| Age | Commit message (Collapse) | Author |
|
The compiler attribute __counted_by_ptr associates a pointer field of a
struct with a sibling field within the same struct that specifies the
element count of the allocated memory. This enables KASAN and fortified
bounds-checking to detect out-of-bounds accesses to the pointer field at
runtime.
We can add the __counted_by_ptr attribute to the 'forward' and 'reverse'
pointer fields of 'struct uid_gid_map', which are counted by
'nr_extents'. Since 'nr_extents' is defined in a sibling anonymous
struct inside an anonymous union, the nearest common non-anonymous
struct level is 'struct uid_gid_map' itself, which is supported by the
compiler.
However, doing so has runtime implications. In the original
implementation of insert_extent(), elements are written to
map->forward[map->nr_extents] before map->nr_extents is incremented:
if (map->nr_extents < UID_GID_MAP_MAX_BASE_EXTENTS)
dest = &map->extent[map->nr_extents];
else
dest = &map->forward[map->nr_extents];
*dest = *extent;
map->nr_extents++;
At the time of writing to 'map->forward[map->nr_extents]',
map->nr_extents is still 5, but we are accessing index 5 (which is the
6th element). Under __counted_by_ptr(nr_extents), the compiler and
KASAN expect the accessed index to be strictly less than
map->nr_extents. Therefore, accessing index 5 when the count is 5
triggers an out-of-bounds panic/trap at runtime.
To resolve this, insert_extent() is refactored to increment
map->nr_extents first, and then use map->nr_extents - 1 as the index:
map->nr_extents++;
if (map->nr_extents <= UID_GID_MAP_MAX_BASE_EXTENTS)
dest = &map->extent[map->nr_extents - 1];
else
dest = &map->forward[map->nr_extents - 1];
*dest = *extent;
Signed-off-by: Bill Wendling <morbo@google.com>
Link: https://patch.msgid.link/20260908222734.3048684-1-morbo@google.com
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Bradley Morgan <brads@mainlining.org>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
|
|
Add definitions and documentation for the custom control provided
by the DCMIPP driver in order to control the pixelproc gamma
correction.
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
x86 implements page attribute modification using its Change Page
Attributes (CPA) mechanism.
This tracks properties of ranges such as cache mode through x86 page
attributes, and as part of that logic manipulates kernel page tables.
Since commit:
41d88484c71c ("x86/mm/pat: restore large ROX pages after fragmentation")
ranges of kernel page table entries can be collapsed into
huge page table entries as part of this logic.
As part of this collapse, it frees the page tables which the collapsed
entries previously pointed to, and it does so without any relevant locks
being held to preclude concurrent kernel page table walkers.
The only way this code can be reached is if CPA_COLLAPSE is specified, and
this is only set in set_memory_rox() via:
set_memory_rox()
-> change_page_attr_set_clr()
-> cpa_flush()
-> cpa_collapse_large_pages()
Notable users of this are execmem and BPF when manipulating executable
mappings.
However, this is problematic for ptdump as it walks ranges it does not own
and thus runs the risk of a use-after-free on page tables freed underneath
it.
In addition, concurrent CPA collapse operations are possible which can also
cause races.
Resolve the issue by acquiring the mmap write lock on init_mm across the
whole operation.
It is safe to acquire a sleeping lock as all the callers invoke
set_memory_rox() from process context and in any case,
change_page_attr_set_clr() calls vm_unmap_alias() which ultimately takes a
mutex, disallowing atomic context here.
Fixes: 41d88484c71c ("x86/mm/pat: restore large ROX pages after fragmentation")
Signed-off-by: Lorenzo Stoakes (ARM) <ljs@kernel.org>
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Reviewed-by: Kiryl Shutsemau (Meta) <kas@kernel.org>
Reviewed-by: David Hildenbrand (Arm) <david@kernel.org>
Reviewed-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Will Deacon <will@kernel.org>
Reviewed-by: David Carlier <devnexen@gmail.com>
Tested-by: Atish Patra <atishp@meta.com>
Tested-by: Nikunj A Dadhania <nikunj@amd.com>
Cc:stable@vger.kernel.org
Link: https://patch.msgid.link/20260813-cpa-fixes-v2-1-39b4ff90f91d@kernel.org
|
|
When WARN_ON_ONCE() wraps a conditional lock acquisition (such as
down_write_trylock()) on architectures relying on DO_ONCE_LITE_IF()
(e.g. arm), Clang's context analysis (Thread Safety Analysis) failed
with a false positive:
fs/ext2/xattr.c:825:6: error: rw_semaphore 'EXT2_I().xattr_sem' is not held on every path through here [-Werror,-Wthread-safety-analysis]
825 | if (WARN_ON_ONCE(!down_write_trylock(&EXT2_I(inode)->xattr_sem)))
| ^
This happens because DO_ONCE_LITE_IF() branches on __ONCE_LITE_IF()'s
return value (__ret_once), creating an intermediate branch merge point
where the lock may or may not be held depending on whether the once-flag
(__already_done) was already set. Because the merge branch condition is
__ret_once rather than the trylock predicate (__ret_do_once), Clang
cannot reconcile the lockset at the branch merge points.
Fix it by refactoring __ONCE_LITE_IF() into an unconditional
__ONCE_LITE() primitive and redefining __ONCE_LITE_IF(condition) as:
(unlikely(condition) && __ONCE_LITE())
This simplifies the implementation, short-circuits evaluation so that
__ONCE_LITE() is not called when the condition is false, and ensures
that DO_ONCE_LITE_IF() only enters __ONCE_LITE() when __ret_do_once is
true.
Reported-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/all/20260903072759.GA1750084@ax162/
Signed-off-by: Marco Elver <elver@google.com>
Tested-by: Nathan Chancellor <nathan@kernel.org> # build
Link: https://patch.msgid.link/20260903101843.3462767-1-elver@google.com
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter/IPVS fixes for net
The following patchset contains Netfilter/IPVS fixes for net:
1) Reject malformed messages in IPVS sync, from Kyle Zeng.
2) Fix possible stale infoleak in IPVS sync, also from Kyle Zeng.
3) Out-of-bound read in the SIP conntrack helper, from
Joas Antonio dos Santos.
4) UaF on cttimeout module removal, from Chengfeng Ye.
5) Unregister nf_loggers before netns teardown to fix UaF,
also from Chengfeng Ye.
6) Fix race in nfnetlink_log due to concurrent instance destruction,
from Florian Westphal.
7) Remove arp_table 32bit compat interface, this is already off in
many distributions, from Florian Westphal.
8) Set IP6T_F_PROTO flag is e->ipv6.proto is set on to deal with
insufficient validation of xtables extensions when used from
legacy ip6tables, from Florian.
9) Set on the NLM_F_DUMP_FILTERED flag when all is filtering out
in ctnetlink, from Ilya Maximets.
* tag 'nf-26-09-07' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: report NLM_F_DUMP_FILTERED when all is filtered out
netfilter: ip6_tables: set F_PROTO when proto value is nonzero
netfilter: arp_tables: remove the 32bit compat interface
netfilter: nfnetlink_log: cope with concurrent instance destruction
netfilter: nf_log: unregister loggers before per-net teardown
netfilter: cttimeout: prevent UAF during module unload
netfilter: nf_conntrack_sip: fix OOB read in sip_skip_whitespace()
ipvs: fix reversed sequence option serialization
ipvs: reject invalid states in connection template sync records
====================
Link: https://patch.msgid.link/20260907171732.1407739-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
get_cpu_cacheinfo_id() is a static inline that requires get_cpu_cacheinfo(),
which is not exported. Modules that need to identify which cache instance
a CPU belongs to therefore cannot use it.
Move it out of line and export it.
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Link: https://patch.msgid.link/20260828153002.10290-2-tony.luck@intel.com
|
|
Currently, we assume the bus is wakeable when the bus clock stops. But
in some case like system suspend, we want to stop the bus but keep the
bus unwakeable.
No function change in this commit.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20260901030311.232823-3-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
CLOCK_STOP_MODE1 is used when the Peripheral might have entered a deeper
power-saving mode that does not retain state while the Clock is stopped.
It is useful when the device is more power consumption sensitive. Add it
back to allow the Peripheral use CLOCK_STOP_MODE1.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20260901030311.232823-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com> says:
These two patches were originally part of
https://lore.kernel.org/all/20260907083727.733705-1-srinivas.kandagatla@oss.qualcomm.com/
As Suggested by Charles and Pierre am sending them as independent
of the rest of that series and can be picked up on their own.
Patch 1 adds SDCA_FUNCTION_TYPE_SIMPLE_JACK to the class function
driver's auxiliary id table so a SimpleJack auxdev is bound and
enumerated as an ASoC component, and wires set_jack for this
function type so the machine driver can register an ASoC jack
against it.
Patch 2 is a small cleanup: find_sdca_control_reset() only ever
returns 0, so convert it to void and drop the dead error check in
the caller. No functional change.
Both patches already carry Reviewed-by tags from Charles and
Pierre-Louis from the original posting.
Link: https://patch.msgid.link/20260908063644.463819-1-srinivas.kandagatla@oss.qualcomm.com
|
|
https://gitlab.freedesktop.org/drm/i915/kernel into drm-next
Xe related:
- Some clean-ups around drm/xe/display (Jani)
Display in general:
- Regular clean-ups (Jani)
- Enable CMRR (Content Match Refresh Rate) in fixed-RR VRR path (Mitul)
- Switch DG2 Multi-protocol PLL (MPLLB) to the DPLL framework (Mika)
- DP-HDMI PCON DSC fixes (Ankit)
- Remove duplicated call introduced by a bad cherry-pick (Chaitanya)
- Limit invalid joiner combinations harder (Jani)
- Fix value being written to DDI_CLK_VALFREQ (Suraj)
- Harden some bit-shifting operations (Luca)
- Clear SEL_FETCH_PLANE_CTL on plane disable (Nemesa)
- Update CURSOR_BUF/WM masks (Suraj)
- CDCLK related fixes and refactor specially around PCODE interaction (Ville)
- Reduce clock_gating interface between core and display (Luca)
- Gate UHBR SST SDP splitting on sink capability (Mitul)
- Enable joiner cursor fast updates (Nemesa)
- Cear the Panel Replay error status register (Jake)
- Add HDMI TMDS audio bandwidth check (Chaitanya)
- Reset use_flipq when duplicating crtc state (Mika)
Beyond display:
- Guard against NULL driver_data (Deepanshu)
- Rename GEN6_PCODE_DATA to match spec (Michal)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patch.msgid.link/apmWNIUJ5lmsvNzc@intel.com
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-next
drm-misc-next for v7.4:
UAPI Changes:
colorop:
- provide DRM_COLOR_OP_FIXED_MATRIX
Cross-subsystem Changes:
cgroups:
- fix typos
dma-buf:
- fix typos
sound:
- adapt to changes in omapdrm
Core Changes:
atomic:
- convert most of DRM from state reset callbacks to atomic_create_state
- remove drm_simple_encoder_init(); update drivers
buddy:
- improve dirty-page tracking
clients:
- log: Improve vmap handling
display:
- export HDMI SCDC status data via debugfs
edid:
- parse AMD VSDB entries
- parse ALLM/VRR capabilities
log:
- add drm_warn_ratelimited()
sched:
- add missing locking
Driver Changes:
amd:
- display: Use AMD VSDB for FreeSync
- display: Implement YUV-to-RGB with fixed-matrix colorop
amdxdma:
- various fixes
ast:
- support 256-byte EDID data
bridge:
- clean up redundant error reporting
- ti-sn65dsi83: Simplify error condition logic
hyperv_drm:
- remove support for pre-Win10 hosts
komeda:
- fix usage of GLB_CORE_ID
nouveau:
- improve runtime PM on R570 GSP firmware
- various fixes throughout the driver
- dispnv50: Support 2.147 GHz pixel clock in GB20x
omap:
- report HDMI hotplug events to ASoC HDMI codec
panel:
- panel-edp: Support MNE007QS3-F, TM140VDXP15, and KD116N36-30NB-A001
- samsung-s6d16d0: Use mipi_dsi_*_multi() functions
- support Ilitek ILI7836A OLED plus DT bindings
- support Novatek NT36532 plus DT bindings
- convert several drivers to managed cleanup
- fix Kconfig selections
panthor:
- provide gpu_cache_flush tracepoint
- improve dma_fence signalling latency
- improve locking
qaic:
- reject BOs that exceed maximum page count
- add missing include statements
verisilicon:
- fix hardware cursor offsets
vkms:
- implement YUV-to-RGB with fixed-matrix colorop
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20260903130548.GA91506@2a02-2455-9062-2500-3419-2212-e55c-8a45.dyn6.pyur.net
|
|
Filesystem paths may expand fourfold when trace text escapes spaces and
other untrusted bytes. A sufficiently long representation can exhaust
the shared scratch sequence. A sibling __print_flags() helper may then
return an unterminated one-past pointer because TP_printk() argument
ordering is unspecified.
Use a fixed budget rather than the scratch space available at call time,
so output does not vary with sibling evaluation order. Limit an
untrusted string to three quarters of the trace sequence, leaving the
rest for sibling helpers and final event metadata. Compute and commit
complete escaped output transactionally so an exact fill cannot consume
the terminating NUL or poison the scratch sequence.
For strings that exceed the limit, retain the largest prefix ending at a
complete escape unit, then append a raw UTF-8 ellipsis. Keep the
helper's existing octal fallback so complete values remain unchanged.
Hex fallback would consume the same four bytes per escaped byte without
increasing the prefix or strengthening the marker. ESCAPE_NAP renders
every non-ASCII input byte in octal, so legitimate data cannot reproduce
the marker without being escaped.
Cc: Günther Noack <gnoack@google.com>
Link: https://patch.msgid.link/20260907154401.124362-1-mic@digikod.net
Signed-off-by: Mickaël Salaün <mic@digikod.net>
|
|
Correct "forwared" to "forwarded", reported by scripts/checkpatch.pl using
the misspelling list in scripts/spelling.txt. Only touches comments, no
code changes.
Assisted-by: Cursor:claude-opus-5
Signed-off-by: Hemanth Selam <hemanth.selam@gmail.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
Fix typos in comments, reported by scripts/checkpatch.pl using the
misspelling list in scripts/spelling.txt. Only touches comments, no code
changes.
Assisted-by: LLM
Signed-off-by: Hemanth Selam <hemanth.selam@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://patch.msgid.link/20260904111816.31254-1-hemanth.selam@gmail.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
USB serial driver modules register one driver for the USB bus and one or
more drivers for the ports on the USB serial bus.
When unloading a driver module, the USB driver must be deregistered
before the USB serial bus drivers so that I/O is stopped before
unbinding the ports to avoid use-after-free in completion handlers
accessing port data.
Note that the "new_id" attributes must first be removed to prevent new
ids from being added and triggering a probe of the USB driver after it
has been deregistered.
Fixes: 765e0ba62613 ("usb-serial: new API for driver registration")
Cc: stable@vger.kernel.org # 3.4
Cc: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
Platform drivers invoke rproc_vq_interrupt() from hard-IRQ handlers,
threaded handlers, and work items. Because rpmsg callbacks may sleep,
the virtio core's synchronize_rcu() fallback does not synchronize with
callbacks across all these contexts. A device reset can therefore
complete while a callback is still running.
Add an SRCU domain per rproc. Protect both the queue lookup and
vring_interrupt() with it, and synchronize the domain in the new hook.
__rproc_virtio_del_vqs() can race with rproc_vq_interrupt() too. Clear
all queue pointers and synchronize the SRCU domain before freeing the
queues, so callers that already found a queue can finish using it.
Read rvring->vq once to avoid a second load after deletion starts.
The SRCU domain has the same lifetime as struct rproc. Its cleanup can
sleep, so document that rproc_free() and rproc_put() must not drop the
last reference from atomic context.
Assisted-by: LLM
Signed-off-by: Karl Mehltretter <kmehltretter@gmail.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Message-ID: <20260908053817.26065-4-kmehltretter@gmail.com>
|
|
dma_iova_try_alloc() reserves one contiguous IOVA for the whole range and
links each page at the next offset, so the device addresses run
contiguously from entry 0 and one entry describes them all. A 2 MiB range
of 4 KiB pages then drops the same 8 KiB array as a THP backed one.
Fold only when state_offset covers the full range, which proves no device
page was mapped in between, and only single page entries, so the order
kept is 0 and stays true. Widening it instead would tell a consumer to use
a huge page for npages separate CPU pages, which hangs Vega20 on amdgpu.
The kept entry no longer bounds the segment, so skip the unmap walk when
it has nothing to do, keyed off dpagemap rather than the flags, which are
not published yet on the error unwind. Consumers need the same
distinction, so drm_gpusvm_pages_first_dma() returns it alongside the
array from one read of the flags; xe passes it to xe_res_first_dma().
Suggested-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Honglei Huang <honghuan@amd.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20260905133142.3628027-7-honghuan@amd.com
|
|
drm_gpusvm_get_pages() sizes the dma_addr array for one drm_pagemap_addr
per page, but the mapping loop advances by page order, so a range backed
by one huge page needs a single entry. For a 2 MiB THP that is an 8 KiB
array holding 16 bytes of address.
Union that entry with the array pointer, discriminated by a new
inline_dma_mapping flag. When drm_gpusvm_dma_map_pages() ends up with one
entry it stores it inline and frees the array, after the last error
unwind, which still walks the array form. An unchecked dma_addr read is
now type confusion rather than a compile error, so reads go through the
new drm_gpusvm_pages_first_dma() accessor, including the two
xe_pt_stage_bind() paths.
Only get_pages() and the free path write the union, never the notifier,
and both run under the driver lock that every address reader already
holds. The unlocked short circuit in drm_gpusvm_pages_valid_unlocked()
goes for the same reason: it cannot resolve the union, and every instance
it rejects has to be reset before the allocation loop reuses it.
Suggested-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Honglei Huang <honghuan@amd.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20260905133142.3628027-6-honghuan@amd.com
|
|
Some drivers (e.g. AMDXDNA) only need the CPU pages faulted in and tracked
by the notifier, no need DMA mapping.
Add a drm_gpusvm_ctx::no_dma_map flag. When set, get_pages() does the
shared HMM fault and records notifier_seq, but skips svm_pages->drm
validation, the dma_addr allocation and drm_gpusvm_dma_map_pages().
With no mapping state to check, the fault is redone on every call. The
default (no_dma_map == 0) is unchanged.
Suggested-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Honglei Huang <honghuan@amd.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20260905133142.3628027-5-honghuan@amd.com
|
|
With the N:1 drm_gpusvm_pages layout, one CPU range mirrored on several
drm_devices, the caller had to invoke get_pages() once per device and
repeat the HMM fault every time.
Make get_pages() take a contiguous array of drm_gpusvm_pages plus a
count: fault once, then DMA map each instance by
drm_gpusvm_dma_map_pages() under a single read_retry gate. xe range and
userptr callers are updated.
Document the N:1 array usage in the Overview, showing how get_pages()
and drm_gpusvm_range_set_unmapped() take the whole array and its count
while the unmap and free paths stay per-instance.
Suggested-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Honglei Huang <honghuan@amd.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20260905133142.3628027-4-honghuan@amd.com
|
|
https://gitlab.freedesktop.org/drm/xe/kernel into drm-next
Cross-subsystem Changes:
- MAINTAINERS: Add entries for drm_ras (Rodrigo)
- alerts and controller enabling modifications (Heikki)
Core Changes:
- Introduce cold reset recovery method (Mallesh)
- Add drm_ras netlink error event support (Riana)
- Introduce error threshold to drm_ras (Raag)
Driver Changes:
- Remove sysfs entry on idr_alloc failure in xe_oa_add_config_ioctl (Lu)
- match argument naming with PCODE_DATAx (Grzelak)
- fix stale GGTT mappings on unmap (Tangudu)
- Introduce error threshold to drm_ras (Raag)
- Add debugfs knob to control GPGPU preemption granularity (Varun)
- fix vecs config for powergating info (Ashutosh)
- Read mailbox phase bit from hardware (Anoop)
- alerts and controller enabling modifications (Heikki)
- Use int instead of u32 for mailbox status (Umesh)
- Reject page faults from non-fault-mode scratch VMs (Arvind)
- Add CCS to the powergating info print (Balasubramani)
- Do not apply WA 14025883347 to media 3503 (Daniele)
- don't WARN on kernel job timeout when device already wedged (Nitin)
- handle exec queue teardown after hot-unplug (Nitin)
- Allow debugging PCI errors (Raag)
- Add structured SIGID error logging infrastructure (Wajdeczko, Rodrigo)
- Enable package and vram temperatures for CRI (Karthik)
- Introduce cold reset recovery method (Mallesh)
- fix error message in xe_migrate_sanity_test (Dan Carpenter)
- Add drm_ras netlink error event support (Riana)
- Fix a bug in pc_adjust_freq_bounds() (Vinay)
- Fix xe_device_probe() failure (Raag)
- Page fault cleanups (Wajdeczko)
- OA memory fixes (Linmao)
- document sentinel and make CTX_TIMESTAMP read TOCTOU-safe (Gajendra)
- Move has_drm_ras check to drm_ras layer (Raag)
- add termination on resume (Daniele)
- Add _locked variants of some config functions (Wajdeczko)
- Order ring writes before ring tail updates (Brost)
- Parallel page fault handling (Brost)
- handle CRI+ power interval encoding (Karthik)
- allocate UM queues in a separate UC BO (Jia)
- Fix boot-time ras error processing (Raag)
- VF migration for multi-queue (Niranjana)
- Apply RCS/CCS yield policy to SR-IOV VFs (Marcin)
- Fix memory leak in exec_queue_set_hang_replay_state (Winiarski)
- Use IBC v3 on PTL (Vinay)
- Reduce MERT debug log spam (Lukasz, Piotr)
- Validate sysctrl response (Raag)
- Changes for Xe3p_HPM media (Ashutosh)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/apYbnrklyk6nNO7Q@gsse-cloud1.jf.intel.com
|
|
Correct "protcol" to "protocol", reported by scripts/checkpatch.pl using
the misspelling list in scripts/spelling.txt. Only touches comments, no
code changes.
Signed-off-by: Hemanth Selam <hemanth.selam@gmail.com>
Link: https://patch.msgid.link/20260904123638.39273-1-hemanth.selam@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Correct "asymetric" to "asymmetric", reported by scripts/checkpatch.pl
using the misspelling list in scripts/spelling.txt. Only touches comments,
no code changes.
Signed-off-by: Hemanth Selam <hemanth.selam@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20260904104107.12832-3-hemanth.selam@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Correct "framwork" to "framework", reported by scripts/checkpatch.pl using
the misspelling list in scripts/spelling.txt. Only touches comments, no
code changes.
Signed-off-by: Hemanth Selam <hemanth.selam@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20260904104107.12832-2-hemanth.selam@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Recently, IPV6_ADDRFORM has received many AI-driven bug reports.
Fixing them properly would needlessly churn the fast paths in TCP
and UDP.
IPV6_ADDRFORM was initially introduced in RFC 2133 in 1997,
but only two years later, it was removed from RFC 2553 in 1999.
In 2026, modern applications natively support dual-stack sockets;
notably, systemd's socket activation does not use IPV6_ADDRFORM.
Also, getsockopt(IPV6_ADDRFORM) can be replaced with SO_DOMAIN.
Let's remove IPV6_ADDRFORM.
Later, we can remove sk->sk_prot_creator and revert commit
c26c192c3d48 ("udp: properly deal with xfrm encap and ADDRFORM").
Reported-by: Daehyeon Ko <4ncienth@gmail.com>
Closes: https://lore.kernel.org/netdev/20260902010408.1057857-1-4ncienth@gmail.com/
Reported-by: Hyunwoo Kim <imv4bel@gmail.com>
Closes: https://lore.kernel.org/netdev/20260824033331.1084971-1-imv4bel@gmail.com/
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260904033543.2635540-3-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The following state transitions have long been a playground for
syzbot, and recently AI joined in, reporting a lot more bugs.
* listen() + shutdown() + connect()
* connect() + connect(AF_UNSPEC) + listen()
All the fix attempts would add more code to the fast path, which
is not worth it.
Instead of playing whack-a-mole with these edge-case bugs,
let's disallow these transitions.
Note that unhashed_state is placed in the 4-byte hole after
icsk_pmtu_cookie.
$ pahole -C inet_connection_sock vmlinux
struct inet_connection_sock {
...
__u32 icsk_pmtu_cookie; /* 1208 4 */
unsigned char unhashed_state; /* 1212 1 */
/* XXX 3 bytes hole, try to pack */
Reported-by: Kyle Zeng <kylebot@openai.com>
Closes: https://lore.kernel.org/netdev/20260731140512.566464-1-david.lee@trailofbits.com/
Reported-by: Michal Luczaj <mhal@rbox.co>
Closes: https://lore.kernel.org/netdev/20260803-sockmap-lookup-tcp-leak-v2-0-306e025bfe66@rbox.co/
Reported-by: Hyunwoo Kim <imv4bel@gmail.com>
Closes: https://lore.kernel.org/netdev/20260824033331.1084971-1-imv4bel@gmail.com/
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260904033543.2635540-2-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit 427faee167bc ("net: ipv6: introduce ip6_dst_mtu_maybe_forward")
dropped the IP6_MAX_MTU clamp that used to be present in ip6_mtu(). A
similar IPv4 commit ac6627a28dbf ("net: ipv4: Consolidate ipv4_mtu and
ip_dst_mtu_maybe_forward") preserves the IP_MAX_MTU clamp.
Restore the upper bound in the IPv6 flow to avoid potential 16-bit
overflows in forwarding paths.
Fixes: 427faee167bc ("net: ipv6: introduce ip6_dst_mtu_maybe_forward")
Signed-off-by: Alice Mikityanska <alice@isovalent.com>
Suggested-by: Willem de Bruijn <willemdebruijn.kernel@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260901195714.673548-5-alice.kernel@fastmail.im
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
netdevsim has no SADB. The usage of psp_assoc_drv_data() was always
obsolete given psp_validate_xmit(), so we can remove nsim_assoc_add()
and nsim_assoc_del(). netdevsim::assoc_cnt can also be removed. PSP core
can track the balance of tx_key_add vs tx_key_del calls in a future
change.
Delete psp_assoc_drv_data() because there are no more callers left in
the tree. mlx5 accesses pas->drv_data directly.
Signed-off-by: Daniel Zahka <daniel.zahka@gmail.com>
Link: https://patch.msgid.link/20260903-psp-prep-v1-4-d47e9c4c375d@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Drivers that don't use an SADB for tx key storage don't have a use
for psp_dev_ops::tx_key_add and psp_dev_ops::tx_key_del.
Allowing drivers to leave these as NULL gives PSP core a simple way to
determine whether a driver utilizes an SADB, which in turn could
affect how PSP core chooses to handle certain situations.
For example:
- deciding if tx key deletion needs to be delayed during a rekeying
event to avoid in-flight packets using old key handles.
- choosing whether or not to report device stats like SADB usage to
userspace, which only make sense if the driver uses on-device key
storage.
Signed-off-by: Daniel Zahka <daniel.zahka@gmail.com>
Link: https://patch.msgid.link/20260903-psp-prep-v1-3-d47e9c4c375d@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Enable support for Intel IPU 7 and IPU 7.5, found in Lunar lake and
Panther lake, respectively, in the ipu6 driver.
Disabling the CONFIG_VIDEO_INTEL_IPU6_IPU7 Kconfig option can be used to
still default the support of IPU7 and 7.5 to the ipu7 driver, while
default is enabled. The driver binding can still be configured at runtime
by using force_probe and force_no_ipu7_probe options in ipu6 and ipu7
drivers, respectively.
Signed-off-by: Antti Laakso <antti.laakso@linux.intel.com>
Co-developed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
|
|
DMA page allocation fallbacks use alloc_pages_node() with get_order(size),
wasting the unused tail for non-power-of-two requests.
Use alloc_pages_exact_nid() and free_pages_exact() so that a buddy
fallback retains only requested pages.
Signed-off-by: Qingfang Deng <qingfang.deng@linux.dev>
Link: https://lore.kernel.org/r/20260903012914.312305-1-qingfang.deng@linux.dev
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
|
|
Function dma_opt_mapping_size() implies from its name that it returns a
target or sweet spot DMA mapping size. However, it is just an upper limit
optimal DMA mapping size. Above this size, DMA mapping performance may
significantly degrade.
Rename to dma_max_opt_mapping_size() to reflect the real behaviour. Also
rename the internal DMA mapping symbols to align with this.
The DMA API documentation already described this behaviour properly (so
there is nothing to update).
Signed-off-by: John Garry <john.garry@linux.dev>
Link: https://lore.kernel.org/r/20260831093620.3481337-1-john.g.garry@oracle.com
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
|
|
This feature is required to use 32bit arptables binary on 64bit kernels.
It's already off in many distributions including Debian and Fedora for
many years.
Zap arptables first, it's the most esoteric of the 4 flavors.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Backmerging to get drm-misc-next up to v7.3-rc2. Requested for
commit 3a2c4d55e32a ("treewide: refresh kmalloc_obj() conversions").
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
|
|
Merge the immutable branch dt into next, to allow the updated DT bindings
to be tested together with the pmdomain changes that are targeted for the
next release.
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
|
|
Add devicetree documentation for the Exynos5515 SoC's CMUs.
Add device tree bindings for the following CMUs:
- CMU_TOP
- CMU_PERI
- CMU_FSYS
Signed-off-by: Aiden Isik <aidenisik@member.fsf.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260818-for-next-lucky7-clock-v2-1-cda0cc80f158@member.fsf.org
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
|
|
A bunch of older cross compilers notably RISCV64 and S390 fail to eliminate
the dead code when CONFIG_AUDITSYSCALL=n. The code in question is:
if (unlikely(audit_context())
syscall_enter_audit(regs);
and in case of CONFIG_AUDITSYSCALL=n:
static inline struct audit_context *audit_context(void)
{
return NULL;
}
which should make the compiler eliminate the syscall_enter_audit()
call. But a RISV64 GCC12 cross compiler translates that into:
if (unlikely(audit_context()))
1c34: 00000097 auipc ra,0x0
1c38: 000080e7 jalr ra # 1c34 <.L785>
1c3c: c511 beqz a0,1c48 <.L787>
syscall_enter_audit(regs);
1c3e: 8526 mv a0,s1
1c40: 00000097 auipc ra,0x0
1c44: 000080e7 jalr ra # 1c40 <.L785+0xc>
and then claims in the failing link:
include/asm-generic/preempt.h:54:(.noinstr.text+0x1a20):
undefined reference to 'syscall_enter_audit'
which is obviously hallucination.
Add an explicit IS_ENABLED(CONFIG_AUDITSYSCALL) check into the condition to
cure this compiler madness.
Fixes: 6f25517010dd ("entry: Rework syscall_audit_enter()")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/87tso45bqq.ffs@fw13
Closes: https://lore.kernel.org/oe-kbuild-all/202609031938.ZvZZaRQy-lkp@intel.com/
|
|
We currently print through sysfs and debugfs the name of the part if the
.name field, which is legacy, has been filled in the ID table (otherwise
"(null)" is printed). These IDs had an interest until manufacturers
started re-using more and more extensively the so called unique JEDEC
IDs. At this stage, a name that was tailored for a chip sold in 2016 may
no longer be relevant for a chip sold in 2026. Still showing this name
through the various filesystems may confuse people, removing these names
cannot be done since they are now part of the user ABI (because of
sysfs).
In order to allow overwriting the .name field (which is part of a
read-only structure), let's create a spi-nor pointer which will by
default point to that .name, but which can be cleared in fixup hooks to
make sure the name is hidden on newer parts.
Reviewed-by: Takahiro Kuwano <takahiro.kuwano@infineon.com>
Reviewed-by: Michael Walle <mwalle@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Michael Walle <mwalle@kernel.org>
|
|
Revision F of the JEDEC JESD216 standard includes yet another
supported setting in the QER 3-bit bitfield: 110b.
This setting implies that the QE bit is bit 1 of SR2 (which is an
already supported case) but this time it makes it very clear that both
reading and writing to SR2 is supported, but not with the usual
opcodes. The write operation uses an alternate WRSR2 opcode:
0x31 (instead of 0x3E) and both the reads and writes manipulate a single
register at a time.
Reviewed-by: Takahiro Kuwano <takahiro.kuwano@infineon.com>
Reviewed-by: Michael Walle <mwalle@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Michael Walle <mwalle@kernel.org>
|
|
SPI NOR has a lot of history. Additions over additions, the subtleties
of the JESD216 specification, their implementations by the manufacturers
and the hardware mistakes have generated a gigantic maze, let's try to
understand what is really needed.
The specification explains the QE (Quad Enable) bitfield as describing
where the bit to enable the Quad capability is, but also how to set
it. Unfortunately, the specification is not precise about what opcodes
are supported exactly in all the cases. There is an introduction that
basically states:
- Opcode 0x05 reads SR1
- Opcode 0x35 reads SR2
- Opcode 0x01 writes SR1, and then SR2 if another byte is written
Then the bitfield, among indicating the location of the QE bit, may
indicate:
- Reading SR1 and SR2 in one operation is not possible (loops over the
content of SR1)
- Reading SR2 directly is possible
- Only writing SR1 zeroes SR2.
One problem with the current implementation, is that it only focuses on
the QE bit. A quad_enable function was created for each case, even
though in practice, the logic was always the same: read, modify, write,
read back and verify. One problem comes when other features need to play
with the status registers, like software block protection or OTP: you
never know how to properly handle the QE bit, nor where it is, nor how
to read/write the Status registers. This lead to
approximations/guessing (in swp.c, otp.c and obviously in legacy
controller drivers like atmel.c) but also to the implementation of a
gazillon of helpers for reading/writing/checking the status registers.
In addition, I believe some design decisions had a negative impact over
the years.
- All possible situations had to be flagged by the core. This is likely
wrong, because we no longer know why we need specific quirks. It was
ineherent to the state of the SPI NOR core before the great cleanup
that had happened the past few years. I believe this creates confusion
in the core today, and we should push this to vendor fixups
instead. As an example, in 2023 Hsin-Yi was facing an issue because
his chip was setting the wrong QER value, leading to RDCR being
prevented, thus falling into a condition blindly setting a random QE
bit (I strongy believe it is done like that for wrong reasons). His
chip actually had RDCR support! The correct fix should have been to
mark the capability in a device fixup instead of handling this in the
core.
Link: https://lore.kernel.org/lkml/CAJMQK-hR0eaO0b4Vd0U8_KAndLyZapqdHjVLAoe42rWi9rdLkA@mail.gmail.com/
- SFDP parsing is over cautious. I believe
BFPT_DWORD15_QER_SR2_BIT1_NO_RD is abusive (nothing states that RDCR is
not supported), and BFPT_DWORD15_QER_SR2_BIT1 is also out of
specification when forcing 16-bit Status writes.
- SNOR_F_HAS_16BIT_SR is only imposing 16bit Status writes, whereas
reads can still be 8-bit wide.
- The usage of helpers verifying the writes was also spread for IMHO no
really good reason. Why shouldn't we trust spi operations when it
comes to Status Registers? We do not read back our page reads, so why
status registers should be treated with so much care, if it's not
because we are unsure of what is being done? My proposal includes a
check when it comes to the QE bit (done once) but we don't need these
checks otherwise. If the QE bit was written properly, there are high
chances that the other register accesses will just be fine, no?
Asde from my main quest, I also observed no good reason to ask the
read/write status register callers to use nor->bouncebuf while the
low-level helpers could do it themselves (we are talking about one or
two bytes being copied).
So after these observations, my proposal is the following:
- Create private low level helpers that just read or write a status
register. They are flexible, we can give the opcode (which varies
based on the SFDP QER field) and the length (1 or 2).
- Create public generic accessors which will be used to read/write sr1
and/or sr2. This is where all the cleverness shall be. The helpers use
the available opcodes for a given chip in order to fullfill the
request.
- Provide a single generic ->quad_enable() hook which generically does
all the steps mentioned above (read, modify, write, read back and
verify).
- Create a list of opcodes for all 6 possible situations:
{read, write} {sr1, sr2, sr1 and sr2}. These opcodes are
filled/cleared based on the QER field. An opcode set to 0 indicates
the absence of support (there is no 0x00 opcode in SPI NOR).
I tried my best to analyze the current behavior and to mimic it as much
as possible, but this is a risky cleanup. However, if we go for this, it
will be *much* easier in the future to handle all kind of chip
variations. We won't be limited to a couple of flags anymore, but rather
we'll be able to just disable a read or write capability using a single
line.
Known deviations:
- The Atmel manufacturer driver drives non SFDP chips which by default
were receiving the HAS_16B_WR flag, forcing SR2 writes all the times,
but it was deliberately making single bytes writes to SR1 for its
locking operations. The flag is likely wrong for them, so I removed
it.
- I am proposing on purpose a single quad_enable helper. It should match
all the cases, with 1 identified difference which I believe is
harmless: in the SR2_BIT7 case, the helper would make an extra SR1
read/write which was not done before. This entry explicitly supports
reading and writing the two registers. Note: no manufacturer has been
identified to actually use that entry yet.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Michael Walle <mwalle@kernel.org>
|
|
The stateless HEVC decoders compute the number of tile columns and rows
from num_tile_columns_minus1 / num_tile_rows_minus1 and clamp it to the
column_width_minus1[] / row_height_minus1[] capacity before using it as a
loop bound. Add shared helpers in a new <media/v4l2-hevc.h> so the rkvdec
and hantro drivers do not each open-code the min_t() clamp.
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Assisted-by: Claude:claude-opus-4-8
Fixes: 256fa3920874 ("media: v4l: Add definitions for HEVC stateless decoding")
Cc: stable@vger.kernel.org
Reviewed-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The hardware allows queueing descriptors ahead of updating producer/consumer
fields. This way it is possible to avoid unnecessary register writes on
hot-paths such as when transferring networking packets. For this reason
introduce an API that allows Thunderbolt service drivers to opt-in for
this and take advantage of batching.
Assisted-by: LLM
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
Cross-merge BPF and other fixes after downstream PR.
Conflicts:
kernel/bpf/backtrack.c
include/linux/bpf_verifier.h
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Fix several tracefs files that did not take the trace_array reference
A trace instance can be created and destroyed in the tracefs
"instances" directory via mkdir and rmdir respectively. The instance
is represented by a trace_array descriptor.
Most tracefs files pass the trace_array as the private data of the
inode to the open/read/write functions. Since there is no locking
between the time a task opens a file and the deletion of the instance
(and the freeing of the trace_array), each open needs to get a
reference to the trace_array and each close must remove it.
An instance can't be removed if there's any reference taken on its
trace_array. The open function uses trace_array_get() that takes a
lock (preventing removal of instances) and iterates the list of all
existing trace_arrays and if it finds a match, it takes the reference
and releases the lock. If it doesn't find a match, it causes the open
to return -ENODEV.
There were some added files that did not take the trace_array
reference on open that needed to be fixed. Sashiko also correctly
pointed out that there were some files that took an address of an
field or element of the trace_array which had a pointer back to the
trace_array to take its reference on open. But this leaves a slight
race between referencing this element to get the trace_array as the
element itself could be freed. To solve this, some helper functions
were created to look for trace_arrays with this field or element in
the search so that the element did not have to be dereferenced before
the trace_array's reference was taken.
- Add a lock around ftrace_ops initialization
When a ftrace_ops is first used by ftrace, some internal
initialization is performed on the ops. But if multiple tasks were
calling functions that did this initialization, it could race and
perform doing the initialization more than once, corrupting the
internal data. Add a lock in the initialization code to prevent this
from happening.
- Fix splice reads on mmapped buffers
The logic in the ring buffer splice code for mmapped buffers is
supposed to do a copy of the memory as the mapped buffers can't be
given to splice. But there was an if statement within the copy code
that would return a -1 if a request for a full page was done and it
wasn't a partial read. This is because this logic was written before
mmapped buffers existed and this case didn't make sense at the time.
For mmapped buffers it makes perfect sense and by returning early can
drop a lot of pages unnecessarily.
- Have the persistent ring buffer validation check nr_subbufs
Sashiko reported that the validation code was relying on the saved
nr_subbufs to match the calculated nr_pages + 1 and if they were off,
that the code could cause corruption. Sashiko is correct, and the
saved nr_subbufs should be validated before assuming it is correct.
- Do not allow more than one instance with the same name on cmdline
If an admin were to add more than one trace instances with the same
name they all would be created, but only the first one would be
accessible via tracefs. This used to not be allowed but some
restructuring of code has since made it possible.
- Fix the race between subbuf resize and trace_pipe_raw readers
If a task was reading trace_pipe_raw while another task was changing
the ring buffer subbuf size, it could crash the reader. The
trace_pipe_raw readers do get their own copy of the page from the
buffer, but the code needs some restructuring to not have the resize
of the subbuffers cause issues.
- Cap the size of the mapped (static) ring buffer nr_pages
The meta data used for ring buffer mapped buffers is 32 bit in size.
A normal ring buffer could (in theory) have more than 4 billion
pages. But this is not allowed by mapped buffers, so enforce it.
* tag 'trace-v7.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
ring-buffer: Use a macro for static buffer bits
tracing: Fix comment in tracing_buffers_splice_read()
ring-buffer: Prevent truncation of nr_pages / nr_subbufs
ring-buffer: Cap static ring buffer nr_pages
tracing: Fix subbuf resize races with trace_pipe_raw readers
tracing: Fix to avoid creating trace instances with duplicate names
ring-buffer: Add checking nr_subbufs to persistent ring buffer validation
ring-buffer: Allow splice reads on static buffers
tracing: Take trace_array reference when opening options file
ftrace: Synchronize the initialization of ftrace_ops
ftrace: Take trace_array reference before accessing its ftrace_ops
tracing: Have show_event_filters/triggers files take trace array ref
|
|
Pull bpf fixes from Alexei Starovoitov:
"This mainly contains verifier fixes that address bugs reported by
Nicholas Carlini.
- Fix incorrect non-NULL inference in pointer comparisons: pointer
types that may be NULL at runtime, pointers with unbounded offsets,
JMP32 comparisons with zero, and imprecise zero registers (Eduard
Zingerman)
- Fix precision tracking for half-dead zero spills, ld_abs/ld_ind
implicit subprog exit, bpf_loop() callbacks, linked scalar ids and
NULL call arguments (Eduard Zingerman)
- Reject BPF_PSEUDO_FUNC reference to the main program, fix zero
extension of arena 32-bit cmpxchg, don't rewrite bpf_fastcall
patterns entered by a jump (Eduard Zingerman)
- Fix percpu map update and BPF_F_CPU validation with sparse CPU IDs
(Hui Su)
- Fix NULL-ptr-derefs in bpf_snprintf_btf() for void and VAR types,
and reject key-less BTF for hash maps (Jiayuan Chen)
- Various fixes (Kumar Kartikeya Dwivedi):
- Fix out-of-bounds access in disassembler on invalid LDSX
instruction
- mark siginfo of signal tracepoints as scalar and
sched_process_wait argument as nullable
- mark faultable stack helpers as sleepable
- reject tail calls and legacy packet loads from callbacks
- enforce rbtree callback lock restrictions for resilient locks
- require MEM_PERCPU for percpu kptr stores
- clear NON_OWN_REF after RCU protection ends
- mark NULL kptr stores precise
- preserve inner map identity in callback frames
- reject non-scalar bpf_loop() iteration counts
- Fix trampoline allocation slowdown on x86 by using
EXECMEM_MODULE_DATA (Mike Rapoport)
- Keep bpf_refcount_acquire() nullable for borrowed RCU kptrs and
reject untrusted allocated-object pointers (Ning Ding)
- Fix special fields handling in recycled rhtab elements (Nuoqi Gui,
Yuan Chen)"
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: (86 commits)
bpf, riscv: Make arena support depend on ZACAS
selftests/bpf: Test pointer bpf_loop iteration count rejection
bpf: Reject non-scalar bpf_loop iteration counts
bpf: use mark_arg_precision() in check_mem_size_reg()
bpf: propagate mark_chain_precision() errors out of loop_flag_is_zero()
selftests/bpf: precision of a NULL global subprogram BTF_ID argument
bpf: mark a NULL BTF_ID argument of a global subprogram precise
selftests/bpf: precision of a NULL kfunc argument
bpf: mark a NULL kfunc argument precise
selftests/bpf: precision of a NULL global subprogram memory argument
bpf: mark a NULL memory argument of a call precise
selftests/bpf: precision of a NULL helper argument
bpf: mark a NULL call argument precise
selftests/bpf: Test inner map identities in callbacks
bpf: Preserve inner map identity in callback frames
selftests/bpf: Test imprecise scalar kptr stores
bpf: Mark NULL kptr stores precise
selftests/bpf: Test rhtab kptr cancellation semantics
bpf: Cancel special fields when recycling rhtab elements
selftests/bpf: Test timer field on recycled rhtab element
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking fixes from Ingo Molnar:
- Fix a softirq processing delay bug in local_interrupt_disable(),
which should mostly only affect the Rust runtime (Boqun Feng)
- Remove the hardirq_disable_count() function which caused the
previous bug and is now unused & unnecessary (Boqun Feng)
- lockdep: Invalidate stale class_cache entries for zapped classes
(Eric Dumazet)
- Fix rt_mutex specific futex scheduling helpers
(Sebastian Andrzej Siewior)
- Fix rcuwait use-after-free race during futex requeue PI (Yao Kai)
* tag 'locking-urgent-2026-09-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
futex: Prevent rcuwait use-after-free during requeue PI
futex: Provide rt_mutex_.*_schedule() equivalents for futex scheduling
locking/lockdep: Invalidate stale class_cache entries for zapped classes
preempt: Remove hardirq_disable_count()
interrupt: Disable interrupt before modifying hardirq_disable counter
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull IRQ subsystem fixes from Ingo Molnar:
- Revert a commit to the mbigen irqchip driver that caused
a regression on two-port Hi1616 chips (Caina)
- Fix a too-long-preemption-off bug in the stm32mp-exti
irqchip driver, caused by a time unit ambiguity & mismatch
(Ju Nan)
- Remove the now completely unused irq_domain_add_linear()
inline function (Jiri Slaby)
* tag 'irq-urgent-2026-09-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/stm32mp-exti: Fix the unit of the hwspinlock timeout
Revert "irqchip/mbigen: Fix mbigen node address layout"
irqdomain: Delete irq_domain_add_linear()
|
|
The send queue of an RC QP normally needs an extra rollback area in
shared memory. With fixed-size WQEs the rollback can be derived from the
WQE size alone, so an adapter supporting it can accept a plain
power-of-two send queue and the rollback area becomes unnecessary.
Report the adapter capability to user space with a new comp_mask bit in
the alloc ucontext response, so that user space can request a
power-of-two RC send queue when the adapter supports it.
Signed-off-by: Snehal Sanghvi <snsanghvi@microsoft.com>
Link: https://patch.msgid.link/20260902153813.3385076-1-snsanghvi@linux.microsoft.com
Reviewed-by: Konstantin Taranov <kotaranov@microsoft.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
bpf_loop() declares its nr_loops argument as ARG_ANYTHING. Privileged
programs may pass pointer values to such arguments, so check_func_arg()
lets a pointer-valued R1 reach the helper-specific checks.
Since commit bb124da69c47 ("bpf: keep track of max number of bpf_loop
callback iterations"), the verifier marks R1 precise and reads its upper
bound to limit callback simulation. Precision backtracking only accepts
scalar registers, so passing a pointer instead triggers the "backtracking
misuse" verifier warning. Kernels with panic_on_warn enabled subsequently
panic.
Introduce ARG_SCALAR for helper arguments that only accept scalar values
and use it for bpf_loop() nr_loops. Generic helper argument validation then
rejects pointers before loop inlining and precision processing.
Fixes: bb124da69c47 ("bpf: keep track of max number of bpf_loop callback iterations")
Reported-by: syzbot+7b47f87674e9a1569110@syzkaller.appspotmail.com
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://patch.msgid.link/20260905014735.1452988-2-memxor@gmail.com
Closes: https://lore.kernel.org/bpf/6a9ad24c.b5d4176b.238c3e.0001.GAE@google.com/
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
|
|
An RTM_NEWQDISC request can make clsact bind a populated shared ingress
block during ->init(), publishing an embedded mini_Qdisc to lockless
readers. If the same request has an invalid TCA_RATE, estimator setup
fails after ->init(); the unwind removes the pointer but synchronously
frees its containing qdisc while tc_run() may still hold it.
Retire failed qdiscs through the same RCU helper as normal destruction.
Inline the synchronous free into the callback now that no direct callers
remain.
Fixes: 51ab2994c387 ("net: sched: allow ingress and clsact qdiscs to share filter blocks")
Reported-by: Xiang Mei <xmei5@asu.edu>
Link: https://lore.kernel.org/netdev/20260805102505.740806-1-david.lee@trailofbits.com/
Signed-off-by: Weiming Shi <bestswngs@gmail.com>
Link: https://patch.msgid.link/20260902155231.2149915-2-bestswngs@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|