summaryrefslogtreecommitdiff
path: root/drivers/tty/serial/8250/Kconfig
AgeCommit message (Collapse)Author
2025-11-26serial: 8250: Add Loongson uart driver supportBinbin Zhou
Add the driver for on-chip UART used on Loongson family chips. The hardware is similar to NS16550A, but there are the following differences: - Some chips (such as Loongson-2K2000) have added a fractional division register to obtain the required baud rate accurately, so the {get,set}_divisor callback is overridden. - Due to hardware defects, quirk handling is required for UART_MCR/UART_MSR. Co-developed-by: Haowei Zheng <zhenghaowei@loongson.cn> Signed-off-by: Haowei Zheng <zhenghaowei@loongson.cn> Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn> Reviewed-by: Huacai Chen <chenhuacai@loongson.cn> Link: https://patch.msgid.link/2c2a01a276b9250efea0c7aa190efecdfd6fdf5a.1760166651.git.zhoubinbin@loongson.cn Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-11-26serial: 8250: add driver for KEBA UARTGerhard Engleder
The KEBA UART is found in the system FPGA of KEBA PLC devices. It is mostly 8250 compatible with extension for some UART modes. 3 different variants exist. The simpliest variant supports only RS-232 and is used for debug interfaces. The next variant supports only RS-485 and is used mostly for communication with KEBA panel devices. The third variant is able to support RS-232, RS-485 and RS-422. For this variant not only the mode of the UART is configured, also the physics and transceivers are switched according to the mode. Signed-off-by: Gerhard Engleder <eg@keba.com> Tested-by: Daniel Gierlinger <gida@keba.com> Reviewed-by: Lukas Wunner <lukas@wunner.de> Link: https://patch.msgid.link/20251023151229.11774-3-gerhard@engleder-embedded.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-11-21serial: drop SERIAL_8250_DEPRECATED_OPTIONSJiri Slaby (SUSE)
In 3.7, 8250 was unintentionally renamed to 8250_core. This happened in the commit 835d844d1a28 (8250_pnp: do pnp probe before legacy probe). This made 8250.<xxxx> module options effectively defunct. Instead, 8250_core.<xxxx> worked. In 3.9, the commit f2b8dfd9e480 (serial: 8250: Keep 8250.<xxxx> module options functional after driver rename) made the original options work again by introducing a hack. Later in 3.9, the commit 9196d8acd7f9 (TTY: 8250, revert module name change) changed the module name back to 8250 (from 8250_core). Since then, the hack was there to support the transient 8250_core.<xxxx> options. Those were present only in the 3.7..3.9 range. These transient options were deprecated by 9326b047e4fd (TTY: 8250, deprecated 8250_core.* options) in v3.9 too. Now, after those 12 years, it is time to get rid of this hack completely. Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org> Link: https://patch.msgid.link/20251119092457.826789-4-jirislaby@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-04-11serial: 8250_ni: Tidy up ACPI ID tableAndy Shevchenko
Tidy up ACPI ID table: - drop ACPI_PTR() and hence replace acpi.h with mod_devicetable.h et al. - drop comma in the terminator entry With that done, extend compile test coverage. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Chaitanya Vadrevu <chaitanya.vadrevu@emerson.com> Reviewed-by: Chaitanya Vadrevu <chaitanya.vadrevu@emerson.com> Link: https://lore.kernel.org/r/20250321182119.454507-8-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-03-20serial: 8250: add driver for NI UARTsChaitanya Vadrevu
The National Instruments (NI) 16550 is a 16550-like UART with larger FIFOs and embedded RS-232/RS-485 transceiver control circuitry. This patch adds a driver that can operate this UART, which is used for onboard serial ports in several NI embedded controller designs. Portions of this driver were originally written by Jaeden Amero and Karthik Manamcheri, with extensive cleanups and refactors since by Brenda Streiff. Cc: Gratian Crisan <gratian.crisan@emerson.com> Co-developed-by: Jason Smith <jason.smith@emerson.com> Signed-off-by: Jason Smith <jason.smith@emerson.com> Signed-off-by: Chaitanya Vadrevu <chaitanya.vadrevu@emerson.com> Link: https://lore.kernel.org/r/a3b0df6d-1dd5-4cc4-a7e1-4ed51fb9e4cc@emerson.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-02-06Revert "serial: Airoha SoC UART and HSUART support"Greg Kroah-Hartman
This reverts commit e12ebf14fa3654f68589292e645ae1ef74786638. It causes build errors in linux-next. Cc: Benjamin Larsson <benjamin.larsson@genexis.eu> Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Link: https://lore.kernel.org/r/20250206135328.4bad1401@canb.auug.org.au Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-02-04serial: Airoha SoC UART and HSUART supportBenjamin Larsson
Support for Airoha AN7581 SoC UART and HSUART baud rate calculation routine. Signed-off-by: Benjamin Larsson <benjamin.larsson@genexis.eu> Link: https://lore.kernel.org/r/20250119130105.2833517-3-benjamin.larsson@genexis.eu Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-11-30Merge tag 'tty-6.13-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty / serial driver updates from Greg KH: "Here is a small set of tty and serial driver updates for 6.13-rc1. Nothing major at all this time, only some small changes: - few device tree binding updates - 8250_exar serial driver updates - imx serial driver updates - sprd_serial driver updates - other tiny serial driver updates, full details in the shortlog All of these have been in linux-next for a while with one reported issue, but that commit has now been reverted" * tag 'tty-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (37 commits) Revert "serial: sh-sci: Clean sci_ports[0] after at earlycon exit" serial: amba-pl011: fix build regression dt-bindings: serial: Add a new compatible string for ums9632 serial: sprd: Add support for sc9632 tty/serial/altera_uart: unwrap error log string tty/serial/altera_jtaguart: unwrap error log string serial: amba-pl011: Fix RX stall when DMA is used tty: ldsic: fix tty_ldisc_autoload sysctl's proc_handler serial: 8250_fintek: Add support for F81216E serial: sh-sci: Clean sci_ports[0] after at earlycon exit tty: atmel_serial: Fix typo retreives to retrieves tty: atmel_serial: Use devm_platform_ioremap_resource() serial: 8250: omap: Move pm_runtime_get_sync tty: serial: samsung: Add Exynos8895 compatible dt-bindings: serial: samsung: Add samsung,exynos8895-uart compatible serial: 8250_dw: Add Sophgo SG2044 quirk dt-bindings: serial: snps-dw-apb-uart: Add Sophgo SG2044 uarts dt-bindings: serial: snps,dw-apb-uart: merge duplicate compatible entry. altera_jtaguart: Use dev_err() to report error attaching IRQ altera_uart: Use dev_err() to report error attaching IRQ handler ...
2024-10-28tty: serial: handle HAS_IOPORT dependenciesNiklas Schnelle
In a future patch HAS_IOPORT=n will disable inb()/outb() and friends at compile time. We thus need to add HAS_IOPORT as dependency for those drivers using them unconditionally. Some 8250 serial drivers support MMIO only use, so fence only the parts requiring I/O ports and print an error message if a device can't be supported with the current configuration. Co-developed-by: Arnd Bergmann <arnd@kernel.org> Signed-off-by: Arnd Bergmann <arnd@kernel.org> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Maciej W. Rozycki <macro@orcam.me.uk> Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-10-11serial: 8250_exar: Replace custom EEPROM read with eeprom_93cx6Parker Newman
Replace the custom 93cx6 EEPROM read functions with the eeprom_93cx6 driver. This removes duplicate code and improves code readability. Replace exar_ee_read() calls with eeprom_93cx6_read() or eeprom_93cx6_multiread(). Add "select EEPROM_93CX6" to config SERIAL_8250_EXAR to ensure eeprom_93cx6 driver is also compiled when 8250_exar driver is selected. Note: Old exar_ee_read() and associated functions are removed in next patch in this series. Link to mailing list discussion with Andy Shevchenko for reference. Link: https://lore.kernel.org/linux-serial/Ztr5u2wEt8VF1IdI@black.fi.intel.com/ Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Parker Newman <pnewman@connecttech.com> Link: https://lore.kernel.org/r/1bf2214ae27130ca58b9e779c4d65a0e5db06fc1.1727880931.git.pnewman@connecttech.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-03-02serial: 8250_exar: Use 8250 PCI library to map and assign resourcesAndy Shevchenko
8250 PCI library provides a common code to map and assign resources. Use it in order to deduplicate existing code and support IO port variants. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20240219150627.2101198-7-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-11-03Merge tag 'tty-6.7-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty and serial updates from Greg KH: "Here is the big set of tty/serial driver changes for 6.7-rc1. Included in here are: - console/vgacon cleanups and removals from Arnd - tty core and n_tty cleanups from Jiri - lots of 8250 driver updates and cleanups - sc16is7xx serial driver updates - dt binding updates - first set of port lock wrapers from Thomas for the printk fixes coming in future releases - other small serial and tty core cleanups and updates All of these have been in linux-next for a while with no reported issues" * tag 'tty-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (193 commits) serdev: Replace custom code with device_match_acpi_handle() serdev: Simplify devm_serdev_device_open() function serdev: Make use of device_set_node() tty: n_gsm: add copyright Siemens Mobility GmbH tty: n_gsm: fix race condition in status line change on dead connections serial: core: Fix runtime PM handling for pending tx vgacon: fix mips/sibyte build regression dt-bindings: serial: drop unsupported samsung bindings tty: serial: samsung: drop earlycon support for unsupported platforms tty: 8250: Add note for PX-835 tty: 8250: Fix IS-200 PCI ID comment tty: 8250: Add Brainboxes Oxford Semiconductor-based quirks tty: 8250: Add support for Intashield IX cards tty: 8250: Add support for additional Brainboxes PX cards tty: 8250: Fix up PX-803/PX-857 tty: 8250: Fix port count of PX-257 tty: 8250: Add support for Intashield IS-100 tty: 8250: Add support for Brainboxes UP cards tty: 8250: Add support for additional Brainboxes UC cards tty: 8250: Remove UC-257 and UC-431 ...
2023-09-18tty: serial: 8250_exar: Does not use anything from 8250_pciIlpo Järvinen
8250_exar includes linux/8250_pci.h and depends on SERIAL_8250_PCI. Neither is necessary so this patch removes the include and changes the depends on to SERIAL_8250 && PCI (taken from SERIAL_8250_PCI). Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20230915094336.13278-2-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-09-11arch: Remove Itanium (IA-64) architectureArd Biesheuvel
The Itanium architecture is obsolete, and an informal survey [0] reveals that any residual use of Itanium hardware in production is mostly HP-UX or OpenVMS based. The use of Linux on Itanium appears to be limited to enthusiasts that occasionally boot a fresh Linux kernel to see whether things are still working as intended, and perhaps to churn out some distro packages that are rarely used in practice. None of the original companies behind Itanium still produce or support any hardware or software for the architecture, and it is listed as 'Orphaned' in the MAINTAINERS file, as apparently, none of the engineers that contributed on behalf of those companies (nor anyone else, for that matter) have been willing to support or maintain the architecture upstream or even be responsible for applying the odd fix. The Intel firmware team removed all IA-64 support from the Tianocore/EDK2 reference implementation of EFI in 2018. (Itanium is the original architecture for which EFI was developed, and the way Linux supports it deviates significantly from other architectures.) Some distros, such as Debian and Gentoo, still maintain [unofficial] ia64 ports, but many have dropped support years ago. While the argument is being made [1] that there is a 'for the common good' angle to being able to build and run existing projects such as the Grid Community Toolkit [2] on Itanium for interoperability testing, the fact remains that none of those projects are known to be deployed on Linux/ia64, and very few people actually have access to such a system in the first place. Even if there were ways imaginable in which Linux/ia64 could be put to good use today, what matters is whether anyone is actually doing that, and this does not appear to be the case. There are no emulators widely available, and so boot testing Itanium is generally infeasible for ordinary contributors. GCC still supports IA-64 but its compile farm [3] no longer has any IA-64 machines. GLIBC would like to get rid of IA-64 [4] too because it would permit some overdue code cleanups. In summary, the benefits to the ecosystem of having IA-64 be part of it are mostly theoretical, whereas the maintenance overhead of keeping it supported is real. So let's rip off the band aid, and remove the IA-64 arch code entirely. This follows the timeline proposed by the Debian/ia64 maintainer [5], which removes support in a controlled manner, leaving IA-64 in a known good state in the most recent LTS release. Other projects will follow once the kernel support is removed. [0] https://lore.kernel.org/all/CAMj1kXFCMh_578jniKpUtx_j8ByHnt=s7S+yQ+vGbKt9ud7+kQ@mail.gmail.com/ [1] https://lore.kernel.org/all/0075883c-7c51-00f5-2c2d-5119c1820410@web.de/ [2] https://gridcf.org/gct-docs/latest/index.html [3] https://cfarm.tetaneutral.net/machines/list/ [4] https://lore.kernel.org/all/87bkiilpc4.fsf@mid.deneb.enyo.de/ [5] https://lore.kernel.org/all/ff58a3e76e5102c94bb5946d99187b358def688a.camel@physik.fu-berlin.de/ Acked-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2023-06-13serial: 8250: Apply FSL workarounds also without SERIAL_8250_CONSOLEUwe Kleine-König
The need to handle the FSL variant of 8250 in a special way is also present without console support. So soften the dependency for SERIAL_8250_FSL from SERIAL_8250_CONSOLE to SERIAL_8250. To handle SERIAL_8250=m, the FSL code can be modular, too, thus SERIAL_8250_FSL becomes tristate. Compiling 8250_fsl as a module requires adding a module license so this is added, too. While add it also add a appropriate module description. As then SERIAL_OF_PLATFORM=y + SERIAL_8250_FSL=m is a valid combination (if COMPILE_TEST is enabled on a platform that is neither PPC, ARM nor ARM64), the check in 8250_of.c must be weakened a bit. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Message-ID: <20230609133932.786117-3-u.kleine-koenig@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-05-30serial: Indicate fintek option may also be required for RS232 supportJames Hilliard
The current config comment for SERIAL_8250_FINTEK implies that this option is only needed when one wants to support RS485. As it turns out we also need to enable this option for RS232 support to function correctly on some variants. For example for variants such as the F71869AD attempting to use multiple RS232 ports simultaneously without this option enabled can result in data corruption. Signed-off-by: James Hilliard <james.hilliard1@gmail.com> Link: https://lore.kernel.org/r/20230521075046.3539376-1-james.hilliard1@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-09serial: 8250_pci1xxxx: Disable SERIAL_8250_PCI1XXXX config by defaultKumaravel Thiagarajan
Commit 32bb477fa7bf ("serial: 8250_pci1xxxx: Add driver for quad-uart support") made the SERIAL_8250_PCI1XXXX driver enabled when SERIAL_8250 is enabled, disable it as this driver does not need to be enabled by default Fixes: 32bb477fa7bf ("serial: 8250_pci1xxxx: Add driver for quad-uart support") Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Link: https://lore.kernel.org/lkml/CAHk-=whhFCeeuo6vTEmNSx6S-KKkugxgzN_W5Z6v-9yH9gc3Zw@mail.gmail.com/ Signed-off-by: Kumaravel Thiagarajan <kumaravel.thiagarajan@microchip.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20230305145124.13444-1-kumaravel.thiagarajan@microchip.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-09serial: 8250: ASPEED_VUART: select REGMAP instead of depending on itRandy Dunlap
REGMAP is a hidden (not user visible) symbol. Users cannot set it directly thru "make *config", so drivers should select it instead of depending on it if they need it. Consistently using "select" or "depends on" can also help reduce Kconfig circular dependency issues. Therefore, change the use of "depends on REGMAP" to "select REGMAP". Fixes: 8d310c9107a2 ("drivers/tty/serial/8250: Make Aspeed VUART SIRQ polarity configurable") Cc: stable <stable@kernel.org> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Oskar Senft <osk@google.com> Cc: linux-serial@vger.kernel.org Link: https://lore.kernel.org/r/20230226053953.4681-9-rdunlap@infradead.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-02-08serial: 8250_pci1xxxx: Add driver for quad-uart supportKumaravel Thiagarajan
pci1xxxx is a PCIe switch with a multi-function endpoint on one of its downstream ports. Quad-uart is one of the functions in the multi-function endpoint. This driver loads for the quad-uart and enumerates single or multiple instances of uart based on the PCIe subsystem device ID. Co-developed-by: Tharun Kumar P <tharunkumar.pasumarthi@microchip.com> Signed-off-by: Tharun Kumar P <tharunkumar.pasumarthi@microchip.com> Signed-off-by: Kumaravel Thiagarajan <kumaravel.thiagarajan@microchip.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20230207164814.3104605-3-kumaravel.thiagarajan@microchip.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-02-08serial: 8250_pci: Add serial8250_pci_setup_port definition in 8250_pcilib.cKumaravel Thiagarajan
Move implementation of setup_port func() to serial8250_pci_setup_port. Co-developed-by: Tharun Kumar P <tharunkumar.pasumarthi@microchip.com> Signed-off-by: Tharun Kumar P <tharunkumar.pasumarthi@microchip.com> Signed-off-by: Kumaravel Thiagarajan <kumaravel.thiagarajan@microchip.com> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20230207164814.3104605-2-kumaravel.thiagarajan@microchip.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-19tty: serial: 8250: add DFL bus driver for Altera 16550.Matthew Gerlach
Add a Device Feature List (DFL) bus driver for the Altera 16550 implementation of UART. Signed-off-by: Matthew Gerlach <matthew.gerlach@linux.intel.com> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Marco Pagani <marpagan@redhat.com> Link: https://lore.kernel.org/r/20230115151447.1353428-5-matthew.gerlach@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-10-21parisc/serial: Rename 8250_gsc.c to 8250_parisc.cHelge Deller
The file name of this driver is misleading - it handles various serial ports on parisc machines, not just such on the GSC bus. Rename the file to make this clearer. Suggested-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Helge Deller <deller@gmx.de>
2022-10-21parisc: Make 8250_gsc driver dependend on CONFIG_PARISCHelge Deller
Although the name of the driver 8250_gsc.c suggests that it handles only serial ports on the GSC bus, it does handle serial ports listed in the parisc machine inventory as well, e.g. the serial ports in a C8000 PCI-only workstation. Change the dependency to CONFIG_PARISC, so that the driver gets included in the kernel even if CONFIG_GSC isn't set. Reported-by: Mikulas Patocka <mpatocka@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: Helge Deller <deller@gmx.de>
2022-07-14serial: 8250: SERIAL_8250_ASPEED_VUART should depend on ARCH_ASPEEDGeert Uytterhoeven
The Aspeed Virtual UART is only present on Aspeed BMC platforms. Hence add a dependency on ARCH_ASPEED, to prevent asking the user about this driver when configuring a kernel without Aspeed BMC support. Reviewed-by: Jeremy Kerr <jk@ozlabs.org> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/259138c372d433005b4871789ef9ee8d15320307.1657528861.git.geert+renesas@glider.be Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-15serial: 8250: Make SERIAL_8250_EM available for arm64 systemsPhil Edworthy
This is needed for the Renesas RZ/V2M (r9a09g011) SoC. Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20220330154024.112270-6-phil.edworthy@renesas.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-25serial: 8250: Correct Kconfig help text for blacklisted PCI devicesMaciej W. Rozycki
Correct the Kconfig help text for SERIAL_8250_LPSS, SERIAL_8250_MID and SERIAL_8250_PERICOM configuration options for dedicated PCI UART drivers that have been blacklisted in the generic PCI 8250 UART driver and as from commit a13e19cf3dc10 ("serial: 8250_lpss: split LPSS driver to separate module"), commit d9eda9bab2372 ("serial: 8250_pci: Intel MID UART support to its own driver"), and commit fcfd3c09f4078 ("serial: 8250_pci: Split out Pericom driver") respectively are not handled by said driver anymore (rather than for extra features only, as the current text indicates), and therefore require the respective dedicated drivers to work at all. Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk> Link: https://lore.kernel.org/r/alpine.DEB.2.21.2202121704560.34636@angie.orcam.me.uk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-20serial: 8250_pci: Split out Pericom driverAndy Shevchenko
Pericom along with Acces I/O support consumes a lot of LOCs in 8250_pci.c. For the sake of easier maintenance, split it to a separate driver. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20211122133512.8947-2-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-10-18Merge 5.15-rc6 into tty-nextGreg Kroah-Hartman
We need the serial/tty fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-10-05serial: 8250: allow disabling of Freescale 16550 compile testJohan Hovold
The SERIAL_8250_FSL option is used to enable a workaround for a break-detection erratum for Freescale 16550 UARTs in the 8250 driver and is currently also used to enable support for ACPI enumeration. It is enabled on PPC, ARM and ARM64 whenever 8250 console support is enabled (since the quirk is needed for sysrq handling). Commit b1442c55ce89 ("serial: 8250: extend compile-test coverage") enabled compile testing of the code in question but did not provide a means to disable the option when COMPILE_TEST is enabled. Add a conditional input prompt instead so that SERIAL_8250_FSL is no longer enabled by default when compile testing while continuing to always enable the quirk for platforms that may need it. Fixes: b1442c55ce89 ("serial: 8250: extend compile-test coverage") Reported-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Johan Hovold <johan@kernel.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20210924141232.4419-1-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-22serial: 8250: SERIAL_8250_EM should depend on ARCH_RENESASGeert Uytterhoeven
The Emma Mobile integrated serial port hardware is only present on Emma Mobile SoCs. Hence add a dependency on ARCH_RENESAS, to prevent asking the user about this driver when configuring a kernel without Renesas ARM32 SoC support. Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/7b5a4bbf2f47b2c4c127817e8b1524a650795d97.1631710085.git.geert+renesas@glider.be Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-21serial: 8250: extend compile-test coverageJohan Hovold
Allow more drivers to be compile tested more easily, for example, when doing subsystem-wide changes. Verified on X86_64 as well as arm, powerpc and m68k with minimal configs in order to catch missing implicit build dependencies. Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20210715083011.18887-1-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-22serial: extend compile-test coverageJohan Hovold
Allow more drivers to be compile tested more easily, for example, when doing subsystem-wide changes. Verified on X86_64 as well as arm, powerpc and m68k with minimal configs in order to catch missing implicit build dependencies (e.g. MAILBOX for SERIAL_TEGRA_TCU). Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20210422080211.29326-1-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-26serial: 8250: Add new 8250-core based Broadcom STB driverAl Cooper
Add a UART driver for the new Broadcom 8250 based STB UART. The new UART is backward compatible with the standard 8250, but has some additional features. The new features include a high accuracy baud rate clock system and DMA support. The driver will use the new optional BAUD MUX clock to select the best one of the four master clocks (81MHz, 108MHz, 64MHz and 48MHz) to feed the baud rate selection logic for any requested baud rate. This allows for more accurate BAUD rates when high speed baud rates are selected. The driver will use the new UART DMA hardware if the UART DMA registers are specified in Device Tree "reg" property. The driver also sets the UPSTAT_AUTOCTS flag when hardware flow control is enabled. This flag is needed for UARTs that don't assert a CTS changed interrupt when CTS changes and AFE (Hardware Flow Control) is enabled. The driver also contains a workaround for a bug in the Synopsis 8250 core. The problem is that at high baud rates, the RX partial FIFO timeout interrupt can occur but there is no RX data (DR not set in the LSR register). In this case the driver will not read the Receive Buffer Register, which clears the interrupt, and the system will get continuous UART interrupts until the next RX character arrives. The fix originally suggested by Synopsis was to read the Receive Buffer Register and discard the character when the DR bit in the LSR was not set, to clear the interrupt. The problem was that occasionally a character would arrive just after the DR bit check and a valid character would be discarded. The fix that was added will clear receive interrupts to stop the interrupt, deassert RTS to insure that no new data can arrive, wait for 1.5 character times for the sender to react to RTS and then check for data and either do a dummy read or a valid read. Debugfs error counters were also added and were used to help create test software that would cause the error condition. The counters can be found at: /sys/kernel/debug/bcm7271-uart/<device-name>/stats This also includes a few fixes for build warnings reported by the kernel test robot. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Al Cooper <alcooperx@gmail.com> Link: https://lore.kernel.org/r/20210325185256.16156-3-alcooperx@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-10tty: cyclades, remove this orphanJiri Slaby
The Cyclades driver was orphaned by commit d459883e6c54 (MAINTAINERS: remove two dead e-mail) 13 years ago. Noone stepped up to take care of them and to fix all the issues the driver has. On the top of that, there is no way to obtain the firmware for Z cards from the vendor as cyclades.com ceased to exist. So it's time to drop the driver with all its traces. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20210302062214.29627-5-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-21tty: serial: Replace HTTP links with HTTPS onesAlexander A. Klimov
Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de> Link: https://lore.kernel.org/r/20200718123840.19957-1-grandmaster@al2klimov.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-14treewide: replace '---help---' in Kconfig files with 'help'Masahiro Yamada
Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over '---help---'"), the number of '---help---' has been gradually decreasing, but there are still more than 2400 instances. This commit finishes the conversion. While I touched the lines, I also fixed the indentation. There are a variety of indentation styles found. a) 4 spaces + '---help---' b) 7 spaces + '---help---' c) 8 spaces + '---help---' d) 1 space + 1 tab + '---help---' e) 1 tab + '---help---' (correct indentation) f) 1 tab + 1 space + '---help---' g) 1 tab + 2 spaces + '---help---' In order to convert all of them to 1 tab + 'help', I ran the following commend: $ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/' Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-05-27serial: 8250: Enable 16550A variants by default on non-x86Josh Triplett
Some embedded devices still use these serial ports; make sure they're still enabled by default on architectures more likely to have them, to avoid rendering someone's console unavailable. Reported-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reported-by: Maxim Kochetkov <fido_max@inbox.ru> Fixes: dc56ecb81a0a ("serial: 8250: Support disabling mdelay-filled probes of 16550A variants") Cc: stable <stable@vger.kernel.org> Signed-off-by: Josh Triplett <josh@joshtriplett.org> Link: https://lore.kernel.org/r/a20b5fb7dd295cfb48160eecf4bdebd76332d67d.1590509426.git.josh@joshtriplett.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-02-10serial: 8250_tegra: Create Tegra specific 8250 driverJeff Brasen
To support booting NVIDIA Tegra platforms with either Device-Tree or ACPI, create a Tegra specific 8250 serial driver that supports both firmware types. Another benefit from doing this, is that the Tegra specific codec in the generic Open Firmware 8250 driver can now be removed. Signed-off-by: Jeff Brasen <jbrasen@nvidia.com> Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Link: https://lore.kernel.org/r/20200129132817.26343-1-jonathanh@nvidia.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-31Merge tag 'mips_5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linuxLinus Torvalds
Pull MIPS changes from Paul Burton: "Nothing too big or scary in here: - Support mremap() for the VDSO, primarily to allow CRIU to restore the VDSO to its checkpointed location. - Restore the MIPS32 cBPF JIT, after having reverted the enablement of the eBPF JIT for MIPS32 systems in the 5.5 cycle. - Improve cop0 counter synchronization behaviour whilst onlining CPUs by running with interrupts disabled. - Better match FPU behaviour when emulating multiply-accumulate instructions on pre-r6 systems that implement IEEE754-2008 style MACs. - Loongson64 kernels now build using the MIPS64r2 ISA, allowing them to take advantage of instructions introduced by r2. - Support for the Ingenic X1000 SoC & the really nice little CU Neo development board that's using it. - Support for WMAC on GARDENA Smart Gateway devices. - Lots of cleanup & refactoring of SGI IP27 (Origin 2*) support in preparation for introducing IP35 (Origin 3*) support. - Various Kconfig & Makefile cleanups" * tag 'mips_5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (60 commits) MIPS: PCI: Add detection of IOC3 on IO7, IO8, IO9 and Fuel MIPS: Loongson64: Disable exec hazard MIPS: Loongson64: Bump ISA level to MIPSR2 MIPS: Make DIEI support as a config option MIPS: OCTEON: octeon-irq: fix spelling mistake "to" -> "too" MIPS: asm: local: add barriers for Loongson MIPS: Loongson64: Select mac2008 only feature MIPS: Add MAC2008 Support Revert "MIPS: Add custom serial.h with BASE_BAUD override for generic kernel" MIPS: sort MIPS and MIPS_GENERIC Kconfig selects alphabetically (again) MIPS: make CPU_HAS_LOAD_STORE_LR opt-out MIPS: generic: don't unconditionally select PINCTRL MIPS: don't explicitly select LIBFDT in Kconfig MIPS: sync-r4k: do slave counter synchronization with disabled HW interrupts MIPS: SGI-IP30: Check for valid pointer before using it MIPS: syscalls: fix indentation of the 'SYSNR' message MIPS: boot: fix typo in 'vmlinux.lzma.its' target MIPS: fix indentation of the 'RELOCS' message dt-bindings: Document loongson vendor-prefix MIPS: CU1000-Neo: Refresh defconfig to support HWMON and WiFi. ...
2020-01-14serial: 8250: Support disabling mdelay-filled probes of 16550A variantsJosh Triplett
The 8250 driver can probe for many variants of the venerable 16550A serial port. Some of those probes involve long (20ms) mdelay calls, which delay system boot. Modern systems and virtual machines don't have those variants. Provide a Kconfig option to disable probes for 16550A variants. Disabling this speeds up the boot of a virtual machine with a serial console by more than 20ms (a substantial fraction of the ~100ms needed to boot a carefully configured VM). Before: [ +0.021919] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A After: [ +0.000097] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A Signed-off-by: Josh Triplett <josh@joshtriplett.org> Link: https://lore.kernel.org/r/20200111022513.GA166267@localhost Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-09mfd: ioc3: Add driver for SGI IOC3 chipThomas Bogendoerfer
SGI IOC3 chip has integrated ethernet, keyboard and mouse interface. It also supports connecting a SuperIO chip for serial and parallel interfaces. IOC3 is used inside various SGI systemboards and add-on cards with different equipped external interfaces. Support for ethernet and serial interfaces were implemented inside the network driver. This patchset moves out the not network related parts to a new MFD driver, which takes care of card detection, setup of platform devices and interrupt distribution for the subdevices. Serial portion: Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-for-MFD-by: Lee Jones <lee.jones@linaro.org> Network part: Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Network part: Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de> Signed-off-by: Paul Burton <paulburton@kernel.org> Cc: James Hogan <jhogan@kernel.org> Cc: David S. Miller <davem@davemloft.net> Cc: Jiri Slaby <jslaby@suse.com> Cc: linux-mips@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: netdev@vger.kernel.org Cc: linux-serial@vger.kernel.org
2019-11-20tty: Fix Kconfig indentationKrzysztof Kozlowski
Adjust indentation from spaces to tab (+optional two spaces) as in coding style with command like: $ sed -e 's/^ /\t/' -i */Kconfig Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20191120133843.13189-1-krzk@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-04drivers/tty/serial/8250: Make Aspeed VUART SIRQ polarity configurableOskar Senft
Make the SIRQ polarity for Aspeed AST24xx/25xx VUART configurable via sysfs. This setting need to be changed on specific host platforms depending on the selected host interface (LPC / eSPI). The setting is configurable via sysfs rather than device-tree to stay in line with other related configurable settings. On AST2500 the VUART SIRQ polarity can be auto-configured by reading a bit from a configuration register, e.g. the LPC/eSPI interface configuration bit. Tested: Verified on TYAN S7106 mainboard. Signed-off-by: Oskar Senft <osk@google.com> Link: https://lore.kernel.org/r/20190905144130.220713-1-osk@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-09-04serial: 8250_pci: Merge 8250_moxa to 8250_pciKai-Heng Feng
Moxa serial boards only need a special setup function, we can use generic 8250 framework for other parts. So let's merge 8250_moxa to 8250_pci. Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Link: https://lore.kernel.org/r/20190816165124.16942-1-kai.heng.feng@canonical.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-09-04serial: 8250_lpss: switch to use 8250_dwlib libraryAndy Shevchenko
Since we have a common library module for Synopsys DesignWare UART, let us use it. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20190806094322.64987-5-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-09-04serial: 8250_dw: switch to use 8250_dwlib libraryAndy Shevchenko
Since we have a common library module for Synopsys DesignWare UART, let us use it. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20190806094322.64987-4-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-09-04serial: 8250_dw: split Synopsys DesignWare 8250 common functionsAndy Shevchenko
We would like to use same functions in the couple of drivers for Synopsys DesignWare 8250 UART. Split them from 8250_dw into new brand library module which users will select explicitly. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20190806094322.64987-3-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-21tty/serial/8250: use mctrl_gpio helpersYegor Yefremov
This patch permits the usage for GPIOs to control the CTS/RTS/DTR/DSR/DCD/RI signals. Changed by Stefan: Only call mctrl_gpio_init(), if the device has no ACPI companion device to not break existing ACPI based systems. Also only use the mctrl_gpio_ functions when "gpios" is available. Use MSR / MCR <-> TIOCM wrapper functions. Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com> Signed-off-by: Stefan Roese <sr@denx.de> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Tested-by: Yegor Yefremov <yegorslists@googlemail.com> Cc: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Giulio Benetti <giulio.benetti@micronovasrl.com> Cc: Yegor Yefremov <yegorslists@googlemail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-04tty: add SPDX identifiers to Kconfig and MakefilesGreg Kroah-Hartman
There were a few Kconfig and Makefiles under drivers/tty/ that were missing a SPDX identifier. Fix that up so that automated tools can properly classify all kernel source files. Cc: Jiri Slaby <jslaby@suse.com> Cc: Jiri Kosina <jikos@kernel.org> Cc: Rob Herring <robh@kernel.org> Acked-by: David Sterba <dsterba@suse.com> Reviewed-by: Mukesh Ojha <mojha@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-18serial: 8250_omap: Make 8250_omap driver driver depend on ARCH_K3Lokesh Vutla
Allow 8250 omap serial driver to be used for K3 platforms. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Vignesh R <vigneshr@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.0.4) at 2026-01-07 16:43:07 +0000