| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"The technical details below. For me the CIX Semi and Axis
Communications ARTPEC-9 SoCs were the most interesting new drivers in
this merge window.
Core changes:
- Handle per-direction skew control in the generic pin config
- Drop the pointless subsystem boilerplate banner message during
boot. Less noise in the console. It's available as debug message if
someone really want it
New drivers:
- Samsung Exynos 8890 SoC support
- Samsung Exynos derived Axis Communications ARTPEC-9 SoC support.
These guys literally live next door to me, ARTPEC spells out "Axis
Real-Time Picture Encoding Chip" and is tailored for camera image
streams and is something they have evolved for a quarter of a
century
- Mediatek MT6878 SoC support
- Qualcomm Glymur PMIC support (mostly just compatible strings)
- Qualcomm Kaanapali SoC TLMM support
- Microchip pic64gx "gpio2" SoC support
- Microchip Polarfire "iomux0" SoC support
- CIX Semiconductors SKY1 SoC support
- Rockchip RK3506 SoC support
- Airhoa AN7583 chip support
Improvements:
- Improvements for ST Microelectronics STM32 handling of skew
settings so input and output can have different skew settings
- A whole bunch of device tree binding cleanups: Marvell Armada and
Berlin, Actions Semiconductor S700 and S900, Broadcom Northstar 2
(NS2), Bitmain BM1880 and Spreadtrum SC9860 are moved over to
schema"
* tag 'pinctrl-v6.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (107 commits)
pinctrl: add CONFIG_OF dependencies for microchip drivers
pinctrl: starfive: use dynamic GPIO base allocation
pinctrl: single: Fix incorrect type for error return variable
MAINTAINERS: Change Linus Walleij mail address
pinctrl: cix: Fix obscure dependency
dt-bindings: pinctrl: cix,sky1-pinctrl: Drop duplicate newline
dt-bindings: pinctrl: aspeed,ast2600-pinctrl: Add PCIe RC PERST# group
pinctrl: airoha: Fix AIROHA_PINCTRL_CONFS_DRIVE_E2 in an7583_pinctrl_match_data
pinctrl: airoha: fix pinctrl function mismatch issue
pinctrl: cherryview: Convert to use intel_gpio_add_pin_ranges()
pinctrl: intel: Export intel_gpio_add_pin_ranges()
pinctrl: renesas: rzg2l: Refactor OEN register PWPR handling
pinctrl: airoha: convert comma to semicolon
pinctrl: elkhartlake: Switch to INTEL_GPP() macro
pinctrl: cherryview: Switch to INTEL_GPP() macro
pinctrl: emmitsburg: Switch to INTEL_GPP() macro
pinctrl: denverton: Switch to INTEL_GPP() macro
pinctrl: cedarfork: Switch to INTEL_GPP() macro
pinctrl: airoha: add support for Airoha AN7583 PINs
dt-bindings: pinctrl: airoha: Document AN7583 Pin Controller
...
|
|
Apple Silicon Macs (M1, etc.) have an RTC that is part of the PMU IC,
but most of the PMU functionality is abstracted out by the SMC.
On T600x machines, the RTC counter must be accessed via the SMC to
get full functionality, and it seems likely that future machines
will move towards making SMC handle all RTC functionality.
The SMC RTC counter access is implemented on all current machines
as of the time of this writing, on firmware 12.x. However, the RTC
offset (needed to set the time) is still only accessible via direct
PMU access. To handle this, we expose the RTC offset as an NVMEM
cell from the SPMI PMU device node, and this driver consumes that
cell and uses it to compute/set the current time.
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Hector Martin <marcan@marcan.st>
Signed-off-by: Sven Peter <sven@kernel.org>
Signed-off-by: James Calligeros <jcalligeros99@gmail.com>
Link: https://patch.msgid.link/20251112-macsmc-subdevs-v5-3-728e4b91fe81@gmail.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine updates from Vinod Koul:
- Renesas driver conversion to RUNTIME_PM_OPS() etc
- Dropping module alias on bunch of drivers
- GPI Block event interrupt support in Qualcomm driver and updates to
I2C driver as well
* tag 'dmaengine-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (23 commits)
dt-bindings: dma: xilinx: Simplify dma-coherent property
dmaengine: fsl-edma: configure tcd attr with separate src and dst settings
dmaengine: st_fdma: drop unused module alias
dmaengine: bcm2835: enable compile testing
dmaengine: tegra210-adma: drop unused module alias
dmaengine: sprd: drop unused module alias
dmaengine: mmp_tdma: drop unnecessary OF node check in remove
dmaengine: mmp_tdma: drop unused module alias
dmaengine: k3dma: drop unused module alias
dmaengine: fsl-qdma: drop unused module alias
dmaengine: fsl-edma: drop unused module alias
dmaengine: dw: drop unused module alias
dmaengine: bcm2835: drop unused module alias
dmaengine: at_hdmac: add COMPILE_TEST support
dmaengine: at_hdmac: fix formats under 64-bit
i2c: i2c-qcom-geni: Add Block event interrupt support
dmaengine: qcom: gpi: Add GPI Block event interrupt support
dmaengine: idxd: drain ATS translations when disabling WQ
dmaengine: sh: Kconfig: Drop ARCH_R7S72100/ARCH_RZG2L dependency
dmaengine: rcar-dmac: Convert to NOIRQ_SYSTEM_SLEEP/RUNTIME_PM_OPS()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy
Pull phy updates from Vinod Koul:
"Core:
- Drop Kishon as maintainer, thanks to him for helping, move to
credits and add Neil to help with reviews.
- Add new phy_notify_stat to notify phy from controllers during the
runtime transitions and usage in samsung phy
New hardware support:
- Renesas RZ/G3E USB3.0 driver
- NXP Support TJA1048/TJA1051 CAN phy
- Rockchip support for rk3506 dsi dphy
- Qualcomm Glymur QMP PCIe PHY support
Updates:
- PM support for rcar-gen3-usb2 driver
- Samsung HDMI/eDP Transmitter Combo PHY updates
- Freescale imx8mq support for alternate reference clock"
* tag 'phy-for-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (40 commits)
MAINTAINERS: phy: Add Neil Armstrong as reviewers for phy subsystem
MAINTAINERS: phy: Move Kishon Vijay Abraham I to credits
phy: fsl-imx8mq-usb: support alternate reference clock
dt-bindings: phy: imx8mq-usb: add alternate reference clock
phy: rockchip: samsung-hdptx: Prevent Inter-Pair Skew from exceeding the limits
phy: rockchip: samsung-hdptx: Reduce ROPLL loop bandwidth
phy: rockchip: samsung-hdptx: Fix reported clock rate in high bpc mode
phy: ti: gmii-sel: Add a sanity check on the phy_id
phy: qcom: qmp-pcie: Add support for Glymur PCIe Gen5x4 PHY
phy: qcom-qmp: pcs: Add v8.50 register offsets
dt-bindings: phy: qcom,sc8280xp-qmp-pcie-phy: Document the Glymur QMP PCIe PHY
dt-bindings: phy: qcom,sc8280xp-qmp-pcie-phy: Restrict resets per each device
phy: freescale: Initialize priv->lock
phy: renesas: Remove unneeded semicolons
phy: qcom: m31-eusb2: Update init sequence to set PHY_ENABLE
phy: qcom: qmp-combo: get the USB3 & DisplayPort lanes mapping from DT
dt-bindings: phy: qcom,sc8280xp-qmp-usb43dp-phy: Document lanes mapping when not using in USB-C complex
phy: rockchip: naneng-combphy: Fix PCIe L1ss support RK3562
phy: rockchip: naneng-combphy: Fix PCIe L1ss support RK3528
phy: renesas: rcar-gen3-usb2: Add suspend/resume support
...
|
|
Add i2c id_table for isl12026 rtc.
Signed-off-by: Akhilesh Patil <akhilesh@ee.iitb.ac.in>
Link: https://patch.msgid.link/2025119-54859-2010914@bhairav-test.ee.iitb.ac.in
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
Switch from devm_reset_control_get_shared() to
devm_reset_control_array_get_shared() when retrieving resets.
The RZ/V2H SoC requires two resets for the RTC block instead of one,
so this will allow to handle multiple resets without additional changes.
Signed-off-by: Ovidiu Panait <ovidiu.panait.rb@renesas.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Link: https://patch.msgid.link/20251107210706.45044-3-ovidiu.panait.rb@renesas.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
Replace deprecated SIMPLE_DEV_PM_OPS with DEFINE_SIMPLE_DEV_PM_OPS macro
and use pm_sleep_ptr() to initialize pm_ops. This also allows us to drop
the checks for CONFIG_PM_SLEEP.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Kartik Rajput <kkartik@nvidia.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://patch.msgid.link/20251024064952.775883-3-kkartik@nvidia.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
Add ACPI support for Tegra RTC, which is available on Tegra241 and
Tegra410. Both Tegra241 and Tegra410 use the same ACPI ID 'NVDA0280'.
When ACPI boot is used, the RTC clock is configured by UEFI before
the kernel boots. On device-tree boot, the probe must fail if clocks are
not provided in the device-tree.
Signed-off-by: Kartik Rajput <kkartik@nvidia.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://patch.msgid.link/20251024064952.775883-2-kkartik@nvidia.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
Simplify clock management by replacing devm_clk_get() and manual clock
enable/disable with devm_clk_get_enabled(). This also simplifies the
error handling logic. Also remove tegra_rtc_remove() as the clock will
automatically be disabled when the device is unbound from the bus.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Kartik Rajput <kkartik@nvidia.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://patch.msgid.link/20251024064952.775883-1-kkartik@nvidia.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
MC34708 is one of the three mfd devices supported by DRV_MC13XXX.
Update Kconfig accordingly.
Signed-off-by: Alexander Kurz <akurz@blala.de>
Link: https://patch.msgid.link/20251011062605.13591-1-akurz@blala.de
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
The register buffer in s35390a_get_reg() was previously defined as
`char *buf`. This is not ideal since register data represents raw
binary values rather than textual data.
Switch the type to `u8 *buf` to better reflect its intended usage and
to avoid potential issues with sign extension when handling register
values on platforms where `char` is signed by default.
This change improves type safety and makes the code consistent with
other RTC drivers that operate on raw register data.
Signed-off-by: Nick Huang <sef1548@gmail.com>
Link: https://patch.msgid.link/20250920174224.108795-1-sef1548@gmail.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull hyperv updates from Wei Liu:
- Enhancements to Linux as the root partition for Microsoft Hypervisor:
- Support a new mode called L1VH, which allows Linux to drive the
hypervisor running the Azure Host directly
- Support for MSHV crash dump collection
- Allow Linux's memory management subsystem to better manage guest
memory regions
- Fix issues that prevented a clean shutdown of the whole system on
bare metal and nested configurations
- ARM64 support for the MSHV driver
- Various other bug fixes and cleanups
- Add support for Confidential VMBus for Linux guest on Hyper-V
- Secure AVIC support for Linux guests on Hyper-V
- Add the mshv_vtl driver to allow Linux to run as the secure kernel in
a higher virtual trust level for Hyper-V
* tag 'hyperv-next-signed-20251207' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: (58 commits)
mshv: Cleanly shutdown root partition with MSHV
mshv: Use reboot notifier to configure sleep state
mshv: Add definitions for MSHV sleep state configuration
mshv: Add support for movable memory regions
mshv: Add refcount and locking to mem regions
mshv: Fix huge page handling in memory region traversal
mshv: Move region management to mshv_regions.c
mshv: Centralize guest memory region destruction
mshv: Refactor and rename memory region handling functions
mshv: adjust interrupt control structure for ARM64
Drivers: hv: use kmalloc_array() instead of kmalloc()
mshv: Add ioctl for self targeted passthrough hvcalls
Drivers: hv: Introduce mshv_vtl driver
Drivers: hv: Export some symbols for mshv_vtl
static_call: allow using STATIC_CALL_TRAMP_STR() from assembly
mshv: Extend create partition ioctl to support cpu features
mshv: Allow mappings that overlap in uaddr
mshv: Fix create memory region overlap check
mshv: add WQ_PERCPU to alloc_workqueue users
Drivers: hv: Use kmalloc_array() instead of kmalloc()
...
|
|
Handling most of the ublksrv_ctrl_cmd opcodes require locking a mutex,
so ublk_ctrl_uring_cmd() bails out with EAGAIN when called with the
IO_URING_F_NONBLOCK issue flag. However, several opcodes can be handled
without blocking:
- UBLK_CMD_GET_QUEUE_AFFINITY
- UBLK_CMD_GET_DEV_INFO
- UBLK_CMD_GET_DEV_INFO2
- UBLK_U_CMD_GET_FEATURES
Handle these opcodes synchronously instead of returning EAGAIN so
io_uring doesn't need to issue the command via the worker thread pool.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
GFX1151 has 1.5x the number of available physical VGPRs per SIMD.
Bump total memory availability for acquire checks on queue creation.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit b42f3bf9536c9b710fd1d4deb7d1b0dc819dc72d)
Cc: stable@vger.kernel.org
|
|
On a 32-bit ARM system, the audio_decoder struct ends up being too large
for dp_retrain_link_dp_test.
link_dp_cts.c:157:1: error: the frame size of 1328 bytes is larger than
1280 bytes [-Werror=frame-larger-than=]
This is mitigated by shrinking the members of the struct and avoids
having to deal with dynamic allocation.
feed_back_divider is assigned but otherwise unused. Remove both.
pixel_repetition looks like it should be a bool since it's only ever
assigned to 1. But there are checks for 2 and 4. Reduce to uint8_t.
Remove ss_percentage_divider. Unused.
Shrink refresh_rate as it gets assigned to at most a 3 digit integer
value.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 3849efdc7888d537f09c3dcfaea4b3cd377a102e)
|
|
This is important for userspace to avoid hardcoding VGPR size.
Reviewed-by: Kent Russell <kent.russell@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 71776e0965f9f730af19c5f548827f2a7c91f5a8)
Cc: stable@vger.kernel.org
|
|
[WHAT]
When compiling Linux kernel with clang, the following warning / error
messages pops up:
drivers/gpu/drm/amd/amdgpu/../dal-dev/dc/dml2_0/display_mode_core.c:6853:12:
error: stack frame size (2120) exceeds limit (2056) in
'dml_core_mode_support' [-Werror,-Wframe-larger-than]
6853 | dml_bool_t dml_core_mode_support(struct display_mode_lib_st
*mode_lib)
[HOW]
Refactoring CalculateVMRowAndSwath_params assignments to a new function
helps reduce the stack frame size in dml_core_mode_support.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4733
Reviewed-by: Austin Zheng <austin.zheng@amd.com>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Chenyu Chen <chen-yu.chen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 29a4dc4b5d82e6b3da343391f9e784cf5c48732c)
|
|
SI hardware doesn't support pasids, user mode queues, or
KIQ/MES so there is no need for this. Doing so results in
a segfault as these callbacks are non-existent for SI.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4744
Fixes: f3854e04b708 ("drm/amdgpu: attach tlb fence to the PTs update")
Reviewed-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 820b3d376e8a102c6aeab737ec6edebbbb710e04)
|
|
This can get called from an atomic context.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4470
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 8acdad9344cc7b4e7bc01f0dfea80093eb3768db)
Cc: stable@vger.kernel.org
|
|
The trap may be entered with dependency checking disabled.
Wait for dependency counters and save/restore scheduling mode.
v2:
Use ttmp1 instead of ttmp11. ttmp11 is not zero-initialized.
While the trap handler does zero this field before use, a user-mode
second-level trap handler could not rely on this being zero when
using an older kernel mode driver.
v3:
Use ttmp11 primarily but copy to ttmp1 before jumping to the
second level trap handler. ttmp1 is inspectable by a debugger.
Unexpected bits in the unused space may regress existing software.
Signed-off-by: Jay Cornwall <jay.cornwall@amd.com>
Reviewed-by: Lancelot Six <lancelot.six@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 423888879412e94725ca2bdccd89414887d98e31)
Cc: stable@vger.kernel.org
|
|
When split svm ranges that have been mapped using huge page should use huge
page size(2MB) to check split range alignment, not prange->granularity that
means migration granularity.
Fixes: 7ef6b2d4b7e5 ("drm/amdkfd: remap unaligned svm ranges that have split")
Signed-off-by: Xiaogang Chen <xiaogang.chen@amd.com>
Reviewed-by: Philip Yang <Philip.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 448ee45353ef9fb1a34f5f26eb3f48923c6f0898)
|
|
It is possible for a BO to exist that is not currently associated with a
resource, e.g. because it has been evicted.
When devcoredump tries to read the contents of all BOs for dumping, we need
to expect this as well -- in this case, ENODATA is recorded instead of the
buffer contents.
Fixes: 7d08df5d0bd3 ("drm/ttm: Add ttm_bo_access")
Fixes: 09ac4fcb3f25 ("drm/ttm: Implement vm_operations_struct.access v2")
Cc: stable <stable@kernel.org>
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/6271
Signed-off-by: Simon Richter <Simon.Richter@hogyros.de>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Shuicheng Lin <shuicheng.lin@intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20251013161241.709916-1-Simon.Richter@hogyros.de
|
|
Add a config for the v1.2.5 CCI found on msm8953 which has different
values in .params compared to others already supported in the driver.
Reviewed-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Luca Weiss <luca@lucaweiss.eu>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-mergewindow
i2c-host for v6.19
- general cleanups in bcm2835, designware, pcf8584, and stm32
- amd-mp2: fix device refcount
- designware: avoid interrupt storms caused by bad firmware
- i801: fix supported features
- spacemit: fix device detection failures
New device support:
- Intel Diamond Rapids
- Rockchip RK3506
- Qualcomm Kaanapali, MSM8953
|
|
Calculate required PDI buffer and pass the section number to the cdns
BPT helpers.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Tested-by: Shuming Fan <shumingf@realtek.com>
Link: https://patch.msgid.link/20251021094355.132943-4-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
We can get start_register, data_size, and buffer data from the new
sdw_bpt_section parameter. Also, handle all register sections in the
cdns BRA helpers. No function changes as section number is 1.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Tested-by: Shuming Fan <shumingf@realtek.com>
Link: https://patch.msgid.link/20251021094355.132943-3-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Currently we send a BRA message with a start address with continuous
registers in a BPT stream. However, a codec may need to write different
register sections shortly. Introduce a register section in struct
sdw_btp_msg which contain register start address, length, and buffer.
This commit uses only 1 section for each BPT message. And we need to add
up all BPT section length and check if it reach maximum BPT bytes.
No function changes.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Tested-by: Shuming Fan <shumingf@realtek.com>
Link: https://patch.msgid.link/20251021094355.132943-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Intel DMA buffer size need to be a multiple of data block size.
Find the minimal fake data size and extra buffer size to meet the
requirement.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://patch.msgid.link/20251030070253.1216871-8-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
sdw_cdns_prepare_read_dma_buffer
We may need to add few fake frames to fit the aligned read dma buffer
size. Add a fake_size parameter to allow the caller to set the fake data
size.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://patch.msgid.link/20251014031450.3781789-7-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Currently, we calculate the required bandwidth after the PDI buffer size
is calculated. However as we need to add some fake frame to align the
data block size, the final PDI size and the frame number will change.
Besides, we need the required bandwidth to decide the DMA channel number
and the channel number will be used to calculate the data block size.
Therefore, we calculate the required bandwidth and export a helper for
the caller to get the required bandwidth.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://patch.msgid.link/20251014031450.3781789-5-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
data_per_frame will be used for preparing the TX buffer and we may add
some fake frames to ensure the data in the buffer will be flushed.
So that it should indicate the frame capability even if the required
data bytes are less than the frame capability.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://patch.msgid.link/20251014031450.3781789-4-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
DP0 is only for BPT stream. We should not compute and update the port
params of the normal audio streams.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://patch.msgid.link/20251014031450.3781789-3-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The existing code uses i as the frame index which is 0 based. And
"bad frame %d/%d", i, num_frames where num_frames is 1 based. Change the
frame index to i + 1 to align with num_frames and more readable.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://patch.msgid.link/20251014031450.3781789-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Add support for controller version v3.1.0, which has changes in
register layout and some register fields compared to v2.0.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Tested-by: Alexey Klimov <alexey.klimov@linaro.org> # sm8550
Link: https://patch.msgid.link/20250912083225.228778-8-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
cleanup the register layout structs to prepare for adding new 3.x
controller support.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Tested-by: Alexey Klimov <alexey.klimov@linaro.org> # sm8550
Link: https://patch.msgid.link/20250912083225.228778-6-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Number of input and output ports can be dynamically read from the
controller registers, getting this value from Device Tree is redundant
and potentially lead to bugs.
Remove the code parsing this property along with marking this as
deprecated in device tree bindings.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Tested-by: Alexey Klimov <alexey.klimov@linaro.org> # sm8550
Link: https://patch.msgid.link/20250912083225.228778-5-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
remove read fifo depth field parsing logic, as rd_fifo_depth is never
used in the driver. Cleaning this up would benefit when adding new
variant support which includes adding variant fields for rd_fifo_depth.
ex: Glymur has this rd_fifo_depth register fields changed from v2.x
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Tested-by: Alexey Klimov <alexey.klimov@linaro.org> # sm8550
Link: https://patch.msgid.link/20250912083225.228778-3-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Add support for of_property_read_u8_index(), simillar to others
u16 and u32 variants. Having this helper makes the code more tidy in
isome cases, specially when we are parsing multiple of these into
data structures.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Tested-by: Alexey Klimov <alexey.klimov@linaro.org> # sm8550
Link: https://patch.msgid.link/20250912083225.228778-2-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Dell Precision 7780 often wakes up on its own from suspend. Sometimes
wake up happens immediately (i. e. within 7 seconds), sometimes it happens
after, say, 30 minutes.
Fixes: 1796f808e4bb ("HID: i2c-hid: acpi: Stop setting wakeup_capable")
Link: https://lore.kernel.org/linux-i2c/197ae95ffd8.dc819e60457077.7692120488609091556@zohomail.com/
Cc: stable@vger.kernel.org
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Askar Safin <safinaskar@gmail.com>
Link: https://lore.kernel.org/r/20251206180414.3183334-2-safinaskar@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
|
|
Switch to use the new .i3c_xfers() callback, which supports all I3C
transfer modes (SDR and HDR). Also replace struct i3c_priv_xfer with the
new struct i3c_xfer, as i3c_priv_xfer is now an alias of i3c_xfer.
No functional changes.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Tested-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Link: https://patch.msgid.link/20251203-i3c_xfer_cleanup_master-v2-1-7dd94d04ee2d@nxp.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux
Pull i3c updates from Alexandre Belloni:
"HDR support has finally been added. mipi-i3c-hci has been reworked and
Intel Nova Lake-S support has been added.
Subsystem:
- Add HDR transfer support
Drivers:
- dw: fix bus hang on Agilex5
- mipi-i3c-hci: Intel Nova Lake-S support, IOMMU support
- svc: HDR support"
* tag 'i3c/for-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux: (28 commits)
regmap: i3c: switch to use i3c_xfer from i3c_priv_xfer
net: mctp i3c: switch to use i3c_xfer from i3c_priv_xfer
hwmon: (lm75): switch to use i3c_xfer from i3c_priv_xfer
i3c: document i3c_xfers
i3c: fix I3C_SDR bit number
i3c: master: svc: Add basic HDR mode support
i3c: master: svc: Replace bool rnw with union for HDR support
i3c: Switch to use new i3c_xfer from i3c_priv_xfer
i3c: Add HDR API support
i3c: master: add WQ_PERCPU to alloc_workqueue users
i3c: master: Remove i3c_device_free_ibi from i3c_device_remove
i3c: mipi-i3c-hci-pci: Set d3cold_delay to 0 for Intel controllers
i3c: mipi-i3c-hci-pci: Add LTR support for Intel controllers
i3c: mipi-i3c-hci-pci: Add exit callback
i3c: mipi-i3c-hci-pci: Change callback parameter
i3c: mipi-i3c-hci-pci: Allocate a structure for mipi_i3c_hci_pci device information
i3c: mipi-i3c-hci-pci: Factor out intel_reset()
i3c: mipi-i3c-hci-pci: Factor out private registers ioremapping
i3c: mipi-i3c-hci-pci: Constify driver data
i3c: mipi-i3c-hci-pci: Use readl_poll_timeout()
...
|
|
This commit addresses two issues causing i2c detect to fail.
The identified issues are:
1. Incorrect error handling for BED (Bus Error No ACK/NAK):
Before this commit, Both ALD (Arbitration Loss Detected) and
BED returned -EAGAIN.
2. Missing interrupt status clear after initialization in xfer():
On the K1 SoC, simply fixing the first issue changed the error
from -EAGAIN to -ETIMEOUT. Through tracing, it was determined that
this is likely due to MSD (Master Stop Detected) latency issues.
That means the MSD bit in the ISR may still be set on the next transfer.
As a result, the controller won't work — we can see from the scope that
it doesn't issue any signal.
(This only occurs during rapid consecutive I2C transfers.
That explains why the issue only shows up with i2cdetect.)
With these two fixes, i2c device detection now functions correctly on the K1 SoC.
Fixes: 5ea558473fa31 ("i2c: spacemit: add support for SpacemiT K1 SoC")
Tested-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Troy Mitchell <troy.mitchell@linux.spacemit.com>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Tested-by: Michael Opdenacker <michael.opdenacker@rootcommit.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20251113-fix-k1-detect-failure-v2-1-b02a9a74f65a@linux.spacemit.com
|
|
In i2c_amd_probe(), amd_mp2_find_device() utilizes
driver_find_next_device() which internally calls driver_find_device()
to locate the matching device. driver_find_device() increments the
reference count of the found device by calling get_device(), but
amd_mp2_find_device() fails to call put_device() to decrement the
reference count before returning. This results in a reference count
leak of the PCI device each time i2c_amd_probe() is executed, which
may prevent the device from being properly released and cause a memory
leak.
Found by code review.
Cc: stable@vger.kernel.org
Fixes: 529766e0a011 ("i2c: Add drivers for the AMD PCIe MP2 I2C controller")
Signed-off-by: Ma Ke <make24@iscas.ac.cn>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20251022095402.8846-1-make24@iscas.ac.cn
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"This is entirely SoC clk drivers.
The majority diff wise is for the new Rockchip and Qualcomm clk
drivers which is mostly lines and lines of data structures to describe
the clk hardware in these SoCs. Beyond those two, Renesas continues to
incrementally add clks to their SoC drivers, causing them to show up
higher in the diffstat this time because they added quite a few clks
all over the place.
Overall it is a semi-quiet release that has some new clk drivers and
the usual fixes for clock data that was wrong or missing and
non-critical cleanups that plug error paths or fix typos.
New Drivers:
- Qualcomm IPQ5424 Network Subsystem Clock Controller
- Qualcomm SM8750 Video Clock Controller
- Rockchip RV1126B and RK3506 clock drivers
- i.MX8ULP SIM LPAV clock driver
- Samsung ACPM (firmware interface) clock driver
- Altera Agilex5 clock driver"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (117 commits)
clk: keystone: fix compile testing
clk: keystone: syscon-clk: fix regmap leak on probe failure
clk: qcom: Mark camcc_sm7150_hws static
clk: samsung: exynos-clkout: Assign .num before accessing .hws
clk: rockchip: Add clock and reset driver for RK3506
dt-bindings: clock: rockchip: Add RK3506 clock and reset unit
clk: actions: Fix discarding const qualifier by 'container_of' macro
clk: spacemit: Set clk_hw_onecell_data::num before using flex array
clk: visconti: Add VIIF clocks
dt-bindings: clock: tmpv770x: Add VIIF clocks
dt-bindings: clock: tmpv770x: Remove definition of number of clocks
clk: visconti: Do not define number of clocks in bindings
clk: rockchip: Add clock controller for the RV1126B
dt-bindings: clock, reset: Add support for rv1126b
clk: rockchip: Implement rockchip_clk_register_armclk_multi_pll()
clk: qcom: x1e80100-dispcc: Add USB4 router link resets
dt-bindings: clock: qcom: x1e80100-dispcc: Add USB4 router link resets
clk: qcom: videocc-sm8750: Add video clock controller driver for SM8750
dt-bindings: clock: qcom: Add SM8750 video clock controller
clk: qcom: branch: Extend invert logic for branch2 mem clocks
...
|
|
The for_each_child_of_node() macro automatically manages device node
reference counts during normal iteration. However, when breaking out
of the loop early with return, the current iteration's node is not
automatically released, leading to a reference count leak.
Fix this by adding of_node_put(child) before returning from the loop
when emc2305_set_single_tz() fails.
This issue could lead to memory leaks over multiple probe cycles.
Signed-off-by: Pei Xiao <xiaopei01@kylinos.cn>
Link: https://lore.kernel.org/r/tencent_5CDC08544C901D5ECA270573D5AEE3117108@qq.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
./drivers/hwmon/emc2305.c:597:4-15: ERROR: probable double put
Device node iterators put the previous value of the index variable, so an
explicit put causes a double put.
Signed-off-by: Pei Xiao <xiaopei01@kylinos.cn>
Link: https://lore.kernel.org/r/tencent_CD373F952BE48697C949E39CB5EB77841D06@qq.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The documentation states that on machines supporting only global
fan mode control, the pwmX_enable attributes should only be created
for the first fan channel (pwm1_enable, aka channel 0).
Fix the off-by-one error caused by the fact that fan channels have
a zero-based index.
Cc: stable@vger.kernel.org
Fixes: 1c1658058c99 ("hwmon: (dell-smm) Add support for automatic fan mode")
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20251203202109.331528-1-W_Armin@gmx.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The macro FAN_FROM_REG evaluates its arguments multiple times. When used
in lockless contexts involving shared driver data, this leads to
Time-of-Check to Time-of-Use (TOCTOU) race conditions, potentially
causing divide-by-zero errors.
Convert the macro to a static function. This guarantees that arguments
are evaluated only once (pass-by-value), preventing the race
conditions.
Additionally, in store_fan_div, move the calculation of the minimum
limit inside the update lock. This ensures that the read-modify-write
sequence operates on consistent data.
Adhere to the principle of minimal changes by only converting macros
that evaluate arguments multiple times and are used in lockless
contexts.
Link: https://lore.kernel.org/all/CALbr=LYJ_ehtp53HXEVkSpYoub+XYSTU8Rg=o1xxMJ8=5z8B-g@mail.gmail.com/
Fixes: 9873964d6eb2 ("[PATCH] HWMON: w83791d: New hardware monitoring driver for the Winbond W83791D")
Cc: stable@vger.kernel.org
Signed-off-by: Gui-Dong Han <hanguidong02@gmail.com>
Link: https://lore.kernel.org/r/20251202180105.12842-1-hanguidong02@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Teach the memory hotplug path to tear down KASAN shadow that
was mapped during early boot when a memory block is offlined.
Track for each sclp_mem whether its range was covered by the early
KASAN shadow via an early_shadow_mapped flag. When such a block is
deconfigured and removed via sclp_config_mem_store(), compute the
corresponding shadow range and call vmemmap_free() to unmap the
boot mapped shadow, then clear the flag.
Using vmemmap_free() for the early shadow is safe despite the use
of large mappings in the boot-time KASAN setup. The initial shadow
is mapped with 1M and 2G pages, where possible. The minimum hotplug
memory block size is 128M and always aligned (the identity mapping
is at least 2G aligned), which corresponds to a 16M chunk of at
least 1M aligned shadow. PMD-mapped 1M shadow pages therefore
never need splitting, and PUD-mapped 2G shadow pages can now be
split following the preceding changes.
Relax the modify_pagetable() sanity check in vmem so that, with
KASAN enabled, it may also operate on the KASAN shadow region in
addition to the 1:1 mapping and vmemmap area. This allows the KASAN
shadow unmapping to reuse the common vmem helpers.
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Use scnprintf() instead of sprintf() for those cases where the destination
is an array and the size of the array is known at compile time.
This prevents theoretical buffer overflows, but also avoids that people
again and again spend time to figure out if the code is actually safe.
Reviewed-by: Jan Polensky <japo@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
