| Age | Commit message (Collapse) | Author |
|---|
|
The dma_alloc_coherent() allocates a dma-mapped buffer, pbl->pg_arr[i].
The dma_free_coherent() should pass the same buffer to
dma_free_coherent() and not page-aligned.
Fixes: 1ac5a4047975 ("RDMA/bnxt_re: Add bnxt_re RoCE driver")
Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Link: https://patch.msgid.link/20251230085121.8023-2-fourier.thomas@gmail.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
If device max_mr_size bits in the range [mr_page_shift+31:mr_page_shift]
are zero, the `min3` function will set clt_path::max_pages_per_mr to
zero.
`alloc_path_reqs` will pass zero, which is invalid, as the third parameter
to `ib_alloc_mr`.
Fixes: 6a98d71daea1 ("RDMA/rtrs: client: main functionality")
Signed-off-by: Honggang LI <honggangli@163.com>
Link: https://patch.msgid.link/20251229025617.13241-1-honggangli@163.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
rxe_odp_map_range_and_lock() must release umem_odp->umem_mutex when an
error occurs, including cases where rxe_check_pagefault() fails.
Fixes: 2fae67ab63db ("RDMA/rxe: Add support for Send/Recv/Write/Read with ODP")
Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
Link: https://patch.msgid.link/20251226094112.3042583-1-lizhijian@fujitsu.com
Reviewed-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
In bnxt_qplib_alloc_init_hwq(), while allocating memory for PDE table
driver incorrectly is using the "pg_size" value passed to the function.
Fixed to use the right value 4K. Also, fixed the allocation size for
PBL table.
Fixes: 0c4dcd602817 ("RDMA/bnxt_re: Refactor hardware queue memory allocation")
Signed-off-by: Damodharam Ammepalli <damodharam.ammepalli@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Link: https://patch.msgid.link/20251223131855.145955-1-kalesh-anakkur.purayil@broadcom.com
Reviewed-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Commit ef56081d1864 ("RDMA/bnxt_re: RoCE related hardware counters
update") added three new counters and placed them after
BNXT_RE_OUT_OF_SEQ_ERR.
BNXT_RE_OUT_OF_SEQ_ERR acts as a boundary marker for allocating hardware
statistics with different num_counters values on chip_gen_p5_p7 devices.
As a result, BNXT_RE_NUM_STD_COUNTERS are used when allocating
hw_stats, which leads to an out-of-bounds write in
bnxt_re_copy_err_stats().
The counters BNXT_RE_REQ_CQE_ERROR, BNXT_RE_RESP_CQE_ERROR, and
BNXT_RE_RESP_REMOTE_ACCESS_ERRS are applicable to generic hardware, not
only p5/p7 devices.
Fix this by moving these counters before BNXT_RE_OUT_OF_SEQ_ERR so they
are included in the generic counter set.
Fixes: ef56081d1864 ("RDMA/bnxt_re: RoCE related hardware counters update")
Reported-by: Yingying Zheng <zhengyingying@sangfor.com.cn>
Signed-off-by: Ding Hui <dinghui@sangfor.com.cn>
Link: https://patch.msgid.link/20251208072110.28874-1-dinghui@sangfor.com.cn
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Tested-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
The bnxt_re SEND path checks wr->send_flags to enable features such as
IP checksum offload. However, send_flags is a bitmask and may contain
multiple flags (e.g. IB_SEND_SIGNALED | IB_SEND_IP_CSUM), while the
existing code uses a switch() statement that only matches when
send_flags is exactly IB_SEND_IP_CSUM.
As a result, checksum offload is not enabled when additional SEND
flags are present.
Replace the switch() with a bitmask test:
if (wr->send_flags & IB_SEND_IP_CSUM)
This ensures IP checksum offload is enabled correctly when multiple
SEND flags are used.
Fixes: 1ac5a4047975 ("RDMA/bnxt_re: Add bnxt_re RoCE driver")
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Link: https://patch.msgid.link/20251219093308.2415620-1-alok.a.tiwari@oracle.com
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Since nldev_deldev() (introduced by commit 060c642b2ab8 ("RDMA/nldev: Add
support to add/delete a sub IB device through netlink") grabs a reference
using ib_device_get_by_index() before calling ib_del_sub_device_and_put(),
we need to drop that reference before returning -EOPNOTSUPP error.
Reported-by: syzbot+881d65229ca4f9ae8c84@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=881d65229ca4f9ae8c84
Fixes: bca51197620a ("RDMA/core: Support IB sub device with type "SMI"")
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Link: https://patch.msgid.link/80749a85-cbe2-460c-8451-42516013f9fa@I-love.SAKURA.ne.jp
Reviewed-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
On kernels build with CONFIG_PROVE_LOCKING, CONFIG_MODULES
and CONFIG_DEBUG_LOCK_ALLOC 'rmmod rdma_rxe' is no longer
possible.
For the global recv sockets rxe_net_exit() is where we
call rxe_release_udp_tunnel-> udp_tunnel_sock_release(),
which means the sockets are destroyed before 'rmmod rdma_rxe'
finishes, so there's no need to protect against
rxe_recv_slock_key and rxe_recv_sk_key disappearing
while the sockets are still alive.
Fixes: 80a85a771deb ("RDMA/rxe: reclassify sockets in order to avoid false positives from lockdep")
Cc: Zhu Yanjun <zyjzyj2000@gmail.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: Shinichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Cc: linux-rdma@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: linux-cifs@vger.kernel.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Link: https://patch.msgid.link/20251219140408.2300163-1-metze@samba.org
Reviewed-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Tested-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
RCFW_COMM_CONS_PCI_BAR_REGION is defined as BAR 2, so checking
!creq_db->reg.bar_id is incorrect and always false.
pci_resource_start() returns the BAR base address, and a value of 0
indicates that the BAR is unassigned. Update the condition to test
bar_base == 0 instead.
This ensures the driver detects and logs an error for an unassigned
RCFW communication BAR.
Fixes: cee0c7bba486 ("RDMA/bnxt_re: Refactor command queue management code")
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Link: https://patch.msgid.link/20251217100158.752504-1-alok.a.tiwari@oracle.com
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Fix missing comparison operator for RDMA_NETWORK_ROCE_V1 in the
conditional statement. The constant was used directly instead of
being compared with net_type, causing the condition to always
evaluate to true.
Fixes: 1c15b4f2a42f ("RDMA/core: Modify enum ib_gid_type and enum rdma_network_type")
Signed-off-by: Jang Ingyu <ingyujang25@korea.ac.kr>
Link: https://patch.msgid.link/20251219041508.1725947-1-ingyujang25@korea.ac.kr
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
The page size used for device might in some cases be smaller than
PAGE_SIZE what results in a negative shift when calculating the number of
host pages in PAGE_SIZE for a debug log. Remove the debug line together
with the calculation.
Fixes: 40909f664d27 ("RDMA/efa: Add EFA verbs implementation")
Link: https://patch.msgid.link/r/20251210173656.8180-1-mrgolin@amazon.com
Reviewed-by: Tom Sela <tomsela@amazon.com>
Reviewed-by: Yonatan Nachum <ynachum@amazon.com>
Signed-off-by: Michael Margolin <mrgolin@amazon.com>
Reviewed-by: Gal Pressman <gal.pressman@linux.dev>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Fix all (30+) kernel-doc warnings in rtrs.h and rtrs-pri.h. The changes
are:
- add ending ':' to enum member names
- change enum description separators from '-' to ':'
- add "struct" keyword to kernel-doc for structs where missing
- fix enum names in enum rtrs_clt_con_type
- add a '-' separator and drop the "()" in enum rtrs_clt_con_type
- convert struct rtrs_addr to kernel-doc format
- add missing struct member descriptions for struct rtrs_attrs
Link: https://patch.msgid.link/r/20251129022146.1498273-1-rdunlap@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
irdma_net_event() should not dereference anything from "neigh" (alias
"ptr") until it has checked that the event is NETEVENT_NEIGH_UPDATE.
Other events come with different structures pointed to by "ptr" and they
may be smaller than struct neighbour.
Move the read of neigh->dev under the NETEVENT_NEIGH_UPDATE case.
The bug is mostly harmless, but it triggers KASAN on debug kernels:
BUG: KASAN: stack-out-of-bounds in irdma_net_event+0x32e/0x3b0 [irdma]
Read of size 8 at addr ffffc900075e07f0 by task kworker/27:2/542554
CPU: 27 PID: 542554 Comm: kworker/27:2 Kdump: loaded Not tainted 5.14.0-630.el9.x86_64+debug #1
Hardware name: [...]
Workqueue: events rt6_probe_deferred
Call Trace:
<IRQ>
dump_stack_lvl+0x60/0xb0
print_address_description.constprop.0+0x2c/0x3f0
print_report+0xb4/0x270
kasan_report+0x92/0xc0
irdma_net_event+0x32e/0x3b0 [irdma]
notifier_call_chain+0x9e/0x180
atomic_notifier_call_chain+0x5c/0x110
rt6_do_redirect+0xb91/0x1080
tcp_v6_err+0xe9b/0x13e0
icmpv6_notify+0x2b2/0x630
ndisc_redirect_rcv+0x328/0x530
icmpv6_rcv+0xc16/0x1360
ip6_protocol_deliver_rcu+0xb84/0x12e0
ip6_input_finish+0x117/0x240
ip6_input+0xc4/0x370
ipv6_rcv+0x420/0x7d0
__netif_receive_skb_one_core+0x118/0x1b0
process_backlog+0xd1/0x5d0
__napi_poll.constprop.0+0xa3/0x440
net_rx_action+0x78a/0xba0
handle_softirqs+0x2d4/0x9c0
do_softirq+0xad/0xe0
</IRQ>
Fixes: 915cc7ac0f8e ("RDMA/irdma: Add miscellaneous utility definitions")
Link: https://patch.msgid.link/r/20251127143150.121099-1-mschmidt@redhat.com
Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Check queue size during kernel CQ creation to prevent overflow of u32.
Fixes: bec127e45d9f ("RDMA/mana_ib: create kernel-level CQs")
Link: https://patch.msgid.link/r/1761213780-5457-1-git-send-email-kotaranov@linux.microsoft.com
Signed-off-by: Konstantin Taranov <kotaranov@microsoft.com>
Reviewed-by: Long Li <longli@microsoft.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
If the CM ID is destroyed while the CM event for multicast creating is
still queued the cancel_work_sync() will prevent the work from running
which also prevents destroying the ah_attr. This leaks a refcount and
triggers a WARN:
GID entry ref leak for dev syz1 index 2 ref=573
WARNING: CPU: 1 PID: 655 at drivers/infiniband/core/cache.c:809 release_gid_table drivers/infiniband/core/cache.c:806 [inline]
WARNING: CPU: 1 PID: 655 at drivers/infiniband/core/cache.c:809 gid_table_release_one+0x284/0x3cc drivers/infiniband/core/cache.c:886
Destroy the ah_attr after canceling the work, it is safe to call this
twice.
Link: https://patch.msgid.link/r/0-v1-4285d070a6b2+20a-rdma_mc_gid_leak_syz_jgg@nvidia.com
Cc: stable@vger.kernel.org
Fixes: fe454dc31e84 ("RDMA/ucma: Fix use-after-free bug in ucma_create_uevent")
Reported-by: syzbot+b0da83a6c0e2e2bddbd4@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/68232e7b.050a0220.f2294.09f6.GAE@google.com
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
The netlink response for RDMA_NL_LS_OP_IP_RESOLVE should always have a
LS_NLA_TYPE_DGID attribute, it is invalid if it does not.
Use the nl parsing logic properly and call nla_parse_deprecated() to fill
the nlattrs array and then directly index that array to get the data for
the DGID. Just fail if it is NULL.
Remove the for loop searching for the nla, and squash the validation and
parsing into one function.
Fixes an uninitialized read from the stack triggered by userspace if it
does not provide the DGID to a kernel initiated RDMA_NL_LS_OP_IP_RESOLVE
query.
BUG: KMSAN: uninit-value in hex_byte_pack include/linux/hex.h:13 [inline]
BUG: KMSAN: uninit-value in ip6_string+0xef4/0x13a0 lib/vsprintf.c:1490
hex_byte_pack include/linux/hex.h:13 [inline]
ip6_string+0xef4/0x13a0 lib/vsprintf.c:1490
ip6_addr_string+0x18a/0x3e0 lib/vsprintf.c:1509
ip_addr_string+0x245/0xee0 lib/vsprintf.c:1633
pointer+0xc09/0x1bd0 lib/vsprintf.c:2542
vsnprintf+0xf8a/0x1bd0 lib/vsprintf.c:2930
vprintk_store+0x3ae/0x1530 kernel/printk/printk.c:2279
vprintk_emit+0x307/0xcd0 kernel/printk/printk.c:2426
vprintk_default+0x3f/0x50 kernel/printk/printk.c:2465
vprintk+0x36/0x50 kernel/printk/printk_safe.c:82
_printk+0x17e/0x1b0 kernel/printk/printk.c:2475
ib_nl_process_good_ip_rsep drivers/infiniband/core/addr.c:128 [inline]
ib_nl_handle_ip_res_resp+0x963/0x9d0 drivers/infiniband/core/addr.c:141
rdma_nl_rcv_msg drivers/infiniband/core/netlink.c:-1 [inline]
rdma_nl_rcv_skb drivers/infiniband/core/netlink.c:239 [inline]
rdma_nl_rcv+0xefa/0x11c0 drivers/infiniband/core/netlink.c:259
netlink_unicast_kernel net/netlink/af_netlink.c:1320 [inline]
netlink_unicast+0xf04/0x12b0 net/netlink/af_netlink.c:1346
netlink_sendmsg+0x10b3/0x1250 net/netlink/af_netlink.c:1896
sock_sendmsg_nosec net/socket.c:714 [inline]
__sock_sendmsg+0x333/0x3d0 net/socket.c:729
____sys_sendmsg+0x7e0/0xd80 net/socket.c:2617
___sys_sendmsg+0x271/0x3b0 net/socket.c:2671
__sys_sendmsg+0x1aa/0x300 net/socket.c:2703
__compat_sys_sendmsg net/compat.c:346 [inline]
__do_compat_sys_sendmsg net/compat.c:353 [inline]
__se_compat_sys_sendmsg net/compat.c:350 [inline]
__ia32_compat_sys_sendmsg+0xa4/0x100 net/compat.c:350
ia32_sys_call+0x3f6c/0x4310 arch/x86/include/generated/asm/syscalls_32.h:371
do_syscall_32_irqs_on arch/x86/entry/syscall_32.c:83 [inline]
__do_fast_syscall_32+0xb0/0x150 arch/x86/entry/syscall_32.c:306
do_fast_syscall_32+0x38/0x80 arch/x86/entry/syscall_32.c:331
do_SYSENTER_32+0x1f/0x30 arch/x86/entry/syscall_32.c:3
Link: https://patch.msgid.link/r/0-v1-3fbaef094271+2cf-rdma_op_ip_rslv_syz_jgg@nvidia.com
Cc: stable@vger.kernel.org
Fixes: ae43f8286730 ("IB/core: Add IP to GID netlink offload")
Reported-by: syzbot+938fcd548c303fe33c1a@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/r/68dc3dac.a00a0220.102ee.004f.GAE@google.com
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Pull rdma updates from Jason Gunthorpe:
"This has another new RDMA driver 'bng_en' for latest generation
Broadcom NICs. There might be one more new driver still to come.
Otherwise it is a fairly quite cycle. Summary:
- Minor driver bug fixes and updates to cxgb4, rxe, rdmavt, bnxt_re,
mlx5
- Many bug fix patches for irdma
- WQ_PERCPU annotations and system_dfl_wq changes
- Improved mlx5 support for "other eswitches" and multiple PFs
- 1600Gbps link speed reporting support. Four Digits Now!
- New driver bng_en for latest generation Broadcom NICs
- Bonding support for hns
- Adjust mlx5's hmm based ODP to work with the very large address
space created by the new 5 level paging default on x86
- Lockdep fixups in rxe and siw"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (65 commits)
RDMA/rxe: reclassify sockets in order to avoid false positives from lockdep
RDMA/siw: reclassify sockets in order to avoid false positives from lockdep
RDMA/bng_re: Remove prefetch instruction
RDMA/core: Reduce cond_resched() frequency in __ib_umem_release
RDMA/irdma: Fix SRQ shadow area address initialization
RDMA/irdma: Remove doorbell elision logic
RDMA/irdma: Do not set IBK_LOCAL_DMA_LKEY for GEN3+
RDMA/irdma: Do not directly rely on IB_PD_UNSAFE_GLOBAL_RKEY
RDMA/irdma: Add missing mutex destroy
RDMA/irdma: Fix SIGBUS in AEQ destroy
RDMA/irdma: Add a missing kfree of struct irdma_pci_f for GEN2
RDMA/irdma: Fix data race in irdma_free_pble
RDMA/irdma: Fix data race in irdma_sc_ccq_arm
RDMA/mlx5: Add support for 1600_8x lane speed
RDMA/core: Add new IB rate for XDR (8x) support
IB/mlx5: Reduce IMR KSM size when 5-level paging is enabled
RDMA/bnxt_re: Pass correct flag for dma mr creation
RDMA/bnxt_re: Fix the inline size for GenP7 devices
RDMA/hns: Support reset recovery for bond
RDMA/hns: Support link state reporting for bond
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Replace busylock at the Tx queuing layer with a lockless list.
Resulting in a 300% (4x) improvement on heavy TX workloads, sending
twice the number of packets per second, for half the cpu cycles.
- Allow constantly busy flows to migrate to a more suitable CPU/NIC
queue.
Normally we perform queue re-selection when flow comes out of idle,
but under extreme circumstances the flows may be constantly busy.
Add sysctl to allow periodic rehashing even if it'd risk packet
reordering.
- Optimize the NAPI skb cache, make it larger, use it in more paths.
- Attempt returning Tx skbs to the originating CPU (like we already
did for Rx skbs).
- Various data structure layout and prefetch optimizations from Eric.
- Remove ktime_get() from the recvmsg() fast path, ktime_get() is
sadly quite expensive on recent AMD machines.
- Extend threaded NAPI polling to allow the kthread busy poll for
packets.
- Make MPTCP use Rx backlog processing. This lowers the lock
pressure, improving the Rx performance.
- Support memcg accounting of MPTCP socket memory.
- Allow admin to opt sockets out of global protocol memory accounting
(using a sysctl or BPF-based policy). The global limits are a poor
fit for modern container workloads, where limits are imposed using
cgroups.
- Improve heuristics for when to kick off AF_UNIX garbage collection.
- Allow users to control TCP SACK compression, and default to 33% of
RTT.
- Add tcp_rcvbuf_low_rtt sysctl to let datacenter users avoid
unnecessarily aggressive rcvbuf growth and overshot when the
connection RTT is low.
- Preserve skb metadata space across skb_push / skb_pull operations.
- Support for IPIP encapsulation in the nftables flowtable offload.
- Support appending IP interface information to ICMP messages (RFC
5837).
- Support setting max record size in TLS (RFC 8449).
- Remove taking rtnl_lock from RTM_GETNEIGHTBL and RTM_SETNEIGHTBL.
- Use a dedicated lock (and RCU) in MPLS, instead of rtnl_lock.
- Let users configure the number of write buffers in SMC.
- Add new struct sockaddr_unsized for sockaddr of unknown length,
from Kees.
- Some conversions away from the crypto_ahash API, from Eric Biggers.
- Some preparations for slimming down struct page.
- YAML Netlink protocol spec for WireGuard.
- Add a tool on top of YAML Netlink specs/lib for reporting commonly
computed derived statistics and summarized system state.
Driver API:
- Add CAN XL support to the CAN Netlink interface.
- Add uAPI for reporting PHY Mean Square Error (MSE) diagnostics, as
defined by the OPEN Alliance's "Advanced diagnostic features for
100BASE-T1 automotive Ethernet PHYs" specification.
- Add DPLL phase-adjust-gran pin attribute (and implement it in
zl3073x).
- Refactor xfrm_input lock to reduce contention when NIC offloads
IPsec and performs RSS.
- Add info to devlink params whether the current setting is the
default or a user override. Allow resetting back to default.
- Add standard device stats for PSP crypto offload.
- Leverage DSA frame broadcast to implement simple HSR frame
duplication for a lot of switches without dedicated HSR offload.
- Add uAPI defines for 1.6Tbps link modes.
Device drivers:
- Add Motorcomm YT921x gigabit Ethernet switch support.
- Add MUCSE driver for N500/N210 1GbE NIC series.
- Convert drivers to support dedicated ops for timestamping control,
and away from the direct IOCTL handling. While at it support GET
operations for PHY timestamping.
- Add (and convert most drivers to) a dedicated ethtool callback for
reading the Rx ring count.
- Significant refactoring efforts in the STMMAC driver, which
supports Synopsys turn-key MAC IP integrated into a ton of SoCs.
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- support PPS in/out on all pins
- Intel (100G, ice, idpf):
- ice: implement standard ethtool and timestamping stats
- i40e: support setting the max number of MAC addresses per VF
- iavf: support RSS of GTP tunnels for 5G and LTE deployments
- nVidia/Mellanox (mlx5):
- reduce downtime on interface reconfiguration
- disable being an XDP redirect target by default (same as
other drivers) to avoid wasting resources if feature is
unused
- Meta (fbnic):
- add support for Linux-managed PCS on 25G, 50G, and 100G links
- Wangxun:
- support Rx descriptor merge, and Tx head writeback
- support Rx coalescing offload
- support 25G SPF and 40G QSFP modules
- Ethernet virtual:
- Google (gve):
- allow ethtool to configure rx_buf_len
- implement XDP HW RX Timestamping support for DQ descriptor
format
- Microsoft vNIC (mana):
- support HW link state events
- handle hardware recovery events when probing the device
- Ethernet NICs consumer, and embedded:
- usbnet: add support for Byte Queue Limits (BQL)
- AMD (amd-xgbe):
- add device selftests
- NXP (enetc):
- add i.MX94 support
- Broadcom integrated MACs (bcmgenet, bcmasp):
- bcmasp: add support for PHY-based Wake-on-LAN
- Broadcom switches (b53):
- support port isolation
- support BCM5389/97/98 and BCM63XX ARL formats
- Lantiq/MaxLinear switches:
- support bridge FDB entries on the CPU port
- use regmap for register access
- allow user to enable/disable learning
- support Energy Efficient Ethernet
- support configuring RMII clock delays
- add tagging driver for MaxLinear GSW1xx switches
- Synopsys (stmmac):
- support using the HW clock in free running mode
- add Eswin EIC7700 support
- add Rockchip RK3506 support
- add Altera Agilex5 support
- Cadence (macb):
- cleanup and consolidate descriptor and DMA address handling
- add EyeQ5 support
- TI:
- icssg-prueth: support AF_XDP
- Airoha access points:
- add missing Ethernet stats and link state callback
- add AN7583 support
- support out-of-order Tx completion processing
- Power over Ethernet:
- pd692x0: preserve PSE configuration across reboots
- add support for TPS23881B devices
- Ethernet PHYs:
- Open Alliance OATC14 10BASE-T1S PHY cable diagnostic support
- Support 50G SerDes and 100G interfaces in Linux-managed PHYs
- micrel:
- support for non PTP SKUs of lan8814
- enable in-band auto-negotiation on lan8814
- realtek:
- cable testing support on RTL8224
- interrupt support on RTL8221B
- motorcomm: support for PHY LEDs on YT853
- microchip: support for LAN867X Rev.D0 PHYs w/ SQI and cable diag
- mscc: support for PHY LED control
- CAN drivers:
- m_can: add support for optional reset and system wake up
- remove can_change_mtu() obsoleted by core handling
- mcp251xfd: support GPIO controller functionality
- Bluetooth:
- add initial support for PASTa
- WiFi:
- split ieee80211.h file, it's way too big
- improvements in VHT radiotap reporting, S1G, Channel Switch
Announcement handling, rate tracking in mesh networks
- improve multi-radio monitor mode support, and add a cfg80211
debugfs interface for it
- HT action frame handling on 6 GHz
- initial chanctx work towards NAN
- MU-MIMO sniffer improvements
- WiFi drivers:
- RealTek (rtw89):
- support USB devices RTL8852AU and RTL8852CU
- initial work for RTL8922DE
- improved injection support
- Intel:
- iwlwifi: new sniffer API support
- MediaTek (mt76):
- WED support for >32-bit DMA
- airoha NPU support
- regdomain improvements
- continued WiFi7/MLO work
- Qualcomm/Atheros:
- ath10k: factory test support
- ath11k: TX power insertion support
- ath12k: BSS color change support
- ath12k: statistics improvements
- brcmfmac: Acer A1 840 tablet quirk
- rtl8xxxu: 40 MHz connection fixes/support"
* tag 'net-next-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1381 commits)
net: page_pool: sanitise allocation order
net: page pool: xa init with destroy on pp init
net/mlx5e: Support XDP target xmit with dummy program
net/mlx5e: Update XDP features in switch channels
selftests/tc-testing: Test CAKE scheduler when enqueue drops packets
net/sched: sch_cake: Fix incorrect qlen reduction in cake_drop
wireguard: netlink: generate netlink code
wireguard: uapi: generate header with ynl-gen
wireguard: uapi: move flag enums
wireguard: uapi: move enum wg_cmd
wireguard: netlink: add YNL specification
selftests: drv-net: Fix tolerance calculation in devlink_rate_tc_bw.py
selftests: drv-net: Fix and clarify TC bandwidth split in devlink_rate_tc_bw.py
selftests: drv-net: Set shell=True for sysfs writes in devlink_rate_tc_bw.py
selftests: drv-net: Use Iperf3Runner in devlink_rate_tc_bw.py
selftests: drv-net: introduce Iperf3Runner for measurement use cases
selftests: drv-net: Add devlink_rate_tc_bw.py to TEST_PROGS
net: ps3_gelic_net: Use napi_alloc_skb() and napi_gro_receive()
Documentation: net: dsa: mention simple HSR offload helpers
Documentation: net: dsa: mention availability of RedBox
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool updates from Ingo Molnar:
- klp-build livepatch module generation (Josh Poimboeuf)
Introduce new objtool features and a klp-build script to generate
livepatch modules using a source .patch as input.
This builds on concepts from the longstanding out-of-tree kpatch
project which began in 2012 and has been used for many years to
generate livepatch modules for production kernels. However, this is a
complete rewrite which incorporates hard-earned lessons from 12+
years of maintaining kpatch.
Key improvements compared to kpatch-build:
- Integrated with objtool: Leverages objtool's existing control-flow
graph analysis to help detect changed functions.
- Works on vmlinux.o: Supports late-linked objects, making it
compatible with LTO, IBT, and similar.
- Simplified code base: ~3k fewer lines of code.
- Upstream: No more out-of-tree #ifdef hacks, far less cruft.
- Cleaner internals: Vastly simplified logic for
symbol/section/reloc inclusion and special section extraction.
- Robust __LINE__ macro handling: Avoids false positive binary diffs
caused by the __LINE__ macro by introducing a fix-patch-lines
script which injects #line directives into the source .patch to
preserve the original line numbers at compile time.
- Disassemble code with libopcodes instead of running objdump
(Alexandre Chartre)
- Disassemble support (-d option to objtool) by Alexandre Chartre,
which supports the decoding of various Linux kernel code generation
specials such as alternatives:
17ef: sched_balance_find_dst_group+0x62f mov 0x34(%r9),%edx
17f3: sched_balance_find_dst_group+0x633 | <alternative.17f3> | X86_FEATURE_POPCNT
17f3: sched_balance_find_dst_group+0x633 | call 0x17f8 <__sw_hweight64> | popcnt %rdi,%rax
17f8: sched_balance_find_dst_group+0x638 cmp %eax,%edx
... jump table alternatives:
1895: sched_use_asym_prio+0x5 test $0x8,%ch
1898: sched_use_asym_prio+0x8 je 0x18a9 <sched_use_asym_prio+0x19>
189a: sched_use_asym_prio+0xa | <jump_table.189a> | JUMP
189a: sched_use_asym_prio+0xa | jmp 0x18ae <sched_use_asym_prio+0x1e> | nop2
189c: sched_use_asym_prio+0xc mov $0x1,%eax
18a1: sched_use_asym_prio+0x11 and $0x80,%ecx
... exception table alternatives:
native_read_msr:
5b80: native_read_msr+0x0 mov %edi,%ecx
5b82: native_read_msr+0x2 | <ex_table.5b82> | EXCEPTION
5b82: native_read_msr+0x2 | rdmsr | resume at 0x5b84 <native_read_msr+0x4>
5b84: native_read_msr+0x4 shl $0x20,%rdx
.... x86 feature flag decoding (also see the X86_FEATURE_POPCNT
example in sched_balance_find_dst_group() above):
2faaf: start_thread_common.constprop.0+0x1f jne 0x2fba4 <start_thread_common.constprop.0+0x114>
2fab5: start_thread_common.constprop.0+0x25 | <alternative.2fab5> | X86_FEATURE_ALWAYS | X86_BUG_NULL_SEG
2fab5: start_thread_common.constprop.0+0x25 | jmp 0x2faba <.altinstr_aux+0x2f4> | jmp 0x4b0 <start_thread_common.constprop.0+0x3f> | nop5
2faba: start_thread_common.constprop.0+0x2a mov $0x2b,%eax
... NOP sequence shortening:
1048e2: snapshot_write_finalize+0xc2 je 0x104917 <snapshot_write_finalize+0xf7>
1048e4: snapshot_write_finalize+0xc4 nop6
1048ea: snapshot_write_finalize+0xca nop11
1048f5: snapshot_write_finalize+0xd5 nop11
104900: snapshot_write_finalize+0xe0 mov %rax,%rcx
104903: snapshot_write_finalize+0xe3 mov 0x10(%rdx),%rax
... and much more.
- Function validation tracing support (Alexandre Chartre)
- Various -ffunction-sections fixes (Josh Poimboeuf)
- Clang AutoFDO (Automated Feedback-Directed Optimizations) support
(Josh Poimboeuf)
- Misc fixes and cleanups (Borislav Petkov, Chen Ni, Dylan Hatch, Ingo
Molnar, John Wang, Josh Poimboeuf, Pankaj Raghav, Peter Zijlstra,
Thorsten Blum)
* tag 'objtool-core-2025-12-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (129 commits)
objtool: Fix segfault on unknown alternatives
objtool: Build with disassembly can fail when including bdf.h
objtool: Trim trailing NOPs in alternative
objtool: Add wide output for disassembly
objtool: Compact output for alternatives with one instruction
objtool: Improve naming of group alternatives
objtool: Add Function to get the name of a CPU feature
objtool: Provide access to feature and flags of group alternatives
objtool: Fix address references in alternatives
objtool: Disassemble jump table alternatives
objtool: Disassemble exception table alternatives
objtool: Print addresses with alternative instructions
objtool: Disassemble group alternatives
objtool: Print headers for alternatives
objtool: Preserve alternatives order
objtool: Add the --disas=<function-pattern> action
objtool: Do not validate IBT for .return_sites and .call_sites
objtool: Improve tracing of alternative instructions
objtool: Add functions to better name alternatives
objtool: Identify the different types of alternatives
...
|
|
While developing IPPROTO_SMBDIRECT support for the code
under fs/smb/common/smbdirect [1], I noticed false positives like this:
[+0,003927] ============================================
[+0,000532] WARNING: possible recursive locking detected
[+0,000611] 6.18.0-rc5-metze-kasan-lockdep.02+ #1 Tainted: G OE
[+0,000835] --------------------------------------------
[+0,000729] ksmbd:r5445/3609 is trying to acquire lock:
[+0,000709] ffff88800b9570f8 (k-sk_lock-AF_INET){+.+.}-{0:0},
at: inet_shutdown+0x52/0x360
[+0,000831]
but task is already holding lock:
[+0,000684] ffff88800654af78 (k-sk_lock-AF_INET){+.+.}-{0:0},
at: smbdirect_sk_close+0x122/0x790 [smbdirect]
[+0,000928]
other info that might help us debug this:
[+0,005552] Possible unsafe locking scenario:
[+0,000723] CPU0
[+0,000359] ----
[+0,000377] lock(k-sk_lock-AF_INET);
[+0,000478] lock(k-sk_lock-AF_INET);
[+0,000498]
*** DEADLOCK ***
[+0,001012] May be due to missing lock nesting notation
[+0,000831] 3 locks held by ksmbd:r5445/3609:
[+0,000484] #0: ffff88800654af78 (k-sk_lock-AF_INET){+.+.}-{0:0},
at: smbdirect_sk_close+0x122/0x790 [smbdirect]
[+0,001000] #1: ffff888020a40458 (&id_priv->handler_mutex){+.+.}-{4:4},
at: rdma_lock_handler+0x17/0x30 [rdma_cm]
[+0,000982] #2: ffff888020a40350 (&id_priv->qp_mutex){+.+.}-{4:4},
at: rdma_destroy_qp+0x5d/0x1f0 [rdma_cm]
[+0,000934]
stack backtrace:
[+0,000589] CPU: 0 UID: 0 PID: 3609 Comm: ksmbd:r5445 Kdump: loaded
Tainted: G OE
6.18.0-rc5-metze-kasan-lockdep.02+ #1 PREEMPT(voluntary)
[+0,000023] Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE
[+0,000004] Hardware name: innotek GmbH VirtualBox/VirtualBox,
BIOS VirtualBox 12/01/2006
...
[+0,000010] print_deadlock_bug+0x245/0x330
[+0,000014] validate_chain+0x32a/0x590
[+0,000012] __lock_acquire+0x535/0xc30
[+0,000013] lock_acquire.part.0+0xb3/0x240
[+0,000017] ? inet_shutdown+0x52/0x360
[+0,000013] ? srso_alias_return_thunk+0x5/0xfbef5
[+0,000007] ? mark_held_locks+0x46/0x90
[+0,000012] lock_acquire+0x60/0x140
[+0,000006] ? inet_shutdown+0x52/0x360
[+0,000028] lock_sock_nested+0x3b/0xf0
[+0,000009] ? inet_shutdown+0x52/0x360
[+0,000008] inet_shutdown+0x52/0x360
[+0,000010] kernel_sock_shutdown+0x5b/0x90
[+0,000011] rxe_qp_do_cleanup+0x4ef/0x810 [rdma_rxe]
[+0,000043] ? __pfx_rxe_qp_do_cleanup+0x10/0x10 [rdma_rxe]
[+0,000030] execute_in_process_context+0x2b/0x170
[+0,000013] rxe_qp_cleanup+0x1c/0x30 [rdma_rxe]
[+0,000021] __rxe_cleanup+0x1cf/0x2e0 [rdma_rxe]
[+0,000036] ? __pfx___rxe_cleanup+0x10/0x10 [rdma_rxe]
[+0,000020] ? srso_alias_return_thunk+0x5/0xfbef5
[+0,000006] ? __kasan_check_read+0x11/0x20
[+0,000012] rxe_destroy_qp+0xe1/0x230 [rdma_rxe]
[+0,000035] ib_destroy_qp_user+0x217/0x450 [ib_core]
[+0,000074] rdma_destroy_qp+0x83/0x1f0 [rdma_cm]
[+0,000034] smbdirect_connection_destroy_qp+0x98/0x2e0 [smbdirect]
[+0,000017] ? __pfx_smb_direct_logging_needed+0x10/0x10 [ksmbd]
[+0,000044] smbdirect_connection_destroy+0x698/0xed0 [smbdirect]
[+0,000023] ? __pfx_smbdirect_connection_destroy+0x10/0x10 [smbdirect]
[+0,000033] ? __pfx_smb_direct_logging_needed+0x10/0x10 [ksmbd]
[+0,000031] smbdirect_connection_destroy_sync+0x42b/0x9f0 [smbdirect]
[+0,000029] ? mark_held_locks+0x46/0x90
[+0,000012] ? __pfx_smbdirect_connection_destroy_sync+0x10/0x10 [smbdirect]
[+0,000019] ? srso_alias_return_thunk+0x5/0xfbef5
[+0,000007] ? trace_hardirqs_on+0x64/0x70
[+0,000029] ? srso_alias_return_thunk+0x5/0xfbef5
[+0,000010] ? srso_alias_return_thunk+0x5/0xfbef5
[+0,000006] ? __smbdirect_connection_schedule_disconnect+0x339/0x4b0
[+0,000021] smbdirect_sk_destroy+0xb0/0x680 [smbdirect]
[+0,000024] ? srso_alias_return_thunk+0x5/0xfbef5
[+0,000006] ? trace_hardirqs_on+0x64/0x70
[+0,000006] ? srso_alias_return_thunk+0x5/0xfbef5
[+0,000005] ? __local_bh_enable_ip+0xba/0x150
[+0,000011] sk_common_release+0x66/0x340
[+0,000010] smbdirect_sk_close+0x12a/0x790 [smbdirect]
[+0,000023] ? ip_mc_drop_socket+0x1e/0x240
[+0,000013] inet_release+0x10a/0x240
[+0,000011] smbdirect_sock_release+0x502/0xe80 [smbdirect]
[+0,000015] ? srso_alias_return_thunk+0x5/0xfbef5
[+0,000024] sock_release+0x91/0x1c0
[+0,000010] smb_direct_free_transport+0x31/0x50 [ksmbd]
[+0,000025] ksmbd_conn_free+0x1d0/0x240 [ksmbd]
[+0,000040] smb_direct_disconnect+0xb2/0x120 [ksmbd]
[+0,000023] ? srso_alias_return_thunk+0x5/0xfbef5
[+0,000018] ksmbd_conn_handler_loop+0x94e/0xf10 [ksmbd]
...
I'll also add reclassify to the smbdirect socket code [1],
but I think it's better to have it in both direction
(below and above the RDMA layer).
[1]
https://git.samba.org/?p=metze/linux/wip.git;a=shortlog;h=refs/heads/master-ipproto-smbdirect
Cc: Zhu Yanjun <zyjzyj2000@gmail.com>
Reviewed-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: linux-rdma@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: linux-cifs@vger.kernel.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Link: https://patch.msgid.link/20251127105614.2040922-1-metze@samba.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
While developing IPPROTO_SMBDIRECT support for the code
under fs/smb/common/smbdirect [1], I noticed false positives like this:
[T79] ======================================================
[T79] WARNING: possible circular locking dependency detected
[T79] 6.18.0-rc4-metze-kasan-lockdep.01+ #1 Tainted: G OE
[T79] ------------------------------------------------------
[T79] kworker/2:0/79 is trying to acquire lock:
[T79] ffff88801f968278 (sk_lock-AF_INET){+.+.}-{0:0},
at: sock_set_reuseaddr+0x14/0x70
[T79]
but task is already holding lock:
[T79] ffffffffc10f7230 (lock#9){+.+.}-{4:4},
at: rdma_listen+0x3d2/0x740 [rdma_cm]
[T79]
which lock already depends on the new lock.
[T79]
the existing dependency chain (in reverse order) is:
[T79]
-> #1 (lock#9){+.+.}-{4:4}:
[T79] __lock_acquire+0x535/0xc30
[T79] lock_acquire.part.0+0xb3/0x240
[T79] lock_acquire+0x60/0x140
[T79] __mutex_lock+0x1af/0x1c10
[T79] mutex_lock_nested+0x1b/0x30
[T79] cma_get_port+0xba/0x7d0 [rdma_cm]
[T79] rdma_bind_addr_dst+0x598/0x9a0 [rdma_cm]
[T79] cma_bind_addr+0x107/0x320 [rdma_cm]
[T79] rdma_resolve_addr+0xa3/0x830 [rdma_cm]
[T79] destroy_lease_table+0x12b/0x420 [ksmbd]
[T79] ksmbd_NTtimeToUnix+0x3e/0x80 [ksmbd]
[T79] ndr_encode_posix_acl+0x6e9/0xab0 [ksmbd]
[T79] ndr_encode_v4_ntacl+0x53/0x870 [ksmbd]
[T79] __sys_connect_file+0x131/0x1c0
[T79] __sys_connect+0x111/0x140
[T79] __x64_sys_connect+0x72/0xc0
[T79] x64_sys_call+0xe7d/0x26a0
[T79] do_syscall_64+0x93/0xff0
[T79] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[T79]
-> #0 (sk_lock-AF_INET){+.+.}-{0:0}:
[T79] check_prev_add+0xf3/0xcd0
[T79] validate_chain+0x466/0x590
[T79] __lock_acquire+0x535/0xc30
[T79] lock_acquire.part.0+0xb3/0x240
[T79] lock_acquire+0x60/0x140
[T79] lock_sock_nested+0x3b/0xf0
[T79] sock_set_reuseaddr+0x14/0x70
[T79] siw_create_listen+0x145/0x1540 [siw]
[T79] iw_cm_listen+0x313/0x5b0 [iw_cm]
[T79] cma_iw_listen+0x271/0x3c0 [rdma_cm]
[T79] rdma_listen+0x3b1/0x740 [rdma_cm]
[T79] cma_listen_on_dev+0x46a/0x750 [rdma_cm]
[T79] rdma_listen+0x4b0/0x740 [rdma_cm]
[T79] ksmbd_rdma_init+0x12b/0x270 [ksmbd]
[T79] ksmbd_conn_transport_init+0x26/0x70 [ksmbd]
[T79] server_ctrl_handle_work+0x1e5/0x280 [ksmbd]
[T79] process_one_work+0x86c/0x1930
[T79] worker_thread+0x6f0/0x11f0
[T79] kthread+0x3ec/0x8b0
[T79] ret_from_fork+0x314/0x400
[T79] ret_from_fork_asm+0x1a/0x30
[T79]
other info that might help us debug this:
[T79] Possible unsafe locking scenario:
[T79] CPU0 CPU1
[T79] ---- ----
[T79] lock(lock#9);
[T79] lock(sk_lock-AF_INET);
[T79] lock(lock#9);
[T79] lock(sk_lock-AF_INET);
[T79]
*** DEADLOCK ***
[T79] 5 locks held by kworker/2:0/79:
[T79] #0: ffff88800120b158 ((wq_completion)events_long){+.+.}-{0:0},
at: process_one_work+0xfca/0x1930
[T79] #1: ffffc9000474fd00 ((work_completion)(&ctrl->ctrl_work))
{+.+.}-{0:0},
at: process_one_work+0x804/0x1930
[T79] #2: ffffffffc11307d0 (ctrl_lock){+.+.}-{4:4},
at: server_ctrl_handle_work+0x21/0x280 [ksmbd]
[T79] #3: ffffffffc11347b0 (init_lock){+.+.}-{4:4},
at: ksmbd_conn_transport_init+0x18/0x70 [ksmbd]
[T79] #4: ffffffffc10f7230 (lock#9){+.+.}-{4:4},
at: rdma_listen+0x3d2/0x740 [rdma_cm]
[T79]
stack backtrace:
[T79] CPU: 2 UID: 0 PID: 79 Comm: kworker/2:0 Kdump: loaded
Tainted: G OE
6.18.0-rc4-metze-kasan-lockdep.01+ #1 PREEMPT(voluntary)
[T79] Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE
[T79] Hardware name: innotek GmbH VirtualBox/VirtualBox,
BIOS VirtualBox 12/01/2006
[T79] Workqueue: events_long server_ctrl_handle_work [ksmbd]
...
[T79] print_circular_bug+0xfd/0x130
[T79] check_noncircular+0x150/0x170
[T79] check_prev_add+0xf3/0xcd0
[T79] validate_chain+0x466/0x590
[T79] __lock_acquire+0x535/0xc30
[T79] ? srso_alias_return_thunk+0x5/0xfbef5
[T79] lock_acquire.part.0+0xb3/0x240
[T79] ? sock_set_reuseaddr+0x14/0x70
[T79] ? srso_alias_return_thunk+0x5/0xfbef5
[T79] ? __kasan_check_write+0x14/0x30
[T79] ? srso_alias_return_thunk+0x5/0xfbef5
[T79] ? apparmor_socket_post_create+0x180/0x700
[T79] lock_acquire+0x60/0x140
[T79] ? sock_set_reuseaddr+0x14/0x70
[T79] lock_sock_nested+0x3b/0xf0
[T79] ? sock_set_reuseaddr+0x14/0x70
[T79] sock_set_reuseaddr+0x14/0x70
[T79] siw_create_listen+0x145/0x1540 [siw]
[T79] ? srso_alias_return_thunk+0x5/0xfbef5
[T79] ? local_clock_noinstr+0xe/0xd0
[T79] ? __pfx_siw_create_listen+0x10/0x10 [siw]
[T79] ? trace_preempt_on+0x4c/0x130
[T79] ? __raw_spin_unlock_irqrestore+0x4a/0x90
[T79] ? srso_alias_return_thunk+0x5/0xfbef5
[T79] ? preempt_count_sub+0x52/0x80
[T79] iw_cm_listen+0x313/0x5b0 [iw_cm]
[T79] cma_iw_listen+0x271/0x3c0 [rdma_cm]
[T79] ? srso_alias_return_thunk+0x5/0xfbef5
[T79] rdma_listen+0x3b1/0x740 [rdma_cm]
[T79] ? _raw_spin_unlock+0x2c/0x60
[T79] ? __pfx_rdma_listen+0x10/0x10 [rdma_cm]
[T79] ? rdma_restrack_add+0x12c/0x630 [ib_core]
[T79] ? srso_alias_return_thunk+0x5/0xfbef5
[T79] cma_listen_on_dev+0x46a/0x750 [rdma_cm]
[T79] rdma_listen+0x4b0/0x740 [rdma_cm]
[T79] ? __pfx_rdma_listen+0x10/0x10 [rdma_cm]
[T79] ? cma_get_port+0x30d/0x7d0 [rdma_cm]
[T79] ? srso_alias_return_thunk+0x5/0xfbef5
[T79] ? rdma_bind_addr_dst+0x598/0x9a0 [rdma_cm]
[T79] ksmbd_rdma_init+0x12b/0x270 [ksmbd]
[T79] ? __pfx_ksmbd_rdma_init+0x10/0x10 [ksmbd]
[T79] ? srso_alias_return_thunk+0x5/0xfbef5
[T79] ? srso_alias_return_thunk+0x5/0xfbef5
[T79] ? register_netdevice_notifier+0x1dc/0x240
[T79] ksmbd_conn_transport_init+0x26/0x70 [ksmbd]
[T79] server_ctrl_handle_work+0x1e5/0x280 [ksmbd]
[T79] process_one_work+0x86c/0x1930
[T79] ? __pfx_process_one_work+0x10/0x10
[T79] ? srso_alias_return_thunk+0x5/0xfbef5
[T79] ? assign_work+0x16f/0x280
[T79] worker_thread+0x6f0/0x11f0
I was not able to reproduce this as I was testing with various
runs switching siw and rxe as well as IPPROTO_SMBDIRECT sockets,
while the above stack used siw with the non IPPROTO_SMBDIRECT
patches [1].
Even if this patch doesn't solve the above I think it's
a good idea to reclassify the sockets used by siw,
I also send patches for rxe to reclassify, as well
as my IPPROTO_SMBDIRECT socket patches [1] will do it,
this should minimize potential false positives.
[1]
https://git.samba.org/?p=metze/linux/wip.git;a=shortlog;h=refs/heads/master-ipproto-smbdirect
Cc: Bernard Metzler <bernard.metzler@linux.dev>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: linux-rdma@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: linux-cifs@vger.kernel.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Link: https://patch.msgid.link/20251126150842.1837072-1-metze@samba.org
Acked-by: Bernard Metzler <bernard.metzler@linux.dev>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
The prefetch instruction is meant to speed up access to memory referenced
by its address argument. In the bng_re code path, it has no effect,
because the pointer refers to a function that is executed immediately
afterward.
The issue was identified due to the following kbuild compilation error:
drivers/infiniband/hw/bng_re/bng_fw.c: In function 'bng_re_creq_irq':
drivers/infiniband/hw/bng_re/bng_fw.c:278:9: error: implicit
declaration of function 'prefetch' [-Wimplicit-function-declaration]
278 | prefetch(bng_re_get_qe(hwq, sw_cons, NULL));
| ^~~~~~~~
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202511260607.Kuxn4NnN-lkp@intel.com/
Fixes: 4f830cd8d7fe ("RDMA/bng_re: Add infrastructure for enabling Firmware channel")
Link: https://patch.msgid.link/20251126-remove-prefetch-v1-1-fcac22007ea7@nvidia.com
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
|
|
The current implementation calls cond_resched() for every SG entry
in __ib_umem_release(), which can increase needless overhead.
This patch introduces RESCHED_LOOP_CNT_THRESHOLD (0x1000) to limit
how often cond_resched() is called. The function now yields the CPU
once every 4096 iterations, and yield at the very first iteration
for lots of small umem case, to reduce scheduling overhead.
Fixes: d056bc45b62b ("RDMA/core: Prevent soft lockup during large user memory region cleanup")
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Link: https://patch.msgid.link/20251126025147.2627-1-lirongqing@baidu.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Fix SRQ shadow area address initialization.
Fixes: 563e1feb5f6e ("RDMA/irdma: Add SRQ support")
Signed-off-by: Jijun Wang <jijun.wang@intel.com>
Signed-off-by: Jay Bhat <jay.bhat@intel.com>
Link: https://patch.msgid.link/20251125025350.180-10-tatyana.e.nikolova@intel.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
In some cases, this logic can result in doorbell writes being
skipped when they should not have been (at least on GEN3 HW),
so remove it. This also means that the mb() can be safely
downgraded to dma_wmb().
Fixes: 551c46edc769 ("RDMA/irdma: Add user/kernel shared libraries")
Signed-off-by: Jacob Moroni <jmoroni@google.com>
Signed-off-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com>
Link: https://patch.msgid.link/20251125025350.180-9-tatyana.e.nikolova@intel.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
The GEN3 hardware does not appear to support IBK_LOCAL_DMA_LKEY. Attempts
to use it will result in an AE.
Fixes: eb31dfc2b41a ("RDMA/irdma: Restrict Memory Window and CQE Timestamping to GEN3")
Signed-off-by: Jacob Moroni <jmoroni@google.com>
Signed-off-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com>
Link: https://patch.msgid.link/20251125025350.180-8-tatyana.e.nikolova@intel.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
The HW disables bounds checking for MRs with a length of zero, so
the driver will only allow a zero length MR if the "all_memory"
flag is set, and this flag is only set if IB_PD_UNSAFE_GLOBAL_RKEY
is set for the PD.
This means that the "get_dma_mr" method will currently fail unless
the IB_PD_UNSAFE_GLOBAL_RKEY flag is set. This has not been an issue
because the "get_dma_mr" method is only ever invoked if the device
does not support the local DMA key or if IB_PD_UNSAFE_GLOBAL_RKEY
is set, and so far, all IRDMA HW supports the local DMA lkey.
However, some new HW does not support the local DMA lkey, so the
"get_dma_mr" method needs to work without IB_PD_UNSAFE_GLOBAL_RKEY
being set.
To support HW that does not allow the local DMA lkey, the logic has
been changed to pass an explicit flag to indicate when a dma_mr is
being created so that the zero length will be allowed.
Also, the "all_memory" flag has been forced to false for normal MR
allocation since these MRs are never supposed to provide global
unsafe rkey semantics anyway; only the MR created with "get_dma_mr"
should support this.
Fixes: bb6d73d9add6 ("RDMA/irdma: Prevent zero-length STAG registration")
Signed-off-by: Jacob Moroni <jmoroni@google.com>
Signed-off-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com>
Link: https://patch.msgid.link/20251125025350.180-7-tatyana.e.nikolova@intel.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Add missing destroy of ah_tbl_lock and vchnl_mutex.
Fixes: d5edd33364a5 ("RDMA/irdma: RDMA/irdma: Add GEN3 core driver support")
Signed-off-by: Anil Samal <anil.samal@intel.com>
Signed-off-by: Krzysztof Czurylo <krzysztof.czurylo@intel.com>
Signed-off-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com>
Link: https://patch.msgid.link/20251125025350.180-6-tatyana.e.nikolova@intel.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Removes write to IRDMA_PFINT_AEQCTL register prior to destroying AEQ,
as this register does not exist in GEN3+ hardware and this kind of IRQ
configuration is no longer required.
Fixes: b800e82feba7 ("RDMA/irdma: Add GEN3 support for AEQ and CEQ")
Signed-off-by: Krzysztof Czurylo <krzysztof.czurylo@intel.com>
Signed-off-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com>
Link: https://patch.msgid.link/20251125025350.180-5-tatyana.e.nikolova@intel.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
During a refactor of the irdma GEN2 code, the kfree of the irdma_pci_f struct
in icrdma_remove(), which was originally introduced upstream as part of
commit 80f2ab46c2ee ("irdma: free iwdev->rf after removing MSI-X")
was accidentally removed.
Fixes: 0c2b80cac96e ("RDMA/irdma: Refactor GEN2 auxiliary driver")
Signed-off-by: Krzysztof Czurylo <krzysztof.czurylo@intel.com>
Signed-off-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com>
Link: https://patch.msgid.link/20251125025350.180-4-tatyana.e.nikolova@intel.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Protects pble_rsrc counters with mutex to prevent data race.
Fixes the following data race in irdma_free_pble reported by KCSAN:
BUG: KCSAN: data-race in irdma_free_pble [irdma] / irdma_free_pble [irdma]
write to 0xffff91430baa0078 of 8 bytes by task 16956 on cpu 5:
irdma_free_pble+0x3b/0xb0 [irdma]
irdma_dereg_mr+0x108/0x110 [irdma]
ib_dereg_mr_user+0x74/0x160 [ib_core]
uverbs_free_mr+0x26/0x30 [ib_uverbs]
destroy_hw_idr_uobject+0x4a/0x90 [ib_uverbs]
uverbs_destroy_uobject+0x7b/0x330 [ib_uverbs]
uobj_destroy+0x61/0xb0 [ib_uverbs]
ib_uverbs_run_method+0x1f2/0x380 [ib_uverbs]
ib_uverbs_cmd_verbs+0x365/0x440 [ib_uverbs]
ib_uverbs_ioctl+0x111/0x190 [ib_uverbs]
__x64_sys_ioctl+0xc9/0x100
do_syscall_64+0x44/0xa0
entry_SYSCALL_64_after_hwframe+0x6e/0xd8
read to 0xffff91430baa0078 of 8 bytes by task 16953 on cpu 2:
irdma_free_pble+0x23/0xb0 [irdma]
irdma_dereg_mr+0x108/0x110 [irdma]
ib_dereg_mr_user+0x74/0x160 [ib_core]
uverbs_free_mr+0x26/0x30 [ib_uverbs]
destroy_hw_idr_uobject+0x4a/0x90 [ib_uverbs]
uverbs_destroy_uobject+0x7b/0x330 [ib_uverbs]
uobj_destroy+0x61/0xb0 [ib_uverbs]
ib_uverbs_run_method+0x1f2/0x380 [ib_uverbs]
ib_uverbs_cmd_verbs+0x365/0x440 [ib_uverbs]
ib_uverbs_ioctl+0x111/0x190 [ib_uverbs]
__x64_sys_ioctl+0xc9/0x100
do_syscall_64+0x44/0xa0
entry_SYSCALL_64_after_hwframe+0x6e/0xd8
value changed: 0x0000000000005a62 -> 0x0000000000005a68
Fixes: e8c4dbc2fcac ("RDMA/irdma: Add PBLE resource manager")
Signed-off-by: Krzysztof Czurylo <krzysztof.czurylo@intel.com>
Signed-off-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com>
Link: https://patch.msgid.link/20251125025350.180-3-tatyana.e.nikolova@intel.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Adds a lock around irdma_sc_ccq_arm body to prevent inter-thread data race.
Fixes data race in irdma_sc_ccq_arm() reported by KCSAN:
BUG: KCSAN: data-race in irdma_sc_ccq_arm [irdma] / irdma_sc_ccq_arm [irdma]
read to 0xffff9d51b4034220 of 8 bytes by task 255 on cpu 11:
irdma_sc_ccq_arm+0x36/0xd0 [irdma]
irdma_cqp_ce_handler+0x300/0x310 [irdma]
cqp_compl_worker+0x2a/0x40 [irdma]
process_one_work+0x402/0x7e0
worker_thread+0xb3/0x6d0
kthread+0x178/0x1a0
ret_from_fork+0x2c/0x50
write to 0xffff9d51b4034220 of 8 bytes by task 89 on cpu 3:
irdma_sc_ccq_arm+0x7e/0xd0 [irdma]
irdma_cqp_ce_handler+0x300/0x310 [irdma]
irdma_wait_event+0xd4/0x3e0 [irdma]
irdma_handle_cqp_op+0xa5/0x220 [irdma]
irdma_hw_flush_wqes+0xb1/0x300 [irdma]
irdma_flush_wqes+0x22e/0x3a0 [irdma]
irdma_cm_disconn_true+0x4c7/0x5d0 [irdma]
irdma_disconnect_worker+0x35/0x50 [irdma]
process_one_work+0x402/0x7e0
worker_thread+0xb3/0x6d0
kthread+0x178/0x1a0
ret_from_fork+0x2c/0x50
value changed: 0x0000000000024000 -> 0x0000000000034000
Fixes: 3f49d6842569 ("RDMA/irdma: Implement HW Admin Queue OPs")
Signed-off-by: Krzysztof Czurylo <krzysztof.czurylo@intel.com>
Signed-off-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com>
Link: https://patch.msgid.link/20251125025350.180-2-tatyana.e.nikolova@intel.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Add a check for 1600G_8X link speed when querying PTYS and report it
back correctly when needed.
While at it, adjust mlx5 function which maps the speed rate from IB
spec values to internal driver values to be able to handle speeds
up to 1600Gbps.
Reviewed-by: Michael Guralnik <michaelgur@nvidia.com>
Signed-off-by: Maher Sanalla <msanalla@nvidia.com>
Link: https://patch.msgid.link/20251120-speed-8-v1-2-e6a7efef8cb8@nvidia.com
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Add the new rates as defined in the Infiniband spec for XDR and 8x
link width support.
Furthermore, modify the utility conversion methods accordingly.
Reference: IB Spec Release 1.8
Reviewed-by: Michael Guralnik <michaelgur@nvidia.com>
Signed-off-by: Maher Sanalla <msanalla@nvidia.com>
Link: https://patch.msgid.link/20251120-speed-8-v1-1-e6a7efef8cb8@nvidia.com
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Enabling 5-level paging (LA57) increases TASK_SIZE on x86_64 from 2^47
to 2^56. This affects implicit ODP, which uses TASK_SIZE to calculate
the number of IMR KSM entries.
As a result, the number of entries and the memory usage for KSM mkeys
increase drastically:
- With 2^47 TASK_SIZE: 0x20000 entries (~2MB)
- With 2^56 TASK_SIZE: 0x4000000 entries (~1GB)
This issue could happen previously on systems with LA57 manually
enabled, but now commit 7212b58d6d71 ("x86/mm/64: Make 5-level paging
support unconditional") enables LA57 by default on all supported
systems. This makes the issue impact widespread.
To mitigate this, increase the size each MTT entry maps from 1GB to 16GB
when 5-level paging is enabled. This reduces the number of KSM entries
and lowers the memory usage on LA57 systems from 1GB to 64MB per IMR.
As now 'mlx5_imr_mtt_size' is larger than 32 bits, we move to use u64
instead of int as part of populate_klm() to prevent overflow of the
'step' variable.
In addition, as populate_klm() actually handles KSM and not KLM, as it's
used only by implicit ODP, we renamed its signature and the internal
structures accordingly while dropping the byte_count handling which is
not relevant in KSM. The page size in KSM is fixed for all the entries
and come from the log_page_size of the mkey.
Note:
On platforms where the calculated value for 'mlx5_imr_ksm_page_shift' is
higher than the max firmware cap to be changed over UMR, or that the
calculated value for 'log_va_pages' is higher than what we may expect,
the implicit ODP cap will be simply turned off.
Co-developed-by: Or Har-Toov <ohartoov@nvidia.com>
Signed-off-by: Or Har-Toov <ohartoov@nvidia.com>
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Reviewed-by: Michael Guralnik <michaelgur@nvidia.com>
Signed-off-by: Edward Srouji <edwards@nvidia.com>
Link: https://patch.msgid.link/20251120-reduce-ksm-v1-1-6864bfc814dc@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
DMA MR doesn't use the unified MR model. So the lkey passed
on to the reg_mr command to FW should contain the correct
lkey. Driver is incorrectly over writing the lkey with pdid
and firmware commands fails due to this.
Avoid passing the wrong key for cases where the unified MR
registration is not used.
Fixes: f786eebbbefa ("RDMA/bnxt_re: Avoid an extra hwrm per MR creation")
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://patch.msgid.link/1763624215-10382-2-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Inline size supported by the device is based on the number
of SGEs supported by the adapter. Change the inline
size calculation based on that.
Fixes: de1d364c3815 ("RDMA/bnxt_re: Add support for Variable WQE in Genp7 adapters")
Reviewed-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://patch.msgid.link/1763624215-10382-1-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Re-set bond configuration to HW after HW reset.
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://patch.msgid.link/20251112093510.3696363-9-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
The link state of bond depends on the upper device. Adapt current
link state querying flow and ib_event dispatching flow to report
correct link state of bond.
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://patch.msgid.link/20251112093510.3696363-8-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
When conditions are met, schedule a delayed work in bond event handler
to perform bonding operation according to the bond state. In the case
of changing slave number or link state, re-set the netdev for the bond
ibdev after the modification is complete, since these two operations
may not call hns_roce_set_bond_netdev() in hns_roce_init().
The delayed work will be paused when there is a driver reset or exit
to avoid concurrency.
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://patch.msgid.link/20251112093510.3696363-7-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Implement hns_roce_slave_init() and hns_roce_slave_uninit() for device
init/uninit in bonding cases. The former is used to initialize a slave
ibdev (when the slave is unlinked from a bond) or a bond ibdev, while
the latter does the opposite. Most of the process is the same as
regular device init/uninit, while some bonding‑specific steps below are
also added.
In bond device init flow, choose one slave to re-initialize as the
main_hr_dev of the bond, and it will be the only device presented for
multiple slaves. During registration, set and active netdev to the
ibdev based on the link state of the slaves. When this main_hr_dev
slave is being unlinked while the bond is still valid, choose a new
slave from the rest and initialize it as the new bond device.
In uninit flow, add a bond cleanup process, restore all the other
slaves and clean up bond resource. This is only for the case where
the port of main_hr_dev is directly removed without unlinking it
from bond.
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://patch.msgid.link/20251112093510.3696363-6-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Add three bonding cmds to configure bonding settings to HW.
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://patch.msgid.link/20251112093510.3696363-5-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Register netdev notifier for two bonding events NETDEV_CHANGEUPPER
and NETDEV_CHANGELOWERSTATE.
In NETDEV_CHANGEUPPER event handler, check some rules about the HW
constraints when trying to link a new slave to the masteri, and
store some bonding information from the notifier. In unlinking case,
simply check the number of the rest slaves to decide whether the
bond is still supported.
In NETDEV_CHANGELOWERSTATE event handler, not much is done. It
simply sets the bond state when the bond is ready, which will be
used later.
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://patch.msgid.link/20251112093510.3696363-4-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Allocate bond_grp resources for each card when the first device in
this card is registered. Block the initialization of VF when its PF
is a bonded slave, as VF is not supported in this case due to HW
constraints.
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://patch.msgid.link/20251112093510.3696363-3-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Add helpers to obtain netdev and bus_num from hr_dev.
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://patch.msgid.link/20251112093510.3696363-2-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Initialize the firmware and hardware with HWRM command.
Signed-off-by: Siva Reddy Kallam <siva.kallam@broadcom.com>
Link: https://patch.msgid.link/20251117171136.128193-9-siva.kallam@broadcom.com
Reviewed-by: Usman Ansari <usman.ansari@broadcom.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Add basic debugfs infrastructure for Broadcom next generation
controller.
Signed-off-by: Siva Reddy Kallam <siva.kallam@broadcom.com>
Link: https://patch.msgid.link/20251117171136.128193-8-siva.kallam@broadcom.com
Reviewed-by: Usman Ansari <usman.ansari@broadcom.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Enable Firmware channel and query device attributes
Signed-off-by: Siva Reddy Kallam <siva.kallam@broadcom.com>
Link: https://patch.msgid.link/20251117171136.128193-7-siva.kallam@broadcom.com
Reviewed-by: Usman Ansari <usman.ansari@broadcom.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Add infrastructure for enabling Firmware channel.
Signed-off-by: Siva Reddy Kallam <siva.kallam@broadcom.com>
Link: https://patch.msgid.link/20251117171136.128193-6-siva.kallam@broadcom.com
Reviewed-by: Usman Ansari <usman.ansari@broadcom.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Allocate required memory resources for Firmware channel.
Signed-off-by: Siva Reddy Kallam <siva.kallam@broadcom.com>
Link: https://patch.msgid.link/20251117171136.128193-5-siva.kallam@broadcom.com
Reviewed-by: Usman Ansari <usman.ansari@broadcom.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
