summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/ti
AgeCommit message (Collapse)Author
2022-05-12net: cpsw: add missing of_node_put() in cpsw_probe_dt()Yang Yingliang
commit 95098d5ac2551769807031444e55a0da5d4f0952 upstream. 'tmp_node' need be put before returning from cpsw_probe_dt(), so add missing of_node_put() in error path. Fixes: ed3525eda4c4 ("net: ethernet: ti: introduce cpsw switchdev based driver part 1 - dual-emac") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-03-16net: ethernet: ti: cpts: Handle error for clk_enableJiasheng Jiang
[ Upstream commit 6babfc6e6fab068018c36e8f6605184b8c0b349d ] As the potential failure of the clk_enable(), it should be better to check it and return error if fails. Fixes: 8a2c9a5ab4b9 ("net: ethernet: ti: cpts: rework initialization/deinitialization") Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-02-01net: cpsw: Properly initialise struct page_pool_paramsToke Høiland-Jørgensen
[ Upstream commit c63003e3d99761afb280add3b30de1cf30fa522b ] The cpsw driver didn't properly initialise the struct page_pool_params before calling page_pool_create(), which leads to crashes after the struct has been expanded with new parameters. The second Fixes tag below is where the buggy code was introduced, but because the code was moved around this patch will only apply on top of the commit in the first Fixes tag. Fixes: c5013ac1dd0e ("net: ethernet: ti: cpsw: move set of common functions in cpsw_priv") Fixes: 9ed4050c0d75 ("net: ethernet: ti: cpsw: add XDP support") Reported-by: Colin Foster <colin.foster@in-advantage.com> Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Tested-by: Colin Foster <colin.foster@in-advantage.com> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-18net: davinci_emac: Fix interrupt pacing disableMaxim Kiselev
[ Upstream commit d52bcb47bdf971a59a2467975d2405fcfcb2fa19 ] This patch allows to use 0 for `coal->rx_coalesce_usecs` param to disable rx irq coalescing. Previously we could enable rx irq coalescing via ethtool (For ex: `ethtool -C eth0 rx-usecs 2000`) but we couldn't disable it because this part rejects 0 value: if (!coal->rx_coalesce_usecs) return -EINVAL; Fixes: 84da2658a619 ("TI DaVinci EMAC : Implement interrupt pacing functionality.") Signed-off-by: Maxim Kiselev <bigunclemax@gmail.com> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Link: https://lore.kernel.org/r/20211101152343.4193233-1-bigunclemax@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-18net: ethernet: ti: cpsw: fix min eth packet size for non-switch use-casesGrygorii Strashko
commit acc68b8d2a1196c4db806947606f162dbeed2274 upstream. The CPSW switchdev driver inherited fix from commit 9421c9015047 ("net: ethernet: ti: cpsw: fix min eth packet size") which changes min TX packet size to 64bytes (VLAN_ETH_ZLEN, excluding ETH_FCS). It was done to fix HW packed drop issue when packets are sent from Host to the port with PVID and un-tagging enabled. Unfortunately this breaks some other non-switch specific use-cases, like: - [1] CPSW port as DSA CPU port with DSA-tag applied at the end of the packet - [2] Some industrial protocols, which expects min TX packet size 60Bytes (excluding FCS). Fix it by configuring min TX packet size depending on driver mode - 60Bytes (ETH_ZLEN) for multi mac (dual-mac) mode - 64Bytes (VLAN_ETH_ZLEN) for switch mode and update it during driver mode change and annotate with READ_ONCE()/WRITE_ONCE() as it can be read by napi while writing. [1] https://lore.kernel.org/netdev/20210531124051.GA15218@cephalopod/ [2] https://e2e.ti.com/support/arm/sitara_arm/f/791/t/701669 Cc: stable@vger.kernel.org Fixes: ed3525eda4c4 ("net: ethernet: ti: introduce cpsw switchdev based driver part 1 - dual-emac") Reported-by: Ben Hutchings <ben.hutchings@essensium.com> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-25net: ti: fix UAF in tlan_remove_onePavel Skripkin
commit 0336f8ffece62f882ab3012820965a786a983f70 upstream. priv is netdev private data and it cannot be used after free_netdev() call. Using priv after free_netdev() can cause UAF bug. Fix it by moving free_netdev() at the end of the function. Fixes: 1e0a8b13d355 ("tlan: cancel work at remove path") Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-14net: ti: am65-cpsw-nuss: Fix crash when changing number of TX queuesVignesh Raghavendra
[ Upstream commit ce8eb4c728ef40b554b4f3d8963f11ed44502e00 ] When changing number of TX queues using ethtool: # ethtool -L eth0 tx 1 [ 135.301047] Unable to handle kernel paging request at virtual address 00000000af5d0000 [...] [ 135.525128] Call trace: [ 135.525142] dma_release_from_dev_coherent+0x2c/0xb0 [ 135.525148] dma_free_attrs+0x54/0xe0 [ 135.525156] k3_cppi_desc_pool_destroy+0x50/0xa0 [ 135.525164] am65_cpsw_nuss_remove_tx_chns+0x88/0xdc [ 135.525171] am65_cpsw_set_channels+0x3c/0x70 [...] This is because k3_cppi_desc_pool_destroy() which is called after k3_udma_glue_release_tx_chn() in am65_cpsw_nuss_remove_tx_chns() references struct device that is unregistered at the end of k3_udma_glue_release_tx_chn() Therefore the right order is to call k3_cppi_desc_pool_destroy() and destroy desc pool before calling k3_udma_glue_release_tx_chn(). Fix this throughout the driver. Fixes: 93a76530316a ("net: ethernet: ti: introduce am65x/j721e gigabit eth subsystem driver") Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-06-03net: netcp: Fix an error messageChristophe JAILLET
[ Upstream commit ddb6e00f8413e885ff826e32521cff7924661de0 ] 'ret' is known to be 0 here. The expected error code is stored in 'tx_pipe->dma_queue', so use it instead. While at it, switch from %d to %pe which is more user friendly. Fixes: 84640e27f230 ("net: netcp: Add Keystone NetCP core ethernet driver") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-05-14net: davinci_emac: Fix incorrect masking of tx and rx error channelColin Ian King
[ Upstream commit d83b8aa5207d81f9f6daec9888390f079cc5db3f ] The bit-masks used for the TXERRCH and RXERRCH (tx and rx error channels) are incorrect and always lead to a zero result. The mask values are currently the incorrect post-right shifted values, fix this by setting them to the currect values. (I double checked these against the TMS320TCI6482 data sheet, section 5.30, page 127 to ensure I had the correct mask values for the TXERRCH and RXERRCH fields in the MACSTATUS register). Addresses-Coverity: ("Operands don't affect result") Fixes: a6286ee630f6 ("net: Add TI DaVinci EMAC driver") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-01-12net: ethernet: ti: cpts: fix ethtool output when no ptp_clock registeredGrygorii Strashko
[ Upstream commit 4614792eebcbf81c60ad3604c1aeeb2b0899cea4 ] The CPTS driver registers PTP PHC clock when first netif is going up and unregister it when all netif are down. Now ethtool will show: - PTP PHC clock index 0 after boot until first netif is up; - the last assigned PTP PHC clock index even if PTP PHC clock is not registered any more after all netifs are down. This patch ensures that -1 is returned by ethtool when PTP PHC clock is not registered any more. Fixes: 8a2c9a5ab4b9 ("net: ethernet: ti: cpts: rework initialization/deinitialization") Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Link: https://lore.kernel.org/r/20201224162405.28032-1-grygorii.strashko@ti.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-09xdp: Remove the xdp_attachment_flags_ok() callbackToke Høiland-Jørgensen
Since commit 7f0a838254bd ("bpf, xdp: Maintain info on attached XDP BPF programs in net_device"), the XDP program attachment info is now maintained in the core code. This interacts badly with the xdp_attachment_flags_ok() check that prevents unloading an XDP program with different load flags than it was loaded with. In practice, two kinds of failures are seen: - An XDP program loaded without specifying a mode (and which then ends up in driver mode) cannot be unloaded if the program mode is specified on unload. - The dev_xdp_uninstall() hook always calls the driver callback with the mode set to the type of the program but an empty flags argument, which means the flags_ok() check prevents the program from being removed, leading to bpf prog reference leaks. The original reason this check was added was to avoid ambiguity when multiple programs were loaded. With the way the checks are done in the core now, this is quite simple to enforce in the core code, so let's add a check there and get rid of the xdp_attachment_flags_ok() callback entirely. Fixes: 7f0a838254bd ("bpf, xdp: Maintain info on attached XDP BPF programs in net_device") Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Jakub Kicinski <kuba@kernel.org> Link: https://lore.kernel.org/bpf/160752225751.110217.10267659521308669050.stgit@toke.dk
2020-11-16net: ethernet: ti: cpsw: fix error return code in cpsw_probe()Zhang Changzhong
Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Fixes: 83a8471ba255 ("net: ethernet: ti: cpsw: refactor probe to group common hw initialization") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com> Link: https://lore.kernel.org/r/1605250173-18438-1-git-send-email-zhangchangzhong@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-13net: ethernet: ti: am65-cpts: update ret when ptp_clock is ERRORWang Qing
We always have to update the value of ret, otherwise the error value may be the previous one. Fixes: f6bd59526ca5 ("net: ethernet: ti: introduce am654 common platform time sync driver") Signed-off-by: Wang Qing <wangqing@vivo.com> [grygorii.strashko@ti.com: fix build warn, subj add fixes tag] Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Link: https://lore.kernel.org/r/20201112164541.3223-1-grygorii.strashko@ti.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-13net: ethernet: ti: cpsw: fix cpts irq after suspendGrygorii Strashko
Depending on the SoC/platform the CPSW can completely lose context after a suspend/resume cycle, including CPSW wrapper (WR) which will cause reset of WR_C0_MISC_EN register, so CPTS IRQ will became disabled. Fix it by moving CPTS IRQ enabling in cpsw_ndo_open() where CPTS is actually started. Fixes: 84ea9c0a95d7 ("net: ethernet: ti: cpsw: enable cpts irq") Reported-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Tested-by: Tony Lindgren <tony@atomide.com> Link: https://lore.kernel.org/r/20201112111546.20343-1-grygorii.strashko@ti.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-02net: ethernet: ti: cpsw: disable PTPv1 hw timestamping advertisementGrygorii Strashko
The TI CPTS does not natively support PTPv1, only PTPv2. But, as it happens, the CPTS can provide HW timestamp for PTPv1 Sync messages, because CPTS HW parser looks for PTP messageType id in PTP message octet 0 which value is 0 for PTPv1. As result, CPTS HW can detect Sync messages for PTPv1 and PTPv2 (Sync messageType = 0 for both), but it fails for any other PTPv1 messages (Delay_req/resp) and will return PTP messageType id 0 for them. The commit e9523a5a32a1 ("net: ethernet: ti: cpsw: enable HWTSTAMP_FILTER_PTP_V1_L4_EVENT filter") added PTPv1 hw timestamping advertisement by mistake, only to make Linux Kernel "timestamping" utility work, and this causes issues with only PTPv1 compatible HW/SW - Sync HW timestamped, but Delay_req/resp are not. Hence, fix it disabling PTPv1 hw timestamping advertisement, so only PTPv1 compatible HW/SW can properly roll back to SW timestamping. Fixes: e9523a5a32a1 ("net: ethernet: ti: cpsw: enable HWTSTAMP_FILTER_PTP_V1_L4_EVENT filter") Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Link: https://lore.kernel.org/r/20201029190910.30789-1-grygorii.strashko@ti.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Minor conflicts in net/mptcp/protocol.h and tools/testing/selftests/net/Makefile. In both cases code was added on both sides in the same place so just keep both. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-09net: tlan: Fix typo abitraryNaoki Hayama
Fix comment typo. s/abitrary/arbitrary/ Signed-off-by: Naoki Hayama <naoki.hayama@lineo.co.jp> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-09-25drivers/net/ethernet: clean up mis-targeted commentsJesse Brandeburg
As part of the W=1 cleanups for ethernet, a million [*] driver comments had to be cleaned up to get the W=1 compilation to succeed. This change finally makes the drivers/net/ethernet tree compile with W=1 set on the command line. NOTE: The kernel uses kdoc style (see Documentation/process/kernel-doc.rst) when documenting code, not doxygen or other styles. After this patch the x86_64 build has no warnings from W=1, however scripts/kernel-doc says there are 1545 more warnings in source files, that I need to develop a script to fix in a followup patch. The errors fixed here are all kdoc of a few classes, with a few outliers: In file included from drivers/net/ethernet/qlogic/netxen/netxen_nic_hw.c:10: drivers/net/ethernet/qlogic/netxen/netxen_nic.h:1193:18: warning: ‘FW_DUMP_LEVELS’ defined but not used [-Wunused-const-variable=] 1193 | static const u32 FW_DUMP_LEVELS[] = { 0x3, 0x7, 0xf, 0x1f, 0x3f, 0x7f, 0xff }; | ^~~~~~~~~~~~~~ ... repeats 4 times... drivers/net/ethernet/sun/cassini.c:2084:24: warning: suggest braces around empty body in an ‘else’ statement [-Wempty-body] 2084 | RX_USED_ADD(page, i); drivers/net/ethernet/natsemi/ns83820.c: In function ‘phy_intr’: drivers/net/ethernet/natsemi/ns83820.c:603:6: warning: variable ‘tbisr’ set but not used [-Wunused-but-set-variable] 603 | u32 tbisr, tanar, tanlpar; | ^~~~~ drivers/net/ethernet/natsemi/ns83820.c: In function ‘ns83820_get_link_ksettings’: drivers/net/ethernet/natsemi/ns83820.c:1207:11: warning: variable ‘tanar’ set but not used [-Wunused-but-set-variable] 1207 | u32 cfg, tanar, tbicr; | ^~~~~ drivers/net/ethernet/packetengines/yellowfin.c:1063:18: warning: variable ‘yf_size’ set but not used [-Wunused-but-set-variable] 1063 | int data_size, yf_size; | ^~~~~~~ Normal kdoc fixes: warning: Function parameter or member 'x' not described in 'y' warning: Excess function parameter 'x' description in 'y' warning: Cannot understand <string> on line <NNN> - I thought it was a doc line [*] - ok it wasn't quite a million, but it felt like it. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-25drivers/net/ethernet: clean up unused assignmentsJesse Brandeburg
As part of the W=1 compliation series, these lines all created warnings about unused variables that were assigned a value. Most of them are from register reads, but some are just picking up a return value from a function and never doing anything with it. Fixed warnings: .../ethernet/brocade/bna/bnad.c:3280:6: warning: variable ‘rx_count’ set but not used [-Wunused-but-set-variable] .../ethernet/brocade/bna/bnad.c:3280:6: warning: variable ‘rx_count’ set but not used [-Wunused-but-set-variable] .../ethernet/cortina/gemini.c:512:6: warning: variable ‘val’ set but not used [-Wunused-but-set-variable] .../ethernet/cortina/gemini.c:2110:21: warning: variable ‘config0’ set but not used [-Wunused-but-set-variable] .../ethernet/cavium/liquidio/octeon_device.c:1327:6: warning: variable ‘val32’ set but not used [-Wunused-but-set-variable] .../ethernet/cavium/liquidio/octeon_device.c:1358:6: warning: variable ‘val32’ set but not used [-Wunused-but-set-variable] .../ethernet/dec/tulip/media.c:322:8: warning: variable ‘setup’ set but not used [-Wunused-but-set-variable] .../ethernet/dec/tulip/de4x5.c:4928:13: warning: variable ‘r3’ set but not used [-Wunused-but-set-variable] .../ethernet/micrel/ksz884x.c:1652:7: warning: variable ‘dummy’ set but not used [-Wunused-but-set-variable] .../ethernet/micrel/ksz884x.c:1652:7: warning: variable ‘dummy’ set but not used [-Wunused-but-set-variable] .../ethernet/micrel/ksz884x.c:1652:7: warning: variable ‘dummy’ set but not used [-Wunused-but-set-variable] .../ethernet/micrel/ksz884x.c:1652:7: warning: variable ‘dummy’ set but not used [-Wunused-but-set-variable] .../ethernet/micrel/ksz884x.c:4981:6: warning: variable ‘rx_status’ set but not used [-Wunused-but-set-variable] .../ethernet/micrel/ksz884x.c:6510:6: warning: variable ‘rc’ set but not used [-Wunused-but-set-variable] .../ethernet/micrel/ksz884x.c:6087: warning: cannot understand function prototype: 'struct hw_regs ' .../ethernet/microchip/lan743x_main.c:161:6: warning: variable ‘int_en’ set but not used [-Wunused-but-set-variable] .../ethernet/microchip/lan743x_main.c:1702:6: warning: variable ‘int_sts’ set but not used [-Wunused-but-set-variable] .../ethernet/microchip/lan743x_main.c:3041:6: warning: variable ‘ret’ set but not used [-Wunused-but-set-variable] .../ethernet/natsemi/ns83820.c:603:6: warning: variable ‘tbisr’ set but not used [-Wunused-but-set-variable] .../ethernet/natsemi/ns83820.c:1207:11: warning: variable ‘tanar’ set but not used [-Wunused-but-set-variable] .../ethernet/marvell/mvneta.c:754:6: warning: variable ‘dummy’ set but not used [-Wunused-but-set-variable] .../ethernet/neterion/vxge/vxge-traffic.c:33:6: warning: variable ‘val64’ set but not used [-Wunused-but-set-variable] .../ethernet/neterion/vxge/vxge-traffic.c:160:6: warning: variable ‘val64’ set but not used [-Wunused-but-set-variable] .../ethernet/neterion/vxge/vxge-traffic.c:490:6: warning: variable ‘val32’ set but not used [-Wunused-but-set-variable] .../ethernet/neterion/vxge/vxge-traffic.c:2378:6: warning: variable ‘val64’ set but not used [-Wunused-but-set-variable] .../ethernet/packetengines/yellowfin.c:1063:18: warning: variable ‘yf_size’ set but not used [-Wunused-but-set-variable] .../ethernet/realtek/8139cp.c:1242:6: warning: variable ‘rc’ set but not used [-Wunused-but-set-variable] .../ethernet/mellanox/mlx4/en_tx.c:858:6: warning: variable ‘ring_cons’ set but not used [-Wunused-but-set-variable] .../ethernet/sis/sis900.c:792:6: warning: variable ‘status’ set but not used [-Wunused-but-set-variable] .../ethernet/sfc/falcon/farch.c:878:11: warning: variable ‘rx_ev_pkt_type’ set but not used [-Wunused-but-set-variable] .../ethernet/sfc/falcon/farch.c:877:23: warning: variable ‘rx_ev_mcast_pkt’ set but not used [-Wunused-but-set-variable] .../ethernet/sfc/falcon/farch.c:877:7: warning: variable ‘rx_ev_hdr_type’ set but not used [-Wunused-but-set-variable] .../ethernet/sfc/falcon/farch.c:876:7: warning: variable ‘rx_ev_other_err’ set but not used [-Wunused-but-set-variable] .../ethernet/sfc/falcon/farch.c:1646:21: warning: variable ‘buftbl_min’ set but not used [-Wunused-but-set-variable] .../ethernet/sfc/falcon/farch.c:2535:32: warning: variable ‘spec’ set but not used [-Wunused-but-set-variable] .../ethernet/via/via-velocity.c:880:6: warning: variable ‘curr_status’ set but not used [-Wunused-but-set-variable] .../ethernet/ti/tlan.c:656:6: warning: variable ‘rc’ set but not used [-Wunused-but-set-variable] .../ethernet/ti/davinci_emac.c:1230:6: warning: variable ‘num_tx_pkts’ set but not used [-Wunused-but-set-variable] .../ethernet/synopsys/dwc-xlgmac-common.c:516:8: warning: variable ‘str’ set but not used [-Wunused-but-set-variable] .../ethernet/ti/cpsw_new.c:1662:22: warning: variable ‘priv’ set but not used [-Wunused-but-set-variable] The register reads should be OK, because the current implementation of readl and friends will always execute even without an lvalue. When it makes sense, just remove the lvalue assignment and the local. Other times, just remove the offending code, and occasionally, just mark the variable as maybe unused since it could be used in an ifdef or debug scenario. Only compile tested with W=1. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Acked-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller
Two minor conflicts: 1) net/ipv4/route.c, adding a new local variable while moving another local variable and removing it's initial assignment. 2) drivers/net/dsa/microchip/ksz9477.c, overlapping changes. One pretty prints the port mode differently, whilst another changes the driver to try and obtain the port mode from the port node rather than the switch node. Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-19net: ethernet: ti: cpsw: use true,false for bool variablesJason Yan
This addresses the following coccinelle warning: drivers/net/ethernet/ti/cpsw.c:1599:2-17: WARNING: Assignment of 0/1 to bool variable drivers/net/ethernet/ti/cpsw.c:1300:2-17: WARNING: Assignment of 0/1 to bool variable Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-12tlan: switch from 'pci_' to 'dma_' APIChristophe JAILLET
The wrappers in include/linux/pci-dma-compat.h should go away. The patch has been generated with the coccinelle script below and has been hand modified to replace GFP_ with a correct flag. It has been compile tested. When memory is allocated in 'tlan_init()' GFP_KERNEL can be used because it is only called from a probe function or a module_init function and no lock is taken in the between. The call chain is: tlan_probe (module_init function) --> tlan_eisa_probe or tlan_init_one (probe function) then in both cases: --> tlan_probe1 --> tlan_init @@ @@ - PCI_DMA_BIDIRECTIONAL + DMA_BIDIRECTIONAL @@ @@ - PCI_DMA_TODEVICE + DMA_TO_DEVICE @@ @@ - PCI_DMA_FROMDEVICE + DMA_FROM_DEVICE @@ @@ - PCI_DMA_NONE + DMA_NONE @@ expression e1, e2, e3; @@ - pci_alloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3; @@ - pci_zalloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3, e4; @@ - pci_free_consistent(e1, e2, e3, e4) + dma_free_coherent(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_single(e1, e2, e3, e4) + dma_map_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_single(e1, e2, e3, e4) + dma_unmap_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4, e5; @@ - pci_map_page(e1, e2, e3, e4, e5) + dma_map_page(&e1->dev, e2, e3, e4, e5) @@ expression e1, e2, e3, e4; @@ - pci_unmap_page(e1, e2, e3, e4) + dma_unmap_page(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_sg(e1, e2, e3, e4) + dma_map_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_sg(e1, e2, e3, e4) + dma_unmap_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_cpu(e1, e2, e3, e4) + dma_sync_single_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_device(e1, e2, e3, e4) + dma_sync_single_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_cpu(e1, e2, e3, e4) + dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_device(e1, e2, e3, e4) + dma_sync_sg_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2; @@ - pci_dma_mapping_error(e1, e2) + dma_mapping_error(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_dma_mask(e1, e2) + dma_set_mask(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_consistent_dma_mask(e1, e2) + dma_set_coherent_mask(&e1->dev, e2) Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-11net: ethernet: ti: cpsw_new: fix suspend/resumeGrygorii Strashko
Add missed suspend/resume callbacks to properly restore networking after suspend/resume cycle. Fixes: ed3525eda4c4 ("net: ethernet: ti: introduce cpsw switchdev based driver part 1 - dual-emac") Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-11net: ethernet: ti: ale: add support for multi port k3 cpsw versionsGrygorii Strashko
The TI J721E (CPSW9g) ALE version is similar, in general, to Sitara AM3/4/5 CPSW ALE, but has more extended functions and different ALE VLAN entry format. This patch adds support for for multi port TI J721E (CPSW9g) ALE variant. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-11net: ethernet: ti: ale: switch to use tables for vlan entry descriptionGrygorii Strashko
The ALE VLAN entries are too much differ between different TI CPSW ALE versions. So, handling them using flags, defines and get/set functions became over-complicated. This patch introduces tables to describe the ALE VLAN entries fields, which are different between TI CPSW ALE versions, and new get/set access functions. It also allows to detect incorrect access to not available ALL entry fields. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-11net: ethernet: ti: am65-cpsw: enable hw auto ageingGrygorii Strashko
The AM65x ALE supports HW auto-ageing which can be enabled by programming ageing interval in ALE_AGING_TIMER register. For this CPSW fck_clk frequency has to be know by ALE. This patch extends cpsw_ale_params with bus_freq field and enables ALE HW auto ageing for AM65x CPSW2G ALE version. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-11net: ethernet: ti: ale: make usage of ale dev_id mandatoryGrygorii Strashko
Hence all existing driver updated to use ALE dev_id the usage of ale dev_id can be made mandatory and cpsw_ale_create() can be updated to use "features" property from ALE static configuration. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-11net: ethernet: ti: am65-cpsw: use dev_id for ale configurationGrygorii Strashko
The previous patch has introduced possibility to select CPSW ALE by using ALE dev_id identifier. Switch TI TI AM65x/J721E CPSW NUSS driver to use dev_id. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-11net: netcp: ethss: use dev_id for ale configurationGrygorii Strashko
The previous patch has introduced possibility to select CPSW ALE by using ALE dev_id identifier. Switch TI Keystone 2 NETCP driver to use dev_id and perform clean up by removing "ale_entries" configuration code. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-11net: ethernet: ti: cpsw: use dev_id for ale configurationGrygorii Strashko
The previous patch has introduced possibility to select CPSW ALE by using ALE dev_id identifier. Switch TI cpsw driver to use dev_id="cpsw" and perform clean up by removing "ale_entries" configuration code. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-11net: ethernet: ti: ale: add static configurationGrygorii Strashko
As existing, as newly introduced CPSW ALE versions have differences in supported features and ALE table formats. Especially it's actual for the recent AM65x/J721E/J7200 SoC and feature AM64x, which supports features like: auto-aging, classifiers, Link aggregation, additional hw filtering, etc. Existing ALE configuration interface is not practical in terms of adding new features and requires consumers to program a lot static parameters. Any attempt to add new options will case endless adding and maintaining different combination of flags and options. Hence CPSW ALE configuration is static and fixed for SoC (or set of SoC) It is reasonable to add support for static ALE configurations inside ALE module. This patch adds static ALE configuration table for different ALE versions and provides option for consumers to select required ALE configuration by providing ALE const char *dev_id identifier. This feature is not enabled by default until existing CPSW drivers will be modified by follow up patches. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-11net: ethernet: ti: ale: add cpsw_ale_get_num_entries apiGrygorii Strashko
Add cpsw_ale_get_num_entries() API to return number of ALE table entries and update existing drivers to use it. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
We got slightly different patches removing a double word in a comment in net/ipv4/raw.c - picked the version from net. Simple conflict in drivers/net/ethernet/ibm/ibmvnic.c. Use cached values instead of VNIC login response buffer (following what commit 507ebe6444a4 ("ibmvnic: Fix use-after-free of VNIC login response buffer") did). Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-09-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds
Pull networking fixes from David Miller: 1) Use netif_rx_ni() when necessary in batman-adv stack, from Jussi Kivilinna. 2) Fix loss of RTT samples in rxrpc, from David Howells. 3) Memory leak in hns_nic_dev_probe(), from Dignhao Liu. 4) ravb module cannot be unloaded, fix from Yuusuke Ashizuka. 5) We disable BH for too lokng in sctp_get_port_local(), add a cond_resched() here as well, from Xin Long. 6) Fix memory leak in st95hf_in_send_cmd, from Dinghao Liu. 7) Out of bound access in bpf_raw_tp_link_fill_link_info(), from Yonghong Song. 8) Missing of_node_put() in mt7530 DSA driver, from Sumera Priyadarsini. 9) Fix crash in bnxt_fw_reset_task(), from Michael Chan. 10) Fix geneve tunnel checksumming bug in hns3, from Yi Li. 11) Memory leak in rxkad_verify_response, from Dinghao Liu. 12) In tipc, don't use smp_processor_id() in preemptible context. From Tuong Lien. 13) Fix signedness issue in mlx4 memory allocation, from Shung-Hsi Yu. 14) Missing clk_disable_prepare() in gemini driver, from Dan Carpenter. 15) Fix ABI mismatch between driver and firmware in nfp, from Louis Peens. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (110 commits) net/smc: fix sock refcounting in case of termination net/smc: reset sndbuf_desc if freed net/smc: set rx_off for SMCR explicitly net/smc: fix toleration of fake add_link messages tg3: Fix soft lockup when tg3_reset_task() fails. doc: net: dsa: Fix typo in config code sample net: dp83867: Fix WoL SecureOn password nfp: flower: fix ABI mismatch between driver and firmware tipc: fix shutdown() of connectionless socket ipv6: Fix sysctl max for fib_multipath_hash_policy drivers/net/wan/hdlc: Change the default of hard_header_len to 0 net: gemini: Fix another missing clk_disable_unprepare() in probe net: bcmgenet: fix mask check in bcmgenet_validate_flow() amd-xgbe: Add support for new port mode net: usb: dm9601: Add USB ID of Keenetic Plus DSL vhost: fix typo in error message net: ethernet: mlx4: Fix memory allocation in mlx4_buddy_init() pktgen: fix error message with wrong function name net: ethernet: ti: am65-cpsw: fix rmii 100Mbit link mode cxgb4: fix thermal zone device registration ...
2020-08-31net: ethernet: ti: am65-cpsw: fix rmii 100Mbit link modeGrygorii Strashko
In RMII link mode it's required to set bit 15 IFCTL_A in MAC_SL MAC_CONTROL register to enable support for 100Mbit link speed. Fixes: 93a76530316a ("net: ethernet: ti: introduce am65x/j721e gigabit eth subsystem driver") Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-31net: ethernet: ti: am65-cpts: fix i2083 genf (and estf) Reconfiguration IssueGrygorii Strashko
The new bit TX_GENF_CLR_EN has been added in AM65x SR2.0 to fix i2083 errata, which can be just set unconditionally for all SoCs. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-27net: ethernet: ti: cpsw_new: fix error handling in cpsw_ndo_vlan_rx_kill_vid()Murali Karicheri
This patch fixes a bunch of issues in cpsw_ndo_vlan_rx_kill_vid() - pm_runtime_get_sync() returns non zero value. This results in non zero value return to caller which will be interpreted as error. So overwrite ret with zero. - If VID matches with port VLAN VID, then set error code. - Currently when VLAN interface is deleted, all of the VLAN mc addresses are removed from ALE table, however the return values from ale function calls are not checked. These functions can return error code -ENOENT. But that shouldn't happen in a normal case. So add error print to catch the situations so that these can be investigated and addressed. return zero in these cases as these are not real error case, but only serve to catch ALE table update related issues and help address the same in the driver. Fixes: ed3525eda4c4 ("net: ethernet: ti: introduce cpsw switchdev based driver part 1 - dual-emac") Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-25net: ethernet: ti: cpsw_new: fix clean up of vlan mc entries for host portMurali Karicheri
To flush the vid + mc entries from ALE, which is required when a VLAN interface is removed, driver needs to call cpsw_ale_flush_multicast() with ALE_PORT_HOST for port mask as these entries are added only for host port. Without this, these entries remain in the ALE table even after removing the VLAN interface. cpsw_ale_flush_multicast() calls cpsw_ale_flush_mcast which expects a port mask to do the job. Fixes: ed3525eda4c4 ("net: ethernet: ti: introduce cpsw switchdev based driver part 1 - dual-emac") Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-25net: ethernet: ti: cpsw: fix clean up of vlan mc entries for host portMurali Karicheri
To flush the vid + mc entries from ALE, which is required when a VLAN interface is removed, driver needs to call cpsw_ale_flush_multicast() with ALE_PORT_HOST for port mask as these entries are added only for host port. Without this, these entries remain in the ALE table even after removing the VLAN interface. cpsw_ale_flush_multicast() calls cpsw_ale_flush_mcast which expects a port mask to do the job. Fixes: 15180eca569b ("net: ethernet: ti: cpsw: fix vlan mcast") Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-23treewide: Use fallthrough pseudo-keywordGustavo A. R. Silva
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2020-08-19ethernet: ti: cpts: Use generic helper functionKurt Kanzenbach
In order to reduce code duplication between ptp drivers, generic helper functions were introduced. Use them. Suggested-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-19ethernet: ti: am65-cpts: Use generic helper functionKurt Kanzenbach
In order to reduce code duplication between ptp drivers, generic helper functions were introduced. Use them. Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller
Daniel Borkmann says: ==================== pull-request: bpf-next 2020-08-04 The following pull-request contains BPF updates for your *net-next* tree. We've added 73 non-merge commits during the last 9 day(s) which contain a total of 135 files changed, 4603 insertions(+), 1013 deletions(-). The main changes are: 1) Implement bpf_link support for XDP. Also add LINK_DETACH operation for the BPF syscall allowing processes with BPF link FD to force-detach, from Andrii Nakryiko. 2) Add BPF iterator for map elements and to iterate all BPF programs for efficient in-kernel inspection, from Yonghong Song and Alexei Starovoitov. 3) Separate bpf_get_{stack,stackid}() helpers for perf events in BPF to avoid unwinder errors, from Song Liu. 4) Allow cgroup local storage map to be shared between programs on the same cgroup. Also extend BPF selftests with coverage, from YiFei Zhu. 5) Add BPF exception tables to ARM64 JIT in order to be able to JIT BPF_PROBE_MEM load instructions, from Jean-Philippe Brucker. 6) Follow-up fixes on BPF socket lookup in combination with reuseport group handling. Also add related BPF selftests, from Jakub Sitnicki. 7) Allow to use socket storage in BPF_PROG_TYPE_CGROUP_SOCK-typed programs for socket create/release as well as bind functions, from Stanislav Fomichev. 8) Fix an info leak in xsk_getsockopt() when retrieving XDP stats via old struct xdp_statistics, from Peilin Ye. 9) Fix PT_REGS_RC{,_CORE}() macros in libbpf for MIPS arch, from Jerry Crunchtime. 10) Extend BPF kernel test infra with skb->family and skb->{local,remote}_ip{4,6} fields and allow user space to specify skb->dev via ifindex, from Dmitry Yakunin. 11) Fix a bpftool segfault due to missing program type name and make it more robust to prevent them in future gaps, from Quentin Monnet. 12) Consolidate cgroup helper functions across selftests and fix a v6 localhost resolver issue, from John Fastabend. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-30tlan: use generic power managementVaibhav Gupta
Drivers using legacy power management .suspen()/.resume() callbacks have to manage PCI states and device's PM states themselves. They also need to take care of standard configuration registers. Switch to generic power management framework using a single "struct dev_pm_ops" variable to take the unnecessary load from the driver. This also avoids the need for the driver to directly call most of the PCI helper functions and device power state control functions, as through the generic framework PCI Core takes care of the necessary operations, and drivers are required to do only device-specific jobs. Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-25bpf, xdp: Remove XDP_QUERY_PROG and XDP_QUERY_PROG_HW XDP commandsAndrii Nakryiko
Now that BPF program/link management is centralized in generic net_device code, kernel code never queries program id from drivers, so XDP_QUERY_PROG/XDP_QUERY_PROG_HW commands are unnecessary. This patch removes all the implementations of those commands in kernel, along the xdp_attachment_query(). This patch was compile-tested on allyesconfig. Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200722064603.3350758-10-andriin@fb.com
2020-07-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller
The UDP reuseport conflict was a little bit tricky. The net-next code, via bpf-next, extracted the reuseport handling into a helper so that the BPF sk lookup code could invoke it. At the same time, the logic for reuseport handling of unconnected sockets changed via commit efc6b6f6c3113e8b203b9debfb72d81e0f3dcace which changed the logic to carry on the reuseport result into the rest of the lookup loop if we do not return immediately. This requires moving the reuseport_has_conns() logic into the callers. While we are here, get rid of inline directives as they do not belong in foo.c files. The other changes were cases of more straightforward overlapping modifications. Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-21net: ethernet: ti: add NETIF_F_HW_TC hw feature flag for taprio offloadMurali Karicheri
Currently drive supports taprio offload which is a tc feature offloaded to cpsw hardware. So driver has to set the hw feature flag, NETIF_F_HW_TC in the net device to be compliant. This patch adds the flag. Fixes: 8127224c2708 ("ethernet: ti: am65-cpsw-qos: add TAPRIO offload support") Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-29net: ethernet: ti: am65-cpsw-nuss: enable am65x sr2.0 supportGrygorii Strashko
The AM65x SR2.0 MCU CPSW has fixed errata i2027 "CPSW: CPSW Does Not Support CPPI Receive Checksum (Host to Ethernet) Offload Feature". This errata also fixed for J271E SoC. Use SOC bus data for K3 SoC identification and apply i2027 errata w/a only for the AM65x SR1.0 SoC. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-29net: ethernet: ti: am65-cpsw-ethtool: configured critical setting only when ↵Grygorii Strashko
no running netdevs Ensure that critical setting can only be configured when there are no running netdevs - all ports are down. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-29net: ethernet: ti: am65-cpsw-ethtool: skip hw cfg when change p0-rx-ptype-rrobinGrygorii Strashko
Skip HW configuration when p0-rx-ptype-rrobin is changed as it will be done by .ndev_open(), Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.0.4) at 2026-04-20 01:49:54 +0000