| Age | Commit message (Collapse) | Author |
|---|
|
There is no reason why the sun20i-ppu cannot be built as a module. So
change it to tristate.
Also enable it by default for ARCH_SUNXI since this driver is required
for some peripherals to work, and update the help text to reflect this
requirement.
This aligns it with the new PCK-600 driver.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Link: https://lore.kernel.org/r/20250712074021.805953-5-wens@kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Allwinner A523 family has a second power controller, named PCK-600 in
the datasheets and BSP. It is likely based on ARM's PCK-600 hardware
block, with some additional delay controls. The only documentation for
this hardware is the BSP driver. The standard registers defined in ARM's
Power Policy Unit Architecture Specification line up. Some extra delay
controls are found in the reserved range of registers.
Add a driver for this power controller. Delay control register values
and power domain names are from the BSP driver.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Link: https://lore.kernel.org/r/20250712074021.805953-4-wens@kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
A523 has a PPU like the one in the Allwinner D1 SoC.
Add a compatible entry and a list of power domain names for it.
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Link: https://lore.kernel.org/r/20250712074021.805953-3-wens@kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
The Allwinner Power Reset Clock Management (RPCM) block contains a few
bits that control some power domains. The most prominent one is the one
for the Mali GPU. On the Allwinner H6 this domain is enabled at reset, so
we didn't care about it so far, but the H616 defaults to it being disabled.
Add a power domain driver for those bits. Some BSP code snippets and
some spare documentation describe three bits, slightly different between
the H6 and H616, so add three power domains for each SoC, connected to
their compatible string.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Link: https://lore.kernel.org/r/20250416224839.9840-3-andre.przywara@arm.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
V853 has a similar ppu like Allwinner D1, add compatible and the available pd names.
Signed-off-by: Andras Szemzo <szemzo.andras@gmail.com>
Link: https://lore.kernel.org/r/20250205125225.1152849-7-szemzo.andras@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
The Kconfig option belongs closer to the corresponding implementation,
hence let's move it from the soc subsystem to the pmdomain subsystem.
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: Jernej Skrabec <jernej.skrabec@gmail.com>
Cc: Samuel Holland <samuel@sholland.org>
Cc: <linux-sunxi@lists.linux.dev>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
It has been pointed out that naming a subsystem "genpd" isn't very
self-explanatory and the acronym itself that means Generic PM Domain, is
known only by a limited group of people.
In a way to improve the situation, let's rename the subsystem to pmdomain,
which ideally should indicate that this is about so called Power Domains or
"PM domains" as we often also use within the Linux Kernel terminology.
Suggested-by: Rafael J. Wysocki <rafael@kernel.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230912221127.487327-1-ulf.hansson@linaro.org
|
