summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/pensando/ionic
AgeCommit message (Collapse)Author
2025-11-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR (net-6.18-rc5). Conflicts: drivers/net/wireless/ath/ath12k/mac.c 9222582ec524 ("Revert "wifi: ath12k: Fix missing station power save configuration"") 6917e268c433 ("wifi: ath12k: Defer vdev bring-up until CSA finalize to avoid stale beacon") https://lore.kernel.org/11cece9f7e36c12efd732baa5718239b1bf8c950.camel@sipsolutions.net Adjacent changes: drivers/net/ethernet/intel/Kconfig b1d16f7c0063 ("libie: depend on DEBUG_FS when building LIBIE_FWLOG") 93f53db9f9dc ("ice: switch to Page Pool") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-11-03net: ionic: map SKB after pseudo-header checksum prepMohammad Heib
The TSO path called ionic_tx_map_skb() before preparing the TCP pseudo checksum (ionic_tx_tcp_[inner_]pseudo_csum()), which may perform skb_cow_head() and might modifies bytes in the linear header area. Mapping first and then mutating the header risks: - Using a stale DMA address if skb_cow_head() relocates the head, and/or - Device reading stale header bytes on weakly-ordered systems (CPU writes after mapping are not guaranteed visible without an explicit dma_sync_single_for_device()). Reorder the TX path to perform all header mutations (including skb_cow_head()) *before* DMA mapping. Mapping is now done only after the skb layout and header contents are final. This removes the need for any post-mapping dma_sync and prevents on-wire corruption observed under VLAN+TSO load after repeated runs. This change is purely an ordering fix; no functional behavior change otherwise. Fixes: 0f3154e6bcb3 ("ionic: Add Tx and Rx handling") Signed-off-by: Mohammad Heib <mheib@redhat.com> Reviewed-by: Brett Creeley <brett.creeley@amd.com> Link: https://patch.msgid.link/20251031155203.203031-2-mheib@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-11-03net: ionic: add dma_wmb() before ringing TX doorbellMohammad Heib
The TX path currently writes descriptors and then immediately writes to the MMIO doorbell register to notify the NIC. On weakly ordered architectures, descriptor writes may still be pending in CPU or DMA write buffers when the doorbell is issued, leading to the device fetching stale or incomplete descriptors. Add a dma_wmb() in ionic_txq_post() to ensure all descriptor writes are visible to the device before the doorbell MMIO write. Fixes: 0f3154e6bcb3 ("ionic: Add Tx and Rx handling") Signed-off-by: Mohammad Heib <mheib@redhat.com> Link: https://patch.msgid.link/20251031155203.203031-1-mheib@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-10-27ionic: convert to ndo_hwtstamp APIVadim Fedorenko
Convert driver to use .ndo_hwtstamp_get()/.ndo_hwtstamp_set() callbacks. ionic_eth_ioctl() becomes empty, remove it. Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Brett Creeley <brett.creeley@amd.com> Signed-off-by: Vadim Fedorenko <vadim.fedorenko@linux.dev> Link: https://patch.msgid.link/20251023220457.3201122-4-vadim.fedorenko@linux.dev Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-10-03Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds
Pull rdma updates from Jason Gunthorpe: "A new Pensando ionic driver, a new Gen 3 HW support for Intel irdma, and lots of small bnxt_re improvements. - Small bug fixes and improves to hfi1, efa, mlx5, erdma, rdmarvt, siw - Allow userspace access to IB service records through the rdmacm - Optimize dma mapping for erdma - Fix shutdown of the GSI QP in mana - Support relaxed ordering MR and fix a corruption bug with mlx5 DMA Data Direct - Many improvement to bnxt_re: - Debugging features and counters - Improve performance of some commands - Change flow_label reporting in completions - Mirror vnic - RDMA flow support - New RDMA driver for Pensando Ethernet devices: ionic - Gen 3 hardware support for the Intel irdma driver - Fix rdma routing resolution with VRFs" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (85 commits) RDMA/ionic: Fix memory leak of admin q_wr RDMA/siw: Always report immediate post SQ errors RDMA/bnxt_re: improve clarity in ALLOC_PAGE handler RDMA/irdma: Remove unused struct irdma_cq fields RDMA/irdma: Fix positive vs negative error codes in irdma_post_send() RDMA/bnxt_re: Remove non-statistics counters from hw_counters RDMA/bnxt_re: Add debugfs info entry for device and resource information RDMA/bnxt_re: Fix incorrect errno used in function comments RDMA: Use %pe format specifier for error pointers RDMA/ionic: Use ether_addr_copy instead of memcpy RDMA/ionic: Fix build failure on SPARC due to xchg() operand size RDMA/rxe: Fix race in do_task() when draining IB/sa: Fix sa_local_svc_timeout_ms read race IB/ipoib: Ignore L3 master device RDMA/core: Use route entry flag to decide on loopback traffic RDMA/core: Resolve MAC of next-hop device without ARP support RDMA/core: Squash a single user static function RDMA/irdma: Update Kconfig RDMA/irdma: Extend CQE Error and Flush Handling for GEN3 Devices RDMA/irdma: Add Atomic Operations support ...
2025-09-14ionic: use int type for err in ionic_get_module_eeprom_by_pageAlok Tiwari
The variable 'err' is declared as u32, but it is used to store negative error codes such as -EINVAL. Changing the type of 'err' to int ensures proper representation of negative error codes and aligns with standard kernel error handling conventions. Also, there is no need to initialize 'err' since it is always set before being used. Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com> Reviewed-by: Shannon Nelson <sln@onemain.com> Reviewed-by: Brett Creeley <brett.creeley@amd.com> Link: https://patch.msgid.link/20250912141426.3922545-1-alok.a.tiwari@oracle.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-09-11net: ionic: Provide doorbell and CMB region informationAbhijit Gangurde
The RDMA device needs information of controller memory bar and doorbell capability to share with user context. Discover CMB regions and express doorbell capabilities on device init. Reviewed-by: Shannon Nelson <shannon.nelson@amd.com> Co-developed-by: Pablo Cascón <pablo.cascon@amd.com> Signed-off-by: Pablo Cascón <pablo.cascon@amd.com> Co-developed-by: Allen Hubbe <allen.hubbe@amd.com> Signed-off-by: Allen Hubbe <allen.hubbe@amd.com> Signed-off-by: Abhijit Gangurde <abhijit.gangurde@amd.com> Link: https://patch.msgid.link/20250903061606.4139957-7-abhijit.gangurde@amd.com Signed-off-by: Leon Romanovsky <leon@kernel.org>
2025-09-11net: ionic: Provide interrupt allocation support for the RDMA driverAbhijit Gangurde
RDMA driver needs an interrupt for an event queue. Export function from net driver to allocate an interrupt. Reviewed-by: Shannon Nelson <shannon.nelson@amd.com> Signed-off-by: Abhijit Gangurde <abhijit.gangurde@amd.com> Link: https://patch.msgid.link/20250903061606.4139957-6-abhijit.gangurde@amd.com Signed-off-by: Leon Romanovsky <leon@kernel.org>
2025-09-11net: ionic: Provide RDMA reset support for the RDMA driverAbhijit Gangurde
The Ethernet driver holds the privilege to execute the device commands. Export the function to execute RDMA reset command for use by RDMA driver. Reviewed-by: Shannon Nelson <shannon.nelson@amd.com> Signed-off-by: Abhijit Gangurde <abhijit.gangurde@amd.com> Link: https://patch.msgid.link/20250903061606.4139957-5-abhijit.gangurde@amd.com Signed-off-by: Leon Romanovsky <leon@kernel.org>
2025-09-11net: ionic: Export the APIs from net driver to support device commandsAbhijit Gangurde
RDMA driver needs to establish admin queues to support admin operations. Export the APIs to send device commands for the RDMA driver. Reviewed-by: Shannon Nelson <shannon.nelson@amd.com> Signed-off-by: Abhijit Gangurde <abhijit.gangurde@amd.com> Link: https://patch.msgid.link/20250903061606.4139957-4-abhijit.gangurde@amd.com Signed-off-by: Leon Romanovsky <leon@kernel.org>
2025-09-11net: ionic: Update LIF identity with additional RDMA capabilitiesAbhijit Gangurde
Firmware sends the RDMA capability in a response for LIF_IDENTIFY device command. Update the LIF indentify with additional RDMA capabilities used by driver and firmware. Reviewed-by: Shannon Nelson <shannon.nelson@amd.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Abhijit Gangurde <abhijit.gangurde@amd.com> Link: https://patch.msgid.link/20250903061606.4139957-3-abhijit.gangurde@amd.com Signed-off-by: Leon Romanovsky <leon@kernel.org>
2025-09-11net: ionic: Create an auxiliary device for rdma driverAbhijit Gangurde
To support RDMA capable ethernet device, create an auxiliary device in the ionic Ethernet driver. The RDMA device is modeled as an auxiliary device to the Ethernet device. Reviewed-by: Shannon Nelson <shannon.nelson@amd.com> Signed-off-by: Abhijit Gangurde <abhijit.gangurde@amd.com> Link: https://patch.msgid.link/20250903061606.4139957-2-abhijit.gangurde@amd.com Signed-off-by: Leon Romanovsky <leon@kernel.org>
2025-07-30Merge tag 'net-next-6.17' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core & protocols: - Wrap datapath globals into net_aligned_data, to avoid false sharing - Preserve MSG_ZEROCOPY in forwarding (e.g. out of a container) - Add SO_INQ and SCM_INQ support to AF_UNIX - Add SIOCINQ support to AF_VSOCK - Add TCP_MAXSEG sockopt to MPTCP - Add IPv6 force_forwarding sysctl to enable forwarding per interface - Make TCP validation of whether packet fully fits in the receive window and the rcv_buf more strict. With increased use of HW aggregation a single "packet" can be multiple 100s of kB - Add MSG_MORE flag to optimize large TCP transmissions via sockmap, improves latency up to 33% for sockmap users - Convert TCP send queue handling from tasklet to BH workque - Improve BPF iteration over TCP sockets to see each socket exactly once - Remove obsolete and unused TCP RFC3517/RFC6675 loss recovery code - Support enabling kernel threads for NAPI processing on per-NAPI instance basis rather than a whole device. Fully stop the kernel NAPI thread when threaded NAPI gets disabled. Previously thread would stick around until ifdown due to tricky synchronization - Allow multicast routing to take effect on locally-generated packets - Add output interface argument for End.X in segment routing - MCTP: add support for gateway routing, improve bind() handling - Don't require rtnl_lock when fetching an IPv6 neighbor over Netlink - Add a new neighbor flag ("extern_valid"), which cedes refresh responsibilities to userspace. This is needed for EVPN multi-homing where a neighbor entry for a multi-homed host needs to be synced across all the VTEPs among which the host is multi-homed - Support NUD_PERMANENT for proxy neighbor entries - Add a new queuing discipline for IETF RFC9332 DualQ Coupled AQM - Add sequence numbers to netconsole messages. Unregister netconsole's console when all net targets are removed. Code refactoring. Add a number of selftests - Align IPSec inbound SA lookup to RFC 4301. Only SPI and protocol should be used for an inbound SA lookup - Support inspecting ref_tracker state via DebugFS - Don't force bonding advertisement frames tx to ~333 ms boundaries. Add broadcast_neighbor option to send ARP/ND on all bonded links - Allow providing upcall pid for the 'execute' command in openvswitch - Remove DCCP support from Netfilter's conntrack - Disallow multiple packet duplications in the queuing layer - Prevent use of deprecated iptables code on PREEMPT_RT Driver API: - Support RSS and hashing configuration over ethtool Netlink - Add dedicated ethtool callbacks for getting and setting hashing fields - Add support for power budget evaluation strategy in PSE / Power-over-Ethernet. Generate Netlink events for overcurrent etc - Support DPLL phase offset monitoring across all device inputs. Support providing clock reference and SYNC over separate DPLL inputs - Support traffic classes in devlink rate API for bandwidth management - Remove rtnl_lock dependency from UDP tunnel port configuration Device drivers: - Add a new Broadcom driver for 800G Ethernet (bnge) - Add a standalone driver for Microchip ZL3073x DPLL - Remove IBM's NETIUCV device driver - Ethernet high-speed NICs: - Broadcom (bnxt): - support zero-copy Tx of DMABUF memory - take page size into account for page pool recycling rings - Intel (100G, ice, idpf): - idpf: XDP and AF_XDP support preparations - idpf: add flow steering - add link_down_events statistic - clean up the TSPLL code - preparations for live VM migration - nVidia/Mellanox: - support zero-copy Rx/Tx interfaces (DMABUF and io_uring) - optimize context memory usage for matchers - expose serial numbers in devlink info - support PCIe congestion metrics - Meta (fbnic): - add 25G, 50G, and 100G link modes to phylink - support dumping FW logs - Marvell/Cavium: - support for CN20K generation of the Octeon chips - Amazon: - add HW clock (without timestamping, just hypervisor time access) - Ethernet virtual: - VirtIO net: - support segmentation of UDP-tunnel-encapsulated packets - Google (gve): - support packet timestamping and clock synchronization - Microsoft vNIC: - add handler for device-originated servicing events - allow dynamic MSI-X vector allocation - support Tx bandwidth clamping - Ethernet NICs consumer, and embedded: - AMD: - amd-xgbe: hardware timestamping and PTP clock support - Broadcom integrated MACs (bcmgenet, bcmasp): - use napi_complete_done() return value to support NAPI polling - add support for re-starting auto-negotiation - Broadcom switches (b53): - support BCM5325 switches - add bcm63xx EPHY power control - Synopsys (stmmac): - lots of code refactoring and cleanups - TI: - icssg-prueth: read firmware-names from device tree - icssg: PRP offload support - Microchip: - lan78xx: convert to PHYLINK for improved PHY and MAC management - ksz: add KSZ8463 switch support - Intel: - support similar queue priority scheme in multi-queue and time-sensitive networking (taprio) - support packet pre-emption in both - RealTek (r8169): - enable EEE at 5Gbps on RTL8126 - Airoha: - add PPPoE offload support - MDIO bus controller for Airoha AN7583 - Ethernet PHYs: - support for the IPQ5018 internal GE PHY - micrel KSZ9477 switch-integrated PHYs: - add MDI/MDI-X control support - add RX error counters - add cable test support - add Signal Quality Indicator (SQI) reporting - dp83tg720: improve reset handling and reduce link recovery time - support bcm54811 (and its MII-Lite interface type) - air_en8811h: support resume/suspend - support PHY counters for QCA807x and QCA808x - support WoL for QCA807x - CAN drivers: - rcar_canfd: support for Transceiver Delay Compensation - kvaser: report FW versions via devlink dev info - WiFi: - extended regulatory info support (6 GHz) - add statistics and beacon monitor for Multi-Link Operation (MLO) - support S1G aggregation, improve S1G support - add Radio Measurement action fields - support per-radio RTS threshold - some work around how FIPS affects wifi, which was wrong (RC4 is used by TKIP, not only WEP) - improvements for unsolicited probe response handling - WiFi drivers: - RealTek (rtw88): - IBSS mode for SDIO devices - RealTek (rtw89): - BT coexistence for MLO/WiFi7 - concurrent station + P2P support - support for USB devices RTL8851BU/RTL8852BU - Intel (iwlwifi): - use embedded PNVM in (to be released) FW images to fix compatibility issues - many cleanups (unused FW APIs, PCIe code, WoWLAN) - some FIPS interoperability - MediaTek (mt76): - firmware recovery improvements - more MLO work - Qualcomm/Atheros (ath12k): - fix scan on multi-radio devices - more EHT/Wi-Fi 7 features - encapsulation/decapsulation offload - Broadcom (brcm80211): - support SDIO 43751 device - Bluetooth: - hci_event: add support for handling LE BIG Sync Lost event - ISO: add socket option to report packet seqnum via CMSG - ISO: support SCM_TIMESTAMPING for ISO TS - Bluetooth drivers: - intel_pcie: support Function Level Reset - nxpuart: add support for 4M baudrate - nxpuart: implement powerup sequence, reset, FW dump, and FW loading" * tag 'net-next-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1742 commits) dpll: zl3073x: Fix build failure selftests: bpf: fix legacy netfilter options ipv6: annotate data-races around rt->fib6_nsiblings ipv6: fix possible infinite loop in fib6_info_uses_dev() ipv6: prevent infinite loop in rt6_nlmsg_size() ipv6: add a retry logic in net6_rt_notify() vrf: Drop existing dst reference in vrf_ip6_input_dst net/sched: taprio: align entry index attr validation with mqprio net: fsl_pq_mdio: use dev_err_probe selftests: rtnetlink.sh: remove esp4_offload after test vsock: remove unnecessary null check in vsock_getname() igb: xsk: solve negative overflow of nb_pkts in zerocopy mode stmmac: xsk: fix negative overflow of budget in zerocopy mode dt-bindings: ieee802154: Convert at86rf230.txt yaml format net: dsa: microchip: Disable PTP function of KSZ8463 net: dsa: microchip: Setup fiber ports for KSZ8463 net: dsa: microchip: Write switch MAC address differently for KSZ8463 net: dsa: microchip: Use different registers for KSZ8463 net: dsa: microchip: Add KSZ8463 switch support to KSZ DSA driver dt-bindings: net: dsa: microchip: Add KSZ8463 switch support ...
2025-07-25net: Fix typosBjorn Helgaas
Fix typos in comments and error messages. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: David Arinzon <darinzon@amazon.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250723201528.2908218-1-helgaas@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-01time/timecounter: Fix the lie that struct cyclecounter is constGreg Kroah-Hartman
In both the read callback for struct cyclecounter, and in struct timecounter, struct cyclecounter is declared as a const pointer. Unfortunatly, a number of users of this pointer treat it as a non-const pointer as it is burried in a larger structure that is heavily modified by the callback function when accessed. This lie had been hidden by the fact that container_of() "casts away" a const attribute of a pointer without any compiler warning happening at all. Fix this all up by removing the const attribute in the needed places so that everyone can see that the structure really isn't const, but can, and is, modified by the users of it. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/all/2025070124-backyard-hurt-783a@gregkh
2025-06-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR (net-6.16-rc4). Conflicts: Documentation/netlink/specs/mptcp_pm.yaml 9e6dd4c256d0 ("netlink: specs: mptcp: replace underscores with dashes in names") ec362192aa9e ("netlink: specs: fix up indentation errors") https://lore.kernel.org/20250626122205.389c2cd4@canb.auug.org.au Adjacent changes: Documentation/netlink/specs/fou.yaml 791a9ed0a40d ("netlink: specs: fou: replace underscores with dashes in names") 880d43ca9aa4 ("netlink: specs: clean up spaces in brackets") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-23ethernet: ionic: Fix DMA mapping testsThomas Fourier
Change error values of `ionic_tx_map_single()` and `ionic_tx_map_frag()` from 0 to `DMA_MAPPING_ERROR` to prevent collision with 0 as a valid address. This also fixes the use of `dma_mapping_error()` to test against 0 in `ionic_xdp_post_frame()` Fixes: 0f3154e6bcb3 ("ionic: Add Tx and Rx handling") Fixes: 56e41ee12d2d ("ionic: better dma-map error handling") Fixes: ac8813c0ab7d ("ionic: convert Rx queue buffers to use page_pool") Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com> Reviewed-by: Brett Creeley <brett.creeley@amd.com> Link: https://patch.msgid.link/20250619094538.283723-2-fourier.thomas@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR (net-6.16-rc3). No conflicts or adjacent changes. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-13ionic: cancel delayed work earlier in removeShannon Nelson
Cancel any entries on the delayed work queue before starting to tear down the lif to be sure there is no race with any other events. Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Joe Damato <joe@dama.to> Signed-off-by: David S. Miller <davem@davemloft.net>
2025-06-13ionic: clean dbpage in de-initShannon Nelson
Since the kern_dbpage gets set up in ionic_lif_init() and that function's error path will clean it if needed, the kern_dbpage on teardown should be cleaned in ionic_lif_deinit(), not in ionic_lif_free(). As it is currently we get a double call to iounmap() on kern_dbpage if the PCI ionic fails setting up the lif. One example of this is when firmware isn't responding to AdminQ requests and ionic's first AdminQ call fails to setup the NotifyQ. Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Joe Damato <joe@dama.to> Signed-off-by: David S. Miller <davem@davemloft.net>
2025-06-13ionic: print firmware heartbeat as unsignedShannon Nelson
The firmware heartbeat value is an unsigned number, and seeing a negative number when it gets big is a little disconcerting. Example: ionic 0000:24:00.0: FW heartbeat stalled at -1342169688 Print using the unsigned flag. Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Joe Damato <joe@dama.to> Signed-off-by: David S. Miller <davem@davemloft.net>
2025-06-12ionic: Prevent driver/fw getting out of sync on devcmd(s)Brett Creeley
Some stress/negative firmware testing around devcmd(s) returning EAGAIN found that the done bit could get out of sync in the firmware when it wasn't cleared in a retry case. While here, change the type of the local done variable to a bool to match the return type from ionic_dev_cmd_done(). Fixes: ec8ee714736e ("ionic: stretch heartbeat detection") Signed-off-by: Brett Creeley <brett.creeley@amd.com> Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250609212827.53842-1-shannon.nelson@amd.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-08treewide, timers: Rename from_timer() to timer_container_of()Ingo Molnar
Move this API to the canonical timer_*() namespace. [ tglx: Redone against pre rc1 ] Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/all/aB2X0jCKQO56WdMt@gmail.com
2025-04-22ionic: add module eeprom channel data to ionic_if and ethtoolShannon Nelson
Make the CMIS module type's page 17 channel data available for ethtool to request. As done previously, carve space for this data from the port_info reserved space. In the future, if additional pages are needed, a new firmware AdminQ command will be added for accessing random pages. Reviewed-by: Brett Creeley <brett.creeley@amd.com> Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250415231317.40616-4-shannon.nelson@amd.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-04-22ionic: support ethtool get_module_eeprom_by_pageShannon Nelson
Add support for the newer get_module_eeprom_by_page interface. Only the upper half of the 256 byte page is available for reading, and the firmware puts the two sections into the extended sprom buffer, so a union is used over the extended sprom buffer to make clear which page is to be accessed. With get_module_eeprom_by_page implemented there is no need for the older get_module_info or git_module_eeprom interfaces, so remove them. Reviewed-by: Brett Creeley <brett.creeley@amd.com> Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250415231317.40616-3-shannon.nelson@amd.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-04-22ionic: extend the QSFP module sprom for more pagesShannon Nelson
Some QSFP modules have more eeprom to be read by ethtool than the initial high and low page 0 that is currently available in the DSC's ionic sprom[] buffer. Since the current sprom[] is baked into the middle of an existing API struct, to make the high end of page 1 and page 2 available a block is carved from a reserved space of the existing port_info struct and the ionic_get_module_eeprom() service is taught how to get there. Newer firmware writes the additional QSFP page info here, yet this remains backward compatible because older firmware sets this space to all 0 and older ionic drivers do not use the reserved space. Reviewed-by: Brett Creeley <brett.creeley@amd.com> Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250415231317.40616-2-shannon.nelson@amd.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-04-05treewide: Switch/rename to timer_delete[_sync]()Thomas Gleixner
timer_delete[_sync]() replaces del_timer[_sync](). Convert the whole tree over and remove the historical wrapper inlines. Conversion was done with coccinelle plus manual fixups where necessary. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2024-12-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR (net-6.13-rc4). No conflicts. Adjacent changes: drivers/net/ethernet/renesas/rswitch.h 32fd46f5b69e ("net: renesas: rswitch: remove speed from gwca structure") 922b4b955a03 ("net: renesas: rswitch: rework ts tags management") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-15ionic: use ee->offset when returning sprom dataShannon Nelson
Some calls into ionic_get_module_eeprom() don't use a single full buffer size, but instead multiple calls with an offset. Teach our driver to use the offset correctly so we can respond appropriately to the caller. Fixes: 4d03e00a2140 ("ionic: Add initial ethtool support") Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20241212213157.12212-4-shannon.nelson@amd.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-15ionic: no double destroy workqueueShannon Nelson
There are some FW error handling paths that can cause us to try to destroy the workqueue more than once, so let's be sure we're checking for that. The case where this popped up was in an AER event where the handlers got called in such a way that ionic_reset_prepare() and thus ionic_dev_teardown() got called twice in a row. The second time through the workqueue was already destroyed, and destroy_workqueue() choked on the bad wq pointer. We didn't hit this in AER handler testing before because at that time we weren't using a private workqueue. Later we replaced the use of the system workqueue with our own private workqueue but hadn't rerun the AER handler testing since then. Fixes: 9e25450da700 ("ionic: add private workqueue per-device") Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20241212213157.12212-3-shannon.nelson@amd.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-15ionic: Fix netdev notifier unregister on failureBrett Creeley
If register_netdev() fails, then the driver leaks the netdev notifier. Fix this by calling ionic_lif_unregister() on register_netdev() failure. This will also call ionic_lif_unregister_phc() if it has already been registered. Fixes: 30b87ab4c0b3 ("ionic: remove lif list concept") Signed-off-by: Brett Creeley <brett.creeley@amd.com> Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20241212213157.12212-2-shannon.nelson@amd.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-15ionic: remove the unused nb_workBrett Creeley
Remove the empty and unused nb_work and associated ionic_lif_notify_work() function. v2: separated from previous net patch Link: https://lore.kernel.org/netdev/20241210174828.69525-2-shannon.nelson@amd.com/ Signed-off-by: Brett Creeley <brett.creeley@amd.com> Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Link: https://patch.msgid.link/20241212212042.9348-1-shannon.nelson@amd.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-12ionic: add support for QSFP_PLUS_CMISShannon Nelson
Teach the driver to recognize and decode the sfp pid SFF8024_ID_QSFP_PLUS_CMIS correctly. Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-12-12ionic: add speed defines for 200G and 400GShannon Nelson
Add higher speed defines to the ionic_if.h API and decode them in the ethtool get_link_ksettings callback. Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-12-12ionic: Translate IONIC_RC_ENOSUPP to EOPNOTSUPPBrett Creeley
Instead of reporting -EINVAL when IONIC_RC_ENOSUPP is returned use the -EOPNOTSUPP value. This aligns better since the FW only returns IONIC_RC_ENOSUPP when operations aren't supported not when invalid values are used. Signed-off-by: Brett Creeley <brett.creeley@amd.com> Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-12-12ionic: Use VLAN_ETH_HLEN when possibleBrett Creeley
Replace when ETH_HLEN and VLAN_HLEN are used together with VLAN_ETH_HLEN since it's the same value and uses 1 define instead of 2. Signed-off-by: Brett Creeley <brett.creeley@amd.com> Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-12-12ionic: add asic codes to firmware interface fileShannon Nelson
Now that the firmware has learned how to properly report the asic type id, add the values to our interface file. The sharp-eyed reviewers will catch that the CAPRI value changed here from 0 to 1. This comes with the FW actually defining it correctly. This is safe for us to change as nothing actually uses that value yet. Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-11-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR (net-6.12-rc7). Conflicts: drivers/net/ethernet/freescale/enetc/enetc_pf.c e15c5506dd39 ("net: enetc: allocate vf_state during PF probes") 3774409fd4c6 ("net: enetc: build enetc_pf_common.c as a separate module") https://lore.kernel.org/20241105114100.118bd35e@canb.auug.org.au Adjacent changes: drivers/net/ethernet/ti/am65-cpsw-nuss.c de794169cf17 ("net: ethernet: ti: am65-cpsw: Fix multi queue Rx on J7") 4a7b2ba94a59 ("net: ethernet: ti: am65-cpsw: Use tstats instead of open coded version") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-07drivers: net: ionic: add missed debugfs cleanup to ionic_probe() error pathWentao Liang
The ionic_setup_one() creates a debugfs entry for ionic upon successful execution. However, the ionic_probe() does not release the dentry before returning, resulting in a memory leak. To fix this bug, we add the ionic_debugfs_del_dev() to release the resources in a timely manner before returning. Fixes: 0de38d9f1dba ("ionic: extract common bits from ionic_probe") Signed-off-by: Wentao Liang <Wentao_liang_g@163.com> Acked-by: Shannon Nelson <shannon.nelson@amd.com> Link: https://patch.msgid.link/20241107021756.1677-1-liangwentao@iscas.ac.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-03dim: pass dim_sample to net_dim() by referenceCaleb Sander Mateos
net_dim() is currently passed a struct dim_sample argument by value. struct dim_sample is 24 bytes. Since this is greater 16 bytes, x86-64 passes it on the stack. All callers have already initialized dim_sample on the stack, so passing it by value requires pushing a duplicated copy to the stack. Either witing to the stack and immediately reading it, or perhaps dereferencing addresses relative to the stack pointer in a chain of push instructions, seems to perform quite poorly. In a heavy TCP workload, mlx5e_handle_rx_dim() consumes 3% of CPU time, 94% of which is attributed to the first push instruction to copy dim_sample on the stack for the call to net_dim(): // Call ktime_get() 0.26 |4ead2: call 4ead7 <mlx5e_handle_rx_dim+0x47> // Pass the address of struct dim in %rdi |4ead7: lea 0x3d0(%rbx),%rdi // Set dim_sample.pkt_ctr |4eade: mov %r13d,0x8(%rsp) // Set dim_sample.byte_ctr |4eae3: mov %r12d,0xc(%rsp) // Set dim_sample.event_ctr 0.15 |4eae8: mov %bp,0x10(%rsp) // Duplicate dim_sample on the stack 94.16 |4eaed: push 0x10(%rsp) 2.79 |4eaf1: push 0x10(%rsp) 0.07 |4eaf5: push %rax // Call net_dim() 0.21 |4eaf6: call 4eafb <mlx5e_handle_rx_dim+0x6b> To allow the caller to reuse the struct dim_sample already on the stack, pass the struct dim_sample by reference to net_dim(). Signed-off-by: Caleb Sander Mateos <csander@purestorage.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Shannon Nelson <shannon.nelson@amd.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by: Arthur Kiyanovski <akiyano@amazon.com> Reviewed-by: Louis Peens <louis.peens@corigine.com> Link: https://patch.msgid.link/20241031002326.3426181-2-csander@purestorage.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-09ionic: Allow XDP program to be hot swappedBrett Creeley
Using examples of other driver(s), add the ability to hot-swap an XDP program without having to reconfigure the queues. To prevent the q->xdp_prog to be read/written more than once use READ_ONCE() and WRITE_ONCE() on the q->xdp_prog. The q->xdp_prog was being checked in multiple different for loops in the hot path. The change to allow xdp_prog hot swapping created the possibility for many READ_ONCE(q->xdp_prog) calls during a single napi callback. Refactor the Rx napi handling to allow a previous READ_ONCE(q->xdp_prog) (or NULL for hwstamp_rxq) to be passed into the relevant functions. Also, move other Rx related hotpath handling into the newly created ionic_rx_cq_service() function to reduce the scope of the xdp_prog local variable and put all Rx handling in one function similar to Tx. Signed-off-by: Brett Creeley <brett.creeley@amd.com> Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Link: https://patch.msgid.link/20240906232623.39651-8-brett.creeley@amd.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-09ionic: convert Rx queue buffers to use page_poolShannon Nelson
Our home-grown buffer management needs to go away and we need to be playing nicely with the page_pool infrastructure. This converts the Rx traffic queues to use page_pool. Also, since ionic_rx_buf_size() was removed, redefine IONIC_PAGE_SIZE to account for IONIC_MAX_BUF_LEN being the largest allowed buffer to prevent overflowing u16 variables, which could happen when PAGE_SIZE is defined as >= 64KB. include/linux/minmax.h:93:37: warning: conversion from 'long unsigned int' to 'u16' {aka 'short unsigned int'} changes value from '65536' to '0' [-Woverflow] Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Signed-off-by: Brett Creeley <brett.creeley@amd.com> Link: https://patch.msgid.link/20240906232623.39651-7-brett.creeley@amd.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-09ionic: Fully reconfigure queues when going to/from a NULL XDP programBrett Creeley
Currently when going to/from a NULL XDP program the driver uses ionic_stop_queues_reconfig() and then ionic_start_queues_reconfig() in order to re-register the xdp_rxq_info and re-init the queues. This is fine until page_pool(s) are used in an upcoming patch. In preparation for adding page_pool support make sure to completely rebuild the queues when going to/from a NULL XDP program. Without this change the call to mem_allocator_disconnect() never happens when going to a NULL XDP program, which eventually results in xdp_rxq_info_reg_mem_model() failing with -ENOSPC due to the mem_id_pool ida having no remaining space. Signed-off-by: Brett Creeley <brett.creeley@amd.com> Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Link: https://patch.msgid.link/20240906232623.39651-6-brett.creeley@amd.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-09ionic: always use rxq_infoShannon Nelson
Instead of setting up and tearing down the rxq_info only when the XDP program is loaded or unloaded, we will build the rxq_info whether or not XDP is in use. This is the more common use pattern and better supports future conversion to page_pool. Since the rxq_info wants the napi_id we re-order things slightly to tie this into the queue init and deinit functions where we do the add and delete of napi. Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Signed-off-by: Brett Creeley <brett.creeley@amd.com> Link: https://patch.msgid.link/20240906232623.39651-5-brett.creeley@amd.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-09ionic: use per-queue xdp_progShannon Nelson
We originally were using a per-interface xdp_prog variable to track a loaded XDP program since we knew there would never be support for a per-queue XDP program. With that, we only built the per queue rxq_info struct when an XDP program was loaded and removed it on XDP program unload, and used the pointer as an indicator in the Rx hotpath to know to how build the buffers. However, that's really not the model generally used, and makes a conversion to page_pool Rx buffer cacheing a little problematic. This patch converts the driver to use the more common approach of using a per-queue xdp_prog pointer to work out buffer allocations and need for bpf_prog_run_xdp(). We jostle a couple of fields in the queue struct in order to keep the new xdp_prog pointer in a warm cacheline. Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Signed-off-by: Brett Creeley <brett.creeley@amd.com> Link: https://patch.msgid.link/20240906232623.39651-4-brett.creeley@amd.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-09ionic: rename ionic_xdp_rx_put_bufsShannon Nelson
We aren't "putting" buf, we're just unlinking them from our tracking in order to let the XDP_TX and XDP_REDIRECT tx clean paths take care of the pages when they are done with them. This rename clears up the intent. Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Signed-off-by: Brett Creeley <brett.creeley@amd.com> Link: https://patch.msgid.link/20240906232623.39651-3-brett.creeley@amd.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-09ionic: debug line for Tx completion errorsShannon Nelson
Here's a little debugging aid in case the device starts throwing Tx completion errors. Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Signed-off-by: Brett Creeley <brett.creeley@amd.com> Link: https://patch.msgid.link/20240906232623.39651-2-brett.creeley@amd.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-06ionic: Convert comma to semicolonChen Ni
Replace comma between expressions with semicolons. Using a ',' in place of a ';' can have unintended side effects. Although that is not the case here, it is seems best to use ';' unless ',' is intended. Found by inspection. No functional change intended. Compile tested only. Signed-off-by: Chen Ni <nichen@iscas.ac.cn> Reviewed-by: Shannon Nelson <shannon.nelson@amd.com> Link: https://patch.msgid.link/20240904081728.1353260-1-nichen@iscas.ac.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-04ionic: Remove redundant null pointer checks in ionic_debugfs_add_qcq()Li Zetao
Since the debugfs_create_dir() never returns a null pointer, checking the return value for a null pointer is redundant, and using IS_ERR is safe enough. Signed-off-by: Li Zetao <lizetao1@huawei.com> Link: https://patch.msgid.link/20240903143149.2004530-1-lizetao1@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-03ionic: Remove setting of RX software timestampGal Pressman
The responsibility for reporting of RX software timestamp has moved to the core layer (see __ethtool_get_ts_info()), remove usage from the device drivers. Reviewed-by: Carolina Jubran <cjubran@nvidia.com> Reviewed-by: Rahul Rameshbabu <rrameshbabu@nvidia.com> Signed-off-by: Gal Pressman <gal@nvidia.com> Reviewed-by: Shannon Nelson <shannon.nelson@amd.com> Reviewed-by: Brett Creeley <brett.creeley@amd.com> Link: https://patch.msgid.link/20240901112803.212753-7-gal@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit v1.2.3 (git 2.0.4) at 2025-12-28 17:49:57 +0000