| Age | Commit message (Collapse) | Author |
|---|
|
port_fdb_dump() is supposed to only add fdb entries, but we iterate over
the full ARL table, which also includes multicast entries.
So check if the entry is a multicast entry before passing it on to the
callback().
Additionally, the port of those entries is a bitmask, not a port number,
so any included entries would have even be for the wrong port.
Fixes: 1da6df85c6fb ("net: dsa: b53: Implement ARL add/del/dump operations")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20251217205756.172123-1-jonas.gorski@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Now that writing ARL entries works properly, we can actually use VID 0
as the default untagged VLAN for BCM5325 and BCM5365 as well.
So use 0 as default PVID for all chips and do not reject VLAN 0 anymore,
which we ignored since commit 45e9d59d3950 ("net: dsa: b53: do not allow
to configure VLAN 0") anyway.
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20251128080625.27181-8-jonas.gorski@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
BCM5325/65's ARL entry registers do not contain the VID, only the search
result register does. ARL entries have a separate VID entry register for
the index into the VLAN table.
So make ARL entry accessors use the VID entry registers instead, and
move the VLAN ID field definition to the search register definition.
Fixes: c45655386e53 ("net: dsa: b53: add support for FDB operations on 5325/5365")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20251128080625.27181-7-jonas.gorski@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We currently use the mask 0xf for writing and reading b53_entry::port,
but this is only correct for unicast ARL entries. Multicast ARL entries
use a bitmask, and 0xf is not enough space for ports > 3, which includes
the CPU port.
So extend the mask accordingly to also fit port 4 (bit 4) and MII (bit
5). According to the datasheet the multicast port mask is [60:48],
making it 12 bit wide, but bits 60-55 are reserved anyway, and collide
with the priority field at [60:59], so I am not sure if this is valid.
Therefore leave it at the actual used range, [53:48].
The ARL search result register differs a bit, and there the mask is only
[52:48], so only spanning the user ports. The MII port bit is
contained in the Search Result Extension register. So create a separate
search result parse function that properly handles this.
Fixes: c45655386e53 ("net: dsa: b53: add support for FDB operations on 5325/5365")
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Link: https://patch.msgid.link/20251128080625.27181-6-jonas.gorski@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
On BCM5325 and BCM5365, unicast ARL entries use 8 as the value for the
CPU port, so we need to translate it to/from 5 as used for the CPU port
at most other places.
Fixes: c45655386e53 ("net: dsa: b53: add support for FDB operations on 5325/5365")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20251128080625.27181-5-jonas.gorski@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
BCM5365's search result is at the same offset as BCM5325's search
result, and they (mostly) share the same format, so switch BCM5365 to
BCM5325's arl ops.
Fixes: c45655386e53 ("net: dsa: b53: add support for FDB operations on 5325/5365")
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Tested-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Link: https://patch.msgid.link/20251128080625.27181-4-jonas.gorski@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
BCM5325/65's Entry register uses the highest three bits for
VALID/STATIC/AGE, so shifting by 53 only will add these to
b53_arl_entry::vid.
So make sure to mask the vid value as well, to not get invalid VIDs.
Fixes: c45655386e53 ("net: dsa: b53: add support for FDB operations on 5325/5365")
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Tested-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Link: https://patch.msgid.link/20251128080625.27181-3-jonas.gorski@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since BCM5325 and BCM5365 only support up to 256 VLANs, the VLAN_ID_IDX
register is only 8 bit wide, not 16 bit, so use an appropriate accessor.
Fixes: c45655386e53 ("net: dsa: b53: add support for FDB operations on 5325/5365")
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Tested-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Link: https://patch.msgid.link/20251128080625.27181-2-jonas.gorski@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The ARL registers of BCM63XX embedded switches are somewhat unique. The
normal ARL table access registers have the same format as BCM5389, but
the ARL search registers differ:
* SRCH_CTL is at the same offset of BCM5389, but 16 bits wide. It does
not have more fields, just needs to be accessed by a 16 bit read.
* SRCH_RSLT_MACVID and SRCH_RSLT are aligned to 32 bit, and have shifted
offsets.
* SRCH_RSLT has a different format than the normal ARL data entry
register.
* There is only one set of ENTRY_N registers, implying a 1 bin layout.
So add appropriate ops for bcm63xx and let it use it.
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20251107080749.26936-9-jonas.gorski@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
BCM5389, BCM5397 and BCM5398 use a different ARL entry format with just
a 16 bit fwdentry register, as well as different search control and data
offsets.
So add appropriate ops for them and switch those chips to use them.
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20251107080749.26936-8-jonas.gorski@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Now that the differences in ARL entry formats are neatly contained into
functions per chip family, wrap them into an ops struct and add wrapper
functions to access them.
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20251107080749.26936-7-jonas.gorski@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Split reading search entries into a function for each format.
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20251107080749.26936-6-jonas.gorski@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In order to more easily support more formats, move accessing
ARL_SRCH_CTL into helper functions to contain the differences.
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20251107080749.26936-5-jonas.gorski@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Move writing ARL entries into individual functions for each format.
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20251107080749.26936-4-jonas.gorski@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Instead of duplicating the whole code iterating over all bins for
BCM5325, factor out reading and parsing the entry into its own
functions, and name it the modern one after the first chip with that ARL
format, (BCM53)95.
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20251107080749.26936-3-jonas.gorski@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Align the b53_arl_read{,25}() functions by consistently using the
parsed arl entry instead of parsing the raw registers again.
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20251107080749.26936-2-jonas.gorski@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR (net-6.18-rc5).
Conflicts:
drivers/net/wireless/ath/ath12k/mac.c
9222582ec524 ("Revert "wifi: ath12k: Fix missing station power save configuration"")
6917e268c433 ("wifi: ath12k: Defer vdev bring-up until CSA finalize to avoid stale beacon")
https://lore.kernel.org/11cece9f7e36c12efd732baa5718239b1bf8c950.camel@sipsolutions.net
Adjacent changes:
drivers/net/ethernet/intel/Kconfig
b1d16f7c0063 ("libie: depend on DEBUG_FS when building LIBIE_FWLOG")
93f53db9f9dc ("ice: switch to Page Pool")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When iterating over the ARL table we stop at max ARL entries / 2, but
this is only valid if the chip actually returns 2 results at once. For
chips with only one result register we will stop before reaching the end
of the table if it is more than half full.
Fix this by only dividing the maximum results by two if we have a chip
with more than one result register (i.e. those with 4 ARL bins).
Fixes: cd169d799bee ("net: dsa: b53: Bound check ARL searches")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20251102100758.28352-4-jonas.gorski@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The switch clears the ARL_SRCH_STDN bit when the search is done, i.e. it
finished traversing the ARL table.
This means that there will be no valid result, so we should not attempt
to read and process any further entries.
We only ever check the validity of the entries for 4 ARL bin chips, and
only after having passed the first entry to the b53_fdb_copy().
This means that we always pass an invalid entry at the end to the
b53_fdb_copy(). b53_fdb_copy() does check the validity though before
passing on the entry, so it never gets passed on.
On < 4 ARL bin chips, we will even continue reading invalid entries
until we reach the result limit.
Fixes: 1da6df85c6fb ("net: dsa: b53: Implement ARL add/del/dump operations")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20251102100758.28352-3-jonas.gorski@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In the New Control register bit 1 is either reserved, or has a different
function:
Out of Range Error Discard
When enabled, the ingress port discards any frames
if the Length field is between 1500 and 1536
(excluding 1500 and 1536) and with good CRC.
The actual bit for enabling IP multicast is bit 0, which was only
explicitly enabled for BCM5325 so far.
For older switch chips, this bit defaults to 0, so we want to enable it
as well, while newer switch chips default to 1, and their documentation
says "It is illegal to set this bit to zero."
So drop the wrong B53_IPMC_FWD_EN define, enable the IP multicast bit
also for other switch chips. While at it, rename it to (B53_)IP_MC as
that is how it is called in Broadcom code.
Fixes: 63cc54a6f073 ("net: dsa: b53: Fix egress flooding settings")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20251102100758.28352-2-jonas.gorski@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
BCM63XX's switch does not support MDIO scanning of external phys, so its
MACs needs to be manually configured for autonegotiated link speeds.
So b53_force_port_config() and b53_force_link() accordingly also when
mode is MLO_AN_PHY for those ports.
Fixes lower speeds than 1000/full on rgmii ports 4 - 7.
This aligns the behaviour with the old bcm63xx_enetsw driver for those
ports.
Fixes: 967dd82ffc52 ("net: dsa: b53: Add support for Broadcom RoboSwitch")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20251101132807.50419-3-jonas.gorski@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There is no guarantee that the port state override registers have their
default values, as not all switches support being reset via register or
have a reset GPIO.
So when forcing port config, we need to make sure to clear all fields,
which we currently do not do for the speed and flow control
configuration. This can cause flow control stay enabled, or in the case
of speed becoming an illegal value, e.g. configured for 1G (0x2), then
setting 100M (0x1), results in 0x3 which is invalid.
For PORT_OVERRIDE_SPEED_2000M we need to make sure to only clear it on
supported chips, as the bit can have different meanings on other chips,
e.g. for BCM5389 this controls scanning PHYs for link/speed
configuration.
Fixes: 5e004460f874 ("net: dsa: b53: Add helper to set link parameters")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20251101132807.50419-2-jonas.gorski@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Implement port isolation support via the Protected Ports register.
Protected ports can only communicate with unprotected ports, but not
with each other, matching the expected behaviour of isolated ports.
Tested on BCM963268BU.
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://patch.msgid.link/20251013152834.100169-1-jonas.gorski@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR (net-6.17-rc6).
Conflicts:
net/netfilter/nft_set_pipapo.c
net/netfilter/nft_set_pipapo_avx2.c
c4eaca2e1052 ("netfilter: nft_set_pipapo: don't check genbit from packetpath lookups")
84c1da7b38d9 ("netfilter: nft_set_pipapo: use avx2 algorithm for insertions too")
Only trivial adjacent changes (in a doc and a Makefile).
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
For some reason Broadcom decided that BCM53101 uses 0.5s increments for
the ageing time register, but kept the field width the same [1]. Due to
this, the actual ageing time was always half of what was configured.
Fix this by adapting the limits and value calculation for BCM53101.
So far it looks like this is the only chip with the increased tick
speed:
$ grep -l -r "Specifies the aging time in 0.5 seconds" cdk/PKG/chip | sort
cdk/PKG/chip/bcm53101/bcm53101_a0_defs.h
$ grep -l -r "Specifies the aging time in seconds" cdk/PKG/chip | sort
cdk/PKG/chip/bcm53010/bcm53010_a0_defs.h
cdk/PKG/chip/bcm53020/bcm53020_a0_defs.h
cdk/PKG/chip/bcm53084/bcm53084_a0_defs.h
cdk/PKG/chip/bcm53115/bcm53115_a0_defs.h
cdk/PKG/chip/bcm53118/bcm53118_a0_defs.h
cdk/PKG/chip/bcm53125/bcm53125_a0_defs.h
cdk/PKG/chip/bcm53128/bcm53128_a0_defs.h
cdk/PKG/chip/bcm53134/bcm53134_a0_defs.h
cdk/PKG/chip/bcm53242/bcm53242_a0_defs.h
cdk/PKG/chip/bcm53262/bcm53262_a0_defs.h
cdk/PKG/chip/bcm53280/bcm53280_a0_defs.h
cdk/PKG/chip/bcm53280/bcm53280_b0_defs.h
cdk/PKG/chip/bcm53600/bcm53600_a0_defs.h
cdk/PKG/chip/bcm89500/bcm89500_a0_defs.h
[1] https://github.com/Broadcom/OpenMDK/blob/a5d3fc9b12af3eeb68f2ca0ce7ec4056cd14d6c2/cdk/PKG/chip/bcm53101/bcm53101_a0_defs.h#L28966
Fixes: e39d14a760c0 ("net: dsa: b53: implement setting ageing time")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20250905124507.59186-1-jonas.gorski@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR (net-6.17-rc3).
No conflicts or adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When BCM5325 support was added in c45655386e53 ("net: dsa: b53: add
support for FDB operations on 5325/5365"), the register used for ARL access
was made conditional on the chip.
But in b53_fdb_dump(), instead of the register argument the page
argument was replaced, causing it to write to a reserved page 0x50 on
!BCM5325*. Writing to this page seems to completely lock the switch up:
[ 89.680000] b53-switch spi0.1 lan2: Link is Down
[ 89.680000] WARNING: CPU: 1 PID: 26 at drivers/net/phy/phy.c:1350 _phy_state_machine+0x1bc/0x454
[ 89.720000] phy_check_link_status+0x0/0x114: returned: -5
[ 89.730000] Modules linked in: nft_fib_inet nf_flow_table_inet nft_reject_ipv6 nft_reject_ipv4 nft_reject_inet nft_reject nft_redir nft_quota nft_numgen nft_nat nft_masq nft_log nft_limit nft_hash nft_flow_offload nft_fib_ipv6 nft_fib_ipv4 nft_fib nft_ct nft_chain_nat nf_tables nf_nat nf_flow_table nf_conntrack nfnetlink nf_reject_ipv6 nf_reject_ipv4 nf_log_syslog nf_defrag_ipv6 nf_defrag_ipv4 cls_flower sch_tbf sch_ingress sch_htb sch_hfsc em_u32 cls_u32 cls_route cls_matchall cls_fw cls_flow cls_basic act_skbedit act_mirred act_gact vrf md5 crc32c_cryptoapi
[ 89.780000] CPU: 1 UID: 0 PID: 26 Comm: kworker/u10:0 Tainted: G W 6.16.0-rc1+ #0 NONE
[ 89.780000] Tainted: [W]=WARN
[ 89.780000] Hardware name: Netgear DGND3700 v1
[ 89.780000] Workqueue: events_power_efficient phy_state_machine
[ 89.780000] Stack : 809c762c 8006b050 00000001 820a9ce3 0000114c 000affff 805d22d0 8200ba00
[ 89.780000] 82005000 6576656e 74735f70 6f776572 5f656666 10008b00 820a9cb8 82088700
[ 89.780000] 00000000 00000000 809c762c 820a9a98 00000000 00000000 ffffefff 80a7a76c
[ 89.780000] 80a70000 820a9af8 80a70000 80a70000 80a70000 00000000 809c762c 820a9dd4
[ 89.780000] 00000000 805d1494 80a029e4 80a70000 00000003 00000000 00000004 81a60004
[ 89.780000] ...
[ 89.780000] Call Trace:
[ 89.780000] [<800228b8>] show_stack+0x38/0x118
[ 89.780000] [<8001afc4>] dump_stack_lvl+0x6c/0xac
[ 89.780000] [<80046b90>] __warn+0x9c/0x114
[ 89.780000] [<80046da8>] warn_slowpath_fmt+0x1a0/0x1b0
[ 89.780000] [<805d1494>] _phy_state_machine+0x1bc/0x454
[ 89.780000] [<805d22fc>] phy_state_machine+0x2c/0x70
[ 89.780000] [<80066b08>] process_one_work+0x1e8/0x3e0
[ 89.780000] [<80067a1c>] worker_thread+0x354/0x4e4
[ 89.780000] [<800706cc>] kthread+0x130/0x274
[ 89.780000] [<8001d808>] ret_from_kernel_thread+0x14/0x1c
And any further accesses fail:
[ 120.790000] b53-switch spi0.1: timeout waiting for ARL to finish: 0x81
[ 120.800000] b53-switch spi0.1: port 2 failed to add 2c:b0:5d:27:9a:bd vid 3 to fdb: -145
[ 121.010000] b53-switch spi0.1: timeout waiting for ARL to finish: 0xbf
[ 121.020000] b53-switch spi0.1: port 3 failed to add 2c:b0:5d:27:9a:bd vid 3 to fdb: -145
Restore the correct page B53_ARLIO_PAGE again, and move the offset
argument to the correct place.
*On BCM5325, this became a write to the MIB page of Port 1. Still
a reserved offset, but likely less brokenness from that write.
Fixes: c45655386e53 ("net: dsa: b53: add support for FDB operations on 5325/5365")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20250815201809.549195-1-jonas.gorski@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add check for gphy in enable/disable phy calls and set power bits
in gphy control register.
Signed-off-by: Kyle Hendry <kylehendrydev@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20250814002530.5866-3-kylehendrydev@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add gphy mask to bcm63xx phy info struct and add data for bcm63268
Signed-off-by: Kyle Hendry <kylehendrydev@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20250814002530.5866-2-kylehendrydev@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Implement the phy enable/disable calls for b53 mmap, and
set the power down registers in the ephy control register
appropriately.
Signed-off-by: Kyle Hendry <kylehendrydev@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20250724035300.20497-8-kylehendrydev@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add ephy register info for bcm6368.
Signed-off-by: Kyle Hendry <kylehendrydev@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20250724035300.20497-7-kylehendrydev@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add ephy register info for bcm6318, which also applies to
bcm6328 and bcm6362.
Signed-off-by: Kyle Hendry <kylehendrydev@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20250724035300.20497-6-kylehendrydev@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
On bcm63xx SoCs there are registers that control the PHYs in
the GPIO controller. Allow the b53 driver to access them
by passing in the syscon through the device tree.
Add a structure to describe the ephy control register
and add register info for bcm63268.
Signed-off-by: Kyle Hendry <kylehendrydev@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20250724035300.20497-5-kylehendrydev@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add defines for bcm6318, bcm6328, bcm6362, bcm6368 chip IDs,
update tables and switch init.
Signed-off-by: Kyle Hendry <kylehendrydev@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20250724035300.20497-4-kylehendrydev@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add phy enable/disable to b53 ops to be called when
enabling/disabling ports.
Signed-off-by: Kyle Hendry <kylehendrydev@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20250724035300.20497-2-kylehendrydev@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
According to the datasheet, BCM5325 uses B53_PD_MODE_CTRL_25 register to
disable clocking to individual PHYs.
Only ports 1-4 can be enabled or disabled and the datasheet is explicit
about not toggling BIT(0) since it disables the PLL power and the switch.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20250614080000.1884236-15-noltari@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
CPU port should be B53_CPU_PORT instead of B53_CPU_PORT_25 for
B53_PVLAN_PORT_MASK register.
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Link: https://patch.msgid.link/20250614080000.1884236-14-noltari@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
BCM5325 doesn't implement UC_FLOOD_MASK, MC_FLOOD_MASK and IPMC_FLOOD_MASK
registers.
This has to be handled differently with other pages and registers.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20250614080000.1884236-13-noltari@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
BCM5325 doesn't implement GMII_PORT_OVERRIDE_CTRL register so we should
avoid reading or writing it.
PORT_OVERRIDE_RX_FLOW and PORT_OVERRIDE_TX_FLOW aren't defined on BCM5325
and we should use PORT_OVERRIDE_LP_FLOW_25 instead.
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Link: https://patch.msgid.link/20250614080000.1884236-12-noltari@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Older switches don't implement BRCM_HDR register so we should avoid
reading or writing it.
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Link: https://patch.msgid.link/20250614080000.1884236-11-noltari@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
BCM5325 doesn't implement DIS_LEARNING register so we should avoid reading
or writing it.
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Link: https://patch.msgid.link/20250614080000.1884236-10-noltari@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
BCM5325 doesn't implement B53_UC_FWD_EN, B53_MC_FWD_EN or B53_IPMC_FWD_EN.
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Link: https://patch.msgid.link/20250614080000.1884236-9-noltari@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
BCM5325 doesn't implement SWITCH_CTRL register so we should avoid reading
or writing it.
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Link: https://patch.msgid.link/20250614080000.1884236-8-noltari@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
BCM5325 doesn't implement FAST_AGE registers so we should avoid reading or
writing them.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20250614080000.1884236-7-noltari@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
BCM5325 and BCM5365 are part of a much older generation of switches which,
due to their limited number of ports and VLAN entries (up to 256) allowed
a single 64-bit register to hold a full ARL entry.
This requires a little bit of massaging when reading, writing and
converting ARL entries in both directions.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Link: https://patch.msgid.link/20250614080000.1884236-6-noltari@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We need to be able to differentiate the BCM5325 variants because:
- BCM5325M switches lack the ARLIO_PAGE->VLAN_ID_IDX register.
- BCM5325E have less 512 ARL buckets instead of 1024.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20250614080000.1884236-5-noltari@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit 46c5176c586c ("net: dsa: b53: support legacy tags") introduced
support for legacy tags, but it turns out that BCM5325 and BCM5365
switches require the original FCS value and length, so they have to be
treated differently.
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Link: https://patch.msgid.link/20250614080000.1884236-4-noltari@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When Linux sends out untagged traffic from a port, it will enter the CPU
port without any VLAN tag, even if the port is a member of a vlan
filtering bridge with a PVID egress untagged VLAN.
This makes the CPU port's PVID take effect, and the PVID's VLAN
table entry controls if the packet will be tagged on egress.
Since commit 45e9d59d3950 ("net: dsa: b53: do not allow to configure
VLAN 0") we remove bridged ports from VLAN 0 when joining or leaving a
VLAN aware bridge. But we also clear the untagged bit, causing untagged
traffic from the controller to become tagged with VID 0 (and priority
0).
Fix this by not touching the untagged map of VLAN 0. Additionally,
always keep the CPU port as a member, as the untag map is only effective
as long as there is at least one member, and we would remove it when
bridging all ports and leaving no standalone ports.
Since Linux (and the switch) treats VLAN 0 tagged traffic like untagged,
the actual impact of this is rather low, but this also prevented earlier
detection of the issue.
Fixes: 45e9d59d3950 ("net: dsa: b53: do not allow to configure VLAN 0")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://patch.msgid.link/20250602194914.1011890-1-jonas.gorski@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
According to OpenMDK, bit 2 of the RGMII register has a different
meaning for BCM53115 [1]:
"DLL_IQQD 1: In the IDDQ mode, power is down0: Normal function
mode"
Configuring RGMII delay works without setting this bit, so let's keep it
at the default. For other chips, we always set it, so not clearing it
is not an issue.
One would assume BCM53118 works the same, but OpenMDK is not quite sure
what this bit actually means [2]:
"BYPASS_IMP_2NS_DEL #1: In the IDDQ mode, power is down#0: Normal
function mode1: Bypass dll65_2ns_del IP0: Use
dll65_2ns_del IP"
So lets keep setting it for now.
[1] https://github.com/Broadcom-Network-Switching-Software/OpenMDK/blob/master/cdk/PKG/chip/bcm53115/bcm53115_a0_defs.h#L19871
[2] https://github.com/Broadcom-Network-Switching-Software/OpenMDK/blob/master/cdk/PKG/chip/bcm53118/bcm53118_a0_defs.h#L14392
Fixes: 967dd82ffc52 ("net: dsa: b53: Add support for Broadcom RoboSwitch")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Link: https://patch.msgid.link/20250602193953.1010487-6-jonas.gorski@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add RGMII to supported interfaces for BCM63xx RGMII ports so they can be
actually used in RGMII mode.
Without this, phylink will fail to configure them:
[ 3.580000] b53-switch 10700000.switch GbE3 (uninitialized): validation of rgmii with support 0000000,00000000,00000000,000062ff and advertisement 0000000,00000000,00000000,000062ff failed: -EINVAL
[ 3.600000] b53-switch 10700000.switch GbE3 (uninitialized): failed to connect to PHY: -EINVAL
[ 3.610000] b53-switch 10700000.switch GbE3 (uninitialized): error -22 setting up PHY for tree 0, switch 0, port 4
Fixes: ce3bf94871f7 ("net: dsa: b53: add support for BCM63xx RGMIIs")
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Link: https://patch.msgid.link/20250602193953.1010487-5-jonas.gorski@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
