| Age | Commit message (Collapse) | Author |
|---|
|
Switch from <module>-objs to <module>-y to eliminate ifdefs and simplify
conditional object list construction. Drop the obsolete trailing
comment.
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Reviewed-by: Alvin Šipraga <alvin.sipraga@analog.com>
Link: https://patch.msgid.link/20261019-realtek_mkf-v1-1-3246a77d5782@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The buffer has never been used. Remove it.
Signed-off-by: Thorsten Blum <blum@kernel.org>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20261011131208.272131-3-blum@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Refactor register bitmask definitions to use the standard BIT() and
GENMASK() macros instead of hardcoded hexadecimal values. This improves
code readability, reducing the chance of errors such as unintentional
gaps or overlaps.
Introduce RTL8365MB_PORT_MASK as an alias for GENMASK(10, 0) to replace
the repetitive 0x07FF values used across various port-related bitfields.
This is a pure refactoring patch; no functional changes are introduced.
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Reviewed-by: Alvin Šipraga <alvin.sipraga@analog.com>
Link: https://patch.msgid.link/20261002-realtek_bit-v1-1-771fb0e39083@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add EEE support on the integrated-PHY ports, controllable per port via
ethtool.
The integrated PHYs have no MMD registers; their EEE registers live in the
switch's OCP space. phylib accesses EEE as MMD registers, so add
phy_{read,write}_c45 realtek_ops that map those MMD accesses onto their OCP
addresses, wired as the user MII bus C45 handlers when the chip provides
them (rtl8366rb etc. unaffected).
The hardware manages LPI on its own, so advertise EEE to phylink with no-op
mac_{en,dis}able_tx_lpi callbacks. The integrated PHYs advertise EEE by
default -- advertised, not necessarily active, since LPI is entered only
once both link partners advertise it and the link idles. No strap pin
selects EEE in the vendor register map, so on the hardware tested this
default is uniform and not board-specific, and marking EEE enabled by
default in phylink matches the PHY's power-on advertisement. Only the
integrated-PHY ports support EEE; the external RGMII ports do not. The LPI
timer is a single global per-speed register, so .set_mac_eee rejects the
per-port TX LPI knobs rather than silently ignoring them.
This assumes the integrated PHYs advertise EEE out of reset regardless of
board configuration; should a strap or other non-kernel mechanism disable
EEE advertisement on some board or chip in the family, enabling it by
default here would change that default behaviour.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Reviewed-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Link: https://patch.msgid.link/20260918091722.3270534-4-o.rempel@pengutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Extract the two OCP address halves with FIELD_GET() before handing them
to FIELD_PREP() to build the ADDRESS register value.
rtl8365mb_phy_ocp_prepare() previously fed FIELD_PREP() the raw
ocp_addr >> 1 and >> 6. FIELD_PREP() masks the value to the field at run
time, so that was correct for the current callers, which all pass a
run-time register address.
FIELD_PREP()'s compile-time width check only fires for a compile-time
constant value. None reached it here: the address is computed as
PHYREG_BASE + regnum * 2 from a run-time regnum. The EEE support that
follows adds callers with constant OCP addresses (0xa5c4 etc.); clang
folds those into the inlined ocp_prepare(), so the shifted constant now
reaches the check, overflows the 5-/4-bit field and breaks the build
(gcc does not fold it here). FIELD_GET() narrows each half to the field
width first, so the value already fits.
No functional change.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20260918091722.3270534-3-o.rempel@pengutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Since sentinel is the last entry and we do not expect further entries
following it, remove the comma.
Reviewed-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Link: https://patch.msgid.link/20260904043724.2955444-22-s-vadapalli@ti.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since sentinel is the last entry and we do not expect further entries
following it, remove the comma.
Reviewed-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Link: https://patch.msgid.link/20260904043724.2955444-21-s-vadapalli@ti.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Replace the open-coded dev_err() + ERR_CAST() on the reset GPIO error
path with dev_err_cast_probe(), matching the reset controller above and
staying quiet on -EPROBE_DEFER.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Link: https://patch.msgid.link/20260831123637.666457-4-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The power supplies powering the IC may not necessarily be enabled by the
time the driver probes. The binding describes the power rails, so enable
them at probe with devm_regulator_bulk_get_enable(), before the reset line
is requested and driven, so the chip is powered before its pins are driven.
Boards that do not describe these supplies fall back to dummy regulators
(with a "supply not found" warning) and keep working as before.
A board that describes supplies but no reset line still needs to wait for
the chip to boot before the first register access, so apply the existing
start delay in that case too.
Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Co-developed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Reviewed-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Link: https://patch.msgid.link/20260831123637.666457-3-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Merge in late fixes in preparation for the net-next PR.
Conflicts:
drivers/dpll/dpll_core.c
drivers/dpll/dpll_netlink.c
33f016b23a219 ("dpll: fix NULL deref in dpll_device_ops() during teardown race")
b1d0c412088e3 ("dpll: add STATE_CONNECTED_OVERRIDE pin capability")
https://lore.kernel.org/aoR9YYY2P5--3x0N@sirena.org.uk
https://lore.kernel.org/aoR9VmKllVGwmQn_@sirena.org.uk
No adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
rtl83xx_reset_assert() and rtl83xx_reset_deassert() are only called from
the probe path, which may sleep and is not timing-critical. When the
reset GPIO is provided by a sleeping controller such as an I2C I/O
expander, gpiod_set_value() warns:
WARNING: drivers/gpio/gpiolib.c:4030 at gpiod_set_value+0x44/0x80, CPU#1: kworker/u16:4/61
Hardware name: B&O MAP CA33 Rev f (UNKNOWN) (DT)
Workqueue: events_unbound deferred_probe_work_func
pc : gpiod_set_value+0x44/0x80
lr : rtl83xx_probe+0x1d8/0x3a0
Call trace:
gpiod_set_value+0x44/0x80 (P)
rtl83xx_probe+0x1d8/0x3a0
realtek_mdio_probe+0x24/0xa0
mdio_probe+0x38/0x78
really_probe+0xc4/0x3e0
__driver_probe_device+0x15c/0x1b8
driver_probe_device+0xb4/0x120
__device_attach_driver+0xb8/0x1a0
bus_for_each_drv+0x88/0xf0
__device_attach+0xa0/0x1d8
device_initial_probe+0x54/0x68
bus_probe_device+0x38/0xa0
deferred_probe_work_func+0xb8/0x120
process_one_work+0x184/0x4e8
worker_thread+0x188/0x308
kthread+0x130/0x150
ret_from_fork+0x10/0x20
Switch both helpers to gpiod_set_value_cansleep() so such a reset GPIO can
be used without triggering the warning.
The reset GPIO has been driven with the non-sleeping gpiod_set_value()
since the driver was added in v4.19. The call has since been refactored
across several files - from realtek-smi.c / realtek-mdio.c into the common
rtl83xx.c module and then into the rtl83xx_reset_assert() and
rtl83xx_reset_deassert() helpers (both in v6.9). This patch therefore
applies as-is only to kernels that carry those helpers (v6.9+); older
stable kernels need the same gpiod_set_value_cansleep() conversion at the
corresponding open-coded call sites.
Fixes: d8652956cf37 ("net: dsa: realtek-smi: Add Realtek SMI driver")
Cc: <stable@vger.kernel.org> # 6.9.x
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Co-developed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Alvin Šipraga <alvin.sipraga@analog.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Reviewed-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Link: https://patch.msgid.link/20260814110102.2362246-1-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Sashiko reports that we incorrectly disable isolation in the setup
loop while what we want to do is to enable it.
Enable it by unconditionally setting the enable bit 0 in
rtl8366rb_port_set_isolation() so a mask of 0 when passed in
will enable isolation and isolate from ALL ports.
Fix up the comments so it is clear what is going on, including a
missing word in the helper function.
Reported-by: Paolo Abeni <pabeni@redhat.com>
Closes: https://sashiko.dev/#/patchset/20260630-rtl8366rb-improvements-v2-0-05eb9d6a37f5%40kernel.org
Signed-off-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20260731-rtl8366rb-fixes-v4-1-fbf0c95b829a@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR (net-7.2-rc6).
No conflicts.
Adjacent changes:
net/ipv4/route.c
dbc3791e3b24 ("net: do not send ICMP/NDISC Redirects when peer allocation fails")
7804eaa057fe ("ipv4: snapshot dst.dev in ip_rt_send_redirect() and ip_rt_get_source()")
drivers/net/tun.c
23dad2d088df ("tun: no longer rely on RTNL in tun_fill_info()")
c3da92af07ea ("Revert "tun/tap: add ptr_ring consume helper with netdev queue wakeup"")
drivers/net/ethernet/marvell/octeontx2/af/rvu_npc.c
3bd438a58e91 ("octeontx2-af: Block VFs from clobbering special CGX PKIND state")
5ba5611ef946 ("octeontx2-af: reserve 4 PKINDs for skip-size custom use")
drivers/net/wireless/ath/ath12k/core.h
drivers/net/wireless/ath/ath12k/mac.c
drivers/net/wireless/ath/ath12k/peer.c
469d7e6077c1 ("wifi: ath12k: resolve PENDING ML peer ID from MLO_PEER_MAP HTT event")
378e659029d5 ("wifi: ath12k: introduce host_alloc_ml_id hardware parameter")
c42b27336eef ("wifi: ath12k: fix survey indexing across bands")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
With CONFIG_DEBUG_MUTEXES enabled, mutex_destroy() needs to be called
before the lock is discarded. Use devm_mutex_init() instead so the
cleanup is handled automatically.
Fixes: 336e3e4a1ab37 ("net: dsa: realtek: rtl8365mb: add FDB support")
Reviewed-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Reviewed-by: Alvin Šipraga <alvin.sipraga@analog.com>
Link: https://patch.msgid.link/20260726-realtek_mutext-v2-4-5d62ba998791@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
With CONFIG_DEBUG_MUTEXES enabled, mutex_destroy() needs to be called
before the lock is discarded. Use devm_mutex_init() instead so the
cleanup is handled automatically.
Fixes: 9da2c8672f771 ("net: dsa: realtek: rtl8365mb: add VLAN support")
Reviewed-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Reviewed-by: Alvin Šipraga <alvin.sipraga@analog.com>
Link: https://patch.msgid.link/20260726-realtek_mutext-v2-3-5d62ba998791@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
With CONFIG_DEBUG_MUTEXES enabled, mutex_destroy() needs to be called
before the lock is discarded. Use devm_mutex_init() instead so the
cleanup is handled automatically.
Fixes: 907e772f6f6de ("net: dsa: realtek: allow subdrivers to externally lock regmap")
Reviewed-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Reviewed-by: Alvin Šipraga <alvin.sipraga@analog.com>
Link: https://patch.msgid.link/20260726-realtek_mutext-v2-2-5d62ba998791@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
With CONFIG_DEBUG_MUTEXES enabled, mutex_destroy() needs to be called
before the lock is discarded. Use devm_mutex_init() instead so the
cleanup is handled automatically.
Fixes: 4af2950c50c86 ("net: dsa: realtek-smi: add rtl8365mb subdriver for RTL8365MB-VC")
Reviewed-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Reviewed-by: Alvin Šipraga <alvin.sipraga@analog.com>
Link: https://patch.msgid.link/20260726-realtek_mutext-v2-1-5d62ba998791@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In addition to SGMII, the RTL8367S SerDes also supports HSGMII, which
carries 2.5 Gbps with the same signaling as SGMII at 2.5x clock rate.
The chip info table already declares HSGMII as a supported interface
mode for external interface 1.
Extend the SerDes PCS to handle HSGMII, which phylink represents as
2500base-x:
- Select the HSGMII SerDes tuning parameters and external interface
mode, and mux the SerDes to MAC8 in HSGMII mode, from pcs_config()
according to the interface. The parameters are again lifted from the
GPL-licensed Realtek rtl8367c vendor driver, and again only cover
the tuning variant for a non-zero chip option, so the mode is gated
on the option probed at setup.
- Advertise 2500base-x and MAC_2500FD on ports whose external
interface supports HSGMII.
- Accept SPEED_2500 in the forced link configuration. The MAC speed
field has no 2.5 Gbps value: the rate is determined by the HSGMII
SerDes configuration, and the vendor driver programs the 1 Gbps
value here, so do the same.
- Raise the port 6 ingress and egress rate limiters to their maximum
at setup time, as the vendor switch init does unconditionally for
the whole chip family. The chip resets them to 0x1FFFF (~1.048 Gbps
in units of 8 Kbps), which caps the aggregate HSGMII throughput at
roughly 1 Gbps. The vendor documentation describes the reset
default as disabling the limiter, but the cap is real: on an
RTL8367S-based Mercusys MR85X running an OpenWrt backport of this
series, several clients on 1 Gbps user ports were limited to about
1.02 Gbps combined across the HSGMII CPU port until these limiters
were raised, after which throughput reached about 2 Gbps [1]. The
related HSGMII scheduler line rate (LINE_RATE_HSG_H) is already set
to its maximum by the common init jam table.
Tested on a Mercusys MR80X v2.20, where the RTL8367S is connected to
the SoC over HSGMII.
Link: https://github.com/openwrt/openwrt/pull/19445#issuecomment-4505613294 [1]
Suggested-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Suggested-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
Signed-off-by: Johan Alvarado <contact@c127.dev>
Tested-by: Stanisław Pal <kuncy7@gmail.com>
Reviewed-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Reviewed-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
Tested-by: Stanislaw Pal <kuncy7@gmail.com>
Link: https://patch.msgid.link/20260711-rtl8367s-sgmii-v6-2-88f7944ddca7@c127.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The RTL8367S can mux its embedded SerDes to external interface 1,
which is typically used to connect the switch to a CPU port. The chip
info table already declares SGMII as a supported interface mode for
this chip, but the driver only implements RGMII so far.
Implement SGMII support as a phylink PCS, with the configuration
sequence derived from the GPL-licensed Realtek rtl8367c vendor driver
as distributed in the Mercusys MR80X GPL code drop:
- Add accessors for the SerDes indirect access registers (SDS_INDACS),
through which the SerDes internal registers are reached.
- Register a phylink_pcs for the SerDes, selected from mac_select_pcs
for the SGMII interface, so the SerDes handling lives in the PCS
operations rather than in the MAC operations.
- Probe the SerDes tuning variant from the chip option register once
at setup. The vendor driver keeps two sets of SerDes tuning
parameters and selects between them based on this option; only the
variant for a non-zero option (which all RTL8367S parts seen so far
report) has been validated on hardware, so the SerDes interface
modes are only advertised in that case. An unsupported variant thus
fails at phylink validation time instead of at link configuration
time.
- Keep the embedded DW8051 microcontroller in reset and disabled. The
vendor driver loads firmware into it to manage the SerDes link, but
analysis of that firmware shows it only duplicates the link
management phylink already performs: it polls the port status and
writes the external interface force registers behind the driver's
back.
- Clear the line rate bypass bit for the external interface, tune the
SerDes with the vendor-prescribed parameters, mux the SerDes to MAC8
in SGMII mode and only then take the SerDes out of reset, as the
vendor driver does.
- After deasserting the SerDes reset, reset the SerDes data path via
the SerDes BMCR register to flush the FIFOs and resync the PLL.
This mirrors what the vendor firmware does right after deasserting
the SerDes reset, and ensures a clean link state from cold boot.
- Force the SGMII link parameters (link, speed, duplex) in the SDS_MISC
register from pcs_link_up(). SGMII in-band autonegotiation is not
implemented, so only fixed-link and conventional PHY setups are
supported, just like RGMII. This is reported to phylink through
pcs_inband_caps() returning LINK_INBAND_DISABLE, so phylink never
selects an in-band-enabled negotiation mode for this PCS.
- Program the SerDes pause enables in SDS_MISC from the resolved
pause modes when forcing the MAC external interface in mac_link_up,
as the vendor driver does, rather than leaving whatever state the
boot firmware left there. Flow control testing shows these bits,
not the MAC force pause bits, gate pause on the SerDes external
interface. This is done in the MAC layer because pcs_link_up()
carries no pause information.
- Implement pcs_get_state() by reading the link status from the
SerDes, with the forced speed and duplex read back from SDS_MISC.
Although the supported fixed-link and conventional PHY setups do not
use it, the PCS owns the SerDes link state, and phylink consults
pcs_get_state() to track the physical link when operating in in-band
mode with autonegotiation disabled. The SerDes has no link interrupt
wired up, so the PCS sets its poll flag.
Tested on a Mercusys MR80X v2.20, where the RTL8367S is connected to
the SoC over SGMII.
Suggested-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Suggested-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Suggested-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
Signed-off-by: Johan Alvarado <contact@c127.dev>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Reviewed-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
Tested-by: Stanislaw Pal <kuncy7@gmail.com>
Link: https://patch.msgid.link/20260711-rtl8367s-sgmii-v6-1-88f7944ddca7@c127.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Instead of just writing the learning disablement register in setup
and a custom handling of BR_LEARNING, implement the generic RTL83xx
.port_set_learning() callback for setting learning on a port, and
call this in the per-port loop in .setup().
Instead of the custom rtl83366rb_port_bridge_flags() function for
setting learning mode on each port, use the RTL83xx generic
rtl83xx_port_bridge_flags() callback.
Signed-off-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20260630-rtl8366rb-improvements-v2-5-05eb9d6a37f5@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
When we loop over all ports in the switch .setup() callback,
make sure to disable learning on all user ports. This is what
is normally expected and what the RTL8365MB is doing.
Move the code around to accommodate for the new call.
Reviewed-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20260630-rtl8366rb-improvements-v2-4-05eb9d6a37f5@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Instead of custom loops for intializing the ports (including the
CPU port) use the DSA helpers dsa_switch_for_each_port() and
dsa_switch_for_each_cpu_port() following the pattern in RTL8365MB by
accumulatong masks for the upstream and downstream ports.
This gives us similar enough code to the RTL8365MB that we
can start using more generic rtl83xx helpers.
Reviewed-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20260630-rtl8366rb-improvements-v2-3-05eb9d6a37f5@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The RTL8366RB is using its own sub-standard port isolation code.
Implement the required isolation helpers, use these directly in
the port setup callback, and switch over to the standard port
isolation code.
Signed-off-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20260630-rtl8366rb-improvements-v2-2-05eb9d6a37f5@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Mostly to make it possible to add rtl83xx support piece by piece,
make the port learning callback optional in rtl83xx_port_bridge_join()
and rtl83xx_port_bridge_leave().
Signed-off-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20260630-rtl8366rb-improvements-v2-1-05eb9d6a37f5@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
led_classdev_register_ext() only reads init_data.devicename - it never
stores the pointer. However, the caller allocated devicename with
kasprintf() but never freed it, leaking the string memory.
Fix it with a stack buffer to avoid dynamic buffers completely.
Fixes: 32d617005475 ("net: dsa: realtek: add LED drivers for rtl8366rb")
Signed-off-by: David Yang <mmyangfl@gmail.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20260618140200.1888707-1-mmyangfl@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Implement support for bridge port flags to control learning and flooding
behavior. This patch maps hardware functionalities to the following
bridge flags:
- BR_LEARNING
- BR_FLOOD
- BR_MCAST_FLOOD
- BR_BCAST_FLOOD
By default, all flooding types are enabled during port setup to ensure
standard bridge behavior.
Reviewed-by: Linus Walleij <linusw@kernel.org>
Reviewed-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Link: https://patch.msgid.link/20260606-realtek_forward-v13-9-b9e409687cbe@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Implement hardware offloading of bridge functionality. This is achieved
by using the per-port isolation registers, which contain a forwarding
port mask. The switch will refuse to forward packets ingressed on a
given port to a port which is not in its forwarding mask.
For each bridge that is offloaded, use the DSA-provided bridge number
for the Extended Filtering ID (EFID). When using Independent VLAN
Learning (IVL), the forwarding database is keyed with the tuple
{VID, MAC, EFID}. There are 8 EFIDs available (0~7), but we reserve the
default EFID 0 for standalone ports where learning is disabled. This
fits nicely because DSA indexes the bridge number starting from 1.
Because of the limited number of EFIDs, we have to set the
max_num_bridges property of our switch to 7: we can't offload more than
that or we will fail to offer IVL as at least two bridges would end up
having to share an EFID.
All ports start isolated, forwarding exclusively to CPU ports, and
with VLAN transparent, ignoring VLAN membership. Once a member in a
bridge, the port isolation is expanded to include the bridge members.
When that bridge enables VLAN filtering, the VLAN transparent feature is
disabled, letting the switch filter based on VLAN setup.
Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Reviewed-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
Co-developed-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Link: https://patch.msgid.link/20260606-realtek_forward-v13-8-b9e409687cbe@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Implement support for FDB and MDB management for the RTL8365MB series
switches.
The hardware supports IVL by keying the unicast forwarding database with
the {MAC, VID, EFID} tuple. The Extended Filtering ID (EFID) is 3 bits
wide, providing 8 unique filtering domains. This driver reserves EFID 0
for standalone ports, effectively limiting the hardware offload to a
maximum of 7 bridges. The multicast database uses a {MAC, VID} key, with
ports from different bridges sharing the same multicast group.
Introduce a mutex lock (l2_lock) to protect concurrent L2 table updates.
Add support for forwarding database operations, including unicast and
multicast entry handling as well as fast aging support.
Set DSA switch flags assisted_learning_on_cpu_port and fdb_isolation.
Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Reviewed-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
Co-developed-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Link: https://patch.msgid.link/20260606-realtek_forward-v13-7-b9e409687cbe@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Realtek RTL8365MB switches (a.k.a. RTL8367C family) use two different
structures for VLANs:
- VLAN4K: A full table with 4096 entries defining port membership and
tagging.
- VLANMC: A smaller table with 32 entries used primarily for PVID
assignment.
In this hardware, a port's PVID must point to an index in the VLANMC
table rather than a VID directly. Since the VLANMC table is limited to
32 entries, the driver implements a dynamic allocation scheme to
maximize resource usage:
- VLAN4K is treated by the driver as the source of truth for membership.
- A VLANMC entry is only allocated when a port is configured to use a
specific VID as its PVID.
- VLANMC entries are deleted when no longer needed as a PVID by any port.
Although VLANMC has a members field, the switch only checks membership
in the VLAN4K table. This driver will use VLANMC members field as way to
track which ports are using that entry as PVID.
VLANMC index 0, although a valid entry, is reserved in this driver as a
neutral PVID value for ports not using a specific PVID.
In the subsequent RTL8367D switch family, VLANMC table was
removed and PVID assignment was delegated to a dedicated set of
registers.
The use of FIELD_PREP for reconstructing LO/HI values was suggested by
Yury Norov.
Fix for vlan_setup and vlan_filtering was suggested by Abdulkader
Alrezej.
Suggested-by: Yury Norov <ynorov@nvidia.com>
Suggested-by: Abdulkader Alrezej <abdulkader.alrezej@gmail.com>
Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Reviewed-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
Co-developed-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Link: https://patch.msgid.link/20260606-realtek_forward-v13-6-b9e409687cbe@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a generic table lookup interface to centralize access to
the RTL8365MB internal tables.
This interface abstracts the low-level table access logic and
will be used by subsequent commits to implement FDB and VLAN
operations.
Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Reviewed-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
Co-developed-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Link: https://patch.msgid.link/20260606-realtek_forward-v13-5-b9e409687cbe@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Rename rtl8365mb.c to rtl8365mb_main.c in preparation for subsequent
commits which add additional source files to the driver.
The trailing backslash in the Makefile is deliberate. It allows for new
files to be added without clobbering git history.
Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Reviewed-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
Co-developed-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Link: https://patch.msgid.link/20260606-realtek_forward-v13-4-b9e409687cbe@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Convert open-coded port iteration loops to use the DSA helpers and
restructure rtl8365mb_setup() into clear blocking, user, and
CPU port phases.
As part of this refactoring, unused ports are explicitly placed into a
blocked, isolated state with learning disabled, ensuring safe default
hardware behavior. The driver also does not allocate a virtual IRQ
mapping for unused ports. To accommodate this, a guard check is added to
the interrupt handler (rtl8365mb_irq) to safely skip ports without a
valid IRQ mapping. The irq domain teardown, however, does clean all
ports as external PHYs may still map the IRQ.
Furthermore, since the new initialization loop starts with all ports
administratively isolated by default, CPU port forwarding and isolation
masks are explicitly configured at the end of the setup phase to prevent
egress traffic from being blocked.
Suggested-by: Abdulkader Alrezej <abdulkader.alrezej@gmail.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Reviewed-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Link: https://patch.msgid.link/20260606-realtek_forward-v13-3-b9e409687cbe@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Explicitly enforce the presence of a CPU port (-EINVAL) and reject DSA
cascade links (-EOPNOTSUPP) during setup to prevent silent failures.
These topologies were already non-functional. Without a CPU port, the
driver does not activate CPU tagging. Additionally, the switch hardware
was not designed to be cascaded, and DSA links never worked because
CPU tagging is not enabled for them.
Reviewed-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Link: https://patch.msgid.link/20260606-realtek_forward-v13-2-b9e409687cbe@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Convert numeric error codes into human-readable strings by using %pe
together with ERR_PTR() in dev_err() messages. Also use dev_err_probe()
instead of checking for -EPROBE_DEFER.
Reviewed-by: Linus Walleij <linusw@kernel.org>
Reviewed-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Link: https://patch.msgid.link/20260606-realtek_forward-v13-1-b9e409687cbe@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Convert to %pM instead of using custom code.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Nicolai Buchwitz <nb@tipi-net.de>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20260603112011.230890-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add chip info entry for the Realtek RTL8367SB switch. This device has
chip ID 0x6367 and version 0x0010. It exposes two external interfaces:
port 6 supports MII, TMII, RMII, RGMII, SGMII and HSGMII, while port 7
supports MII, TMII, RMII and RGMII. Use the existing 8365MB-VC jam table
for initialization.
Reviewed-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
Link: https://patch.msgid.link/3c6d822b-0e85-4173-86ba-2badb140bbf1@yahoo.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The RTL8365MB_DIGITAL_INTERFACE_SELECT_MODE_MASK macro was shifting
the 4-bit mask (0xF) by only (_extint % 2) bits instead of
(_extint % 2) * 4. This caused the mask to overlap with the adjacent
nibble when configuring odd-numbered external interfaces, selecting
the wrong bits entirely.
Align the shift calculation with the existing ...MODE_OFFSET macro.
Fixes: 4af2950c50c8 ("net: dsa: realtek-smi: add rtl8365mb subdriver for RTL8365MB-VC")
Signed-off-by: Abdulkader Alrezej <alrazj.abdulkader@gmail.com>
Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
Reviewed-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Link: https://patch.msgid.link/400a6387-a444-4576-af6d-26be5410bce3@yahoo.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The rtl8366rb_led_group_port_mask() function always returns LED port
bit in LED group 0; the switch statement returns the same thing in all
non-default cases.
This means that the driver does not currently support configuring LEDs
in non-zero LED groups.
Fix this.
Fixes: 32d617005475a71e ("net: dsa: realtek: add LED drivers for rtl8366rb")
Signed-off-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20260311111237.29002-1-kabel@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
rx_packets should report the number of frames successfully received:
unicast + multicast + broadcast. Subtracting ifOutDiscards (a TX
counter) is incorrect and can undercount RX packets. RX drops are
already reported via rx_dropped (e.g. etherStatsDropEvents), so
there is no need to adjust rx_packets.
This patch removes the subtraction of ifOutDiscards from rx_packets
in rtl8365mb_stats_update().
Link: https://lore.kernel.org/netdev/878777925.105015.1763423928520@mail.yahoo.com/
Fixes: 4af2950c50c8 ("net: dsa: realtek-smi: add rtl8365mb subdriver for RTL8365MB-VC")
Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Acked-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20260303-realtek_namiltd_fix2-v1-1-bfa433d3401e@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Function rtl8365mb_phy_ocp_write() always returns 0, even when an error
occurs during register access. This patch fixes the return value to
propagate the actual error code from regmap operations.
Link: https://lore.kernel.org/netdev/a2dfde3c-d46f-434b-9d16-1e251e449068@yahoo.com/
Fixes: 2796728460b8 ("net: dsa: realtek: rtl8365mb: serialize indirect PHY register access")
Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20260301-realtek_namiltd_fix1-v1-1-43a6bb707f9c@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
All known Realtek protocols: "rtl4a", "rtl8_4" and "rtl8_4t" use
dsa_xmit_port_mask(), so they are compatible with accelerating TX packet
duplication for HSR rings.
Enable that feature by setting the port_hsr_join() and port_hsr_leave()
operations to the simple helpers provided by DSA.
Cc: "Alvin Šipraga" <alsi@bang-olufsen.dk>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20251130131657.65080-9-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
These are present since commit d8652956cf37 ("net: dsa: realtek-smi: Add
Realtek SMI driver") and never needed. Apparently the driver was not
cleaned up sufficiently for submission.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patch.msgid.link/20250813181023.808528-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
irq_domain_add_*() interfaces are going away as being obsolete now.
Switch to the preferred irq_domain_create_*() ones. Those differ in the
node parameter: They take more generic struct fwnode_handle instead of
struct device_node. Therefore, of_fwnode_handle() is added around the
original parameter.
Note some of the users can likely use dev->fwnode directly instead of
indirect of_fwnode_handle(dev->of_node). But dev->fwnode is not
guaranteed to be set for all, so this has to be investigated on case to
case basis (by people who can actually test with the HW).
[ tglx: Fix up subject prefix ]
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250319092951.37667-28-jirislaby@kernel.org
|
|
Make NET_DSA_REALTEK_RTL8366RB_LEDS a hidden symbol.
It seems very unlikely user would want to intentionally
disable it.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20250228004534.3428681-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
When the kernel is compiled without LED framework support the
rtl8366rb fails to build like this:
rtl8366rb.o: in function `rtl8366rb_setup_led':
rtl8366rb.c:953:(.text.unlikely.rtl8366rb_setup_led+0xe8):
undefined reference to `led_init_default_state_get'
rtl8366rb.c:980:(.text.unlikely.rtl8366rb_setup_led+0x240):
undefined reference to `devm_led_classdev_register_ext'
As this is constantly coming up in different randconfig builds,
bite the bullet and create a separate file for the offending
code, split out a header with all stuff needed both in the
core driver and the leds code.
Add a new bool Kconfig option for the LED compile target, such
that it depends on LEDS_CLASS=y || LEDS_CLASS=RTL8366RB
which make LED support always available when LEDS_CLASS is
compiled into the kernel and enforce that if the LEDS_CLASS
is a module, then the RTL8366RB driver needs to be a module
as well so that modprobe can resolve the dependencies.
Fixes: 32d617005475 ("net: dsa: realtek: add LED drivers for rtl8366rb")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202502070525.xMUImayb-lkp@intel.com/
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Replace ternary (condition ? "enable" : "disable") syntax with helpers
from string_choices.h because:
1. Simple function call with one argument is easier to read. Ternary
operator has three arguments and with wrapping might lead to quite
long code.
2. Is slightly shorter thus also easier to read.
3. It brings uniformity in the text - same string.
4. Allows deduping by the linker, which results in a smaller binary
file.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Clean up the existing export namespace code along the same lines of
commit 33def8498fdd ("treewide: Convert macro and uses of __section(foo)
to __section("foo")") and for the same reason, it is not desired for the
namespace argument to be a macro expansion itself.
Scripted using
git grep -l -e MODULE_IMPORT_NS -e EXPORT_SYMBOL_NS | while read file;
do
awk -i inplace '
/^#define EXPORT_SYMBOL_NS/ {
gsub(/__stringify\(ns\)/, "ns");
print;
next;
}
/^#define MODULE_IMPORT_NS/ {
gsub(/__stringify\(ns\)/, "ns");
print;
next;
}
/MODULE_IMPORT_NS/ {
$0 = gensub(/MODULE_IMPORT_NS\(([^)]*)\)/, "MODULE_IMPORT_NS(\"\\1\")", "g");
}
/EXPORT_SYMBOL_NS/ {
if ($0 ~ /(EXPORT_SYMBOL_NS[^(]*)\(([^,]+),/) {
if ($0 !~ /(EXPORT_SYMBOL_NS[^(]*)\(([^,]+), ([^)]+)\)/ &&
$0 !~ /(EXPORT_SYMBOL_NS[^(]*)\(\)/ &&
$0 !~ /^my/) {
getline line;
gsub(/[[:space:]]*\\$/, "");
gsub(/[[:space:]]/, "", line);
$0 = $0 " " line;
}
$0 = gensub(/(EXPORT_SYMBOL_NS[^(]*)\(([^,]+), ([^)]+)\)/,
"\\1(\\2, \"\\3\")", "g");
}
}
{ print }' $file;
done
Requested-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://mail.google.com/mail/u/2/#inbox/FMfcgzQXKWgMmjdFwwdsfgxzKpVHWPlc
Acked-by: Greg KH <gregkh@linuxfoundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
After commit 0edb555a65d1 ("platform: Make platform_driver::remove()
return void") .remove() is (again) the right callback to implement for
platform drivers.
Convert all platform drivers below drivers/net/dsa to use .remove(),
with the eventual goal to drop struct platform_driver::remove_new(). As
.remove() and .remove_new() have the same prototypes, conversion is done
by just changing the structure member name in the driver initializer.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/36da477cb9fa0bffec32d50c2cf3d18e94a0e7e3.1727949050.git.u.kleine-koenig@baylibre.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Convert irqd_get_trigger_type(irq_get_irq_data(irq)) cases to the more
simple irq_get_trigger_type(irq).
Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Signed-off-by: Vasileios Amoiridis <vassilisamir@gmail.com>
Link: https://patch.msgid.link/20240904151018.71967-3-vassilisamir@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Convert irqd_get_trigger_type(irq_get_irq_data(irq)) cases to the more
simple irq_get_trigger_type(irq).
Signed-off-by: Vasileios Amoiridis <vassilisamir@gmail.com>
Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Link: https://patch.msgid.link/20240904151018.71967-2-vassilisamir@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
