| Age | Commit message (Collapse) | Author |
|---|
|
There are GPIO controllers such as the one present in the LX2160ARDB
QIXIS FPGA which have fixed-direction input and output GPIO lines mixed
together in a single register. This cannot be modeled using the
gpio-regmap as-is since there is no way to present the true direction of
a GPIO line.
In order to make this use case possible, add a new configuration
parameter - fixed_direction_output - into the gpio_regmap_config
structure. This will enable user drivers to provide a bitmap that
represents the fixed direction of the GPIO lines.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Michael Walle <mwalle@kernel.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Currently, RISC-V lacks arch-specific registers for CPU topology
properties and must get them from ACPI. Thus, parse_acpi_topology()
is moved from arm64/ to drivers/ for RISC-V reuse.
Signed-off-by: Yunhui Cui <cuiyunhui@bytedance.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://patch.msgid.link/20250923015409.15983-2-cuiyunhui@bytedance.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Replace ERR_PTR() with IOMEM_ERR_PTR() in stubbed ioremap functions to
maintain type consistency. The functions return void __iomem * pointers
and IOMEM_ERR_PTR() provides proper type casting to avoid sparse warnings.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202509060307.JubgnLhc-lkp@intel.com/
Signed-off-by: Pei Xiao <xiaopei01@kylinos.cn>
Link: https://patch.msgid.link/320f2cc9ada5cb66845daa6bf259000b4cffd8b3.1758163939.git.xiaopei01@kylinos.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Because driver core can properly handle constant struct bus_type,
move the rio_bus_type to be a constant structure as well, placing it into
read-only memory which can not be modified at runtime.
Signed-off-by: Adrian Barnaś <abarnas@google.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/20250919073201.751348-1-abarnas@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Because driver core can properly handle constant struct bus_type,
move the eisa_bus_type to be a constant structure as well, placing it into
read-only memory which can not be modified at runtime.
Signed-off-by: Adrian Barnaś <abarnas@google.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/20250919065327.672924-1-abarnas@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Now that the driver core can properly handle constant struct bus_type,
move the cdx_bus_type variable to be a constant structure as well,
placing it into read-only memory which can not be modified at runtime.
Cc: Nipun Gupta <nipun.gupta@amd.com>
Cc: Nikhil Agarwal <nikhil.agarwal@amd.com>
Acked-by: Nipun Gupta <nipun.gupta@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/2025091439-sustained-acorn-4af4@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fix various kernel-doc warnings in ipack.h:
- Remove an empty kernel-doc comment.
- Add 2 missing struct short descriptions.
- Fix a typo in a description.
- Add a missing struct field description.
- Add some missing Return descriptions.
- Clarify one function short description.
Warning: ../include/linux/ipack.h:73 Cannot find identifier on line:
*/
Warning: ../include/linux/ipack.h:74 Cannot find identifier on line:
struct ipack_region {
Warning: ../include/linux/ipack.h:75 Cannot find identifier on line:
phys_addr_t start;
Warning: ../include/linux/ipack.h:76 Cannot find identifier on line:
size_t size;
Warning: ../include/linux/ipack.h:77 Cannot find identifier on line:
};
Warning: ../include/linux/ipack.h:78 Cannot find identifier on line:
Warning: ../include/linux/ipack.h:79 Cannot find identifier on line:
/**
Warning: ipack.h:80 missing initial short description on line:
* struct ipack_device
Warning: ipack.h:163 missing initial short description on line:
* struct ipack_bus_device
Warning: ipack.h:130 struct member 'id_table' not described in 'ipack_driver'
Warning: ipack.h:189 No description found for return value of 'ipack_bus_register'
Warning: ipack.h:194 No description found for return value of 'ipack_bus_unregister' ***
Warning: ipack.h:202 No description found for return value of 'ipack_driver_register'
Warning: ipack.h:221 No description found for return value of 'ipack_device_init'
Warning: ipack.h:236 No description found for return value of 'ipack_device_add'
Warning: ipack.h:271 No description found for return value of 'ipack_get_carrier'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Vaibhav Gupta <vaibhavgupta40@gmail.com>
Link: https://patch.msgid.link/20251016033543.1142049-1-rdunlap@infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Provide empty method for devm_acpm_get_by_node() if we aren't
building in the CONFIG_EXYNOS_ACPM_PROTOCOL. This allows to
test-build the CONFIG_EXYNOS_ACPM_CLK code.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202510211905.RgfWkgss-lkp@intel.com/
Fixes: 40498a742053 ("clk: samsung: add Exynos ACPM clock driver")
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Link: https://patch.msgid.link/20251021-fix-acpm-clk-build-test-v1-1-236a3d6db7f5@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
Peter Wang <peter.wang@mediatek.com says>:
Improves the UFS Mediatek driver by correcting clock scaling with PM
QoS, and adjusting power management flows. It addresses
shutdown/suspend race conditions, and removes redundant
functions. Support for new platforms is added with the MMIO_OTSD_CTRL
register, and MT6991 performance is optimized with MRTT and random
improvements. These changes collectively enhance driver performance,
stability, and compatibility.
Changes since v1:
1. Remove two patches that will be fixed in UFS core.
- ufs: host: mediatek: Fix runtime suspend error deadlock
- ufs: host: mediatek: Enable interrupts for MCQ mode
2. Use hba->shutting_down instead of ufshcd_is_user_access_allowed
v1:
https://patch.msgid.link/20250918104000.208856-1-peter.wang@mediatek.com
Link: https://patch.msgid.link/20250924094527.2992256-1-peter.wang@mediatek.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Remove the duplicate ufs_mtk_us_to_ahit() function in the UFS Mediatek
driver and export the existing ufshcd_us_to_ahit() function for shared
use. This change reduces redundancy and maintains consistency across the
codebase.
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Acked-by: Chun-Hung Wu <chun-hung.wu@mediatek.com>
Link: https://patch.msgid.link/20250924094527.2992256-7-peter.wang@mediatek.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Set the sync length for FASTAUTO G1 mode in the UFS Mediatek
driver. This ensures the sync length meets minimum values for high-speed
gears, improving stability during power mode changes.
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Acked-by: Chun-Hung Wu <chun-hung.wu@mediatek.com>
Link: https://patch.msgid.link/20250924094527.2992256-5-peter.wang@mediatek.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Correct clock scaling with PM QoS during suspend and resume. Ensure PM
QoS is released during suspend if scaling up and re-applied after
resume. This prevents performance issues and maintains proper power
management.
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Acked-by: Chun-Hung Wu <chun-hung.wu@mediatek.com>
Link: https://patch.msgid.link/20250924094527.2992256-2-peter.wang@mediatek.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Add support for Motorcomm YT921x tags, which includes a proper
configurable ethertype field (default to 0x9988).
Signed-off-by: David Yang <mmyangfl@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20251017060859.326450-3-mmyangfl@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Bao D. Nguyen <quic_nguyenb@quicinc.com> says:
Multiple ufs device manufacturers request support for the
UFS_DEVICE_QUIRK_DELAY_AFTER_LPM quirk in the Qualcomm's platform
driver. After checking further with the major UFS manufacturers
engineering teams such as Samsung, Kioxia, SK Hynix and Micron, all
the manufacturers require this quirk. Since the quirk is needed by all
the ufs device manufacturers, remove the quirk in the ufs core driver
and implement a universal delay for all the ufs devices.
In addition to verifying with the public device's datasheets, the ufs
device manufacturer's engineering teams confirmed the required vcc
power-off time for the devices is a minimum of 1ms before vcc can be
powered on again. The existing 5ms delay implemented in the ufs core
driver seems too conservative, so replace the hard coded 5ms delay
with a variable default to 2ms setting to improve the system resume
latency. The platform drivers can override this setting as needed.
Link: https://patch.msgid.link/cover.1760383740.git.quic_nguyenb@quicinc.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
After the UFS device VCC is powered off, all the UFS device
manufacturers require a minimum of 1ms of power-off time before VCC can
be powered on again. This requirement has been verified with all the UFS
device manufacturer's datasheets.
Replace the hard coded 5ms delay with a variable with a default setting
of 2ms to improve the system resume latency. The platform drivers can
override this setting as needed.
Signed-off-by: Bao D. Nguyen <quic_nguyenb@quicinc.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Link: https://patch.msgid.link/72fa649406a0bf02271575b7d58f22c968aa5d7e.1760383740.git.quic_nguyenb@quicinc.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
After the UFS device VCC is turned off, all the UFS device manufacturers
require a period of power-off time before the VCC can be turned on
again. This requirement has been confirmed with all the UFS device
manufacturer's datasheets.
Remove the UFS_DEVICE_QUIRK_DELAY_AFTER_LPM quirk in the UFS core driver
and implement a universal delay that is required by all the UFS device
manufacturers. In addition, remove the support for this quirk in the
platform drivers.
Signed-off-by: Bao D. Nguyen <quic_nguyenb@quicinc.com>
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/25f134d5a42e8b8365be64d512d1bb5fc2bce6ff.1760383740.git.quic_nguyenb@quicinc.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Update the completion queue (CQ) entry format according to the UFS 4.1
specification. UFS 4.1 introduces new members in reserved record
DW5. Also refine DW4 with detailed members defined in UFS 4.0. Modify
the code to incorporate these changes by updating the overall_status in
the CQ entry structure.
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20251016023507.1000664-2-peter.wang@mediatek.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
This change allows removing multiple casts and hence improves type
checking by the compiler.
Cc: Hannes Reinecke <hare@suse.de>
Suggested-by: John Garry <john.g.garry@oracle.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Link: https://patch.msgid.link/20251014220426.3690007-1-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
scsi_decide_disposition() may call scsi_check_sense().
scsi_decide_disposition() calls are not serialized. Hence, counter
updates by scsi_check_sense() must be serialized. Hence this patch that
makes the counters updated by scsi_check_sense() atomic.
Cc: Kai Mäkisara <Kai.Makisara@kolumbus.fi>
Fixes: a5d518cd4e3e ("scsi: core: Add counters for New Media and Power On/Reset UNIT ATTENTIONs")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Link: https://patch.msgid.link/20251014220244.3689508-1-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Some high level software drivers need to compute features from lower
devices. But each has their own implementations and may lost some
feature compute. Let's use one common function to compute features
for kinds of these devices.
The new helper uses the current bond implementation as the reference
one, as the latter already handles all the relevant aspects: netdev
features, TSO limits and dst retention.
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://patch.msgid.link/20251017034155.61990-2-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The bpf_insn_successors() function is used to return successors
to a BPF instruction. So far, an instruction could have 0, 1 or 2
successors. Prepare the verifier code to introduction of instructions
with more than 2 successors (namely, indirect jumps).
To do this, introduce a new struct, struct bpf_iarray, containing
an array of bpf instruction indexes and make bpf_insn_successors
to return a pointer of that type. The storage for all instructions
is allocated in the env->succ, which holds an array of size 2,
to be used for all instructions.
Signed-off-by: Anton Protopopov <a.s.protopopov@gmail.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20251019202145.3944697-10-a.s.protopopov@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The kernel/bpf/array.c file defines the array_map_get_next_key()
function which finds the next key for array maps. It actually doesn't
use any map fields besides the generic max_entries field. Generalize
it, and export as bpf_array_get_next_key() such that it can be
re-used by other array-like maps.
Signed-off-by: Anton Protopopov <a.s.protopopov@gmail.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20251019202145.3944697-4-a.s.protopopov@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Introduce a new subprog_start field in bpf_prog_aux. This field may
be used by JIT compilers wanting to know the real absolute xlated
offset of the function being jitted. The func_info[func_id] may have
served this purpose, but func_info may be NULL, so JIT compilers
can't rely on it.
Signed-off-by: Anton Protopopov <a.s.protopopov@gmail.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20251019202145.3944697-3-a.s.protopopov@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Merge series from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>:
We would like to hide struct snd_soc_dapm_context from driver. So we need
cleanup code first. Current ASoC have very similar functions (A)(B).
(A) snd_soc_kcontrol_component()
(B) snd_soc_dapm_kcontrol_component()
(B) is using very picky way to get component but using it is necessary in
ASoC. But (A) is just wrapper function to snd_kcontrol_chip(), and directly
using it without wrapper is very common way on ALSA.
This patch-set doesn't merge patches for each vender etc, because it makes
backport difficult.
|
|
Merge series from Simon Trimmer <simont@opensource.cirrus.com>:
This series of two patches propagates the PCI subsystem Vendor and Device
IDs so that they can be used by component drivers to differentiate
firmware loads.
|
|
There are 3 sub-devices for which the drivers will be added in
subsequent patches.
Signed-off-by: Samuel Kayode <samuel.kayode@savoirfairelinux.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Tested-by: Sean Nyekjaer <sean@geanix.com>
Link: https://patch.msgid.link/20251001-pf1550-v12-2-a3302aa41687@savoirfairelinux.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
UDP TX packets destructor is sock_wfree().
It suffers from a cache line bouncing in sock_def_write_space_wfree().
Instead of reading sk->sk_wmem_alloc after we just did an atomic RMW
on it, use __refcount_sub_and_test() to get the old value for free,
and pass the new value to sock_def_write_space_wfree().
Add __sock_writeable() helper.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20251017133712.2842665-1-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add constants for voltage levels: LOW_SVS_D2_1, LOW_SVS_D1_1 and
LOW_SVS_L0.
Signed-off-by: Jishnu Prakash <jishnu.prakash@oss.qualcomm.com>
Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
The read_seqbegin/need_seqretry/done_seqretry API is cumbersome and
error prone. With the new helper the "typical" code like
int seq, nextseq;
unsigned long flags;
nextseq = 0;
do {
seq = nextseq;
flags = read_seqbegin_or_lock_irqsave(&seqlock, &seq);
// read-side critical section
nextseq = 1;
} while (need_seqretry(&seqlock, seq));
done_seqretry_irqrestore(&seqlock, seq, flags);
can be rewritten as
scoped_seqlock_read (&seqlock, ss_lock_irqsave) {
// read-side critical section
}
Original idea by Oleg Nesterov; with contributions from Linus.
Originally-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
|
|
The 'old' argument in atomic_try_cmpxchg() and related functions is a
pointer to a normal non-atomic integer number, which does not require
to be naturally aligned, unlike the atomic_t/atomic64_t types themselves.
In order to add an alignment check with CONFIG_DEBUG_ATOMIC into the
normal instrument_atomic_read_write() helper, change this check to use
the non-atomic instrument_read_write(), the same way that was done
earlier for try_cmpxchg() in commit ec570320b09f ("locking/atomic:
Correct (cmp)xchg() instrumentation").
This prevents warnings on m68k calling the 32-bit atomic_try_cmpxchg()
with 16-bit aligned arguments as well as several more architectures
including x86-32 when calling atomic64_try_cmpxchg() with 32-bit
aligned u64 arguments.
Reported-by: Finn Thain <fthain@linux-m68k.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/all/cover.1757810729.git.fthain@linux-m68k.org/
|
|
Reading the GPIO hardware number from a descriptor is a valid use-case
outside of the GPIO core. Export the symbol to consumers of GPIO
descriptors.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Link: https://lore.kernel.org/r/20251016-aspeed-gpiolib-include-v1-2-31201c06d124@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Sumanth Korikkar says:
====================
Provide a new interface for dynamic configuration and
deconfiguration of hotplug memory on s390, allowing with/without
memmap_on_memory support. It is a follow up on the discussion with David
when introducing memmap_on_memory support for s390 and support dynamic
(de)configuration of memory:
https://lore.kernel.org/all/ee492da8-74b4-4a97-8b24-73e07257f01d@redhat.com/
https://lore.kernel.org/all/20241202082732.3959803-1-sumanthk@linux.ibm.com/
The original motivation for introducing memmap_on_memory on s390 was to
avoid using online memory to store struct pages metadata, particularly
for standby memory blocks. This became critical in cases where there was
an imbalance between standby and online memory, potentially leading to
boot failures due to insufficient memory for metadata allocation.
To address this, memmap_on_memory was utilized on s390. However, in its
current form, it adds struct pages metadata at the start of each memory
block at the time of addition (only standby memory), and this
configuration is static. It cannot be changed at runtime (When the user
needs continuous physical memory).
Inorder to provide more flexibility to the user and overcome the above
limitation, add an option to dynamically configure and deconfigure
hotpluggable memory block with/without memmap_on_memory.
With the new interface, s390 will not add all possible hotplug memory in
advance, like before, to make it visible in sysfs for online/offline
actions. Instead, before memory block can be set online, it has to be
configured via a new interface in /sys/firmware/memory/memoryX/config,
which makes s390 similar to others. i.e. Adding of hotpluggable memory is
controlled by the user instead of adding it at boottime.
s390 kernel sysfs interface to configure/deconfigure memory with
memmap_on_memory (with upcoming lsmem changes):
* Initial memory layout:
lsmem -o RANGE,SIZE,STATE,BLOCK,CONFIGURED,MEMMAP_ON_MEMORY
RANGE SIZE STATE BLOCK CONFIGURED MEMMAP_ON_MEMORY
0x00000000-0x7fffffff 2G online 0-15 yes no
0x80000000-0xffffffff 2G offline 16-31 no yes
* Configure memory
echo 1 > /sys/firmware/memory/memory16/config
lsmem -o RANGE,SIZE,STATE,BLOCK,CONFIGURED,MEMMAP_ON_MEMORY
RANGE SIZE STATE BLOCK CONFIGURED MEMMAP_ON_MEMORY
0x00000000-0x7fffffff 2G online 0-15 yes no
0x80000000-0x87ffffff 128M offline 16 yes yes
0x88000000-0xffffffff 1.9G offline 17-31 no yes
* Deconfigure memory
echo 0 > /sys/firmware/memory/memory16/config
lsmem -o RANGE,SIZE,STATE,BLOCK,CONFIGURED,MEMMAP_ON_MEMORY
RANGE SIZE STATE BLOCK CONFIGURED MEMMAP_ON_MEMORY
0x00000000-0x7fffffff 2G online 0-15 yes no
0x80000000-0xffffffff 2G offline 16-31 no yes
* Enable memmap_on_memory and online it.
(Deconfigure first)
echo 0 > /sys/devices/system/memory/memory5/online
echo 0 > /sys/firmware/memory/memory5/config
lsmem -o RANGE,SIZE,STATE,BLOCK,CONFIGURED,MEMMAP_ON_MEMORY
RANGE SIZE STATE BLOCK CONFIGURED MEMMAP_ON_MEMORY
0x00000000-0x27ffffff 640M online 0-4 yes no
0x28000000-0x2fffffff 128M offline 5 no no
0x30000000-0x7fffffff 1.3G online 6-15 yes no
0x80000000-0xffffffff 2G offline 16-31 no yes
(Enable memmap_on_memory and online it)
echo 1 > /sys/firmware/memory/memory5/memmap_on_memory
echo 1 > /sys/firmware/memory/memory5/config
echo 1 > /sys/devices/system/memory/memory5/online
lsmem -o RANGE,SIZE,STATE,BLOCK,CONFIGURED,MEMMAP_ON_MEMORY
RANGE SIZE STATE BLOCK CONFIGURED MEMMAP_ON_MEMORY
0x00000000-0x27ffffff 640M online 0-4 yes no
0x28000000-0x2fffffff 128M online 5 yes yes
0x30000000-0x7fffffff 1.3G online 6-15 yes no
0x80000000-0xffffffff 2G offline 16-31 no yes
* Disable memmap_on_memory and online it.
(Deconfigure first)
echo 0 > /sys/devices/system/memory/memory5/online
echo 0 > /sys/firmware/memory/memory5/config
lsmem -o RANGE,SIZE,STATE,BLOCK,CONFIGURED,MEMMAP_ON_MEMORY
RANGE SIZE STATE BLOCK CONFIGURED MEMMAP_ON_MEMORY
0x00000000-0x27ffffff 640M online 0-4 yes no
0x28000000-0x2fffffff 128M offline 5 no yes
0x30000000-0x7fffffff 1.3G online 6-15 yes no
0x80000000-0xffffffff 2G offline 16-31 no yes
(Disable memmap_on_memory and online it)
echo 0 > /sys/firmware/memory/memory5/memmap_on_memory
echo 1 > /sys/firmware/memory/memory5/config
echo 1 > /sys/devices/system/memory/memory5/online
lsmem -o RANGE,SIZE,STATE,BLOCK,CONFIGURED,MEMMAP_ON_MEMORY
RANGE SIZE STATE BLOCK CONFIGURED MEMMAP_ON_MEMORY
0x00000000-0x7fffffff 2G online 0-15 yes no
0x80000000-0xffffffff 2G offline 16-31 no yes
* Userspace changes:
lsmem/chmem tool is also changed to use the new interface. I will send
it to util-linux soon.
Patch 1 adds support for removal of boot-allocated memory blocks.
Patch 2 provides option to dynamically configure and deconfigure memory
with/without memmap_on_memory.
Patch 3 removes MHP_OFFLINE_INACCESSIBLE from s390. The mhp flag was
used to mark memory as not accessible until memory hotplug online phase
begins. However, with patch 2, it is no longer essential. Memory can be
brought to accessible state before adding memory, as the memory is added
during runttime now instead of boottime.
Patch 4 removes the MEM_PREPARE_ONLINE/MEM_FINISH_OFFLINE notifiers. It
is no longer needed. Memory can be brought to accessible state before
adding memory now, with runtime (de)configuration of memory.
Note: The patches apply to the linux-next branch.
v3:
Thanks David
* Avoid goto label in create_standby_sclp_mems().
* Use unsigned long instead of u64.
* Add Acked-by.
v2:
Thanks David
* Rename struct mblock/mblock_arg with struct sclp_mem/sclp_mem_arg.
* Rename all mblocks/mblock references with sclp_mems/sclp_mem -
structures, functions.
* Rename create_online_mblock() with create_configured_sclp_mem().
* Rename config_mblock_show()/config_mblock_store() with
config_sclp_mem_show()/config_sclp_mem_store().
* Remove contains_standby_increment() and
sclp_mem_notifier. sclp mem state change is performed when
adding/removing memory. sclp memory notifier - no longer needed with
this patchset.
* Recover sclp mem state when add_memory() fails.
* Refactor and add function init_sclp_mem().
* Use unsigned long instead of unsigned long long.
* Simplify and correct kobj handling. Thanks Heiko.
====================
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-next
drm-misc-next for v6.19:
UAPI Changes:
Cross-subsystem Changes:
- fbcon cleanups.
- Make drivers depend on FB_TILEBLITTING instead of selecting it,
and hide FB_MODE_HELPERS.
Core Changes:
- More preparations for rust.
- Throttle dirty worker with vblank
- Use drm_for_each_bridge_in_chain_scoped in drm's bridge code and
assorted fixes.
- Ensure drm_client_modeset tests are enabled in UML.
- Rename ttm_bo_put to ttm_bo_fini, as a further step in removing the
TTM bo refcount.
- Add POST_LT_ADJ_REQ training sequence.
- Show list of removed but still allocated bridges.
- Add a simulated vblank interrupt for hardware without it,
and add some helpers to use them in vkms and hypervdrm.
Driver Changes:
- Assorted small fixes, cleanups and updates to host1x, tegra,
panthor, amdxdna, gud, vc4, ssd130x, ivpu, panfrost, panthor,
sysfb, bridge/sn65dsi86, solomon, ast, tidss.
- Convert drivers from using .round_rate() to .determine_rate()
- Add support for KD116N3730A07/A12, chromebook mt8189, JT101TM023,
LQ079L1SX01, raspberrypi 5" panels.
- Improve reclocking on tegra186+ with nouveau.
- Improve runtime pm in amdxdna.
- Add support for HTX_PAI in imx.
- Use a helper to calculate dumb buffer sizes in most drivers.
Signed-off-by: Simona Vetter <simona.vetter@ffwll.ch>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://lore.kernel.org/r/b412fb91-8545-466a-8102-d89c0f2758a7@linux.intel.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next
Marc Kleine-Budde says:
====================
pull-request: can-next 2025-10-17
The first patch is by me and adds support for an optional reset to the
m_can drivers.
Vincent Mailhol's patch targets all drivers and removes the
can_change_mtu() function, since the netdev's min and max MTU are
populated.
Markus Schneider-Pargmann contributes 4 patches to the m_can driver to
add am62 wakeup support.
The last 7 patches are by me and provide various cleanups to the m_can
driver.
* tag 'linux-can-next-for-6.19-20251017' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next:
can: m_can: m_can_get_berr_counter(): don't wake up controller if interface is down
can: m_can: m_can_tx_submit(): remove unneeded sanity checks
can: m_can: m_can_class_register(): remove error message in case devm_kzalloc() fails
can: m_can: m_can_interrupt_enable(): use m_can_write() instead of open coding it
net: m_can: convert dev_{dbg,info,err} -> netdev_{dbg,info,err}
can: m_can: hrtimer_callback(): rename to m_can_polling_timer()
can: m_can: m_can_init_ram(): make static
can: m_can: Support pinctrl wakeup state
can: m_can: Return ERR_PTR on error in allocation
can: m_can: Map WoL to device_set_wakeup_enable
dt-bindings: can: m_can: Add wakeup properties
can: treewide: remove can_change_mtu()
can: m_can: add support for optional reset
====================
Link: https://patch.msgid.link/20251017150819.1415685-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://gitlab.freedesktop.org/drm/xe/kernel into drm-next
Highlights:
UAPI Changes:
Loosen used tracking restriction (Matthew Auld)
New SR-IOV debugfs structure and debugfs updates (Michal Wajdeczko)
Hide the GPU madvise flag behind a VM_BIND flag (Thomas Hellström)
Always expose VRAM provisioning data on discrete GPUs (Lukasz Laguna)
Cross-subsystem Changes:
Allow VRAM mappings for userptr when used with SVM (Matthew Brost)
Driver Changes:
Allow pinning of p2p dma-buf (Thomas Hellstrom)
Use per-tile debugfs where appropriate (Michal Wajdeczko)
Add documentation for Execution Queues (Niranjana Vishwanathapura)
PF improvements (Michal Wajdeczko)
VF migration recovery redesign work (Matthew Brost)
User / Kernel VRAM partitioning (Piotr Piórkowski)
Update Tile-based messages (Michal Wajdeczko)
Allow configfs to disable specific GT types (Matt Roper)
VF provisioning improvements (Michal Wajdeczko)
Initial Xe3P support (Various people)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Hellstrom <thomas.hellstrom@linux.intel.com>
Link: https://lore.kernel.org/r/aPXzbOb7eGbkgMrr@fedora
|
|
Changing the netif_carrier_*() state behind phylink's back has always
been prohibited because it messes up with phylinks state tracking, and
means that phylink no longer guarantees to call the mac_link_down()
and mac_link_up() methods at the appropriate times. This was later
documented in the sfp-phylink network driver conversion guide.
stmmac was converted to phylink in 2019, but nothing was done with the
"PCS" code. Since then, apart from the updates as part of phylink
development, nothing has happened with stmmac to improve its use of
phylink, or even to address this point.
A couple of years ago, a has_integrated_pcs boolean was added by Bart,
which later became the STMMAC_FLAG_HAS_INTEGRATED_PCS flag, to avoid
manipulating the netif_carrier_*() state. This flag is mis-named,
because whenever the stmmac is synthesized for its native SGMII, TBI
or RTBI interfaces, it has an "integrated PCS". This boolean/flag
actually means "ignore the status from the integrated PCS".
Discussing with Bart, the reasons for this are lost to the winds of
time (which is why we should always document the reasons in the commit
message.)
RGMII also has in-band status, and the dwmac cores and stmmac code
supports this but with one bug that saves the day.
When dwmac cores are synthesised for RGMII only, they do not contain
an integrated PCS, and so priv->dma_cap.pcs is clear, which prevents
(incorrectly) the "RGMII PCS" being used, meaning we don't read the
in-band status. However, a core synthesised for RGMII and also SGMII,
TBI or RTBI will have this capability bit set, thus making these
code paths reachable.
The Jetson Xavier NX uses RGMII mode to talk to its PHY, and removing
the incorrect check for priv->dma_cap.pcs reveals the theortical issue
with netif_carrier_*() manipulation is real:
dwc-eth-dwmac 2490000.ethernet eth0: Register MEM_TYPE_PAGE_POOL RxQ-0
dwc-eth-dwmac 2490000.ethernet eth0: PHY [stmmac-0:00] driver [RTL8211F Gigabit Ethernet] (irq=141)
dwc-eth-dwmac 2490000.ethernet eth0: No Safety Features support found
dwc-eth-dwmac 2490000.ethernet eth0: IEEE 1588-2008 Advanced Timestamp supported
dwc-eth-dwmac 2490000.ethernet eth0: registered PTP clock
dwc-eth-dwmac 2490000.ethernet eth0: configuring for phy/rgmii-id link mode
8021q: adding VLAN 0 to HW filter on device eth0
dwc-eth-dwmac 2490000.ethernet eth0: Adding VLAN ID 0 is not supported
Link is Up - 1000/Full
Link is Down
Link is Up - 1000/Full
This looks good until one realises that the phylink "Link" status
messages are missing, even when the RJ45 cable is reconnected. Nothing
one can do results in the interface working. The interrupt handler
(which prints those "Link is" messages) always wins over phylink's
resolve worker, meaning phylink never calls the mac_link_up() nor
mac_link_down() methods.
eth0 also sees no traffic received, and is unable to obtain a DHCP
address:
3: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group defa
ult qlen 1000
link/ether e6:d3:6a:e6:92:de brd ff:ff:ff:ff:ff:ff
RX: bytes packets errors dropped overrun mcast
0 0 0 0 0 0
TX: bytes packets errors dropped carrier collsns
27686 149 0 0 0 0
With the STMMAC_FLAG_HAS_INTEGRATED_PCS flag set, which disables the
netif_carrier_*() manipulation then stmmac works normally:
dwc-eth-dwmac 2490000.ethernet eth0: Register MEM_TYPE_PAGE_POOL RxQ-0
dwc-eth-dwmac 2490000.ethernet eth0: PHY [stmmac-0:00] driver [RTL8211F Gigabit Ethernet] (irq=141)
dwc-eth-dwmac 2490000.ethernet eth0: No Safety Features support found
dwc-eth-dwmac 2490000.ethernet eth0: IEEE 1588-2008 Advanced Timestamp supported
dwc-eth-dwmac 2490000.ethernet eth0: registered PTP clock
dwc-eth-dwmac 2490000.ethernet eth0: configuring for phy/rgmii-id link mode
8021q: adding VLAN 0 to HW filter on device eth0
dwc-eth-dwmac 2490000.ethernet eth0: Adding VLAN ID 0 is not supported
Link is Up - 1000/Full
dwc-eth-dwmac 2490000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
and packets can be transferred.
This clearly shows that when priv->hw->pcs is set, but
STMMAC_FLAG_HAS_INTEGRATED_PCS is clear, the driver reliably fails.
Discovering whether a platform falls into this is impossible as
parsing all the dtsi and dts files to find out which use the stmmac
driver, whether any of them use RGMII or SGMII and also depends
whether an external interface is being used. The kernel likely
doesn't contain all dts files either.
The only driver that sets this flag uses the qcom,sa8775p-ethqos
compatible, and uses SGMII or 2500BASE-X.
but these are saved from this problem by the incorrect check for
priv->dma_cap.pcs.
So, we have to assume that for every other platform that uses SGMII
with stmmac is using an external PCS.
Moreover, ethtool output can be incorrect. With the full-duplex link
negotiated, ethtool reports:
Speed: 1000Mb/s
Duplex: Half
because with dwmac4, the full-duplex bit is in bit 16 of the status,
priv->xstats.pcs_duplex becomes BIT(16) for full duplex, but the
ethtool ksettings duplex member is u8 - so becomes zero. Moreover,
the supported, advertised and link partner modes are all "not
reported".
Finally, ksettings_set() won't be able to set the advertisement on
a PHY if this PCS code is activated, which is incorrect when SGMII
is used with a PHY.
Thus, remove:
1. the incorrect netif_carrier_*() manipulation.
2. the broken ethtool ksettings code.
Given that all uses of STMMAC_FLAG_HAS_INTEGRATED_PCS are now gone,
remove the flag from stmmac.h and dwmac-qcom-ethqos.c.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Tested-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://patch.msgid.link/E1v9P5y-0000000AolC-1QWH@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Correct multiple kernel-doc warnings in nl802154.h:
- Fix a typo on one enum name to avoid a kernel-doc warning.
- Drop 2 enum descriptions that are no longer needed.
- Mark 2 internal enums as "private:" so that kernel-doc is not needed
for them.
Warning: nl802154.h:239 Enum value 'NL802154_CAP_ATTR_MAX_MAXBE' not described in enum 'nl802154_wpan_phy_capability_attr'
Warning: nl802154.h:239 Excess enum value '%NL802154_CAP_ATTR_MIN_CCA_ED_LEVEL' description in 'nl802154_wpan_phy_capability_attr'
Warning: nl802154.h:239 Excess enum value '%NL802154_CAP_ATTR_MAX_CCA_ED_LEVEL' description in 'nl802154_wpan_phy_capability_attr'
Warning: nl802154.h:369 Enum value '__NL802154_CCA_OPT_ATTR_AFTER_LAST' not described in enum 'nl802154_cca_opts'
Warning: nl802154.h:369 Enum value 'NL802154_CCA_OPT_ATTR_MAX' not described in enum 'nl802154_cca_opts'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20251016035917.1148012-1-rdunlap@infradead.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The madvise implementation currently resets the SVM madvise if the
underlying CPU map is unmapped. This is in an attempt to mimic the
CPU madvise behaviour. However, it's not clear that this is a desired
behaviour since if the end app user relies on it for malloc()ed
objects or stack objects, it may not work as intended.
Instead of having the autoreset functionality being a direct
application-facing implicit UAPI, make the UMD explicitly choose
this behaviour if it wants to expose it by introducing
DRM_XE_VM_BIND_FLAG_MADVISE_AUTORESET, and add a semantics
description.
v2:
- Kerneldoc fixes. Fix a commit log message.
Fixes: a2eb8aec3ebe ("drm/xe: Reset VMA attributes to default in SVM garbage collector")
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Cc: "Falkowski, John" <john.falkowski@intel.com>
Cc: "Mrozek, Michal" <michal.mrozek@intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Link: https://lore.kernel.org/r/20251015170726.178685-2-thomas.hellstrom@linux.intel.com
(cherry picked from commit 59a2d3f38ab23cce4cd9f0c4a5e08fdfe9e67ae7)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup fixes from Tejun Heo:
- Fix seqcount lockdep assertion failure in cgroup freezer on
PREEMPT_RT.
Plain seqcount_t expects preemption disabled, but PREEMPT_RT
spinlocks don't disable preemption. Switch to seqcount_spinlock_t to
properly associate css_set_lock with the freeze timing seqcount.
- Misc changes including kernel-doc warning fix for misc_res_type enum
and improved selftest diagnostics.
* tag 'cgroup-for-6.18-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup/misc: fix misc_res_type kernel-doc warning
selftests: cgroup: Use values_close_report in test_cpu
selftests: cgroup: add values_close_report helper
cgroup: Fix seqcount lockdep assertion in cgroup freezer
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull fsnotify fixes from Jan Kara:
- Stop-gap solution for a race between unmount of a filesystem with
fsnotify marks and someone inspecting fdinfo of fsnotify group with
those marks in procfs.
A proper solution is in the works but it will get a while to settle.
- Fix for non-decodable file handles (used by unprivileged apps using
fanotify)
* tag 'fsnotify_for_v6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
fs/notify: call exportfs_encode_fid with s_umount
expfs: Fix exportfs_can_encode_fh() for EXPORT_FH_FID
|
|
Drop unused function acpi_get_lps0_constraint().
No functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Link: https://patch.msgid.link/5032801.GXAFRqVoOG@rafael.j.wysocki
|
|
sysctl_hung_task_timeout_secs)
When a writeback work lasts for sysctl_hung_task_timeout_secs, we want
to identify that there are tasks waiting for a long time-this helps us
pinpoint potential issues.
Additionally, recording the starting jiffies is useful when debugging a
crashed vmcore.
Signed-off-by: Julian Sun <sunjunchao@bytedance.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Writing back a large number of pages can take a lots of time.
This issue is exacerbated when the underlying device is slow or
subject to block layer rate limiting, which in turn triggers
unexpected hung task warnings.
We can trigger a wake-up once a chunk has been written back and the
waiting time for writeback exceeds half of
sysctl_hung_task_timeout_secs.
This action allows the hung task detector to be aware of the writeback
progress, thereby eliminating these unexpected hung task warnings.
This patch has passed the xfstests 'check -g quick' test based on ext4,
with no additional failures introduced.
Signed-off-by: Julian Sun <sunjunchao@bytedance.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
... to make sure all accesses are properly validated.
Merely renaming the var to __i_state still lets the compiler make the
following suggestion:
error: 'struct inode' has no member named 'i_state'; did you mean '__i_state'?
Unfortunately some people will add the __'s and call it a day.
In order to make it harder to mess up in this way, hide it behind a
struct. The resulting error message should be convincing in terms of
checking what to do:
error: invalid operands to binary & (have 'struct inode_state_flags' and 'int')
Of course people determined to do a plain access can still do it, but
nothing can be done for that case.
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
coccinelle
Nothing to look at apart from iput_final().
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Open-coded accesses prevent asserting they are done correctly. One
obvious aspect is locking, but significantly more can checked. For
example it can be detected when the code is clearing flags which are
already missing, or is setting flags when it is illegal (e.g., I_FREEING
when ->i_count > 0).
In order to keep things manageable this patchset merely gets the thing
off the ground with only lockdep checks baked in.
Current consumers can be trivially converted.
Suppose flags I_A and I_B are to be handled.
If ->i_lock is held, then:
state = inode->i_state => state = inode_state_read(inode)
inode->i_state |= (I_A | I_B) => inode_state_set(inode, I_A | I_B)
inode->i_state &= ~(I_A | I_B) => inode_state_clear(inode, I_A | I_B)
inode->i_state = I_A | I_B => inode_state_assign(inode, I_A | I_B)
If ->i_lock is not held or only held conditionally:
state = inode->i_state => state = inode_state_read_once(inode)
inode->i_state |= (I_A | I_B) => inode_state_set_raw(inode, I_A | I_B)
inode->i_state &= ~(I_A | I_B) => inode_state_clear_raw(inode, I_A | I_B)
inode->i_state = I_A | I_B => inode_state_assign_raw(inode, I_A | I_B)
The "_once" vs "_raw" discrepancy stems from the read variant differing
by READ_ONCE as opposed to just lockdep checks.
Finally, if you want to atomically clear flags and set new ones, the
following:
state = inode->i_state;
state &= ~I_A;
state |= I_B;
inode->i_state = state;
turns into:
inode_state_replace(inode, I_A, I_B);
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
The incomming helpers don't ship with _release/_acquire variants, for
the time being anyway.
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
The only consumer outside of fs/inode.c is gfs2 and it already includes
fs.h in the relevant file.
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Suppose there are 2 CPUs racing inode hash lookup func (say ilookup5())
and unlock_new_inode().
In principle the latter can clear the I_NEW flag before prior stores
into the inode were made visible.
The former can in turn observe I_NEW is cleared and proceed to use the
inode, while possibly reading from not-yet-published areas.
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Also remove the now redundant comment.
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
