summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/ti
AgeCommit message (Collapse)Author
7 daysnet: ethernet: ti: am65-cpsw-qos: fix IET verify retry mechanismAksh Garg
The am65_cpsw_iet_verify_wait() function attempts verification 20 times, toggling the AM65_CPSW_PN_IET_MAC_LINKFAIL bit in each iteration. When the LINKFAIL bit transitions from 1 to 0, the MAC merge layer initiates the verification process and waits for the timeout configured in MAC_VERIFY_CNT before automatically retransmitting. The MAC_VERIFY_CNT register is configured according to the user-defined verify/response timeout in am65_cpsw_iet_set_verify_timeout_count(). As per IEEE 802.3 Clause 99, the hardware performs this automatic retry up to 3 times. Current implementation toggles LINKFAIL after the user-configured verify/response timeout in each iteration, forcing the hardware to restart verification instead of respecting the MAC_VERIFY_CNT timeout. This bypasses the hardware's automatic retry mechanism. Fix this by moving the LINKFAIL bit toggle outside the retry loop and reducing the retry count from 20 to 3. The software now only monitors the status register while the hardware autonomously handles the 3 verification attempts at proper MAC_VERIFY_CNT intervals. Fixes: 49a2eb9068246 ("net: ethernet: ti: am65-cpsw-qos: Add Frame Preemption MAC Merge support") Signed-off-by: Aksh Garg <a-garg7@ti.com> Link: https://patch.msgid.link/20251106092305.1437347-3-a-garg7@ti.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
7 daysnet: ethernet: ti: am65-cpsw-qos: fix IET verify/response timeoutAksh Garg
The CPSW module uses the MAC_VERIFY_CNT bit field in the CPSW_PN_IET_VERIFY_REG_k register to set the verify/response timeout count. This register specifies the number of clock cycles to wait before resending a verify packet if the verification fails. The verify/response timeout count, as being set by the function am65_cpsw_iet_set_verify_timeout_count() is hardcoded for 125MHz clock frequency, which varies based on PHY mode and link speed. The respective clock frequencies are as follows: - RGMII mode: * 1000 Mbps: 125 MHz * 100 Mbps: 25 MHz * 10 Mbps: 2.5 MHz - QSGMII/SGMII mode: 125 MHz (all speeds) Fix this by adding logic to calculate the correct timeout counts based on the actual PHY interface mode and link speed. Fixes: 49a2eb9068246 ("net: ethernet: ti: am65-cpsw-qos: Add Frame Preemption MAC Merge support") Signed-off-by: Aksh Garg <a-garg7@ti.com> Link: https://patch.msgid.link/20251106092305.1437347-2-a-garg7@ti.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
12 daysnet: ti: icssg-prueth: Fix fdb hash size configurationMeghana Malladi
The ICSSG driver does the initial FDB configuration which includes setting the control registers. Other run time management like learning is managed by the PRU's. The default FDB hash size used by the firmware is 512 slots, which is currently missing in the current driver. Update the driver FDB config to include FDB hash size as well. Please refer trm [1] 6.4.14.12.17 section on how the FDB config register gets configured. From the table 6-1404, there is a reset field for FDB_HAS_SIZE which is 4, meaning 1024 slots. Currently the driver is not updating this reset value from 4(1024 slots) to 3(512 slots). This patch fixes this by updating the reset value to 512 slots. [1]: https://www.ti.com/lit/pdf/spruim2 Fixes: abd5576b9c57f ("net: ti: icssg-prueth: Add support for ICSSG switch firmware") Signed-off-by: Meghana Malladi <m-malladi@ti.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20251104104415.3110537-1-m-malladi@ti.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
13 daysnet: ethernet: ti: netcp: Standardize knav_dma_open_channel to return NULL ↵Nishanth Menon
on error Make knav_dma_open_channel consistently return NULL on error instead of ERR_PTR. Currently the header include/linux/soc/ti/knav_dma.h returns NULL when the driver is disabled, but the driver implementation does not even return NULL or ERR_PTR on failure, causing inconsistency in the users. This results in a crash in netcp_free_navigator_resources as followed (trimmed): Unhandled fault: alignment exception (0x221) at 0xfffffff2 [fffffff2] *pgd=80000800207003, *pmd=82ffda003, *pte=00000000 Internal error: : 221 [#1] SMP ARM Modules linked in: CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.17.0-rc7 #1 NONE Hardware name: Keystone PC is at knav_dma_close_channel+0x30/0x19c LR is at netcp_free_navigator_resources+0x2c/0x28c [... TRIM...] Call trace: knav_dma_close_channel from netcp_free_navigator_resources+0x2c/0x28c netcp_free_navigator_resources from netcp_ndo_open+0x430/0x46c netcp_ndo_open from __dev_open+0x114/0x29c __dev_open from __dev_change_flags+0x190/0x208 __dev_change_flags from netif_change_flags+0x1c/0x58 netif_change_flags from dev_change_flags+0x38/0xa0 dev_change_flags from ip_auto_config+0x2c4/0x11f0 ip_auto_config from do_one_initcall+0x58/0x200 do_one_initcall from kernel_init_freeable+0x1cc/0x238 kernel_init_freeable from kernel_init+0x1c/0x12c kernel_init from ret_from_fork+0x14/0x38 [... TRIM...] Standardize the error handling by making the function return NULL on all error conditions. The API is used in just the netcp_core.c so the impact is limited. Note, this change, in effect reverts commit 5b6cb43b4d62 ("net: ethernet: ti: netcp_core: return error while dma channel open issue"), but provides a less error prone implementation. Suggested-by: Simon Horman <horms@kernel.org> Suggested-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Nishanth Menon <nm@ti.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20251103162811.3730055-1-nm@ti.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-10-21net: ethernet: ti: am65-cpts: fix timestamp loss due to race conditionsAksh Garg
Resolve race conditions in timestamp events list handling between TX and RX paths causing missed timestamps. The current implementation uses a single events list for both TX and RX timestamps. The am65_cpts_find_ts() function acquires the lock, splices all events (TX as well as RX events) to a temporary list, and releases the lock. This function performs matching of timestamps for TX packets only. Before it acquires the lock again to put the non-TX events back to the main events list, a concurrent RX processing thread could acquire the lock (as observed in practice), find an empty events list, and fail to attach timestamp to it, even though a relevant event exists in the spliced list which is yet to be restored to the main list. Fix this by creating separate events lists to handle TX and RX timestamps independently. Fixes: c459f606f66df ("net: ethernet: ti: am65-cpts: Enable RX HW timestamp for PTP packets using CPTS FIFO") Signed-off-by: Aksh Garg <a-garg7@ti.com> Reviewed-by: Siddharth Vadapalli <s-vadapalli@ti.com> Link: https://patch.msgid.link/20251016115755.1123646-1-a-garg7@ti.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-09-19net: ti: icssm-prueth: unwind cleanly in probe()Dan Carpenter
This error handling triggers a Smatch warning: drivers/net/ethernet/ti/icssm/icssm_prueth.c:1574 icssm_prueth_probe() warn: 'prueth->pru1' is an error pointer or valid The warning is harmless because the pru_rproc_put() function has an IS_ERR_OR_NULL() check built in. However, there is a small bug if syscon_regmap_lookup_by_phandle() fails. In that case we should call of_node_put() on eth0_node and eth1_node. It's a little bit easier to re-write this code to only free things which we know have been allocated successfully. Fixes: 511f6c1ae093 ("net: ti: icssm-prueth: Adds ICSSM Ethernet driver") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Parvathi Pudi <parvathi@couthit.com> Link: https://patch.msgid.link/aMvVagz8aBRxMvFn@stanley.mountain Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-09-18net: ti: am65-cpsw: Update hw timestamping filter for PTPv1 RX packetsVishnu Singh
CPTS module of CPSW supports hardware timestamping of PTPv1 packets.Update the "hwtstamp_rx_filters" of CPSW driver to enable timestamping of received PTPv1 packets. Also update the advertised capability to include PTPv1. Signed-off-by: Vishnu Singh <v-singh1@ti.com> Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev> Reviewed-by: MD Danish Anwar <danishanwar@ti.com> Link: https://patch.msgid.link/20250917041455.1815579-1-v-singh1@ti.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-09-14net: ti: icssm-prueth: Adds IEP support for PRUETH on AM33x, AM43x and AM57x ↵Parvathi Pudi
SOCs Added API hooks for IEP module (legacy 32-bit model) to support timestamping requests from application. Reviewed-by: Mohan Reddy Putluru <pmohan@couthit.com> Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Andrew F. Davis <afd@ti.com> Signed-off-by: Basharath Hussain Khaja <basharath@couthit.com> Signed-off-by: Parvathi Pudi <parvathi@couthit.com> Link: https://patch.msgid.link/20250912115443.529856-6-parvathi@couthit.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-09-14net: ti: icssm-prueth: Adds link detection, RX and TX support.Roger Quadros
Changes corresponding to link configuration such as speed and duplexity. IRQ and handler initializations are performed for packet reception.Firmware receives the packet from the wire and stores it into OCMC queue. Next, it notifies the CPU via interrupt. Upon receiving the interrupt CPU will service the IRQ and packet will be processed by pushing the newly allocated SKB to upper layers. When the user application want to transmit a packet, it will invoke sys_send() which will in turn invoke the PRUETH driver, then it will write the packet into OCMC queues. PRU firmware will pick up the packet and transmit it on to the wire. Reviewed-by: Mohan Reddy Putluru <pmohan@couthit.com> Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Andrew F. Davis <afd@ti.com> Signed-off-by: Basharath Hussain Khaja <basharath@couthit.com> Signed-off-by: Parvathi Pudi <parvathi@couthit.com> Link: https://patch.msgid.link/20250912115443.529856-5-parvathi@couthit.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-09-14net: ti: icssm-prueth: Adds PRUETH HW and SW configurationRoger Quadros
Updates for MII_RT hardware peripheral configuration such as RX and TX configuration for PRU0 and PRU1, frame sizes, and MUX config. Updates for PRU-ICSS firmware register configuration and DRAM, SRAM and OCMC memory initialization, which will be used in the runtime for packet reception and transmission. DUAL-EMAC memory allocation for software queues and its supporting components such as the buffer descriptors and queue descriptors. These software queues are placed in OCMC memory and are shared with CPU by PRU-ICSS for packet receive and transmit. All declarations and macros are being used from common header file for various protocols. Reviewed-by: Mohan Reddy Putluru <pmohan@couthit.com> Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Andrew F. Davis <afd@ti.com> Signed-off-by: Basharath Hussain Khaja <basharath@couthit.com> Signed-off-by: Parvathi Pudi <parvathi@couthit.com> Link: https://patch.msgid.link/20250912115443.529856-4-parvathi@couthit.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-09-14net: ti: icssm-prueth: Adds ICSSM Ethernet driverRoger Quadros
Updates Kernel configuration to enable PRUETH driver and its dependencies along with makefile changes to add the new PRUETH driver. Changes includes init and deinit of ICSSM PRU Ethernet driver including net dev registration and firmware loading for DUAL-MAC mode running on PRU-ICSS2 instance. Changes also includes link handling, PRU booting, default firmware loading and PRU stopping using existing remoteproc driver APIs. Reviewed-by: Mohan Reddy Putluru <pmohan@couthit.com> Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Andrew F. Davis <afd@ti.com> Signed-off-by: Basharath Hussain Khaja <basharath@couthit.com> Signed-off-by: Parvathi Pudi <parvathi@couthit.com> Link: https://patch.msgid.link/20250912104741.528721-3-parvathi@couthit.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-09-11hsr: hold rcu and dev lock for hsr_get_port_ndevHangbin Liu
hsr_get_port_ndev calls hsr_for_each_port, which need to hold rcu lock. On the other hand, before return the port device, we need to hold the device reference to avoid UaF in the caller function. Suggested-by: Paolo Abeni <pabeni@redhat.com> Fixes: 9c10dd8eed74 ("net: hsr: Create and export hsr_get_port_ndev()") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250905091533.377443-4-liuhangbin@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-09-02net: ethernet: ti: am65-cpsw-nuss: Fix null pointer dereference for ndevNishanth Menon
In the TX completion packet stage of TI SoCs with CPSW2G instance, which has single external ethernet port, ndev is accessed without being initialized if no TX packets have been processed. It results into null pointer dereference, causing kernel to crash. Fix this by having a check on the number of TX packets which have been processed. Fixes: 9a369ae3d143 ("net: ethernet: ti: am65-cpsw: remove am65_cpsw_nuss_tx_compl_packets_2g()") Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Chintan Vankar <c-vankar@ti.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250829121051.2031832-1-c-vankar@ti.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-08-19net: ti: icssg-prueth: Fix HSR and switch offload Enablement during firwmare ↵MD Danish Anwar
reload. To enable HSR / Switch offload, certain configurations are needed. Currently they are done inside icssg_change_mode(). This function only gets called if we move from one mode to another without bringing the links up / down. Once in HSR / Switch mode, if we bring the links down and bring it back up again. The callback sequence is, - emac_ndo_stop() Firmwares are stopped - emac_ndo_open() Firmwares are loaded In this path icssg_change_mode() doesn't get called and as a result the configurations needed for HSR / Switch is not done. To fix this, put all these configurations in a separate function icssg_enable_fw_offload() and call this from both icssg_change_mode() and emac_ndo_open() Fixes: 56375086d093 ("net: ti: icssg-prueth: Enable HSR Tx duplication, Tx Tag and Rx Tag offload") Signed-off-by: MD Danish Anwar <danishanwar@ti.com> Link: https://patch.msgid.link/20250814105106.1491871-1-danishanwar@ti.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-08-08net: ti: icss-iep: Fix incorrect type for return value in extts_enable()Alok Tiwari
The variable ret in icss_iep_extts_enable() was incorrectly declared as u32, while the function returns int and may return negative error codes. This will cause sign extension issues and incorrect error propagation. Update ret to be int to fix error handling. This change corrects the declaration to avoid potential type mismatch. Fixes: c1e0230eeaab ("net: ti: icss-iep: Add IEP driver") Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/20250805142323.1949406-1-alok.a.tiwari@oracle.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-08-08net: ti: icssg-prueth: Fix emac link speed handlingMD Danish Anwar
When link settings are changed emac->speed is populated by emac_adjust_link(). The link speed and other settings are then written into the DRAM. However if both ports are brought down after this and brought up again or if the operating mode is changed and a firmware reload is needed, the DRAM is cleared by icssg_config(). As a result the link settings are lost. Fix this by calling emac_adjust_link() after icssg_config(). This re populates the settings in the DRAM after a new firmware load. Fixes: 9facce84f406 ("net: ti: icssg-prueth: Fix firmware load sequence.") Signed-off-by: MD Danish Anwar <danishanwar@ti.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Message-ID: <20250805173812.2183161-1-danishanwar@ti.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-08-05net: ti: icssg-prueth: Fix skb handling for XDP_PASSMeghana Malladi
emac_rx_packet() is a common function for handling traffic for both xdp and non-xdp use cases. Use common logic for handling skb with or without xdp to prevent any incorrect packet processing. This patch fixes ping working with XDP_PASS for icssg driver. Fixes: 62aa3246f4623 ("net: ti: icssg-prueth: Add XDP support") Signed-off-by: Meghana Malladi <m-malladi@ti.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20250803180216.3569139-1-m-malladi@ti.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-30net: ti: icss-iep: fix device and OF node leaks at probeJohan Hovold
Make sure to drop the references to the IEP OF node and device taken by of_parse_phandle() and of_find_device_by_node() when looking up IEP devices during probe. Drop the bogus additional reference taken on successful lookup so that the device is released correctly by icss_iep_put(). Fixes: c1e0230eeaab ("net: ti: icss-iep: Add IEP driver") Cc: stable@vger.kernel.org # 6.6 Cc: Roger Quadros <rogerq@kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250725171213.880-6-johan@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-30Merge tag 'net-next-6.17' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core & protocols: - Wrap datapath globals into net_aligned_data, to avoid false sharing - Preserve MSG_ZEROCOPY in forwarding (e.g. out of a container) - Add SO_INQ and SCM_INQ support to AF_UNIX - Add SIOCINQ support to AF_VSOCK - Add TCP_MAXSEG sockopt to MPTCP - Add IPv6 force_forwarding sysctl to enable forwarding per interface - Make TCP validation of whether packet fully fits in the receive window and the rcv_buf more strict. With increased use of HW aggregation a single "packet" can be multiple 100s of kB - Add MSG_MORE flag to optimize large TCP transmissions via sockmap, improves latency up to 33% for sockmap users - Convert TCP send queue handling from tasklet to BH workque - Improve BPF iteration over TCP sockets to see each socket exactly once - Remove obsolete and unused TCP RFC3517/RFC6675 loss recovery code - Support enabling kernel threads for NAPI processing on per-NAPI instance basis rather than a whole device. Fully stop the kernel NAPI thread when threaded NAPI gets disabled. Previously thread would stick around until ifdown due to tricky synchronization - Allow multicast routing to take effect on locally-generated packets - Add output interface argument for End.X in segment routing - MCTP: add support for gateway routing, improve bind() handling - Don't require rtnl_lock when fetching an IPv6 neighbor over Netlink - Add a new neighbor flag ("extern_valid"), which cedes refresh responsibilities to userspace. This is needed for EVPN multi-homing where a neighbor entry for a multi-homed host needs to be synced across all the VTEPs among which the host is multi-homed - Support NUD_PERMANENT for proxy neighbor entries - Add a new queuing discipline for IETF RFC9332 DualQ Coupled AQM - Add sequence numbers to netconsole messages. Unregister netconsole's console when all net targets are removed. Code refactoring. Add a number of selftests - Align IPSec inbound SA lookup to RFC 4301. Only SPI and protocol should be used for an inbound SA lookup - Support inspecting ref_tracker state via DebugFS - Don't force bonding advertisement frames tx to ~333 ms boundaries. Add broadcast_neighbor option to send ARP/ND on all bonded links - Allow providing upcall pid for the 'execute' command in openvswitch - Remove DCCP support from Netfilter's conntrack - Disallow multiple packet duplications in the queuing layer - Prevent use of deprecated iptables code on PREEMPT_RT Driver API: - Support RSS and hashing configuration over ethtool Netlink - Add dedicated ethtool callbacks for getting and setting hashing fields - Add support for power budget evaluation strategy in PSE / Power-over-Ethernet. Generate Netlink events for overcurrent etc - Support DPLL phase offset monitoring across all device inputs. Support providing clock reference and SYNC over separate DPLL inputs - Support traffic classes in devlink rate API for bandwidth management - Remove rtnl_lock dependency from UDP tunnel port configuration Device drivers: - Add a new Broadcom driver for 800G Ethernet (bnge) - Add a standalone driver for Microchip ZL3073x DPLL - Remove IBM's NETIUCV device driver - Ethernet high-speed NICs: - Broadcom (bnxt): - support zero-copy Tx of DMABUF memory - take page size into account for page pool recycling rings - Intel (100G, ice, idpf): - idpf: XDP and AF_XDP support preparations - idpf: add flow steering - add link_down_events statistic - clean up the TSPLL code - preparations for live VM migration - nVidia/Mellanox: - support zero-copy Rx/Tx interfaces (DMABUF and io_uring) - optimize context memory usage for matchers - expose serial numbers in devlink info - support PCIe congestion metrics - Meta (fbnic): - add 25G, 50G, and 100G link modes to phylink - support dumping FW logs - Marvell/Cavium: - support for CN20K generation of the Octeon chips - Amazon: - add HW clock (without timestamping, just hypervisor time access) - Ethernet virtual: - VirtIO net: - support segmentation of UDP-tunnel-encapsulated packets - Google (gve): - support packet timestamping and clock synchronization - Microsoft vNIC: - add handler for device-originated servicing events - allow dynamic MSI-X vector allocation - support Tx bandwidth clamping - Ethernet NICs consumer, and embedded: - AMD: - amd-xgbe: hardware timestamping and PTP clock support - Broadcom integrated MACs (bcmgenet, bcmasp): - use napi_complete_done() return value to support NAPI polling - add support for re-starting auto-negotiation - Broadcom switches (b53): - support BCM5325 switches - add bcm63xx EPHY power control - Synopsys (stmmac): - lots of code refactoring and cleanups - TI: - icssg-prueth: read firmware-names from device tree - icssg: PRP offload support - Microchip: - lan78xx: convert to PHYLINK for improved PHY and MAC management - ksz: add KSZ8463 switch support - Intel: - support similar queue priority scheme in multi-queue and time-sensitive networking (taprio) - support packet pre-emption in both - RealTek (r8169): - enable EEE at 5Gbps on RTL8126 - Airoha: - add PPPoE offload support - MDIO bus controller for Airoha AN7583 - Ethernet PHYs: - support for the IPQ5018 internal GE PHY - micrel KSZ9477 switch-integrated PHYs: - add MDI/MDI-X control support - add RX error counters - add cable test support - add Signal Quality Indicator (SQI) reporting - dp83tg720: improve reset handling and reduce link recovery time - support bcm54811 (and its MII-Lite interface type) - air_en8811h: support resume/suspend - support PHY counters for QCA807x and QCA808x - support WoL for QCA807x - CAN drivers: - rcar_canfd: support for Transceiver Delay Compensation - kvaser: report FW versions via devlink dev info - WiFi: - extended regulatory info support (6 GHz) - add statistics and beacon monitor for Multi-Link Operation (MLO) - support S1G aggregation, improve S1G support - add Radio Measurement action fields - support per-radio RTS threshold - some work around how FIPS affects wifi, which was wrong (RC4 is used by TKIP, not only WEP) - improvements for unsolicited probe response handling - WiFi drivers: - RealTek (rtw88): - IBSS mode for SDIO devices - RealTek (rtw89): - BT coexistence for MLO/WiFi7 - concurrent station + P2P support - support for USB devices RTL8851BU/RTL8852BU - Intel (iwlwifi): - use embedded PNVM in (to be released) FW images to fix compatibility issues - many cleanups (unused FW APIs, PCIe code, WoWLAN) - some FIPS interoperability - MediaTek (mt76): - firmware recovery improvements - more MLO work - Qualcomm/Atheros (ath12k): - fix scan on multi-radio devices - more EHT/Wi-Fi 7 features - encapsulation/decapsulation offload - Broadcom (brcm80211): - support SDIO 43751 device - Bluetooth: - hci_event: add support for handling LE BIG Sync Lost event - ISO: add socket option to report packet seqnum via CMSG - ISO: support SCM_TIMESTAMPING for ISO TS - Bluetooth drivers: - intel_pcie: support Function Level Reset - nxpuart: add support for 4M baudrate - nxpuart: implement powerup sequence, reset, FW dump, and FW loading" * tag 'net-next-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1742 commits) dpll: zl3073x: Fix build failure selftests: bpf: fix legacy netfilter options ipv6: annotate data-races around rt->fib6_nsiblings ipv6: fix possible infinite loop in fib6_info_uses_dev() ipv6: prevent infinite loop in rt6_nlmsg_size() ipv6: add a retry logic in net6_rt_notify() vrf: Drop existing dst reference in vrf_ip6_input_dst net/sched: taprio: align entry index attr validation with mqprio net: fsl_pq_mdio: use dev_err_probe selftests: rtnetlink.sh: remove esp4_offload after test vsock: remove unnecessary null check in vsock_getname() igb: xsk: solve negative overflow of nb_pkts in zerocopy mode stmmac: xsk: fix negative overflow of budget in zerocopy mode dt-bindings: ieee802154: Convert at86rf230.txt yaml format net: dsa: microchip: Disable PTP function of KSZ8463 net: dsa: microchip: Setup fiber ports for KSZ8463 net: dsa: microchip: Write switch MAC address differently for KSZ8463 net: dsa: microchip: Use different registers for KSZ8463 net: dsa: microchip: Add KSZ8463 switch support to KSZ DSA driver dt-bindings: net: dsa: microchip: Add KSZ8463 switch support ...
2025-07-29Merge tag 'timers-cleanups-2025-07-27' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer cleanups from Thomas Gleixner: "A treewide cleanup of struct cycle_counter const annotations. The initial idea of making them const was correct as they were seperate instances. When they got embedded into larger data structures, which are even modified by the callback this got moot. The only reason why this went unnoticed is that the required container_of() casts the const attribute forcefully away. Stop pretending that it is const" * tag 'timers-cleanups-2025-07-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: time/timecounter: Fix the lie that struct cyclecounter is const
2025-07-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR (net-6.16-rc8). Conflicts: drivers/net/ethernet/microsoft/mana/gdma_main.c 9669ddda18fb ("net: mana: Fix warnings for missing export.h header inclusion") 755391121038 ("net: mana: Allocate MSI-X vectors dynamically") https://lore.kernel.org/20250711130752.23023d98@canb.auug.org.au Adjacent changes: drivers/net/ethernet/ti/icssg/icssg_prueth.h 6e86fb73de0f ("net: ti: icssg-prueth: Fix buffer allocation for ICSSG") ffe8a4909176 ("net: ti: icssg-prueth: Read firmware-names from device tree") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-23net: ti: icssg-prueth: access ->pp through netmem_desc instead of pageByungchul Park
To eliminate the use of struct page in page pool, the page pool users should use netmem descriptor and APIs instead. Make icssg-prueth access ->pp through netmem_desc instead of page. Signed-off-by: Byungchul Park <byungchul@sk.com> Link: https://patch.msgid.link/20250721021835.63939-12-byungchul@sk.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-18net: ti: icssg-prueth: Fix buffer allocation for ICSSGHimanshu Mittal
Fixes overlapping buffer allocation for ICSSG peripheral used for storing packets to be received/transmitted. There are 3 buffers: 1. Buffer for Locally Injected Packets 2. Buffer for Forwarding Packets 3. Buffer for Host Egress Packets In existing allocation buffers for 2. and 3. are overlapping causing packet corruption. Packet corruption observations: During tcp iperf testing, due to overlapping buffers the received ack packet overwrites the packet to be transmitted. So, we see packets on wire with the ack packet content inside the content of next TCP packet from sender device. Details for AM64x switch mode: -> Allocation by existing driver: +---------+-------------------------------------------------------------+ | | SLICE 0 | SLICE 1 | | +------+--------------+--------+------+--------------+--------+ | | Slot | Base Address | Size | Slot | Base Address | Size | |---------+------+--------------+--------+------+--------------+--------+ | | 0 | 70000000 | 0x2000 | 0 | 70010000 | 0x2000 | | | 1 | 70002000 | 0x2000 | 1 | 70012000 | 0x2000 | | | 2 | 70004000 | 0x2000 | 2 | 70014000 | 0x2000 | | FWD | 3 | 70006000 | 0x2000 | 3 | 70016000 | 0x2000 | | Buffers | 4 | 70008000 | 0x2000 | 4 | 70018000 | 0x2000 | | | 5 | 7000A000 | 0x2000 | 5 | 7001A000 | 0x2000 | | | 6 | 7000C000 | 0x2000 | 6 | 7001C000 | 0x2000 | | | 7 | 7000E000 | 0x2000 | 7 | 7001E000 | 0x2000 | +---------+------+--------------+--------+------+--------------+--------+ | | 8 | 70020000 | 0x1000 | 8 | 70028000 | 0x1000 | | | 9 | 70021000 | 0x1000 | 9 | 70029000 | 0x1000 | | | 10 | 70022000 | 0x1000 | 10 | 7002A000 | 0x1000 | | Our | 11 | 70023000 | 0x1000 | 11 | 7002B000 | 0x1000 | | LI | 12 | 00000000 | 0x0 | 12 | 00000000 | 0x0 | | Buffers | 13 | 00000000 | 0x0 | 13 | 00000000 | 0x0 | | | 14 | 00000000 | 0x0 | 14 | 00000000 | 0x0 | | | 15 | 00000000 | 0x0 | 15 | 00000000 | 0x0 | +---------+------+--------------+--------+------+--------------+--------+ | | 16 | 70024000 | 0x1000 | 16 | 7002C000 | 0x1000 | | | 17 | 70025000 | 0x1000 | 17 | 7002D000 | 0x1000 | | | 18 | 70026000 | 0x1000 | 18 | 7002E000 | 0x1000 | | Their | 19 | 70027000 | 0x1000 | 19 | 7002F000 | 0x1000 | | LI | 20 | 00000000 | 0x0 | 20 | 00000000 | 0x0 | | Buffers | 21 | 00000000 | 0x0 | 21 | 00000000 | 0x0 | | | 22 | 00000000 | 0x0 | 22 | 00000000 | 0x0 | | | 23 | 00000000 | 0x0 | 23 | 00000000 | 0x0 | +---------+------+--------------+--------+------+--------------+--------+ --> here 16, 17, 18, 19 overlapping with below express buffer +-----+-----------------------------------------------+ | | SLICE 0 | SLICE 1 | | +------------+----------+------------+----------+ | | Start addr | End addr | Start addr | End addr | +-----+------------+----------+------------+----------+ | EXP | 70024000 | 70028000 | 7002C000 | 70030000 | <-- Overlapping | PRE | 70030000 | 70033800 | 70034000 | 70037800 | +-----+------------+----------+------------+----------+ +---------------------+----------+----------+ | | SLICE 0 | SLICE 1 | +---------------------+----------+----------+ | Default Drop Offset | 00000000 | 00000000 | <-- Field not configured +---------------------+----------+----------+ -> Allocation this patch brings: +---------+-------------------------------------------------------------+ | | SLICE 0 | SLICE 1 | | +------+--------------+--------+------+--------------+--------+ | | Slot | Base Address | Size | Slot | Base Address | Size | |---------+------+--------------+--------+------+--------------+--------+ | | 0 | 70000000 | 0x2000 | 0 | 70040000 | 0x2000 | | | 1 | 70002000 | 0x2000 | 1 | 70042000 | 0x2000 | | | 2 | 70004000 | 0x2000 | 2 | 70044000 | 0x2000 | | FWD | 3 | 70006000 | 0x2000 | 3 | 70046000 | 0x2000 | | Buffers | 4 | 70008000 | 0x2000 | 4 | 70048000 | 0x2000 | | | 5 | 7000A000 | 0x2000 | 5 | 7004A000 | 0x2000 | | | 6 | 7000C000 | 0x2000 | 6 | 7004C000 | 0x2000 | | | 7 | 7000E000 | 0x2000 | 7 | 7004E000 | 0x2000 | +---------+------+--------------+--------+------+--------------+--------+ | | 8 | 70010000 | 0x1000 | 8 | 70050000 | 0x1000 | | | 9 | 70011000 | 0x1000 | 9 | 70051000 | 0x1000 | | | 10 | 70012000 | 0x1000 | 10 | 70052000 | 0x1000 | | Our | 11 | 70013000 | 0x1000 | 11 | 70053000 | 0x1000 | | LI | 12 | 00000000 | 0x0 | 12 | 00000000 | 0x0 | | Buffers | 13 | 00000000 | 0x0 | 13 | 00000000 | 0x0 | | | 14 | 00000000 | 0x0 | 14 | 00000000 | 0x0 | | | 15 | 00000000 | 0x0 | 15 | 00000000 | 0x0 | +---------+------+--------------+--------+------+--------------+--------+ | | 16 | 70014000 | 0x1000 | 16 | 70054000 | 0x1000 | | | 17 | 70015000 | 0x1000 | 17 | 70055000 | 0x1000 | | | 18 | 70016000 | 0x1000 | 18 | 70056000 | 0x1000 | | Their | 19 | 70017000 | 0x1000 | 19 | 70057000 | 0x1000 | | LI | 20 | 00000000 | 0x0 | 20 | 00000000 | 0x0 | | Buffers | 21 | 00000000 | 0x0 | 21 | 00000000 | 0x0 | | | 22 | 00000000 | 0x0 | 22 | 00000000 | 0x0 | | | 23 | 00000000 | 0x0 | 23 | 00000000 | 0x0 | +---------+------+--------------+--------+------+--------------+--------+ +-----+-----------------------------------------------+ | | SLICE 0 | SLICE 1 | | +------------+----------+------------+----------+ | | Start addr | End addr | Start addr | End addr | +-----+------------+----------+------------+----------+ | EXP | 70018000 | 7001C000 | 70058000 | 7005C000 | | PRE | 7001C000 | 7001F800 | 7005C000 | 7005F800 | +-----+------------+----------+------------+----------+ +---------------------+----------+----------+ | | SLICE 0 | SLICE 1 | +---------------------+----------+----------+ | Default Drop Offset | 7001F800 | 7005F800 | +---------------------+----------+----------+ Rootcause: missing buffer configuration for Express frames in function: prueth_fw_offload_buffer_setup() Details: Driver implements two distinct buffer configuration functions that are invoked based on the driver state and ICSSG firmware:- - prueth_fw_offload_buffer_setup() - prueth_emac_buffer_setup() During initialization, driver creates standard network interfaces (netdevs) and configures buffers via prueth_emac_buffer_setup(). This function properly allocates and configures all required memory regions including: - LI buffers - Express packet buffers - Preemptible packet buffers However, when the driver transitions to an offload mode (switch/HSR/PRP), buffer reconfiguration is handled by prueth_fw_offload_buffer_setup(). This function does not reconfigure the buffer regions required for Express packets, leading to incorrect buffer allocation. Fixes: abd5576b9c57 ("net: ti: icssg-prueth: Add support for ICSSG switch firmware") Signed-off-by: Himanshu Mittal <h-mittal1@ti.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250717094220.546388-1-h-mittal1@ti.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR (net-6.16-rc6). No conflicts. Adjacent changes: Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml 0a12c435a1d6 ("dt-bindings: net: sun8i-emac: Add A100 EMAC compatible") b3603c0466a8 ("dt-bindings: net: sun8i-emac: Rename A523 EMAC0 to GMAC0") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-09net: ethernet: ti: am65-cpsw-nuss: Fix skb size by accounting for ↵Chintan Vankar
skb_shared_info While transitioning from netdev_alloc_ip_align() to build_skb(), memory for the "skb_shared_info" member of an "skb" was not allocated. Fix this by allocating "PAGE_SIZE" as the skb length, accounting for the packet length, headroom and tailroom, thereby including the required memory space for skb_shared_info. Fixes: 8acacc40f733 ("net: ethernet: ti: am65-cpsw: Add minimal XDP support") Reviewed-by: Siddharth Vadapalli <s-vadapalli@ti.com> Signed-off-by: Chintan Vankar <c-vankar@ti.com> Link: https://patch.msgid.link/20250707085201.1898818-1-c-vankar@ti.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-01time/timecounter: Fix the lie that struct cyclecounter is constGreg Kroah-Hartman
In both the read callback for struct cyclecounter, and in struct timecounter, struct cyclecounter is declared as a const pointer. Unfortunatly, a number of users of this pointer treat it as a non-const pointer as it is burried in a larger structure that is heavily modified by the callback function when accessed. This lie had been hidden by the fact that container_of() "casts away" a const attribute of a pointer without any compiler warning happening at all. Fix this all up by removing the const attribute in the needed places so that everyone can see that the structure really isn't const, but can, and is, modified by the users of it. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/all/2025070124-backyard-hurt-783a@gregkh
2025-06-26net: ethernet: ti: am65-cpsw: fixup PHY mode for fixed RGMII TX delayMatthias Schiffer
All am65-cpsw controllers have a fixed TX delay, so the PHY interface mode must be fixed up to account for this. Modes that claim to a delay on the PCB can't actually work. Warn people to update their Device Trees if one of the unsupported modes is specified. Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com> Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Siddharth Vadapalli <s-vadapalli@ti.com> Link: https://patch.msgid.link/9b3fb1fbf719bef30702192155c6413cd5de5dcf.1750756583.git.matthias.schiffer@ew.tq-group.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-06-19net: ti: icssg-prueth: Add prp offload support to ICSSG driverHimanshu Mittal
Add support for ICSSG PRP mode which supports offloading of: - Packet duplication and PRP trailer insertion - Packet duplicate discard and PRP trailer removal Signed-off-by: Himanshu Mittal <h-mittal1@ti.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250618175536.430568-1-h-mittal1@ti.com Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR (net-6.16-rc3). No conflicts or adjacent changes. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-17net: ti: icssg-prueth: Fix packet handling for XDP_TXMeghana Malladi
While transmitting XDP frames for XDP_TX, page_pool is used to get the DMA buffers (already mapped to the pages) and need to be freed/reycled once the transmission is complete. This need not be explicitly done by the driver as this is handled more gracefully by the xdp driver while returning the xdp frame. __xdp_return() frees the XDP memory based on its memory type, under which page_pool memory is also handled. This change fixes the transmit queue timeout while running XDP_TX. logs: [ 309.069682] icssg-prueth icssg1-eth eth2: NETDEV WATCHDOG: CPU: 0: transmit queue 0 timed out 45860 ms [ 313.933780] icssg-prueth icssg1-eth eth2: NETDEV WATCHDOG: CPU: 0: transmit queue 0 timed out 50724 ms [ 319.053656] icssg-prueth icssg1-eth eth2: NETDEV WATCHDOG: CPU: 0: transmit queue 0 timed out 55844 ms ... Fixes: 62aa3246f462 ("net: ti: icssg-prueth: Add XDP support") Signed-off-by: Meghana Malladi <m-malladi@ti.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20250616063319.3347541-1-m-malladi@ti.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-14net: ti: icssg-prueth: Read firmware-names from device treeMD Danish Anwar
Refactor the way firmware names are handled for the ICSSG PRUETH driver. Instead of using hardcoded firmware name arrays for different modes (EMAC, SWITCH, HSR), the driver now reads the firmware names from the device tree property "firmware-name". Only the EMAC firmware names are specified in the device tree property. The firmware names for all other supported modes are generated dynamically based on the EMAC firmware names by replacing substrings (e.g., "eth" with "sw" or "hsr") as appropriate. Example: Below are the firmwares used currently for PRU0 core EMAC: ti-pruss/am65x-sr2-pru0-prueth-fw.elf SW : ti-pruss/am65x-sr2-pru0-prusw-fw.elf HSR : ti-pruss/am65x-sr2-pru0-pruhsr-fw.elf All three firmware names are same except for the operating mode. In general for PRU0 core, firmware name is, ti-pruss/am65x-sr2-pru0-pru<mode>-fw.elf Since the EMAC firmware names are defined in DT, driver will read those directly and for other modes swap the mode name. i.e. eth -> sw or eth -> hsr. This preserves backwards compatibility as ICSSG driver is supported only by AM65x and AM64x. Both of these have "firmware-name" property populated in their device tree. Signed-off-by: MD Danish Anwar <danishanwar@ti.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250613064547.44394-1-danishanwar@ti.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-08treewide, timers: Rename from_timer() to timer_container_of()Ingo Molnar
Move this API to the canonical timer_*() namespace. [ tglx: Redone against pre rc1 ] Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/all/aB2X0jCKQO56WdMt@gmail.com
2025-06-05net: ti: icssg-prueth: Fix swapped TX stats for MII interfaces.Meghana Malladi
In MII mode, Tx lines are swapped for port0 and port1, which means Tx port0 receives data from PRU1 and the Tx port1 receives data from PRU0. This is an expected hardware behavior and reading the Tx stats needs to be handled accordingly in the driver. Update the driver to read Tx stats from the PRU1 for port0 and PRU0 for port1. Fixes: c1e10d5dc7a1 ("net: ti: icssg-prueth: Add ICSSG Stats") Signed-off-by: Meghana Malladi <m-malladi@ti.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250603052904.431203-1-m-malladi@ti.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-05-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR (net-6.15-rc8). Conflicts: 80f2ab46c2ee ("irdma: free iwdev->rf after removing MSI-X") 4bcc063939a5 ("ice, irdma: fix an off by one in error handling code") c24a65b6a27c ("iidc/ice/irdma: Update IDC to support multiple consumers") https://lore.kernel.org/20250513130630.280ee6c5@canb.auug.org.au No extra adjacent changes. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-05-20net: ethernet: ti: am65-cpsw: Lower random mac address error print to infoNishanth Menon
Using random mac address is not an error since the driver continues to function, it should be informative that the system has not assigned a MAC address. This is inline with other drivers such as ax88796c, dm9051 etc. Drop the error level to info level. Signed-off-by: Nishanth Menon <nm@ti.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Roger Quadros <rogerq@kernel.org> Link: https://patch.msgid.link/20250516122655.442808-1-nm@ti.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-05-14net: cpsw: isolate cpsw_ndo_ioctl() to just the old driverVladimir Oltean
cpsw->slaves[slave_no].phy should be equal to netdev->phydev, because it is assigned from phy_attach_direct(). The latter is indirectly called from the two identically named cpsw_slave_open() functions, one in cpsw.c and another in cpsw_new.c. Thus, the driver should not need custom logic to find the PHY, the core can find it, and phy_do_ioctl_running() achieves exactly that. However, that is only the case for cpsw_new and for the cpsw driver in dual EMAC mode. This is explained in more detail in the previous commit. Thus, allow the simpler core logic to execute for cpsw_new, and move cpsw_ndo_ioctl() to cpsw.c. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://patch.msgid.link/20250512114422.4176010-2-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-05-14net: cpsw: convert to ndo_hwtstamp_get() and ndo_hwtstamp_set()Vladimir Oltean
New timestamping API was introduced in commit 66f7223039c0 ("net: add NDOs for configuring hardware timestamping") from kernel v6.6. It is time to convert the two cpsw drivers to the new API, so that the ndo_eth_ioctl() path can be removed completely. The cpsw_hwtstamp_get() and cpsw_hwtstamp_set() methods (and their shim definitions, for the case where CONFIG_TI_CPTS is not enabled) must have their prototypes adjusted. These methods are used by two drivers (cpsw and cpsw_new), with vastly different configurations: - cpsw has two operating modes: - "dual EMAC" - enabled through the "dual_emac" device tree property - creates one net_device per EMAC / slave interface (but there is no bridging offload) - "switch mode" - default - there is a single net_device, with two EMACs/slaves behind it (and switching between them happens unbeknownst to the network stack). - cpsw_new always registers one net_device for each EMAC which doesn't have status = "disabled". In terms of switching, it has two modes: - "dual EMAC": default, no switching between ports, no switchdev offload. - "switch mode": enabled through the "switch_mode" devlink parameter, offloads the Linux bridge through switchdev Essentially, in 3 out of 4 operating modes, there is a bijective relation between the net_device and the slave. Timestamping can thus be configured on individual slaves. But in the "switch mode" of the cpsw driver, ndo_eth_ioctl() targets a single slave, designated using the "active_slave" device tree property. To deal with these different cases, the common portion of the drivers, cpsw_priv.c, has the cpsw_slave_index() function pointer, set to separate, identically named cpsw_slave_index_priv() by the 2 drivers. This is all relevant because cpsw_ndo_ioctl() has the old-style phy_has_hwtstamp() logic which lets the PHY handle the timestamping ioctls. Normally, that logic should be obsoleted by the more complex logic in the core, which permits dynamically selecting the timestamp provider - see dev_set_hwtstamp_phylib(). But I have doubts as to how this works for the "switch mode" of the dual EMAC driver, because the core logic only engages if the PHY is visible through ndev->phydev (this is set by phy_attach_direct()). In cpsw.c, we have: cpsw_ndo_open() -> for_each_slave(priv, cpsw_slave_open, priv); // continues on errors -> of_phy_connect() -> phy_connect_direct() -> phy_attach_direct() OR -> phy_connect() -> phy_connect_direct() -> phy_attach_direct() The problem for "switch mode" is that the behavior of phy_attach_direct() called twice in a row for the same net_device (once for each slave) is probably undefined. For sure it will overwrite dev->phydev. I don't see any explicit error checks for this case, and even if there were, the for_each_slave() call makes them non-fatal to cpsw_ndo_open() anyway. I have no idea what is the extent to which this provides a usable result, but the point is: only the last attached PHY will be visible in dev->phydev, and this may well be a different PHY than cpsw->slaves[slave_no].phy for the "active_slave". In dual EMAC mode, as well as in cpsw_new, this should not be a problem. I don't know whether PHY timestamping is a use case for the cpsw "switch mode" as well, and I hope that there isn't, because for the sake of simplicity, I've decided to deliberately break that functionality, by refusing all PHY timestamping. Keeping it would mean blocking the old API from ever being removed. In the new dev_set_hwtstamp_phylib() API, it is not possible to operate on a phylib PHY other than dev->phydev, and I would very much prefer not adding that much complexity for bizarre driver decisions. Final point about the cpsw_hwtstamp_get() conversion: we don't need to propagate the unnecessary "config.flags = 0;", because dev_get_hwtstamp() provides a zero-initialized struct kernel_hwtstamp_config. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://patch.msgid.link/20250512114422.4176010-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-05-08Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR (net-6.15-rc6). No conflicts. Adjacent changes: net/core/dev.c: 08e9f2d584c4 ("net: Lock netdevices during dev_shutdown") a82dc19db136 ("net: avoid potential race between netdev_get_by_index_lock() and netns switch") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-05-07net: ti: icssg-prueth: Report BQL before sending XDP packetsMeghana Malladi
When sending out any kind of traffic, it is essential that the driver keeps reporting BQL of the number of bytes that have been sent so that BQL can track the amount of data in the queue and prevents it from overflowing. If BQL is not reported, the driver may continue sending packets even when the queue is full, leading to packet loss, congestion and decreased network performance. Currently this is missing in emac_xmit_xdp_frame() and this patch fixes it. Fixes: 62aa3246f462 ("net: ti: icssg-prueth: Add XDP support") Signed-off-by: Meghana Malladi <m-malladi@ti.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20250506110546.4065715-4-m-malladi@ti.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-05-07net: ti: icssg-prueth: Fix kernel panic during concurrent Tx queue accessMeghana Malladi
Add __netif_tx_lock() to ensure that only one packet is being transmitted at a time to avoid race conditions in the netif_txq struct and prevent packet data corruption. Failing to do so causes kernel panic with the following error: [ 2184.746764] ------------[ cut here ]------------ [ 2184.751412] kernel BUG at lib/dynamic_queue_limits.c:99! [ 2184.756728] Internal error: Oops - BUG: 00000000f2000800 [#1] PREEMPT SMP logs: https://gist.github.com/MeghanaMalladiTI/9c7aa5fc3b7fb03f87c74aad487956e9 The lock is acquired before calling emac_xmit_xdp_frame() and released after the call returns. This ensures that the TX queue is protected from concurrent access during the transmission of XDP frames. Fixes: 62aa3246f462 ("net: ti: icssg-prueth: Add XDP support") Signed-off-by: Meghana Malladi <m-malladi@ti.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20250506110546.4065715-3-m-malladi@ti.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-05-07net: ti: icssg-prueth: Set XDP feature flags for ndevMeghana Malladi
xdp_features demonstrates what all XDP capabilities are supported on a given network device. The driver needs to set these xdp_features flag to let the network stack know what XDP features a given driver is supporting. These flags need to be set for a given ndev irrespective of any XDP program being loaded or not. Fixes: 62aa3246f462 ("net: ti: icssg-prueth: Add XDP support") Signed-off-by: Meghana Malladi <m-malladi@ti.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20250506110546.4065715-2-m-malladi@ti.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-28net: ti: icssg-prueth: Add ICSSG FW StatsMD Danish Anwar
The ICSSG firmware maintains set of stats called PA_STATS. Currently the driver only dumps 4 stats. Add support for dumping more stats. The offset for different stats are defined as MACROs in icssg_switch_map.h file. All the offsets are for Slice0. Slice1 offsets are slice0 + 4. The offset calculation is taken care while reading the stats in emac_update_hardware_stats(). The statistics are documented in Documentation/networking/device_drivers/icssg_prueth.rst Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: MD Danish Anwar <danishanwar@ti.com> Link: https://patch.msgid.link/20250424095316.2643573-1-danishanwar@ti.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR (net-6.15-rc3). No conflicts. Adjacent changes: tools/net/ynl/pyynl/ynl_gen_c.py 4d07bbf2d456 ("tools: ynl-gen: don't declare loop iterator in place") 7e8ba0c7de2b ("tools: ynl: don't use genlmsghdr in classic netlink") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-17net: ti: icss-iep: Fix possible NULL pointer dereference for perout requestMeghana Malladi
The ICSS IEP driver tracks perout and pps enable state with flags. Currently when disabling pps and perout signals during icss_iep_exit(), results in NULL pointer dereference for perout. To fix the null pointer dereference issue, the icss_iep_perout_enable_hw function can be modified to directly clear the IEP CMP registers when disabling PPS or PEROUT, without referencing the ptp_perout_request structure, as its contents are irrelevant in this case. Fixes: 9b115361248d ("net: ti: icssg-prueth: Fix clearing of IEP_CMP_CFG registers during iep_init") Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Closes: https://lore.kernel.org/all/7b1c7c36-363a-4085-b26c-4f210bee1df6@stanley.mountain/ Signed-off-by: Meghana Malladi <m-malladi@ti.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20250415090543.717991-4-m-malladi@ti.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-04-17net: ti: icssg-prueth: Fix possible NULL pointer dereference inside ↵Meghana Malladi
emac_xmit_xdp_frame() There is an error check inside emac_xmit_xdp_frame() function which is called when the driver wants to transmit XDP frame, to check if the allocated tx descriptor is NULL, if true to exit and return ICSSG_XDP_CONSUMED implying failure in transmission. In this case trying to free a descriptor which is NULL will result in kernel crash due to NULL pointer dereference. Fix this error handling and increase netdev tx_dropped stats in the caller of this function if the function returns ICSSG_XDP_CONSUMED. Fixes: 62aa3246f462 ("net: ti: icssg-prueth: Add XDP support") Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Closes: https://lore.kernel.org/all/70d8dd76-0c76-42fc-8611-9884937c82f5@stanley.mountain/ Signed-off-by: Meghana Malladi <m-malladi@ti.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Roger Quadros <rogerq@kernel.org> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20250415090543.717991-3-m-malladi@ti.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-04-17net: ti: icssg-prueth: Fix kernel warning while bringing down network interfaceMeghana Malladi
During network interface initialization, the NIC driver needs to register its Rx queue with the XDP, to ensure the incoming XDP buffer carries a pointer reference to this info and is stored inside xdp_rxq_info. While this struct isn't tied to XDP prog, if there are any changes in Rx queue, the NIC driver needs to stop the Rx queue by unregistering with XDP before purging and reallocating memory. Drop page_pool destroy during Rx channel reset as this is already handled by XDP during xdp_rxq_info_unreg (Rx queue unregister), failing to do will cause the following warning: warning logs: https://gist.github.com/MeghanaMalladiTI/eb627e5dc8de24e42d7d46572c13e576 Fixes: 46eeb90f03e0 ("net: ti: icssg-prueth: Use page_pool API for RX buffer allocation") Signed-off-by: Meghana Malladi <m-malladi@ti.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Roger Quadros <rogerq@kernel.org> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20250415090543.717991-2-m-malladi@ti.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-04-16net: ethernet: ti: am65-cpsw: handle -EPROBE_DEFERMichael Walle
of_get_mac_address() might fetch the MAC address from NVMEM and that driver might not have been loaded. In that case, -EPROBE_DEFER is returned. Right now, this will trigger an immediate fallback to am65_cpsw_am654_get_efuse_macid() possibly resulting in a random MAC address although the MAC address is stored in the referenced NVMEM. Fix it by handling the -EPROBE_DEFER return code correctly. This also means that the creation of the MDIO device has to be moved to a later stage as -EPROBE_DEFER must not be returned after child devices are created. Signed-off-by: Michael Walle <mwalle@kernel.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/20250414084336.4017237-3-mwalle@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-16net: ethernet: ti: am65-cpsw: set fwnode for portsMichael Walle
fwnode needs to be set for a device for fw_devlink to be able to track/enforce its dependencies correctly. Without this, you'll see error messages like this when the supplier has probed and tries to make sure all its fwnode consumers are linked to it using device links: am65-cpsw-nuss 8000000.ethernet: Failed to create device link (0x180) with supplier .. Reviewed-by: Saravana Kannan <saravanak@google.com> Signed-off-by: Michael Walle <mwalle@kernel.org> Link: https://patch.msgid.link/20250414084336.4017237-2-mwalle@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-15net: ethernet: ti: am65-cpsw: fix port_np reference countingMichael Walle
A reference to the device tree node is stored in a private struct, thus the reference count has to be incremented. Also, decrement the count on device removal and in the error path. Fixes: 93a76530316a ("net: ethernet: ti: introduce am65x/j721e gigabit eth subsystem driver") Signed-off-by: Michael Walle <mwalle@kernel.org> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250414083942.4015060-1-mwalle@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR (net-6.15-rc2). Conflict: Documentation/networking/netdevices.rst net/core/lock_debug.c 04efcee6ef8d ("net: hold instance lock during NETDEV_CHANGE") 03df156dd3a6 ("xdp: double protect netdev->xdp_flags with netdev->lock") No adjacent changes. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit v1.2.3 (git 2.0.4) at 2025-11-18 02:19:32 +0000