| Age | Commit message (Collapse) | Author |
|
Conversion performed via this Coccinelle script:
// SPDX-License-Identifier: GPL-2.0-only
// Options: --include-headers-for-types --all-includes --include-headers --keep-comments
virtual patch
@gfp depends on patch && !(file in "tools") && !(file in "samples")@
identifier ALLOC = {kmalloc_obj,kmalloc_objs,kmalloc_flex,
kzalloc_obj,kzalloc_objs,kzalloc_flex,
kvmalloc_obj,kvmalloc_objs,kvmalloc_flex,
kvzalloc_obj,kvzalloc_objs,kvzalloc_flex};
@@
ALLOC(...
- , GFP_KERNEL
)
$ make coccicheck MODE=patch COCCI=gfp.cocci
Build and boot tested x86_64 with Fedora 42's GCC and Clang:
Linux version 6.19.0+ (user@host) (gcc (GCC) 15.2.1 20260123 (Red Hat 15.2.1-7), GNU ld version 2.44-12.fc42) #1 SMP PREEMPT_DYNAMIC 1970-01-01
Linux version 6.19.0+ (user@host) (clang version 20.1.8 (Fedora 20.1.8-4.fc42), LLD 20.1.8) #1 SMP PREEMPT_DYNAMIC 1970-01-01
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This converts some of the visually simpler cases that have been split
over multiple lines. I only did the ones that are easy to verify the
resulting diff by having just that final GFP_KERNEL argument on the next
line.
Somebody should probably do a proper coccinelle script for this, but for
me the trivial script actually resulted in an assertion failure in the
middle of the script. I probably had made it a bit _too_ trivial.
So after fighting that far a while I decided to just do some of the
syntactically simpler cases with variations of the previous 'sed'
scripts.
The more syntactically complex multi-line cases would mostly really want
whitespace cleanup anyway.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This is the exact same thing as the 'alloc_obj()' version, only much
smaller because there are a lot fewer users of the *alloc_flex()
interface.
As with alloc_obj() version, this was done entirely with mindless brute
force, using the same script, except using 'flex' in the pattern rather
than 'objs*'.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
- "ocfs2: give ocfs2 the ability to reclaim suballocator free bg" saves
disk space by teaching ocfs2 to reclaim suballocator block group
space (Heming Zhao)
- "Add ARRAY_END(), and use it to fix off-by-one bugs" adds the
ARRAY_END() macro and uses it in various places (Alejandro Colomar)
- "vmcoreinfo: support VMCOREINFO_BYTES larger than PAGE_SIZE" makes
the vmcore code future-safe, if VMCOREINFO_BYTES ever exceeds the
page size (Pnina Feder)
- "kallsyms: Prevent invalid access when showing module buildid" cleans
up kallsyms code related to module buildid and fixes an invalid
access crash when printing backtraces (Petr Mladek)
- "Address page fault in ima_restore_measurement_list()" fixes a
kexec-related crash that can occur when booting the second-stage
kernel on x86 (Harshit Mogalapalli)
- "kho: ABI headers and Documentation updates" updates the kexec
handover ABI documentation (Mike Rapoport)
- "Align atomic storage" adds the __aligned attribute to atomic_t and
atomic64_t definitions to get natural alignment of both types on
csky, m68k, microblaze, nios2, openrisc and sh (Finn Thain)
- "kho: clean up page initialization logic" simplifies the page
initialization logic in kho_restore_page() (Pratyush Yadav)
- "Unload linux/kernel.h" moves several things out of kernel.h and into
more appropriate places (Yury Norov)
- "don't abuse task_struct.group_leader" removes the usage of
->group_leader when it is "obviously unnecessary" (Oleg Nesterov)
- "list private v2 & luo flb" adds some infrastructure improvements to
the live update orchestrator (Pasha Tatashin)
* tag 'mm-nonmm-stable-2026-02-12-10-48' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (107 commits)
watchdog/hardlockup: simplify perf event probe and remove per-cpu dependency
procfs: fix missing RCU protection when reading real_parent in do_task_stat()
watchdog/softlockup: fix sample ring index wrap in need_counting_irqs()
kcsan, compiler_types: avoid duplicate type issues in BPF Type Format
kho: fix doc for kho_restore_pages()
tests/liveupdate: add in-kernel liveupdate test
liveupdate: luo_flb: introduce File-Lifecycle-Bound global state
liveupdate: luo_file: Use private list
list: add kunit test for private list primitives
list: add primitives for private list manipulations
delayacct: fix uapi timespec64 definition
panic: add panic_force_cpu= parameter to redirect panic to a specific CPU
netclassid: use thread_group_leader(p) in update_classid_task()
RDMA/umem: don't abuse current->group_leader
drm/pan*: don't abuse current->group_leader
drm/amd: kill the outdated "Only the pthreads threading model is supported" checks
drm/amdgpu: don't abuse current->group_leader
android/binder: use same_thread_group(proc->tsk, current) in binder_mmap()
android/binder: don't abuse current->group_leader
kho: skip memoryless NUMA nodes when reserving scratch areas
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"Core & protocols:
- A significant effort all around the stack to guide the compiler to
make the right choice when inlining code, to avoid unneeded calls
for small helper and stack canary overhead in the fast-path.
This generates better and faster code with very small or no text
size increases, as in many cases the call generated more code than
the actual inlined helper.
- Extend AccECN implementation so that is now functionally complete,
also allow the user-space enabling it on a per network namespace
basis.
- Add support for memory providers with large (above 4K) rx buffer.
Paired with hw-gro, larger rx buffer sizes reduce the number of
buffers traversing the stack, dincreasing single stream CPU usage
by up to ~30%.
- Do not add HBH header to Big TCP GSO packets. This simplifies the
RX path, the TX path and the NIC drivers, and is possible because
user-space taps can now interpret correctly such packets without
the HBH hint.
- Allow IPv6 routes to be configured with a gateway address that is
resolved out of a different interface than the one specified,
aligning IPv6 to IPv4 behavior.
- Multi-queue aware sch_cake. This makes it possible to scale the
rate shaper of sch_cake across multiple CPUs, while still enforcing
a single global rate on the interface.
- Add support for the nbcon (new buffer console) infrastructure to
netconsole, enabling lock-free, priority-based console operations
that are safer in crash scenarios.
- Improve the TCP ipv6 output path to cache the flow information,
saving cpu cycles, reducing cache line misses and stack use.
- Improve netfilter packet tracker to resolve clashes for most
protocols, avoiding unneeded drops on rare occasions.
- Add IP6IP6 tunneling acceleration to the flowtable infrastructure.
- Reduce tcp socket size by one cache line.
- Notify neighbour changes atomically, avoiding inconsistencies
between the notification sequence and the actual states sequence.
- Add vsock namespace support, allowing complete isolation of vsocks
across different network namespaces.
- Improve xsk generic performances with cache-alignment-oriented
optimizations.
- Support netconsole automatic target recovery, allowing netconsole
to reestablish targets when underlying low-level interface comes
back online.
Driver API:
- Support for switching the working mode (automatic vs manual) of a
DPLL device via netlink.
- Introduce PHY ports representation to expose multiple front-facing
media ports over a single MAC.
- Introduce "rx-polarity" and "tx-polarity" device tree properties,
to generalize polarity inversion requirements for differential
signaling.
- Add helper to create, prepare and enable managed clocks.
Device drivers:
- Add Huawei hinic3 PF etherner driver.
- Add DWMAC glue driver for Motorcomm YT6801 PCIe ethernet
controller.
- Add ethernet driver for MaxLinear MxL862xx switches
- Remove parallel-port Ethernet driver.
- Convert existing driver timestamp configuration reporting to
hwtstamp_get and remove legacy ioctl().
- Convert existing drivers to .get_rx_ring_count(), simplifing the RX
ring count retrieval. Also remove the legacy fallback path.
- Ethernet high-speed NICs:
- Broadcom (bnxt, bng):
- bnxt: add FW interface update to support FEC stats histogram
and NVRAM defragmentation
- bng: add TSO and H/W GRO support
- nVidia/Mellanox (mlx5):
- improve latency of channel restart operations, reducing the
used H/W resources
- add TSO support for UDP over GRE over VLAN
- add flow counters support for hardware steering (HWS) rules
- use a static memory area to store headers for H/W GRO,
leading to 12% RX tput improvement
- Intel (100G, ice, idpf):
- ice: reorganizes layout of Tx and Rx rings for cacheline
locality and utilizes __cacheline_group* macros on the new
layouts
- ice: introduces Synchronous Ethernet (SyncE) support
- Meta (fbnic):
- adds debugfs for firmware mailbox and tx/rx rings vectors
- Ethernet virtual:
- geneve: introduce GRO/GSO support for double UDP encapsulation
- Ethernet NICs consumer, and embedded:
- Synopsys (stmmac):
- some code refactoring and cleanups
- RealTek (r8169):
- add support for RTL8127ATF (10G Fiber SFP)
- add dash and LTR support
- Airoha:
- AN8811HB 2.5 Gbps phy support
- Freescale (fec):
- add XDP zero-copy support
- Thunderbolt:
- add get link setting support to allow bonding
- Renesas:
- add support for RZ/G3L GBETH SoC
- Ethernet switches:
- Maxlinear:
- support R(G)MII slow rate configuration
- add support for Intel GSW150
- Motorcomm (yt921x):
- add DCB/QoS support
- TI:
- icssm-prueth: support bridging (STP/RSTP) via the switchdev
framework
- Ethernet PHYs:
- Realtek:
- enable SGMII and 2500Base-X in-band auto-negotiation
- simplify and reunify C22/C45 drivers
- Micrel: convert bindings to DT schema
- CAN:
- move skb headroom content into skb extensions, making CAN
metadata access more robust
- CAN drivers:
- rcar_canfd:
- add support for FD-only mode
- add support for the RZ/T2H SoC
- sja1000: cleanup the CAN state handling
- WiFi:
- implement EPPKE/802.1X over auth frames support
- split up drop reasons better, removing generic RX_DROP
- additional FTM capabilities: 6 GHz support, supported number of
spatial streams and supported number of LTF repetitions
- better mac80211 iterators to enumerate resources
- initial UHR (Wi-Fi 8) support for cfg80211/mac80211
- WiFi drivers:
- Qualcomm/Atheros:
- ath11k: support for Channel Frequency Response measurement
- ath12k: a significant driver refactor to support multi-wiphy
devices and and pave the way for future device support in the
same driver (rather than splitting to ath13k)
- ath12k: support for the QCC2072 chipset
- Intel:
- iwlwifi: partial Neighbor Awareness Networking (NAN) support
- iwlwifi: initial support for U-NII-9 and IEEE 802.11bn
- RealTek (rtw89):
- preparations for RTL8922DE support
- Bluetooth:
- implement setsockopt(BT_PHY) to set the connection packet type/PHY
- set link_policy on incoming ACL connections
- Bluetooth drivers:
- btusb: add support for MediaTek7920, Realtek RTL8761BU and 8851BE
- btqca: add WCN6855 firmware priority selection feature"
* tag 'net-next-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1254 commits)
bnge/bng_re: Add a new HSI
net: macb: Fix tx/rx malfunction after phy link down and up
af_unix: Fix memleak of newsk in unix_stream_connect().
net: ti: icssg-prueth: Add optional dependency on HSR
net: dsa: add basic initial driver for MxL862xx switches
net: mdio: add unlocked mdiodev C45 bus accessors
net: dsa: add tag format for MxL862xx switches
dt-bindings: net: dsa: add MaxLinear MxL862xx
selftests: drivers: net: hw: Modify toeplitz.c to poll for packets
octeontx2-pf: Unregister devlink on probe failure
net: renesas: rswitch: fix forwarding offload statemachine
ionic: Rate limit unknown xcvr type messages
tcp: inet6_csk_xmit() optimization
tcp: populate inet->cork.fl.u.ip6 in tcp_v6_syn_recv_sock()
tcp: populate inet->cork.fl.u.ip6 in tcp_v6_connect()
ipv6: inet6_csk_xmit() and inet6_csk_update_pmtu() use inet->cork.fl.u.ip6
ipv6: use inet->cork.fl.u.ip6 and np->final in ip6_datagram_dst_update()
ipv6: use np->final in inet6_sk_rebuild_header()
ipv6: add daddr/final storage in struct ipv6_pinfo
net: stmmac: qcom-ethqos: fix qcom_ethqos_serdes_powerup()
...
|
|
Remove <linux/hex.h> from <linux/kernel.h> and update all users/callers of
hex.h interfaces to directly #include <linux/hex.h> as part of the process
of putting kernel.h on a diet.
Removing hex.h from kernel.h means that 36K C source files don't have to
pay the price of parsing hex.h for the roughly 120 C source files that
need it.
This change has been build-tested with allmodconfig on most ARCHes. Also,
all users/callers of <linux/hex.h> in the entire source tree have been
updated if needed (if not already #included).
Link: https://lkml.kernel.org/r/20251215005206.2362276-1-rdunlap@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Yury Norov (NVIDIA) <yury.norov@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Use the newly introduced .get_rx_ring_count ethtool ops callback instead
of handling ETHTOOL_GRXRINGS directly in .get_rxnfc().
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20260115-grxring_big_v2-v1-7-b3e1b58bced5@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Switch from the old AES library functions (which use struct
crypto_aes_ctx) to the new ones (which use struct aes_enckey). This
eliminates the unnecessary computation and caching of the decryption
round keys. The new AES en/decryption functions are also much faster
and use AES instructions when supported by the CPU.
Note that in addition to the change in the key preparation function and
the key struct type itself, the change in the type of the key struct
results in aes_encrypt() (which is temporarily a type-generic macro)
calling the new encryption function rather than the old one.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20260112192035.10427-21-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull PCI updates from Bjorn Helgaas:
"Enumeration:
- Enable host bridge emulation for PCI_DOMAINS_GENERIC platforms (Dan
Williams)
- Switch vmd from custom domain number allocator to the common
allocator to prevent a potential race with new non-VMD buses (Dan
Williams)
- Enable Precision Time Measurement (PTM) only if device advertises
support for a relevant role, to prevent invalid PTM Requests that
cause ACS violations that are reported as AER Uncorrectable
Non-Fatal errors (Mika Westerberg)
Resource management:
- Prevent resource tree corruption when BAR resize fails (Ilpo
Järvinen)
- Restore BARs to the original size if a BAR resize fails (Ilpo
Järvinen)
- Remove BAR release from BAR resize attempts by the xe, i915, and
amdgpu drivers so the PCI core can restore BARs if the resize fails
(Ilpo Järvinen)
- Move Resizable BAR code to rebar.c (Ilpo Järvinen)
- Add pci_rebar_size_supported() and use it in i915 and xe (Ilpo
Järvinen)
- Add pci_rebar_get_max_size() and use it in xe and amdgpu (Ilpo
Järvinen)
Power management and error handling:
- For drivers using PCI legacy suspend, save config state at suspend
so that state (not any earlier state from enumeration, probe, or
error recovery) will be restored when resuming (Lukas Wunner)
- For devices with no driver or a driver that lacks power management,
save config state at hibernate so that state (not any earlier state
from enumeration, probe, or error recovery) will be restored when
resuming (Lukas Wunner)
- Save device config space on device addition, before driver binding,
so error recovery works more reliably (Lukas Wunner)
- Drop pci_save_state() from several drivers that no longer need it
since the PCI core always does it and pci_restore_state() no longer
invalidates the saved state (Lukas Wunner)
- Document use of pci_save_state() by drivers to capture the state
they want restored during error recovery (Lukas Wunner)
Power control:
- Add a struct pci_ops.assert_perst() function pointer to
assert/deassert PCIe PERST# and implement it for the qcom driver
(Krishna Chaitanya Chundru)
- Add DT binding and pwrctrl driver for the Toshiba TC9563 PCIe
switch, which must be held in reset after poweron so the pwrctrl
driver can configure the switch via I2C before bringing up the
links (Krishna Chaitanya Chundru)
Endpoint framework:
- Convert the endpoint doorbell test to use a threaded IRQ to fix a
'sleeping while atomic' issue (Bhanu Seshu Kumar Valluri)
- Add endpoint VNTB MSI doorbell support to reduce latency between
host and endpoint (Frank Li)
New native PCIe controller drivers:
- Add CIX Sky1 host controller DT binding and driver (Hans Zhang)
- Add NXP S32G host controller DT binding and driver (Vincent
Guittot)
- Add Renesas RZ/G3S host controller DT binding and driver (Claudiu
Beznea)
- Add SpacemiT K1 host controller DT binding and driver (Alex Elder)
Amlogic Meson PCIe controller driver:
- Update DT binding to name DBI region 'dbi', not 'elbi', and update
driver to support both (Manivannan Sadhasivam)
Apple PCIe controller driver:
- Move struct pci_host_bridge allocation from pci_host_common_init()
to callers, which significantly simplifies pcie-apple (Marc
Zyngier)
Broadcom STB PCIe controller driver:
- Disable advertising ASPM L0s support correctly (Jim Quinlan)
- Add a panic/die handler to print diagnostic info in case PCIe
caused an unrecoverable abort (Jim Quinlan)
Cadence PCIe controller driver:
- Add module support for Cadence platform host and endpoint
controller driver (Manikandan K Pillai)
- Split headers into 'legacy' (LGA) and 'high perf' (HPA) to prepare
for new CIX Sky1 driver (Manikandan K Pillai)
MediaTek PCIe controller driver:
- Convert DT binding to YAML schema (Christian Marangi)
- Add Airoha AN7583 DT compatible and driver support (Christian
Marangi)
Qualcomm PCIe controller driver:
- Add Qualcomm Kaanapali to SM8550 DT binding (Qiang Yu)
- Add required 'power-domains' and 'resets' to qcom sa8775p, sc7280,
sc8280xp, sm8150, sm8250, sm8350, sm8450, sm8550, x1e80100 DT
schemas (Krzysztof Kozlowski)
- Look up OPP using both frequency and data rate (not just frequency)
so RPMh votes can account for both (Krishna Chaitanya Chundru)
Rockchip DesignWare PCIe controller driver:
- Add Rockchip RK3528 compatible strings in DT binding (Yao Zi)
STMicroelectronics STM32MP25 PCIe controller driver:
- Fix a race between link training and endpoint register
initialization (Christian Bruel)
- Align endpoint allocations to match the ATU requirements (Christian
Bruel)
Synopsys DesignWare PCIe controller driver:
- Clear L1 PM Substate Capability 'Supported' bits unless glue driver
says it's supported, which prevents users from enabling non-working
L1SS. Currently only qcom and tegra194 support L1SS (Bjorn Helgaas)
- Remove now-superfluous L1SS disable code from tegra194 (Bjorn
Helgaas)
- Configure L1SS support in dw-rockchip when DT says
'supports-clkreq' (Shawn Lin)
TI Keystone PCIe controller driver:
- Fail the probe instead of silently succeeding if ks_pcie_of_data
didn't specify Root Complex or Endpoint mode (Siddharth Vadapalli)
- Make keystone buildable as a loadable module, except on ARM32 where
hook_fault_code() is __init (Siddharth Vadapalli)"
* tag 'pci-v6.19-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (100 commits)
MAINTAINERS: Add Manivannan Sadhasivam as PCI/pwrctrl maintainer
MAINTAINERS: Add CIX Sky1 PCIe controller driver maintainer
PCI: sky1: Add PCIe host support for CIX Sky1
dt-bindings: PCI: Add CIX Sky1 PCIe Root Complex bindings
PCI: cadence: Add support for High Perf Architecture (HPA) controller
MAINTAINERS: Add NXP S32G PCIe controller driver maintainer
PCI: s32g: Add NXP S32G PCIe controller driver (RC)
PCI: dwc: Add register and bitfield definitions
dt-bindings: PCI: s32g: Add NXP S32G PCIe controller
PCI: Add Renesas RZ/G3S host controller driver
PCI: host-generic: Move bridge allocation outside of pci_host_common_init()
dt-bindings: PCI: Add Renesas RZ/G3S PCIe controller binding
PCI: Validate pci_rebar_size_supported() input
Documentation: PCI: Amend error recovery doc with pci_save_state() rules
treewide: Drop pci_save_state() after pci_restore_state()
PCI/ERR: Ensure error recoverability at all times
PCI/PM: Stop needlessly clearing state_saved on enumeration and thaw
PCI/PM: Reinstate clearing state_saved in legacy and !PM codepaths
PCI: dw-rockchip: Configure L1SS support
PCI: tegra194: Remove unnecessary L1SS disable code
...
|
|
-Wflex-array-member-not-at-end was introduced in GCC-14, and we are
getting ready to enable it, globally.
Use the `DEFINE_RAW_FLEX()` helper for on-stack definitions of
a flexible structure where the size of the flexible-array member
is known at compile-time, and refactor the rest of the code,
accordingly.
So, with these changes, fix the following warning:
drivers/net/ethernet/chelsio/inline_crypto/chtls/chtls_io.c:163:36: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://patch.msgid.link/aSQocKoJGkN0wzEj@kspp
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
drivers/net/ethernet/chelsio/cxgb4/sched.h declares a sched_class
struct which has a type name clash with struct sched_class
in kernel/sched/sched.h (a type used in a field in task_struct).
When cxgb4 is a builtin we end up with both sched_class types,
and as a result of this we wind up with DWARF (and derived from
that BTF) with a duplicate incorrect task_struct representation.
When cxgb4 is built-in this type clash can cause kernel builds to
fail as resolve_btfids will fail when confused which task_struct
to use. See [1] for more details.
As such, renaming sched_class to ch_sched_class (in line with
other structs like ch_sched_flowc) makes sense.
[1] https://lore.kernel.org/bpf/2412725b-916c-47bd-91c3-c2d57e3e6c7b@acm.org/
Reported-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Acked-by: Potnuri Bharat Teja <bharat@chelsio.com>
Link: https://patch.msgid.link/20251121181231.64337-1-alan.maguire@oracle.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In 2009, commit c82f63e411f1 ("PCI: check saved state before restore")
changed the behavior of pci_restore_state() such that it became necessary
to call pci_save_state() afterwards, lest recovery from subsequent PCI
errors fails.
The commit has just been reverted and so all the pci_save_state() after
pci_restore_state() calls that have accumulated in the tree are now
superfluous. Drop them.
Two drivers chose a different approach to achieve the same result:
drivers/scsi/ipr.c and drivers/net/ethernet/intel/e1000e/netdev.c set the
pci_dev's "state_saved" flag to true before calling pci_restore_state().
Drop this as well.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Dave Jiang <dave.jiang@intel.com>
Acked-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> # qat
Link: https://patch.msgid.link/c2b28cc4defa1b743cf1dedee23c455be98b397a.1760274044.git.lukas@wunner.de
|
|
Cross-merge networking fixes after downstream PR (net-6.18-rc4).
No conflicts, adjacent changes:
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
ded9813d17d3 ("net: stmmac: Consider Tx VLAN offload tag length for maxSDU")
26ab9830beab ("net: stmmac: replace has_xxxx with core_type")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This patch adds support for matching fragmented packets in tc flower
filters.
Previously, commit 93a8540aac72 ("cxgb4: flower: validate control flags")
added a check using flow_rule_match_has_control_flags() to reject
any rules with control flags, as the driver did not support
fragmentation at that time.
Now, with this patch, support for FLOW_DIS_IS_FRAGMENT is added:
- The driver checks for control flags using
flow_rule_is_supp_control_flags(), as recommended in
commit d11e63119432 ("flow_offload: add control flag checking helpers").
- If the fragmentation flag is present, the driver sets `fs->val.frag` and
`fs->mask.frag` accordingly in the filter specification.
Since fragmentation is now supported, the earlier check that rejected all
control flags (flow_rule_match_has_control_flags()) has been removed.
Signed-off-by: Harshita V Rajput <harshitha.vr@chelsio.com>
Signed-off-by: Potnuri Bharat Teja <bharat@chelsio.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20251028075255.1391596-1-harshitha.vr@chelsio.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ch_ipsec_xfrm_add_state() callback
In ch_ipsec_xfrm_add_state() there is not check of try_module_get
return value. It is very unlikely, but try_module_get() could return
false value, which could cause use-after-free error.
Conditions: The module count must be zero, and a module unload in
progress. The thread doing the unload is blocked somewhere.
Another thread makes a callback into the module for some request
that (for instance) would need to create a kernel thread.
It tries to get a reference for the thread.
So try_module_get(THIS_MODULE) is the right call - and will fail here.
This fix adds checking the result of try_module_get call
Fixes: 6dad4e8ab3ec ("chcr: Add support for Inline IPSec")
Signed-off-by: Pavel Zhigulin <Pavel.Zhigulin@kaspersky.com>
Link: https://patch.msgid.link/20251024161304.724436-1-Pavel.Zhigulin@kaspersky.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Convert to use .ndo_hwtstamp_get()/.ndo_hwtstamp_set() callbacks.
There is some change in the logic as well. Previously, the driver was
storing newly requested configuration regardless of whether it was
applied or not. In case of request validation error, inconsistent
configuration would be returned by the driver. New logic stores
configuration only if was properly validated and applied. It brings the
consistency between reported and actual configuration.
Signed-off-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20251016152515.3510991-6-vadim.fedorenko@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In {tcp6,udp6,raw6}_sock, struct ipv6_pinfo is always placed at
the beginning of a new cache line because
1. __alignof__(struct tcp_sock) is 64 due to ____cacheline_aligned
of __cacheline_group_begin(tcp_sock_write_tx)
2. __alignof__(struct udp_sock) is 64 due to ____cacheline_aligned
of struct numa_drop_counters
3. in raw6_sock, struct numa_drop_counters is placed before
struct ipv6_pinfo
. struct ipv6_pinfo is 136 bytes, but the last cache line is
only used by ipv6_fl_list:
$ pahole -C ipv6_pinfo vmlinux
struct ipv6_pinfo {
...
/* --- cacheline 2 boundary (128 bytes) --- */
struct ipv6_fl_socklist * ipv6_fl_list; /* 128 8 */
/* size: 136, cachelines: 3, members: 23 */
Let's move ipv6_fl_list from struct ipv6_pinfo to struct inet_sock
to save a full cache line for {tcp6,udp6,raw6}_sock.
Now, struct ipv6_pinfo is 128 bytes, and {tcp6,udp6,raw6}_sock have
64 bytes less, while {tcp,udp,raw}_sock retain the same size.
Before:
# grep -E "^(RAW|UDP[^L\-]|TCP)" /proc/slabinfo | awk '{print $1, "\t", $4}'
RAWv6 1408
UDPv6 1472
TCPv6 2560
RAW 1152
UDP 1280
TCP 2368
After:
# grep -E "^(RAW|UDP[^L\-]|TCP)" /proc/slabinfo | awk '{print $1, "\t", $4}'
RAWv6 1344
UDPv6 1408
TCPv6 2496
RAW 1152
UDP 1280
TCP 2368
Also, ipv6_fl_list and inet_flags (SNDFLOW bit) are placed in the
same cache line.
$ pahole -C inet_sock vmlinux
...
/* --- cacheline 11 boundary (704 bytes) was 56 bytes ago --- */
struct ipv6_pinfo * pinet6; /* 760 8 */
/* --- cacheline 12 boundary (768 bytes) --- */
struct ipv6_fl_socklist * ipv6_fl_list; /* 768 8 */
unsigned long inet_flags; /* 776 8 */
Doc churn is due to the insufficient Type column (only 1 space short).
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20251014224210.2964778-1-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
TCP tracks the number of orphaned (SOCK_DEAD but not yet destructed)
sockets in tcp_orphan_count.
In some code that was shared with DCCP, tcp_orphan_count is referenced
via sk->sk_prot->orphan_count.
Let's reference tcp_orphan_count directly.
inet_csk_prepare_for_destroy_sock() is moved to inet_connection_sock.c
due to header dependency.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250829215641.711664-1-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This field is already read locklessly for listeners,
next patch will make setsockopt(TCP_MAXSEG) lockless.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Neal Cardwell <ncardwell@google.com>
Link: https://patch.msgid.link/20250821141901.18839-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Going forward skb_dst_set will assert that skb dst_entry
is empty during skb_dst_set. skb_dstref_steal is added to reset
existing entry without doing refcnt. Chelsio driver is
doing extra dst management via skb_dst_set(NULL). Replace
these calls with skb_dstref_steal.
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250818154032.3173645-7-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix typos in comments and error messages.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: David Arinzon <darinzon@amazon.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250723201528.2908218-1-helgaas@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since its introduction in commit 2e910b95329c ("net: Add a function to
splice pages into an skbuff for MSG_SPLICE_PAGES"), skb_splice_from_iter()
never used the @gfp argument. Remove it and adapt callers.
No functional change intended.
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Link: https://patch.msgid.link/20250702-splice-drop-unused-v3-2-55f68b60d2b7@rbox.co
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Migrate to new callbacks added by commit 9bb00786fc61 ("net: ethtool:
add dedicated callbacks for getting and setting rxfh fields").
This driver's RXFH config is read only / fixed so the conversion
is purely factoring out the handling into a helper.
Reviewed-by: Joe Damato <joe@dama.to>
Link: https://patch.msgid.link/20250614180638.4166766-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR (net-6.16-rc2).
No conflicts or adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The last use of t3_l2t_send_event() was removed in 2019 by
commit 30e0f6cf5acb ("RDMA/iw_cxgb3: Remove the iw_cxgb3 module from
kernel")
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Link: https://patch.msgid.link/20250609152330.24027-1-linux@treblig.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Move this API to the canonical timer_*() namespace.
[ tglx: Redone against pre rc1 ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/aB2X0jCKQO56WdMt@gmail.com
|
|
'struct thermal_zone_device_ops' are not modified in this driver.
Constifying these structures moves some data to a read-only section, so
increases overall security, especially when the structure holds some
function pointers.
On a x86_64, with allmodconfig:
Before:
======
text data bss dec hex filename
2912 1064 0 3976 f88 drivers/net/ethernet/chelsio/cxgb4/cxgb4_thermal.o
After:
=====
text data bss dec hex filename
3040 936 0 3976 f88 drivers/net/ethernet/chelsio/cxgb4/cxgb4_thermal.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://patch.msgid.link/e6416e0d15ea27a55fe1fb4e349928ac7bae1b95.1748164843.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next
Steffen Klassert says:
====================
1) Remove some unnecessary strscpy_pad() size arguments.
From Thorsten Blum.
2) Correct use of xso.real_dev on bonding offloads.
Patchset from Cosmin Ratiu.
3) Add hardware offload configuration to XFRM_MSG_MIGRATE.
From Chiachang Wang.
4) Refactor migration setup during cloning. This was
done after the clone was created. Now it is done
in the cloning function itself.
From Chiachang Wang.
5) Validate assignment of maximal possible SEQ number.
Prevent from setting to the maximum sequrnce number
as this would cause for traffic drop.
From Leon Romanovsky.
6) Prevent configuration of interface index when offload
is used. Hardware can't handle this case.i
From Leon Romanovsky.
7) Always use kfree_sensitive() for SA secret zeroization.
From Zilin Guan.
ipsec-next-2025-05-23
* tag 'ipsec-next-2025-05-23' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next:
xfrm: use kfree_sensitive() for SA secret zeroization
xfrm: prevent configuration of interface index when offload is used
xfrm: validate assignment of maximal possible SEQ number
xfrm: Refactor migration setup during the cloning process
xfrm: Migrate offload configuration
bonding: Fix multiple long standing offload races
bonding: Mark active offloaded xfrm_states
xfrm: Add explicit dev to .xdo_dev_state_{add,delete,free}
xfrm: Remove unneeded device check from validate_xmit_xfrm
xfrm: Use xdo.dev instead of xdo.real_dev
net/mlx5: Avoid using xso.real_dev unnecessarily
xfrm: Remove unnecessary strscpy_pad() size arguments
====================
Link: https://patch.msgid.link/20250523075611.3723340-1-steffen.klassert@secunet.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Make sure the call of skb_tx_timestamp is as close as possible to the
doorbell.
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Link: https://patch.msgid.link/20250510134812.48199-3-kerneljasonxing@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Many drivers populate the stats buffer using C-String based APIs (e.g.
ethtool_sprintf() and ethtool_puts()), usually when building up the
list of stats individually (i.e. with a for() loop). This, however,
requires that the source strings be populated in such a way as to have
a terminating NUL byte in the source.
Other drivers populate the stats buffer directly using one big memcpy()
of an entire array of strings. No NUL termination is needed here, as the
bytes are being directly passed through. Yet others will build up the
stats buffer individually, but also use memcpy(). This, too, does not
need NUL termination of the source strings.
However, there are cases where the strings that populate the
source stats strings are exactly ETH_GSTRING_LEN long, and GCC
15's -Wunterminated-string-initialization option complains that the
trailing NUL byte has been truncated. This situation is fine only if the
driver is using the memcpy() approach. If the C-String APIs are used,
the destination string name will have its final byte truncated by the
required trailing NUL byte applied by the C-string API.
For drivers that are already using memcpy() but have initializers that
truncate the NUL terminator, mark their source strings as __nonstring to
silence the GCC warnings.
For drivers that have initializers that truncate the NUL terminator and
are using the C-String APIs, switch to memcpy() to avoid destination
string truncation and mark their source strings as __nonstring to silence
the GCC warnings. (Also introduce ethtool_cpy() as a helper to make this
an easy replacement).
Specifically the following warnings were investigated and addressed:
../drivers/net/ethernet/chelsio/cxgb/cxgb2.c:364:9: warning: initializer-string for array of 'char' truncates NUL terminator but destination lacks 'nonstring' attribute (33 chars into 32 available) [-Wunterminated-string-initialization]
364 | "TxFramesAbortedDueToXSCollisions",
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
../drivers/net/ethernet/freescale/enetc/enetc_ethtool.c:165:33: warning: initializer-string for array of 'char' truncates NUL terminator but destination lacks 'nonstring' attribute (33 chars into 32 available) [-Wunterminated-string-initialization]
165 | { ENETC_PM_R1523X(0), "MAC rx 1523 to max-octet packets" },
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
../drivers/net/ethernet/freescale/enetc/enetc_ethtool.c:190:33: warning: initializer-string for array of 'char' truncates NUL terminator but destination lacks 'nonstring' attribute (33 chars into 32 available) [-Wunterminated-string-initialization]
190 | { ENETC_PM_T1523X(0), "MAC tx 1523 to max-octet packets" },
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
../drivers/net/ethernet/google/gve/gve_ethtool.c:76:9: warning: initializer-string for array of 'char' truncates NUL terminator but destination lacks 'nonstring' attribute (33 chars into 32 available) [-Wunterminated-string-initialization]
76 | "adminq_dcfg_device_resources_cnt", "adminq_set_driver_parameter_cnt",
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
../drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c:117:53: warning: initializer-string for array of 'char' truncates NUL terminator but destination lacks 'nonstring' attribute (33 chars into 32 available) [-Wunterminated-string-initialization]
117 | STMMAC_STAT(ptp_rx_msg_type_pdelay_follow_up),
| ^
../drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c:46:12: note: in definition of macro 'STMMAC_STAT'
46 | { #m, sizeof_field(struct stmmac_extra_stats, m), \
| ^
../drivers/net/ethernet/mellanox/mlxsw/spectrum_ethtool.c:328:24: warning: initializer-string for array of 'char' truncates NUL terminator but destination lacks 'nonstring' attribute (33 chars into 32 available) [-Wunterminated-string-initialization]
328 | .str = "a_mac_control_frames_transmitted",
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
../drivers/net/ethernet/mellanox/mlxsw/spectrum_ethtool.c:340:24: warning: initializer-string for array of 'char' truncates NUL terminator but destination lacks 'nonstring' attribute (33 chars into 32 available) [-Wunterminated-string-initialization]
340 | .str = "a_pause_mac_ctrl_frames_received",
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Kees Cook <kees@kernel.org>
Reviewed-by: Petr Machata <petrm@nvidia.com> # for mlxsw
Reviewed-by: Harshitha Ramamurthy <hramamurthy@google.com>
Link: https://patch.msgid.link/20250416010210.work.904-kees@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In the for loop used to allocate the loc_array and bmap for each port, a
memory leak is possible when the allocation for loc_array succeeds,
but the allocation for bmap fails. This is because when the control flow
goes to the label free_eth_finfo, only the allocations starting from
(i-1)th iteration are freed.
Fix that by freeing the loc_array in the bmap allocation error path.
Fixes: d915c299f1da ("cxgb4: add skeleton for ethtool n-tuple filters")
Signed-off-by: Abdun Nihaal <abdun.nihaal@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250414170649.89156-1-abdun.nihaal@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Previously, device driver IPSec offload implementations would fall into
two categories:
1. Those that used xso.dev to determine the offload device.
2. Those that used xso.real_dev to determine the offload device.
The first category didn't work with bonding while the second did.
In a non-bonding setup the two pointers are the same.
This commit adds explicit pointers for the offload netdevice to
.xdo_dev_state_add() / .xdo_dev_state_delete() / .xdo_dev_state_free()
which eliminates the confusion and allows drivers from the first
category to work with bonding.
xso.real_dev now becomes a private pointer managed by the bonding
driver.
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
timer_delete[_sync]() replaces del_timer[_sync](). Convert the whole tree
over and remove the historical wrapper inlines.
Conversion was done with coccinelle plus manual fixups where necessary.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Almost all drivers except bond and nsim had same check if device
can perform XFRM offload on that specific packet. The check was that
packet doesn't have IPv4 options and IPv6 extensions.
In NIC drivers, the IPv4 HELEN comparison was slightly different, but
the intent was to check for the same conditions. So let's chose more
strict variant as a common base.
Reviewed-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
-Wflex-array-member-not-at-end was introduced in GCC-14, and we are
getting ready to enable it, globally.
Move the conflicting declaration to the end of the structure. Notice
that `struct ethtool_dump` is a flexible structure --a structure that
contains a flexible-array member.
Fix the following warning:
./drivers/net/ethernet/chelsio/cxgb4/cxgb4.h:1215:29: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://patch.msgid.link/Z6GBZ4brXYffLkt_@kspp
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next
Steffen Klassert says:
====================
ipsec-next-2025-01-09
1) Implement the AGGFRAG protocol and basic IP-TFS (RFC9347) functionality.
From Christian Hopps.
2) Support ESN context update to hardware for TX.
From Jianbo Liu.
Please pull or let me know if there are problems.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Previously xfrm_dev_state_advance_esn() was added for RX only. But
it's possible that ESN context also need to be synced to hardware for
TX, so call it for outbound in this patch.
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
During ARP failure, tid is not inserted but _c4iw_free_ep()
attempts to remove tid which results in error.
This patch fixes the issue by avoiding removal of uninserted tid.
Fixes: 59437d78f088 ("cxgb4/chtls: fix ULD connection failures due to wrong TID base")
Signed-off-by: Anumula Murali Mohan Reddy <anumula@chelsio.com>
Signed-off-by: Potnuri Bharat Teja <bharat@chelsio.com>
Link: https://patch.msgid.link/20250103092327.1011925-1-anumula@chelsio.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The "gl->tot_len" variable is controlled by the user. It comes from
process_responses(). On 32bit systems, the "gl->tot_len +
sizeof(struct cpl_pass_accept_req) + sizeof(struct rss_header)" addition
could have an integer wrapping bug. Use size_add() to prevent this.
Fixes: a08943947873 ("crypto: chtls - Register chtls with net tls")
Cc: stable@vger.kernel.org
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/c6bfb23c-2db2-4e1b-b8ab-ba3925c82ef5@stanley.mountain
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
t4_set_vf_mac_acl() uses pf to set mac addr, but t4vf_get_vf_mac_acl()
uses port number to get mac addr, this leads to error when an attempt
to set MAC address on VF's of PF2 and PF3.
This patch fixes the issue by using port number to set mac address.
Fixes: e0cdac65ba26 ("cxgb4vf: configure ports accessible by the VF")
Signed-off-by: Anumula Murali Mohan Reddy <anumula@chelsio.com>
Signed-off-by: Potnuri Bharat Teja <bharat@chelsio.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241206062014.49414-1-anumula@chelsio.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
warnings"
This reverts commit 3bd9b9abdf1563a22041b7255baea6d449902f1a. We cannot
use the new tagged struct group because it throws C++ errors even under
"extern C".
Signed-off-by: Kees Cook <kees@kernel.org>
Link: https://patch.msgid.link/20241115204308.3821419-1-kees@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
-Wflex-array-member-not-at-end was introduced in GCC-14, and we are
getting ready to enable it, globally.
Change the type of the middle struct member currently causing trouble from
`struct ethtool_link_settings` to `struct ethtool_link_settings_hdr`.
Additionally, update the type of some variables in various functions that
don't access the flexible-array member, changing them to the newly created
`struct ethtool_link_settings_hdr`. These changes are needed because the
type of the conflicting middle members changed. So, those instances that
expect the type to be `struct ethtool_link_settings` should be adjusted to
the newly created type `struct ethtool_link_settings_hdr`.
Also, adjust variable declarations to follow the reverse xmas tree
convention.
Fix 3338 of the following -Wflex-array-member-not-at-end warnings:
include/linux/ethtool.h:214:38: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://patch.msgid.link/0bc2809fe2a6c11dd4c8a9a10d9bd65cccdb559b.1730238285.git.gustavoars@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
cxgb3_alloc_stid() and cxgb3_free_stid() have been unused since
commit 30e0f6cf5acb ("RDMA/iw_cxgb3: Remove the iw_cxgb3 module
from kernel")
Remove them.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Link: https://patch.msgid.link/20241013012946.284721-1-linux@treblig.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
t4_free_ofld_rxqs() has been unused since
commit 0fbc81b3ad51 ("chcr/cxgb4i/cxgbit/RDMA/cxgb4: Allocate resources
dynamically for all cxgb4 ULD's")
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Link: https://patch.msgid.link/20241013203831.88051-7-linux@treblig.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
cxgb4_l2t_alloc_switching() has been unused since it was added in
commit f7502659cec8 ("cxgb4: Add API to alloc l2t entry; also update
existing ones")
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Link: https://patch.msgid.link/20241013203831.88051-6-linux@treblig.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
cxgb4_iscsi_init() has been unused since 2016's commit
5999299f1ce9 ("cxgb3i,cxgb4i,libcxgbi: remove iSCSI DDP support")
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Link: https://patch.msgid.link/20241013203831.88051-5-linux@treblig.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
cxgb4_get_srq_entry() has been unused since 2018's commit
e47094751ddc ("cxgb4: Add support to initialise/read SRQ entries")
which added it.
Remove it.
Note: I'm a bit suspicious whether any of the srq code in there
actually does anything useful; without this get I can't see anything
that reads the data, so perhaps the whole thing should go?
But that however would remove one of the opcode handlers, and I have
no way to test that.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Link: https://patch.msgid.link/20241013203831.88051-4-linux@treblig.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
cxgb4_alloc_raw_mac_filt() and cxgb4_free_raw_mac_filt() have been
unused since they were added in 2019 commit
5fab51581f62 ("cxgb4: Add MPS TCAM refcounting for raw mac filters")
Remove them.
This was also the last use of cxgb4_mps_ref_dec().
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Link: https://patch.msgid.link/20241013203831.88051-3-linux@treblig.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|