the session
be. This means that the path is in some zombie state, probably waiting
for the info_req packet to arrive, which never does.
The changes in this commits does 2 things.
1) Add logs at places where we see the errors happening. The logs would
shed more light at the state and lifetime of such zombie paths.
2) Close such zombie sessions, only if they are in CONNECTING state, and
after an inactivity period of 30 seconds.
i) The state check prevents closure of paths which are CONNECTED.
Also, from the above logs and code, we already know that the path could
only be on CONNECTING state, so we play safe and narrow our impact surface
area by closing only CONNECTING paths.
ii) The inactivity period is to allow requests for other cid to finish
processing, or for any stray packets to arrive/fail.
Signed-off-by: Md Haris Iqbal <haris.iqbal@ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Grzegorz Prajsner <grzegorz.prajsner@ionos.com>
Link: https://patch.msgid.link/20260107161517.56357-7-haris.iqbal@ionos.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Remove unused members from rtrs_clt_io_req.
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Grzegorz Prajsner <grzegorz.prajsner@ionos.com>
Link: https://patch.msgid.link/20260107161517.56357-6-haris.iqbal@ionos.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
The member variable status in the struct rdma_cm_event is used for both
linux errors and the errors definded in rdma stack.
Signed-off-by: Kim Zhu <zhu.yanjun@ionos.com>
Reviewed-by: Md Haris Iqbal <haris.iqbal@ionos.com>
Signed-off-by: Grzegorz Prajsner <grzegorz.prajsner@ionos.com>
Link: https://patch.msgid.link/20260107161517.56357-5-haris.iqbal@ionos.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Support IB_MR_TYPE_SG_GAPS, which has less limitations
than standard IB_MR_TYPE_MEM_REG, a few ULP support this.
Signed-off-by: Md Haris Iqbal <haris.iqbal@ionos.com>
Signed-off-by: Kim Zhu <zhu.yanjun@ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Grzegorz Prajsner <grzegorz.prajsner@ionos.com>
Link: https://patch.msgid.link/20260107161517.56357-4-haris.iqbal@ionos.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Print error description instead of the error number.
Signed-off-by: Kim Zhu <zhu.yanjun@ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Grzegorz Prajsner <grzegorz.prajsner@ionos.com>
Link: https://patch.msgid.link/20260107161517.56357-3-haris.iqbal@ionos.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
This fixes the following error on the server side:
RTRS server session allocation failed: -EINVAL
caused by the caller of the `ib_dma_map_sg()`, which does not expect
less mapped entries, than requested, which is in the order of things
and can be easily reproduced on the machine with enabled IOMMU.
The fix is to treat any positive number of mapped sg entries as a
successful mapping and cache DMA addresses by traversing modified
SG table.
Fixes: 9cb837480424 ("RDMA/rtrs: server: main functionality")
Signed-off-by: Roman Penyaev <r.peniaev@gmail.com>
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Grzegorz Prajsner <grzegorz.prajsner@ionos.com>
Link: https://patch.msgid.link/20260107161517.56357-2-haris.iqbal@ionos.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
The main changes are the new HWRM_PORT_PHY_FDRSTAT command to collect
FEC histogram bins and the new HWRM_NVM_DEFRAG command to defragment the
NVRAM. There is also a minor name change in struct hwrm_vnic_cfg_input
that requires updating the bnxt_re driver's main.c.
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20260108183521.215610-2-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The OCRDMA_UVERBS() macro is unused, so remove it to clean up the code.
Link: https://patch.msgid.link/20260104-ib-core-misc-v1-6-00367f77f3a8@nvidia.com
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
|
|
Perform basic cleanup by removing unused defines from qedr.h.
Link: https://patch.msgid.link/20260104-ib-core-misc-v1-5-00367f77f3a8@nvidia.com
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
|
|
The dma_device field is marked as internal and must not be accessed by
drivers or ULPs. Remove all direct mlx5 references to this field.
Link: https://patch.msgid.link/20260104-ib-core-misc-v1-4-00367f77f3a8@nvidia.com
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
|
|
In mlx5_ib_stage_caps_init(), if mlx5_ib_init_ucaps() fails after
mlx5_ib_init_var_table() succeeds, the VAR bitmap is leaked since
the function returns without cleanup.
Thus, cleanup the var table bitmap in case of error of initializing
ucaps before exiting, preventing the leak above.
Fixes: cf7174e8982f ("RDMA/mlx5: Create UCAP char devices for supported device capabilities")
Signed-off-by: Maher Sanalla <msanalla@nvidia.com>
Reviewed-by: Yishai Hadas <yishaih@nvidia.com>
Link: https://patch.msgid.link/20260104-ib-core-misc-v1-3-00367f77f3a8@nvidia.com
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Some of the functions are local to the module and some are not used
starting from commit 36783dec8d79 ("RDMA/rxe: Delete deprecated module
parameters interface"). Delete and avoid exporting them.
Signed-off-by: Parav Pandit <parav@nvidia.com>
Link: https://patch.msgid.link/20260104-ib-core-misc-v1-2-00367f77f3a8@nvidia.com
Reviewed-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
ib_umem_dmabuf_get_with_dma_device() is an in-kernel function and does
not require a defensive check for the .move_notify callback. All current
callers guarantee that this callback is always present.
Link: https://patch.msgid.link/20260104-ib-core-misc-v1-1-00367f77f3a8@nvidia.com
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
|
|
Implement the query_port_speed callback for mlx5 driver to support
querying effective port bandwidth.
For LAG configurations, query the aggregated speed from the LAG layer
or from the modified vport max_tx_speed.
Signed-off-by: Or Har-Toov <ohartoov@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Edward Srouji <edwards@nvidia.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Raise IB_EVENT_DEVICE_SPEED_CHANGE whenever the speed of one of the
device's ports changes. Usually all ports of the device changes
together.
This ensures user applications and upper-layer software are immediately
notified when bandwidth changes, improving traffic management in dynamic
environments. This is especially useful for vports which are part of a
LAG configuration, to know if the effective speed of the LAG was
changed.
Signed-off-by: Or Har-Toov <ohartoov@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Edward Srouji <edwards@nvidia.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Add new ibv_query_port_speed() verb to enable applications to query
the effective bandwidth of a port.
This verb is particularly useful when the speed is not a multiplication
of IB speed and width where width is 2^n.
Signed-off-by: Or Har-Toov <ohartoov@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Edward Srouji <edwards@nvidia.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Update sysfs rate_show() to rely on ib_port_attr_to_speed_info() for
converting IB port speed and width attributes to data rate and speed
string.
Signed-off-by: Or Har-Toov <ohartoov@nvidia.com>
Reviewed-by: Maher Sanalla <msanalla@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Edward Srouji <edwards@nvidia.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Introduce ib_port_attr_to_rate() to compute the data rate in 100 Mbps
units (deci-Gb/sec) from a port's active_speed and active_width
attributes. This generic helper removes duplicated speed-to-rate
calculations, which are used by sysfs and the upcoming new verb.
Signed-off-by: Or Har-Toov <ohartoov@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Edward Srouji <edwards@nvidia.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Add IB_EVENT_DEVICE_SPEED_CHANGE for notifying user applications on
device's ports speed changes.
Signed-off-by: Or Har-Toov <ohartoov@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Edward Srouji <edwards@nvidia.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
During a reset, software-generated WCs cannot be reported via
interrupts. This may cause the ULP to miss some WCs.
To avoid this, add check in the CQ arm process: if a hardware reset
has occurred and there are still unreported soft-WCs, notify the ULP
to handle the remaining WCs, thereby preventing any loss of completions.
Fixes: 626903e9355b ("RDMA/hns: Add support for reporting wc as software mode")
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://patch.msgid.link/20260104064057.1582216-5-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
DSCP is not supported in RoCEv1, but get_dscp() is still called. If
get_dscp() returns an error, it'll eventually cause create_ah to fail
even when using RoCEv1.
Correct the return value and avoid calling get_dscp() when using
RoCEv1.
Fixes: ee20cc17e9d8 ("RDMA/hns: Support DSCP")
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://patch.msgid.link/20260104064057.1582216-4-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
query_cqc() and query_mpt() may return various error codes in
different cases. Return actual error code instead of fixed EINVAL.
Fixes: f2b070f36d1b ("RDMA/hns: Support CQ's restrack raw ops for hns driver")
Fixes: 3d67e7e236ad ("RDMA/hns: Support MR's restrack raw ops for hns driver")
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://patch.msgid.link/20260104064057.1582216-3-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
When sunrpc is used, if a reset triggered, our wq may lead the
following trace:
workqueue: WQ_MEM_RECLAIM xprtiod:xprt_rdma_connect_worker [rpcrdma]
is flushing !WQ_MEM_RECLAIM hns_roce_irq_workq:flush_work_handle
[hns_roce_hw_v2]
WARNING: CPU: 0 PID: 8250 at kernel/workqueue.c:2644 check_flush_dependency+0xe0/0x144
Call trace:
check_flush_dependency+0xe0/0x144
start_flush_work.constprop.0+0x1d0/0x2f0
__flush_work.isra.0+0x40/0xb0
flush_work+0x14/0x30
hns_roce_v2_destroy_qp+0xac/0x1e0 [hns_roce_hw_v2]
ib_destroy_qp_user+0x9c/0x2b4
rdma_destroy_qp+0x34/0xb0
rpcrdma_ep_destroy+0x28/0xcc [rpcrdma]
rpcrdma_ep_put+0x74/0xb4 [rpcrdma]
rpcrdma_xprt_disconnect+0x1d8/0x260 [rpcrdma]
xprt_rdma_connect_worker+0xc0/0x120 [rpcrdma]
process_one_work+0x1cc/0x4d0
worker_thread+0x154/0x414
kthread+0x104/0x144
ret_from_fork+0x10/0x18
Since QP destruction frees memory, this wq should have the WQ_MEM_RECLAIM.
Fixes: ffd541d45726 ("RDMA/hns: Add the workqueue framework for flush cqe handler")
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://patch.msgid.link/20260104064057.1582216-2-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Some HCAs (e.g: ConnectX4) do not trigger a IB_EVENT_GID_CHANGE on
subnet prefix update from SM (PortInfo).
Since the commit d58c23c92548 ("IB/core: Only update PKEY and GID caches
on respective events"), the GID cache is updated exclusively on
IB_EVENT_GID_CHANGE. If this event is not emitted, the subnet prefix in the
IPoIB interface’s hardware address remains set to its default value
(0xfe80000000000000).
Then rdma_bind_addr() failed because it relies on hardware address to
find the port GID (subnet_prefix + port GUID).
This patch fixes this issue by updating the GID cache on
IB_EVENT_CLIENT_REREGISTER event (emitted on PortInfo::ClientReregister=1).
Fixes: d58c23c92548 ("IB/core: Only update PKEY and GID caches on respective events")
Signed-off-by: Etienne AUJAMES <eaujames@ddn.com>
Link: https://patch.msgid.link/aVUfsO58QIDn5bGX@eaujamesFR0130
Reviewed-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
In limit_bank mode, QPs/CQs are restricted to using half of the banks.
HW concentrates resources on these banks, thereby improving performance
compared to the default mode.
Switch between limit_bank mode and default mode by setting the cap
flag in FW. Since the number of QPs and CQs will be halved, this mode
is suitable for scenarios where fewer QPs and CQs are required.
Signed-off-by: Lianfa Weng <wenglianfa@huawei.com>
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://patch.msgid.link/20251230154911.3397584-1-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
The dma_alloc_coherent() allocates a dma-mapped buffer, pbl->pg_arr[i].
The dma_free_coherent() should pass the same buffer to
dma_free_coherent() and not page-aligned.
Fixes: 1ac5a4047975 ("RDMA/bnxt_re: Add bnxt_re RoCE driver")
Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Link: https://patch.msgid.link/20251230085121.8023-2-fourier.thomas@gmail.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
If device max_mr_size bits in the range [mr_page_shift+31:mr_page_shift]
are zero, the `min3` function will set clt_path::max_pages_per_mr to
zero.
`alloc_path_reqs` will pass zero, which is invalid, as the third parameter
to `ib_alloc_mr`.
Fixes: 6a98d71daea1 ("RDMA/rtrs: client: main functionality")
Signed-off-by: Honggang LI <honggangli@163.com>
Link: https://patch.msgid.link/20251229025617.13241-1-honggangli@163.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
rxe_odp_map_range_and_lock() must release umem_odp->umem_mutex when an
error occurs, including cases where rxe_check_pagefault() fails.
Fixes: 2fae67ab63db ("RDMA/rxe: Add support for Send/Recv/Write/Read with ODP")
Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
Link: https://patch.msgid.link/20251226094112.3042583-1-lizhijian@fujitsu.com
Reviewed-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
As rkey had been initialized to zero, the WARN_ON_ONCE should never been
triggered. Remove it.
Fixes: 9cb837480424 ("RDMA/rtrs: server: main functionality")
Signed-off-by: Honggang LI <honggangli@163.com>
Link: https://patch.msgid.link/20251224023819.138846-1-honggangli@163.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
In bnxt_qplib_alloc_init_hwq(), while allocating memory for PDE table
driver incorrectly is using the "pg_size" value passed to the function.
Fixed to use the right value 4K. Also, fixed the allocation size for
PBL table.
Fixes: 0c4dcd602817 ("RDMA/bnxt_re: Refactor hardware queue memory allocation")
Signed-off-by: Damodharam Ammepalli <damodharam.ammepalli@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Link: https://patch.msgid.link/20251223131855.145955-1-kalesh-anakkur.purayil@broadcom.com
Reviewed-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Commit ef56081d1864 ("RDMA/bnxt_re: RoCE related hardware counters
update") added three new counters and placed them after
BNXT_RE_OUT_OF_SEQ_ERR.
BNXT_RE_OUT_OF_SEQ_ERR acts as a boundary marker for allocating hardware
statistics with different num_counters values on chip_gen_p5_p7 devices.
As a result, BNXT_RE_NUM_STD_COUNTERS are used when allocating
hw_stats, which leads to an out-of-bounds write in
bnxt_re_copy_err_stats().
The counters BNXT_RE_REQ_CQE_ERROR, BNXT_RE_RESP_CQE_ERROR, and
BNXT_RE_RESP_REMOTE_ACCESS_ERRS are applicable to generic hardware, not
only p5/p7 devices.
Fix this by moving these counters before BNXT_RE_OUT_OF_SEQ_ERR so they
are included in the generic counter set.
Fixes: ef56081d1864 ("RDMA/bnxt_re: RoCE related hardware counters update")
Reported-by: Yingying Zheng <zhengyingying@sangfor.com.cn>
Signed-off-by: Ding Hui <dinghui@sangfor.com.cn>
Link: https://patch.msgid.link/20251208072110.28874-1-dinghui@sangfor.com.cn
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Tested-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
The bnxt_re SEND path checks wr->send_flags to enable features such as
IP checksum offload. However, send_flags is a bitmask and may contain
multiple flags (e.g. IB_SEND_SIGNALED | IB_SEND_IP_CSUM), while the
existing code uses a switch() statement that only matches when
send_flags is exactly IB_SEND_IP_CSUM.
As a result, checksum offload is not enabled when additional SEND
flags are present.
Replace the switch() with a bitmask test:
if (wr->send_flags & IB_SEND_IP_CSUM)
This ensures IP checksum offload is enabled correctly when multiple
SEND flags are used.
Fixes: 1ac5a4047975 ("RDMA/bnxt_re: Add bnxt_re RoCE driver")
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Link: https://patch.msgid.link/20251219093308.2415620-1-alok.a.tiwari@oracle.com
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Since nldev_deldev() (introduced by commit 060c642b2ab8 ("RDMA/nldev: Add
support to add/delete a sub IB device through netlink") grabs a reference
using ib_device_get_by_index() before calling ib_del_sub_device_and_put(),
we need to drop that reference before returning -EOPNOTSUPP error.
Reported-by: syzbot+881d65229ca4f9ae8c84@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=881d65229ca4f9ae8c84
Fixes: bca51197620a ("RDMA/core: Support IB sub device with type "SMI"")
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Link: https://patch.msgid.link/80749a85-cbe2-460c-8451-42516013f9fa@I-love.SAKURA.ne.jp
Reviewed-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
On kernels build with CONFIG_PROVE_LOCKING, CONFIG_MODULES
and CONFIG_DEBUG_LOCK_ALLOC 'rmmod rdma_rxe' is no longer
possible.
For the global recv sockets rxe_net_exit() is where we
call rxe_release_udp_tunnel-> udp_tunnel_sock_release(),
which means the sockets are destroyed before 'rmmod rdma_rxe'
finishes, so there's no need to protect against
rxe_recv_slock_key and rxe_recv_sk_key disappearing
while the sockets are still alive.
Fixes: 80a85a771deb ("RDMA/rxe: reclassify sockets in order to avoid false positives from lockdep")
Cc: Zhu Yanjun <zyjzyj2000@gmail.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: Shinichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Cc: linux-rdma@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: linux-cifs@vger.kernel.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Link: https://patch.msgid.link/20251219140408.2300163-1-metze@samba.org
Reviewed-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Tested-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
RCFW_COMM_CONS_PCI_BAR_REGION is defined as BAR 2, so checking
!creq_db->reg.bar_id is incorrect and always false.
pci_resource_start() returns the BAR base address, and a value of 0
indicates that the BAR is unassigned. Update the condition to test
bar_base == 0 instead.
This ensures the driver detects and logs an error for an unassigned
RCFW communication BAR.
Fixes: cee0c7bba486 ("RDMA/bnxt_re: Refactor command queue management code")
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Link: https://patch.msgid.link/20251217100158.752504-1-alok.a.tiwari@oracle.com
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Fix missing comparison operator for RDMA_NETWORK_ROCE_V1 in the
conditional statement. The constant was used directly instead of
being compared with net_type, causing the condition to always
evaluate to true.
Fixes: 1c15b4f2a42f ("RDMA/core: Modify enum ib_gid_type and enum rdma_network_type")
Signed-off-by: Jang Ingyu <ingyujang25@korea.ac.kr>
Link: https://patch.msgid.link/20251219041508.1725947-1-ingyujang25@korea.ac.kr
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Add a new unused state to the admin completion contexts state machine
instead of the occupied field. This improves the completion validity
check because it now enforce the context to be in submitted state prior
to completing it. Also add allocated state as a intermediate state
between unused and submitted.
Reviewed-by: Daniel Kranzdorf <dkkranzd@amazon.com>
Reviewed-by: Michael Margolin <mrgolin@amazon.com>
Signed-off-by: Yonatan Nachum <ynachum@amazon.com>
Link: https://patch.msgid.link/20251210130614.36460-3-ynachum@amazon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
In admin command completion, we receive a CQE with the command ID which
is constructed from context index and entropy bits from the admin queue
producer counter. To try to detect memory corruptions in the received
CQE, validate the full command ID of the fetched context with the CQE
command ID. If there is a mismatch, complete the CQE with error.
Also use LSBs of the admin queue producer counter to better detect
entropy mismatch between smaller number of commands.
Reviewed-by: Daniel Kranzdorf <dkkranzd@amazon.com>
Reviewed-by: Michael Margolin <mrgolin@amazon.com>
Signed-off-by: Yonatan Nachum <ynachum@amazon.com>
Link: https://patch.msgid.link/20251210130614.36460-2-ynachum@amazon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
./drivers/infiniband/hw/irdma/ctrl.c:5792:10-15: WARNING: conversion to bool not needed here.
./drivers/infiniband/hw/irdma/uk.c:1412:6-11: WARNING: conversion to bool not needed here.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=27521
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Link: https://patch.msgid.link/20251204092414.1261795-1-jiapeng.chong@linux.alibaba.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
The page size used for device might in some cases be smaller than
PAGE_SIZE what results in a negative shift when calculating the number of
host pages in PAGE_SIZE for a debug log. Remove the debug line together
with the calculation.
Fixes: 40909f664d27 ("RDMA/efa: Add EFA verbs implementation")
Link: https://patch.msgid.link/r/20251210173656.8180-1-mrgolin@amazon.com
Reviewed-by: Tom Sela <tomsela@amazon.com>
Reviewed-by: Yonatan Nachum <ynachum@amazon.com>
Signed-off-by: Michael Margolin <mrgolin@amazon.com>
Reviewed-by: Gal Pressman <gal.pressman@linux.dev>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Fix all (30+) kernel-doc warnings in rtrs.h and rtrs-pri.h. The changes
are:
- add ending ':' to enum member names
- change enum description separators from '-' to ':'
- add "struct" keyword to kernel-doc for structs where missing
- fix enum names in enum rtrs_clt_con_type
- add a '-' separator and drop the "()" in enum rtrs_clt_con_type
- convert struct rtrs_addr to kernel-doc format
- add missing struct member descriptions for struct rtrs_attrs
Link: https://patch.msgid.link/r/20251129022146.1498273-1-rdunlap@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
irdma_net_event() should not dereference anything from "neigh" (alias
"ptr") until it has checked that the event is NETEVENT_NEIGH_UPDATE.
Other events come with different structures pointed to by "ptr" and they
may be smaller than struct neighbour.
Move the read of neigh->dev under the NETEVENT_NEIGH_UPDATE case.
The bug is mostly harmless, but it triggers KASAN on debug kernels:
BUG: KASAN: stack-out-of-bounds in irdma_net_event+0x32e/0x3b0 [irdma]
Read of size 8 at addr ffffc900075e07f0 by task kworker/27:2/542554
CPU: 27 PID: 542554 Comm: kworker/27:2 Kdump: loaded Not tainted 5.14.0-630.el9.x86_64+debug #1
Hardware name: [...]
Workqueue: events rt6_probe_deferred
Call Trace:
<IRQ>
dump_stack_lvl+0x60/0xb0
print_address_description.constprop.0+0x2c/0x3f0
print_report+0xb4/0x270
kasan_report+0x92/0xc0
irdma_net_event+0x32e/0x3b0 [irdma]
notifier_call_chain+0x9e/0x180
atomic_notifier_call_chain+0x5c/0x110
rt6_do_redirect+0xb91/0x1080
tcp_v6_err+0xe9b/0x13e0
icmpv6_notify+0x2b2/0x630
ndisc_redirect_rcv+0x328/0x530
icmpv6_rcv+0xc16/0x1360
ip6_protocol_deliver_rcu+0xb84/0x12e0
ip6_input_finish+0x117/0x240
ip6_input+0xc4/0x370
ipv6_rcv+0x420/0x7d0
__netif_receive_skb_one_core+0x118/0x1b0
process_backlog+0xd1/0x5d0
__napi_poll.constprop.0+0xa3/0x440
net_rx_action+0x78a/0xba0
handle_softirqs+0x2d4/0x9c0
do_softirq+0xad/0xe0
</IRQ>
Fixes: 915cc7ac0f8e ("RDMA/irdma: Add miscellaneous utility definitions")
Link: https://patch.msgid.link/r/20251127143150.121099-1-mschmidt@redhat.com
Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Check queue size during kernel CQ creation to prevent overflow of u32.
Fixes: bec127e45d9f ("RDMA/mana_ib: create kernel-level CQs")
Link: https://patch.msgid.link/r/1761213780-5457-1-git-send-email-kotaranov@linux.microsoft.com
Signed-off-by: Konstantin Taranov <kotaranov@microsoft.com>
Reviewed-by: Long Li <longli@microsoft.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
