summaryrefslogtreecommitdiff
path: root/drivers/input/rmi4
AgeCommit message (Collapse)Author
2026-06-11Input: rmi4 - update formatting in F12Dmitry Torokhov
Clean up various style and formatting issues in the F12 code. Link: https://patch.msgid.link/20260505045952.1570713-20-dmitry.torokhov@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2026-06-11Input: rmi4 - propagate proper error code in F12 sensor tuningDmitry Torokhov
Propagate the actual error code returned by rmi_read() in rmi_f12_read_sensor_tuning() instead of hardcoding -ENODEV. Also, since rmi_read() returns 0 on success, use 'if (ret)' instead of 'if (ret < 0)'. Assisted-by: Gemini:gemini-3.1-pro Link: https://patch.msgid.link/20260505045952.1570713-19-dmitry.torokhov@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2026-06-11Input: rmi4 - simplify size calculations in F12Dmitry Torokhov
Use min_t() to simplify the clamping logic when calculating the number of objects to process and the number of valid bytes in the attention handler. Assisted-by: Gemini:gemini-3.1-pro Link: https://patch.msgid.link/20260505045952.1570713-18-dmitry.torokhov@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2026-06-11Input: rmi4 - use sizeof(*ptr) and idiomatic checks in f12 allocatorsDmitry Torokhov
Using sizeof(*ptr) is preferred over sizeof(struct) because it is more robust against type changes. Also switch to checking for allocation failure immediately after each call, and update formatting. Assisted-by: Gemini:gemini-3.1-pro Link: https://patch.msgid.link/20260505045952.1570713-17-dmitry.torokhov@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2026-06-11Input: rmi4 - use devm_kmalloc for F12 data packet bufferDmitry Torokhov
The sensor->data_pkt buffer is used exclusively to store incoming hardware data during the attention handler, where it is entirely overwritten by either memcpy() or rmi_read_block(). Therefore, there is no need to zero-initialize it during probe. Switch to devm_kmalloc() to avoid the unnecessary memset overhead. Assisted-by: Gemini:gemini-3.1-pro Link: https://patch.msgid.link/20260505045952.1570713-16-dmitry.torokhov@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2026-06-11Input: rmi4 - use flexible array member for IRQ masks in F12Dmitry Torokhov
Use a flexible array member to allocate the IRQ masks at the end of the f12_data structure, and use the struct_size() helper to calculate the allocation size safely. This replaces manual pointer arithmetic. Assisted-by: Gemini:gemini-3.1-pro Link: https://patch.msgid.link/20260505045952.1570713-15-dmitry.torokhov@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2026-06-11Input: rmi4 - use unaligned access helpers in F12Dmitry Torokhov
Use get_unaligned_le16() instead of manual bit shifts to construct 16-bit values for max_x, max_y, pitch_x, pitch_y, and object coordinates in the F12 parsing logic. This simplifies the code and makes the endianness explicit. Assisted-by: Gemini:gemini-3.1-pro Link: https://patch.msgid.link/20260505045952.1570713-14-dmitry.torokhov@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2026-06-11Input: rmi4 - change reg_size type to u32Dmitry Torokhov
Change reg_size from unsigned long to u32 to save space and ensure consistent size across 32-bit and 64-bit architectures, and use DECLARE_BITMAP() for subpacket_map. Also pack the structure by rearranging the members to avoid holes, and use size_add() to prevent potential integer overflows when calculating the total size of registers. Assisted-by: Gemini:gemini-3.1-pro Link: https://patch.msgid.link/20260505045952.1570713-13-dmitry.torokhov@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2026-06-11Input: rmi4 - refactor F12 probe functionDmitry Torokhov
The F12 probe function contains highly repetitive logic for parsing register descriptors and their individual data items. Refactor the function to use loops to eliminate redundancy, and clarify the code. Assisted-by: Gemini:gemini-3.1-pro Link: https://patch.msgid.link/20260505045952.1570713-12-dmitry.torokhov@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2026-06-11Input: rmi4 - use kzalloc_flex() for struct rmi_functionDmitry Torokhov
struct rmi_function contains a flexible array member irq_mask. Convert the manual kzalloc size calculation to use the kzalloc_flex() macro. Assisted-by: Gemini:gemini-3.1-pro Link: https://patch.msgid.link/20260505045952.1570713-11-dmitry.torokhov@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2026-06-11Input: rmi4 - refactor function allocation and registrationDmitry Torokhov
Currently, rmi_create_function() allocates memory for the rmi_function structure, but rmi_register_function() initializes the device via device_initialize(). This split of ownership makes error handling in rmi_create_function() confusing because the caller must be aware that if rmi_register_function() fails, it has already called put_device() to clean up the memory. To make the memory lifecycle explicit and fix potential leaks cleanly introduce rmi_alloc_function() to handle memory allocation and device initialization, and make the caller of rmi_register_function() responsible for cleanup. Assisted-by: Gemini:gemini-3.1-pro Link: https://patch.msgid.link/20260505045952.1570713-10-dmitry.torokhov@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2026-06-11Input: rmi4 - use local presence map in rmi_read_register_desc()Dmitry Torokhov
The presence map is only used during the parsing of the register descriptor, so we can make it a local variable instead of storing it in struct rmi_register_descriptor. Also fix the spelling of the constant and the variable name (presence instead of presense). Assisted-by: Gemini:gemini-3.1-pro Link: https://patch.msgid.link/20260505045952.1570713-9-dmitry.torokhov@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2026-06-11Input: rmi4 - fix limit in rmi_register_desc_has_subpacket()Dmitry Torokhov
rmi_register_desc_has_subpacket() should use RMI_REG_DESC_SUBPACKET_BITS, not RMI_REG_DESC_PRESENCE_BITS, as the limit for subpacket_map. Fixes: 2b6a321da9a2 ("Input: synaptics-rmi4 - add support for Synaptics RMI4 devices") Assisted-by: Gemini:gemini-3.1-pro Link: https://patch.msgid.link/20260505045952.1570713-8-dmitry.torokhov@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2026-06-11Input: rmi4 - fix bit count in bitmap_copy()Dmitry Torokhov
bitmap_copy() takes number of bits, not bytes (or longs). Correct the bit count in rmi_driver_set_irq_bits() and rmi_driver_clear_irq_bits(). Fixes: 2b6a321da9a2 ("Input: synaptics-rmi4 - add support for Synaptics RMI4 devices") Cc: stable@vger.kernel.org Assisted-by: Gemini:gemini-3.1-pro Link: https://patch.msgid.link/20260505045952.1570713-7-dmitry.torokhov@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2026-06-11Input: rmi4 - iterative IRQ handlerDmitry Torokhov
The current IRQ handler uses recursion to drain the attention FIFO, which can lead to stack overflow on deep queues. Convert it to a loop. Fixes: b908d3cd812a ("Input: synaptics-rmi4 - allow to add attention data") Cc: stable@vger.kernel.org Assisted-by: Gemini:gemini-3.1-pro Link: https://patch.msgid.link/20260505045952.1570713-6-dmitry.torokhov@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2026-06-11Input: rmi4 - fix memory leak in rmi_set_attn_data()Dmitry Torokhov
kfifo_put() returns 0 if the FIFO is full. In this case, we must free the memory allocated for the attention data to avoid a leak. Fixes: b908d3cd812a ("Input: synaptics-rmi4 - allow to add attention data") Cc: stable@vger.kernel.org Assisted-by: Gemini:gemini-3.1-pro Link: https://patch.msgid.link/20260505045952.1570713-5-dmitry.torokhov@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2026-06-11Input: rmi4 - initialize attn_fifo properlyDmitry Torokhov
attn_fifo is allocated as part of struct rmi_driver_data using devm_kzalloc in rmi_driver_probe. However, it is never initialized. A zero-initialized kfifo has its mask set to 0, which effectively limits its capacity to 1 element instead of the declared 16. This can lead to lost attention data and memory leaks of the attention data payload if multiple attention events are received before the threaded interrupt handler can process them. Initialize attn_fifo using INIT_KFIFO after allocating rmi_driver_data. Reported-by: sashiko-bot@kernel.org Assisted-by: Antigravity:gemini-3.5-flash Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2026-06-11Input: rmi4 - fix num_subpackets overflow in register descriptorDmitry Torokhov
RMI_REG_DESC_SUBPACKET_BITS is defined as 296 (37 * BITS_PER_BYTE). This may overflow num_subpackets in struct rmi_register_desc_item which is defined as a u8. Fix this by changing the type of num_subpackets to u16. Fixes: 2b6a321da9a2 ("Input: synaptics-rmi4 - add support for Synaptics RMI4 devices") Cc: stable@vger.kernel.org Assisted-by: Gemini:gemini-3.1-pro Link: https://patch.msgid.link/20260505045952.1570713-4-dmitry.torokhov@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2026-06-11Input: rmi4 - fix type overflow in register countsDmitry Torokhov
The number of registers in the RMI4 register descriptor is populated by counting the bits in the presence map using bitmap_weight(). Since the presence map can contain up to 256 bits (RMI_REG_DESC_PRESENSE_BITS), storing this count in a u8 can overflow to 0 if all 256 bits are set. Change the num_registers field in struct rmi_register_descriptor from u8 to u16 to prevent potential integer overflow and ensure safe processing of devices reporting large descriptors. Fixes: 2b6a321da9a2 ("Input: synaptics-rmi4 - add support for Synaptics RMI4 devices") Cc: stable@vger.kernel.org Assisted-by: Gemini:gemini-3.1-pro Link: https://patch.msgid.link/20260505045952.1570713-3-dmitry.torokhov@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2026-06-11Input: rmi4 - refactor register descriptor parsingDmitry Torokhov
Factor out parsing a register descriptor item from rmi_read_register_desc() and ensure there are no out-of-bounds accesses. Use get_unaligned_le16() and get_unaligned_le32() for reading multi-byte values. Reported-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Fixes: 2b6a321da9a2 ("Input: synaptics-rmi4 - add support for Synaptics RMI4 devices") Cc: stable@vger.kernel.org Assisted-by: Gemini:gemini-3.1-pro Link: https://patch.msgid.link/20260505045952.1570713-2-dmitry.torokhov@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2026-06-11Input: rmi4 - fix register descriptor address calculationDmitry Torokhov
When reading the register descriptor, the base address is incremented by 1 to read the presence register block. However, after reading the presence register block, the address is incorrectly incremented by only 1 byte (++addr) instead of the actual size of the presence block (size_presence_reg). This causes the subsequent structure block read to read from the wrong memory location if the presence block is larger than 1 byte. Fix this by advancing the address by size_presence_reg. Fixes: 2b6a321da9a2 ("Input: synaptics-rmi4 - add support for Synaptics RMI4 devices") Cc: stable@vger.kernel.org Assisted-by: Gemini:gemini-3.1-pro Link: https://patch.msgid.link/20260505045952.1570713-1-dmitry.torokhov@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2026-06-10Input: synaptics-rmi4 - unregister function handlers on physical driver ↵Haoxiang Li
registration failure If rmi_register_physical_driver() fails, the current error path unregisters only the RMI bus. The function handlers registered earlier remain registered with the driver core. Add a separate error path to unregister the function handlers before unregistering the bus in this failure case. Fixes: 2b6a321da9a2 ("Input: synaptics-rmi4 - add support for Synaptics RMI4 devices") Signed-off-by: Haoxiang Li <haoxiang_li2024@163.com> Cc: stable@vger.kernel.org Link: https://patch.msgid.link/20260610064633.2837084-1-haoxiang_li2024@163.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2026-05-31Merge tag 'v7.1-rc6' into nextDmitry Torokhov
Sync up with mainline to pull in a fix to IMS PCU driver and other enhancements.
2026-05-30Input: Use named initializers for arrays of i2c_device_dataUwe Kleine-König (The Capable Hub)
While being less compact, using named initializers allows to more easily see which members of the structs are assigned which value without having to lookup the declaration of the struct. And it's also more robust against changes to the struct definition. The mentioned robustness is relevant for a planned change to struct i2c_device_id that replaces .driver_data by an anonymous union. This patch doesn't modify the compiled arrays, only their representation in source form benefits. The former was confirmed with x86 and arm64 builds. Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com> Link: https://patch.msgid.link/20260515164848.497608-2-u.kleine-koenig@baylibre.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2026-04-04Merge tag 'input-for-v7.0-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input fixes from Dmitry Torokhov: - new IDs for BETOP BTP-KP50B/C and Razer Wolverine V3 Pro added to xpad controller driver - another quirk for new TUXEDO InfinityBook added to i8042 - a small fixup for Synaptics RMI4 driver to properly unlock mutex when encountering an error in F54 - an update to bcm5974 touch controller driver to reliably switch into wellspring mode * tag 'input-for-v7.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: xpad - add support for BETOP BTP-KP50B/C controller's wireless mode Input: xpad - add support for Razer Wolverine V3 Pro Input: synaptics-rmi4 - fix a locking bug in an error path Input: i8042 - add TUXEDO InfinityBook Max 16 Gen10 AMD to i8042 quirk table Input: bcm5974 - recover from failed mode switch
2026-02-23Input: synaptics-rmi4 - fix a locking bug in an error pathBart Van Assche
Lock f54->data_mutex when entering the function statement since jumping to the 'error' label when checking report_size fails causes that mutex to be unlocked. This bug has been detected by the Clang thread-safety checker. Fixes: 3a762dbd5347 ("[media] Input: synaptics-rmi4 - add support for F54 diagnostics") Signed-off-by: Bart Van Assche <bvanassche@acm.org> Link: https://patch.msgid.link/20260223215118.2154194-16-bvanassche@acm.org Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2026-02-21Convert 'alloc_obj' family to use the new default GFP_KERNEL argumentLinus Torvalds
This was done entirely with mindless brute force, using git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' | xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/' to convert the new alloc_obj() users that had a simple GFP_KERNEL argument to just drop that argument. Note that due to the extreme simplicity of the scripting, any slightly more complex cases spread over multiple lines would not be triggered: they definitely exist, but this covers the vast bulk of the cases, and the resulting diff is also then easier to check automatically. For the same reason the 'flex' versions will be done as a separate conversion. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2026-02-21treewide: Replace kmalloc with kmalloc_obj for non-scalar typesKees Cook
This is the result of running the Coccinelle script from scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to avoid scalar types (which need careful case-by-case checking), and instead replace kmalloc-family calls that allocate struct or union object instances: Single allocations: kmalloc(sizeof(TYPE), ...) are replaced with: kmalloc_obj(TYPE, ...) Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...) are replaced with: kmalloc_objs(TYPE, COUNT, ...) Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...) are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...) (where TYPE may also be *VAR) The resulting allocations no longer return "void *", instead returning "TYPE *". Signed-off-by: Kees Cook <kees@kernel.org>
2025-09-08Input: synaptics-rmi4 - add includes for types used in rmi_2d_sensor.hDmitry Torokhov
Headers should include definitions for types that they use. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2025-08-21Input: include export.h in modules using EXPORT_SYMBOL*()Dmitry Torokhov
A number of modules in the input subsystem use EXPORT_SYMBOL() and friends without explicitly including the corresponding header <linux/export.h>. While the build currently succeeds due to this header being pulled in transitively, this is not guaranteed to be the case in the future. Let's add the explicit include to make the dependencies clear and prevent future build breakage. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2025-08-03Merge tag 'ib-mfd-gpio-input-pwm-v6.17' of ↵Dmitry Torokhov
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd into next Merge an immutable branch between MFD, GPIO, Input and PWM to resolve conflicts for the merge window pull request.
2025-07-27Input: synaptics-rmi4 - add support for F1AAndré Apitzsch
RMI4 F1A implements capacitive keys. Add support for touch keys found in some Synaptics touch controller configurations. Signed-off-by: André Apitzsch <git@apitzsch.eu> Link: https://lore.kernel.org/r/20250707-rmi4_f1a-v1-2-838d83c72e7f@apitzsch.eu Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2025-07-27Input: synaptics-rmi4 - add support for Forcepads (F21)Marge Yang
Forcepad devices do not have physical buttons underneath the surface and use F21 to report "clicks" based on touch pressure. Signed-off-by: Marge Yang <Marge.Yang@tw.synaptics.com> Link: https://lore.kernel.org/r/20250716033648.1785509-1-marge.yang@tw.synaptics.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2025-05-19Input: synaptics-rmi - fix crash with unsupported versions of F34Dmitry Torokhov
Sysfs interface for updating firmware for RMI devices is available even when F34 probe fails. The code checks for presence of F34 "container" pointer and then tries to use the function data attached to the sub-device. F34 assigns the function data early, before it knows if probe will succeed, leaving behind a stale pointer. Fix this by expanding checks to not only test for presence of F34 "container" but also check if there is driver data assigned to the sub-device, and call dev_set_drvdata() only after we are certain that probe is successful. This is not a complete fix, since F34 will be freed during firmware update, so there is still a race when fetching and accessing this pointer. This race will be addressed in follow-up changes. Reported-by: Hanno Böck <hanno@hboeck.de> Fixes: 29fd0ec2bdbe ("Input: synaptics-rmi4 - add support for F34 device reflash") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/aBlAl6sGulam-Qcx@google.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2025-02-04Input: drop vb2_ops_wait_prepare/finishHans Verkuil
Since commit 88785982a19d ("media: vb2: use lock if wait_prepare/finish are NULL") it is no longer needed to set the wait_prepare/finish vb2_ops callbacks as long as the lock field in vb2_queue is set. Since the vb2_ops_wait_prepare/finish callbacks already rely on that field, we can safely drop these callbacks. This simplifies the code and this is a step towards the goal of deleting these callbacks. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Link: https://lore.kernel.org/r/ec811552-6014-43d4-9fcc-2ac729a8b08e@xs4all.nl Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-11-25Merge tag 'input-for-v6.13-rc0' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: - support for NT36672A touchscreen added to novatek-nvt-ts driver - a change to ads7846 driver to prevent XPT2046 from locking up - a change switching platform input dirves back to using remove() method (from remove_new()) - updates to a number of input drivers to use the new cleanup facilities (__free(...), guard(), and scoped-guard()) which ensure that the resources and locks are released properly and automatically - other assorted driver cleanups and fixes. * tag 'input-for-v6.13-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (109 commits) Input: mpr121 - use devm_regulator_get_enable_read_voltage() Input: sun4i-lradc-keys - don't include 'pm_wakeup.h' directly Input: spear-keyboard - don't include 'pm_wakeup.h' directly Input: cypress-sf - constify struct i2c_device_id Input: ads7846 - increase xfer array size in 'struct ser_req' Input: fix the input_event struct documentation Input: i8042 - fix typo dublicate to duplicate Input: ads7846 - add dummy command register clearing cycle Input: cs40l50 - fix wrong usage of INIT_WORK() Input: introduce notion of passive observers for input handlers Input: maple_keyb - use guard notation when acquiring mutex Input: locomokbd - use guard notation when acquiring spinlock Input: hilkbd - use guard notation when acquiring spinlock Input: synaptics-rmi4 - switch to using cleanup functions in F34 Input: synaptics - fix a typo dt-bindings: input: rotary-encoder: Fix "rotary-encoder,rollover" type Input: omap-keypad - use guard notation when acquiring mutex Input: imagis - fix warning regarding 'imagis_3038_data' being unused Input: userio - remove unneeded semicolon Input: sparcspkr - use cleanup facility for device_node ...
2024-11-04Input: synaptics-rmi4 - switch to using cleanup functions in F34Dmitry Torokhov
Start using __free() and guard() primitives to simplify the code and error handling. Reviewed-by: Lyude Paul <lyude@redhat.com> Link: https://lore.kernel.org/r/Zxwd9c0njasZZoal@google.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-10-04Input: synaptics-rmi4 - use guard notation when pausing serio port in F03Dmitry Torokhov
Using guard notation makes the code more compact and error handling more robust by ensuring that serio ports are resumed in all code paths when control leaves critical section. Link: https://lore.kernel.org/r/20240905041732.2034348-9-dmitry.torokhov@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-10-02move asm/unaligned.h to linux/unaligned.hAl Viro
asm/unaligned.h is always an include of asm-generic/unaligned.h; might as well move that thing to linux/unaligned.h and include that - there's nothing arch-specific in that header. auto-generated by the following: for i in `git grep -l -w asm/unaligned.h`; do sed -i -e "s/asm\/unaligned.h/linux\/unaligned.h/" $i done for i in `git grep -l -w asm-generic/unaligned.h`; do sed -i -e "s/asm-generic\/unaligned.h/linux\/unaligned.h/" $i done git mv include/asm-generic/unaligned.h include/linux/unaligned.h git mv tools/include/asm-generic/unaligned.h tools/include/linux/unaligned.h sed -i -e "/unaligned.h/d" include/asm-generic/Kbuild sed -i -e "s/__ASM_GENERIC/__LINUX/" include/linux/unaligned.h tools/include/linux/unaligned.h
2024-09-05Merge branch 'ib/6.11-rc6-matrix-keypad-spitz' into nextDmitry Torokhov
Bring in changes removing support for platform data from matrix-keypad driver.
2024-09-03Input: synaptics-rmi4 - fix crash when DPM query is not supportedDmitry Torokhov
Stop clobbering "item" variable when checking if the device supports querying DPM values because its original value is still needed in case when we need to fall back to the old way of figuring sensor size. Reported-by: Richard Acayan <mailingradian@gmail.com> Tested-by: Richard Acayan <mailingradian@gmail.com> Fixes: 14d650fcb7fb ("Input: synaptics-rmi4 - add support for querying DPM value (F12)") Link: https://lore.kernel.org/r/ZtdQW7nqAOEJDNBN@radian Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-08-05Input: synaptics-rmi4 - add support for querying DPM value (F12)Marge Yang
Newer firmware allows to query touchpad resolution information by reading from resolution register. Presence of resolution register is signalled via bit 29 of the "register presence" register. On devices that lack this resolution register we fall back to using pitch and number of receivers data to calculate size of the sensor. Signed-off-by: Marge Yang <marge.yang@tw.synaptics.com> Signed-off-by: Vincent Huang <Vincent.Huang@tw.synaptics.com> Link: https://lore.kernel.org/r/20240805083636.1381205-1-marge.yang@tw.synaptics.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-07-03driver core: have match() callback in struct bus_type take a const *Greg Kroah-Hartman
In the match() callback, the struct device_driver * should not be changed, so change the function callback to be a const *. This is one step of many towards making the driver core safe to have struct device_driver in read-only memory. Because the match() callback is in all busses, all busses are modified to handle this properly. This does entail switching some container_of() calls to container_of_const() to properly handle the constant *. For some busses, like PCI and USB and HV, the const * is cast away in the match callback as those busses do want to modify those structures at this point in time (they have a local lock in the driver structure.) That will have to be changed in the future if they wish to have their struct device * in read-only-memory. Cc: Rafael J. Wysocki <rafael@kernel.org> Reviewed-by: Alex Elder <elder@kernel.org> Acked-by: Sumit Garg <sumit.garg@linaro.org> Link: https://lore.kernel.org/r/2024070136-wrongdoer-busily-01e8@gregkh Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-05-27Merge tag 'v6.9' into nextDmitry Torokhov
Sync up with the mainline to bring in the new cleanup API.
2024-05-24Merge tag 'input-for-v6.10-rc0' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: - a change to input core to trim amount of keys data in modalias string in case when a device declares too many keys and they do not fit in uevent buffer instead of reporting an error which results in uevent not being generated at all - support for Machenike G5 Pro Controller added to xpad driver - support for FocalTech FT5452 and FT8719 added to edt-ft5x06 - support for new SPMI vibrator added to pm8xxx-vibrator driver - missing locking added to cyapa touchpad driver - removal of unused fields in various driver structures - explicit initialization of i2c_device_id::driver_data to 0 dropped from input drivers - other assorted fixes and cleanups. * tag 'input-for-v6.10-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (24 commits) Input: edt-ft5x06 - add support for FocalTech FT5452 and FT8719 dt-bindings: input: touchscreen: edt-ft5x06: Document FT5452 and FT8719 support Input: xpad - add support for Machenike G5 Pro Controller Input: try trimming too long modalias strings Input: drop explicit initialization of struct i2c_device_id::driver_data to 0 Input: zet6223 - remove an unused field in struct zet6223_ts Input: chipone_icn8505 - remove an unused field in struct icn8505_data Input: cros_ec_keyb - remove an unused field in struct cros_ec_keyb Input: lpc32xx-keys - remove an unused field in struct lpc32xx_kscan_drv Input: matrix_keypad - remove an unused field in struct matrix_keypad Input: tca6416-keypad - remove unused struct tca6416_drv_data Input: tca6416-keypad - remove an unused field in struct tca6416_keypad_chip Input: da7280 - remove an unused field in struct da7280_haptic Input: ff-core - prefer struct_size over open coded arithmetic Input: cyapa - add missing input core locking to suspend/resume functions input: pm8xxx-vibrator: add new SPMI vibrator support dt-bindings: input: qcom,pm8xxx-vib: add new SPMI vibrator module input: pm8xxx-vibrator: refactor to support new SPMI vibrator Input: pm8xxx-vibrator - correct VIB_MAX_LEVELS calculation Input: sur40 - convert le16 to cpu before use ...
2024-05-22Merge branch 'next' into for-linusDmitry Torokhov
Prepare input updates for 6.10 merge window.
2024-05-13Input: drop explicit initialization of struct i2c_device_id::driver_data to 0Uwe Kleine-König
These drivers don't use the driver_data member of struct i2c_device_id, so don't explicitly initialize this member. This prepares putting driver_data in an anonymous union which requires either no initialization or named designators. But it's also a nice cleanup on its own. While add it, also remove commas after the sentinel entries. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20240509174158.2211071-2-u.kleine-koenig@pengutronix.de Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-03-17Merge tag 'input-for-v6.9-rc0' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: - a new driver for Goodix Berlin I2C and SPI touch controllers - support for IQS7222D v1.1 and v1.2 in iqs7222 driver - support for IST3032C and IST3038B parts in Imagis touchscreen driver - support for touch keys for Imagis touchscreen controllers - support for Snakebyte GAMEPADs in xpad driver - various cleanups and conversions to yaml for device tree bindings - assorted fixes and cleanups - old Synaptics navpoint driver has been removed since the only board that used it (HP iPAQ hx4700) was removed a while ago. * tag 'input-for-v6.9-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (37 commits) Input: xpad - add support for Snakebyte GAMEPADs dt-bindings: input: samsung,s3c6410-keypad: convert to DT Schema Input: imagis - add touch key support dt-bindings: input: imagis: Document touch keys Input: imagis - use FIELD_GET where applicable Input: make input_class constant dt-bindings: input: atmel,captouch: convert bindings to YAML Input: iqs7222 - add support for IQS7222D v1.1 and v1.2 dt-bindings: input: allwinner,sun4i-a10-lrad: drop redundant type from label Input: serio - make serio_bus const Input: synaptics-rmi4 - make rmi_bus_type const Input: xilinx_ps2 - fix kernel-doc for xps2_of_probe function input/touchscreen: imagis: add support for IST3032C dt-bindings: input/touchscreen: imagis: add compatible for IST3032C input/touchscreen: imagis: Add support for Imagis IST3038B dt-bindings: input/touchscreen: Add compatible for IST3038B input/touchscreen: imagis: Correct the maximum touch area value Input: leds - change config symbol dependency for audio mute trigger Input: ti_am335x_tsc - remove redundant assignment to variable config Input: xpad - sort xpad_device by vendor and product ID ...
2024-03-15Merge branch 'next' into for-linusDmitry Torokhov
Prepare input updates for 6.9 merge window.
2024-03-13Merge tag 'spi-v6.9' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi updates from Mark Brown: "This release sees some exciting changes from David Lechner which implements some optimisations that have been talked about for a long time which allows client drivers to pre-prepare SPI messages for repeated or low latency use. This lets us move work out of latency sensitive paths and avoid repeating work for frequently performed operations. As well as being useful in itself this will also be used in future to allow controllers to directly trigger SPI operations (eg, from interrupts). Otherwise this release has mostly been focused on cleanups, plus a couple of new devices: - Support for pre-optimising messages - A big set of updates from Uwe Kleine-König moving drivers to use APIs with more modern terminology for controllers - Major overhaul of the s3c64xx driver - Support for Google GS101 and Samsung Exynos850" * tag 'spi-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (122 commits) spi: Introduce SPI_INVALID_CS and is_valid_cs() spi: Fix types of the last chip select storage variables spi: Consistently use BIT for cs_index_mask spi: Exctract spi_dev_check_cs() helper spi: Exctract spi_set_all_cs_unused() helper spi: s3c64xx: switch exynos850 to new port config data spi: s3c64xx: switch gs101 to new port config data spi: s3c64xx: deprecate fifo_lvl_mask, rx_lvl_offset and port_id spi: s3c64xx: get rid of the OF alias ID dependency spi: s3c64xx: introduce s3c64xx_spi_set_port_id() spi: s3c64xx: let the SPI core determine the bus number spi: s3c64xx: allow FIFO depth to be determined from the compatible spi: s3c64xx: retrieve the FIFO depth from the device tree spi: s3c64xx: determine the fifo depth only once spi: s3c64xx: allow full FIFO masks spi: s3c64xx: define a magic value spi: dt-bindings: introduce FIFO depth properties spi: axi-spi-engine: use struct_size() macro spi: axi-spi-engine: use __counted_by() attribute spi: axi-spi-engine: remove p from struct spi_engine_message_state ...
generated by cgit v1.2.3 (git 2.0.4) at 2026-06-26 22:47:06 +0000