| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull MTD updates from Miquel Raynal:
"MTD:
- prioritize ofpart in physmap-core probing
- conversions to scoped for each OF child loops
Bindings:
- The bulk of the changes consists of binding fixes/updates to
restrict the use of undefined properties, which was mostly
ineffective in the current form because of the nesting of partition
nodes and the lack of compatible strings
- YAML conversions and the addition of a dma-coherent property in the
cdns,hp-nfc driver
SPI NAND:
- support for octal DTR modes (8D-8D-8D)
- support for Foresee F35SQB002G chips
And small misc fixes"
* tag 'mtd/for-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (65 commits)
mtd: spi-nor: hisi-sfc: fix refcounting bug in hisi_spi_nor_register_all()
mtd: spinand: fix NULL pointer dereference in spinand_support_vendor_ops()
mtd: rawnand: pl353: Add message about ECC mode
mtd: rawnand: pl353: Fix software ECC support
mtd: spinand: winbond: Remove unneeded semicolon
dt-bindings: mtd: cdns,hp-nfc: Add dma-coherent property
mtd: spinand: Disable continuous read during probe
mtd: spinand: add Foresee F35SQB002G flash support
mtd: spinand: winbond: W35N octal DTR support
mtd: spinand: Add octal DTR support
mtd: spinand: Warn if using SSDR-only vendor commands in a non SSDR mode
mtd: spinand: Give the bus interface to the configuration helper
mtd: spinand: Propagate the bus interface across core helpers
mtd: spinand: Add support for setting a bus interface
mtd: spinand: Gather all the bus interface steps in one single function
mtd: spinand: winbond: Configure the IO mode after the dummy cycles
mtd: spinand: winbond: Rename IO_MODE register macro
mtd: spinand: winbond: Fix style
mtd: spinand: winbond: Register W35N vendor specific operation
mtd: spinand: winbond: Register W25N vendor specific operation
...
|
|
SPI NAND
- The major feature this release is the support for octal DTR
modes (8D-8D-8D).
- There has been as well a series of conversion to scoped for each OF
child loops.
- Support for Foresee F35SQB002G chips has been added.
Other changes are small fixes.
|
|
This was converted to a _scoped() loop but this of_node_put() was
accidentally left behind which is a double free.
Fixes: aa8cb72c2018 ("mtd: spi-nor: hisi-sfc: Simplify with scoped for each OF child loop")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Pratyush Yadav <pratyush@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
The spinand_support_vendor_ops() helper unconditionally dereferences
info->vendor_ops. For chips that do not define vendor_ops, this pointer
is NULL, leading to a kernel panic during probe:
Unable to handle kernel NULL pointer dereference at virtual address
0000000000000008
Add a guard to return early when vendor_ops is NULL. This prevents the
crash and allows SPI NAND devices without vendor-specific operations to
be probed correctly.
Fixes: fbc7538782f8 ("mtd: spinand: List vendor specific operations and make sure they are supported")
Cc: stable@vger.kernel.org
Signed-off-by: Md Sadre Alam <quic_mdalam@quicinc.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
This just add some information on kernel log about the selected ECC
Signed-off-by: Andrea Scian <andrea.scian@dave.eu>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
We need to set also write_page_raw in ecc structure to allow
choosing SW ECC instead of HW one, otherwise write operation fail.
Fixes: 08d8c62164a322 ("mtd: rawnand: pl353: Add support for the ARM PL353 SMC NAND controller")
Signed-off-by: Andrea Scian <andrea.scian@dave.eu>
Cc: stable@kernel.org
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
Remove unnecessary semicolons reported by Coccinelle/coccicheck and the
semantic patch at scripts/coccinelle/misc/semicolon.cocci.
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
Macronix serial NAND devices with continuous read support do not
clear the configuration register on soft reset and lack a hardware
reset pin. When continuous read is interrupted (e.g., during reboot),
the feature remains enabled at the device level.
With continuous read enabled, the OOB area becomes inaccessible and
all reads are instead directed to the main area. As a result, during
partition allocation as part of MTD device registration, the first two
bytes of the main area for the master block are read and indicate that
the block is bad. This process repeats for every subsequent block for
the partition.
All reads and writes that reference the BBT find no good blocks and
fail.
The only paths for recovery from this state are triggering the
continuous read feature by way of raw MTD reads or through a NAND
device power drain.
Disable continuous read explicitly during spinand probe to ensure
quiescent feature state.
Fixes: 631cfdd0520d ("mtd: spi-nand: Add continuous read support")
Cc: stable@vger.kernel.org
Signed-off-by: David LaPorte <dalaport@amazon.com>
Reviewed-by: Gunnar Kudrjavets <gunnarku@amazon.com>
Reviewed-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull MTD fix from Miquel Raynal:
"A single late MTD fix, which reverts a fix that turned out to be
incorrect.
The observations of the committer was that the number of IDs to be
used to probe a chip was incorrect. It happened to be a limitation of
his controller, not a chip issue. Restore the chip description, a
solution must be found somewhere else"
* tag 'mtd/fixes-for-6.19-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux:
Revert "mtd: spinand: esmt: fix id code for F50D1G41LB"
|
|
Add support of Foresee F35SQB002G spinand flash
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
Extend the support for the W35N chip family by supporting the ODTR bus
interface. The chip is capable to run in this mode, which brings a
significant performance improvement.
1S-8S-8S:
# flash_speed /dev/mtd0 -c1 -d
eraseblock write speed is 7529 KiB/s
eraseblock read speed is 15058 KiB/s
8D-8D-8D:
# flash_speed /dev/mtd0 -c1 -d
eraseblock write speed is 9481 KiB/s
eraseblock read speed is 23272 KiB/s
This is +55% read speed and +26% write speed with the same hardware.
Tests have been conducted with a TI AM62A7 using the Cadence quad SPI
controller.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
Create a new bus interface named ODTR for "octal DTR", which matches the
following pattern: 8D-8D-8D.
Add octal DTR support for all the existing core operations. Add a second
set of templates for this bus interface.
Give the possibility for drivers to register their read, write and
update cache variants as well as their vendor specific operations.
Check the SPI controller driver supports all the octal DTR commands that
we might need before switching to the ODTR bus interface.
Make the switch by calling ->configure_chip() with the ODTR
parameter. Fallback in case this step fails.
If someone ever attempts to suspend a chip in octal DTR mode, there are
changes that it will loose its configuration at resume. Prevent any
problem by explicitly switching back to SSDR while suspending. Note:
there is a limitation in the current approach, page I/Os are not
available as the dirmaps will be created for the ODTR bus interface if
that option is supported and not switched back to SSDR during
suspend. Switching them is possible but would be costly and would not
bring anything as right after resuming we will switch again to ODTR. In
case this capability is used for debug, developpers should mind to
destroy and recreate suitable direct mappings.
Finally, as a side effect, we increase the buffer for reading IDs to
6. No device at this point returns 6 bytes, but we support 5 bytes IDs,
which means in octal DTR mode we have no other choice than reading an
even number of bytes, hence 6.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
Both Macronix and Winbond have chip specific operations which are SSDR
only. Trying to use them in an ODTR setup will fail and doing this is a
pure software bug. Warn explicitly in this case.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
The chip configuration hook is the one responsible to actually switch
the switch between bus interfaces. It is natural to give it the bus
interface we expect with a new parameter. For now the only value we can
give is SSDR, but this is subject to change in the future, so add a bit
of extra logic in the implementations of this callback to make sure
both the core and the chip driver are aligned on the request.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
For now all drivers provide SSDR variants only. When we add support for
ODTR modes, there will be a need to differentiate the type of variant we
target as well as the need to check if we support one or the other type
of operations.
Pass this parameter to lower level helpers, which for now is unused, in
order to simplify the patch introducing ODTR support.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
Create a bus interface enumeration, currently only containing the
one we support: SSDR, for single SDR, so any operation whose command is
sent over a single data line in SDR mode, ie. any operation matching
1S-XX-XX.
The main spinand_device structure gets a new parameter to store this
enumeration, for now unused. Of course it is set to SSDR during the SSDR
templates initialization to further clarify the state we are in at the
moment.
This member is subject to be used to know in which bus configuration we
and be updated by the core when we switch to faster mode(s).
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
Writing the quad enable bit in one helper and doing the chip
configuration in another does not make much sense from a bus interface
setup point of view.
Instead, let's create a broader helper which is going to be in charge of
all the bus configuration steps at once. This will specifically allow to
transition to octal DDR mode, and even fallback to quad (if suppoorted)
or single mode otherwise.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
When we will change the bus interface, the action that actually performs
the transition is the IO mode register write. This means after the IO
mode register write, we should use the new bus interface. But the
->configure_chip() hook itself is not responsible of making this change
official, it is the caller that must act according to the return value.
Reorganize this helper to first configure the dummy cycles before
possibly switching to another bus interface.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
Suffix the macro name with *_REG to align with the rest of the driver.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
Add a missing new line in the middle of the driver.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
Provide the Winbond W35N specific "write VCR register" operation to let
the core verify it is supported by the controller before using it.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
Provide the Winbond W25N specific "select target" operation to let the
core verify it is supported by the controller before using it.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
Provide the Macronix specific "read ECC status register" operation so
that the core can verify if it is supported by the controller before
using it.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
It is probably safe to expect that all SPI controller drivers will ever
support all the most basic SPI NAND operations, such as write enable,
register reads, page program, block erases, etc. However, what about
vendor specific operations? So far nobody complained about it, but as we
are about to introduce octal DTR support, and as none of the SPI NAND
instruction set is defined in any standard, we must remain careful about
these extra operations.
One way to make sure we do not blindly get ourselves in strange
situations with vendor commands failing silently is to make the check
once for all, while probing the chip. However at this stage we have no
such list, so let's add the necessary infrastructure to allow:
- registering vendor operations,
- checking they are actually supported when appropriate.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
Winbond W35N* chips require a vendor specific operation to write their
VCR register (a configuration register, typically used for tuning the
number of dummy cycles and switching to a different bus
interface). Instead of defining this op only in the function that needs
it, hiding it from the core, make it a proper define like all other
spi-mem operations, and implement the necessary spinand_fill_*_op()
helper to make the SPINAND_OP() macro work. This way we can use it from
any function without any extra handling outside of this helper when we
will convert the core to support octal DDR busses.
Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
Winbond W25N* chips require a vendor specific operation to select the
target. Instead of defining this op only in the function that
needs it, hiding it from the core, make it a proper define like all
other spi-mem operations, and implement the necessary
spinand_fill_*_op() helper to make the SPINAND_OP() macro work. This way
we can use it from any function without any extra handling outside of
this helper when we will convert the core to support octal DDR busses.
Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
Macronix chips require a vendor specific operation to read the ECC
status register. Instead of defining this op only in the function that
needs it, hiding it from the core, make it a proper define like all
other spi-mem operations, and implement the necessary
spinand_fill_*_op() helper to make the SPINAND_OP() macro work. This way
we can use it from any function without any extra handling outside of
this helper when we will convert the core to support octal DDR busses.
Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
Create a SPINAND_OP() macro to which we give the name of the operation
we want. This macro retrieves the correct operation template based on
the current bus interface (currently only single SDR, will soon be
extended to octal DTR) and fills it with the usual parameters.
This macro makes the transition from calling directly the low-level
macros into using the (bus interface dependent) templates very smooth.
Use it in all places that can be trivially converted. At this stage
there is no functional change expected, until octal DTR support gets
added.
Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
Currently, the SPI NAND core implementation directly calls macros to get
the various operations in shape. These macros are specific to the bus
interface, currently only supporting the single SDR interface (any
command following the 1S-XX-XX pattern).
Introducing support for other bus interfaces (such as octal DTR) would
mean that every user of these macros should become aware of the current
bus interface and act accordingly, picking up and adapting to the
current configuration. This would add quite a bit of boilerplate, be
repetitive as well as error prone in case we miss one occurrence.
Instead, let's create a table with all SPI NAND memory operations that
are currently supported. We initialize them with the same single SDR _OP
macros as before. This opens the possibility for users of the individual
macros to make use of these templates instead. This way, when we will add
another bus interface, we can just switch to another set of templates
and all users will magically fill in their spi_mem_op structures with
the correct ops.
The existing read, write and update cache variants are also moved in
this template array, which is barely noticeable by callers as we also
add a structure member pointing to it.
Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
In order to introduce templates for all operations and not only for page
helpers (in order to introduce octal DDR support), decouple the WR_EN
and WR_DIS operations into two separate macros.
Adapt the callers accordingly.
There is no functional change.
Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
Replace -ENOTSUPP with -EOPNOTSUPP which is as relevant in this case but
is standard.
Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
The update cache variant is mandatory, both read and write versions are
being checked, but not this one. All chip drivers seem to implement this
variant, so there should be no breakage.
Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
spi: Octal DTR support
This series adds support for 8D-8D-8D in SPI NAND, which can already be
leveraged without any SPI changes as controllers already have this
support for some SPI NOR devices.
Among the few spi-mem patches, they are needed for building the SPI NAND
changes (especially the ODTR introduction at the end) and therefore an
immutable tag will be needed for merging in the MTD tree (unless all the
series goes through MTD directly ofc).
|
|
Place the ofparts before RedBoot partitions in the OF probe
path: this makes it possible to override any existing
RedBoot partitions with fixed-partitions which may be necessary,
such as when you need to repartition the flash from Linux'
point of view but not necessary from the bootloaders point
of view.
This happens when a device such as Raidsonic IB-4220-B has
three partitions named "Kern", "Ramdisk" and "Application"
that we want to merge into one for more efficient use
of the flash memory in OpenWrt.
Signed-off-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
of_get_child_by_name() returns a node pointer with refcount incremented,
which must be released with of_node_put() when done. However, in
parse_fixed_partitions(), when dedicated is true (i.e., a "partitions"
subnode was found), the ofpart_node obtained from of_get_child_by_name()
is never released on any code path.
Add of_node_put(ofpart_node) calls on all exit paths when dedicated is
true to fix the reference count leak.
This bug was detected by our static analysis tool.
Fixes: 562b4e91d3b2 ("mtd: parsers: ofpart: fix parsing subpartitions")
Signed-off-by: Weigang He <geoffreyhe2@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
The function mtd_parser_tplink_safeloader_parse() allocates buf via
mtd_parser_tplink_safeloader_read_table(). If the allocation for
parts[idx].name fails inside the loop, the code jumps to the err_free
label without freeing buf, leading to a memory leak.
Fix this by freeing the temporary buffer buf in the err_free label.
Compile tested only. Issue found using a prototype static analysis tool
and code review.
Fixes: 00a3588084be ("mtd: parsers: add TP-Link SafeLoader partitions table parser")
Signed-off-by: Zilin Guan <zilin@seu.edu.cn>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
UBSAN reports shift-out-of-bounds in jedec_read_mfr() and jedec_read_id():
UBSAN: shift-out-of-bounds in drivers/mtd/chips/jedec_probe.c:1924:13
shift exponent 32 is too large for 32-bit type 'int'
UBSAN: shift-out-of-bounds in drivers/mtd/chips/jedec_probe.c:1940:12
shift exponent 32 is too large for 32-bit type 'int'
The JEDEC manufacturer/device ID masking uses:
(1 << (cfi->device_type * 8)) - 1
When cfi->device_type is 4, this evaluates to 1 << 32. Since the
literal '1' has type int, this is a 32-bit shift and is undefined behavior.
Fix it by using a 64-bit literal (1ULL) so the shift is performed in a 64-bit type.
Co-developed-by: Hui Peng <benquike@gmail.com>
Signed-off-by: Hui Peng <benquike@gmail.com>
Co-developed-by: Zhihao Yao (Zephyr) <zhihao.yao@njit.edu>
Signed-off-by: Zhihao Yao (Zephyr) <zhihao.yao@njit.edu>
Signed-off-by: Chenxi Hou <ch395@njit.edu>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
Drop the driver-specific field_get() and field_prep() macros, in favor
of the globally available variants from <linux/bitfield.h>.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
The regions array is counted by nregions, but it's set only after
accessing it:
[] UBSAN: array-index-out-of-bounds in drivers/mtd/devices/mtd_intel_dg.c:750:15
[] index 0 is out of range for type '<unknown> [*]'
Fix it by also fixing an undesired behavior: the loop silently ignores
ENOMEM and continues setting the other entries.
CC: Gustavo A. R. Silva <gustavoars@kernel.org>
CC: Raag Jadav <raag.jadav@intel.com>
Reported-by: Jani Partanen <jiipee@sotapeli.fi>
Closes: https://lore.kernel.org/all/caca6c67-4f1d-49f1-948f-e63b6b937b29@sotapeli.fi
Fixes: ceb5ab3cb646 ("mtd: add driver for intel graphics non-volatile memory device")
Signed-off-by: Lucas De Marchi <demarchi@kernel.org>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Reviewed-by: Raag Jadav <raag.jadav@intel.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
The Atmel NAND controller driver depends on an SRAM pool and has an
implicit assumption that the SRAM pool has already been created.
Changing the initcall ordering can break this. Unfortunately, fw_devlink
can't save us here as there's not a standard property to track the
dependency. So it's up to deferring probe to save us.
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Tested-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
Currently even if none of the custom parsers are selected a struct
of_device_id and a dummy function that just returns -EOPNOTSUPP is
compiled in for each of them.
Its not obvious from the code but struct of_device_id is massive,
196 or 200 bytes (see link), so this is a lot more wasteful than you'd
think just skimming the code and assuming the wasted size is just the
length of the string with some small overhead.
If they aren't enabled use ifdef's to avoid anything being compiled
in and remove the dummy functions.
Link: https://lore.kernel.org/all/ef59d6fd3b2201b912d5eaa7f7a037d8f9adb744.1636561068.git.geert+renesas@glider.be/
Signed-off-by: Daniel Palmer <daniel@thingy.jp>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
Use scoped for-each loop when iterating over device nodes to make code a
bit simpler.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Acked-by: Pratyush Yadav <pratyush@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
Use scoped for-each loop when iterating over device nodes to make code a
bit simpler.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
"nfc->variant" is an enum, thus cast of pointer on 64-bit compile test
with clang W=1 causes:
vf610_nfc.c:843:17: error: cast to smaller integer type 'enum vf610_nfc_variant' from 'const void *' [-Werror,-Wvoid-pointer-to-enum-cast]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
Use scoped for-each loop when iterating over device nodes to make code a
bit simpler.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
Use scoped for-each loop when iterating over device nodes to make code a
bit simpler.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
Use scoped for-each loop when iterating over device nodes to make code a
bit simpler.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
Use scoped for-each loop when iterating over device nodes to make code a
bit simpler.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
cadence_nand_cdma_send_and_wait() propagates negative errno values
from cadence_nand_cdma_send(), returns -ETIMEDOUT on failure and -EIO
when the CDMA engine reports a command failure.
However, it is declared as u32, causing error codes to wrap.
Change the return type to int to correctly propagate errors.
Fixes: ec4ba01e894d ("mtd: rawnand: Add new Cadence NAND driver to MTD subsystem")
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
In a vain attempt to consolidate the email zoo switch everything to the
kernel.org account.
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
