| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"The driver updates seem larger this time around, with changes is many
of the SoC specific drivers, both the custom drivers/soc ones and the
closely related subsystems (memory, bus, firmware, reset, ...).
The at91 platform gains support for sam9x7 chips in the soc and power
management code. This is the latest variant of one of the oldest still
supported SoC families, using the ARM9 (ARMv5) core.
As usual, the qualcomm snapdragon platform gets a ton of updates in
many of their drivers to add more features and additional SoC support.
Most of these are somewhat firmware related as the platform has a
number of firmware based interfaces to the kernel. A notable addition
here is the inclusion of trace events to two of these drivers.
Herve Codina and Christophe Leroy are now sending updates for
drivers/soc/fsl/ code through the SoC tree, this contains both PowerPC
and Arm specific platforms and has previously been problematic to
maintain. The first update here contains support for newer PowerPC
variants and some cleanups.
The turris mox firmware driver has a number of updates, mostly
cleanups.
The Arm SCMI firmware driver gets a major rework to modularize the
existing code into separately loadable drivers for the various
transports, the addition of custom NXP i.MX9 interfaces and a number
of smaller updates.
The Arm FF-A firmware driver gets a feature update to support the v1.2
version of the specification.
The reset controller drivers have some smaller cleanups and a newly
added driver for the Intel/Mobileye EyeQ5/EyeQ6 MIPS SoCs.
The memory controller drivers get some cleanups and refactoring for
Tegra, TI, Freescale/NXP and a couple more platforms.
Finally there are lots of minor updates to firmware (raspberry pi,
tegra, imx), bus (sunxi, omap, tegra) and soc (rockchips, tegra,
amlogic, mediatek) drivers and their DT bindings"
* tag 'soc-drivers-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (212 commits)
firmware: imx: remove duplicate scmi_imx_misc_ctrl_get()
platform: cznic: turris-omnia-mcu: Fix error check in omnia_mcu_register_trng()
bus: sunxi-rsb: Simplify code with dev_err_probe()
soc: fsl: qe: ucc: Export ucc_mux_set_grant_tsa_bkpt
soc: fsl: cpm1: qmc: Fix dependency on fsl_soc.h
dt-bindings: arm: rockchip: Add rk3576 compatible string to pmu.yaml
soc: fsl: qbman: Remove redundant warnings
soc: fsl: qbman: Use iommu_paging_domain_alloc()
MAINTAINERS: Add QE files related to the Freescale QMC controller
soc: fsl: cpm1: qmc: Handle QUICC Engine (QE) soft-qmc firmware
soc: fsl: cpm1: qmc: Add support for QUICC Engine (QE) implementation
soc: fsl: qe: Add missing PUSHSCHED command
soc: fsl: qe: Add resource-managed muram allocators
soc: fsl: cpm1: qmc: Introduce qmc_version
soc: fsl: cpm1: qmc: Rename SCC_GSMRL_MODE_QMC
soc: fsl: cpm1: qmc: Handle RPACK initialization
soc: fsl: cpm1: qmc: Rename qmc_chan_command()
soc: fsl: cpm1: qmc: Introduce qmc_{init,exit}_xcc() and their CPM1 version
soc: fsl: cpm1: qmc: Introduce qmc_init_resource() and its CPM1 version
soc: fsl: cpm1: qmc: Re-order probe() operations
...
|
|
Cross-merge networking fixes after downstream PR.
No conflicts (sort of) and no adjacent changes.
This merge reverts commit b3c9e65eb227 ("net: hsr: remove seqnr_lock")
from net, as it was superseded by
commit 430d67bdcb04 ("net: hsr: Use the seqnr lock for frames received via interlink port.")
in net-next.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Remove DMA platform header, from now on we use device tree for DMA
clients.
Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me>
Tested-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Remove unnecessary defines, as we dropped board files.
Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me>
Tested-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Delete the ep93xx board files.
Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me>
Tested-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Convert Cirrus EP93xx DMA to device tree usage:
- add OF ID match table with data
- add of_probe for device tree
- add xlate for m2m/m2p
- drop subsys_initcall code
- drop platform probe
- drop platform structs usage
>From now on it only supports device tree probing.
Co-developed-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me>
Tested-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
This is a platform/x86 library that can only be used on x86 devices.
so it makes sense that it lives under the platform_data/x86/ directory
instead.
No functional changes intended.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240909124952.1152017-4-andriy.shevchenko@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
This is a platform/x86 library that is mostly being used by other
drivers not directly under arch/x86 anyway (with the exception of the
Intel MID setup code) so it makes sense that it lives under the
platform_data/x86/ directory instead.
No functional changes intended.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240909124952.1152017-3-andriy.shevchenko@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
The OOBE experience fades the keyboard backlight in & out continuously,
and make the backlight uncontrollable using its device.
Workaround taken from
https://wiki.archlinux.org/index.php?title=ASUS_Zenbook_UM5606&diff=next&oldid=815547
Signed-off-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Luke D. Jones <luke@ljones.dev>
Link: https://lore.kernel.org/r/20240909223503.1445779-1-bas@basnieuwenhuizen.nl
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Replace ksz8830 with ksz88x3 for CHIP_ID definition and other
strings. This due to KSZ8830 not being an actual switch but the Chip
ID shared among KSZ8863/8873 switches, impossible to differentiate
from their Chip ID or Revision ID registers.
Now all KSZ*_CHIP_ID macros refer to actual, existing switches which
removes confusion.
Signed-off-by: Pieter Van Trappen <pieter.van.trappen@cern.ch>
Acked-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There are no in-tree users of platform data and any new ones should
either use device tree or static device properties, so let's remove
platform data support.
Tested-by: Andreas Kemnade <andreas@kemnade.info> # Tolino Shine2HD
Link: https://lore.kernel.org/r/20240824055047.1706392-4-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Bring in changes removing support for platform data from matrix-keypad
driver.
|
|
There are no more any board files that use the platform data for
gpio-davinci. We can remove the header defining it and port the code to
no longer store any context in pdata.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20240819151705.37258-1-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
There are no longer any users of the platform data struct. Remove
support for it from the driver.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://patch.msgid.link/20240814092629.9862-1-brgl@bgdev.pl
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
There are no more board files defining platform data for this driver so
remove the header and support from the driver.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20240821121456.19553-4-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Adds driver to enable PCIe board which uses AMD QDMA (the Queue-based
Direct Memory Access) subsystem. For example, Xilinx Alveo V70 AI
Accelerator devices.
https://www.xilinx.com/applications/data-center/v70.html
The QDMA subsystem is used in conjunction with the PCI Express IP block
to provide high performance data transfer between host memory and the
card's DMA subsystem.
+-------+ +-------+ +-----------+
PCIe | | | | | |
Tx/Rx | | | | AXI | |
<=======> | PCIE | <===> | QDMA | <====>| User Logic|
| | | | | |
+-------+ +-------+ +-----------+
The primary mechanism to transfer data using the QDMA is for the QDMA
engine to operate on instructions (descriptors) provided by the host
operating system. Using the descriptors, the QDMA can move data in both
the Host to Card (H2C) direction, or the Card to Host (C2H) direction.
The QDMA provides a per-queue basis option whether DMA traffic goes
to an AXI4 memory map (MM) interface or to an AXI4-Stream interface.
The hardware detail is provided by
https://docs.xilinx.com/r/en-US/pg302-qdma
Implements dmaengine APIs to support MM DMA transfers.
- probe the available DMA channels
- use dma_slave_map for channel lookup
- use virtual channel to manage dmaengine tx descriptors
- implement device_prep_slave_sg callback to handle host scatter gather
list
Signed-off-by: Nishad Saraf <nishads@amd.com>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://lore.kernel.org/r/20240819211948.688786-2-lizhi.hou@amd.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
KSZ8895/KSZ8864 is a switch family between KSZ8863/73 and KSZ8795, so it
shares some registers and functions in those switches already
implemented in the KSZ DSA driver.
Signed-off-by: Tristram Ha <tristram.ha@microchip.com>
Tested-by: Pieter Van Trappen <pieter.van.trappen@cern.ch>
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There are no longer any users of the platform data for davinci rawnand
in board files. We can remove the public pdata headers and move the
structures that are still used into the driver compilation unit while
removing the rest.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20240814122120.13975-1-brgl@bgdev.pl
|
|
The users of this driver were removed in 2013 in commit 28633c54bda6
("ARM: ux500: Rip out keypad initialisation which is no longer used").
Remove the driver as well.
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/Zr-gX0dfN4te_8VG@google.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
There are no longer any users of the ti-aemif driver that set up platform
data from board files. We can shrink the driver by removing support for
it.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20240809-ti-aemif-v1-1-27b1e5001390@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
The cyttsp4 touchscreen driver was contributed in 2013 and since then
has seen no updates. The driver uses platform data (no device tree
support) and there are no users of it in the mainline kernel. There were
occasional fixes to it for issues either found by static code analysis
tools or via visual inspection, but otherwise the driver is completely
untested.
Remove the driver.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/ZrAZ2cUow_z838tp@google.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
On almost all ASUS ROG series laptops the MCU used for the USB keyboard
also has a HID packet used for setting the brightness. This is usually
the same as the WMI method. But in some laptops the WMI method either
is missing or doesn't work, so we should default to the HID control.
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Acked-by: Benjamin Tissoires <bentiss@kernel.org>
Link: https://lore.kernel.org/r/20240713074733.77334-2-luke@ljones.dev
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Add support for vivobook fan profiles wmi call on the ASUS VIVOBOOK
to adjust power limits.
These fan profiles have a different device id than the ROG series
and different order. This reorders the existing modes.
As part of keeping the patch clean the throttle_thermal_policy_available
boolean stored in the driver struct is removed and
throttle_thermal_policy_dev is used in place (as on init it is zeroed).
Co-developed-by: Luke D. Jones <luke@ljones.dev>
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Signed-off-by: Mohamed Ghanmi <mohamed.ghanmi@supcom.tn>
Reviewed-by: Luke D. Jones <luke@ljones.dev>
Link: https://lore.kernel.org/r/20240609144849.2532-2-mohamed.ghanmi@supcom.tn
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Platform data is not used anywhere in the upstram kernel.
Drop support for it to simplify code maintenance.
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Some hardware need some time to switch from a bus to another. This can
cause the first transfers following the selection of a bus to fail.
There is no way to configure this kind of waiting time in the driver.
Add support for the 'settle-time-us' device-tree property. When set,
the i2c_mux_gpio_select() applies a delay before returning, leaving
enough time to the hardware to switch to the new bus.
Signed-off-by: Bastien Curutchet <bastien.curutchet@bootlin.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Acked-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"New Drivers:
- ROHM BD96801 Power Management IC
- Cirrus Logic CS40L50 Haptic Driver with Waveform Memory
- Marvell 88PM886 Power Management IC
New Device Support:
- Keyboard Backlight to ChromeOS Embedded Controller
- LEDs to ChromeOS Embedded Controller
- Charge Control to ChromeOS Embedded Controller
- HW Monitoring Service to ChromeOS Embedded Controller
- AUXADCs to MediaTek MT635{7,8,9} Power Management ICs
New Functionality:
- Allow Syscon consumers to supply their own Regmaps on registration
Fix-ups:
- Constify/staticise applicable data structures
- Remove superfluous/duplicated/unused sections
- Device Tree binding adaptions/conversions/creation
- Trivial; spelling, whitespace, coding-style adaptions
- Utilise centrally provided helpers and macros to aid
simplicity/duplication
- Drop i2c_device_id::driver_data where the value is unused
- Replace ACPI/DT firmware helpers with agnostic variants
- Move over to GPIOD (descriptor-based) APIs
- Annotate a bunch of __counted_by() cases
- Straighten out some includes
Bug Fixes:
- Ensure potentially asserted recent lines are deasserted during
initialisation
- Avoid "<module>.ko is added to multiple modules" warnings
- Supply a bunch of MODULE_DESCRIPTIONs to silence modpost warnings
- Fix Wvoid-pointer-to-enum-cast warnings"
* tag 'mfd-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (87 commits)
mfd: timberdale: Attach device properties to TSC2007 board info
mfd: tmio: Move header to platform_data
mfd: tmio: Sanitize comments
mfd: tmio: Update include files
mmc: tmio/sdhi: Fix includes
mfd: tmio: Remove obsolete io accessors
mfd: tmio: Remove obsolete platform_data
watchdog: bd96801_wdt: Add missing include for FIELD_*()
dt-bindings: mfd: syscon: Add APM poweroff mailbox
dt-bindings: mfd: syscon: Split and enforce documenting MFD children
dt-bindings: mfd: rk817: Merge support for RK809
dt-bindings: mfd: rk817: Fixup clocks and reference dai-common
dt-bindings: mfd: syscon: Add TI's opp table compatible
mfd: omap-usb-tll: Use struct_size to allocate tll
dt-bindings: mfd: Explain lack of child dependency in simple-mfd
dt-bindings: mfd: Dual licensing for st,stpmic1 bindings
mfd: omap-usb-tll: Annotate struct usbtll_omap with __counted_by
mfd: tps6594-core: Remove unneeded semicolon in tps6594_check_crc_mode()
mfd: lm3533: Move to new GPIO descriptor-based APIs
mfd: tps65912: Use devm helper functions to simplify probe
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Ilpo Järvinen:
- amd/pmf: Report system state changes using existing input events
- asus-wmi: Zenbook 2023 camera LED disable support and fix TUF laptop
keyboard RGB LED sysfs interface
- dell-pc: Fan modes / platform profile support
- hp-wmi: Fix platform profile switching on Omen/Victus laptops
- intel/ISST: Use only TPMI interface when TPMI and legacy interfaces
are available
- intel/pmc: LTR restore support to pair with LTR ignore
- intel/tpmi: Performance Limit Reasons (PLR) and APIC <-> Punit CPU
numbering mapping support
- WMI: driver override support and docs improvements
- lenovo-yoga-c630: Support for EC (platform/arm64)
- platform/arm64: Fix build with COMPILE_TEST (broke after addition of
C630)
- tools: Intel Speed Select Turbo Ratio Limit fix
- Miscellaneous cleanups / refactoring / improvements
* tag 'platform-drivers-x86-v6.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (65 commits)
platform/x86: asus-wmi: fix TUF laptop RGB variant
platform/x86/intel/tpmi/plr: Fix output in plr_print_bits()
Docs/admin-guide: Remove pmf leftover reference from the index
platform/x86: ideapad-laptop: use cleanup.h
platform/x86: hp-wmi: Fix implementation of the platform_profile_omen_get function
platform: arm64: EC_LENOVO_YOGA_C630 should depend on ARCH_QCOM
platform: arm64: EC_ACER_ASPIRE1 should depend on ARCH_QCOM
platform/x86/amd/pmf: Remove update system state document
platform/x86/amd/pmf: Use existing input event codes to update system states
platform/x86: hp-wmi: Fix platform profile option switch bug on Omen and Victus laptops
platform/x86:intel/pmc: Add support to undo ltr_ignore
platform/x86:intel/pmc: Use the Elvis operator
platform/x86:intel/pmc: Use DEFINE_SHOW_STORE_ATTRIBUTE macro
platform/x86:intel/pmc: Remove unneeded min_t check
platform/x86:intel/pmc: Add support to show ltr_ignore value
platform/x86:intel/pmc: Move pmc assignment closer to first usage
platform/x86:intel/pmc: Convert index variables to be unsigned
platform/x86:intel/pmc: Simplify mutex usage with cleanup helpers
platform/x86:intel/pmc: Use the return value of pmc_core_send_msg
tools/power/x86/intel-speed-select: v1.20 release
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control updates from Rafael Wysocki:
"These add some new hardware support (notably, the Lunar Lake platform
support in int340x and X1E80100 temperature sensor), continue to
rework the thermal driver interface to eliminate trip point IDs from
it, update DT bindings for a number of platforms and simplify probe in
a number of thermal drivers, address issues and clean up code.
Specifics:
- Add DLVR and MSI interrupt support for the Lunar Lake platform to
the int340x thermal driver (Srinivas Pandruvada)
- Enable workload type hints (WLT) support and power floor interrupt
support for the Lunar Lake platform in int340x ((Srinivas
Pandruvada)
- Switch Intel thermal drivers to new Intel CPU model defines (Tony
Luck)
- Clean up the int3400 and int3403 drivers (Erick Archer and David
Alan Gilbert)
- Improve intel_pch_thermal kernel log messages printed during
suspend to idle (Zhang Rui)
- Make the intel_tcc_cooling driver use a model-specific bitmask for
TCC offset (Ricardo Neri)
- Redesign the .set_trip_temp() thermal zone callback to take a trip
pointer instead of a trip ID and update its users (Rafael Wysocki)
- Avoid using invalid combinations of polling_delay and passive_delay
thermal zone parameters (Rafael Wysocki)
- Update a cooling device registration function to take a const
argument (Krzysztof Kozlowski)
- Make the uniphier thermal driver use thermal_zone_for_each_trip()
for walking trip points (Rafael Wysocki)
- Fix and clean up several minor shortcomings in thermal debug
(Rafael Wysocki)
- Rename __thermal_zone_set_trips() to thermal_zone_set_trips() and
make it use trip thresholds (Rafael Wysocki)
- Use READ_ONCE() for lockless access to trip temperature and
hysteresis (Rafael Wysocki)
- Drop unnecessary cooling device target state checks from the
Bang-Bang thermal governor (Rafael Wysocki)
- Avoid invoking thermal governor .trip_crossed() callback for
critical and hot trip points (Rafael Wysocki)
- Group all Renesas drivers inside a dedicated sub directory and add
the missing dependency to OF (Niklas Söderlund)
- Add suspend/resume support on k3_j72xx_bandgap and take the
opportunity to remove an unneeded delay in the init time code path
(Théo Lebrun)
- Fix thermal zone definition for MT8186 and MT8188 (Julien Panis)
- Convert hisilicon-thermal.txt to dt-schema (Abdulrasaq Lawani)
- Add DT bindings for the X1E80100 temperature sensor (Abel Vesa)
- Fix the thermal zone node name regular expression in the DT schema
(Krzysztof Kozlowski)
- Avoid failing thermal control initialization by using default
values on some platforms where calibration data is missing (Chen-Yu
Tsai)
- Fix the sensor cell size in DT for the Exynos platform (Krzysztof
Kozlowski)
- Bring the common definition of '#thermal-sensor-cells' property in
order to simplify the bindings on all the platforms where this
change makes sense and do some minor cleanups (Krzysztof Kozlowski)
- Fix a race between removal and clock disable in the broadcom
thermal driver (Krzysztof Kozlowski)
- Drop 'trips' DT node as required from the thermal zone bindings in
order to fix the remaining warnings appearing for thermal zones
without trip points (Rob Herring)
- Simplify all the drivers where dev_err_probe() can apply (Krzysztof
Kozlowski)
- Clean up code related to stih416 as this platform is not described
anywhere (Raphael Gallais-Pou)"
* tag 'thermal-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (81 commits)
thermal/drivers/sti: Cleanup code related to stih416
thermal/drivers/generic-adc: Simplify with dev_err_probe()
thermal/drivers/generic-adc: Simplify probe() with local dev variable
thermal/drivers/qcom-tsens: Simplify with dev_err_probe()
thermal/drivers/qcom-spmi-adc-tm5: Simplify with dev_err_probe()
thermal/drivers/imx: Simplify with dev_err_probe()
thermal/drivers/imx: Simplify probe() with local dev variable
thermal/drivers/hisi: Simplify with dev_err_probe()
thermal/drivers/exynos: Simplify with dev_err_probe()
thermal/drivers/exynos: Simplify probe() with local dev variable
thermal/drivers/broadcom: Simplify with dev_err_probe()
thermal/drivers/broadcom: Simplify probe() with local dev variable
thermal/drivers/broadcom: Fix race between removal and clock disable
dt-bindings: thermal: Drop 'trips' node as required
dt-bindings: thermal: qoriq: reference thermal-sensor schema
dt-bindings: thermal: cleanup examples indentation
dt-bindings: thermal: simplify few bindings
dt-bindings: thermal: ti,j72xx: reference thermal-sensor schema
dt-bindings: thermal: ti,am654: reference thermal-sensor schema
dt-bindings: thermal: st,stm32: reference thermal-sensor schema
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull arm SoC platform updates from Arnd Bergmann:
"The majority of the updates here are Dmitry Torokhov's cleanups for
platform code in the pxa and tegra platforms, changing custom
platform_data structures into DT-compatible software node
declarations.
The other updates are for the MAINTAINERS file, correcting some stale
or missing entries"
* tag 'soc-arm-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
ARM: pxa: fix build breakage on PXA3xx
ti: omap: MAINTAINERS: move Benoît Cousson to CREDITS
amazon: MAINTAINERS: change to odd fixes and Tsahee Zidenberg to CREDITS
MAINTAINERS: thead: add git tree
ARM: spitz: Use software nodes for the ADS7846 touchscreen
ARM: spitz: Use software nodes to describe LED GPIOs
ARM: spitz: Use software nodes to describe MMC GPIOs
ARM: spitz: Use software nodes to describe LCD GPIOs
ARM: spitz: Use software nodes to describe audio GPIOs
ARM: spitz: Use software nodes to describe SPI CS lines
ARM: spitz: Simplify instantiating SPI controller
ARM: pxa/gumstix: convert vbus gpio to use software nodes
ARM: pxa: consolidate GPIO chip platform data
ARM: spitz: fix GPIO assignment for backlight
ARM: tegra: paz00: Use software nodes to describe GPIOs for WiFi rfkill
MAINTAINERS: ARM: airoha: add entry to cover Airoha SoC
bus: vexpress-config: Add missing MODULE_DESCRIPTION() macro
arm64: layerscape: remove redundant EDAC_SUPPORT selection
dt-bindings: arm: Remove obsolete RTSM DCSCB binding
arm: vexpress: Remove obsolete RTSM DCSCB support
|
|
MCS-5000/5080 chips belong to the 1st generation of Melfas chips,
manufactured in 2000-2007.
The driver relies on custom platform data (no DT support) and there
never were any users of this driver in the mainline kernel. It is likely
that the driver was (like mcs5000_ts driver) was tested on S3C6410 NCP
board (with Samsung S3C6410 SoC), but the touchkey device was never
added to the board file. This board was removed in v6.3 in commit
743c8fbb90ca ("ARM: s3c: remove most s3c64xx board support").
Remove the driver since there are no users.
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20240714060029.1528662-2-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
MCS-5000 belongs to the 1st generation of Melfas chips, manufactured in
2000-2007.
The driver relies on custom platform data (no DT support) and there
never were any users of this driver in the mainline kernel. The commit
adding the driver mentioned that the driver was tested on S3C6410 NCP
board (with Samsung S3C6410 SoC) but the touchscreen device was never
added to the board file. This board was removed in v6.3 in commit
743c8fbb90ca ("ARM: s3c: remove most s3c64xx board support").
Remove the driver since there are no users.
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20240714060029.1528662-1-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Convert Spitz to use software nodes for specifying GPIOs for the MMC.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20240628180852.1738922-9-dmitry.torokhov@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
All the MFD components are gone from the header meanwhile. Only the MMC
relevant data is left which makes it a platform_data for the MMC
controller. Move the header to the now fitting directory.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # For MMC
Acked-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240213220221.2380-14-wsa+renesas@sang-engineering.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Adds a sysfs entry for the LED on F10 above the crossed out camera icon
on 2023 Zenbooks.
Signed-off-by: Devin Bayer <dev@doubly.so>
Link: https://lore.kernel.org/r/20240628084603.217106-1-dev@doubly.so
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Retrieving the supported versions of a command is a fairly common
operation. Provide a helper for it.
If the command is not supported at all the EC returns
-EINVAL/EC_RES_INVALID_PARAMS.
This error is translated into an empty version mask as that is easier to
handle for callers and they don't need to know about the error details.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20240630-cros_ec-charge-control-v5-3-8f649d018c52@weissschuh.net
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
|
|
The charge-control command v2/v3 is more featureful than v1, it
additionally supports charge thresholds.
The definitions were imported from ChromeOS EC commit
32870d602317 ("squirtle: modify motionsense rotation matrix")
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20240630-cros_ec-charge-control-v5-2-8f649d018c52@weissschuh.net
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
|
|
Lenovo Yoga C630 WOS is a laptop using Snapdragon 850 SoC. Like many
laptops it uses an embedded controller (EC) to perform various platform
operations, including, but not limited, to Type-C port control or power
supply handlng.
Add the driver for the EC, that creates devices for UCSI and power
supply devices.
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240614-yoga-ec-driver-v7-2-9f0b9b40ae76@linaro.org
[ij: added #include <linux/cleanup.h>]
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
New CPU #defines encode vendor and family as well as model.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Upgrade EC_CMD_GET_NEXT_EVENT to version 3.
The max supported version will be v3. So, we speak v3 even if the EC
says it supports v4+.
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Link: https://lore.kernel.org/r/20240604230837.2878737-1-dnojiri@chromium.org
[tzungbi: uint32_t -> u32 per suggested by checkpatch.pl]
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
|
|
Add struct ec_response_get_next_event_v3 to upgrade
EC_CMD_GET_NEXT_EVENT to version 3.
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Link: https://lore.kernel.org/r/20240604170552.2517189-1-dnojiri@chromium.org
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
|
|
To read from the EC memory different mechanism are possible.
ECs connected via LPC expose their memory via a ->cmd_readmem operation.
Other protocols require the usage of EC_CMD_READ_MEMMAP, which on the
other hand is not implemented by LPC ECs.
Provide a helper that automatically selects the correct mechanism.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20240529-cros_ec-hwmon-v4-1-5cdf0c5db50a@weissschuh.net
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc and other driver subsystem updates from Greg KH:
"Here is the big set of char/misc and other driver subsystem updates
for 6.10-rc1. Nothing major here, just lots of new drivers and updates
for apis and new hardware types. Included in here are:
- big IIO driver updates with more devices and drivers added
- fpga driver updates
- hyper-v driver updates
- uio_pruss driver removal, no one uses it, other drivers control the
same hardware now
- binder minor updates
- mhi driver updates
- excon driver updates
- counter driver updates
- accessability driver updates
- coresight driver updates
- other hwtracing driver updates
- nvmem driver updates
- slimbus driver updates
- spmi driver updates
- other smaller misc and char driver updates
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (319 commits)
misc: ntsync: mark driver as "broken" to prevent from building
spmi: pmic-arb: Add multi bus support
spmi: pmic-arb: Register controller for bus instead of arbiter
spmi: pmic-arb: Make core resources acquiring a version operation
spmi: pmic-arb: Make the APID init a version operation
spmi: pmic-arb: Fix some compile warnings about members not being described
dt-bindings: spmi: Deprecate qcom,bus-id
dt-bindings: spmi: Add X1E80100 SPMI PMIC ARB schema
spmi: pmic-arb: Replace three IS_ERR() calls by null pointer checks in spmi_pmic_arb_probe()
spmi: hisi-spmi-controller: Do not override device identifier
dt-bindings: spmi: hisilicon,hisi-spmi-controller: clean up example
dt-bindings: spmi: hisilicon,hisi-spmi-controller: fix binding references
spmi: make spmi_bus_type const
extcon: adc-jack: Document missing struct members
extcon: realtek: Remove unused of_gpio.h
extcon: usbc-cros-ec: Convert to platform remove callback returning void
extcon: usb-gpio: Convert to platform remove callback returning void
extcon: max77843: Convert to platform remove callback returning void
extcon: max3355: Convert to platform remove callback returning void
extcon: intel-mrfld: Convert to platform remove callback returning void
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight
Pull backlight updates from Lee Jones:
"Fix-ups:
- FB Backlight interaction overhaul
- Remove superfluous code and simplify overall
- Constify various structs and struct attributes
Bug Fixes:
- Repair LED flickering
- Fix signedness bugs"
* tag 'backlight-next-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight: (42 commits)
backlight: sky81452-backlight: Remove unnecessary call to of_node_get()
backlight: mp3309c: Fix LEDs flickering in PWM mode
backlight: otm3225a: Drop driver owner assignment
backlight: lp8788: Drop support for platform data
backlight: lcd: Make lcd_class constant
backlight: Make backlight_class constant
backlight: mp3309c: Fix signedness bug in mp3309c_parse_fwnode()
const_structs.checkpatch: add lcd_ops
fbdev: omap: lcd_ams_delta: Constify lcd_ops
fbdev: imx: Constify lcd_ops
fbdev: clps711x: Constify lcd_ops
HID: picoLCD: Constify lcd_ops
backlight: tdo24m: Constify lcd_ops
backlight: platform_lcd: Constify lcd_ops
backlight: otm3225a: Constify lcd_ops
backlight: ltv350qv: Constify lcd_ops
backlight: lms501kf03: Constify lcd_ops
backlight: lms283gf05: Constify lcd_ops
backlight: l4f00242t03: Constify lcd_ops
backlight: jornada720_lcd: Constify lcd_ops
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
"i2c core removes an argument from the i2c_mux_add_adapter() call to
further deprecate class based I2C device instantiation. All users are
converted, too.
Other that that, Andi collected a number if I2C host driver patches.
Those merges have their own description"
* tag 'i2c-for-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (72 commits)
power: supply: sbs-manager: Remove class argument from i2c_mux_add_adapter()
i2c: mux: Remove class argument from i2c_mux_add_adapter()
i2c: synquacer: Fix an error handling path in synquacer_i2c_probe()
i2c: acpi: Unbind mux adapters before delete
i2c: designware: Replace MODULE_ALIAS() with MODULE_DEVICE_TABLE()
i2c: pxa: use 'time_left' variable with wait_event_timeout()
i2c: s3c2410: use 'time_left' variable with wait_event_timeout()
i2c: rk3x: use 'time_left' variable with wait_event_timeout()
i2c: qcom-geni: use 'time_left' variable with wait_for_completion_timeout()
i2c: jz4780: use 'time_left' variable with wait_for_completion_timeout()
i2c: synquacer: use 'time_left' variable with wait_for_completion_timeout()
i2c: stm32f7: use 'time_left' variable with wait_for_completion_timeout()
i2c: stm32f4: use 'time_left' variable with wait_for_completion_timeout()
i2c: st: use 'time_left' variable with wait_for_completion_timeout()
i2c: omap: use 'time_left' variable with wait_for_completion_timeout()
i2c: imx-lpi2c: use 'time_left' variable with wait_for_completion_timeout()
i2c: hix5hd2: use 'time_left' variable with wait_for_completion_timeout()
i2c: exynos5: use 'time_left' variable with wait_for_completion_timeout()
i2c: digicolor: use 'time_left' variable with wait_for_completion_timeout()
i2c: amd-mp2-plat: use 'time_left' variable with wait_for_completion_timeout()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Hans de Goede:
- New drivers/platform/arm64 directory for arm64 embedded-controller
drivers
- New drivers:
- Acer Aspire 1 embedded controllers (for arm64 models)
- ACPI quickstart PNP0C32 buttons
- Dell All-In-One backlight support (dell-uart-backlight)
- Lenovo WMI camera buttons
- Lenovo Yoga Tablet 2 Pro 1380F/L fast charging
- MeeGoPad ANX7428 Type-C Cross Switch (power sequencing only)
- MSI WMI sensors (fan speed sensors only for now)
- Asus WMI:
- 2024 ROG Mini-LED support
- MCU powersave support
- Vivobook GPU MUX support
- Misc. other improvements
- Ideapad laptop:
- Export FnLock LED as LED class device
- Switch platform profiles using thermal management key
- Intel drivers:
- IFS: various improvements
- PMC: Lunar Lake support
- SDSI: various improvements
- TPMI/ISST: various improvements
- tools: intel-speed-select: various improvements
- MS Surface drivers:
- Fan profile switching support
- Surface Pro thermal sensors support
- ThinkPad ACPI:
- Reworked hotkey support to use sparse keymaps
- Add support for new trackpoint-doubletap, Fn+N and Fn+G hotkeys
- WMI core:
- New WMI driver development guide
- x86 Android tablets:
- Lenovo Yoga Tablet 2 Pro 1380F/L support
- Xiaomi MiPad 2 status LED and bezel touch buttons backlight
support
- Miscellaneous cleanups / fixes / improvements
* tag 'platform-drivers-x86-v6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (128 commits)
platform/x86: Add new MeeGoPad ANX7428 Type-C Cross Switch driver
devm-helpers: Fix a misspelled cancellation in the comments
tools arch x86: Add dell-uart-backlight-emulator
platform/x86: Add new Dell UART backlight driver
platform/x86: x86-android-tablets: Create LED device for Xiaomi Pad 2 bottom bezel touch buttons
platform/x86: x86-android-tablets: Xiaomi pad2 RGB LED fwnode updates
platform/x86: x86-android-tablets: Pass struct device to init()
platform/x86/amd: pmc: Add new ACPI ID AMDI000B
platform/x86/amd: pmf: Add new ACPI ID AMDI0105
platform/x86: p2sb: Don't init until unassigned resources have been assigned
platform/surface: aggregator: Log critical errors during SAM probing
platform/x86: ISST: Support SST-BF and SST-TF per level
platform/x86/fujitsu-laptop: Replace sprintf() with sysfs_emit()
tools/power/x86/intel-speed-select: v1.19 release
tools/power/x86/intel-speed-select: Display CPU as None for -1
tools/power/x86/intel-speed-select: SST BF/TF support per level
tools/power/x86/intel-speed-select: Increase number of CPUs displayed
tools/power/x86/intel-speed-select: Present all TRL levels for turbo-freq
tools/power/x86/intel-speed-select: Fix display for unsupported levels
tools/power/x86/intel-speed-select: Support multiple dies
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"This one became bigger than usual, not in the total size but rather
containing lots of small changes all over the places.
The majority of changes are about ASoC, especially SOF / Intel stuff,
and we see an interesting work for ASoC DAPM graph visualization,
while there are many other code cleanup and refactoring, too.
Core:
- A deadlock fix at device disconnection
- A new tool dapm-graph for visualising the DAPM state
ASoC:
- Large updates throughout the Intel audio drivers
- Fixes and clarifications for the DAPM documentation
- Cleanups of accessors for driver data, module labelling, and for
constification
- Modernsation and cleanup work in the Mediatek drivers
- Several fixes and features for the DaVinci I2S driver
- New drivers for several AMD and Intel platforms, Nuvoton NAU8325,
Rockchip RK3308 and Texas Instruments PCM6240
HD-audio:
- Cleanup for CONFIG_PM dependencies
- Cirrus HD-audio codec fixes and quirks
Others:
- Series of tree-wide fixes in Makefiles to use *-y
- Additions of missing module descriptions
- Scarlett2 USB mixer enhancements
- A series of legacy emu10k1 fixes and improvements"
* tag 'sound-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (603 commits)
ALSA: hda/realtek: Drop doubly quirk entry for 103c:8a2e
ALSA: hda/realtek - fixed headset Mic not show
ASoC: SOF: amd: Fix build error with built-in config
ALSA: scarlett2: Increase mixer range to +12dB
ALSA: scarlett2: Add S/PDIF source selection controls
ALSA: core: Remove superfluous CONFIG_PM
ALSA: Fix deadlocks with kctl removals at disconnection
ASoC: audio-graph-card2: call of_node_get() before of_get_next_child()
ASoC: SOF: amd: Correct spaces in Makefile
ASoC: rt715-sdca-sdw: Fix wrong complete waiting in rt715_dev_resume()
ASoC: Intel: sof_sdw_rt_amp: use dai parameter
ASoC: Intel: sof_sdw: add dai parameter to rtd_init callback
ASoC: Intel: sof_sdw: use .controls/.widgets to add controls/widgets
ASoC: Intel: sof_sdw: add controls and dapm widgets in codec_info
ASoC: Intel: sof_sdw: use generic name for controls/widgets
ASoC: Intel: sof_sdw_cs_amp: rename Speakers to Speaker
ASoC: Intel: maxim-common: change max98373 data to static
ASoC: Intel: sof_sdw: add max98373 dapm routes
ASoC: Intel: sof_rt5682: use max_98373_dai_link function
ASoC: Intel: sof_nau8825: use max_98373_dai_link function
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown:
"The diffstat for this release is dominated by the new Airoha driver,
mainly as a result of this being a generally quite quiet release.
There were a couple of cleanups in the core but nothing substantial,
the updates here are almost all driver specific ones.
- Support for multi-word mode in the OMAP2 McSPI driver
- Overhaul of the PXA2xx driver, mostly API updates
- A number of DT binding conversions
- Support for Airoha NAND controllers, Cirrus Logic CS35L56, Mobileye
EYEQ5 and Renesas R8A779H0"
* tag 'spi-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (87 commits)
spi: dw: Bail out early on unsupported target mode
spi: Remove unneded check for orig_nents
MAINTAINERS: repair file entry in AIROHA SPI SNFI DRIVER
spi: pxa2xx: Drop the stale entry in documentation TOC
spi: pxa2xx: Don't provide struct chip_data for others
spi: pxa2xx: Remove timeout field from struct chip_data
spi: pxa2xx: Remove DMA parameters from struct chip_data
spi: pxa2xx: Drop struct pxa2xx_spi_chip
spi: pxa2xx: Don't use "proxy" headers
spi: pxa2xx: Remove outdated documentation
spi: pxa2xx: Move contents of linux/spi/pxa2xx_spi.h to a local one
spi: pxa2xx: Provide num-cs for Sharp PDAs via device properties
spi: pxa2xx: Allow number of chip select pins to be read from property
spi: dt-bindings: ti,qspi: convert to dtschema
spi: bitbang: Add missing MODULE_DESCRIPTION()
spi: bitbang: Use NSEC_PER_*SEC rather than hard coding
spi: dw: Drop default number of CS setting
spi: dw: Convert dw_spi::num_cs to u32
spi: dw: Add a number of native CS auto-detection
spi: dw: Convert to using BITS_TO_BYTES() macro
...
|
|
i801 as only user of gpio i2c mux removed support for class-based device
instantiation on muxed busses. Class-based device instantiation is a
legacy mechanism and shouldn't be used in new code, therefore remove
support also here.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
There are no more users that need the legacy idle quirk so let's drop
the legacy idle quirk handling. This simplifies the PM code to just
sysc_pm_ops with unified handling for all the interconnect targets.
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
This UIO driver was used to control the PRU processors found on various
TI SoCs. It was created before the Remoteproc framework, but now with
that we have a standard way to program and manage the PRU processors.
The proper PRU Remoteproc driver should be used instead of this driver.
This driver only supported the original class of PRUSS (OMAP-L1xx /
AM17xx / AM18xx / TMS320C674x / DA8xx) but when these platforms were
switched to use Device Tree the support for DT was not added to this
driver and so it is now unused/unusable. Support for these platforms
can be added to the proper PRU Remoteproc driver if ever needed.
Remove this driver.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240410144803.126831-1-afd@ti.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
