| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap updates from Mark Brown:
"Another small update for regmap, we have one new feature plus a little
bit of cleanup:
- Support for sparseness information in the flat cache, allowing
users that really need the performance properties it provides to
benefit from the interface and startup time improvements that
sparsness provides without needing to go all the way to a more
fancy data structure
- Cleanup work from Andy Shevchenko, refactoring the cache interface
in preparation for some future stuff he's working on"
* tag 'regmap-v6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: sdw-mbq: Reorder regmap_mbq_context struct for better packing
regmap: i3c: Use ARRAY_SIZE()
regcache: maple: Split ->populate() from ->init()
regcache: flat: Split ->populate() from ->init()
regcache: flat: Remove unneeded check and error message for -ENOMEM
regcache: rbtree: Split ->populate() from ->init()
regcache: Add ->populate() callback to separate from ->init()
regmap: warn users about uninitialized flat cache
regmap: add flat cache with sparse validity
|
|
Merge series from Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>:
This patchset has 4 fixes and some enhancements to the Elite DSP driver
support.
Fixes includes
- setting correct flags for expected behaviour of appl_ptr
- fix closing of copp instances
- fix buffer alignment.
- fix state checks before closing asm stream
Enhancements include:
- adding q6asm_get_hw_pointer and ack callback support
- simplify code via __free(kfree) mechanism.
- use spinlock guards
- few cleanups discovered during doing above 2.
There is another set of updates comming soon, which will add support
for early memory mapping and few more modules support in audioreach.
|
|
The flat regcache will always assume the data in the cache is valid.
Since the cache is preferred over hardware access, this may shadow the
actual state of the device.
Add a new containing cache structure with the flat data table and a
bitmap indicating cache validity. REGCACHE_FLAT will still behave as
before, as the validity is ignored.
Define new cache type REGCACHE_FLAT_S: a flat cache with sparse
validity. The sparse validity is used to determine if a hardware access
should occur to initialize the cache on the fly, vs. at regmap init for
REGCACHE_FLAT. Contrary to REGCACHE_FLAT, this allows us to implement
regcache_ops.drop.
Signed-off-by: Sander Vanheule <sander@svanheule.net>
Link: https://patch.msgid.link/20251029081248.52607-2-sander@svanheule.net
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Per commit 9442490a0286 ("regmap: irq: Support wake IRQ mask inversion")
the wake_invert flag is to support enable register, so cleared bits are
wake disabled.
Fixes: 68622bdfefb9 ("regmap: irq: document mask/wake_invert flags")
Cc: stable@vger.kernel.org
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Link: https://patch.msgid.link/20251024082344.2188895-1-shawnguo2@yeah.net
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Currently, the code assumes that the device that registered the
MBQ register map is the actual SoundWire slave device. This works
fine for all current users, however future SDCA devices will
likely be implemented with the SoundWire slave as a parent device
and separate child drivers with regmaps for each audio Function.
Update the regmap_init_sdw_mbq_cfg macro to allow these two
to be specified separately.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20251020155512.353774-3-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Document that using the MMIO helpers will automatically enable the
'fast_io' parameter. This makes the used locking scheme more transparent
and avoids superfluous setting of this parameter in drivers.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://patch.msgid.link/20250725110337.4303-2-wsa+renesas@sang-engineering.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Some GPIO chips allow to rise an IRQ on GPIO level changes but do not
provide an IRQ status for each separate line: only the current gpio
level can be retrieved.
Add support for these chips, emulating IRQ status by comparing GPIO
levels with the levels during the previous interrupt.
Signed-off-by: Mathieu Dubois-Briand <mathieu.dubois-briand@bootlin.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20250522-mdb-max7360-support-v9-5-74fc03517e41@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The defaults array in regcache must be sorted into ascending register
address order, because binary search is used to locate values in
the array. Add a helper to sort the register defaults array which
can be useful for systems that dynamically create a defaults array
based on external information.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20250217140159.2288784-2-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Merge series from Charles Keepax <ckeepax@opensource.cirrus.com>:
The current SDCA MBQ (Multi-Byte Quantities) register map only
supports 16-bit types, add support for more sizes and then update
the rt722 driver to use the new support. We also add support for
the deferring feature of MBQs to allow hardware to indicate it is
not currently ready to service a read/write.
Afraid I don't have hardware to test the rt722 change so it is
only build tested, but I thought it good to include a change to
demonstrate the new features in use.
|
|
The SDCA specification allows for controls to be deferred. In the case
of a deferred control the device will return COMMAND_IGNORED to the
8-bit operation that would cause the value to commit. Which is the
final 8-bits on a write, or the first 8-bits on a read. In the case of
receiving a defer, the regmap will poll the SDCA function busy bit,
after which the transaction will be retried, returning an error if the
function busy does not clear within a chip specific timeout. Since
this is common SDCA functionality which is the 99% use-case for MBQs
it makes sense to incorporate this functionality into the register
map. If no MBQ configuration is specified, the behaviour will default
to the existing behaviour.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250107154408.814455-5-ckeepax@opensource.cirrus.com
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
SoundWire MBQ register maps typically contain a variety of register
sizes, which doesn't map ideally to the regmap abstraction which
expects register maps to have a consistent size. Currently the MBQ
register map only allows 16-bit registers to be defined, however
this leads to complex CODEC driver implementations with an 8-bit
register map and a 16-bit MBQ, every control will then have a custom
get and put handler that allows them to access different register
maps. Further more 32-bit MBQ quantities are not currently supported.
Add support for additional MBQ sizes and to avoid the complexity
of multiple register maps treat the val_size as a maximum size for
the register map. Within the regmap use an ancillary callback to
determine how many bytes to actually read/write to the hardware for
a specific register. In the case that no callback is defined the
behaviour defaults back to the existing behaviour of a fixed size
register map.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250107154408.814455-4-ckeepax@opensource.cirrus.com
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Mark the list of registers passed into regmap_multi_reg_read() as a
pointer to const. This allows the caller to define the register list
as const data.
This requires making the same change to _regmap_bulk_read(), which is
called by regmap_multi_reg_read().
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20241211133558.884669-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap updates from Mark Brown:
"The main thing for regmap this time around is some improvements of the
lockdep annotations which stop some false positives. We also have one
new helper for setting a bitmask to the same value, and several test
improvements"
* tag 'regmap-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: provide regmap_assign_bits()
regmap: irq: Set lockdep class for hierarchical IRQ domains
regmap: maple: Provide lockdep (sub)class for maple tree's internal lock
regmap: kunit: Fix repeated test param
regcache: Improve documentation of available cache types
regmap: Specifically test writing 0 as a value to sparse caches
regmap-irq: Consistently use memset32() in regmap_irq_thread()
|
|
Add another bits helper to regmap API: this one sets given bits if value
is true and clears them if it's false.
Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patch.msgid.link/20241108-assign-bits-v1-1-382790562d99@ideasonboard.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Function descriptions in iopoll.h, regmap.h, phy.h and sound/soc/sof/ops.h
copied all the same outdated documentation about sleep/delay function
limitations. In those comments, the generic (and still outdated) timer
documentation file is referenced.
As proper function descriptions for used delay and sleep functions are in
place, simply update the descriptions to reference to them. While at it fix
missing colon after "Returns" in function description and move return value
description to the end of the function description.
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch> # for phy.h
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/all/20241014-devel-anna-maria-b4-timers-flseep-v3-12-dc8b907cb62f@linutronix.de
|
|
There is some user confusion about which cache types to choose when which
is not helped by the lack of any central documentation providing an
overview of what's available. Provide a short overview in the API header to
try to help reduce this.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://patch.msgid.link/20240924-regcache-document-types-v1-1-e157054e1215@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
When multiple IRQ domains are created from the same device-tree node they
will get the same name based on the device-tree path. This will cause a
naming collision in debugFS when IRQ domain specific entries are created.
The regmap-IRQ creates per instance IRQ domains. This will lead to a
domain name conflict when a device which provides more than one
interrupt line uses the regmap-IRQ.
Add support for specifying an IRQ domain name suffix when creating a
regmap-IRQ controller.
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Link: https://patch.msgid.link/776bc4996969e5081bcf61b9bdb5517e537147a3.1723120028.git.mazziesaccount@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Merge series from Guenter Roeck <linux@roeck-us.net>:
regmap_multi_reg_read() is similar to regmap_bilk_read() but reads from
an array of non-sequential registers. It is helpful if multiple non-
sequential registers need to be read in a single operation which would
otherwise have to be mutex protected.
The name of the new function was chosen to match the existing function
regmap_multi_reg_write().
|
|
regmap_multi_reg_read() is similar to regmap_bilk_read() but reads from
an array of non-sequential registers.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20240710015622.1960522-2-linux@roeck-us.net
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The struct instances supplied by the drivers are never modified.
Handle them as const in the regmap core allowing the drivers to put them
into .rodata.
Also add a new entry to const_structs.checkpatch to make sure future
instances of this struct already enter the tree as const.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://patch.msgid.link/20240706-regmap-const-structs-v1-2-d08c776da787@weissschuh.net
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
On x86_64 and allmodconfig, this shrinks the size of 'struct regmap_config'
from 328 to 312 bytes.
This is usually a win, because this structure is used as a static global
variable.
When moving the kerneldoc fields, I've tried to keep the layout as
consistent as possible, which is not really easy!
Before:
/* size: 328, cachelines: 6, members: 55 */
/* sum members: 296, holes: 6, sum holes: 25 */
/* padding: 7 */
/* last cacheline: 8 bytes */
After:
/* size: 312, cachelines: 5, members: 55 */
/* sum members: 296, holes: 5, sum holes: 16 */
/* last cacheline: 56 bytes */
For the records, this is also widely used:
$git grep static.*regmap_config | wc -l
1327
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/5e039cd8fe415dd7ab3169948c08a5311db9fb9a.1715024007.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add a regmap_read_bypassed() to allow reads from the hardware registers
while the regmap is in cache-only mode.
A typical use for this is to keep the cache in cache-only mode until
the hardware has reached a valid state, but one or more status registers
must be polled to determine when this state is reached.
For example, firmware download on the cs35l56 can take several seconds if
there are multiple amps sharing limited bus bandwidth. This is too long
to block in probe() so it is done as a background task. The device must
be soft-reset to reboot the firmware and during this time the registers are
not accessible, so the cache should be in cache-only. But the driver must
poll a register to detect when reboot has completed.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 8a731fd37f8b ("ASoC: cs35l56: Move utility functions to shared file")
Link: https://msgid.link/r/20240408101803.43183-2-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
When regmap consists of single register, 'regmap' subsystem is unable to
understand whether ->max_register is set or not, because in both cases it
is equal to zero. It leads to that the logic based on value of
->max_register doesn't work. For example using of REGCACHE_FLAT fails.
This patch introduces an extra parameter to regmap config, indicating
that zero value in ->max_register is authentic.
Signed-off-by: Jan Dakinevich <jan.dakinevich@salutedevices.com>
Link: https://lore.kernel.org/r/20240126200836.1829995-1-jan.dakinevich@salutedevices.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The HDA driver has a use case for checking if a register is cached which
it bodges in awkwardly and unclearly. Provide an API which allows it to
directly do what it's trying to do.
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230717-regmap-cache-check-v1-1-73ef688afae3@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
No remaining users, use a custom .get_irq_reg() callback instead.
Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com
Link: https://lore.kernel.org/r/20230511091342.26604-3-aidanmacdonald.0x0@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org
|
|
No remaining users, these have been replaced by config registers.
Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com
Link: https://lore.kernel.org/r/20230511091342.26604-2-aidanmacdonald.0x0@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org
|
|
No remaining users, and it's been replaced by config registers.
Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com
Link: https://lore.kernel.org/r/20230509110100.3980123-3-aidanmacdonald.0x0@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org
|
|
It refers to a non-existent "num_type_settings" value, which is
an old name I'd used during development of config registers and
later dropped because it wasn't very clear.
The correct bound for the range is num_config_regs, which can
be verified by checking the implementation.
Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com
Link: https://lore.kernel.org/r/20230509110100.3980123-2-aidanmacdonald.0x0@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org
|
|
Remove the map parameter from the struct regmap_irq_chip callback
handle_mask_sync() because it can be passed via the irq_drv_data
parameter instead. The gpio-104-dio-48e driver is the only consumer of
this callback and is thus updated accordingly.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org
Signed-off-by: William Breathitt Gray <william.gray@linaro.org
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com
Link: https://lore.kernel.org/r/1f44fb0fbcd3dccea3371215b00f1b9a956c1a12.1679323449.git.william.gray@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org
|
|
Similar to the existing reg_downshift mechanism, that is used to
translate register addresses on busses that have a smaller address
stride, it's also possible to want to upshift register addresses.
Such a case was encountered when network PHYs and PCS that usually sit
on a MDIO bus (16-bits register with a stride of 1) are integrated
directly as memory-mapped devices. Here, the same register layout
defined in 802.3 is used, but the register now have a larger stride.
Introduce a mechanism to also allow upshifting register addresses.
Re-purpose reg_downshift into a more generic, signed reg_shift, whose
sign indicates the direction of the shift. To avoid confusion, also
introduce macros to explicitly indicate if we want to downshift or
upshift.
For bisectability, change any use of reg_downshift to use reg_shift.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Tested-by: Colin Foster <colin.foster@in-advantage.com>
Link: https://lore.kernel.org/r/20230407152604.105467-1-maxime.chevallier@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Merge series from William Breathitt Gray <william.gray@linaro.org>:
The regmap API supports IO port accessors so we can take advantage of
regmap abstractions rather than handling access to the device registers
directly in the driver.
A patch to pass irq_drv_data as a parameter for struct regmap_irq_chip
set_type_config() is included. This is needed by the
idio_24_set_type_config() and ws16c48_set_type_config() callbacks in
order to update the type configuration on their respective devices.
|
|
Allow the struct regmap_irq_chip set_type_config() callback to access
irq_drv_data by passing it as a parameter.
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20e15cd3afae80922b7e0577c7741df86b3390c5.1680708357.git.william.gray@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The current state of the art for sparse register maps is the
rbtree cache. This works well for most applications but isn't
always ideal for sparser register maps since the rbtree can get
deep, requiring a lot of walking. Fortunately the kernel has a
data structure intended to address this very problem, the maple
tree. Provide an initial implementation of a register cache
based on the maple tree to start taking advantage of it.
The entries stored in the maple tree are arrays of register
values, with the maple tree keys holding the register addresses.
We store data in host native format rather than device native
format as we do for rbtree, this will be a benefit for devices
where we don't marshal data within regmap and simplifies the code
but will result in additional CPU overhead when syncing the cache
on devices where we do marshal data in regmap.
This should work well for a lot of devices, though there's some
additional areas that could be looked at such as caching the
last accessed entry like we do for rbtree and trying to minimise
the maple tree level locking. We should also use bulk writes
rather than single register writes when resyncing the cache where
possible, even if we don't store in device native format.
Very small register maps may continue to to better with rbtree
longer term.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230325-regcache-maple-v3-2-23e271f93dc7@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The compressed register cache support has assumptions that make it hard to
cover in testing, mainly that it requires raw registers defaults be
provided. Rather than either address these assumptions or leave it untested
by the forthcoming KUnit tests let's remove it, the use case is quite thin
and there are no current users.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230324-regcache-lzo-v1-1-08c5d63e2a5e@kernel.org
|
|
Merge series from William Breathitt Gray <william.gray@linaro.org>:
There are devices which have interrupt support with mask and ack
registers but no status register. Add a flag which lets us support
them, we just assume that all the interrupts fired.
|
|
It seems that a couple of members got lost theirorder, put them back.
Besides that, split field descriptions into groups in the same way
as it's done in the structure definition.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230220153334.87049-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Some devices lack status registers, yet expect to handle interrupts.
Introduce a no_status flag to indicate such a configuration, where
rather than read a status register to verify, all interrupts received
are assumed to be active.
Cc: Mark Brown <broonie@kernel.org>
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Link: https://lore.kernel.org/r/bd501b4b5ff88da24d467f75e8c71b4e0e6f21e2.1677515341.git.william.gray@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
mask_invert is deprecated and no longer used; it can now be removed.
Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com>
Link: https://lore.kernel.org/r/20230216223200.150679-2-aidanmacdonald.0x0@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
type_invert is deprecated and no longer used; it can now be removed.
Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com>
Link: https://lore.kernel.org/r/20230216223200.150679-1-aidanmacdonald.0x0@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Group some bool variables to reduce hole and avoid padding.
On x86_64, this shrinks the size from 136 to 128 bytes.
As an example:
$ size drivers/base/regmap/regmap-fsi.o (Before)
text data bss dec hex filename
4837 136 0 4973 136d drivers/base/regmap/regmap-fsi.o
$ size drivers/base/regmap/regmap-fsi.o (After)
text data bss dec hex filename
4701 136 0 4837 12e5 drivers/base/regmap/regmap-fsi.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/077ca39622c8870a3ea932298a9cec34f7a8295a.1676363976.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The MDIO subsystem is getting rid of MII_ADDR_C45 and thus also
encoding associated encoding of the C45 device address and register
address into one value. regmap-mdio also uses this encoding for the
C45 bus.
Move to the new C45 helpers for MDIO access and provide regmap-mdio
helper macros.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Michael Walle <michael@walle.cc>
Link: https://lore.kernel.org/r/20230116111509.4086236-1-michael@walle.cc
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Provide a public callback handle_mask_sync() that drivers can use when
they have more complex IRQ masking logic. The default implementation is
regmap_irq_handle_mask_sync(), used if the chip doesn't provide its own
callback.
Cc: Mark Brown <broonie@kernel.org>
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Link: https://lore.kernel.org/r/e083474b3d467a86e6cb53da8072de4515bd6276.1669100542.git.william.gray@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Merge series from Eddie James <eajames@linux.ibm.com>:
The SBEFIFO hardware can now be attached over a new I2C endpoint interface
called the I2C Responder (I2CR). In order to use the existing SBEFIFO
driver, add a regmap driver for the FSI bus and an endpoint driver for the
I2CR. Then, refactor the SBEFIFO and OCC drivers to clean up and use the
new regmap driver or the I2CR interface.
This branch just has the regmap change so it can be shared with the FSI
code.
|
|
Add regmap support for the FSI bus.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Link: https://lore.kernel.org/r/20221102205148.1334459-2-eajames@linux.ibm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
With the dawn of MMIO gpio-regmap users, it is desirable to let
gpio-regmap ask the regmap if it might sleep during an access so
it can pass that information to gpiochip. Add a new regmap_might_sleep()
to query the regmap.
Signed-off-by: Michael Walle <michael@walle.cc>
Link: https://lore.kernel.org/r/20221121150843.1562603-1-michael@walle.cc
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Several architectures have accelerated operations for MMIO
operations writing to a single register, such as writesb, writesw,
writesl, writesq, readsb, readsw, readsl and readsq but regmap
currently cannot use them because we have no hooks for providing
an accelerated noinc back-end for MMIO.
Solve this by providing reg_[read/write]_noinc callbacks for
the bus abstraction, so that the regmap-mmio bus can use this.
Currently I do not see a need to support this for custom regmaps
so it is only added to the bus.
Callbacks are passed a void * with the array of values and a
count which is the number of items of the byte chunk size for
the specific register width.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20220816204832.265837-1-linus.walleij@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Some users may use regmap MMIO for IO ports, and this can be done
by assigning ioreadXX()/iowriteXX() and their Big Endian counterparts
to the regmap context.
Add IO port support with a corresponding flag added.
While doing that, make sure that user won't select relaxed MMIO access
along with IO port because the latter have no relaxed variants.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: William Breathitt Gray <william.gray@linaro.org>
Link: https://lore.kernel.org/r/20220808203401.35153-4-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This flag is a bit of a hack and the same thing can be accomplished
using a custom ->get_irq_reg() callback. Add a warning to catch any
use of the flag.
Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com>
Link: https://lore.kernel.org/r/20220623211420.918875-13-aidanmacdonald.0x0@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Replace the internal sub_irq_reg() function with a public callback
that drivers can use when they have more complex register layouts.
The default implementation is regmap_irq_get_irq_reg_linear(), used
if the chip doesn't provide its own callback.
Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com>
Link: https://lore.kernel.org/r/20220623211420.918875-12-aidanmacdonald.0x0@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
To me "unmask" suggests that we write 1s to the register when
an interrupt is enabled. This also makes sense because it's the
opposite of what the "mask" register does (write 1s to disable
an interrupt).
But regmap-irq does the opposite: for a disabled interrupt, it
writes 1s to "unmask" and 0s to "mask". This is surprising and
deviates from the usual way mask registers are handled.
Additionally, mask_invert didn't interact with unmask registers
properly -- it caused them to be ignored entirely.
Fix this by making mask and unmask registers orthogonal, using
the following behavior:
* Mask registers are written with 1s for disabled interrupts.
* Unmask registers are written with 1s for enabled interrupts.
This behavior supports both normal or inverted mask registers
and separate set/clear registers via different combinations of
mask_base/unmask_base.
The old unmask register behavior is deprecated. Drivers need to
opt-in to the new behavior by setting mask_unmask_non_inverted.
Warnings are issued if the driver relies on deprecated behavior.
Chips that only set one of mask_base/unmask_base don't have to
use the mask_unmask_non_inverted flag because that use case was
previously not supported.
The mask_invert flag is also deprecated in favor of describing
inverted mask registers as unmask registers.
Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com>
Link: https://lore.kernel.org/r/20220623211420.918875-11-aidanmacdonald.0x0@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
