summaryrefslogtreecommitdiff
path: root/drivers/pci/controller/dwc
AgeCommit message (Collapse)Author
2026-11-05treewide: Convert devm_kmalloc() family to the devm_kmalloc_obj() familyKees Cook
Mirroring the earlier kmalloc_obj() conversion, convert the device-managed allocators over to the type-based API using the now updated scripts/coccinelle/api/kmalloc_objs.cocci. The size is derived from the type rather than written out as a sizeof(), and the result is a pointer to that type rather than void *, so a mismatch between the size requested and the variable assigned becomes a build error instead of being silently accepted. The conversions break down as: 6713 devm_kzalloc_obj() 1749 devm_kzalloc_objs() 307 devm_kzalloc_flex() 91 devm_kmalloc_objs() 82 devm_kmalloc_obj() 2 devm_kmalloc_flex() The rules deliberately leave alone allocations sized by a string or a byte-sized type, or assigned to a pointer to a byte-sized type, since those are byte buffers rather than objects. Allocations sized by a multi-byte integer type are only converted when they are assigned to a pointer to that same type, and allocations of pointers to integers or of void pointers are left alone too. After this change, 528 files still call devm_kmalloc(), devm_kzalloc(), devm_kcalloc(), or devm_kmalloc_array(). Build tested with allmodconfig on x86_64, arm64, i386, arm, riscv, s390, m68k, mips, parisc, sparc, loongarch, arc, xtensa, and openrisc with GCC 16.2.0 with no new warnings. Signed-off-by: Kees Cook <kees+treewide@kernel.org>
2026-10-28Merge tag 'dmaengine-7.4-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine Pull dmaengine updates from Vinod Koul: "This consists of start of work for hiding dmaengine internals and adding new APIs for dmaengine calls. Also couple of drivers and device and lot of updates esp AI-assisted improvements to drivers. Core: - Better document descriptor flags and clarify ordering rules around cookie completion - New APIs to start hiding dmaengine guts so that we can start making them internal New Support: - Nord and Maili GPI DMAengine support - DW axi dma updates and support for UltraRISC DP1000 controller - Apple M3 generation ADMACs support - Amlogic A9 SoC DMA controller driver - Sun6i refactoring and support for Allwinner A733 DMA controller Updates: - Freescale device_prep_peripheral_dma_vec support and dynamic scatter/gather chaining - TI crossbar and cppi DT schema conversion - zynqmp driver updates for error patch handling - Link list handling improvements for DW edma driver - ST dma40 improvements and corner case handling" * tag 'dmaengine-7.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (149 commits) dmaengine: amlogic: Fix regmap error check issue dmaengine: ste_dma40: Preserve the LCPA I/O address space docs: dmaengine: clarify ordering rules around cookie completion dmaengine: move driver-private helpers out of include/linux/dmaengine.h dmaengine: add dmaengine_desc_set_callback() helper dmaengine: add dmaengine_get_provider_device() API dmaengine: add dmaengine_get_max_xor() helper dmaengine: add dmaengine_get_cap_mask() and dmaengine_has_cap() helpers dmaengine: add dmaengine_get_copy_align() and related alignment getter helpers dmaengine: add dmaengine_is_*_aligned() helpers for DMA consumers dmaengine: add dmaengine_prep_dma_(pq|pq_val|interrupt|xor)() API dmaengine: sh: rcar-dmac: Add support for R-Car Gen5 SoCs dt-bindings: renesas,rcar-dmac: Add support for R-Car X5H SoC dmaengine: sh: rcar-dmac: SMMU doesn't need IPMMU workaround dmaengine: sh: rcar-dmac: fix style in struct initialization dmaengine: qcom: bam_dma: free interrupt before the clock in error path dmaengine: ppc4xx: fix typo "contoller" in comment dmaengine: ste_dma40: Search all blocks for fixed logical channels dt-bindings: dma: dma40: Restore disabled-channels dmaengine: ste_dma40: Validate memcpy configuration ...
2026-10-23Merge tag 'pci-v7.4-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci Pull PCI updates from Bjorn Helgaas: "Enumeration: - Set supported_speeds in set_pcie_port_type() so sparc64 and powerpc, which call it via of_create_pci_dev() instead of the usual pci_setup_device(), correctly set the supported PCIe link speeds (Stian Halseth) - When pcie_set_mps() changes MPS, update the value in the saved state so a subsequent restore doesn't restore an invalid value (Niklas Cassel) - Skip Target Speed quirk on clamped ports with no link (Maciej W. Rozycki) Driver binding: - Assume control of portdrv-related features only when portdrv is enabled, since we can't use them without portdrv (Kuppuswamy Sathyanarayanan) - Centralize feature ownership checking so code only needs to check 'host->native_X' and doesn't need to also check 'pcie_ports_native' (Kuppuswamy Sathyanarayanan) Error handling: - Fix leaks when ACPI APEI/GHES error events overflow the kfifo or mention a device that no longer exists (Priyank Rathod) - Fix aer_process_err_devices() leak when a device is recorded as an error source purely by being mentioned in the Root Port Error Source and the device is inaccessible or logged only masked errors (Priyank Rathod) ASPM: - Disable ASPM when drivers request that, even if the OS doesn't own ASPM; otherwise drivers do it on their own, which is worse (Ilpo Järvinen) Power management: - Align hibernate poweroff flow with suspend flow for bridges so they can be powered down at hibernate as they are for suspend (Mario Limonciello) - Restore BARs after powering up during enumeration to fix a regression on devices that don't preserve state in D3hot (Keng-Yu Lin) - Avoid D3 on PLX PEX 8532/8533/8548 downstream ports, where putting them in D3hot takes down the whole switch (Imre Kaloz) Power control: - Add GPIO driver for Toshiba TC9563 embedded GPIO controller (Alex Elder) - Add DT documentation and pwrctrl driver support for TC9563 embedded GPIO controller (Lorenzo Bianconi) - Switch the tc9563 per-port reset to use the GPIO descriptor API instead of direct regmap accesses (Lorenzo Bianconi) - Only destroy devices created by pwrctrl core, so that when removing a PCIe controller driver that uses pwrctrl, we don't remove devices populated by another mechanism (Shawn Lin) - Power off child devices on power-on failure (Lorenzo Bianconi) PCIe native device hotplug: - Make the 'pciehp_poll_mode' parameter read-only to prevent changes via sysfs, which can cause errors when unbinding (Runyu Xiao) Virtualization: - Read SR-IOV VF Revision ID and Subsystem ID from VF instead of assuming they're the same as VF 0; they may differ (Logan Odell) - Add ACS quirk for Pericom PI7C9X2G304 switches (Hans de Goede) Peer-to-peer DMA: - Add Zhaoxin KX-6000, KH-40000, KX-6000G, KX-7000, and KH-50000 host bridges to allowlist (LeoLiu-oc) - Add Alibaba T-HEAD Yitian 710 host bridge to allowlist (Feng Tang) - Add Intel Haswell client host bridge to allowlist (Scott Lee) - Intel Xeon E3/E5/E7 0x6f00 host bridge to allowlist (kai zhang) - Fix handling of errors in pci_p2pdma_add_resource() to avoid (a) unmapping a BAR if registering another fails and (b) use after free of p2p_pgmap (Leon Romanovsky) - Wait for RCU readers before freeing state to avoid use-after-free of pdev->p2pdma (Leon Romanovsky) - Restrict pci_p2pmem_find_many() to providers backed by a pool (Leon Romanovsky) - Safely terminate ACS redirect lists to avoid out-of-bounds access to the buffer (Leon Romanovsky) - Silence 'Host bridge not in P2PDMA whitelist' warnings unless caller, e.g., pci_p2pmem_find_many(), requests 'verbose' (Leon Romanovsky) Sysfs: - Return -ENODEV or -EIO sysfs 'label' or 'acpi_index' attributes when Device Name _DSM fails, not -1, which is interpreted as -EPERM (Krzysztof Wilczyński) - Return valid sysfs 'acpi_index' attribute even if the Device Name _DSM returned an invalid 'label' (Krzysztof Wilczyński) - Expose sysfs 'acpi_index' and 'label' based on whether the Device Name _DSM returns valid data, not merely whether the _DSM is implemented (Krzysztof Wilczyński) - Avoid out-of-bounds reads of the label returned by the Device Name _DSM, which is in UTF-16 characters, not bytes (Krzysztof Wilczyński) - Reject unaligned resource I/O port accesses, which can oops on arm64 (Deepanshu Kartikey) Endpoint framework: - Pass the correct physical and virtual endpoint function numbers when setting translation of inbound memory windows (Koichiro Den) - Make embedded doorbell IRQ non-shared, since currently only the first EPF can allocate doorbells (Koichiro Den) - MSI doorbells currently target the first EPF attached to an EPC; let other EPFs try the embedded doorbell instead of failing when they can't use the MSI doorbell (Koichiro Den) - Serialize scan of vNTB virtual PCI bus with other PCI topology changes (Koichiro Den) - Manage vNTB lifetimes to avoid leaking virtual devices and buses and allow removal (Koichiro Den) - Track vNTB link state from both sides so both see the same effective link state (Koichiro Den) - Configure vNTB MSI-X when supported to avoid IOMMU faults and failure to deliver doorbell interrupts on RC (Koichiro Den) APM X-Gene PCIe controller driver: - Use devm for clocks so they're automatically disabled, unprepared, and released if errors happen during probe (Yuho Choi) ASPEED PCIe controller driver: - Fix clk and PHY leaks in aspeed_pcie_port_init() error paths (Liu Zhenlong) Broadcom iProc PCIe controller driver: - Expose devm_pci_alloc_host_bridge_release() so drivers can share a devm release function even if they don't need the device tree parsing done by devm_pci_alloc_host_bridge() (Bjorn Helgaas) - Request only the memory window from BCMA Enumeration ROM and warn if it doesn't match the one in DT, which fixes an iproc-bcma probe failure (Semih Baskan) Broadcom STB PCIe controller driver: - Replace bool properties for each SoC configuration with a u32 bitvector and a BFLAG() helper (Jim Quinlan) - Use a similar BQUIRK() helper to test various SoC quirks (Jim Quinlan) Cadence PCIe controller driver: - Remove device links to PHY, which are redundant because the PHY core itself adds them (Vladimir Oltean) - Return error (not success) from cdns_plat_pcie_probe() if pm_runtime_get_sync() or cdns_pcie_ep_setup() failed (Vladimir Oltean) - Correct the driver data pointer usage; previously .probe() stored 'struct cdns_plat_pcie *', but .shutdown() used the pointer as 'struct cdns_pcie *', resulting in accessing garbage (Linmao Li) ESWIN PCIe controller driver: - Publish the platform driver MODULE_DEVICE_TABLE so the driver can be autoloaded when built as a module (Pengpeng Hou) Freescale i.MX6 PCIe controller driver: - Fix resource and pwrctrl device leaks .probe() (Zhijian Han) - Improve i.MX95 Gen3 link stability by changing MPLLB_BANDWIDTH from default 120 to 140 (Richard Zhu) - Use dev_err_probe() in host init error path to silence -EPROBE_DEFER messages (Alexander Stein) - Avoid dereferencing NULL clock names when 'clocks' includes more phandles than 'clock-names' has names (Rudi Heitbaum) - Add suspend_poweroff flag so platforms like i.MX that power off RC controllers during suspend can enter L2 so endpoints can get PME_Turn_Off notifications before power loss (Richard Zhu) Freescale Layerscape PCIe controller driver: - Enable PROBE_PREFER_ASYNCHRONOUS to reduce probe time of the four controllers on LX2160A (Vincent Jardin) Intel VMD host bridge driver: - Flush DMA writes before handling MSI on Meteor Lake: MSI may arrive before write has completed, resulting in an nvme 30 second stall before a QID timeout and possibly other similar problems (Rickey Bartlett) - Flush DMA writes before handling MSI on Arrow Lake (Vladimir Nedoshivin) Marvell Aardvark PCIe controller driver: - Disable PHY on probe failures (Myeonghun Pak) Marvell MVEBU PCIe controller driver: - Refcount child OF nodes during .probe() to make a concurrent OF overlay removal safe (Krzysztof Kozlowski) MediaTek PCIe controller driver: - Find INTx DT property by 'interrupt-controller' name instead of assuming it's the first child node (Zhengping Zhang) MediaTek PCIe Gen3 controller driver: - Fix a 64-bit type truncation in mtk_pcie_set_trans_table() to avoid issues with windows above or larger than 4GB (Sreeraj S Kurup) NVIDIA Tegra264 PCIe controller driver: - Fix the Link Capabilities offset so we read the correct register (Bjorn Helgaas) Qualcomm PCIe controller driver: - Only collect reset GPIOs from PCI bridge DT nodes to avoid stealing resets used by downstream devices like USB controllers (Christopher Obbard) - Block accesses to downstream devices on link down to reduce a storm of Completion Timeout AER interrupts (Qiang Yu) - Skip system suspend/resume for firmware-managed PCIe, where firmware manages clocks, regulators, resets, etc (Mrinmay Sarkar) - Honor IOMMU provider's #iommu-cells in qcom_pcie_config_sid_1_9_0() (Manivannan Sadhasivam) - Deinitialize endpoint on remove (Guangshuo Li) - Treat Root Port error recovery as successful even if link doesn't come up after reset because the device was hot-unplugged (Konrad Dybcio) - Skip unnecessary iMSI-RX initialization if DT 'msi-map' is present, indicating an external MSI controller (Ayiluri Naga Rashmi) Renesas R-Car PCIe controller driver: - Limit Max_Read_Request_Size to 256 to avoid hardware erratum (Marek Vasut) - Support PERST# via reset subsystem as well as the existing GPIO support to prepare for R-Car Gen5 SoCs (Marek Vasut) - Add DT and driver support for the R-Car Gen 5 X5H (R8A78000) PCIe Gen 4 core (Marek Vasut) - Add Application/Local register reset DT description and driver support for both host and endpoint mode (Marek Vasut) - Add PM ops so controller works after suspend/resume (Marek Vasut) Renesas RZ/G3S PCIe controller driver: - Disable refclk on probe failure (Lad Prabhakar) - Propagate platform_get_irq_byname() errors so probe deferral works correctly (Lad Prabhakar) - Tear down INTx handlers if subsequent initialization fails (Lad Prabhakar) - Add RZ/G3L (R9A08G046) DT and driver support (Biju Das) Rockchip PCIe controller driver: - Limit host and endpoint controllers to 2.5 GT/s since 5.0 GT/s is unsafe per Rockchip (Geraldo Nascimento) Synopsys DesignWare PCIe controller driver: - Set DMA_BYPASS bit in outbound IATU CTRL2 register to avoid data corruption if the iATU translates DMA engine transactions (Sumit Kumar) - Use FIELD_PREP() to remove need for *_SHIFT definitions (Hans Zhang) TI DRA7xx PCIe controller driver: - Remove device links to PHY, which are redundant because the PHY core itself adds them (Vladimir Oltean) - Fix optional clock leak when .probe() fails by using devm_clk_get_optional_enabled() (Felix Gu) TI Keystone PCIe controller driver: - Remove device links to PHY, which are redundant because the PHY core itself adds them (Vladimir Oltean) UltraRISC PCIe controller driver: - Allow DWC drivers to skip outbound iATU setup if they don't need translation between CPU and PCI addresses (Xincheng Zhang) - Skip MEM outbound iATU setup on DP1000 (Xincheng Zhang) Xilinx Versal CPM PCIe controller driver: - Add DT and driver support for optional PERST# for use in warm reset scenarios (Sai Krishna Musham) Xilinx XDMA PCIe controller driver: - Fix device node reference leak in xilinx_pl_dma_pcie_init_irq_domain() (Wentao Liang)" * tag 'pci-v7.4-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (139 commits) PCI/pwrctrl: Power off child devices on power-on failure PCI/pwrctrl: Only destroy devices created by pwrctrl core PCI/pwrctrl: generic: Fix leaking array from of_regulator_bulk_get_all() PCI/pwrctrl: tc9563: Switch per-port reset to GPIO descriptor API PCI/pwrctrl: tc9563: Add GPIO auxiliary device support dt-bindings: PCI: toshiba,tc9563: Document embedded GPIO controller gpio: tc9563: Add support for the embedded GPIO controller PCI: qcom: Skip DWC MSI host initialization when DT 'msi-map' is present PCI: qcom: Ignore -ENODEV after Root Port reset PCI: qcom-ep: Deinitialize endpoint on remove PCI/sysfs: Reject unaligned resource I/O port accesses PCI: rcar-gen4: Add missing PM ops PCI: endpoint: pci-epf-vntb: Honor MSI-X selection PCI: endpoint: pci-epf-vntb: Use a local epf pointer in interrupt setup PCI: dwc: imx6: Use regmap_assign_bits() for conditional set/clear PCI: dwc: Describe DWC PCIe fields with full masks and FIELD_PREP() PCI: dwc: Rename pp->irq_domain to pp->msi_irq_domain PCI: dwc: Rename dw_pcie_allocate_domains() to dw_pcie_allocate_msi_domains() PCI: dwc: Correct PCIE_DW_PLAT_EP reference in Kconfig help PCI/ASPM: Disable ASPM when driver requests it ...
2026-10-21Merge branch 'pci/controller/dwc-ultrarisc'Bjorn Helgaas
- Allow DWC drivers to skip outbound iATU setup if they don't need translation between CPU and PCI addresses (Xincheng Zhang) - Skip MEM outbound iATU setup on DP1000 (Xincheng Zhang) * pci/controller/dwc-ultrarisc: PCI: ultrarisc: Skip MEM outbound iATU setup on DP1000 PCI: dwc: Allow drivers to skip MEM outbound iATU setup
2026-10-21Merge branch 'pci/controller/dwc-rcar-gen4'Bjorn Helgaas
- Limit Max_Read_Request_Size to 256 to avoid hardware erratum (Marek Vasut) - Add a .post_deinit() callback to handle dw_pcie_ep_init() failures (Marek Vasut) - Rework .additional_common_init() into .init() to simplify flow (Marek Vasut) - Add .deinit() and .speed_control() callbacks, both to prepare for R-Car Gen5 SoC support (Marek Vasut) - Support PERST# via reset subsystem as well as the existing GPIO support to prepare for R-Car Gen5 SoCs (Marek Vasut) - Add DT and driver support for the R-Car Gen 5 X5H (R8A78000) PCIe Gen 4 core (Marek Vasut) - Drop documentation about obtaining R-Car platform firmware, which is obsolete now that it's available in the linux-firmware.git repository (Marek Vasut) - Add Application/Local register reset DT description and driver support for both host and endpoint mode (Marek Vasut) - Add PM ops so controller works after suspend/resume (Marek Vasut) * pci/controller/dwc-rcar-gen4: PCI: rcar-gen4: Add missing PM ops PCI: rcar-gen4: Add Application/Local register reset control dt-bindings: PCI: rcar-gen4-pci-ep: Document Application/Local register reset dt-bindings: PCI: rcar-gen4-pci-host: Document Application/Local register reset PCI: rcar-gen4: Drop documentation about obtaining platform firmware PCI: rcar-gen4: Add support for R-Car X5H PCIe4 PCI: rcar-gen4: Handle PERST# via reset subsystem PCI: rcar-gen4: Add .speed_control() callback PCI: rcar-gen4: Add .deinit() callback PCI: rcar-gen4: Rework .additional_common_init() into .init() dt-bindings: PCI: rcar-gen4-pci-host: Add R-Car X5H PCIe4 compatible PCI: rcar-gen4: Use .post_deinit() to handle dw_pcie_ep_init() failures PCI: dwc: Add dw_pcie_ep_ops->post_deinit() callback PCI: rcar-gen4: Limit Max_Read_Request_Size to 256 Bytes # Conflicts: # drivers/pci/controller/dwc/pcie-rcar-gen4.c
2026-10-21Merge branch 'pci/controller/dwc-qcom'Bjorn Helgaas
- Only collect reset GPIOs from PCI bridge DT nodes to avoid stealing resets used by downstream devices like USB controllers (Christopher Obbard) - Block accesses to downstream devices on link down to reduce a storm of Completion Timeout AER interrupts (Qiang Yu) - Skip system suspend/resume for firmware-managed PCIe, where firmware manages clocks, regulators, resets, etc (Mrinmay Sarkar) - Honor IOMMU provider's #iommu-cells in qcom_pcie_config_sid_1_9_0() (Manivannan Sadhasivam) - Deinitialize endpoint on remove (Guangshuo Li) - Treat Root Port error recovery as successful even if link doesn't come up after reset because the device was hot-unplugged (Konrad Dybcio) - Skip unnecessary iMSI-RX initialization if DT 'msi-map' is present, indicating an external MSI controller (Ayiluri Naga Rashmi) * pci/controller/dwc-qcom: PCI: qcom: Skip DWC MSI host initialization when DT 'msi-map' is present PCI: qcom: Ignore -ENODEV after Root Port reset PCI: qcom-ep: Deinitialize endpoint on remove PCI: qcom: Honor IOMMU provider's #iommu-cells in qcom_pcie_config_sid_1_9_0() PCI: qcom: Skip system suspend/resume for firmware-managed PCIe PCI: qcom: Block accesses to downstream devices on link down PCI: qcom: Only check bridge nodes for PERST# GPIOs
2026-10-21Merge branch 'pci/controller/dwc-layerscape'Bjorn Helgaas
- Enable PROBE_PREFER_ASYNCHRONOUS to reduce probe time of the four controllers on LX2160A (Vincent Jardin) * pci/controller/dwc-layerscape: PCI: layerscape: Enable async probe by default
2026-10-21Merge branch 'pci/controller/dwc-keystone'Bjorn Helgaas
- Remove device links to PHY, which are redundant because the PHY core itself adds them (Vladimir Oltean) * pci/controller/dwc-keystone: PCI: keystone: Remove device links to PHY
2026-10-21Merge branch 'pci/controller/dwc-imx6'Bjorn Helgaas
- Fix pwrctrl device leak when .probe() PM runtime setup fails (Zhijian Han) - Fix resource leaks in .probe() error paths (Zhijian Han) - Improve i.MX95 Gen3 link stability by changing MPLLB_BANDWIDTH from default 120 to 140 (Richard Zhu) - Use dev_err_probe() in host init error path to silence -EPROBE_DEFER messages (Alexander Stein) - Avoid dereferencing NULL clock names when 'clocks' includes more phandles than 'clock-names' has names (Rudi Heitbaum) - Add suspend_poweroff flag so platforms like i.MX that power off RC controllers during suspend can enter L2 so endpoints can get PME_Turn_Off notifications before power loss (Richard Zhu) - Use regmap_assign_bits() to simplify conditional set/clear blocks (Peng Fan) * pci/controller/dwc-imx6: PCI: dwc: imx6: Use regmap_assign_bits() for conditional set/clear PCI: dwc: Add suspend_poweroff flag for platforms with RC power loss PCI: imx6: Avoid dereferencing a NULL clock name PCI: imx6: Use dev_err_probe() in error path of pci_pwrctrl_power_on_devices() PCI: imx6: Update MPLLB bandwidth to improve i.MX95 Gen3 PCIe stability PCI: imx6: Fix resource leaks in probe error paths PCI: imx6: Fix pwrctrl device leak on PM runtime setup failure
2026-10-21Merge branch 'pci/controller/dwc-eswin'Bjorn Helgaas
- Publish the platform driver MODULE_DEVICE_TABLE so the driver can be autoloaded when built as a module (Pengpeng Hou) * pci/controller/dwc-eswin: PCI: eswin: Publish the platform driver OF alias
2026-10-21Merge branch 'pci/controller/dwc-dra7xx'Bjorn Helgaas
- Remove device links to PHY, which are redundant because the PHY core itself adds them (Vladimir Oltean) - Fix optional clock leak when .probe() fails by using devm_clk_get_optional_enabled() (Felix Gu) * pci/controller/dwc-dra7xx: PCI: dra7xx: Fix clock enable leak on probe failure PCI: dra7xx: Remove device links to PHY
2026-10-21Merge branch 'pci/controller/dwc'Bjorn Helgaas
- Align register macros with Synopsys documentation (Hans Zhang) - Remove unused PCIE_ATU_UNR_* register definitions; the driver now uses ATU_* macros instead (Hans Zhang) - Set DMA_BYPASS bit in outbound IATU CTRL2 register to avoid data corruption if the iATU translates DMA engine transactions (Sumit Kumar) - Correct Kconfig help text reference to PCIE_DW_PLAT_EP (Philippe Lecointre) - Rename dw_pcie_allocate_domains() to dw_pcie_allocate_msi_domains() for clarity (Shawn Lin) - Rename pp->irq_domain to pp->msi_irq_domain for clarity (Shawn Lin) - Use FIELD_PREP() to remove need for *_SHIFT definitions (Hans Zhang) * pci/controller/dwc: PCI: dwc: Describe DWC PCIe fields with full masks and FIELD_PREP() PCI: dwc: Rename pp->irq_domain to pp->msi_irq_domain PCI: dwc: Rename dw_pcie_allocate_domains() to dw_pcie_allocate_msi_domains() PCI: dwc: Correct PCIE_DW_PLAT_EP reference in Kconfig help PCI: dwc: Set DMA_BYPASS bit in outbound IATU CTRL2 register PCI: dwc: Remove unused PCIE_ATU_UNR_* register definitions PCI: dwc: Align register macros with Synopsys documentation
2026-10-20PCI: qcom: Skip DWC MSI host initialization when DT 'msi-map' is presentAyiluri Naga Rashmi
qcom_pcie_ecam_host_init() unconditionally initializes the DesignWare internal MSI controller and sets use_imsi_rx, irrespective of whether an external MSI controller is described for the host bridge. When an 'msi-map' DT property is present, MSI interrupts are handled by the mapped external MSI controller. Initializing the internal iMSI-RX domain in this case is unnecessary. Set use_imsi_rx based on the presence of 'msi-map' in DT and initialize the DesignWare MSI host only when iMSI-RX is required. Signed-off-by: Ayiluri Naga Rashmi <ayiluri.rashmi@oss.qualcomm.com> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Link: https://patch.msgid.link/20260917-skipmsi_forlpi-v1-1-14a4932a4311@oss.qualcomm.com
2026-10-20PCI: qcom: Ignore -ENODEV after Root Port resetKonrad Dybcio
Root Port recovery may race with a device hot-unplug. In that case, dw_pcie_wait_for_link() returns -ENODEV because no device is detected after the controller has been successfully reset. This is a valid outcome and should not cause Root Port recovery to fail. Ignore -ENODEV while continuing to propagate other link-training errors. Fixes: 4d88cb82a6d9 ("PCI: qcom: Implement .reset_root_port() and use for link down") Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com> Link: https://patch.msgid.link/20260916-topic-pcie_portrec_enodev-v1-1-5dc7bde39552@oss.qualcomm.com Assisted-by: LLM
2026-10-20PCI: qcom-ep: Deinitialize endpoint on removeGuangshuo Li
qcom_pcie_ep_probe() initializes the DesignWare PCIe endpoint with dw_pcie_ep_init(). The probe failure paths call dw_pcie_ep_deinit() to release the corresponding endpoint resources, but the remove path does not perform the matching teardown after a successful probe. As a result, resources initialized by the DesignWare endpoint core can remain allocated when the endpoint controller is removed. Notify endpoint functions about EPC deinitialization and call dw_pcie_ep_deinit() before disabling the controller resources. Keep the existing early return when the link is already disabled since Qualcomm endpoint controllers depend on the host refclk for hardware cleanup. This issue was found by manual code inspection. Fixes: f55fee56a631 ("PCI: qcom-ep: Add Qualcomm PCIe Endpoint controller driver") Signed-off-by: Guangshuo Li <lgs201920130244@gmail.com> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: stable@vger.kernel.org Link: https://patch.msgid.link/20260916090126.2963064-1-lgs201920130244@gmail.com
2026-10-19PCI: rcar-gen4: Add missing PM opsMarek Vasut
The R-Car Gen4 PCIe controller is part of a power domain. On R-Car S4 and V4H, this is an always-on power domain which is not shut down in suspend. On R-Car V4M, this is a dedicated A2PCIPHY power domain, which is shut down during suspend, and the controller loses state, which prevents the PCIe from working after resume. Fix this by adding generic suspend/resume noirq ops for the controller, which tear the link down on suspend, and restart it on resume. Use the same PM ops on all of R-Car Gen4 to gracefully suspend and resume the PCIe link on V4H and S4 too. Test case which demonstrates the problem on R-Car V4M: $ hexdump -vC /sys/bus/pci/devices/0000:00:00.0/config > /tmp/pre $ echo s2idle > /sys/power/mem_sleep $ echo platform > /sys/power/pm_test $ echo mem > /sys/power/state $ hexdump -vC /sys/bus/pci/devices/0000:00:00.0/config > /tmp/post $ diff -Naru /tmp/pre /tmp/post ... -00000000 12 19 32 00 07 05 10 00 00 00 04 06 00 00 01 00 +00000000 12 19 32 00 07 05 10 00 00 00 00 ff 00 00 80 00 ^^^^^ Class 0604->00ff Fixes: 0270dbe4f891 ("arm64: dts: renesas: r8a779h0: Add PCIe Host and Endpoint nodes") Reported-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Koichiro Den <den@valinux.co.jp> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://patch.msgid.link/20261004011851.866833-1-marek.vasut+renesas@mailbox.org
2026-10-17PCI: dwc: imx6: Use regmap_assign_bits() for conditional set/clearPeng Fan
Replace multiple if/else blocks using regmap_set_bits()/regmap_clear_bits() with the simpler regmap_assign_bits() calls. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com> Reviewed-by: Frank Li <Frank.Li@nxp.com> Acked-by: Richard Zhu <hongxing.zhu@nxp.com> Link: https://patch.msgid.link/20260924083429.461746-1-peng.fan@oss.nxp.com
2026-10-17PCI: dwc: Describe DWC PCIe fields with full masks and FIELD_PREP()Hans Zhang
Several DWC PCIe register fields are described with a shift macro next to their mask, or with only a shift and the field width implied by the value written. Document the field position and width in a single full mask and use FIELD_PREP() to encode it. No functional change intended. Signed-off-by: Hans Zhang <18255117159@163.com> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com> Link: https://patch.msgid.link/20260930013842.82476-1-18255117159@163.com
2026-10-17PCI: dwc: Rename pp->irq_domain to pp->msi_irq_domainShawn Lin
pp->irq_domain is exclusively the MSI parent irq domain: it is created by dw_pcie_allocate_msi_domains() with msi_create_parent_irq_domain() and is only used to resolve the MSI child virqs in dw_handle_msi_irq() and in the keystone and dra7xx MSI handlers. The name gives no hint about that, in the same way dw_pcie_allocate_domains() did not say that it was only about MSI. Rename it to pp->msi_irq_domain, matching the previous rename. Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com> Reviewed-by: Vignesh Raghavendra <vigneshr@ti.com> Cc: Vignesh Raghavendra <vigneshr@ti.com> Link: https://patch.msgid.link/1790734930-217000-3-git-send-email-shawn.lin@rock-chips.com
2026-10-17PCI: dwc: Rename dw_pcie_allocate_domains() to dw_pcie_allocate_msi_domains()Shawn Lin
Rename dw_pcie_allocate_domains() to dw_pcie_allocate_msi_domains() so that the name says what it allocates and cannot be mistaken for a generic domain allocator. Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com> Link: https://patch.msgid.link/1790734930-217000-2-git-send-email-shawn.lin@rock-chips.com
2026-10-17PCI: dwc: Correct PCIE_DW_PLAT_EP reference in Kconfig helpLECOINTRE Philippe
The Kconfig help text for PCIE_DW_PLAT_HOST and PCIE_DW_PLAT_EP incorrectly refers to PCI_DW_PLAT_EP. Replace the typo with the correct symbol name, PCIE_DW_PLAT_EP, so the help text matches the actual Kconfig option. Signed-off-by: Philippe Lecointre <philippe.lecointre@thalesgroup.com> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com> Link: https://patch.msgid.link/305ef70ecadb4db9aa42c66607240aba@thalesgroup.com
2026-10-14Merge tag 'pci-v7.3-fixes-5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci Pull PCI fixes from Bjorn Helgaas: - Leave ANFE masked on Apple T2 Secure Enclave, which fixes spontaneous poweroff regressions on MacBookPro16,1 and likely other models with the T2 caused by new Advisory Non-Fatal Error support (Jason Perlow) - Move dw-rockchip INTx IRQ setup from rockchip_pcie_host_init(), where it runs after every reset, to the rockchip_pcie_probe() path to avoid installing new IRQ handler (which causes INTx IRQs to be lost) and leaking an IRQ domain on every reset; fixes a regression added this cycle (Shawn Lin) * tag 'pci-v7.3-fixes-5' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: PCI: dw-rockchip: Move INTx IRQ setup to probe PCI/AER: Keep ANFE masked on Apple T2 Secure Enclave
2026-10-14PCI: layerscape: Enable async probe by defaultVincent Jardin
dw_pcie_wait_for_link() polls for up to PCIE_LINK_WAIT_MAX_RETRIES * PCIE_LINK_WAIT_SLEEP_MS (10 * 90 ms) per controller. The controllers are probed one after the other, so, it leads to slow boot time. On an LX2160A board with 4 enabled controllers and no link on any of them, dw_pcie_host_init() took almost 4s. Probing the 4 controllers in parallel allows to have it down to 1s. So enable async probe by default. Signed-off-by: Vincent Jardin <vjardin@free.fr> [mani: commit log] Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Frank Li <Frank.Li@nxp.com> Link: https://patch.msgid.link/20260928-for-upstream-pci-layerscape-async-probe-v1-1-76412d887baa@free.fr
2026-10-14PCI: dwc: Add suspend_poweroff flag for platforms with RC power lossRichard Zhu
Some platforms like i.MX power off their PCIe RC controllers during system suspend, requiring full re-initialization on resume. These platforms need to enter L2 state to properly notify endpoints before power loss. According to PCIe r7.0, sec 5.2, system software should transition the device into D3hot before broadcasting the PME_Turn_Off message to initiate L2 entry. In practice, endpoint drivers properly put their devices into D3hot during the suspend flow. However, some wakeup-capable endpoint devices that don't support PME from D3cold fail the D3cold capability check in pci_host_common_d3cold_possible(), which currently prevents L2 entry even though the devices are already in the required D3hot state. For platforms where the RC loses power during suspend, L2 entry is essential regardless of D3cold support, as the link will be lost anyway when the RC powers off. Without L2 entry, endpoints are not properly notified before power loss, which can cause issues during resume and reinitialization. Add a suspend_poweroff flag to allow L2 entry for devices that are in D3hot but fail the D3cold capability check, and enable it for i.MX PCIe controllers that lose power during suspend. Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com> [mani: removed redundant comment] Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Link: https://patch.msgid.link/20260917063322.4102035-1-hongxing.zhu@oss.nxp.com
2026-10-14PCI: dwc: Set DMA_BYPASS bit in outbound IATU CTRL2 registerSumit Kumar
An outbound iATU region matches any local (AXI/application-side) address that falls within its Base/Limit window and rewrites it to the PCIe-side address programmed in that region's Target Address Registers before the transaction goes out on the link. This matching does not distinguish CPU-initiated transactions from ones issued by the internal DMA engine (eDMA/HDMA). Example: outbound region 0 is programmed with Base/Limit covering local addresses 0x8000_0000-0x8000_0FFF and Target 0x1_0000_0000, for CPU-initiated accesses. The DMA engine is later given a descriptor whose destination is the host address 0x8000_0080, which happens to fall inside region 0's Base/Limit range. The iATU matches the DMA transaction against region 0 too and rewrites it to 0x1_0000_0080 instead of passing 0x8000_0080 through unchanged. The transaction then lands on the wrong host address, causing data corruption or an IOMMU fault when the rewritten address has no valid mapping. Set the DMA_BYPASS bit (bit 27) in PCIE_ATU_REGION_CTRL2 when programming outbound iATU regions so only CPU/AXI-initiated transactions are matched against the region; DMA engine transactions bypass the translation and go out on the PCIe link with their original address. Signed-off-by: Sumit Kumar <sumit.kumar@oss.qualcomm.com> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: stable@vger.kernel.org Link: https://patch.msgid.link/20260908-dma_bypass-v2-1-c3c81d408c0c@oss.qualcomm.com
2026-10-14PCI: eswin: Publish the platform driver OF aliasPengpeng Hou
PCIE_ESWIN is tristate and eswin_pcie_driver uses an OF match table, but the table is not exported. The resulting module lacks the OF alias needed for automatic loading on an ESWIN PCIe host controller. Export the OF table. Keep builtin_platform_driver() and the intentional absence of an unregister path unchanged; module alias publication does not require making this interrupt-controller driver unloadable. The issue was found by our static-analysis tool. Assisted-by: LLM Fixes: b593c26d081a ("PCI: eswin: Add ESWIN PCIe Root Complex driver") Signed-off-by: Pengpeng Hou <hppiscas@163.com> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com> Link: https://patch.msgid.link/20260920033737.13957-1-hppiscas@163.com
2026-10-14PCI: imx6: Avoid dereferencing a NULL clock nameRudi Heitbaum
of_clk_bulk_get() leaves 'clk_bulk_data->id' as NULL for every clock that has no matching entry in "clock-names", which is legal: a node may list more "clocks" phandles than it names. Both scans of the bulk array dereference that id unconditionally, so such a node oopses during probe. The loop in imx_pcie_probe() has been wrong since it was written. The loop in imx_setup_phy_mpll() was not: it read a fixed clks[] whose ids came from the driver's own clk_names[] and were never NULL, and only became wrong when the driver moved to the bulk array. Check 'clk_bulk_data->id' before dereferencing it in both. Fixes: f6a1fdfc78e2 ("PCI: imx6: Use devm_clk_bulk_get_all() to fetch clocks") Fixes: d8574ce57d76 ("PCI: imx6: Add external reference clock input mode support") Signed-off-by: Rudi Heitbaum <rudi@heitbaum.com> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com> Acked-by: Richard Zhu <hongxing.zhu@nxp.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/all/am8iBwJSEhYhWTqk@6cfee64030a6/ Link: https://patch.msgid.link/aqfqE4OLhnN4a1lW@b65e9c1eb12f
2026-10-14PCI: ultrarisc: Skip MEM outbound iATU setup on DP1000Xincheng Zhang
DP1000 has 16 outbound iATU windows and each window can map up to 4GB. One window is used for CFG accesses, one for I/O space and one for the 32-bit MEM aperture, leaving only 13 windows for the 64-bit MEM aperture. This limits the 64-bit MEM aperture that can be described with outbound iATU windows. DP1000 routes MEM transactions without using outbound iATU windows, so skip generic DWC MEM outbound iATU setup to allow a larger 64-bit MEM aperture. DP1000 does not use ECAM for this controller. Config space accesses keep using the normal DWC config access path and CFG outbound iATU programming. I/O space is also unchanged and still uses an outbound iATU window. The new flag only skips generic MEM-window programming. The DP1000 integration has SoC wrapper address decode for the PCIe MEM apertures described by the "ranges" property. CPU physical accesses to those MEM apertures are routed directly as PCIe MEM transactions with the corresponding PCIe bus address, without consuming outbound iATU windows. Set 'dw_pcie_rp->bypass_ob_mem_iatu' for this controller. Signed-off-by: Xincheng Zhang <zhangxincheng@ultrarisc.com> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com> Link: https://patch.msgid.link/20260905025635.211390-3-zhangxincheng@ultrarisc.com
2026-10-14PCI: dwc: Allow drivers to skip MEM outbound iATU setupXincheng Zhang
Some DWC-based controllers do not require outbound iATU windows for MEM transactions. For those platforms, programming outbound iATU windows for host bridge MEM ranges is unnecessary and may constrain the available MEM aperture. The DWC PCIe RP Controller Databook v6.00a, section 3.12.2, describes the default outbound no-match behavior as pass-through. Section 3.12.5.6, "No Address Match Result", says the address is not translated and programmable TLP header fields come from the application transmit interface. This no-match path cannot translate between different parent-bus and PCI addresses, so require skipped MEM ranges to be identity-mapped. Add dw_pcie_rp->bypass_ob_mem_iatu so drivers can skip generic MEM iATU setup while using the common DWC host init path. Existing drivers keep the current behavior because the flag defaults to false. The I/O iATU setup does not use the MEM resource iterator, and the iterator may be uninitialized when MEM setup is skipped. Avoid using it in the I/O iATU error path. Signed-off-by: Xincheng Zhang <zhangxincheng@ultrarisc.com> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com> Link: https://patch.msgid.link/20260905025635.211390-2-zhangxincheng@ultrarisc.com
2026-10-14PCI: imx6: Use dev_err_probe() in error path of pci_pwrctrl_power_on_devices()Alexander Stein
pci_pwrctrl_power_on_devices() might return -EPROBE_DEFER resulting in an error message. Use dev_err_probe() to silence this non-error message. Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com> Reviewed-by: Frank Li <Frank.Li@nxp.com> Link: https://patch.msgid.link/20260619112535.1127850-1-alexander.stein@ew.tq-group.com
2026-10-13PCI: qcom: Honor IOMMU provider's #iommu-cells in qcom_pcie_config_sid_1_9_0()Manivannan Sadhasivam
qcom_pcie_config_sid_1_9_0() reads the "iommu-map" property as an array of fixed four-word {rid-base, phandle, sid, rid-len} entries to program the BDF to SID translation table. But that layout only holds for an IOMMU with '#iommu-cells = <1>'. The PCIe SMMUs on these SoCs use '#iommu-cells = <2>' (SID and mask), so per the pci-iommu binding each entry is really five cells long. This used to work only because the DTs were themselves broken. They described iommu-map with four-cell entries that omitted the SID mask, which of_map_id() tolerated via its of_check_bad_map() fallback, and the four-word parsing coincidentally matched that malformed shape. Since commit ccb2fd725d41 ("of: Respect #{iommu,msi}-cells in maps") the OF core parses such maps correctly, so the device trees were converted to proper five-cell entries, e.g. commit c41749e9554d ("arm64: dts: qcom: sm8250: Fix the PCIe iommu-map entries"). With five-cell entries the fixed four-word stride slips by one cell for each entry after the first, so qcom_pcie_config_sid_1_9_0() reads the endpoint mapping's RID from the preceding entry's length cell and its SID from the phandle cell. As the RID is the hash key, the endpoint's real RID is never programmed into the BDF to SID table. Its DMA then hashes to an unprogrammed slot, gets tagged with SID 0 and the SMMU faults like below on QCS8300: arm-smmu 15200000.iommu: Unhandled context fault: fsr=0x402, iova=0xffa00000, cbfrsynra=0x0, cb=1 To fix this, walk the map with a stride of 3 + '#iommu-cells' of the referenced IOMMU and take the SID from the first specifier cell, which is all the BDF to SID table needs. Validate the layout instead of trusting the array size. Also, preserve the legacy behavior of the old DTs by detecting the same pattern that of_check_bad_map() recognizes and falling back to a stride of four. Fixes: 4c9398822106 ("PCI: qcom: Add support for configuring BDF to SID mapping for SM8250") Reported-by: Loic Poulain <loic.poulain@oss.qualcomm.com> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com> Tested-by: Loic Poulain <loic.poulain@oss.qualcomm.com> Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-HDK Link: https://patch.msgid.link/20260907143349.317495-1-mani@kernel.org
2026-10-13PCI: qcom: Skip system suspend/resume for firmware-managed PCIeMrinmay Sarkar
For firmware-managed PCIe controllers, all resources, including clocks, regulators, resets, PHYs and link state, are owned and managed by firmware. The host driver must not attempt to manage these resources during system suspend or resume. Firmware will properly transition the devices/controller into relevant low power modes. Skip the suspend and resume operations for firmware-managed controllers. The associated power domain transitions are handled independently by the genpd framework through its own system suspend/resume callbacks, so no explicit action is required by the PCIe controller driver. Signed-off-by: Mrinmay Sarkar <mrinmay.sarkar@oss.qualcomm.com> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com> Link: https://patch.msgid.link/20260831-skip_suspend-v1-1-ba2d877e22b1@oss.qualcomm.com
2026-10-13PCI: qcom: Block accesses to downstream devices on link downQiang Yu
After a PCIe link goes down, software may still access the BAR (MMIO) space or configuration space of devices behind that link before recovery has run. As the link is down, these accesses never complete, resulting in a storm of Completion Timeout AERs. Use the controller's Outbound blocker to drop these accesses to the PCIe address space as soon as the link-down interrupt fires, so that Completion Timeout AERs are reduced. The blocked range covers the entire address space (base 0x0, all-ones limit), since the Root Port's own DBI/iATU register space remains accessible regardless. The range is programmed once in the host init path, since the range registers are wiped by BCR reset. This leaves only the OUTBOUND_BLOCKER_EN bit to be flipped from the link-down IRQ handler, so the blocker can be armed with a single fast register write for immediate effect. The subsequent Root Port reset re-initialises the controller, which clears the enable bit and re-programs the range for the fresh link. Some IP revisions implement the Outbound blocker registers but do not wire up the "global" interrupt used to deliver the link-down event that arms the blocker, so there is no way to enable the blocker on those platforms. Restrict blocker initialization to the post_init hooks of the IP revisions that do have a global IRQ wired up (qcom_pcie_post_init_2_3_3(), qcom_pcie_post_init_2_7_0() and qcom_pcie_post_init_2_9_0()), instead of unconditionally programming it from the common host_init path. The link-down IRQ thread's blocker-enable write to PARF_SYS_CTRL can race with a Root Port reset triggered independently through AER, which reprograms PARF_SYS_CTRL as part of reinitializing the controller. Serialize these with a per-controller mutex. Signed-off-by: Qiang Yu <qiang.yu@oss.qualcomm.com> [mani: renamed hw_lock to reset_lock, ECAM blocker to Outboound blocker, used guard(mutex)] Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com> Tested-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> # X1E80100 CRD + ASUS PA27AC Link: https://patch.msgid.link/20260819-ecam_blocker-v2-1-e7a8fdc1c5cb@oss.qualcomm.com
2026-10-12PCI: dw-rockchip: Move INTx IRQ setup to probeShawn Lin
Since commit b376b3ff9cb0 ("PCI: dw-rockchip: Implement .reset_root_port() and use for link down"), .reset_root_port() re-runs the host ops .init() callback to reprogram the Root Complex after a controller reset. That works for the register programming, but .init() is not re-entrant: it also creates the INTx IRQ domain and installs the chained INTx handler. Every Root Port reset therefore ends up with a second IRQ domain registered for the same fwnode: the previous one is leaked, as it is never removed, and worse, the INTx virqs of the downstream PCI devices were allocated in the previous IRQ domain and are never re-mapped, while the chained handler now looks up virqs in the new, empty domain. After a link down recovery, INTx interrupts are silently lost. Fix it by moving the of_irq_get_byname() lookup, the INTx IRQ domain creation and the chained handler installation out of .init() and into rockchip_pcie_configure_rc(), just before dw_pcie_host_init(). The lookup has to happen before the host is initialized, because dw_pcie_host_init() enumerates the bus and probes the downstream devices, and pci_assign_irq() maps their INTx interrupts at that point: if the domain does not exist yet, the mapping fails and the devices end up without a usable INTx. This also mirrors how the qcom driver requests its global IRQ, and leaves .init() with nothing but idempotent register programming, so both .reset_root_port() and dw_pcie_resume_noirq() can safely re-run it. Re-running of_irq_get_byname() on every resume is also gone. Fixes: b376b3ff9cb0 ("PCI: dw-rockchip: Implement .reset_root_port() and use for link down") Suggested-by: Niklas Cassel <cassel@kernel.org> Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Tested-by: Diederik de Haas <diederik@cknow-tech.com> # NanoPC-T6 Plus Reviewed-by: Niklas Cassel <cassel@kernel.org> Link: https://patch.msgid.link/1790222793-77182-1-git-send-email-shawn.lin@rock-chips.com
2026-09-28PCI: dwc: Remove unused PCIE_ATU_UNR_* register definitionsHans Zhang
The PCIE_ATU_UNR_* macros are not used anywhere in the kernel. They were presumably intended for unrolled iATU register access, but the driver now uses the ATU_* macros and computes unrolled offsets via ATU_UNROLL_BASE(). Remove these unused definitions. No functional change intended. Signed-off-by: Hans Zhang <18255117159@163.com> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com> Link: https://patch.msgid.link/20260911162537.469018-3-18255117159@163.com
2026-09-28PCI: dwc: Align register macros with Synopsys documentationHans Zhang
The DWC PCIe register and field macros are inconsistently named and often do not match the Synopsys DesignWare PCIe Controller Reference Manual. This makes it harder to cross-reference the code with the documentation when debugging or maintaining the driver. As suggested during review, do not add an "_OFF" suffix to the Port Link Control register: the suffix is ambiguous (offset vs. off) and unnecessary. Use PORT_LINK_CTRL, and include the register name in its field macros, e.g. PORT_LINK_CTRL_DLE, PORT_LINK_CTRL_FLM, and PORT_LINK_CTRL_LC_*. Align other DWC PCIe controller-internal register macros in the same spirit by dropping the redundant PCIE_ prefix and using the documented base names, such as PORT_FORCE_LINK, PORT_AFAC, PORT_LANE_SKEW, TIMER_CTRL_MAX_FUNC_NUM, PORT_LINK_DEBUG0/1, LINK_WIDTH_SPEED_CTRL, GEN3_CTRL, GEN3_EQ_CTRL, MULTI_LANE_CTRL, MISC_CONTROL_1, MSIX_DOORBELL, and the ATU_* registers. Field macros are renamed consistently so their register association is clear. This improves code maintainability and eases future reference to the controller manual. No functional change intended. Co-developed-by: Feizhou Yu <yufeizhou201@163.com> Signed-off-by: Feizhou Yu <yufeizhou201@163.com> Signed-off-by: Hans Zhang <18255117159@163.com> [mani: fixed checkpatch warnings by moving comments] Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com> Link: https://patch.msgid.link/20260911162537.469018-2-18255117159@163.com
2026-09-25PCI: rcar-gen4: Add Application/Local register reset controlMarek Vasut
The R-Car Gen4 PCIe controller does contain core reset, which puts the controller back into well-defined state, but it does also tear down the PCIe link. This is called Application/Local register reset in the documentation. Deassert the core reset after the core clock has been enabled, and assert the core reset in case of error or when shutting down the controller. This also fixes reinitialization failure of the controller, where if the controller driver is unbound and bound again via sysfs attributes, the controller driver will fail to probe the second time because it fails to access the controller DBI, which returns all zeroes unless the core reset is toggled. The following commands trigger this fault on R-Car V4H: $ echo e65d0000.pcie > /sys/bus/platform/drivers/pcie-rcar-gen4/unbind $ echo e65d0000.pcie > /sys/bus/platform/drivers/pcie-rcar-gen4/bind Fixes: faf5a975ee3b ("PCI: rcar-gen4: Add support for R-Car V4H") Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> [mani: added fixes tag and cced noautosel] Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: <stable+noautosel@kernel.org> # DTS dependency Link: https://patch.msgid.link/20260903205153.283553-3-marek.vasut+renesas@mailbox.org
2026-09-22PCI: rcar-gen4: Add support for R-Car X5H PCIe4Marek Vasut
Add support for R8A78000 (R-Car X5H) PCIe4. This driver previously supported R-Car Gen4 S4/V4H/V4M. PCIe features of R-Car X5H PCIe4 are almost all the same. The controller initialization sequence is slightly different and is factored out into controller-specific callbacks, in a manner similar to previous R-Car Gen4 handling. The controller does have a PHY attached to it, but the PHY is operated by a separate PHY driver. The PHY driver instance binding is handled in rcar_gen4_pcie_get_resources() and controlled in the aforementioned controller-specific callbacks. The controller driver is deliberately using "renesas,rcar-gen5-pcie4" DT compatible string to discern R-Car X5H PCIe4 controller supported by this driver, from R-Car X5H PCIe6 controller which will most likely use a separate driver. The R-Car X5H PCIe4 controller embeds HDMA instead of EDMA embedded in the R-Car Gen4 PCIe controller, "dw-edma" driver supports both DMA variants. Endpoint mode is currently not implemented for R-Car Gen5 PCIe4. Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Link: https://patch.msgid.link/20260921202823.72620-7-marek.vasut+renesas@mailbox.org
2026-09-22PCI: rcar-gen4: Handle PERST# via reset subsystemMarek Vasut
Handle PERST# via both GPIO and reset subsystem. On R-Car Gen4, the PERST# signal is operated as a GPIO, on R-Car Gen5 it might only be accessible via SCMI reset via reset subsystem. Support both options. This is a preparatory work for R-Car Gen5 support. Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Link: https://patch.msgid.link/20260921202823.72620-6-marek.vasut+renesas@mailbox.org
2026-09-22PCI: rcar-gen4: Add .speed_control() callbackMarek Vasut
Introduce new rcar_gen4_pcie_drvdata->speed_control() callback and implement it on R-Car Gen4. The callback implements the second half of what is currently present in rcar_gen4_pcie_start_link(), and rcar_gen4_pcie_start_link() does call the .speed_control() callback. This is a preparatory work for R-Car Gen5 support, where the .speed_control() implementation is different. Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> [mani: commit log] Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Link: https://patch.msgid.link/20260921202823.72620-5-marek.vasut+renesas@mailbox.org
2026-09-22PCI: rcar-gen4: Add .deinit() callbackMarek Vasut
Add rcar_gen4_pcie_drvdata->deinit() callback in preparation for R-Car Gen5 support. The .deinit() callback will be used to tear down the PHY on R-Car Gen5. For now, it does what rcar_gen4_pcie_common_deinit() used to do directly. Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Link: https://patch.msgid.link/20260921202823.72620-4-marek.vasut+renesas@mailbox.org
2026-09-22PCI: rcar-gen4: Rework .additional_common_init() into .init()Marek Vasut
Rework the current complicated initialization callchain that invokes host_init->common_init->additional_common_init() for host and ep_init->common_init->additional_common_init() for endpoint into simpler host_init->init() and ep_init->init() . The init callback is now always implemented for all R-Car Gen4 SoCs; therefore there is no need to check whether the callback is not NULL. For R-Car S4, the .init() callback is rcar_gen4_pcie_common_init(), for R-Car V4H and V4M, the .init() callback is implemented using a new function rcar_gen4_v4h_v4m_pcie_init(), which calls the common rcar_gen4_pcie_common_init() followed by R-Car V4H- and V4M-specific hardware initialization. The hardware initialization sequence remains unchanged. Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com> [bhelgaas: drop 'dwc' tags, commit log typo] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Link: https://patch.msgid.link/20260921202823.72620-3-marek.vasut+renesas@mailbox.org
2026-09-22PCI: imx6: Update MPLLB bandwidth to improve i.MX95 Gen3 PCIe stabilityRichard Zhu
Poor bandwidth margins are observed during i.MX95 Gen3 PCIe tests with the default MPLLB_BANDWIDTH value (120). The margins worsened across voltage and temperature (VT) variations and different test matrices, potentially causing link stability issues. Testing with MPLLB_BANDWIDTH value of 140 (0x8c) shows significant improvement in bandwidth margins across all VT conditions and test scenarios. Implement PHY register write helper function and configure: - MPLLB_BW_OVRD_IN = 140 (0x8c) for improved bandwidth margin - MPLLB_BW_OVRD_EN to enable the override This ensures robust PCIe Gen3 performance across all operating conditions. Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com> [mani: added regmap_read() to flush IMX95_PCIE_PHY_CR_PARA_SEL update] Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Frank Li <Frank.Li@nxp.com> Link: https://patch.msgid.link/20260803034319.992323-1-hongxing.zhu@oss.nxp.com
2026-09-22PCI: imx6: Fix resource leaks in probe error pathsZhijian Han
imx_pcie_probe() leaks both pwrctrl devices and power domains on failure: - imx_pcie_attach_pd() attaches the "pcie" and "pcie_phy" power domains and adds device links to them, but nothing detaches the domains or removes the links on probe failure or deferral, so they leak. - A failure of devm_pm_runtime_set_active_enabled() returns directly without destroying the pwrctrl devices. - A partial failure inside imx_pcie_attach_pd() leaks the power domains that were already attached. Add imx_pcie_detach_pd_action() to remove the device links and detach the power domains in reverse order of acquisition and register it with devm_add_action_or_reset() so they are released automatically on probe failure. Fixes: 2c5768344f88 ("PCI: imx6: Move pci_pwrctrl_create_devices() to imx_pcie_probe()") Reported-by: sashiko-bot@kernel.org Link: https://lore.kernel.org/all/20260822013640.182C01F000E9@smtp.kernel.org/ Signed-off-by: Zhijian Han <hanzhijian1991@gmail.com> [mani: removed the imx_pcie_detach_pd() helper] Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com> [bhelgaas: update commit log to match inlining of imx_pcie_detach_pd() into imx_pcie_detach_pd_action()] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Link: https://patch.msgid.link/20260904012307.3434449-1-hanzhijian1991@gmail.com
2026-09-17PCI: Add missing headers transitively included by <linux/phy/phy.h>Vladimir Oltean
The tegra as well as a few dwc PCI controller drivers uses PM runtime operations without including the required <linux/pm_runtime.h> header. Similarly, pcie-rockchip-host, pcie-starfive as well as a few dwc PCI controllers use the regulator consumer API without including <linux/regulator/consumer.h>. pcie-spacemit-k1.c uses of_get_next_available_child() and of_node_put() without including <linux/of.h>. It seems these function prototypes were indirectly provided by <linux/phy/phy.h>, mostly by mistake (none of the functions it exports need it). Before the PHY header can drop the unnecessary includes, make sure the PCI controller drivers include what they use. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Link: https://patch.msgid.link/20260810124315.433448-3-vladimir.oltean@nxp.com
2026-09-17PCI: dra7xx: Fix clock enable leak on probe failureFelix Gu
dra7xx_pcie_probe() enables the optional clock but never disables it when probing fails afterwards. Switch to devm_clk_get_optional_enabled(), which disables the clock automatically on failure. Fixes: 5af9405397bf ("PCI: dra7xx: Get an optional clock") Signed-off-by: Felix Gu <ustc.gu@gmail.com> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com> Link: https://patch.msgid.link/20260822-dra7xx-v1-1-23e204d5548b@gmail.com
2026-09-17PCI: dra7xx: Remove device links to PHYvladimir.oltean@nxp.com
This is a full revert of commit 7a4db656a635 ("PCI: dra7xx: Create functional dependency between PCIe and PHY"). The trouble with this is that a PHY consumer driver dereferences fields from struct phy, which will become no longer possible. Since commit 987351e1ea77 ("phy: core: Add consumer device link support") from 2019, the PHY core also adds a device link to order PHY provider and consumer suspend/resume operations. The reverted functionality is from 2017 and is redundant with the PHY core now. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Aksh Garg <a-garg7@ti.com> Link: https://patch.msgid.link/20260912161440.1032188-3-vladimir.oltean@nxp.com
2026-09-17PCI: keystone: Remove device links to PHYvladimir.oltean@nxp.com
This is a partial revert of the device link pieces from commit 49229238ab47 ("PCI: keystone: Cleanup PHY handling"). The trouble with this is that a PHY consumer driver dereferences fields from struct phy, which will become no longer possible. Since commit 987351e1ea77 ("phy: core: Add consumer device link support") from 2019, the PHY core also adds a device link to order PHY provider and consumer suspend/resume operations. The reverted functionality is from 2018 and is redundant with the PHY core now. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Aksh Garg <a-garg7@ti.com> Link: https://patch.msgid.link/20260912161440.1032188-4-vladimir.oltean@nxp.com
2026-09-17PCI: imx6: Move clock enable after core reset assertionRichard Zhu
Commit 610fa91d9863 ("PCI: imx6: Assert PERST# before enabling regulators") inadvertently moved clock enablement before core reset assertion, breaking PCI device initialization on i.MX6Q Apalis platforms with ASM1061/ASM1062 SATA controllers connected: imx6q-pcie 1ffc000.pcie: host bridge /soc/pcie@1ffc000 ranges: imx6q-pcie 1ffc000.pcie: IO 0x0001f80000..0x0001f8ffff -> 0x0000000000 imx6q-pcie 1ffc000.pcie: MEM 0x0001000000..0x0001efffff -> 0x0001000000 imx6q-pcie 1ffc000.pcie: config reg[1] 0x01f00000 == cpu 0x01f00000 imx6q-pcie 1ffc000.pcie: iATU: unroll F, 4 ob, 4 ib, align 64K, limit 4G imx6q-pcie 1ffc000.pcie: Link: Only Gen1 is enabled imx6q-pcie 1ffc000.pcie: Link failed to come up. LTSSM: POLL_CONFIG imx6q-pcie 1ffc000.pcie: probe with driver imx6q-pcie failed with error -110 NOTE: It is not 100% clear if the issue is specific to the ASM1061/ASM1062 device or on the specific power-up sequence (reset vs cold-power-on). To fix this regression, restore the original sequence where clocks are enabled after asserting core reset and configuring the controller type. Fixes: 610fa91d9863 ("PCI: imx6: Assert PERST# before enabling regulators") Reported-by: Leonardo Costa <leoreis.costa@gmail.com> Closes: https://lore.kernel.org/all/bl7i3obu2clzsgeoct2a4mtfhv6typcjdqmgneropf3hpgwve6@n2m5uhlduw57/T/#u Reported-by: Franz Schnyder <fra.schnyder@gmail.com> Closes: https://lore.kernel.org/all/t65y5d54axtksbfs7r4olcefqhwm6m4dz3njgnrnf7fcotj74i@o7avoznlafbj/ Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com> [bhelgaas: move to pci/for-linus for v7.3] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: stable@vger.kernel.org # 7.2+ Link: https://patch.msgid.link/20260813095003.356062-1-hongxing.zhu@oss.nxp.com
2026-09-15dmaengine: dw-edma: Add changes to support Channel SeparationDevendra K Verma
HDMA supports configurable DMA channel register space separation which ranges from 256B to 32KB. Current implementation supports 256B as default for DMA channel register space. CPM6 supports the selection of channel register space via VSEC. The default value for channel register space for CPM6 is 512B. Updated the functions and methods to calculate the DMA channel registers base address as per the selected channel separation available as part of 'ch_space_sz'. Removed the unused function __dw_regs() and structs, namely dw_hdma_v0_ch and dw_hdma_v0_regs. Signed-off-by: Devendra K Verma <devverma@amd.com> Reviewed-by: Frank Li <Frank.Li@nxp.com> Link: https://patch.msgid.link/20260907101213.1917064-3-devverma@amd.com Signed-off-by: Vinod Koul <vkoul@kernel.org>