summaryrefslogtreecommitdiff
path: root/drivers/nfc
AgeCommit message (Collapse)Author
4 daysnfc: pn533: allocate rx skb before consuming bytesPengpeng Hou
pn532_receive_buf() reports the number of accepted bytes to the serdev core. The current code consumes bytes into recv_skb and may already hand a complete frame to pn533_recv_frame() before allocating a fresh receive buffer. If that alloc_skb() fails, the callback returns 0 even though it has already consumed bytes, and it leaves recv_skb as NULL for the next receive callback. That breaks the receive_buf() accounting contract and can also lead to a NULL dereference on the next skb_put_u8(). Allocate the receive skb lazily before consuming the next byte instead. If allocation fails, return the number of bytes already accepted. Fixes: c656aa4c27b1 ("nfc: pn533: add UART phy driver") Cc: stable@vger.kernel.org Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn> Link: https://patch.msgid.link/20260405094003.3-pn533-v2-pengpeng@iscas.ac.cn Signed-off-by: Paolo Abeni <pabeni@redhat.com>
10 daysnfc: s3fwrn5: allocate rx skb before consuming bytesPengpeng Hou
s3fwrn82_uart_read() reports the number of accepted bytes to the serdev core. The current code consumes bytes into recv_skb and may already deliver a complete frame before allocating a fresh receive buffer. If that alloc_skb() fails, the callback returns 0 even though it has already consumed bytes, and it leaves recv_skb as NULL for the next receive callback. That breaks the receive_buf() accounting contract and can also lead to a NULL dereference on the next skb_put_u8(). Allocate the receive skb lazily before consuming the next byte instead. If allocation fails, return the number of bytes already accepted. Fixes: 3f52c2cb7e3a ("nfc: s3fwrn5: Support a UART interface") Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn> Link: https://patch.msgid.link/20260402042148.65236-1-pengpeng@iscas.ac.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org>
13 daysNFC: pn533: bound the UART receive bufferPengpeng Hou
pn532_receive_buf() appends every incoming byte to dev->recv_skb and only resets the buffer after pn532_uart_rx_is_frame() recognizes a complete frame. A continuous stream of bytes without a valid PN532 frame header therefore keeps growing the skb until skb_put_u8() hits the tail limit. Drop the accumulated partial frame once the fixed receive buffer is full so malformed UART traffic cannot grow the skb past PN532_UART_SKB_BUFF_LEN. Fixes: c656aa4c27b1 ("nfc: pn533: add UART phy driver") Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn> Link: https://patch.msgid.link/20260326142033.82297-1-pengpeng@iscas.ac.cn Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2026-03-18NFC: nxp-nci: allow GPIOs to sleepIan Ray
Allow the firmware and enable GPIOs to sleep. This fixes a `WARN_ON' and allows the driver to operate GPIOs which are connected to I2C GPIO expanders. -- >8 -- kernel: WARNING: CPU: 3 PID: 2636 at drivers/gpio/gpiolib.c:3880 gpiod_set_value+0x88/0x98 -- >8 -- Fixes: 43201767b44c ("NFC: nxp-nci: Convert to use GPIO descriptor") Cc: stable@vger.kernel.org Signed-off-by: Ian Ray <ian.ray@gehealthcare.com> Link: https://patch.msgid.link/20260317085337.146545-1-ian.ray@gehealthcare.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-02-26Merge tag 'net-7.0-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Paolo Abeni: "Including fixes from IPsec, Bluetooth and netfilter Current release - regressions: - wifi: fix dev_alloc_name() return value check - rds: fix recursive lock in rds_tcp_conn_slots_available Current release - new code bugs: - vsock: lock down child_ns_mode as write-once Previous releases - regressions: - core: - do not pass flow_id to set_rps_cpu() - consume xmit errors of GSO frames - netconsole: avoid OOB reads, msg is not nul-terminated - netfilter: h323: fix OOB read in decode_choice() - tcp: re-enable acceptance of FIN packets when RWIN is 0 - udplite: fix null-ptr-deref in __udp_enqueue_schedule_skb(). - wifi: brcmfmac: fix potential kernel oops when probe fails - phy: register phy led_triggers during probe to avoid AB-BA deadlock - eth: - bnxt_en: fix deleting of Ntuple filters - wan: farsync: fix use-after-free bugs caused by unfinished tasklets - xscale: check for PTP support properly Previous releases - always broken: - tcp: fix potential race in tcp_v6_syn_recv_sock() - kcm: fix zero-frag skb in frag_list on partial sendmsg error - xfrm: - fix race condition in espintcp_close() - always flush state and policy upon NETDEV_UNREGISTER event - bluetooth: - purge error queues in socket destructors - fix response to L2CAP_ECRED_CONN_REQ - eth: - mlx5: - fix circular locking dependency in dump - fix "scheduling while atomic" in IPsec MAC address query - gve: fix incorrect buffer cleanup for QPL - team: avoid NETDEV_CHANGEMTU event when unregistering slave - usb: validate USB endpoints" * tag 'net-7.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (72 commits) netfilter: nf_conntrack_h323: fix OOB read in decode_choice() dpaa2-switch: validate num_ifs to prevent out-of-bounds write net: consume xmit errors of GSO frames vsock: document write-once behavior of the child_ns_mode sysctl vsock: lock down child_ns_mode as write-once selftests/vsock: change tests to respect write-once child ns mode net/mlx5e: Fix "scheduling while atomic" in IPsec MAC address query net/mlx5: Fix missing devlink lock in SRIOV enable error path net/mlx5: E-switch, Clear legacy flag when moving to switchdev net/mlx5: LAG, disable MPESW in lag_disable_change() net/mlx5: DR, Fix circular locking dependency in dump selftests: team: Add a reference count leak test team: avoid NETDEV_CHANGEMTU event when unregistering slave net: mana: Fix double destroy_workqueue on service rescan PCI path MAINTAINERS: Update maintainer entry for QUALCOMM ETHQOS ETHERNET DRIVER dpll: zl3073x: Remove redundant cleanup in devm_dpll_init() selftests/net: packetdrill: Verify acceptance of FIN packets when RWIN is 0 tcp: re-enable acceptance of FIN packets when RWIN is 0 vsock: Use container_of() to get net namespace in sysctl handlers net: usb: kaweth: validate USB endpoints ...
2026-02-25nfc: pn533: properly drop the usb interface reference on disconnectGreg Kroah-Hartman
When the device is disconnected from the driver, there is a "dangling" reference count on the usb interface that was grabbed in the probe callback. Fix this up by properly dropping the reference after we are done with it. Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Simon Horman <horms@kernel.org> Fixes: c46ee38620a2 ("NFC: pn533: add NXP pn533 nfc device driver") Link: https://patch.msgid.link/2026022329-flashing-ought-7573@gregkh Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-02-21Convert 'alloc_obj' family to use the new default GFP_KERNEL argumentLinus Torvalds
This was done entirely with mindless brute force, using git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' | xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/' to convert the new alloc_obj() users that had a simple GFP_KERNEL argument to just drop that argument. Note that due to the extreme simplicity of the scripting, any slightly more complex cases spread over multiple lines would not be triggered: they definitely exist, but this covers the vast bulk of the cases, and the resulting diff is also then easier to check automatically. For the same reason the 'flex' versions will be done as a separate conversion. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2026-02-21treewide: Replace kmalloc with kmalloc_obj for non-scalar typesKees Cook
This is the result of running the Coccinelle script from scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to avoid scalar types (which need careful case-by-case checking), and instead replace kmalloc-family calls that allocate struct or union object instances: Single allocations: kmalloc(sizeof(TYPE), ...) are replaced with: kmalloc_obj(TYPE, ...) Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...) are replaced with: kmalloc_objs(TYPE, COUNT, ...) Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...) are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...) (where TYPE may also be *VAR) The resulting allocations no longer return "void *", instead returning "TYPE *". Signed-off-by: Kees Cook <kees@kernel.org>
2026-02-06nfc: nxp-nci: remove interrupt trigger typeCarl Lee
For NXP NCI devices (e.g. PN7150), the interrupt is level-triggered and active high, not edge-triggered. Using IRQF_TRIGGER_RISING in the driver can cause interrupts to fail to trigger correctly. Remove IRQF_TRIGGER_RISING and rely on the IRQ trigger type configured via Device Tree. Signed-off-by: Carl Lee <carl.lee@amd.com> Link: https://patch.msgid.link/20260205-fc-nxp-nci-remove-interrupt-trigger-type-v2-1-79d2ed4a7e42@amd.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-01-17Revert "nfc/nci: Add the inconsistency check between the input data length ↵Thadeu Lima de Souza Cascardo
and count" This reverts commit 068648aab72c9ba7b0597354ef4d81ffaac7b979. NFC packets may have NUL-bytes. Checking for string length is not a correct assumption here. As long as there is a check for the length copied from copy_from_user, all should be fine. The fix only prevented the syzbot reproducer from triggering the bug because the packet is not enqueued anymore and the code that triggers the bug is not exercised. The fix even broke testing/selftests/nci/nci_dev, making all tests there fail. After the revert, 6 out of 8 tests pass. Fixes: 068648aab72c ("nfc/nci: Add the inconsistency check between the input data length and count") Cc: stable@vger.kernel.org Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com> Link: https://patch.msgid.link/20260113202458.449455-1-cascardo@igalia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-12-11nfc: pn533: Fix error code in pn533_acr122_poweron_rdr()Dan Carpenter
Set the error code if "transferred != sizeof(cmd)" instead of returning success. Fixes: dbafc28955fa ("NFC: pn533: don't send USB data off of the stack") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Link: https://patch.msgid.link/aTfIJ9tZPmeUF4W1@stanley.mountain Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-11-17NFC: mei_phy: fix kernel-doc warningsRandy Dunlap
Fix kernel-doc warnings in mei_phy.h to avoid build warnings and to improve and documentation: mei_phy.h:15: warning: missing initial short description on line: * struct nfc_mei_phy mei_phy.h:19: warning: bad line: Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://patch.msgid.link/20251116070959.85055-1-rdunlap@infradead.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-08-18nfc: s3fwrn5: Use SHA-1 library instead of crypto_shashEric Biggers
Now that a SHA-1 library API is available, use it instead of crypto_shash. This is simpler and faster. Signed-off-by: Eric Biggers <ebiggers@kernel.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://patch.msgid.link/20250815022329.28672-1-ebiggers@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-08-14nfc: pn533: Delete an unnecessary checkDan Carpenter
The "rc" variable is set like this: if (IS_ERR(resp)) { rc = PTR_ERR(resp); We know that "rc" is negative so there is no need to check. Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://patch.msgid.link/aJwn2ox5g9WsD2Vx@stanley.mountain Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-27NFC: trf7970a: Create device-tree parameter for RX gain reductionPaul Geurts
The TRF7970a device is sensitive to RF disturbances, which can make it hard to pass some EMC immunity tests. By reducing the RX antenna gain, the device becomes less sensitive to EMC disturbances, as a trade-off against antenna performance. Add a device tree option to select RX gain reduction to improve EMC performance. Selecting a communication standard in the ISO control register resets the RX antenna gain settings. Therefore set the RX gain reduction everytime the ISO control register changes, when the option is used. Signed-off-by: Paul Geurts <paul.geurts@prodrive-technologies.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://patch.msgid.link/20250626141242.3749958-3-paul.geurts@prodrive-technologies.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-08treewide, timers: Rename from_timer() to timer_container_of()Ingo Molnar
Move this API to the canonical timer_*() namespace. [ tglx: Redone against pre rc1 ] Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/all/aB2X0jCKQO56WdMt@gmail.com
2025-05-21nfc: Correct Samsung "Electronics" spelling in copyright headersSumanth Gavini
Fix the misspelling of "Electronics" in copyright headers across: - s3fwrn5 driver - virtual_ncidev driver Signed-off-by: Sumanth Gavini <sumanth.gavini@yahoo.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://patch.msgid.link/20250520072119.176018-1-sumanth.gavini@yahoo.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-05treewide: Switch/rename to timer_delete[_sync]()Thomas Gleixner
timer_delete[_sync]() replaces del_timer[_sync](). Convert the whole tree over and remove the historical wrapper inlines. Conversion was done with coccinelle plus manual fixups where necessary. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2025-01-18nfc: mrvl: Don't use "proxy" headersAndy Shevchenko
Update header inclusions to follow IWYU (Include What You Use) principle. In this case replace of_gpio.h, which is subject to remove by the GPIOLIB subsystem, with the respective headers that are being used by the driver. Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://patch.msgid.link/20250116153119.148097-1-andriy.shevchenko@linux.intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-18nfc: st21nfca: Remove unused of_gpio.hAndy Shevchenko
of_gpio.h is deprecated and subject to remove. The drivers in question don't use it, simply remove the unused header. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-06nfc: st21nfca: Drop unneeded null check in st21nfca_tx_work()Krzysztof Kozlowski
Variable 'info' is obtained via container_of() of struct work_struct, so it cannot be NULL. Simplify the code and solve Smatch warning: drivers/nfc/st21nfca/dep.c:119 st21nfca_tx_work() warn: can 'info' even be NULL? Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250104142043.116045-1-krzysztof.kozlowski@linaro.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-10-02move asm/unaligned.h to linux/unaligned.hAl Viro
asm/unaligned.h is always an include of asm-generic/unaligned.h; might as well move that thing to linux/unaligned.h and include that - there's nothing arch-specific in that header. auto-generated by the following: for i in `git grep -l -w asm/unaligned.h`; do sed -i -e "s/asm\/unaligned.h/linux\/unaligned.h/" $i done for i in `git grep -l -w asm-generic/unaligned.h`; do sed -i -e "s/asm-generic\/unaligned.h/linux\/unaligned.h/" $i done git mv include/asm-generic/unaligned.h include/linux/unaligned.h git mv tools/include/asm-generic/unaligned.h tools/include/linux/unaligned.h sed -i -e "/unaligned.h/d" include/asm-generic/Kbuild sed -i -e "s/__ASM_GENERIC/__LINUX/" include/linux/unaligned.h tools/include/linux/unaligned.h
2024-08-29Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR. Conflicts: drivers/net/ethernet/faraday/ftgmac100.c 4186c8d9e6af ("net: ftgmac100: Ensure tx descriptor updates are visible") e24a6c874601 ("net: ftgmac100: Get link speed and duplex for NC-SI") https://lore.kernel.org/0b851ec5-f91d-4dd3-99da-e81b98c9ed28@kernel.org net/ipv4/tcp.c bac76cf89816 ("tcp: fix forever orphan socket caused by tcp_abort") edefba66d929 ("tcp: rstreason: introduce SK_RST_REASON_TCP_STATE for active reset") https://lore.kernel.org/20240828112207.5c199d41@canb.auug.org.au No adjacent changes. Link: https://patch.msgid.link/20240829130829.39148-1-pabeni@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-29nfc: pn533: Add poll mod list filling checkAleksandr Mishin
In case of im_protocols value is 1 and tm_protocols value is 0 this combination successfully passes the check 'if (!im_protocols && !tm_protocols)' in the nfc_start_poll(). But then after pn533_poll_create_mod_list() call in pn533_start_poll() poll mod list will remain empty and dev->poll_mod_count will remain 0 which lead to division by zero. Normally no im protocol has value 1 in the mask, so this combination is not expected by driver. But these protocol values actually come from userspace via Netlink interface (NFC_CMD_START_POLL operation). So a broken or malicious program may pass a message containing a "bad" combination of protocol parameter values so that dev->poll_mod_count is not incremented inside pn533_poll_create_mod_list(), thus leading to division by zero. Call trace looks like: nfc_genl_start_poll() nfc_start_poll() ->start_poll() pn533_start_poll() Add poll mod list filling check. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: dfccd0f58044 ("NFC: pn533: Add some polling entropy") Signed-off-by: Aleksandr Mishin <amishin@t-argos.ru> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://patch.msgid.link/20240827084822.18785-1-amishin@t-argos.ru Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-08-21nfc: pn533: Avoid -Wflex-array-member-not-at-end warningsGustavo A. R. Silva
-Wflex-array-member-not-at-end was introduced in GCC-14, and we are getting ready to enable it, globally. Remove unnecessary flex-array member `data[]`, and with this fix the following warnings: drivers/nfc/pn533/usb.c:268:38: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end] drivers/nfc/pn533/usb.c:275:38: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end] Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/ZsPw7+6vNoS651Cb@elsanto Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-07-28minmax: make generic MIN() and MAX() macros available everywhereLinus Torvalds
This just standardizes the use of MIN() and MAX() macros, with the very traditional semantics. The goal is to use these for C constant expressions and for top-level / static initializers, and so be able to simplify the min()/max() macros. These macro names were used by various kernel code - they are very traditional, after all - and all such users have been fixed up, with a few different approaches: - trivial duplicated macro definitions have been removed Note that 'trivial' here means that it's obviously kernel code that already included all the major kernel headers, and thus gets the new generic MIN/MAX macros automatically. - non-trivial duplicated macro definitions are guarded with #ifndef This is the "yes, they define their own versions, but no, the include situation is not entirely obvious, and maybe they don't get the generic version automatically" case. - strange use case #1 A couple of drivers decided that the way they want to describe their versioning is with #define MAJ 1 #define MIN 2 #define DRV_VERSION __stringify(MAJ) "." __stringify(MIN) which adds zero value and I just did my Alexander the Great impersonation, and rewrote that pointless Gordian knot as #define DRV_VERSION "1.2" instead. - strange use case #2 A couple of drivers thought that it's a good idea to have a random 'MIN' or 'MAX' define for a value or index into a table, rather than the traditional macro that takes arguments. These values were re-written as C enum's instead. The new function-line macros only expand when followed by an open parenthesis, and thus don't clash with enum use. Happily, there weren't really all that many of these cases, and a lot of users already had the pattern of using '#ifndef' guarding (or in one case just using '#undef MIN') before defining their own private version that does the same thing. I left such cases alone. Cc: David Laight <David.Laight@aculab.com> Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2024-06-20nfc: Drop explicit initialization of struct i2c_device_id::driver_data to 0Uwe Kleine-König
These drivers don't use the driver_data member of struct i2c_device_id, so don't explicitly initialize this member. This prepares putting driver_data in an anonymous union which requires either no initialization or named designators. But it's also a nice cleanup on its own. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://patch.msgid.link/20240619195631.2545407-2-u.kleine-koenig@baylibre.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-29nfc/nci: Add the inconsistency check between the input data length and countEdward Adam Davis
write$nci(r0, &(0x7f0000000740)=ANY=[@ANYBLOB="610501"], 0xf) Syzbot constructed a write() call with a data length of 3 bytes but a count value of 15, which passed too little data to meet the basic requirements of the function nci_rf_intf_activated_ntf_packet(). Therefore, increasing the comparison between data length and count value to avoid problems caused by inconsistent data length and count. Reported-and-tested-by: syzbot+71bfed2b2bcea46c98f2@syzkaller.appspotmail.com Signed-off-by: Edward Adam Davis <eadavis@qq.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-04-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR. Conflicts: drivers/net/ethernet/ti/icssg/icssg_prueth.c net/mac80211/chan.c 89884459a0b9 ("wifi: mac80211: fix idle calculation with multi-link") 87f5500285fb ("wifi: mac80211: simplify ieee80211_assign_link_chanctx()") https://lore.kernel.org/all/20240422105623.7b1fbda2@canb.auug.org.au/ net/unix/garbage.c 1971d13ffa84 ("af_unix: Suppress false-positive lockdep splat for spin_lock() in __unix_gc().") 4090fa373f0e ("af_unix: Replace garbage collection algorithm.") drivers/net/ethernet/ti/icssg/icssg_prueth.c drivers/net/ethernet/ti/icssg/icssg_common.c 4dcd0e83ea1d ("net: ti: icssg-prueth: Fix signedness bug in prueth_init_rx_chns()") e2dc7bfd677f ("net: ti: icssg-prueth: Move common functions into a separate file") No adjacent changes. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-22NFC: trf7970a: disable all regulators on removalPaul Geurts
During module probe, regulator 'vin' and 'vdd-io' are used and enabled, but the vdd-io regulator overwrites the 'vin' regulator pointer. During remove, only the vdd-io is disabled, as the vin regulator pointer is not available anymore. When regulator_put() is called during resource cleanup a kernel warning is given, as the regulator is still enabled. Store the two regulators in separate pointers and disable both the regulators on module remove. Fixes: 49d22c70aaf0 ("NFC: trf7970a: Add device tree option of 1.8 Volt IO voltage") Signed-off-by: Paul Geurts <paul_geurts@live.nl> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/DB7PR09MB26847A4EBF88D9EDFEB1DA0F950E2@DB7PR09MB2684.eurprd09.prod.outlook.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-03-29nfc: st95hf: drop driver owner assignmentKrzysztof Kozlowski
Core in spi_register_driver() already sets the .owner, so driver does not need to. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20240327174810.519676-4-krzysztof.kozlowski@linaro.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-03-29nfc: mrvl: spi: drop driver owner assignmentKrzysztof Kozlowski
Core in spi_register_driver() already sets the .owner, so driver does not need to. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20240327174810.519676-3-krzysztof.kozlowski@linaro.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-03-29nfc: st95hf: Switch to using gpiod APIAndy Shevchenko
This updates the driver to gpiod API, and removes yet another use of of_get_named_gpio(). Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20240326175836.1418718-1-andriy.shevchenko@linux.intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-27treewide, serdev: change receive_buf() return type to size_tFrancesco Dolcini
receive_buf() is called from ttyport_receive_buf() that expects values ">= 0" from serdev_controller_receive_buf(), change its return type from ssize_t to size_t. The need for this clean-up was noticed while fixing a warning, see commit 94d053942544 ("Bluetooth: btnxpuart: fix recv_buf() return value"). Changing the callback prototype to return an unsigned seems the best way to document the API and ensure that is properly used. GNSS drivers implementation of serdev receive_buf() callback return directly the return value of gnss_insert_raw(). gnss_insert_raw() returns a signed int, however this is not an issue since the value returned is always positive, because of the kfifo_in() implementation. gnss_insert_raw() could be changed to return also an unsigned, however this is not implemented here as request by the GNSS maintainer Johan Hovold. Suggested-by: Jiri Slaby <jirislaby@kernel.org> Link: https://lore.kernel.org/all/087be419-ec6b-47ad-851a-5e1e3ea5cfcc@kernel.org/ Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> #for-iio Reviewed-by: Johan Hovold <johan@kernel.org> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Alex Elder <elder@linaro.org> Acked-by: Maximilian Luz <luzmaximilian@gmail.com> # for platform/surface Acked-by: Lee Jones <lee@kernel.org> Acked-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20240122180551.34429-1-francesco@dolcini.it Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-11Merge 6.7-rc5 into tty-nextGreg Kroah-Hartman
We need the serial fixes in here as well to build off of. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-08tty: serdev: convert to u8 and size_tJiri Slaby (SUSE)
Switch character types to u8 and sizes to size_t. To conform to characters/sizes in the rest of the tty layer. This patch converts struct serdev_device_ops hooks and its instantiations. Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org> Cc: Rob Herring <robh@kernel.org> Acked-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20231206073712.17776-24-jirislaby@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-11-22nfc: virtual_ncidev: Add variable to check if ndev is runningNguyen Dinh Phi
syzbot reported an memory leak that happens when an skb is add to send_buff after virtual nci closed. This patch adds a variable to track if the ndev is running before handling new skb in send function. Signed-off-by: Nguyen Dinh Phi <phind.uet@gmail.com> Reported-by: syzbot+6eb09d75211863f15e3e@syzkaller.appspotmail.com Closes: https://lore.kernel.org/lkml/00000000000075472b06007df4fb@google.com Reviewed-by: Bongsu Jeon Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-30NFC: nxp: add NXP1002Oliver Neukum
It is backwards compatible Signed-off-by: Oliver Neukum <oneukum@suse.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230829084717.961-1-oneukum@suse.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-16nfc: virtual_ncidev: Use module_misc_device macro to simplify the codeLi Zetao
Use the module_misc_device macro to simplify the code, which is the same as declaring with module_init() and module_exit(). Signed-off-by: Li Zetao <lizetao1@huawei.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-06-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR. Conflicts: tools/testing/selftests/net/fcnal-test.sh d7a2fc1437f7 ("selftests: net: fcnal-test: check if FIPS mode is enabled") dd017c72dde6 ("selftests: fcnal: Test SO_DONTROUTE on TCP sockets.") https://lore.kernel.org/all/5007b52c-dd16-dbf6-8d64-b9701bfa498b@tessares.net/ https://lore.kernel.org/all/20230619105427.4a0df9b3@canb.auug.org.au/ No adjacent changes. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-18nfc: fdp: Add MODULE_FIRMWARE macrosJuerg Haefliger
The module loads firmware so add MODULE_FIRMWARE macros to provide that information via modinfo. Signed-off-by: Juerg Haefliger <juerg.haefliger@canonical.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-06-12nfc: nxp-nci: store __be16 value in __be16 variableSimon Horman
Use a __be16 variable to store the big endian value of header in nxp_nci_i2c_fw_read(). Flagged by Sparse as: .../i2c.c:113:22: warning: cast to restricted __be16 No functional changes intended. Compile tested only. Signed-off-by: Simon Horman <horms@kernel.org> Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-06-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR. No conflicts. Adjacent changes: drivers/net/ethernet/sfc/tc.c 622ab656344a ("sfc: fix error unwinds in TC offload") b6583d5e9e94 ("sfc: support TC decap rules matching on enc_src_port") net/mptcp/protocol.c 5b825727d087 ("mptcp: add annotations around msk->subflow accesses") e76c8ef5cc5b ("mptcp: refactor mptcp_stream_accept()") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-05-26nfcsim.c: Fix error checking for debugfs_create_dirOsama Muhammad
This patch fixes the error checking in nfcsim.c. The DebugFS kernel API is developed in a way that the caller can safely ignore the errors that occur during the creation of DebugFS nodes. Signed-off-by: Osama Muhammad <osmtendev@gmail.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-05-22nfc: Switch i2c drivers back to use .probe()Uwe Kleine-König
After commit b8a1a4cd5a98 ("i2c: Provide a temporary .probe_new() call-back type"), all drivers being converted to .probe_new() and then 03c835f498b5 ("i2c: Switch .probe() to not take an id parameter") convert back to (the new) .probe() to be able to eventually drop .probe_new() from struct i2c_driver. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-24drivers: nfc: nfcsim: remove return value check of `dev_dir`Jianuo Kuang
Smatch complains that: nfcsim_debugfs_init_dev() warn: 'dev_dir' is an error pointer or valid According to the documentation of the debugfs_create_dir() function, there is no need to check the return value of this function. Just delete the dead code. Signed-off-by: Jianuo Kuang <u202110722@hust.edu.cn> Reviewed-by: Dongliang Mu <dzm91@hust.edu.cn> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230424024140.34607-1-u202110722@hust.edu.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
net/wireless/nl80211.c b27f07c50a73 ("wifi: nl80211: fix puncturing bitmap policy") cbbaf2bb829b ("wifi: nl80211: add a command to enable/disable HW timestamping") https://lore.kernel.org/all/20230314105421.3608efae@canb.auug.org.au tools/testing/selftests/net/Makefile 62199e3f1658 ("selftests: net: Add VXLAN MDB test") 13715acf8ab5 ("selftest: Add test for bind() conflicts.") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-16nfc: mrvl: Use of_property_read_bool() for boolean propertiesRob Herring
It is preferred to use typed property access functions (i.e. of_property_read_<type> functions) rather than low-level of_get_property/of_find_property functions for reading properties. Convert reading boolean properties to of_property_read_bool(). Reviewed-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-16nfc: mrvl: Move platform_data struct into driverRob Herring
There are no users of nfcmrvl platform_data struct outside of the driver and none will be added, so move it into the driver. Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-15nfc: trf7970a: mark OF related data as maybe unusedKrzysztof Kozlowski
The driver can be compile tested with !CONFIG_OF making certain data unused: drivers/nfc/trf7970a.c:2232:34: error: ‘trf7970a_of_match’ defined but not used [-Werror=unused-const-variable=] Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: Mark Greer <mgreer@animalcreek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.0.4) at 2026-04-13 20:32:33 +0000