| Age | Commit message (Collapse) | Author |
|---|
|
The Renesas RZ/T2H (R9A09G077) and RZ/N2H (R9A09G087) SoCs expose the
temperature calibration data via SMC SIP calls.
To prepare for supporting these SoCs, do the following changes.
Rename rzg3e_thermal_parse_dt() to rzg3e_thermal_get_syscon_trim().
Move the syscon usage out of rzg3e_thermal_get_calibration() and into
rzg3e_thermal_get_syscon_trim() and remove single-use variables from the
private state.
Place a pointer to rzg3e_thermal_get_syscon_trim() into the
chip-specific struct, and use it in the probe function to retrieve the
calibration values.
Now that syscon usage has been moved out of
rzg3e_thermal_get_calibration(), remove it and inline the calibration
validation into the probe function.
Also, reuse the TSU_CODE_MAX macro to mask the calibration values, as
GEMASK(11, 0) and 0xFFF are equivalent, and replace the hardcoded 0xFFF
with TSU_CODE_MAX in the calibration validation.
Reviewed-by: John Madieu <john.madieu.xa@bp.renesas.com>
Tested-by: John Madieu <john.madieu.xa@bp.renesas.com>
Signed-off-by: Cosmin Tanislav <cosmin-gabriel.tanislav.xa@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260108195223.193531-4-cosmin-gabriel.tanislav.xa@renesas.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
The Renesas RZ/T2H (R9A09G077) and RZ/N2H (R9A09G087) SoCs have
different minimum and maximum temperatures compared to the already
supported RZ/G3E.
Prepare for them by moving these into a chip-specific struct.
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: John Madieu <john.madieu.xa@bp.renesas.com>
Tested-by: John Madieu <john.madieu.xa@bp.renesas.com>
Signed-off-by: Cosmin Tanislav <cosmin-gabriel.tanislav.xa@renesas.com>
Link: https://patch.msgid.link/20260108195223.193531-3-cosmin-gabriel.tanislav.xa@renesas.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
The Renesas RZ/T2H (R9A09G077) and RZ/N2H (R9A09G087) SoCs do not have a
reset line.
Prepare for them by making it optional.
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: John Madieu <john.madieu.xa@bp.renesas.com>
Tested-by: John Madieu <john.madieu.xa@bp.renesas.com>
Signed-off-by: Cosmin Tanislav <cosmin-gabriel.tanislav.xa@renesas.com>
Link: https://patch.msgid.link/20260108195223.193531-2-cosmin-gabriel.tanislav.xa@renesas.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Use clamp() to simplify bcm2835_thermal_temp2adc() and improve its
readability. Explicitly cast BIT() to int to prevent a signedness error.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://patch.msgid.link/20260105121308.1761-1-thorsten.blum@linux.dev
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Use predefined HZ_PER_MHZ instead of a custom one. No functional changes.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20260114092808.273695-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Add support for MT7987.
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Link: https://patch.msgid.link/20251223175710.25850-3-linux@fw-web.de
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Add LVTS driver support for MT8196.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: Frank Wunderlich <frank-w@public-files.de>
Signed-off-by: Laura Nao <laura.nao@collabora.com>
Link: https://patch.msgid.link/20251125-mt8196-lvts-v4-v5-7-6db7eb903fb7@collabora.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
On MT8196/MT6991, per-sensor calibration data read from eFuses is
16-bit. When the LVTS controller operates in 16-bit mode, a fixed offset
must be added to MSR values during post-processing to obtain correct
temperature readings. Introduce a new msr_offset field in lvts_data,
program the respective register and apply the offset to the calibration
data read from eFuses.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: Frank Wunderlich <frank-w@public-files.de>
Signed-off-by: Laura Nao <laura.nao@collabora.com>
Link: https://patch.msgid.link/20251125-mt8196-lvts-v4-v5-6-6db7eb903fb7@collabora.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
MT8196/MT6991 uses ATP (Abnormal Temperature Prevention) mode to detect
abnormal temperature conditions, which involves reading temperature data
from a dedicated set of registers separate from the ones used for
immediate and filtered modes.
Add support for ATP mode and its relative registers to ensure accurate
temperature readings and proper thermal management on MT8196/MT6991
devices.
While at it, convert mode defines to enum.
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Fei Shao <fshao@chromium.org>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: Frank Wunderlich <frank-w@public-files.de>
Signed-off-by: Laura Nao <laura.nao@collabora.com>
Link: https://patch.msgid.link/20251125-mt8196-lvts-v4-v5-5-6db7eb903fb7@collabora.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
MT8196/MT6991 require a different version of lvts_temp_to_raw(),
specifically the multiplicative inverse of the existing implementation.
Introduce a variant of the function with inverted calculation logic to
match this requirement.
This ensures accurate raw value generation for temperature
thresholds, avoiding spurious thermal interrupts or unintended hardware
resets on MT8196/MT6991.
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Fei Shao <fshao@chromium.org>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: Frank Wunderlich <frank-w@public-files.de>
Signed-off-by: Laura Nao <laura.nao@collabora.com>
Link: https://patch.msgid.link/20251125-mt8196-lvts-v4-v5-4-6db7eb903fb7@collabora.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
conversion logic
Introduce lvts_platform_ops struct to support SoC-specific versions of
lvts_raw_to_temp() and lvts_temp_to_raw() conversion functions.
This is in preparation for supporting SoCs like MT8196/MT6991, which
require a different lvts_temp_to_raw() implementation.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Laura Nao <laura.nao@collabora.com>
Link: https://patch.msgid.link/20251125-mt8196-lvts-v4-v5-3-6db7eb903fb7@collabora.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
MT8196/MT6991 use 2-byte eFuse calibration data, whereas other SoCs
supported by the driver rely on 3 bytes. Make the number of calibration
bytes per sensor configurable, enabling support for SoCs with varying
calibration formats.
Signed-off-by: Laura Nao <laura.nao@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patch.msgid.link/20251125-mt8196-lvts-v4-v5-2-6db7eb903fb7@collabora.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Replace sprintf() with sysfs_emit() in sysfs show functions.
sysfs_emit() is preferred to format sysfs output as it provides better
bounds checking.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
[ rjw: Subject tweaks ]
Link: https://patch.msgid.link/20260113082130.789891-2-thorsten.blum@linux.dev
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Fix typo "nagative" -> "negative" for cpu argument value in
comment section.
Signed-off-by: Sumeet Pawnikar <sumeet4linux@gmail.com>
[ rjw: Subject tweak ]
Link: https://patch.msgid.link/20260111160739.15984-1-sumeet4linux@gmail.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
There is no need to use snprintf() with a format specifier to copy 'buf'
to 'name'; use strscpy() directly instead.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
[ rjw: Subject and changelog tweaks ]
Link: https://patch.msgid.link/20260112174901.767434-1-thorsten.blum@linux.dev
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Replace seq_printf() with seq_puts() when outputting a constant string
without format specifiers in the thermal mitigation debugfs interface.
seq_puts() is more appropriate and efficient as it avoids unnecessary
format string parsing overhead.
No functional change.
Signed-off-by: Sumeet Pawnikar <sumeet4linux@gmail.com>
Link: https://patch.msgid.link/20260110183912.372215-1-sumeet4linux@gmail.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Replace all sprintf() calls with sysfs_emit() and sysfs_emit_at() in
sysfs show functions.
sysfs_emit() and sysfs_emit_at() are preferred over sprintf() for
formatting sysfs output as they provide better bounds checking and
prevent potential buffer overflows.
Signed-off-by: Sumeet Pawnikar <sumeet4linux@gmail.com>
Link: https://patch.msgid.link/20260110092851.9078-1-sumeet4linux@gmail.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Replace sprintf() with sysfs_emit() and sysfs_emit_at() in sysfs show
functions.
sysfs_emit() and sysfs_emit_at() are preferred to format sysfs output
as they provide better bounds checking.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
[ rjw: Subject adjustment, changelog edits ]
Link: https://patch.msgid.link/20251220223026.125678-1-thorsten.blum@linux.dev
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
On processors starting from Panther Lake, additional workload type hints
are provided.
The hardware analyzes workload residencies over an extended period to
determine whether the workload classification tends toward idle/battery
life states or sustained/performance states. Based on this long-term
analysis, it classifies:
Power Classification: If the workload exhibits more idle or battery
life residencies, it is classified as "power". This is indicated by
setting bit 4 of the current workload type.
Performance Classification: If the workload exhibits more sustained
or performance residencies, it is classified as "performance". This
is indicated by clearing bit 4 of the current workload type.
This approach enables applications to ignore short-term workload
fluctuations and instead respond to longer-term power vs. performance
trends. Hints of this type are called slow workload hints.
To get notifications for slow workload hints, bit 22 in the thermal
mailbox can be used for configuring workload interrupts. It is possible
to exclusively enable slow workload hints or enable them in addition to
the current workload hints.
To enable slow workload hints, a new sysfs attribute is added to the
existing workload hint attributes:
workload_slow_hint_enable (RW): Write 1 to enable, 0 to disable.
Reading this attribute shows the current state.
This attribute is not present on any previous generation of processors.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
[ rjw: Dropped redundant local variables, changelog edits ]
Link: https://patch.msgid.link/20251218222559.4110027-2-srinivas.pandruvada@linux.intel.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Replace strlen() with the safer strnlen() and calculate the length of
the thermal zone name 'type' only once.
No functional changes.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
[ rjw: Subject edits ]
Link: https://patch.msgid.link/20251216130943.40180-2-thorsten.blum@linux.dev
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The driver uses devm_kzalloc() for device allocation, making the
pci_set_drvdata(pdev, NULL) call in the remove path unnecessary.
The driver core clears drvdata automatically during device removal.
Signed-off-by: Kaushlendra Kumar <kaushlendra.kumar@intel.com>
[ rjw: Subject rewrite ]
Link: https://patch.msgid.link/20251215091352.1250531-1-kaushlendra.kumar@intel.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Add Panther Lake, Wildcat Lake and Nova Lake CPU models in the support
list.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://patch.msgid.link/20251218195150.3872795-1-srinivas.pandruvada@linux.intel.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
s/tmperature/temperature/ and adjust the indentation of the @ops
parameter description to improve readability.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Link: https://patch.msgid.link/20251206174245.116391-2-thorsten.blum@linux.dev
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Set the PROC_THERMAL_FEATURE_SOC_POWER_SLIDER feature flag in
proc_thermal_pci_ids[] for Wildcat Lake to enable power slider interface.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://patch.msgid.link/20251205230007.2218533-1-srinivas.pandruvada@linux.intel.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"This is the first half of the driver changes:
- A treewide interface change to the "syscore" operations for power
management, as a preparation for future Tegra specific changes
- Reset controller updates with added drivers for LAN969x, eic770 and
RZ/G3S SoCs
- Protection of system controller registers on Renesas and Google
SoCs, to prevent trivially triggering a system crash from e.g.
debugfs access
- soc_device identification updates on Nvidia, Exynos and Mediatek
- debugfs support in the ST STM32 firewall driver
- Minor updates for SoC drivers on AMD/Xilinx, Renesas, Allwinner, TI
- Cleanups for memory controller support on Nvidia and Renesas"
* tag 'soc-drivers-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (114 commits)
memory: tegra186-emc: Fix missing put_bpmp
Documentation: reset: Remove reset_controller_add_lookup()
reset: fix BIT macro reference
reset: rzg2l-usbphy-ctrl: Fix a NULL vs IS_ERR() bug in probe
reset: th1520: Support reset controllers in more subsystems
reset: th1520: Prepare for supporting multiple controllers
dt-bindings: reset: thead,th1520-reset: Add controllers for more subsys
dt-bindings: reset: thead,th1520-reset: Remove non-VO-subsystem resets
reset: remove legacy reset lookup code
clk: davinci: psc: drop unused reset lookup
reset: rzg2l-usbphy-ctrl: Add support for RZ/G3S SoC
reset: rzg2l-usbphy-ctrl: Add support for USB PWRRDY
dt-bindings: reset: renesas,rzg2l-usbphy-ctrl: Document RZ/G3S support
reset: eswin: Add eic7700 reset driver
dt-bindings: reset: eswin: Documentation for eic7700 SoC
reset: sparx5: add LAN969x support
dt-bindings: reset: microchip: Add LAN969x support
soc: rockchip: grf: Add select correct PWM implementation on RK3368
soc/tegra: pmc: Add USB wake events for Tegra234
amba: tegra-ahb: Fix device leak on SMMU enable
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control updates from Rafael Wysocki:
"These add Nova Lake processor support to the Intel thermal drivers and
DPTF code, update thermal control documentation, simplify the ACPI
DPTF code related to thermal control, add QCS8300 compatible to the
tsens thermal DT bindings, add DT bindings for NXP i.MX91 thermal
module and add support for it to the imx91 thermal driver, update a
few other thermal drivers and fix a format string issue in a thermal
utility:
- Add Nova Lake processor thermal device to the int340x
processor_thermal driver, add DLVR support for Nova Lake to it, add
Nova Lake support to the ACPI DPTF code, document thermal
throttling on Intel platforms, and update workload type hint
interface documentation (Srinivas Pandruvada)
- Remove int340x thermal scan handler from the ACPI DPTF code because
it turned out to be unnecessary (Slawomir Rosek)
- Clean up the Intel int340x thermal driver (Kaushlendra Kumar)
- Document the RZ/V2H TSU DT bindings (Ovidiu Panait)
- Document the Kaanapali Temperature Sensor (Manaf Meethalavalappu
Pallikunhi)
- Document R-Car Gen4 and RZ/G2 support in driver comment (Marek
Vasut)
- Convert to DEFINE_SIMPLE_DEV_PM_OPS() in R-Car [Gen3] (Geert
Uytterhoeven)
- Fix format string bug in thermal-engine (Malaya Kumar Rout)
- Make ipq5018 tsens standalone compatible (George Moussalem)
- Add the QCS8300 compatible for QCom Tsens (Gaurav Kohli)
- Add support for the NXP i.MX91 thermal module, including the DT
bindings (Pengfei Li)"
* tag 'thermal-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal/drivers/imx91: Add support for i.MX91 thermal monitoring unit
dt-bindings: thermal: fsl,imx91-tmu: add bindings for NXP i.MX91 thermal module
dt-bindings: thermal: tsens: Add QCS8300 compatible
dt-bindings: thermal: qcom-tsens: make ipq5018 tsens standalone compatible
tools/thermal/thermal-engine: Fix format string bug in thermal-engine
docs: driver-api/thermal/intel_dptf: Add new workload type hint
thermal/drivers/rcar_gen3: Convert to DEFINE_SIMPLE_DEV_PM_OPS()
thermal/drivers/rcar: Convert to DEFINE_SIMPLE_DEV_PM_OPS()
Documentation: thermal: Document thermal throttling on Intel platforms
ACPI: DPTF: Support Nova Lake
thermal: intel: int340x: Add DLVR support for Nova Lake
thermal: int340x: processor_thermal: Add Nova Lake processor thermal device
thermal: intel: int340x: Replace sprintf() with sysfs_emit()
thermal: intel: int340x: Use symbolic constant for UUID comparison
thermal/drivers/rcar_gen3: Document R-Car Gen4 and RZ/G2 support in driver comment
dt-bindings: thermal: qcom-tsens: document the Kaanapali Temperature Sensor
dt-bindings: thermal: r9a09g047-tsu: Document RZ/V2H TSU
ACPI: DPTF: Remove int340x thermal scan handler
thermal: intel: Select INT340X_THERMAL from INTEL_SOC_DTS_THERMAL
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux
Pull thermal control changes for 6.19-rc1 from Daniel Lezcano:
"- Document the RZ/V2H TSU DT bindings (Ovidiu Panait)
- Document the Kaanapali Temperature Sensor (Manaf Meethalavalappu
Pallikunhi)
- Document R-Car Gen4 and RZ/G2 support in driver comment (Marek Vasut)
- Convert to DEFINE_SIMPLE_DEV_PM_OPS in the R-Car [Gen3] (Geert
Uytterhoeven)
- Fix format string bug in thermal-engine (Malaya Kumar Rout)
- Make ipq5018 tsens standalone compatible (George Moussalem)
- Add the QCS8300 compatible for the QCom Tsens (Gaurav Kohli)
- Add the support for the NXP i.MX91 thermal module, including the DT
bindings (Pengfei Li)
* tag 'thermal-v6.19-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux:
thermal/drivers/imx91: Add support for i.MX91 thermal monitoring unit
dt-bindings: thermal: fsl,imx91-tmu: add bindings for NXP i.MX91 thermal module
dt-bindings: thermal: tsens: Add QCS8300 compatible
dt-bindings: thermal: qcom-tsens: make ipq5018 tsens standalone compatible
tools/thermal/thermal-engine: Fix format string bug in thermal-engine
thermal/drivers/rcar_gen3: Convert to DEFINE_SIMPLE_DEV_PM_OPS()
thermal/drivers/rcar: Convert to DEFINE_SIMPLE_DEV_PM_OPS()
thermal/drivers/rcar_gen3: Document R-Car Gen4 and RZ/G2 support in driver comment
dt-bindings: thermal: qcom-tsens: document the Kaanapali Temperature Sensor
dt-bindings: thermal: r9a09g047-tsu: Document RZ/V2H TSU
|
|
Introduce support for the i.MX91 thermal monitoring unit, which features a
single sensor for the CPU. The register layout differs from other chips,
necessitating the creation of a dedicated file for this.
This sensor provides a resolution of 1/64°C (6-bit fraction). For actual
accuracy, refer to the datasheet, as it varies depending on the chip grade.
Provide an interrupt for end of measurement and threshold violation and
Contain temperature threshold comparators, in normal and secure address
space, with direction and threshold programmability.
Datasheet Link: https://www.nxp.com/docs/en/data-sheet/IMX91CEC.pdf
Signed-off-by: Pengfei Li <pengfei.li_1@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://patch.msgid.link/20251020-imx91tmu-v7-2-48d7d9f25055@nxp.com
|
|
The current read_raw() implementation of the TPMI, MMIO and MSR
interfaces does not distinguish between atomic and non-atomic callers.
rapl_msr_read_raw() uses rdmsrq_safe_on_cpu(), which can sleep and
issue cross CPU calls. When MSR-based RAPL PMU support is enabled, PMU
event handlers can invoke this function from atomic context where
sleeping or rescheduling is not allowed. In atomic context, the caller
is already executing on the target CPU, so a direct rdmsrq() is
sufficient.
To support such usage, introduce an atomic flag to the read_raw()
interface to allow callers pass the context information. Modify the
common RAPL code to propagate this flag, and set the flag to reflect
the calling contexts.
Utilize the atomic flag in rapl_msr_read_raw() to perform direct MSR
read with rdmsrq() when running in atomic context, and a sanity check
to ensure target CPU matches the current CPU for such use cases.
The TPMI and MMIO implementations do not require special atomic
handling, so the flag is ignored in those paths.
This is a preparatory patch for adding MSR-based RAPL PMU support.
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
[ rjw: Subject tweak ]
Link: https://patch.msgid.link/20251121000539.386069-2-sathyanarayanan.kuppuswamy@linux.intel.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Convert the Renesas R-Car Gen3 thermal driver from SIMPLE_DEV_PM_OPS()
to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr(). This lets us drop the
__maybe_unused annotation from its resume callback, and reduces kernel
size in case CONFIG_PM or CONFIG_PM_SLEEP is disabled.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://patch.msgid.link/813ad36fdc8561cf1c396230436e8ff3ff903a1f.1763117455.git.geert+renesas@glider.be
|
|
Convert the Renesas R-Car thermal driver from SIMPLE_DEV_PM_OPS() to
DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr(). This lets us drop the
check for CONFIG_PM_SLEEP, and reduces kernel size in case CONFIG_PM or
CONFIG_PM_SLEEP is disabled, while increasing build coverage.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://patch.msgid.link/ee03ec71d10fd589e7458fa1b0ada3d3c19dbb54.1763117351.git.geert+renesas@glider.be
|
|
Several drivers can benefit from registering per-instance data along
with the syscore operations. To achieve this, move the modifiable fields
out of the syscore_ops structure and into a separate struct syscore that
can be registered with the framework. Add a void * driver data field for
drivers to store contextual data that will be passed to the syscore ops.
Acked-by: Rafael J. Wysocki (Intel) <rafael@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Add Nova Lake ACPI IDs for DPTF.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://patch.msgid.link/20251111004552.137984-3-srinivas.pandruvada@linux.intel.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Add support for DLVR (Digital Linear Voltage Regulator) for Nova Lake.
There are no new sysfs attributes or difference in operations compared
to prior generations.
MMIO offset and bit positions are changed. Also no mapping is required
as units are already in MHz.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://patch.msgid.link/20251111004552.137984-2-srinivas.pandruvada@linux.intel.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Add PCI IDs for Nova Lake processor thermal device.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://patch.msgid.link/20251111004552.137984-1-srinivas.pandruvada@linux.intel.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Replace sprintf() calls with sysfs_emit() in sysfs "show" functions to
follow current kernel coding standards.
sysfs_emit() is the preferred method for formatting sysfs output as it
provides better bounds checking and is more secure.
Signed-off-by: Kaushlendra Kumar <kaushlendra.kumar@intel.com>
[ rjw: Subject adjustments, changelog edits ]
Link: https://patch.msgid.link/20251030053410.311656-1-kaushlendra.kumar@intel.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Replace sizeof() with a symbolic constant for UUID matching to maintain
existing ABI behavior while improving code clarity. The current behavior
of comparing only the first 7 characters is sufficient to distinguish
all UUIDs and changing to full string comparison would alter the kernel
ABI, potentially breaking existing userspace applications.
Use a defined constant to make the truncated comparison explicit and
maintainable.
Signed-off-by: Kaushlendra Kumar <kaushlendra.kumar@intel.com>
[ rjw: Subject adjustments ]
Link: https://patch.msgid.link/20251030035955.62171-1-kaushlendra.kumar@intel.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
comment
The R-Car Gen3 thermal driver supports both R-Car Gen3 and Gen4 SoCs
as well as RZ/G2. Update the driver comment. No functional change.
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Link: https://patch.msgid.link/20251110143029.10940-1-marek.vasut+renesas@mailbox.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
The IRQ used by the Intel SoC DTS thermal device for critical
overheating notification is listed in _CRS of device INT3401 which
therefore needs to be enumerated for Intel SoC DTS thermal to work.
The enumeration happens by binding the int3401_thermal driver to the
INT3401 platform device. Thus CONFIG_INT340X_THERMAL is in fact
necessary for enumerating it, so checking CONFIG_INTEL_SOC_DTS_THERMAL
in int340x_thermal_handler_attach() is pointless and INT340X_THERMAL
may as well be selected by INTEL_SOC_DTS_THERMAL.
Signed-off-by: Slawomir Rosek <srosek@google.com>
[ rjw: New subject ]
Link: https://patch.msgid.link/20251103162516.2606158-2-srosek@google.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
- Restore sort order in MAINTAINERS and Kconfig,
- Remove empty trailing line from Makefile.
Fixes: 19d3a401a617c68e ("thermal/drivers/renesas/rzg3e: Add thermal driver for the Renesas RZ/G3E SoC")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux
Merge a thermal driver fix for 6.18 from Daniel Lezcano:
"- Add missing file when importing conflicting change for the Renesas
RZ/G3E thermal driver (Daniel Lezcano)"
* tag 'thermal-v6.18-rc1-2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux:
thermal/drivers/renesas/rzg3e: Fix add thermal driver for the Renesas RZ/G3E SoC
|
|
When applied the change commit 19d3a401a617, a conflict appeared
resulting into a manual fix. However the new file rzg3e_thermal.c was
not added but stayed locally in source tree and miss to be merged with
the entire change.
Fix this by adding the file back.
Fixes: 19d3a401a617 ("Add thermal driver for the Renesas RZ/G3E SoC")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202509272225.sARVqv2G-lkp@intel.com
Signed-off-by: John Madieu <john.madieu.xa@bp.renesas.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux
Merge updates of thermal drivers for 6.18-rc1 from Daniel Lezcano:
"- Add the QCS615 compatible DT bindings for QCom platforms (Gaurav
Kohli)
- Support fallback trimming values when the fuse is empty in the R-Car
driver (Marek Vasut)
- Remove unneeded semicolon in the Mediatek LVTS driver (Jiapeng
Chong)
- Fix the LMH Kconfig option by selecting QCOM_SCM and take the
opportunity to add the COMPILE_TEST option for the QCom's LMH
feature (Dmitry Baryshkov)
- Fix the missing includes and incorrect error message in the Qcom's
LMH driver (Dmitry Baryshkov)
- Fix comment typo and add the documentation in the Kconfig for the
R-Car Gen3 and Gen4 (Marek Vasut)
- Add Tegra114 SOCTHERM support (Svyatoslav Ryhel)
- Rename the functions name in the driver to be consistent and generic
with the different R-Car platform variants (Wolfram Sang)
- Register the TI K3 J72xx bandgap sensor as a hwmon sensor too
(Michael Walle)
- Add and document the thermal sensor unit reporting the junction
temperature of the RZ/G3S SoC (Claudiu Beznea)
- Support the GRF in the Rockchip driver (Sebastian Reichel)
- Add a temperature IIO sensor channel in the generic thermal ADC
driver (Svyatoslav Ryhel)
- Document the temperature sensor on the QCOM's Glymur platform (Manaf
Meethalavalappu)
- Add and document the thermal sensor unit reporting the junction
temperature of the RZ/G3E SoC (John Madieu)"
* tag 'thermal-v6.18-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux: (24 commits)
dt-bindings: thermal: qcom-tsens: Document the Glymur temperature Sensor
thermal/drivers/renesas/rzg3e: Add thermal driver for the Renesas RZ/G3E SoC
dt-bindings: thermal: r9a09g047-tsu: Document the TSU unit
thermal/drivers/thermal-generic-adc: Add temperature sensor channel
dt-bindings: thermal: rockchip: Tighten grf requirements
thermal/drivers/rockchip: Shut up GRF warning
thermal/drivers/rockchip: Unify struct rockchip_tsadc_chip format
thermal/drivers/renesas/rzg3s: Add thermal driver for the Renesas RZ/G3S SoC
dt-bindings: thermal: r9a08g045-tsu: Document the TSU unit
thermal/drivers/k3_j72xx_bandgap: Register sensors with hwmon
thermal/drivers/rcar_gen3: Fix mapping SoCs to generic Gen4 entry
thermal/drivers/tegra: Add Tegra114 specific SOCTHERM driver
dt-bindings: thermal: add Tegra114 soctherm header
thermal/drivers/tegra/soctherm-fuse: Prepare calibration for Tegra114 support
dt-bindings: thermal: Document Tegra114 SOCTHERM Thermal Management System
thermal/drivers/rcar_gen3: Document Gen4 support in Kconfig entry
thermal/drivers/rcar_gen3: Fix comment typo
drivers/thermal/qcom/lmh: Fix incorrect error message
thermal/drivers/qcom/lmh: Add missing IRQ includes
thermal/drivers/qcom: Make LMH select QCOM_SCM
...
|
|
Merge an adjustment of the new Power Slider interface in the int340x
thermal driver.
* thermal-intel:
thermal: intel: int340x: Power Slider: Validate slider_balance range
|
|
The RZ/G3E SoC integrates a Temperature Sensor Unit (TSU) block designed
to monitor the chip's junction temperature. This sensor is connected to
channel 1 of the APB port clock/reset and provides temperature measurements.
It also requires calibration values stored in the system controller registers
for accurate temperature measurement. Add a driver for the Renesas RZ/G3E TSU.
[ dlezcano: Fixed conflict with "renesas: Add support for RZ/G3S" ]
Signed-off-by: John Madieu <john.madieu.xa@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20250917170202.197929-3-john.madieu.xa@bp.renesas.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
To avoid duplicating sensor functionality and conversion tables, this
design allows converting an ADC IIO channel's output directly into a
temperature IIO channel. This is particularly useful for devices where
hwmon isn't suitable or where temperature data must be accessible through
IIO.
One such device is, for example, the MAX17040 fuel gauge.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20250903162749.109910-2-clamor95@gmail.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Most of the recent Rockchip devices do not have a GRF associated
with the tsadc IP. Let's avoid printing a warning on those devices.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Dragan Simic <dsimic@manjaro.org>
Tested-by: Diederik de Haas <didi.debian@cknow.org>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20250820-thermal-rockchip-grf-warning-v2-2-c7e2d35017b8@kernel.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Unify all chip descriptions to the version without any empty
lines.
Suggested-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Dragan Simic <dsimic@manjaro.org>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20250820-thermal-rockchip-grf-warning-v2-1-c7e2d35017b8@kernel.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
The Renesas RZ/G3S SoC features a Thermal Sensor Unit (TSU) that reports
the junction temperature. The temperature is reported through a dedicated
ADC channel. Add a driver for the Renesas RZ/G3S TSU.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20250810122125.792966-3-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Make the sensors available in the hwmon subsystem (if
CONFIG_THERMAL_HWMON is enabled).
Signed-off-by: Michael Walle <mwalle@kernel.org>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://lore.kernel.org/r/20250828124042.1680853-1-mwalle@kernel.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
