| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- "powerpc/64s: do not re-activate batched TLB flush" makes
arch_{enter|leave}_lazy_mmu_mode() nest properly (Alexander Gordeev)
It adds a generic enter/leave layer and switches architectures to use
it. Various hacks were removed in the process.
- "zram: introduce compressed data writeback" implements data
compression for zram writeback (Richard Chang and Sergey Senozhatsky)
- "mm: folio_zero_user: clear page ranges" adds clearing of contiguous
page ranges for hugepages. Large improvements during demand faulting
are demonstrated (David Hildenbrand)
- "memcg cleanups" tidies up some memcg code (Chen Ridong)
- "mm/damon: introduce {,max_}nr_snapshots and tracepoint for damos
stats" improves DAMOS stat's provided information, deterministic
control, and readability (SeongJae Park)
- "selftests/mm: hugetlb cgroup charging: robustness fixes" fixes a few
issues in the hugetlb cgroup charging selftests (Li Wang)
- "Fix va_high_addr_switch.sh test failure - again" addresses several
issues in the va_high_addr_switch test (Chunyu Hu)
- "mm/damon/tests/core-kunit: extend existing test scenarios" improves
the KUnit test coverage for DAMON (Shu Anzai)
- "mm/khugepaged: fix dirty page handling for MADV_COLLAPSE" fixes a
glitch in khugepaged which was causing madvise(MADV_COLLAPSE) to
transiently return -EAGAIN (Shivank Garg)
- "arch, mm: consolidate hugetlb early reservation" reworks and
consolidates a pile of straggly code related to reservation of
hugetlb memory from bootmem and creation of CMA areas for hugetlb
(Mike Rapoport)
- "mm: clean up anon_vma implementation" cleans up the anon_vma
implementation in various ways (Lorenzo Stoakes)
- "tweaks for __alloc_pages_slowpath()" does a little streamlining of
the page allocator's slowpath code (Vlastimil Babka)
- "memcg: separate private and public ID namespaces" cleans up the
memcg ID code and prevents the internal-only private IDs from being
exposed to userspace (Shakeel Butt)
- "mm: hugetlb: allocate frozen gigantic folio" cleans up the
allocation of frozen folios and avoids some atomic refcount
operations (Kefeng Wang)
- "mm/damon: advance DAMOS-based LRU sorting" improves DAMOS's movement
of memory betewwn the active and inactive LRUs and adds auto-tuning
of the ratio-based quotas and of monitoring intervals (SeongJae Park)
- "Support page table check on PowerPC" makes
CONFIG_PAGE_TABLE_CHECK_ENFORCED work on powerpc (Andrew Donnellan)
- "nodemask: align nodes_and{,not} with underlying bitmap ops" makes
nodes_and() and nodes_andnot() propagate the return values from the
underlying bit operations, enabling some cleanup in calling code
(Yury Norov)
- "mm/damon: hide kdamond and kdamond_lock from API callers" cleans up
some DAMON internal interfaces (SeongJae Park)
- "mm/khugepaged: cleanups and scan limit fix" does some cleanup work
in khupaged and fixes a scan limit accounting issue (Shivank Garg)
- "mm: balloon infrastructure cleanups" goes to town on the balloon
infrastructure and its page migration function. Mainly cleanups, also
some locking simplification (David Hildenbrand)
- "mm/vmscan: add tracepoint and reason for kswapd_failures reset" adds
additional tracepoints to the page reclaim code (Jiayuan Chen)
- "Replace wq users and add WQ_PERCPU to alloc_workqueue() users" is
part of Marco's kernel-wide migration from the legacy workqueue APIs
over to the preferred unbound workqueues (Marco Crivellari)
- "Various mm kselftests improvements/fixes" provides various unrelated
improvements/fixes for the mm kselftests (Kevin Brodsky)
- "mm: accelerate gigantic folio allocation" greatly speeds up gigantic
folio allocation, mainly by avoiding unnecessary work in
pfn_range_valid_contig() (Kefeng Wang)
- "selftests/damon: improve leak detection and wss estimation
reliability" improves the reliability of two of the DAMON selftests
(SeongJae Park)
- "mm/damon: cleanup kdamond, damon_call(), damos filter and
DAMON_MIN_REGION" does some cleanup work in the core DAMON code
(SeongJae Park)
- "Docs/mm/damon: update intro, modules, maintainer profile, and misc"
performs maintenance work on the DAMON documentation (SeongJae Park)
- "mm: add and use vma_assert_stabilised() helper" refactors and cleans
up the core VMA code. The main aim here is to be able to use the mmap
write lock's lockdep state to perform various assertions regarding
the locking which the VMA code requires (Lorenzo Stoakes)
- "mm, swap: swap table phase II: unify swapin use" removes some old
swap code (swap cache bypassing and swap synchronization) which
wasn't working very well. Various other cleanups and simplifications
were made. The end result is a 20% speedup in one benchmark (Kairui
Song)
- "enable PT_RECLAIM on more 64-bit architectures" makes PT_RECLAIM
available on 64-bit alpha, loongarch, mips, parisc, and um. Various
cleanups were performed along the way (Qi Zheng)
* tag 'mm-stable-2026-02-11-19-22' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (325 commits)
mm/memory: handle non-split locks correctly in zap_empty_pte_table()
mm: move pte table reclaim code to memory.c
mm: make PT_RECLAIM depends on MMU_GATHER_RCU_TABLE_FREE
mm: convert __HAVE_ARCH_TLB_REMOVE_TABLE to CONFIG_HAVE_ARCH_TLB_REMOVE_TABLE config
um: mm: enable MMU_GATHER_RCU_TABLE_FREE
parisc: mm: enable MMU_GATHER_RCU_TABLE_FREE
mips: mm: enable MMU_GATHER_RCU_TABLE_FREE
LoongArch: mm: enable MMU_GATHER_RCU_TABLE_FREE
alpha: mm: enable MMU_GATHER_RCU_TABLE_FREE
mm: change mm/pt_reclaim.c to use asm/tlb.h instead of asm-generic/tlb.h
mm/damon/stat: remove __read_mostly from memory_idle_ms_percentiles
zsmalloc: make common caches global
mm: add SPDX id lines to some mm source files
mm/zswap: use %pe to print error pointers
mm/vmscan: use %pe to print error pointers
mm/readahead: fix typo in comment
mm: khugepaged: fix NR_FILE_PAGES and NR_SHMEM in collapse_file()
mm: refactor vma_map_pages to use vm_insert_pages
mm/damon: unify address range representation with damon_addr_range
mm/cma: replace snprintf with strscpy in cma_new_area
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 updates from Ted Ts'o:
"New features and improvements for the ext4 file system
- Avoid unnecessary cache invalidation in the extent status cache
(es_cache) when adding extents to be cached in the es_cache and we
are not changing the extent tree
- Add a sysfs parameter, err_report_sec, to control how frequently to
log a warning message that file system inconsistency has been
detected (Previously we logged the warning message every 24 hours)
- Avoid unnecessary forced ordered writes when appending to a file
when delayed allocation is enabled
- Defer splitting unwritten extents to I/O completion to improve
write performance of concurrent direct I/O writes to multiple files
- Refactor and add kunit tests to the extent splitting and conversion
code paths
Various Bug Fixes:
- Fix a panic when the debugging DOUBLE_CHECK macro is defined
- Avoid using fast commit for rare and complex file system operations
to make fast commit easier to reason about. This can also avoid
some corner cases that could result in file system inconsistency if
there is a crash between the fast commit before a subsequent full
commit
- Fix memory leaks in error paths
- Fix a false positive reports caused when running stress tests using
mixed huge-page workloads caused by a race between page migration
and bitmap updates
- Fix a potential recursion into file system reclaim when evicting an
inode when fast commit is enabled
- Fix a warning caused by a potential double decrement to the dirty
clusters counter when executing FS_IOC_SHUTDOWN when running a
stress test
- Enable mballoc optimized scanning regardless whether the inode is
using indirect blocks or extent trees to map blocks"
* tag 'ext4_for_linus-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (45 commits)
et4: allow zeroout when doing written to unwritten split
ext4: refactor split and convert extents
ext4: refactor zeroout path and handle all cases
ext4: propagate flags to ext4_convert_unwritten_extents_endio()
ext4: propagate flags to convert_initialized_extent()
ext4: add extent status cache support to kunit tests
ext4: kunit tests for higher level extent manipulation functions
ext4: kunit tests for extent splitting and conversion
ext4: use optimized mballoc scanning regardless of inode format
ext4: always allocate blocks only from groups inode can use
ext4: fix dirtyclusters double decrement on fs shutdown
ext4: fast commit: make s_fc_lock reclaim-safe
ext4: fix e4b bitmap inconsistency reports
ext4: remove redundant NULL check after __GFP_NOFAIL
ext4: remove EXT4_GET_BLOCKS_IO_CREATE_EXT
ext4: simplify the mapping query logic in ext4_iomap_begin()
ext4: remove unused unwritten parameter in ext4_dio_write_iter()
ext4: remove useless ext4_iomap_overwrite_ops
ext4: avoid starting handle when dio writing an unwritten extent
ext4: don't split extent before submitting I/O
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"Core & protocols:
- A significant effort all around the stack to guide the compiler to
make the right choice when inlining code, to avoid unneeded calls
for small helper and stack canary overhead in the fast-path.
This generates better and faster code with very small or no text
size increases, as in many cases the call generated more code than
the actual inlined helper.
- Extend AccECN implementation so that is now functionally complete,
also allow the user-space enabling it on a per network namespace
basis.
- Add support for memory providers with large (above 4K) rx buffer.
Paired with hw-gro, larger rx buffer sizes reduce the number of
buffers traversing the stack, dincreasing single stream CPU usage
by up to ~30%.
- Do not add HBH header to Big TCP GSO packets. This simplifies the
RX path, the TX path and the NIC drivers, and is possible because
user-space taps can now interpret correctly such packets without
the HBH hint.
- Allow IPv6 routes to be configured with a gateway address that is
resolved out of a different interface than the one specified,
aligning IPv6 to IPv4 behavior.
- Multi-queue aware sch_cake. This makes it possible to scale the
rate shaper of sch_cake across multiple CPUs, while still enforcing
a single global rate on the interface.
- Add support for the nbcon (new buffer console) infrastructure to
netconsole, enabling lock-free, priority-based console operations
that are safer in crash scenarios.
- Improve the TCP ipv6 output path to cache the flow information,
saving cpu cycles, reducing cache line misses and stack use.
- Improve netfilter packet tracker to resolve clashes for most
protocols, avoiding unneeded drops on rare occasions.
- Add IP6IP6 tunneling acceleration to the flowtable infrastructure.
- Reduce tcp socket size by one cache line.
- Notify neighbour changes atomically, avoiding inconsistencies
between the notification sequence and the actual states sequence.
- Add vsock namespace support, allowing complete isolation of vsocks
across different network namespaces.
- Improve xsk generic performances with cache-alignment-oriented
optimizations.
- Support netconsole automatic target recovery, allowing netconsole
to reestablish targets when underlying low-level interface comes
back online.
Driver API:
- Support for switching the working mode (automatic vs manual) of a
DPLL device via netlink.
- Introduce PHY ports representation to expose multiple front-facing
media ports over a single MAC.
- Introduce "rx-polarity" and "tx-polarity" device tree properties,
to generalize polarity inversion requirements for differential
signaling.
- Add helper to create, prepare and enable managed clocks.
Device drivers:
- Add Huawei hinic3 PF etherner driver.
- Add DWMAC glue driver for Motorcomm YT6801 PCIe ethernet
controller.
- Add ethernet driver for MaxLinear MxL862xx switches
- Remove parallel-port Ethernet driver.
- Convert existing driver timestamp configuration reporting to
hwtstamp_get and remove legacy ioctl().
- Convert existing drivers to .get_rx_ring_count(), simplifing the RX
ring count retrieval. Also remove the legacy fallback path.
- Ethernet high-speed NICs:
- Broadcom (bnxt, bng):
- bnxt: add FW interface update to support FEC stats histogram
and NVRAM defragmentation
- bng: add TSO and H/W GRO support
- nVidia/Mellanox (mlx5):
- improve latency of channel restart operations, reducing the
used H/W resources
- add TSO support for UDP over GRE over VLAN
- add flow counters support for hardware steering (HWS) rules
- use a static memory area to store headers for H/W GRO,
leading to 12% RX tput improvement
- Intel (100G, ice, idpf):
- ice: reorganizes layout of Tx and Rx rings for cacheline
locality and utilizes __cacheline_group* macros on the new
layouts
- ice: introduces Synchronous Ethernet (SyncE) support
- Meta (fbnic):
- adds debugfs for firmware mailbox and tx/rx rings vectors
- Ethernet virtual:
- geneve: introduce GRO/GSO support for double UDP encapsulation
- Ethernet NICs consumer, and embedded:
- Synopsys (stmmac):
- some code refactoring and cleanups
- RealTek (r8169):
- add support for RTL8127ATF (10G Fiber SFP)
- add dash and LTR support
- Airoha:
- AN8811HB 2.5 Gbps phy support
- Freescale (fec):
- add XDP zero-copy support
- Thunderbolt:
- add get link setting support to allow bonding
- Renesas:
- add support for RZ/G3L GBETH SoC
- Ethernet switches:
- Maxlinear:
- support R(G)MII slow rate configuration
- add support for Intel GSW150
- Motorcomm (yt921x):
- add DCB/QoS support
- TI:
- icssm-prueth: support bridging (STP/RSTP) via the switchdev
framework
- Ethernet PHYs:
- Realtek:
- enable SGMII and 2500Base-X in-band auto-negotiation
- simplify and reunify C22/C45 drivers
- Micrel: convert bindings to DT schema
- CAN:
- move skb headroom content into skb extensions, making CAN
metadata access more robust
- CAN drivers:
- rcar_canfd:
- add support for FD-only mode
- add support for the RZ/T2H SoC
- sja1000: cleanup the CAN state handling
- WiFi:
- implement EPPKE/802.1X over auth frames support
- split up drop reasons better, removing generic RX_DROP
- additional FTM capabilities: 6 GHz support, supported number of
spatial streams and supported number of LTF repetitions
- better mac80211 iterators to enumerate resources
- initial UHR (Wi-Fi 8) support for cfg80211/mac80211
- WiFi drivers:
- Qualcomm/Atheros:
- ath11k: support for Channel Frequency Response measurement
- ath12k: a significant driver refactor to support multi-wiphy
devices and and pave the way for future device support in the
same driver (rather than splitting to ath13k)
- ath12k: support for the QCC2072 chipset
- Intel:
- iwlwifi: partial Neighbor Awareness Networking (NAN) support
- iwlwifi: initial support for U-NII-9 and IEEE 802.11bn
- RealTek (rtw89):
- preparations for RTL8922DE support
- Bluetooth:
- implement setsockopt(BT_PHY) to set the connection packet type/PHY
- set link_policy on incoming ACL connections
- Bluetooth drivers:
- btusb: add support for MediaTek7920, Realtek RTL8761BU and 8851BE
- btqca: add WCN6855 firmware priority selection feature"
* tag 'net-next-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1254 commits)
bnge/bng_re: Add a new HSI
net: macb: Fix tx/rx malfunction after phy link down and up
af_unix: Fix memleak of newsk in unix_stream_connect().
net: ti: icssg-prueth: Add optional dependency on HSR
net: dsa: add basic initial driver for MxL862xx switches
net: mdio: add unlocked mdiodev C45 bus accessors
net: dsa: add tag format for MxL862xx switches
dt-bindings: net: dsa: add MaxLinear MxL862xx
selftests: drivers: net: hw: Modify toeplitz.c to poll for packets
octeontx2-pf: Unregister devlink on probe failure
net: renesas: rswitch: fix forwarding offload statemachine
ionic: Rate limit unknown xcvr type messages
tcp: inet6_csk_xmit() optimization
tcp: populate inet->cork.fl.u.ip6 in tcp_v6_syn_recv_sock()
tcp: populate inet->cork.fl.u.ip6 in tcp_v6_connect()
ipv6: inet6_csk_xmit() and inet6_csk_update_pmtu() use inet->cork.fl.u.ip6
ipv6: use inet->cork.fl.u.ip6 and np->final in ip6_datagram_dst_update()
ipv6: use np->final in inet6_sk_rebuild_header()
ipv6: add daddr/final storage in struct ipv6_pinfo
net: stmmac: qcom-ethqos: fix qcom_ethqos_serdes_powerup()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull PCI updates from Bjorn Helgaas:
"Enumeration:
- Don't try to enable Extended Tags on VFs since that bit is Reserved
and causes misleading log messages (Håkon Bugge)
- Initialize Endpoint Read Completion Boundary to match Root Port,
regardless of ACPI _HPX (Håkon Bugge)
- Apply _HPX PCIe Setting Record only to AER configuration, and only
when OS owns PCIe hotplug but not AER, to avoid clobbering Extended
Tag and Relaxed Ordering settings (Håkon Bugge)
Resource management:
- Move CardBus code to setup-cardbus.c and only build it when
CONFIG_CARDBUS is set (Ilpo Järvinen)
- Fix bridge window alignment with optional resources, where
additional alignment requirement was previously lost (Ilpo
Järvinen)
- Stop over-estimating bridge window size since they are now assigned
without any gaps between them (Ilpo Järvinen)
- Increase resource MAX_IORES_LEVEL to avoid /proc/iomem flattening
for nested bridges and endpoints (Ilpo Järvinen)
- Add pbus_mem_size_optional() to handle sizes of optional resources
(SR-IOV VF BARs, expansion ROMs, bridge windows) (Ilpo Järvinen)
- Don't claim disabled bridge windows to avoid spurious claim
failures (Ilpo Järvinen)
Driver binding:
- Fix device reference leak in pcie_port_remove_service() (Uwe
Kleine-König)
- Move pcie_port_bus_match() and pcie_port_bus_type to PCIe-specific
portdrv.c (Uwe Kleine-König)
- Convert portdrv to use pcie_port_bus_type.probe() and .remove()
callbacks so .probe() and .remove() can eventually be removed from
struct device_driver (Uwe Kleine-König)
Error handling:
- Clear stale errors on reporting agents upon probe so they don't
look like recent errors (Lukas Wunner)
- Add generic RAS tracepoint for hotplug events (Shuai Xue)
- Add RAS tracepoint for link speed changes (Shuai Xue)
Power management:
- Avoid redundant delay on transition from D3hot to D3cold if the
device was already in D3hot (Brian Norris)
- Prevent runtime suspend until devices are fully initialized to
avoid saving incompletely configured device state (Brian Norris)
Power control:
- Add power_on/off callbacks with generic signature to pwrseq,
tc9563, and slot drivers so they can be used by pwrctrl core
(Manivannan Sadhasivam)
- Add PCIe M.2 connector support to the slot pwrctrl driver
(Manivannan Sadhasivam)
- Switch to pwrctrl interfaces to create, destroy, and power on/off
devices, calling them from host controller drivers instead of the
PCI core (Manivannan Sadhasivam)
- Drop qcom .assert_perst() callbacks since this is now done by the
controller driver instead of the pwrctrl driver (Manivannan
Sadhasivam)
Virtualization:
- Remove an incorrect unlock in pci_slot_trylock() error handling
(Jinhui Guo)
- Lock the bridge device for slot reset (Keith Busch)
- Enable ACS after IOMMU configuration on OF platforms so ACS is
enabled an all devices; previously the first device enumerated
(typically a Root Port) didn't have ACS enabled (Manivannan
Sadhasivam)
- Disable ACS Source Validation for IDT 0x80b5 and 0x8090 switches to
work around hardware erratum; previously ACS SV was only
temporarily disabled, which worked for enumeration but not after
reset (Manivannan Sadhasivam)
Peer-to-peer DMA:
- Release per-CPU pgmap ref when vm_insert_page() fails to avoid hang
when removing the PCI device (Hou Tao)
- Remove incorrect p2pmem_alloc_mmap() warning about page refcount
(Hou Tao)
Endpoint framework:
- Add configfs sub-groups synchronously to avoid NULL pointer
dereference when racing with removal (Liu Song)
- Fix swapped parameters in pci_{primary/secondary}_epc_epf_unlink()
functions (Manikanta Maddireddy)
ASPEED PCIe controller driver:
- Add ASPEED Root Complex DT binding and driver (Jacky Chou)
Freescale i.MX6 PCIe controller driver:
- Add DT binding and driver support for an optional external refclock
in addition to the refclock from the internal PLL (Richard Zhu)
- Fix CLKREQ# control so host asserts it during enumeration and
Endpoints can use it afterwards to exit the L1.2 link state
(Richard Zhu)
NVIDIA Tegra PCIe controller driver:
- Export irq_domain_free_irqs() to allow PCI/MSI drivers that tear
down MSI domains to be built as modules (Aaron Kling)
- Allow pci-tegra to be built as a module (Aaron Kling)
NVIDIA Tegra194 PCIe controller driver:
- Relax Kconfig so tegra194 can be built for platforms beyond
Tegra194 (Vidya Sagar)
Qualcomm PCIe controller driver:
- Merge SC8180x DT binding into SM8150 (Krzysztof Kozlowski)
- Move SDX55, SDM845, QCS404, IPQ5018, IPQ6018, IPQ8074 Gen3,
IPQ8074, IPQ4019, IPQ9574, APQ8064, MSM8996, APQ8084 to dedicated
schema (Krzysztof Kozlowski)
- Add DT binding and driver support for SA8255p Endpoint being
configured by firmware (Mrinmay Sarkar)
- Parse PERST# from all PCIe bridge nodes for future platforms that
will have PERST# in Switch Downstream Ports as well as in Root
Ports (Manivannan Sadhasivam)
Renesas RZ/G3S PCIe controller driver:
- Use pci_generic_config_write() since the writability provided by
the custom wrapper is unnecessary (Claudiu Beznea)
SOPHGO PCIe controller driver:
- Disable ASPM L0s and L1 on Sophgo 2044 PCIe Root Ports (Inochi
Amaoto)
Synopsys DesignWare PCIe controller driver:
- Extend PCI_FIND_NEXT_CAP() and PCI_FIND_NEXT_EXT_CAP() to return a
pointer to the preceding Capability, to allow removal of
Capabilities that are advertised but not fully implemented (Qiang
Yu)
- Remove MSI and MSI-X Capabilities in platforms that can't support
them, so the PCI core automatically falls back to INTx (Qiang Yu)
- Add ASPM L1.1 and L1.2 Substates context to debugfs ltssm_status
for drivers that support this (Shawn Lin)
- Skip PME_Turn_Off broadcast and L2/L3 transition during suspend if
link is not up to avoid an unnecessary timeout (Manivannan
Sadhasivam)
- Revert dw-rockchip, qcom, and DWC core changes that used link-up
IRQs to trigger enumeration instead of waiting for link to be up
because the PCI core doesn't allocate bus number space for
hierarchies that might be attached (Niklas Cassel)
- Make endpoint iATU entry for MSI permanent instead of programming
it dynamically, which is slow and racy with respect to other
concurrent traffic, e.g., eDMA (Koichiro Den)
- Use iMSI-RX MSI target address when possible to fix endpoints using
32-bit MSI (Shawn Lin)
- Allow DWC host controller driver probe to continue if device is not
found or found but inactive; only fail when there's an error with
the link (Manivannan Sadhasivam)
- For controllers like NXP i.MX6QP and i.MX7D, where LTSSM registers
are not accessible after PME_Turn_Off, simply wait 10ms instead of
polling for L2/L3 Ready (Richard Zhu)
- Use multiple iATU entries to map large bridge windows and DMA
ranges when necessary instead of failing (Samuel Holland)
- Add EPC dynamic_inbound_mapping feature bit for Endpoint
Controllers that can update BAR inbound address translation without
requiring EPF driver to clear/reset the BAR first, and advertise it
for DWC-based Endpoints (Koichiro Den)
- Add EPC subrange_mapping feature bit for Endpoint Controllers that
can map multiple independent inbound regions in a single BAR,
implement subrange mapping, advertise it for DWC-based Endpoints,
and add Endpoint selftests for it (Koichiro Den)
- Make resizable BARs work for Endpoint multi-PF configurations;
previously it only worked for PF 0 (Aksh Garg)
- Fix Endpoint non-PF 0 support for BAR configuration, ATU mappings,
and Address Match Mode (Aksh Garg)
- Set up iATU when ECAM is enabled; previously IO and MEM outbound
windows weren't programmed, and ECAM-related iATU entries weren't
restored after suspend/resume, so config accesses failed (Krishna
Chaitanya Chundru)
Miscellaneous:
- Use system_percpu_wq and WQ_PERCPU to explicitly request per-CPU
work so WQ_UNBOUND can eventually be removed (Marco Crivellari)"
* tag 'pci-v7.0-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (176 commits)
PCI/bwctrl: Disable BW controller on Intel P45 using a quirk
PCI: Disable ACS SV for IDT 0x8090 switch
PCI: Disable ACS SV for IDT 0x80b5 switch
PCI: Cache ACS Capabilities register
PCI: Enable ACS after configuring IOMMU for OF platforms
PCI: Add ACS quirk for Pericom PI7C9X2G404 switches [12d8:b404]
PCI: Add ACS quirk for Qualcomm Hamoa & Glymur
PCI: Use device_lock_assert() to verify device lock is held
PCI: Use lockdep_assert_held(pci_bus_sem) to verify lock is held
PCI: Fix pci_slot_lock () device locking
PCI: Fix pci_slot_trylock() error handling
PCI: Mark Nvidia GB10 to avoid bus reset
PCI: Mark ASM1164 SATA controller to avoid bus reset
PCI: host-generic: Avoid reporting incorrect 'missing reg property' error
PCI/PME: Replace RMW of Root Status register with direct write
PCI/AER: Clear stale errors on reporting agents upon probe
PCI: Don't claim disabled bridge windows
PCI: rzg3s-host: Fix device node reference leak in rzg3s_pcie_host_parse_port()
PCI: dwc: Fix missing iATU setup when ECAM is enabled
PCI: dwc: Clean up iATU index usage in dw_pcie_iatu_setup()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup updates from Tejun Heo:
- cpuset changes:
- Continue separating v1 and v2 implementations by moving more
v1-specific logic into cpuset-v1.c
- Improve partition handling. Sibling partitions are no longer
invalidated on cpuset.cpus conflict, cpuset.cpus changes no longer
fail in v2, and effective_xcpus computation is made consistent
- Fix partition effective CPUs overlap that caused a warning on
cpuset removal when sibling partitions shared CPUs
- Increase the maximum cgroup subsystem count from 16 to 32 to
accommodate future subsystem additions
- Misc cleanups and selftest improvements including switching to
css_is_online() helper, removing dead code and stale documentation
references, using lockdep_assert_cpuset_lock_held() consistently, and
adding polling helpers for asynchronously updated cgroup statistics
* tag 'cgroup-for-6.20' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: (21 commits)
cpuset: fix overlap of partition effective CPUs
cgroup: increase maximum subsystem count from 16 to 32
cgroup: Remove stale cpu.rt.max reference from documentation
cpuset: replace direct lockdep_assert_held() with lockdep_assert_cpuset_lock_held()
cgroup/cpuset: Move the v1 empty cpus/mems check to cpuset1_validate_change()
cgroup/cpuset: Don't invalidate sibling partitions on cpuset.cpus conflict
cgroup/cpuset: Don't fail cpuset.cpus change in v2
cgroup/cpuset: Consistently compute effective_xcpus in update_cpumasks_hier()
cgroup/cpuset: Streamline rm_siblings_excl_cpus()
cpuset: remove dead code in cpuset-v1.c
cpuset: remove v1-specific code from generate_sched_domains
cpuset: separate generate_sched_domains for v1 and v2
cpuset: move update_domain_attr_tree to cpuset_v1.c
cpuset: add cpuset1_init helper for v1 initialization
cpuset: add cpuset1_online_css helper for v1-specific operations
cpuset: add lockdep_assert_cpuset_lock_held helper
cpuset: Remove unnecessary checks in rebuild_sched_domains_locked
cgroup: switch to css_is_online() helper
selftests: cgroup: Replace sleep with cg_read_key_long_poll() for waiting on nr_dying_descendants
selftests: cgroup: make test_memcg_sock robust against delayed sock stats
...
|
|
Pull drm updates from Dave Airlie:
"Highlights:
- amdgpu support for lots of new IP blocks which means newer GPUs
- xe has a lot of SR-IOV and SVM improvements
- lots of intel display refactoring across i915/xe
- msm has more support for gen8 platforms
- Given up on kgdb/kms integration, it's too hard on modern hw
core:
- drop kgdb support
- replace system workqueue with percpu
- account for property blobs in memcg
- MAINTAINERS updates for xe + buddy
rust:
- Fix documentation for Registration constructors
- Use pin_init::zeroed() for fops initialization
- Annotate DRM helpers with __rust_helper
- Improve safety documentation for gem::Object::new()
- Update AlwaysRefCounted imports
- mm: Prevent integer overflow in page_align()
atomic:
- add drm_device pointer to drm_private_obj
- introduce gamma/degamma LUT size check
buddy:
- fix free_trees memory leak
- prevent BUG_ON
bridge:
- introduce drm_bridge_unplug/enter/exit
- add connector argument to .hpd_notify
- lots of recounting conversions
- convert rockchip inno hdmi to bridge
- lontium-lt9611uxc: switch to HDMI audio helpers
- dw-hdmi-qp: add support for HPD-less setups
- Algoltek AG6311 support
panels:
- edp: CSW MNE007QB3-1, AUO B140HAN06.4, AUO B140QAX01.H
- st75751: add SPI support
- Sitronix ST7920, Samsung LTL106HL02
- LG LH546WF1-ED01, HannStar HSD156J
- BOE NV130WUM-T08
- Innolux G150XGE-L05
- Anbernic RG-DS
dma-buf:
- improve sg_table debugging
- add tracepoints
- call clear_page instead of memset
- start to introduce cgroup memory accounting in heaps
- remove sysfs stats
dma-fence:
- add new helpers
dp:
- mst: avoid oob access with vcpi=0
hdmi:
- limit infoframes exposure to userspace
gem:
- reduce page table overhead with THP
- fix leak in drm_gem_get_unmapped_area
gpuvm:
- API sanitation for rust bindings
sched:
- introduce new helpers
panic:
- report invalid panic modes
- add kunit tests
i915/xe display:
- Expose sharpness only if num_scalers is >= 2
- Add initial Xe3P_LPD for NVL
- BMG FBC support
- Add MTL+ platforms to support dpll framework
_ fix DIMM_S DRM decoding on ICL
- Return to using AUX interrupts
- PSR/Panel replay refactoring
- use consolidation HDMI tables
- Xe3_LPD CD2X dividier changes
xe:
- vfio: add vfio_pci for intel GPU
- multi queue support
- dynamic pagemaps and multi-device SVM
- expose temp attribs in hwmon
- NO_COMPRESSION bo flag
- expose MERT OA unit
- sysfs survivability refactor
- SRIOV PF: add MERT support
- enable SR-IOV VF migration
- Enable I2C/NVM on Crescent Island
- Xe3p page reclaimation support
- introduce SRIOV scheduler groups
- add SoC remappt support in system controller
- insert compiler barriers in GuC code
- define NVL GuC firmware
- handle GT resume failure
- fix drm scheduler layering violations
- enable GSC loading and PXP for PTL
- disable GuC Power DCC strategy on PTL
- unregister drm device on probe error
i915:
- move to kernel standard fault injection
- bump recommended GuC version for DG2 and MTL
amdgpu:
- SMUIO 15.x, PSP 15.x support
- IH 6.1.1/7.1 support
- MMHUB 3.4/4.2 support
- GC 11.5.4/12.1 support
- SDMA 6.1.4/7.1/7.11.4 support
- JPEG 5.3 support
- UserQ updates
- GC 9 gfx queue reset support
- TTM memory ops parallelization
- convert legacy logging to new helpers
- DC analog fixes
amdkfd:
- GC 11.5.4/12.1 suppport
- SDMA 6.1.4/7.1 support
- per context support
- increase kfd process hash table
- Reserved SDMA rework
radeon:
- convert legacy logging to new helpers
- use devm for i2c adapters
msm:
- GPU
- Document a612/RGMU dt bindings
- UBWC 6.0 support (for A840 / Kaanapali)
- a225 support
- DPU:
- Switch to use virtual planes by default
- Fix DSI CMD panels on DPU 3.x
- Rewrite format handling to remove intermediate representation
- Fix watchdog on DPU 8.x+
- Fix TE / Vsync source setting on DPU 8.x+
- Add 3D_Mux on SC7280
- Kaanapali platform support
- Fix UBWC register programming
- Make RM reserve DSPP-enabled mixers for CRTCs with LMs
- Gamma correction support
- DP:
- Enable support for eDP 1.4+ link rate tables
- Fix MDSS1 DP indices on SA8775P, making them to work
- Fix msm_dp_ctrl_config_msa() to work with LLVM 20
- DSI:
- Document QCS8300 as compatible with SA8775P
- Kaanapali platform support
- DSI PHY:
- switch to divider_determine_rate()
- MDP5:
- Drop support for MSM8998, SDM660 and SDM630 (switch over to DPU)
- MDSS:
- Kaanapali platform support
- Fixed UBWC register programming
nova-core:
- Prepare for Turing support. This includes parsing and handling
Turing-specific firmware headers and sections as well as a Turing
Falcon HAL implementation
- Get rid of the Result<impl PinInit<T, E>> anti-pattern
- Relocate initializer-specific code into the appropriate initializer
- Use CStr::from_bytes_until_nul() to remove custom helpers
- Improve handling of unexpected firmware values
- Clean up redundant debug prints
- Replace c_str!() with native Rust C-string literals
- Update nova-core task list
nova:
- Align GEM object size to system page size
tyr:
- Use generated uAPI bindings for GpuInfo
- Replace manual sleeps with read_poll_timeout()
- Replace c_str!() with native Rust C-string literals
- Suppress warnings for unread fields
- Fix incorrect register name in print statement
nouveau:
- fix big page table support races in PTE management
- improve reclocking on tegra 186+
amdxdna:
- fix suspend race conditions
- improve handling of zero tail pointers
- fix cu_idx overwritten during command setup
- enable hardware context priority
- remove NPU2 support
- update message buffer allocation requirements
- update firmware version check
ast:
- support imported cursor buffers
- big endian fixes
etnaviv:
- add PPU flop reset support
imagination:
- add AM62P support
- introduce hw version checks
ivpu:
- implement warm boot flow
panfrost:
- add bo sync ioctl
- add GPU_PM_RT support for RZ/G3E SoC
panthor:
- add bo sync ioctl
- enable timestamp propagation
- scheduler robustness improvements
- VM termination fixes
- huge page support
rockchip:
- RK3368 HDMI Support
- get rid of atomic_check fixups
- RK3506 support
- RK3576/RK3588 improved HPD handling
rz-du:
- RZ/V2H(P) MIPI-DSI Support
v3d:
- fix DMA segment size
- convert to new logging helpers
mediatek:
- move DP training to hotplug thread
- convert logging to new helpers
- add support for HS speed DSI
- Genio 510/700/1200-EVK, Radxa NIO-12L HDMI support
atmel-hlcdc:
- switch to drmm resource
- support nomodeset
- use newer helpers
hisilicon:
- fix various DP bugs
renesas:
- fix kernel panic on reboot
exynos:
- fix vidi_connection_ioctl using wrong device
- fix vidi_connection deref user ptr
- fix concurrency regression with vidi_context
vkms:
- add configfs support for display configuration
* tag 'drm-next-2026-02-11' of https://gitlab.freedesktop.org/drm/kernel: (1610 commits)
drm/xe/pm: Disable D3Cold for BMG only on specific platforms
drm/xe: Fix kerneldoc for xe_tlb_inval_job_alloc_dep
drm/xe: Fix kerneldoc for xe_gt_tlb_inval_init_early
drm/xe: Fix kerneldoc for xe_migrate_exec_queue
drm/xe/query: Fix topology query pointer advance
drm/xe/guc: Fix kernel-doc warning in GuC scheduler ABI header
drm/xe/guc: Fix CFI violation in debugfs access.
accel/amdxdna: Move RPM resume into job run function
accel/amdxdna: Fix incorrect DPM level after suspend/resume
nouveau/vmm: start tracking if the LPT PTE is valid. (v6)
nouveau/vmm: increase size of vmm pte tracker struct to u32 (v2)
nouveau/vmm: rewrite pte tracker using a struct and bitfields.
accel/amdxdna: Fix incorrect error code returned for failed chain command
accel/amdxdna: Remove hardware context status
drm/bridge: imx8qxp-pixel-combiner: Fix bailout for imx8qxp_pc_bridge_probe()
drm/panel: ilitek-ili9882t: Remove duplicate initializers in tianma_il79900a_dsc
drm/i915/display: fix the pixel normalization handling for xe3p_lpd
drm/exynos: vidi: use ctx->lock to protect struct vidi_context member variables related to memory alloc/free
drm/exynos: vidi: fix to avoid directly dereferencing user pointer
drm/exynos: vidi: use priv->vidi_dev for ctx lookup in vidi_connection_ioctl()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs
Pull erofs updates from Gao Xiang:
"In this cycle, inode page cache sharing among filesystems on the same
machine is now supported, which is particularly useful for
high-density hosts running tens of thousands of containers.
In addition, we fully isolate the EROFS core on-disk format from other
optional encoded layouts since the core on-disk part is designed to be
simple, effective, and secure. Users can use the core format to build
unique golden immutable images and import their filesystem trees
directly from raw block devices via DMA, page-mapped DAX devices,
and/or file-backed mounts without having to worry about unnecessary
intrinsic consistency issues found in other generic filesystems by
design. However, the full vision is still working in progress and will
spend more time to achieve final goals.
There are other improvements and bug fixes as usual, as listed below:
- Support inode page cache sharing among filesystems
- Formally separate optional encoded (aka compressed) inode layouts
(and the implementations) from the EROFS core on-disk aligned plain
format for future zero-trust security usage
- Improve performance by caching the fact that an inode does not have
a POSIX ACL
- Improve LZ4 decompression error reporting
- Enable LZMA by default and promote DEFLATE and Zstandard algorithms
out of EXPERIMENTAL status
- Switch to inode_set_cached_link() to cache symlink lengths
- random bugfixes and minor cleanups"
* tag 'erofs-for-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs: (31 commits)
erofs: fix UAF issue for file-backed mounts w/ directio option
erofs: update compression algorithm status
erofs: fix inline data read failure for ztailpacking pclusters
erofs: avoid some unnecessary #ifdefs
erofs: handle end of filesystem properly for file-backed mounts
erofs: separate plain and compressed filesystems formally
erofs: use inode_set_cached_link()
erofs: mark inodes without acls in erofs_read_inode()
erofs: implement .fadvise for page cache share
erofs: support compressed inodes for page cache share
erofs: support unencoded inodes for page cache share
erofs: pass inode to trace_erofs_read_folio
erofs: introduce the page cache share feature
erofs: using domain_id in the safer way
erofs: add erofs_inode_set_aops helper to set the aops
erofs: support user-defined fingerprint name
erofs: decouple `struct erofs_anon_fs_type`
fs: Export alloc_empty_backing_file
erofs: tidy up erofs_init_inode_xattrs()
erofs: add missing documentation about `directio` mount option
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs timestamp updates from Christian Brauner:
"This contains the changes to support non-blocking timestamp updates.
Since commit 66fa3cedf16a ("fs: Add async write file modification
handling") file_update_time_flags() unconditionally returns -EAGAIN
when any timestamp needs updating and IOCB_NOWAIT is set. This makes
non-blocking direct writes impossible on file systems with granular
enough timestamps, which in practice means all of them.
This reworks the timestamp update path to propagate IOCB_NOWAIT
through ->update_time so that file systems which can update timestamps
without blocking are no longer penalized.
With that groundwork in place, the core change passes IOCB_NOWAIT into
->update_time and returns -EAGAIN only when the file system indicates
it would block.
XFS implements non-blocking timestamp updates by using the new
->sync_lazytime and open-coding generic_update_time without the
S_NOWAIT check, since the lazytime path through the generic helpers
can never block in XFS"
* tag 'vfs-7.0-rc1.nonblocking_timestamps' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
xfs: enable non-blocking timestamp updates
xfs: implement ->sync_lazytime
fs: refactor file_update_time_flags
fs: add support for non-blocking timestamp updates
fs: add a ->sync_lazytime method
fs: factor out a sync_lazytime helper
fs: refactor ->update_time handling
fat: cleanup the flags for fat_truncate_time
nfs: split nfs_update_timestamps
fs: allow error returns from generic_update_time
fs: remove inode_update_time
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux
Pull dma-mapping fixes from Marek Szyprowski:
"Two minor fixes for the DMA-mapping subsystem:
- check for the rare case of the allocation failure of the global CMA
pool (Shanker Donthineni)
- avoid perf buffer overflow when tracing large scatter-gather lists
(Deepanshu Kartikey)"
* tag 'dma-mapping-6.19-2026-02-06' of git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux:
dma: contiguous: Check return value of dma_contiguous_reserve_area()
tracing/dma: Cap dma_map_sg tracepoint arrays to prevent buffer overflow
|
|
Similar to tcp, provide a new tracepoint to better understand
mptcp_rcv_space_adjust() behavior, which presents many artifacts.
Note that the used format string is so long that I preferred
wrap it, contrary to guidance for quoted strings.
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260203-net-next-mptcp-misc-feat-6-20-v1-4-31ec8bfc56d1@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The dma_map_sg tracepoint can trigger a perf buffer overflow when
tracing large scatter-gather lists. With devices like virtio-gpu
creating large DRM buffers, nents can exceed 1000 entries, resulting
in:
phys_addrs: 1000 * 8 bytes = 8,000 bytes
dma_addrs: 1000 * 8 bytes = 8,000 bytes
lengths: 1000 * 4 bytes = 4,000 bytes
Total: ~20,000 bytes
This exceeds PERF_MAX_TRACE_SIZE (8192 bytes), causing:
WARNING: CPU: 0 PID: 5497 at kernel/trace/trace_event_perf.c:405
perf buffer not large enough, wanted 24620, have 8192
Cap all three dynamic arrays at 128 entries using min() in the array
size calculation. This ensures arrays are only as large as needed
(up to the cap), avoiding unnecessary memory allocation for small
operations while preventing overflow for large ones.
The tracepoint now records the full nents/ents counts and a truncated
flag so users can see when data has been capped.
Changes in v2:
- Use min(nents, DMA_TRACE_MAX_ENTRIES) for dynamic array sizing
instead of fixed DMA_TRACE_MAX_ENTRIES allocation (feedback from
Steven Rostedt)
- This allocates only what's needed up to the cap, avoiding waste
for small operations
Reported-by: syzbot+28cea38c382fd15e751a@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=28cea38c382fd15e751a
Tested-by: syzbot+28cea38c382fd15e751a@syzkaller.appspotmail.com
Signed-off-by: Deepanshu Kartikey <Kartikey406@gmail.com>
Reviwed-by: Sean Anderson <sean.anderson@linux.dev>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20260130155215.69737-1-kartikey406@gmail.com
|
|
The current cgroup subsystem limit of 16 is insufficient, as the number of
existing subsystems has already reached this limit. When adding a new
subsystem that is not yet in the mainline kernel, building with
`make allmodconfig` requires first bypassing the
`BUILD_BUG_ON(CGROUP_SUBSYS_COUNT > 16)` restriction to allow compilation
to succeed. However, the kernel still fails to boot afterward.
This patch increases the maximum number of supported cgroup subsystems from
16 to 32, providing enough room for future subsystem additions.
Signed-off-by: Chen Ridong <chenridong@huawei.com>
Acked-by: Waiman Long <longman@redhat.com>
Tested-by: JP Kobryn <inwardvessel@gmail.com>
Acked-by: JP Kobryn <inwardvessel@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Currently, kswapd_failures is reset in multiple places (kswapd, direct
reclaim, PCP freeing, memory-tiers), but there's no way to trace when and
why it was reset, making it difficult to debug memory reclaim issues.
This patch:
1. Introduce kswapd_clear_hopeless() as a wrapper function to
centralize kswapd_failures reset logic.
2. Introduce kswapd_test_hopeless() to encapsulate hopeless node
checks, replacing all open-coded kswapd_failures comparisons.
3. Add kswapd_clear_hopeless_reason enum to distinguish reset sources:
- KSWAPD_CLEAR_HOPELESS_KSWAPD: reset from kswapd context
- KSWAPD_CLEAR_HOPELESS_DIRECT: reset from direct reclaim
- KSWAPD_CLEAR_HOPELESS_PCP: reset from PCP page freeing
- KSWAPD_CLEAR_HOPELESS_OTHER: reset from other paths
4. Add tracepoints for better observability:
- mm_vmscan_kswapd_clear_hopeless: traces each reset with reason
- mm_vmscan_kswapd_reclaim_fail: traces each kswapd reclaim failure
Test results:
$ trace-cmd record -e vmscan:mm_vmscan_kswapd_clear_hopeless -e vmscan:mm_vmscan_kswapd_reclaim_fail
$ # generate memory pressure
$ trace-cmd report
cpus=4
kswapd0-71 [000] 27.216563: mm_vmscan_kswapd_reclaim_fail: nid=0 failures=1
kswapd0-71 [000] 27.217169: mm_vmscan_kswapd_reclaim_fail: nid=0 failures=2
kswapd0-71 [000] 27.217764: mm_vmscan_kswapd_reclaim_fail: nid=0 failures=3
kswapd0-71 [000] 27.218353: mm_vmscan_kswapd_reclaim_fail: nid=0 failures=4
kswapd0-71 [000] 27.218993: mm_vmscan_kswapd_reclaim_fail: nid=0 failures=5
kswapd0-71 [000] 27.219744: mm_vmscan_kswapd_reclaim_fail: nid=0 failures=6
kswapd0-71 [000] 27.220488: mm_vmscan_kswapd_reclaim_fail: nid=0 failures=7
kswapd0-71 [000] 27.221206: mm_vmscan_kswapd_reclaim_fail: nid=0 failures=8
kswapd0-71 [000] 27.221806: mm_vmscan_kswapd_reclaim_fail: nid=0 failures=9
kswapd0-71 [000] 27.222634: mm_vmscan_kswapd_reclaim_fail: nid=0 failures=10
kswapd0-71 [000] 27.223286: mm_vmscan_kswapd_reclaim_fail: nid=0 failures=11
kswapd0-71 [000] 27.223894: mm_vmscan_kswapd_reclaim_fail: nid=0 failures=12
kswapd0-71 [000] 27.224712: mm_vmscan_kswapd_reclaim_fail: nid=0 failures=13
kswapd0-71 [000] 27.225424: mm_vmscan_kswapd_reclaim_fail: nid=0 failures=14
kswapd0-71 [000] 27.226082: mm_vmscan_kswapd_reclaim_fail: nid=0 failures=15
kswapd0-71 [000] 27.226810: mm_vmscan_kswapd_reclaim_fail: nid=0 failures=16
kswapd1-72 [002] 27.386869: mm_vmscan_kswapd_reclaim_fail: nid=1 failures=1
kswapd1-72 [002] 27.387435: mm_vmscan_kswapd_reclaim_fail: nid=1 failures=2
kswapd1-72 [002] 27.388016: mm_vmscan_kswapd_reclaim_fail: nid=1 failures=3
kswapd1-72 [002] 27.388586: mm_vmscan_kswapd_reclaim_fail: nid=1 failures=4
kswapd1-72 [002] 27.389155: mm_vmscan_kswapd_reclaim_fail: nid=1 failures=5
kswapd1-72 [002] 27.389723: mm_vmscan_kswapd_reclaim_fail: nid=1 failures=6
kswapd1-72 [002] 27.390292: mm_vmscan_kswapd_reclaim_fail: nid=1 failures=7
kswapd1-72 [002] 27.392364: mm_vmscan_kswapd_reclaim_fail: nid=1 failures=8
kswapd1-72 [002] 27.392934: mm_vmscan_kswapd_reclaim_fail: nid=1 failures=9
kswapd1-72 [002] 27.393504: mm_vmscan_kswapd_reclaim_fail: nid=1 failures=10
kswapd1-72 [002] 27.394073: mm_vmscan_kswapd_reclaim_fail: nid=1 failures=11
kswapd1-72 [002] 27.394899: mm_vmscan_kswapd_reclaim_fail: nid=1 failures=12
kswapd1-72 [002] 27.395472: mm_vmscan_kswapd_reclaim_fail: nid=1 failures=13
kswapd1-72 [002] 27.396055: mm_vmscan_kswapd_reclaim_fail: nid=1 failures=14
kswapd1-72 [002] 27.396628: mm_vmscan_kswapd_reclaim_fail: nid=1 failures=15
kswapd1-72 [002] 27.397199: mm_vmscan_kswapd_reclaim_fail: nid=1 failures=16
kworker/u18:0-40 [002] 27.410151: mm_vmscan_kswapd_clear_hopeless: nid=0 reason=DIRECT
kswapd0-71 [000] 27.439454: mm_vmscan_kswapd_reclaim_fail: nid=0 failures=1
kswapd0-71 [000] 27.440048: mm_vmscan_kswapd_reclaim_fail: nid=0 failures=2
kswapd0-71 [000] 27.440634: mm_vmscan_kswapd_reclaim_fail: nid=0 failures=3
kswapd0-71 [000] 27.441211: mm_vmscan_kswapd_reclaim_fail: nid=0 failures=4
kswapd0-71 [000] 27.441787: mm_vmscan_kswapd_reclaim_fail: nid=0 failures=5
kswapd0-71 [000] 27.442363: mm_vmscan_kswapd_reclaim_fail: nid=0 failures=6
kswapd0-71 [000] 27.443030: mm_vmscan_kswapd_reclaim_fail: nid=0 failures=7
kswapd0-71 [000] 27.443725: mm_vmscan_kswapd_reclaim_fail: nid=0 failures=8
kswapd0-71 [000] 27.444315: mm_vmscan_kswapd_reclaim_fail: nid=0 failures=9
kswapd0-71 [000] 27.444898: mm_vmscan_kswapd_reclaim_fail: nid=0 failures=10
kswapd0-71 [000] 27.445476: mm_vmscan_kswapd_reclaim_fail: nid=0 failures=11
kswapd0-71 [000] 27.446053: mm_vmscan_kswapd_reclaim_fail: nid=0 failures=12
kswapd0-71 [000] 27.446646: mm_vmscan_kswapd_reclaim_fail: nid=0 failures=13
kswapd0-71 [000] 27.447230: mm_vmscan_kswapd_reclaim_fail: nid=0 failures=14
kswapd0-71 [000] 27.447812: mm_vmscan_kswapd_reclaim_fail: nid=0 failures=15
kswapd0-71 [000] 27.448391: mm_vmscan_kswapd_reclaim_fail: nid=0 failures=16
ann-423 [003] 28.028285: mm_vmscan_kswapd_clear_hopeless: nid=0 reason=PCP
Link: https://lkml.kernel.org/r/20260120024402.387576-3-jiayuan.chen@linux.dev
Signed-off-by: Jiayuan Chen <jiayuan.chen@shopee.com>
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Suggested-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org> [tracing]
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Brendan Jackman <jackmanb@google.com>
Cc: David Hildenbrand <david@kernel.org>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: "Masami Hiramatsu (Google)" <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Wei Xu <weixugc@google.com>
Cc: Yuanchu Xie <yuanchu@google.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Linux 6.19-rc7
This is needed for msm and rust trees.
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
Patch series "mm/khugepaged: fix dirty page handling for MADV_COLLAPSE",
v5.
MADV_COLLAPSE on file-backed mappings fails with -EINVAL when TEXT pages
are dirty. This affects scenarios like package/container updates or
executing binaries immediately after writing them, etc.
The issue is that collapse_file() triggers async writeback and returns
SCAN_FAIL (maps to -EINVAL), expecting khugepaged to revisit later. But
MADV_COLLAPSE is synchronous and userspace expects immediate success or
a clear retry signal.
Reproduction:
- Compile or copy 2MB-aligned executable to XFS/ext4 FS
- Call MADV_COLLAPSE on .text section
- First call fails with -EINVAL (text pages dirty from copy)
- Second call succeeds (async writeback completed)
Issue Report:
https://lore.kernel.org/all/4e26fe5e-7374-467c-a333-9dd48f85d7cc@amd.com
This patch (of 2):
When collapse_file encounters dirty or writeback pages in file-backed
mappings, it currently returns SCAN_FAIL which maps to -EINVAL. This is
misleading as EINVAL suggests invalid arguments, whereas dirty/writeback
pages represent transient conditions that may resolve on retry.
Introduce SCAN_PAGE_DIRTY_OR_WRITEBACK to cover both dirty and writeback
states, mapping it to -EAGAIN. For MADV_COLLAPSE, this provides userspace
with a clear signal that retry may succeed after writeback completes. For
khugepaged, this is harmless as it will naturally revisit the range during
periodic scans after async writeback completes.
Link: https://lkml.kernel.org/r/20260118190939.8986-2-shivankg@amd.com
Link: https://lkml.kernel.org/r/20260118190939.8986-4-shivankg@amd.com
Fixes: 34488399fa08 ("mm/madvise: add file and shmem support to MADV_COLLAPSE")
Signed-off-by: Shivank Garg <shivankg@amd.com>
Reported-by: Branden Moore <Branden.Moore@amd.com>
Closes: https://lore.kernel.org/all/4e26fe5e-7374-467c-a333-9dd48f85d7cc@amd.com
Reviewed-by: Dev Jain <dev.jain@arm.com>
Reviewed-by: Lance Yang <lance.yang@linux.dev>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: wang lian <lianux.mm@gmail.com>
Acked-by: David Hildenbrand (Red Hat) <david@kernel.org>
Cc: Barry Song <baohua@kernel.org>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Nico Pache <npache@redhat.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Zach O'Keefe <zokeefe@google.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The trace_erofs_read_folio accesses inode information through folio,
but this method fails if the real inode is not associated with the
folio(such as in the upcoming page cache sharing case). Therefore,
we pass the real inode to it so that the inode information can be
printed out in that case.
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
|
|
Cross-merge networking fixes after downstream PR (net-6.19-rc7).
Conflicts:
drivers/net/ethernet/huawei/hinic3/hinic3_irq.c
b35a6fd37a00 ("hinic3: Add adaptive IRQ coalescing with DIM")
fb2bb2a1ebf7 ("hinic3: Fix netif_queue_set_napi queue_index input parameter error")
https://lore.kernel.org/fc0a7fdf08789a52653e8ad05281a0a849e79206.1768915707.git.zhuyikai1@h-partners.com
drivers/net/wireless/ath/ath12k/mac.c
drivers/net/wireless/ath/ath12k/wifi7/hw.c
31707572108d ("wifi: ath12k: Fix wrong P2P device link id issue")
c26f294fef2a ("wifi: ath12k: Move ieee80211_ops callback to the arch specific module")
https://lore.kernel.org/20260114123751.6a208818@canb.auug.org.au
Adjacent changes:
drivers/net/wireless/ath/ath12k/mac.c
8b8d6ee53dfd ("wifi: ath12k: Fix scan state stuck in ABORTING after cancel_remain_on_channel")
914c890d3b90 ("wifi: ath12k: Add framework for hardware specific ieee80211_ops registration")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-next
drm-misc-next for 6.20:
Core Changes:
- buddy: Fix free_trees memory leak, prevent a BUG_ON
- dma-buf: Start to introduce cgroup memory accounting in heaps, Remove
sysfs stats, add new tracepoints
- hdmi: Limit infoframes exposure to userspace based on driver
capabilities
- property: Account for property blobs in memcg
Driver Changes:
- atmel-hlcdc: Switch to drmm resources, Support nomodeset parameter,
various patches to use newish helpers and fix memory safety bugs
- hisilicon: Fix various DisplayPort related bugs
- imagination: Introduce hardware version checks
- renesas: Fix kernel panic on reboot
- rockchip: Fix RK3576 HPD interrupt handling, Improve RK3588 HPD
interrupt handling
- v3d: Convert to drm logging helpers
- bridge:
- Continuation of the refcounting effort
- new bridge: Algoltek AG6311
- panel:
- new panel: Anbernic RG-DS
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <mripard@redhat.com>
Link: https://patch.msgid.link/20260122-antique-sexy-junglefowl-1bc5a8@houat
|
|
We can change tcp_rsk() and inet_rsk() to propagate their argument
const qualifier thanks to container_of_const().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260120125353.1470456-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since we can only inspect dmabuf by iterating over process FDs or the
dmabuf_list, we need to add our own tracepoints to track its status in
real time in production.
For example:
binder:3016_1-3102 [006] ...1. 255.126521: dma_buf_export: exp_name=qcom,system size=12685312 ino=2738
binder:3016_1-3102 [006] ...1. 255.126528: dma_buf_fd: exp_name=qcom,system size=12685312 ino=2738 fd=8
binder:3016_1-3102 [006] ...1. 255.126642: dma_buf_mmap_internal: exp_name=qcom,system size=28672 ino=2739
kworker/6:1-86 [006] ...1. 255.127194: dma_buf_put: exp_name=qcom,system size=12685312 ino=2738
RenderThread-9293 [006] ...1. 316.618179: dma_buf_get: exp_name=qcom,system size=12771328 ino=2762 fd=176
RenderThread-9293 [006] ...1. 316.618195: dma_buf_dynamic_attach: exp_name=qcom,system size=12771328 ino=2762 attachment:ffffff880a18dd00 is_dynamic=0 dev_name=kgsl-3d0
RenderThread-9293 [006] ...1. 318.878220: dma_buf_detach: exp_name=qcom,system size=12771328 ino=2762 attachment:ffffff880a18dd00 is_dynamic=0 dev_name=kgsl-3d0
Signed-off-by: Xiang Gao <gaoxiang17@xiaomi.com>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/r/20260109115411.115270-1-gxxa03070307@gmail.com
|
|
Laptop mode was introduced to save battery, by delaying and consolidating
writes and thereby maximize the time rotating hard drives wouldn't have to
spin.
Luckily, rotating hard drives, with their high spin-up times and power
draw, are a thing of the past for battery-powered devices. Reclaim has
also since changed to not write single filesystem pages anymore, and
regular filesystem writeback is lumpy by design.
The juice doesn't appear worth the squeeze anymore. The footprint of the
feature is small, but nevertheless it's a complicating factor in mm,
block, filesystems. Developers don't think about it, and it likely hasn't
been tested with new reclaim and writeback changes in years.
Let's sunset it. Keep the sysctl with a deprecation warning around for a
few more cycles, but remove all functionality behind it.
[akpm@linux-foundation.org: fix Documentation/admin-guide/laptops/index.rst]
Link: https://lkml.kernel.org/r/20251216185201.GH905277@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Suggested-by: Christoph Hellwig <hch@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Shakeel Butt <shakeel.butt@linux.dev>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Deepanshu Kartikey <kartikey406@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
DAMON users can read DAMOS stats via DAMON sysfs interface. It enables
efficient, simple and flexible usages of the stats. Especially for
systems not having advanced tools like perf or bpftrace, that can be
useful. But if the advanced tools are available, exposing the stats via
tracepoint can reduce unnecessary reimplementation of the wheels. Add a
new tracepoint for DAMOS stats, namely damos_stat_after_apply_interval.
The tracepoint is triggered for each scheme's apply interval and exposes
the whole stat values. If the user needs sub-apply interval information
for any chance, damos_before_apply tracepoint could be used.
Link: https://lkml.kernel.org/r/20251216080128.42991-13-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: "Masami Hiramatsu (Google)" <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Fast commits only log operations that have dedicated replay support.
EXT4_IOC_MOVE_EXT swaps extents between regular files and may copy
data, rewriting the affected inodes' block mapping layout without
going through the fast commit tracking paths.
In practice these operations are rare and usually followed by further
updates, but mixing them into a fast commit makes the overall
semantics harder to reason about and risks replay gaps if new call
sites appear.
Teach ext4 to mark the filesystem fast-commit ineligible for the
journal transactions used by move_extent_per_page() when
EXT4_IOC_MOVE_EXT runs.
This forces those transactions to fall back to a full commit,
ensuring that these multi-inode extent swaps are captured by the
normal journal rather than partially encoded in fast commit TLVs.
This change should not affect common workloads but makes online
defragmentation safer and easier to reason about under fast commit.
Testing:
1. prepare:
dd if=/dev/zero of=/root/fc_move.img bs=1M count=0 seek=256
mkfs.ext4 -O fast_commit -F /root/fc_move.img
mkdir -p /mnt/fc_move && mount -t ext4 -o loop \
/root/fc_move.img /mnt/fc_move
2. Created two files, ran EXT4_IOC_MOVE_EXT via e4defrag, and checked
the ineligible reason statistics:
fallocate -l 64M /mnt/fc_move/file1
cp /mnt/fc_move/file1 /mnt/fc_move/file2
e4defrag /mnt/fc_move/file1
cat /proc/fs/ext4/loop0/fc_info
shows "Move extents": > 0 and fc stats ineligible > 0.
Signed-off-by: Li Chen <me@linux.beauty>
Link: https://patch.msgid.link/20251211115146.897420-4-me@linux.beauty
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Fast commits only log operations that have dedicated replay support.
Enabling fs-verity builds a Merkle tree and updates inode and orphan
state in ways that are not described by the fast commit replay tags.
In practice these operations are rare and usually followed by further
updates, but mixing them into a fast commit makes the overall
semantics harder to reason about and risks replay gaps if new call
sites appear.
Teach ext4 to mark the filesystem fast-commit ineligible when
ext4_end_enable_verity() starts its journal transaction.
This forces that transaction to fall back to a full commit, ensuring
that the fs-verity enable changes are captured by the normal journal
rather than partially encoded in fast commit TLVs.
This change should not affect common workloads but makes fs-verity
enable safer and easier to reason about under fast commit.
Testing:
1. prepare:
dd if=/dev/zero of=/root/fc_verity.img bs=1M count=0 seek=128
mkfs.ext4 -O fast_commit,verity -F /root/fc_verity.img
mkdir -p /mnt/fc_verity && mount -t ext4 -o loop /root/fc_verity.img /mnt/fc_verity
2. Enabled fs-verity on a file and verified reason accounting:
echo "data" > /mnt/fc_verity/verityfile
/root/enable_verity /mnt/fc_verity/verityfile
sync
tail -n 1 /proc/fs/ext4/loop0/fc_info
"fs-verity enable": 1
3. Enabled fs-verity on a second file, fsynced it, and checked that the
ineligible commit counter is updated too:
echo "data2" > /mnt/fc_verity/verityfile2
/root/enable_verity /mnt/fc_verity/verityfile2
/root/fsync_file /mnt/fc_verity/verityfile2
sync
/proc/fs/ext4/loop0/fc_info shows "fs-verity enable" incremented and
fc stats ineligible increased accordingly.
Signed-off-by: Li Chen <me@linux.beauty>
Link: https://patch.msgid.link/20251211115146.897420-3-me@linux.beauty
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Fast commits only log operations that have dedicated replay support.
Inode format migration (indirect<->extent layout changes via
EXT4_IOC_MIGRATE or toggling EXT4_EXTENTS_FL) rewrites the block mapping
representation without going through the fast commit tracking paths.
In practice these migrations are rare and usually followed by further
updates, but mixing them into a fast commit makes the overall semantics
harder to reason about and risks replay gaps if new call sites appear.
Teach ext4 to mark the filesystem fast-commit ineligible when
ext4_ext_migrate() or ext4_ind_migrate() start their journal transactions.
This forces those transactions to fall back to a full commit, ensuring
that the entire inode layout change is captured by the normal journal
rather than partially encoded in fast commit TLVs. This change should
not affect common workloads but makes format migrations safer and easier
to reason about under fast commit.
Testing:
1. prepare:
dd if=/dev/zero of=/root/fc.img bs=1M count=0 seek=128
mkfs.ext4 -O fast_commit -F /root/fc.img
mkdir -p /mnt/fc && mount -t ext4 -o loop /root/fc.img /mnt/fc
2. Created a test file and toggled the extents flag to exercise both
ext4_ind_migrate() and ext4_ext_migrate():
touch /mnt/fc/migtest
chattr -e /mnt/fc/migtest
chattr +e /mnt/fc/migtest
3. Verified fast-commit ineligible statistics:
tail -n 1 /proc/fs/ext4/loop0/fc_info
"Inode format migration": 2
Signed-off-by: Li Chen <me@linux.beauty>
Link: https://patch.msgid.link/20251211115146.897420-2-me@linux.beauty
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
If rxrpc_recvmsg() fails because MSG_DONTWAIT was specified but the call at
the front of the recvmsg queue already has its mutex locked, it requeues
the call - whether or not the call is already queued. The call may be on
the queue because MSG_PEEK was also passed and so the call was not dequeued
or because the I/O thread requeued it.
The unconditional requeue may then corrupt the recvmsg queue, leading to
things like UAFs or refcount underruns.
Fix this by only requeuing the call if it isn't already on the queue - and
moving it to the front if it is already queued. If we don't queue it, we
have to put the ref we obtained by dequeuing it.
Also, MSG_PEEK doesn't dequeue the call so shouldn't call
rxrpc_notify_socket() for the call if we didn't use up all the data on the
queue, so fix that also.
Fixes: 540b1c48c37a ("rxrpc: Fix deadlock between call creation and sendmsg/recvmsg")
Reported-by: Faith <faith@zellic.io>
Reported-by: Pumpkin Chang <pumpkin@devco.re>
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Marc Dionne <marc.dionne@auristor.com>
cc: Nir Ohfeld <niro@wiz.io>
cc: Willy Tarreau <w@1wt.eu>
cc: Simon Horman <horms@kernel.org>
cc: linux-afs@lists.infradead.org
cc: stable@kernel.org
Link: https://patch.msgid.link/95163.1768428203@warthog.procyon.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Centralize how we synchronize a lazytime update into the actual on-disk
timestamp into a single helper.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://patch.msgid.link/20260108141934.2052404-7-hch@lst.de
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd fixes from Chuck Lever:
"A set of NFSD fixes for stable that arrived after the merge window:
- Remove an invalid NFS status code
- Fix an fstests failure when using pNFS
- Fix a UAF in v4_end_grace()
- Fix the administrative interface used to revoke NFSv4 state
- Fix a memory leak reported by syzbot"
* tag 'nfsd-6.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
NFSD: net ref data still needs to be freed even if net hasn't startup
nfsd: check that server is running in unlock_filesystem
nfsd: use correct loop termination in nfsd4_revoke_states()
nfsd: provide locking for v4_end_grace
NFSD: Fix permission check for read access to executable-only files
NFSD: Remove NFSERR_EAGAIN
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- fix potential deadlock due to mismatching transaction states when
waiting for the current transaction
- fix squota accounting with nested snapshots
- fix quota inheritance of qgroups with multiple parent qgroups
- fix NULL inode pointer in evict tracepoint
- fix writes beyond end of file on systems with 64K page size and 4K
block size
- fix logging of inodes after exchange rename
- fix use after free when using ref_tracker feature
- space reservation fixes
* tag 'for-6.19-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix reservation leak in some error paths when inserting inline extent
btrfs: do not free data reservation in fallback from inline due to -ENOSPC
btrfs: fix use-after-free warning in btrfs_get_or_create_delayed_node()
btrfs: always detect conflicting inodes when logging inode refs
btrfs: fix beyond-EOF write handling
btrfs: fix deadlock in wait_current_trans() due to ignored transaction type
btrfs: fix NULL dereference on root when tracing inode eviction
btrfs: qgroup: update all parent qgroups when doing quick inherit
btrfs: fix qgroup_snapshot_quick_inherit() squota bug
|
|
I haven't found an NFSERR_EAGAIN in RFCs 1094, 1813, 7530, or 8881.
None of these RFCs have an NFS status code that match the numeric
value "11".
Based on the meaning of the EAGAIN errno, I presume the use of this
status in NFSD means NFS4ERR_DELAY. So replace the one usage of
nfserr_eagain, and remove it from NFSD's NFS status conversion
tables.
As far as I can tell, NFSERR_EAGAIN has existed since the pre-git
era, but was not actually used by any code until commit f4e44b393389
("NFSD: delay unmount source's export after inter-server copy
completed."), at which time it become possible for NFSD to return
a status code of 11 (which is not valid NFS protocol).
Fixes: f4e44b393389 ("NFSD: delay unmount source's export after inter-server copy completed.")
Cc: stable@vger.kernel.org
Reviewed-by: NeilBrown <neil@brown.name>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-next
drm-misc-next for 6.20:
Core Changes:
- dma-buf: Add tracepoints
- sched: Introduce new helpers
Driver Changes:
- amdxdna: Enable hardware context priority, Remove (obsolete and
never public) NPU2 Support, Race condition fix
- rockchip: Add RK3368 HDMI Support
- rz-du: Add RZ/V2H(P) MIPI-DSI Support
- panels:
- st7571: Introduce SPI support
- New panels: Sitronix ST7920, Samsung LTL106HL02, LG LH546WF1-ED01, HannStar HSD156JUW2
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <mripard@redhat.com>
Link: https://patch.msgid.link/20251219-arcane-quaint-skunk-e383b0@houat
|
|
PCIe link speed degradation directly impacts system performance and often
indicates hardware issues such as faulty devices, physical layer problems,
or configuration errors.
To this end, add a RAS tracepoint to monitor link speed changes, enabling
proactive health checks and diagnostic analysis.
The following output is generated when a device is hotplugged:
$ echo 1 > /sys/kernel/debug/tracing/events/pci/pcie_link_event/enable
$ cat /sys/kernel/debug/tracing/trace_pipe
irq/51-pciehp-88 [001] ..... 381.545386: pcie_link_event: 0000:00:02.0 type:4, reason:4, cur_bus_speed:20, max_bus_speed:23, width:1, flit_mode:0, status:DLLLA
Suggested-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Suggested-by: Matthew W Carlis <mattc@purestorage.com>
Suggested-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Shuai Xue <xueshuai@linux.alibaba.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://patch.msgid.link/20251210132907.58799-3-xueshuai@linux.alibaba.com
|
|
Hotplug events are critical indicators for analyzing hardware health, and
surprise link downs can significantly impact system performance and
reliability.
Define a new TRACING_SYSTEM named "pci", add a generic RAS tracepoint
for hotplug event to help health checks. Add enum pci_hotplug_event in
include/uapi/linux/pci.h so applications like rasdaemon can register
tracepoint event handlers for it.
The following output is generated when a device is hotplugged:
$ echo 1 > /sys/kernel/debug/tracing/events/pci/pci_hp_event/enable
$ cat /sys/kernel/debug/tracing/trace_pipe
irq/51-pciehp-88 [001] ..... 1311.177459: pci_hp_event: 0000:00:02.0 slot:10, event:CARD_PRESENT
irq/51-pciehp-88 [001] ..... 1311.177566: pci_hp_event: 0000:00:02.0 slot:10, event:LINK_UP
Suggested-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Shuai Xue <xueshuai@linux.alibaba.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Lukas Wunner <lukas@wunner.de>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org> # for trace event
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://patch.msgid.link/20251210132907.58799-2-xueshuai@linux.alibaba.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
- Fix FPU core dumps on certain CPU models
- Fix htmldocs build warning
- Export TLB tracing event name via header
- Remove unused constant from <linux/mm_types.h>
- Fix comments
- Fix whitespace noise in documentation
- Fix variadic structure's definition to un-confuse UBSAN
- Fix posted MSI interrupts irq_retrigger() bug
- Fix asm build failure with older GCC builds
* tag 'x86-urgent-2025-12-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/bug: Fix old GCC compile fails
x86/msi: Make irq_retrigger() functional for posted MSI
x86/platform/uv: Fix UBSAN array-index-out-of-bounds
mm: Remove tlb_flush_reason::NR_TLB_FLUSH_REASONS from <linux/mm_types.h>
x86/mm/tlb/trace: Export the TLB_REMOTE_WRONG_CPU enum in <trace/events/tlb.h>
x86/sgx: Remove unmatched quote in __sgx_encl_extend function comment
x86/boot/Documentation: Fix whitespace noise in boot.rst
x86/fpu: Fix FPU state core dump truncation on CPUs with no extended xfeatures
x86/boot/Documentation: Fix htmldocs build warning due to malformed table in boot.rst
|
|
Since we can only inspect dmabuf by iterating over process FDs or the
dmabuf_list, we need to add our own tracepoints to track its status in
real time in production.
For example:
binder:3016_1-3102 [006] ...1. 255.126521: dma_buf_export: exp_name=qcom,system size=12685312 ino=2738
binder:3016_1-3102 [006] ...1. 255.126528: dma_buf_fd: exp_name=qcom,system size=12685312 ino=2738 fd=8
binder:3016_1-3102 [006] ...1. 255.126642: dma_buf_mmap_internal: exp_name=qcom,system size=28672 ino=2739
kworker/6:1-86 [006] ...1. 255.127194: dma_buf_put: exp_name=qcom,system size=12685312 ino=2738
RenderThread-9293 [006] ...1. 316.618179: dma_buf_get: exp_name=qcom,system size=12771328 ino=2762 fd=176
RenderThread-9293 [006] ...1. 316.618195: dma_buf_dynamic_attach: exp_name=qcom,system size=12771328 ino=2762 attachment:ffffff880a18dd00 is_dynamic=0 dev_name=kgsl-3d0
RenderThread-9293 [006] ...1. 318.878220: dma_buf_detach: exp_name=qcom,system size=12771328 ino=2762 attachment:ffffff880a18dd00 is_dynamic=0 dev_name=kgsl-3d0
Signed-off-by: Xiang Gao <gaoxiang17@xiaomi.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/r/20251218062853.819744-1-gxxa03070307@gmail.com
Signed-off-by: Christian König <christian.koenig@amd.com>
|
|
When evicting an inode the first thing we do is to setup tracing for it,
which implies fetching the root's id. But in btrfs_evict_inode() the
root might be NULL, as implied in the next check that we do in
btrfs_evict_inode().
Hence, we either should set the ->root_objectid to 0 in case the root is
NULL, or we move tracing setup after checking that the root is not
NULL. Setting the rootid to 0 at least gives us the possibility to trace
this call even in the case when the root is NULL, so that's the solution
taken here.
Fixes: 1abe9b8a138c ("Btrfs: add initial tracepoint support for btrfs")
Reported-by: syzbot+d991fea1b4b23b1f6bf8@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=d991fea1b4b23b1f6bf8
Signed-off-by: Miquel Sabaté Solà <mssola@mssola.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Pull ceph updates from Ilya Dryomov:
"We have a patch that adds an initial set of tracepoints to the MDS
client from Max, a fix that hardens osdmap parsing code from myself
(marked for stable) and a few assorted fixups"
* tag 'ceph-for-6.19-rc1' of https://github.com/ceph/ceph-client:
rbd: stop selecting CRC32, CRYPTO, and CRYPTO_AES
ceph: stop selecting CRC32, CRYPTO, and CRYPTO_AES
libceph: make decode_pool() more resilient against corrupted osdmaps
libceph: Amend checking to fix `make W=1` build breakage
ceph: Amend checking to fix `make W=1` build breakage
ceph: add trace points to the MDS client
libceph: fix log output race condition in OSD client
|
|
When the TLB_REMOTE_WRONG_CPU enum was introduced for the tlb_flush
tracepoint, the enum was not exported to user-space. Add it to the
appropriate macro definition to enable parsing by userspace tools, as
per:
Link: https://lore.kernel.org/all/20150403013802.220157513@goodmis.org
[ mingo: Capitalize IPI, etc. ]
Fixes: 2815a56e4b72 ("x86/mm/tlb: Add tracepoint for TLB flush IPI to stale CPU")
Signed-off-by: Tal Zussman <tz2294@columbia.edu>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Rik van Riel <riel@surriel.com>
Link: https://patch.msgid.link/20251212-tlb-trace-fix-v2-1-d322e0ad9b69@columbia.edu
|
|
This patch adds trace points to the Ceph filesystem MDS client:
- request submission (CEPH_MSG_CLIENT_REQUEST) and completion
(CEPH_MSG_CLIENT_REPLY)
- capabilities (CEPH_MSG_CLIENT_CAPS)
These are the central pieces that are useful for analyzing MDS
latency/performance problems from the client's perspective.
In the long run, all doutc() calls should be replaced with
tracepoints. This way, the Ceph filesystem can be traced at any time
(without spamming the kernel log). Additionally, trace points can be
used in BPF programs (which can even deference the pointer parameters
and extract more values).
Signed-off-by: Max Kellermann <max.kellermann@ionos.com>
Reviewed-by: Viacheslav Dubeyko <Slava.Dubeyko@ibm.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs
Pull f2fs updates from Jaegeuk Kim:
"This series focuses on minor clean-ups and performance optimizations
across sysfs, documentation, debugfs, tracepoints, slab allocation,
and GC. Furthermore, it resolves several corner-case bugs caught by
xfstests, as well as issues related to 16KB page support and
f2fs_enable_checkpoint.
Enhancement:
- wrap ASCII tables in literal blocks to fix LaTeX build
- optimize trace_f2fs_write_checkpoint with enums
- support to show curseg.next_blkoff in debugfs
- add a sysfs entry to show max open zones
- add fadvise tracepoint
- use global inline_xattr_slab instead of per-sb slab cache
- set default valid_thresh_ratio to 80 for zoned devices
- maintain one time GC mode is enabled during whole zoned GC cycle
Bug fix:
- ensure node page reads complete before f2fs_put_super() finishes
- do not account invalid blocks in get_left_section_blocks()
- revert summary entry count from 2048 to 512 in 16kb block support
- detect recoverable inode during dryrun of find_fsync_dnodes()
- fix age extent cache insertion skip on counter overflow
- add sanity checks before unlinking and loading inodes
- ensure minimum trim granularity accounts for all devices
- block cache/dio write during f2fs_enable_checkpoint()
- propagate error from f2fs_enable_checkpoint()
- invalidate dentry cache on failed whiteout creation
- avoid updating compression context during writeback
- avoid updating zero-sized extent in extent cache
- avoid potential deadlock"
* tag 'f2fs-for-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (39 commits)
f2fs: ignore discard return value
f2fs: optimize trace_f2fs_write_checkpoint with enums
f2fs: fix to not account invalid blocks in get_left_section_blocks()
f2fs: support to show curseg.next_blkoff in debugfs
docs: f2fs: wrap ASCII tables in literal blocks to fix LaTeX build
f2fs: expand scalability of f2fs mount option
f2fs: change default schedule timeout value
f2fs: introduce f2fs_schedule_timeout()
f2fs: use memalloc_retry_wait() as much as possible
f2fs: add a sysfs entry to show max open zones
f2fs: wrap all unusable_blocks_per_sec code in CONFIG_BLK_DEV_ZONED
f2fs: simplify list initialization in f2fs_recover_fsync_data()
f2fs: revert summary entry count from 2048 to 512 in 16kb block support
f2fs: fix to detect recoverable inode during dryrun of find_fsync_dnodes()
f2fs: fix return value of f2fs_recover_fsync_data()
f2fs: add fadvise tracepoint
f2fs: fix age extent cache insertion skip on counter overflow
f2fs: Add sanity checks before unlinking and loading inodes
f2fs: Rename f2fs_unlink exit label
f2fs: ensure minimum trim granularity accounts for all devices
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull io_uring updates from Jens Axboe:
"Followup set of fixes for io_uring for this merge window. These are
either later fixes, or cleanups that don't make sense to defer. This
pull request contains:
- Fix for a recent regression in io-wq worker creation
- Tracing cleanup
- Use READ_ONCE/WRITE_ONCE consistently for ring mapped kbufs. Mostly
for documentation purposes, indicating that they are shared with
userspace
- Fix for POLL_ADD losing a completion, if the request is updated and
now is triggerable - eg, if POLLIN is set with the updated, and the
polled file is readable
- In conjunction with the above fix, also unify how poll wait queue
entries are deleted with the head update. We had 3 different spots
doing both the list deletion and head write, with one of them
nicely documented. Abstract that into a helper and use it
consistently
- Small series from Joanne fixing an issue with buffer cloning, and
cleaning up the arg validation"
* tag 'io_uring-6.19-20251208' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
io_uring/poll: unify poll waitqueue entry and list removal
io_uring/kbuf: use WRITE_ONCE() for userspace-shared buffer ring fields
io_uring/kbuf: use READ_ONCE() for userspace-mapped memory
io_uring/rsrc: fix lost entries after cloned range
io_uring/rsrc: rename misleading src_node variable in io_clone_buffers()
io_uring/rsrc: clean up buffer cloning arg validation
io_uring/trace: rename io_uring_queue_async_work event "rw" field
io_uring/io-wq: always retry worker create on ERESTART*
io_uring/poll: correctly handle io_poll_add() return value on update
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
"__vmalloc()/kvmalloc() and no-block support" (Uladzislau Rezki)
Rework the vmalloc() code to support non-blocking allocations
(GFP_ATOIC, GFP_NOWAIT)
"ksm: fix exec/fork inheritance" (xu xin)
Fix a rare case where the KSM MMF_VM_MERGE_ANY prctl state is not
inherited across fork/exec
"mm/zswap: misc cleanup of code and documentations" (SeongJae Park)
Some light maintenance work on the zswap code
"mm/page_owner: add debugfs files 'show_handles' and 'show_stacks_handles'" (Mauricio Faria de Oliveira)
Enhance the /sys/kernel/debug/page_owner debug feature by adding
unique identifiers to differentiate the various stack traces so
that userspace monitoring tools can better match stack traces over
time
"mm/page_alloc: pcp->batch cleanups" (Joshua Hahn)
Minor alterations to the page allocator's per-cpu-pages feature
"Improve UFFDIO_MOVE scalability by removing anon_vma lock" (Lokesh Gidra)
Address a scalability issue in userfaultfd's UFFDIO_MOVE operation
"kasan: cleanups for kasan_enabled() checks" (Sabyrzhan Tasbolatov)
"drivers/base/node: fold node register and unregister functions" (Donet Tom)
Clean up the NUMA node handling code a little
"mm: some optimizations for prot numa" (Kefeng Wang)
Cleanups and small optimizations to the NUMA allocation hinting
code
"mm/page_alloc: Batch callers of free_pcppages_bulk" (Joshua Hahn)
Address long lock hold times at boot on large machines. These were
causing (harmless) softlockup warnings
"optimize the logic for handling dirty file folios during reclaim" (Baolin Wang)
Remove some now-unnecessary work from page reclaim
"mm/damon: allow DAMOS auto-tuned for per-memcg per-node memory usage" (SeongJae Park)
Enhance the DAMOS auto-tuning feature
"mm/damon: fixes for address alignment issues in DAMON_LRU_SORT and DAMON_RECLAIM" (Quanmin Yan)
Fix DAMON_LRU_SORT and DAMON_RECLAIM with certain userspace
configuration
"expand mmap_prepare functionality, port more users" (Lorenzo Stoakes)
Enhance the new(ish) file_operations.mmap_prepare() method and port
additional callsites from the old ->mmap() over to ->mmap_prepare()
"Fix stale IOTLB entries for kernel address space" (Lu Baolu)
Fix a bug (and possible security issue on non-x86) in the IOMMU
code. In some situations the IOMMU could be left hanging onto a
stale kernel pagetable entry
"mm/huge_memory: cleanup __split_unmapped_folio()" (Wei Yang)
Clean up and optimize the folio splitting code
"mm, swap: misc cleanup and bugfix" (Kairui Song)
Some cleanups and a minor fix in the swap discard code
"mm/damon: misc documentation fixups" (SeongJae Park)
"mm/damon: support pin-point targets removal" (SeongJae Park)
Permit userspace to remove a specific monitoring target in the
middle of the current targets list
"mm: MISC follow-up patches for linux/pgalloc.h" (Harry Yoo)
A couple of cleanups related to mm header file inclusion
"mm/swapfile.c: select swap devices of default priority round robin" (Baoquan He)
improve the selection of swap devices for NUMA machines
"mm: Convert memory block states (MEM_*) macros to enums" (Israel Batista)
Change the memory block labels from macros to enums so they will
appear in kernel debug info
"ksm: perform a range-walk to jump over holes in break_ksm" (Pedro Demarchi Gomes)
Address an inefficiency when KSM unmerges an address range
"mm/damon/tests: fix memory bugs in kunit tests" (SeongJae Park)
Fix leaks and unhandled malloc() failures in DAMON userspace unit
tests
"some cleanups for pageout()" (Baolin Wang)
Clean up a couple of minor things in the page scanner's
writeback-for-eviction code
"mm/hugetlb: refactor sysfs/sysctl interfaces" (Hui Zhu)
Move hugetlb's sysfs/sysctl handling code into a new file
"introduce VM_MAYBE_GUARD and make it sticky" (Lorenzo Stoakes)
Make the VMA guard regions available in /proc/pid/smaps and
improves the mergeability of guarded VMAs
"mm: perform guard region install/remove under VMA lock" (Lorenzo Stoakes)
Reduce mmap lock contention for callers performing VMA guard region
operations
"vma_start_write_killable" (Matthew Wilcox)
Start work on permitting applications to be killed when they are
waiting on a read_lock on the VMA lock
"mm/damon/tests: add more tests for online parameters commit" (SeongJae Park)
Add additional userspace testing of DAMON's "commit" feature
"mm/damon: misc cleanups" (SeongJae Park)
"make VM_SOFTDIRTY a sticky VMA flag" (Lorenzo Stoakes)
Address the possible loss of a VMA's VM_SOFTDIRTY flag when that
VMA is merged with another
"mm: support device-private THP" (Balbir Singh)
Introduce support for Transparent Huge Page (THP) migration in zone
device-private memory
"Optimize folio split in memory failure" (Zi Yan)
"mm/huge_memory: Define split_type and consolidate split support checks" (Wei Yang)
Some more cleanups in the folio splitting code
"mm: remove is_swap_[pte, pmd]() + non-swap entries, introduce leaf entries" (Lorenzo Stoakes)
Clean up our handling of pagetable leaf entries by introducing the
concept of 'software leaf entries', of type softleaf_t
"reparent the THP split queue" (Muchun Song)
Reparent the THP split queue to its parent memcg. This is in
preparation for addressing the long-standing "dying memcg" problem,
wherein dead memcg's linger for too long, consuming memory
resources
"unify PMD scan results and remove redundant cleanup" (Wei Yang)
A little cleanup in the hugepage collapse code
"zram: introduce writeback bio batching" (Sergey Senozhatsky)
Improve zram writeback efficiency by introducing batched bio
writeback support
"memcg: cleanup the memcg stats interfaces" (Shakeel Butt)
Clean up our handling of the interrupt safety of some memcg stats
"make vmalloc gfp flags usage more apparent" (Vishal Moola)
Clean up vmalloc's handling of incoming GFP flags
"mm: Add soft-dirty and uffd-wp support for RISC-V" (Chunyan Zhang)
Teach soft dirty and userfaultfd write protect tracking to use
RISC-V's Svrsw60t59b extension
"mm: swap: small fixes and comment cleanups" (Youngjun Park)
Fix a small bug and clean up some of the swap code
"initial work on making VMA flags a bitmap" (Lorenzo Stoakes)
Start work on converting the vma struct's flags to a bitmap, so we
stop running out of them, especially on 32-bit
"mm/swapfile: fix and cleanup swap list iterations" (Youngjun Park)
Address a possible bug in the swap discard code and clean things
up a little
[ This merge also reverts commit ebb9aeb980e5 ("vfio/nvgrace-gpu:
register device memory for poison handling") because it looks
broken to me, I've asked for clarification - Linus ]
* tag 'mm-stable-2025-12-03-21-26' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (321 commits)
mm: fix vma_start_write_killable() signal handling
mm/swapfile: use plist_for_each_entry in __folio_throttle_swaprate
mm/swapfile: fix list iteration when next node is removed during discard
fs/proc/task_mmu.c: fix make_uffd_wp_huge_pte() huge pte handling
mm/kfence: add reboot notifier to disable KFENCE on shutdown
memcg: remove inc/dec_lruvec_kmem_state helpers
selftests/mm/uffd: initialize char variable to Null
mm: fix DEBUG_RODATA_TEST indentation in Kconfig
mm: introduce VMA flags bitmap type
tools/testing/vma: eliminate dependency on vma->__vm_flags
mm: simplify and rename mm flags function for clarity
mm: declare VMA flags by bit
zram: fix a spelling mistake
mm/page_alloc: optimize lowmem_reserve max lookup using its semantic monotonicity
mm/vmscan: skip increasing kswapd_failures when reclaim was boosted
pagemap: update BUDDY flag documentation
mm: swap: remove scan_swap_map_slots() references from comments
mm: swap: change swap_alloc_slow() to void
mm, swap: remove redundant comment for read_swap_cache_async
mm, swap: use SWP_SOLIDSTATE to determine if swap is rotational
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing updates from Steven Rostedt:
- Extend tracing option mask to 64 bits
The trace options were defined by a 32 bit variable. This limits the
tracing instances to have a total of 32 different options. As that
limit has been hit, and more options are being added, increase the
option mask to a 64 bit number, doubling the number of options
available.
As this is required for the kprobe topic branches as well as the
tracing topic branch, a separate branch was created and merged into
both.
- Make trace_user_fault_read() available for the rest of tracing
The function trace_user_fault_read() is used by trace_marker file
read to allow reading user space to be done fast and without locking
or allocations. Make this available so that the system call trace
events can use it too.
- Have system call trace events read user space values
Now that the system call trace events callbacks are called in a
faultable context, take advantage of this and read the user space
buffers for various system calls. For example, show the path name of
the openat system call instead of just showing the pointer to that
path name in user space. Also show the contents of the buffer of the
write system call. Several system call trace events are updated to
make tracing into a light weight strace tool for all applications in
the system.
- Update perf system call tracing to do the same
- And a config and syscall_user_buf_size file to control the size of
the buffer
Limit the amount of data that can be read from user space. The
default size is 63 bytes but that can be expanded to 165 bytes.
- Allow the persistent ring buffer to print system calls normally
The persistent ring buffer prints trace events by their type and
ignores the print_fmt. This is because the print_fmt may change from
kernel to kernel. As the system call output is fixed by the system
call ABI itself, there's no reason to limit that. This makes reading
the system call events in the persistent ring buffer much nicer and
easier to understand.
- Add options to show text offset to function profiler
The function profiler that counts the number of times a function is
hit currently lists all functions by its name and offset. But this
becomes ambiguous when there are several functions with the same
name.
Add a tracing option that changes the output to be that of
'_text+offset' instead. Now a user space tool can use this
information to map the '_text+offset' to the unique function it is
counting.
- Report bad dynamic event command
If a bad command is passed to the dynamic_events file, report it
properly in the error log.
- Clean up tracer options
Clean up the tracer option code a bit, by removing some useless code
and also using switch statements instead of a series of if
statements.
- Have tracing options be instance specific
Tracers can have their own options (function tracer, irqsoff tracer,
function graph tracer, etc). But now that the same tracer can be
enabled in multiple trace instances, their options are still global.
The API is per instance, thus changing one affects other instances.
This isn't even consistent, as the option take affect differently
depending on when an tracer started in an instance. Make the options
for instances only affect the instance it is changed under.
- Optimize pid_list lock contention
Whenever the pid_list is read, it uses a spin lock. This happens at
every sched switch. Taking the lock at sched switch can be removed by
instead using a seqlock counter.
- Clean up the trace trigger structures
The trigger code uses two different structures to implement a single
tigger. This was due to trying to reuse code for the two different
types of triggers (always on trigger, and count limited trigger). But
by adding a single field to one structure, the other structure could
be absorbed into the first structure making he code easier to
understand.
- Create a bulk garbage collector for trace triggers
If user space has triggers for several hundreds of events and then
removes them, it can take several seconds to complete. This is
because each removal calls tracepoint_synchronize_unregister() that
can take hundreds of milliseconds to complete.
Instead, create a helper thread that will do the clean up. When a
trigger is removed, it will create the kthread if it isn't already
created, and then add the trigger to a llist. The kthread will take
the items off the llist, call tracepoint_synchronize_unregister(),
and then remove the items it took off. It will then check if there's
more items to free before sleeping.
This makes user space removing all these triggers to finish in less
than a second.
- Allow function tracing of some of the tracing infrastructure code
Because the tracing code can cause recursion issues if it is traced
by the function tracer the entire tracing directory disables function
tracing. But not all of tracing causes issues if it is traced.
Namely, the event tracing code. Add a config that enables some of the
tracing code to be traced to help in debugging it. Note, when this is
enabled, it does add noise to general function tracing, especially if
events are enabled as well (which is a common case).
- Add boot-time backup instance for persistent buffer
The persistent ring buffer is used mostly for kernel crash analysis
in the field. One issue is that if there's a crash, the data in the
persistent ring buffer must be read before tracing can begin using
it. This slows down the boot process. Once tracing starts in the
persistent ring buffer, the old data must be freed and the addresses
no longer match and old events can't be in the buffer with new
events.
Create a way to create a backup buffer that copies the persistent
ring buffer at boot up. Then after a crash, the always on tracer can
begin immediately as well as the normal boot process while the crash
analysis tooling uses the backup buffer. After the backup buffer is
finished being read, it can be removed.
- Enable function graph args and return address options at the same
time
Currently the when reading of arguments in the function graph tracer
is enabled, the option to record the parent function in the entry
event can not be enabled. Update the code so that it can.
- Add new struct_offset() helper macro
Add a new macro that takes a pointer to a structure and a name of one
of its members and it will return the offset of that member. This
allows the ring buffer code to simplify the following:
From: size = struct_size(entry, buf, cnt - sizeof(entry->id));
To: size = struct_offset(entry, id) + cnt;
There should be other simplifications that this macro can help out
with as well
* tag 'trace-v6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (42 commits)
overflow: Introduce struct_offset() to get offset of member
function_graph: Enable funcgraph-args and funcgraph-retaddr to work simultaneously
tracing: Add boot-time backup of persistent ring buffer
ftrace: Allow tracing of some of the tracing code
tracing: Use strim() in trigger_process_regex() instead of skip_spaces()
tracing: Add bulk garbage collection of freeing event_trigger_data
tracing: Remove unneeded event_mutex lock in event_trigger_regex_release()
tracing: Merge struct event_trigger_ops into struct event_command
tracing: Remove get_trigger_ops() and add count_func() from trigger ops
tracing: Show the tracer options in boot-time created instance
ftrace: Avoid redundant initialization in register_ftrace_direct
tracing: Remove unused variable in tracing_trace_options_show()
fgraph: Make fgraph_no_sleep_time signed
tracing: Convert function graph set_flags() to use a switch() statement
tracing: Have function graph tracer option sleep-time be per instance
tracing: Move graph-time out of function graph options
tracing: Have function graph tracer option funcgraph-irqs be per instance
trace/pid_list: optimize pid_list->lock contention
tracing: Have function graph tracer define options per instance
tracing: Have function tracer define options per instance
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown:
"This release is almost entirely new drivers, with a couple of small
changes in generic code.
The biggest individual update is a rename of the existing Microchip
driver and the addition of a new driver for the silicon SPI controller
in their PolarFire SoCs. The overlap between the soft IP supported by
the current driver and this new one is regrettably all in the IP and
not in the register interface offered to software.
- Add a time offset parameter for offloads, allowing them to be
defined in relation to each other. This is useful for IIO type
applcations where you trigger an operation then read the result
after a delay.
- Add a tracepoint for flash exec_ops, bringing the flash support
more in line with the debuggability of vanilla SPI.
- Support for Airoha EN7523, Arduino MCUs, Aspeed AST2700, Microchip
PolarFire SPI controllers, NXP i.MX51 ECSPI target mode, Qualcomm
IPQ5414 and IPQ5332, Renesas RZ/T2H, RZ/V2N and RZ/2NH and SpacemiT
K1 QuadSPI.
There's also a small set of ASoC cleanups that I mistakenly applied to
the SPI tree and then put more stuff on top of before it was brought
to my attention, sorry about that"
* tag 'spi-v6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (80 commits)
spi: microchip-core: Refactor FIFO read and write handlers
spi: ch341: fix out-of-bounds memory access in ch341_transfer_one
spi: microchip-core: Remove unneeded PM related macro
spi: microchip-core: Use SPI_MODE_X_MASK
spi: microchip-core: Utilise temporary variable for struct device
spi: microchip-core: Replace dead code (-ENOMEM error message)
spi: microchip-core: use min() instead of min_t()
spi: dt-bindings: airoha: add compatible for EN7523
spi: airoha-snfi: en7523: workaround flash damaging if UART_TXD was short to GND
spi: dt-bindings: renesas,rzv2h-rspi: Document RZ/V2N SoC support
spi: dt-bindings: renesas,rzv2h-rspi: Document RZ/V2N SoC support
spi: microchip: Enable compile-testing for FPGA SPI controllers
spi: Fix potential uninitialized variable in probe()
spi: rzv2h-rspi: add support for RZ/T2H and RZ/N2H
spi: dt-bindings: renesas,rzv2h-rspi: document RZ/T2H and RZ/N2H
spi: rzv2h-rspi: add support for loopback mode
spi: rzv2h-rspi: add support for variable transfer clock
spi: rzv2h-rspi: add support for using PCLK for transfer clock
spi: rzv2h-rspi: make transfer clock rate finding chip-specific
spi: rzv2h-rspi: avoid recomputing transfer frequency
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"The majority of changes at this time were about ASoC with a lot of
code refactoring works. From the functionality POV, there isn't much
to see, but we have a wide range of device-specific fixes and updates.
Here are some highlights:
- Continued ASoC API cleanup work, spanned over many files
- Added a SoundWire SCDA generic class driver with regmap support
- Enhancements and fixes for Cirrus, Intel, Maxim and Qualcomm.
- Support for ASoC Allwinner A523, Mediatek MT8189, Qualcomm QCM2290,
QRB2210 and SM6115, SpacemiT K1, and TI TAS2568, TAS5802, TAS5806,
TAS5815, TAS5828 and TAS5830
- Usual HD-audio and USB-audio quirks and fixups
- Support for Onkyo SE-300PCIE, TASCAM IF-FW/DM MkII
Some gpiolib changes for shared GPIOs are included along with this PR
for covering ASoC drivers changes"
* tag 'sound-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (739 commits)
ALSA: hda/realtek: Add PCI SSIDs to HP ProBook quirks
ALSA: usb-audio: Simplify with usb_endpoint_max_periodic_payload()
ALSA: hda/realtek: fix mute/micmute LEDs don't work for more HP laptops
ALSA: rawmidi: Fix inconsistent indenting warning reported by smatch
ALSA: dice: fix buffer overflow in detect_stream_formats()
ASoC: codecs: Modify awinic amplifier dsp read and write functions
ASoC: SDCA: Fixup some more Kconfig issues
ASoC: cs35l56: Log a message if firmware is missing
ASoC: nau8325: Delete a stray tab
firmware: cs_dsp: Add test cases for client_ops == NULL
firmware: cs_dsp: Don't require client to provide a struct cs_dsp_client_ops
ASoC: fsl_micfil: Set channel range control
ASoC: fsl_micfil: Add default quality for different platforms
ASoC: intel: sof_sdw: Add codec_info for cs42l45
ASoC: sdw_utils: Add cs42l45 support functions
ASoC: intel: sof_sdw: Add ability to have auxiliary devices
ASoC: sdw_utils: Move codec_name to dai info
ASoC: sdw_utils: Add codec_conf for every DAI
ASoC: SDCA: Add terminal type into input/output widget name
ASoC: SDCA: Align mute controls to ALSA expectations
...
|
|
The io_uring_queue_async_work tracepoint event stores an int rw field
that represents whether the work item is hashed. Rename it to "hashed"
and change its type to bool to more accurately reflect its value.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 updates from Ted Ts'o:
"New features and improvements for the ext4 file system:
- Optimize online defragmentation by using folios instead of
individual buffer heads
- Improve error codes stored in the superblock when the journal
aborts
- Minor cleanups and clarifications in ext4_map_blocks()
- Add documentation of the casefold and encrypt flags
- Add support for file systems with a blocksize greater than the
pagesize
- Improve performance by enabling the caching the fact that an inode
does not have a Posix ACL
Various Bug Fixes:
- Fix false positive complaints from smatch
- Fix error code which is returned by ext4fs_dirhash() when Siphash
is used without the encryption key
- Fix races when writing to inline data files which could trigger a
BUG
- Fix potential NULL dereference when there is an corrupt file system
with an extended attribute value stored in a inode
- Fix false positive lockdep report when syzbot uses ext4 and ocfs2
together
- Fix false positive reported by DEPT by adjusting lock annotation
- Avoid a potential BUG_ON in jbd2 when a file system is massively
corrupted
- Fix a WARN_ON when superblock is corrupted with a non-NULL
terminated mount options field
- Add check if the userspace passes in a non-NULL terminated mount
options field to EXT4_IOC_SET_TUNE_SB_PARAM
- Fix a potential journal checksum failure whena file system is
copied while it is mounted read-only
- Fix a potential potential orphan file tracking error which only
showed on 32-bit systems
- Fix assertion checks in mballoc (which have to be explicitly enbled
by manually enabling AGGRESSIVE_CHECKS and recompiling)
- Avoid complaining about overly large orphan files created by mke2fs
with with file systems with a 64k block size"
* tag 'ext4_for_linus-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (58 commits)
ext4: mark inodes without acls in __ext4_iget()
ext4: enable block size larger than page size
ext4: add checks for large folio incompatibilities when BS > PS
ext4: support verifying data from large folios with fs-verity
ext4: make data=journal support large block size
ext4: support large block size in __ext4_block_zero_page_range()
ext4: support large block size in mpage_prepare_extent_to_map()
ext4: support large block size in mpage_map_and_submit_buffers()
ext4: support large block size in ext4_block_write_begin()
ext4: support large block size in ext4_mpage_readpages()
ext4: rename 'page' references to 'folio' in multi-block allocator
ext4: prepare buddy cache inode for BS > PS with large folios
ext4: support large block size in ext4_mb_init_cache()
ext4: support large block size in ext4_mb_get_buddy_page_lock()
ext4: support large block size in ext4_mb_load_buddy_gfp()
ext4: add EXT4_LBLK_TO_PG and EXT4_PG_TO_LBLK for block/page conversion
ext4: add EXT4_LBLK_TO_B macro for logical block to bytes conversion
ext4: support large block size in ext4_readdir()
ext4: support large block size in ext4_calculate_overhead()
ext4: introduce s_min_folio_order for future BS > PS support
...
|
|
This patch optimizes the tracepoint by replacing these hardcoded strings
with a new enumeration f2fs_cp_phase.
1.Defines enum f2fs_cp_phase with values for each checkpoint phase.
2.Updates trace_f2fs_write_checkpoint to accept a u16 phase argument
instead of a string pointer.
3.Uses __print_symbolic in TP_printk to convert the enum values
back to their corresponding strings for human-readable trace output.
This change reduces the storage overhead for each trace event
by replacing a variable-length string with a 2-byte integer,
while maintaining the same readable output in ftrace.
Signed-off-by: YH Lin <yhli@google.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
This adds a tracepoint in the fadvise call path.
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
It recommends to use i_size_{read,write}() to access and update i_size,
otherwise, we may get wrong tearing value due to high 32-bits value
and low 32-bits value of i_size field are not updated atomically in
32-bits archicture machine.
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
