summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/amd/xgbe
AgeCommit message (Collapse)Author
2026-03-10amd-xgbe: reset PHY settings before starting PHYRaju Rangoju
commit f93505f35745 ("amd-xgbe: let the MAC manage PHY PM") moved xgbe_phy_reset() from xgbe_open() to xgbe_start(), placing it after phy_start(). As a result, the PHY settings were being reset after the PHY had already started. Reorder the calls so that the PHY settings are reset before phy_start() is invoked. Fixes: f93505f35745 ("amd-xgbe: let the MAC manage PHY PM") Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com> Link: https://patch.msgid.link/20260306111629.1515676-4-Raju.Rangoju@amd.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2026-03-10amd-xgbe: prevent CRC errors during RX adaptation with AN disabledRaju Rangoju
When operating in 10GBASE-KR mode with auto-negotiation disabled and RX adaptation enabled, CRC errors can occur during the RX adaptation process. This happens because the driver continues transmitting and receiving packets while adaptation is in progress. Fix this by stopping TX/RX immediately when the link goes down and RX adaptation needs to be re-triggered, and only re-enabling TX/RX after adaptation completes and the link is confirmed up. Introduce a flag to track whether TX/RX was disabled for adaptation so it can be restored correctly. This prevents packets from being transmitted or received during the RX adaptation window and avoids CRC errors from corrupted frames. The flag tracking the data path state is synchronized with hardware state in xgbe_start() to prevent stale state after device restarts. This ensures that after a restart cycle (where xgbe_stop disables TX/RX and xgbe_start re-enables them), the flag correctly reflects that the data path is active. Fixes: 4f3b20bfbb75 ("amd-xgbe: add support for rx-adaptation") Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com> Link: https://patch.msgid.link/20260306111629.1515676-3-Raju.Rangoju@amd.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2026-03-10amd-xgbe: fix link status handling in xgbe_rx_adaptationRaju Rangoju
The link status bit is latched low to allow detection of momentary link drops. If the status indicates that the link is already down, read it again to obtain the current state. Fixes: 4f3b20bfbb75 ("amd-xgbe: add support for rx-adaptation") Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com> Link: https://patch.msgid.link/20260306111629.1515676-2-Raju.Rangoju@amd.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2026-03-03amd-xgbe: fix sleep while atomic on suspend/resumeRaju Rangoju
The xgbe_powerdown() and xgbe_powerup() functions use spinlocks (spin_lock_irqsave) while calling functions that may sleep: - napi_disable() can sleep waiting for NAPI polling to complete - flush_workqueue() can sleep waiting for pending work items This causes a "BUG: scheduling while atomic" error during suspend/resume cycles on systems using the AMD XGBE Ethernet controller. The spinlock protection in these functions is unnecessary as these functions are called from suspend/resume paths which are already serialized by the PM core Fix this by removing the spinlock. Since only code that takes this lock is xgbe_powerdown() and xgbe_powerup(), remove it completely. Fixes: c5aa9e3b8156 ("amd-xgbe: Initial AMD 10GbE platform driver") Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com> Link: https://patch.msgid.link/20260302042124.1386445-1-Raju.Rangoju@amd.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-02-28amd-xgbe: fix MAC_TCR_SS register width for 2.5G and 10M speedsRaju Rangoju
Extend the MAC_TCR_SS (Speed Select) register field width from 2 bits to 3 bits to properly support all speed settings. The MAC_TCR register's SS field encoding requires 3 bits to represent all supported speeds: - 0x00: 10Gbps (XGMII) - 0x02: 2.5Gbps (GMII) / 100Mbps - 0x03: 1Gbps / 10Mbps - 0x06: 2.5Gbps (XGMII) - P100a only With only 2 bits, values 0x04-0x07 cannot be represented, which breaks 2.5G XGMII mode on newer platforms and causes incorrect speed select values to be programmed. Fixes: 07445f3c7ca1 ("amd-xgbe: Add support for 10 Mbps speed") Co-developed-by: Guruvendra Punugupati <Guruvendra.Punugupati@amd.com> Signed-off-by: Guruvendra Punugupati <Guruvendra.Punugupati@amd.com> Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com> Link: https://patch.msgid.link/20260226170753.250312-1-Raju.Rangoju@amd.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-02-21Convert 'alloc_obj' family to use the new default GFP_KERNEL argumentLinus Torvalds
This was done entirely with mindless brute force, using git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' | xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/' to convert the new alloc_obj() users that had a simple GFP_KERNEL argument to just drop that argument. Note that due to the extreme simplicity of the scripting, any slightly more complex cases spread over multiple lines would not be triggered: they definitely exist, but this covers the vast bulk of the cases, and the resulting diff is also then easier to check automatically. For the same reason the 'flex' versions will be done as a separate conversion. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2026-02-21treewide: Replace kmalloc with kmalloc_obj for non-scalar typesKees Cook
This is the result of running the Coccinelle script from scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to avoid scalar types (which need careful case-by-case checking), and instead replace kmalloc-family calls that allocate struct or union object instances: Single allocations: kmalloc(sizeof(TYPE), ...) are replaced with: kmalloc_obj(TYPE, ...) Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...) are replaced with: kmalloc_objs(TYPE, COUNT, ...) Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...) are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...) (where TYPE may also be *VAR) The resulting allocations no longer return "void *", instead returning "TYPE *". Signed-off-by: Kees Cook <kees@kernel.org>
2026-01-30amd-xgbe: add support for rx alignment errorsRaju Rangoju
Add the support to read the rx alignment errors and update them in the standard rtnl_link_stats64 structure. Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20260129111520.1567097-1-Raju.Rangoju@amd.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-01-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR (net-6.19-rc7). Conflicts: drivers/net/ethernet/huawei/hinic3/hinic3_irq.c b35a6fd37a00 ("hinic3: Add adaptive IRQ coalescing with DIM") fb2bb2a1ebf7 ("hinic3: Fix netif_queue_set_napi queue_index input parameter error") https://lore.kernel.org/fc0a7fdf08789a52653e8ad05281a0a849e79206.1768915707.git.zhuyikai1@h-partners.com drivers/net/wireless/ath/ath12k/mac.c drivers/net/wireless/ath/ath12k/wifi7/hw.c 31707572108d ("wifi: ath12k: Fix wrong P2P device link id issue") c26f294fef2a ("wifi: ath12k: Move ieee80211_ops callback to the arch specific module") https://lore.kernel.org/20260114123751.6a208818@canb.auug.org.au Adjacent changes: drivers/net/wireless/ath/ath12k/mac.c 8b8d6ee53dfd ("wifi: ath12k: Fix scan state stuck in ABORTING after cancel_remain_on_channel") 914c890d3b90 ("wifi: ath12k: Add framework for hardware specific ieee80211_ops registration") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-01-17net: xgbe: convert to use .get_rx_ring_countBreno Leitao
Use the newly introduced .get_rx_ring_count ethtool ops callback instead of handling ETHTOOL_GRXRINGS directly in .get_rxnfc(). Since ETHTOOL_GRXRINGS was the only command handled by xgbe_get_rxnfc(), remove the function entirely. Signed-off-by: Breno Leitao <leitao@debian.org> Link: https://patch.msgid.link/20260115-grxring_big_v2-v1-6-b3e1b58bced5@debian.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-01-17amd-xgbe: avoid misleading per-packet error logRaju Rangoju
On the receive path, packet can be damaged because of buffer overflow in Rx FIFO. Avoid misleading per-packet error log when packet->errors is set, this can flood the log. Instead, rely on the standard rtnl_link_stats64 stats. Fixes: c5aa9e3b8156 ("amd-xgbe: Initial AMD 10GbE platform driver") Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com> Link: https://patch.msgid.link/20260114163037.2062606-1-Raju.Rangoju@amd.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-01-15xgbe: Use netlink extack to report errors to ethtoolVishal Badole
Upgrade XGBE driver to report errors via netlink extack instead of netdev_error so ethtool userspace can be aware of failures. Signed-off-by: Vishal Badole <Vishal.Badole@amd.com> Reviewed-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev> Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com> Link: https://patch.msgid.link/20260114080357.1778132-1-Raju.Rangoju@amd.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-12-23amd-xgbe: reset retries and mode on RX adapt failuresRaju Rangoju
During the stress tests, early RX adaptation handshakes can fail, such as missing the RX_ADAPT ACK or not receiving a coefficient update before block lock is established. Continuing to retry RX adaptation in this state is often ineffective if the current mode selection is not viable. Resetting the RX adaptation retry counter when an RX_ADAPT request fails to receive ACK or a coefficient update prior to block lock, and clearing mode_set so the next bring-up performs a fresh mode selection rather than looping on a likely invalid configuration. Fixes: 4f3b20bfbb75 ("amd-xgbe: add support for rx-adaptation") Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Link: https://patch.msgid.link/20251215151728.311713-1-Raju.Rangoju@amd.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-12-01amd-xgbe: schedule NAPI on Rx Buffer Unavailable (RBU)Raju Rangoju
Under heavy load, Rx Buffer Unavailable (RBU) can occur if Rx processing is slower than network. When an RBU is signaled, try to schedule NAPI to help recover from such situation (including cases where an IRQ may be missed or such) Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com> Link: https://patch.msgid.link/20251129175016.3034185-3-Raju.Rangoju@amd.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-12-01amd-xgbe: refactor the dma IRQ handling code pathRaju Rangoju
Refactor the DMA interrupt bottom-half handling to improve the readability, maintainability, without changing the intended behavior. Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com> Link: https://patch.msgid.link/20251129175016.3034185-2-Raju.Rangoju@amd.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-11-26amd-xgbe: let the MAC manage PHY PMRaju Rangoju
Use the MAC managed PM flag to indicate that MAC driver takes care of suspending/resuming the PHY, and reset it when the device is brought up. Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com> Link: https://patch.msgid.link/20251123163721.442162-1-Raju.Rangoju@amd.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-11-06amd-xgbe: add ethtool jumbo frame selftestRaju Rangoju
Adds support for jumbo frame selftest. Works only for mtu size greater than 1500. Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com> Link: https://patch.msgid.link/20251031111555.774425-5-Raju.Rangoju@amd.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-11-06amd-xgbe: add ethtool split header selftestRaju Rangoju
Adds support for ethtool split header selftest. Performs UDP and TCP check to ensure split header selft test works for both packet types. Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com> Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Link: https://patch.msgid.link/20251031111555.774425-4-Raju.Rangoju@amd.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-11-06amd-xgbe: add ethtool phy loopback selftestRaju Rangoju
Add support for PHY loopback testing via ethtool self-test. The test uses phy_loopback() which enables PHY-level loopback through the PHY driver's set_loopback callback if provided, else uses the genphy_loopback(). Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com> Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Link: https://patch.msgid.link/20251031111555.774425-3-Raju.Rangoju@amd.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-11-06amd-xgbe: introduce support ethtool selftestRaju Rangoju
Add support for ethtool selftest for MAC loopback. This includes the sanity check and helps in finding the misconfiguration of HW. Uses the existing selftest infrastructure to create test packets. Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com> Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Link: https://patch.msgid.link/20251031111555.774425-2-Raju.Rangoju@amd.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-10-20amd-xgbe: convert to ndo_hwtstamp callbacksVadim Fedorenko
Convert driver to use .ndo_hwtstamp_get()/.ndo_hwtstamp_set() callbacks. .ndo_eth_ioctl() becomes empty function, remove it. Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Vadim Fedorenko <vadim.fedorenko@linux.dev> Link: https://patch.msgid.link/20251016152515.3510991-4-vadim.fedorenko@linux.dev Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-10-16net: amd-xgbe: use EOPNOTSUPP instead of ENOTSUPP in xgbe_phy_mii_read_c45Alok Tiwari
The MDIO read callback xgbe_phy_mii_read_c45() can propagate its return value up through phylink_mii_ioctl() to user space via netdev ioctls such as SIOCGMIIREG. Returning ENOTSUPP results in user space seeing "Unknown error", since ENOTSUPP is not a standard errno value. Replace ENOTSUPP with EOPNOTSUPP to align with the MDIO core’s usage and ensure user space receives a proper "Operation not supported" error instead of an unknown code. Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com> Reviewed-by: Simon Horman <horms@kernel.org> Acked-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Link: https://patch.msgid.link/20251015025751.1532149-1-alok.a.tiwari@oracle.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-10-14amd-xgbe: Avoid spurious link down messages during interface toggleRaju Rangoju
During interface toggle operations (ifdown/ifup), the driver currently resets the local helper variable 'phy_link' to -1. This causes the link state machine to incorrectly interpret the state as a link change event, resulting in spurious "Link is down" messages being logged when the interface is brought back up. Preserve the phy_link state across interface toggles to avoid treating the -1 sentinel value as a legitimate link state transition. Fixes: 88131a812b16 ("amd-xgbe: Perform phy connect/disconnect at dev open/stop") Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com> Reviewed-by: Dawid Osuchowski <dawid.osuchowski@linux.intel.com> Link: https://patch.msgid.link/20251010065142.1189310-1-Raju.Rangoju@amd.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-09-14amd-xgbe: Add PPS periodic output supportRaju Rangoju
Add support for hardware PPS (Pulse Per Second) output to the AMD XGBE driver. The implementation enables flexible periodic output mode, exposing it via the PTP per_out interface. The driver supports configuring PPS output using the standard PTP subsystem, allowing precise periodic signal generation for time synchronization applications. The feature has been verified using the testptp tool and oscilloscope. Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com> Link: https://patch.msgid.link/20250909113143.1364477-1-Raju.Rangoju@amd.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-08-27amd-xgbe: Use int type to store negative error codesQianfeng Rong
Use int instead of unsigned int for the 'ret' variable to store return values from functions that either return zero on success or negative error codes on failure. Storing negative error codes in an unsigned int causes no runtime issues, but it's ugly as pants, Change 'ret' from unsigned int to int type - this change has no runtime impact. Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20250826142159.525059-1-rongqianfeng@vivo.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-08-18amd-xgbe: Configure and retrieve 'tx-usecs' for Tx coalescingVishal Badole
Ethtool has advanced with additional configurable options, but the current driver does not support tx-usecs configuration using Ethtool. Add support to configure and retrieve 'tx-usecs' using ethtool, which specifies the wait time before servicing an interrupt for Tx coalescing. Signed-off-by: Vishal Badole <Vishal.Badole@amd.com> Acked-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Link: https://patch.msgid.link/20250816141941.126054-1-Vishal.Badole@amd.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-21amd-xgbe: add hardware PTP timestamping supportRaju Rangoju
Adds complete support for hardware-based PTP (IEEE 1588) timestamping to the AMD XGBE driver. - Initialize and configure the MAC PTP registers based on link speed and reference clock. - Support both 50MHz and 125MHz PTP reference clocks. - Update the driver interface and version data to support PTP clock frequency selection. Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com> Link: https://patch.msgid.link/20250718185628.4038779-3-Raju.Rangoju@amd.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-21and-xgbe: remove the abstraction for hwptpRaju Rangoju
Remove the hwptp abstraction and associated callbacks from the struct xgbe_hw_if {}. The callback structure was only ever assigned a single function, without null checks. This cleanup inlines the logic and moves all the hwtstamp realted code a separate file, improving readability and maintainance. Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com> Link: https://patch.msgid.link/20250718185628.4038779-2-Raju.Rangoju@amd.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netPaolo Abeni
Cross-merge networking fixes after downstream PR (net-6.16-rc5). No conflicts. No adjacent changes. Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-07-02amd-xgbe: add support for giant packet sizeRaju Rangoju
AMD XGBE hardware supports giant Ethernet frames up to 16K bytes. Add support for configuring and enabling giant packet handling in the driver. - Define new register fields and macros for giant packet support. - Update the jumbo frame configuration logic to enable giant packet mode when MTU exceeds the jumbo threshold. Acked-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250701121929.319690-1-Raju.Rangoju@amd.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-02amd-xgbe: do not double read link statusRaju Rangoju
The link status is latched low so that momentary link drops can be detected. Always double-reading the status defeats this design feature. Only double read if link was already down This prevents unnecessary duplicate readings of the link status. Fixes: 4f3b20bfbb75 ("amd-xgbe: add support for rx-adaptation") Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250701065016.4140707-1-Raju.Rangoju@amd.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-01amd-xgbe: align CL37 AN sequence as per databookRaju Rangoju
Update the Clause 37 Auto-Negotiation implementation to properly align with the PCS hardware specifications: - Fix incorrect bit settings in Link Status and Link Duplex fields - Implement missing sequence steps 2 and 7 These changes ensure CL37 auto-negotiation protocol follows the exact sequence patterns as specified in the hardware databook. Fixes: 1bf40ada6290 ("amd-xgbe: Add support for clause 37 auto-negotiation") Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com> Link: https://patch.msgid.link/20250630192636.3838291-1-Raju.Rangoju@amd.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-08treewide, timers: Rename from_timer() to timer_container_of()Ingo Molnar
Move this API to the canonical timer_*() namespace. [ tglx: Redone against pre rc1 ] Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/all/aB2X0jCKQO56WdMt@gmail.com
2025-05-28Merge tag 'net-next-6.16' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Paolo Abeni: "Core: - Implement the Device Memory TCP transmit path, allowing zero-copy data transmission on top of TCP from e.g. GPU memory to the wire. - Move all the IPv6 routing tables management outside the RTNL scope, under its own lock and RCU. The route control path is now 3x times faster. - Convert queue related netlink ops to instance lock, reducing again the scope of the RTNL lock. This improves the control plane scalability. - Refactor the software crc32c implementation, removing unneeded abstraction layers and improving significantly the related micro-benchmarks. - Optimize the GRO engine for UDP-tunneled traffic, for a 10% performance improvement in related stream tests. - Cover more per-CPU storage with local nested BH locking; this is a prep work to remove the current per-CPU lock in local_bh_disable() on PREMPT_RT. - Introduce and use nlmsg_payload helper, combining buffer bounds verification with accessing payload carried by netlink messages. Netfilter: - Rewrite the procfs conntrack table implementation, improving considerably the dump performance. A lot of user-space tools still use this interface. - Implement support for wildcard netdevice in netdev basechain and flowtables. - Integrate conntrack information into nft trace infrastructure. - Export set count and backend name to userspace, for better introspection. BPF: - BPF qdisc support: BPF-qdisc can be implemented with BPF struct_ops programs and can be controlled in similar way to traditional qdiscs using the "tc qdisc" command. - Refactor the UDP socket iterator, addressing long standing issues WRT duplicate hits or missed sockets. Protocols: - Improve TCP receive buffer auto-tuning and increase the default upper bound for the receive buffer; overall this improves the single flow maximum thoughput on 200Gbs link by over 60%. - Add AFS GSSAPI security class to AF_RXRPC; it provides transport security for connections to the AFS fileserver and VL server. - Improve TCP multipath routing, so that the sources address always matches the nexthop device. - Introduce SO_PASSRIGHTS for AF_UNIX, to allow disabling SCM_RIGHTS, and thus preventing DoS caused by passing around problematic FDs. - Retire DCCP socket. DCCP only receives updates for bugs, and major distros disable it by default. Its removal allows for better organisation of TCP fields to reduce the number of cache lines hit in the fast path. - Extend TCP drop-reason support to cover PAWS checks. Driver API: - Reorganize PTP ioctl flag support to require an explicit opt-in for the drivers, avoiding the problem of drivers not rejecting new unsupported flags. - Converted several device drivers to timestamping APIs. - Introduce per-PHY ethtool dump helpers, improving the support for dump operations targeting PHYs. Tests and tooling: - Add support for classic netlink in user space C codegen, so that ynl-c can now read, create and modify links, routes addresses and qdisc layer configuration. - Add ynl sub-types for binary attributes, allowing ynl-c to output known struct instead of raw binary data, clarifying the classic netlink output. - Extend MPTCP selftests to improve the code-coverage. - Add tests for XDP tail adjustment in AF_XDP. New hardware / drivers: - OpenVPN virtual driver: offload OpenVPN data channels processing to the kernel-space, increasing the data transfer throughput WRT the user-space implementation. - Renesas glue driver for the gigabit ethernet RZ/V2H(P) SoC. - Broadcom asp-v3.0 ethernet driver. - AMD Renoir ethernet device. - ReakTek MT9888 2.5G ethernet PHY driver. - Aeonsemi 10G C45 PHYs driver. Drivers: - Ethernet high-speed NICs: - nVidia/Mellanox (mlx5): - refactor the steering table handling to significantly reduce the amount of memory used - add support for complex matches in H/W flow steering - improve flow streeing error handling - convert to netdev instance locking - Intel (100G, ice, igb, ixgbe, idpf): - ice: add switchdev support for LLDP traffic over VF - ixgbe: add firmware manipulation and regions devlink support - igb: introduce support for frame transmission premption - igb: adds persistent NAPI configuration - idpf: introduce RDMA support - idpf: add initial PTP support - Meta (fbnic): - extend hardware stats coverage - add devlink dev flash support - Broadcom (bnxt): - add support for RX-side device memory TCP - Wangxun (txgbe): - implement support for udp tunnel offload - complete PTP and SRIOV support for AML 25G/10G devices - Ethernet NICs embedded and virtual: - Google (gve): - add device memory TCP TX support - Amazon (ena): - support persistent per-NAPI config - Airoha: - add H/W support for L2 traffic offload - add per flow stats for flow offloading - RealTek (rtl8211): add support for WoL magic packet - Synopsys (stmmac): - dwmac-socfpga 1000BaseX support - add Loongson-2K3000 support - introduce support for hardware-accelerated VLAN stripping - Broadcom (bcmgenet): - expose more H/W stats - Freescale (enetc, dpaa2-eth): - enetc: add MAC filter, VLAN filter RSS and loopback support - dpaa2-eth: convert to H/W timestamping APIs - vxlan: convert FDB table to rhashtable, for better scalabilty - veth: apply qdisc backpressure on full ring to reduce TX drops - Ethernet switches: - Microchip (kzZ88x3): add ETS scheduler support - Ethernet PHYs: - RealTek (rtl8211): - add support for WoL magic packet - add support for PHY LEDs - CAN: - Adds RZ/G3E CANFD support to the rcar_canfd driver. - Preparatory work for CAN-XL support. - Add self-tests framework with support for CAN physical interfaces. - WiFi: - mac80211: - scan improvements with multi-link operation (MLO) - Qualcomm (ath12k): - enable AHB support for IPQ5332 - add monitor interface support to QCN9274 - add multi-link operation support to WCN7850 - add 802.11d scan offload support to WCN7850 - monitor mode for WCN7850, better 6 GHz regulatory - Qualcomm (ath11k): - restore hibernation support - MediaTek (mt76): - WiFi-7 improvements - implement support for mt7990 - Intel (iwlwifi): - enhanced multi-link single-radio (EMLSR) support on 5 GHz links - rework device configuration - RealTek (rtw88): - improve throughput for RTL8814AU - RealTek (rtw89): - add multi-link operation support - STA/P2P concurrency improvements - support different SAR configs by antenna - Bluetooth: - introduce HCI Driver protocol - btintel_pcie: do not generate coredump for diagnostic events - btusb: add HCI Drv commands for configuring altsetting - btusb: add RTL8851BE device 0x0bda:0xb850 - btusb: add new VID/PID 13d3/3584 for MT7922 - btusb: add new VID/PID 13d3/3630 and 13d3/3613 for MT7925 - btnxpuart: implement host-wakeup feature" * tag 'net-next-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1611 commits) selftests/bpf: Fix bpf selftest build warning selftests: netfilter: Fix skip of wildcard interface test net: phy: mscc: Stop clearing the the UDPv4 checksum for L2 frames net: openvswitch: Fix the dead loop of MPLS parse calipso: Don't call calipso functions for AF_INET sk. selftests/tc-testing: Add a test for HFSC eltree double add with reentrant enqueue behaviour on netem net_sched: hfsc: Address reentrant enqueue adding class to eltree twice octeontx2-pf: QOS: Refactor TC_HTB_LEAF_DEL_LAST callback octeontx2-pf: QOS: Perform cache sync on send queue teardown net: mana: Add support for Multi Vports on Bare metal net: devmem: ncdevmem: remove unused variable net: devmem: ksft: upgrade rx test to send 1K data net: devmem: ksft: add 5 tuple FS support net: devmem: ksft: add exit_wait to make rx test pass net: devmem: ksft: add ipv4 support net: devmem: preserve sockc_err page_pool: fix ugly page_pool formatting net: devmem: move list_add to net_devmem_bind_dmabuf. selftests: netfilter: nft_queue.sh: include file transfer duration in log message net: phy: mscc: Fix memory leak when using one step timestamping ...
2025-05-13amd-xgbe: add support for new pci device id 0x1641Raju Rangoju
Add support for new pci device id 0x1641 to register Renoir device with PCIe. Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250509155325.720499-6-Raju.Rangoju@amd.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-05-13amd-xgbe: Add XGBE_XPCS_ACCESS_V3 support to xgbe_pci_probe()Raju Rangoju
A new version of XPCS access routines have been introduced, add the support to xgbe_pci_probe() to use these routines. Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250509155325.720499-5-Raju.Rangoju@amd.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-05-13amd-xgbe: add support for new XPCS routinesRaju Rangoju
Add the necessary support to enable Renoir ethernet device. Since the BAR1 address cannot be used to access the XPCS registers on Renoir, use the smn functions. Some of the ethernet add-in-cards have dual PHY but share a single MDIO line (between the ports). In such cases, link inconsistencies are noticed during the heavy traffic and during reboot stress tests. Using smn calls helps avoid such race conditions. Suggested-by: Sudheesh Mavila <sudheesh.mavila@amd.com> Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250509155325.720499-4-Raju.Rangoju@amd.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-05-13amd-xgbe: reorganize the xgbe_pci_probe() code pathRaju Rangoju
Reorganize the xgbe_pci_probe() code path to convert if/else statements to switch case to help add future code. This helps code look cleaner. Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250509155325.720499-3-Raju.Rangoju@amd.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-05-13amd-xgbe: reorganize the code of XPCS accessRaju Rangoju
The xgbe_{read/write}_mmd_regs_v* functions have common code which can be moved to helper functions. Add new helper functions to calculate the mmd_address for v1/v2 of xpcs access. Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250509155325.720499-2-Raju.Rangoju@amd.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-05-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR (net-6.15-rc5). No conflicts or adjacent changes. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-28amd-xgbe: Fix to ensure dependent features are toggled with RX checksum offloadVishal Badole
According to the XGMAC specification, enabling features such as Layer 3 and Layer 4 Packet Filtering, Split Header and Virtualized Network support automatically selects the IPC Full Checksum Offload Engine on the receive side. When RX checksum offload is disabled, these dependent features must also be disabled to prevent abnormal behavior caused by mismatched feature dependencies. Ensure that toggling RX checksum offload (disabling or enabling) properly disables or enables all dependent features, maintaining consistent and expected behavior in the network device. Cc: stable@vger.kernel.org Fixes: 1a510ccf5869 ("amd-xgbe: Add support for VXLAN offload capabilities") Signed-off-by: Vishal Badole <Vishal.Badole@amd.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250424130248.428865-1-Vishal.Badole@amd.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR (net-6.15-rc2). Conflict: Documentation/networking/netdevices.rst net/core/lock_debug.c 04efcee6ef8d ("net: hold instance lock during NETDEV_CHANGE") 03df156dd3a6 ("xdp: double protect netdev->xdp_flags with netdev->lock") No adjacent changes. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-08amd-xgbe: Convert to SPDX identifierRaju Rangoju
Use SPDX-License-Identifier accross all the files of the xgbe driver to ensure compliance with Linux kernel standards, thus removing the boiler-plate template license text. Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com> Acked-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250407102913.3063691-1-Raju.Rangoju@amd.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-04-05treewide: Switch/rename to timer_delete[_sync]()Thomas Gleixner
timer_delete[_sync]() replaces del_timer[_sync](). Convert the whole tree over and remove the historical wrapper inlines. Conversion was done with coccinelle plus manual fixups where necessary. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2025-01-28Merge tag 'driver-core-6.14-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core and debugfs updates from Greg KH: "Here is the big set of driver core and debugfs updates for 6.14-rc1. Included in here is a bunch of driver core, PCI, OF, and platform rust bindings (all acked by the different subsystem maintainers), hence the merge conflict with the rust tree, and some driver core api updates to mark things as const, which will also require some fixups due to new stuff coming in through other trees in this merge window. There are also a bunch of debugfs updates from Al, and there is at least one user that does have a regression with these, but Al is working on tracking down the fix for it. In my use (and everyone else's linux-next use), it does not seem like a big issue at the moment. Here's a short list of the things in here: - driver core rust bindings for PCI, platform, OF, and some i/o functions. We are almost at the "write a real driver in rust" stage now, depending on what you want to do. - misc device rust bindings and a sample driver to show how to use them - debugfs cleanups in the fs as well as the users of the fs api for places where drivers got it wrong or were unnecessarily doing things in complex ways. - driver core const work, making more of the api take const * for different parameters to make the rust bindings easier overall. - other small fixes and updates All of these have been in linux-next with all of the aforementioned merge conflicts, and the one debugfs issue, which looks to be resolved "soon"" * tag 'driver-core-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (95 commits) rust: device: Use as_char_ptr() to avoid explicit cast rust: device: Replace CString with CStr in property_present() devcoredump: Constify 'struct bin_attribute' devcoredump: Define 'struct bin_attribute' through macro rust: device: Add property_present() saner replacement for debugfs_rename() orangefs-debugfs: don't mess with ->d_name octeontx2: don't mess with ->d_parent or ->d_parent->d_name arm_scmi: don't mess with ->d_parent->d_name slub: don't mess with ->d_name sof-client-ipc-flood-test: don't mess with ->d_name qat: don't mess with ->d_name xhci: don't mess with ->d_iname mtu3: don't mess wiht ->d_iname greybus/camera - stop messing with ->d_iname mediatek: stop messing with ->d_iname netdevsim: don't embed file_operations into your structs b43legacy: make use of debugfs_get_aux() b43: stop embedding struct file_operations into their objects carl9170: stop embedding file_operations into their objects ...
2025-01-15net: ethernet: xgbe: re-add aneg to supported features in PHY quirksHeiner Kallweit
In 4.19, before the switch to linkmode bitmaps, PHY_GBIT_FEATURES included feature bits for aneg and TP/MII ports. SUPPORTED_TP | \ SUPPORTED_MII) SUPPORTED_10baseT_Full) SUPPORTED_100baseT_Full) SUPPORTED_1000baseT_Full) PHY_100BT_FEATURES | \ PHY_DEFAULT_FEATURES) PHY_1000BT_FEATURES) Referenced commit expanded PHY_GBIT_FEATURES, silently removing PHY_DEFAULT_FEATURES. The removed part can be re-added by using the new PHY_GBIT_FEATURES definition. Not clear to me is why nobody seems to have noticed this issue. I stumbled across this when checking what it takes to make phy_10_100_features_array et al private to phylib. Fixes: d0939c26c53a ("net: ethernet: xgbe: expand PHY_GBIT_FEAUTRES") Cc: stable@vger.kernel.org Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://patch.msgid.link/46521973-7738-4157-9f5e-0bb6f694acba@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-15saner replacement for debugfs_rename()Al Viro
Existing primitive has several problems: 1) calling conventions are clumsy - it returns a dentry reference that is either identical to its second argument or is an ERR_PTR(-E...); in both cases no refcount changes happen. Inconvenient for users and bug-prone; it would be better to have it return 0 on success and -E... on failure. 2) it allows cross-directory moves; however, no such caller have ever materialized and considering the way debugfs is used, it's unlikely to happen in the future. What's more, any such caller would have fun issues to deal with wrt interplay with recursive removal. It also makes the calling conventions clumsier... 3) tautological rename fails; the callers have no race-free way to deal with that. 4) new name must have been formed by the caller; quite a few callers have it done by sprintf/kasprintf/etc., ending up with considerable boilerplate. Proposed replacement: int debugfs_change_name(dentry, fmt, ...). All callers convert to that easily, and it's simpler internally. IMO debugfs_rename() should go; if we ever get a real-world use case for cross-directory moves in debugfs, we can always look into the right way to handle that. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Link: https://lore.kernel.org/r/20250112080705.141166-21-viro@zeniv.linux.org.uk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-10-29amd-xgbe: use ethtool string helpersRosen Penev
The latter is the preferred way to copy ethtool strings. Avoids manually incrementing the pointer. Signed-off-by: Rosen Penev <rosenp@gmail.com> Acked-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20241022233203.9670-1-rosenp@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-10-04net: ethernet: Switch back to struct platform_driver::remove()Uwe Kleine-König
After commit 0edb555a65d1 ("platform: Make platform_driver::remove() return void") .remove() is (again) the right callback to implement for platform drivers. Convert all platform drivers below drivers/net/ethernet to use .remove(), with the eventual goal to drop struct platform_driver::remove_new(). As .remove() and .remove_new() have the same prototypes, conversion is done by just changing the structure member name in the driver initializer. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com> Link: https://patch.msgid.link/18f7c585a1a8a8ac8b03a2fca7de19bd5c52ac2b.1727949050.git.u.kleine-koenig@baylibre.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-09amd-xgbe: Remove setting of RX software timestampGal Pressman
The responsibility for reporting of RX software timestamp has moved to the core layer (see __ethtool_get_ts_info()), remove usage from the device drivers. Reviewed-by: Carolina Jubran <cjubran@nvidia.com> Reviewed-by: Rahul Rameshbabu <rrameshbabu@nvidia.com> Signed-off-by: Gal Pressman <gal@nvidia.com> Acked-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Link: https://patch.msgid.link/20240906144632.404651-5-gal@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit v1.2.3 (git 2.0.4) at 2026-03-25 15:29:55 +0000