| Age | Commit message (Collapse) | Author |
|---|
|
commit a554ba288845fd3f6f12311fd76a51694233458a upstream.
Time limit only makes sense when callbacks are serviced in softirq mode
because:
_ In case we need to get back to the scheduler,
cond_resched_tasks_rcu_qs() is called after each callback.
_ In case some other softirq vector needs the CPU, the call to
local_bh_enable() before cond_resched_tasks_rcu_qs() takes care about
them via a call to do_softirq().
Therefore, make sure the time limit only applies to softirq mode.
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Tested-by: Valentin Schneider <valentin.schneider@arm.com>
Tested-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Valentin Schneider <valentin.schneider@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Neeraj Upadhyay <neeraju@codeaurora.org>
Cc: Uladzislau Rezki <urezki@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
[UR: backport to 5.10-stable]
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 3e61e95e2d095e308616cba4ffb640f95a480e01 upstream.
The callbacks processing time limit makes sure we are not exceeding a
given amount of time executing the queue.
However its "continue" clause bypasses the cond_resched() call on
rcuc and NOCB kthreads, delaying it until we reach the limit, which can
be very long...
Make sure the scheduler has a higher priority than the time limit.
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Tested-by: Valentin Schneider <valentin.schneider@arm.com>
Tested-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Valentin Schneider <valentin.schneider@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Neeraj Upadhyay <neeraju@codeaurora.org>
Cc: Uladzislau Rezki <urezki@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
[UR: backport to 5.10-stable + commit update]
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 10c535787436d62ea28156a4b91365fd89b5a432 upstream.
Currently rcu_preempt_deferred_qs_irqrestore() releases rnp->boost_mtx
before reporting the expedited quiescent state. Under heavy real-time
load, this can result in this function being preempted before the
quiescent state is reported, which can in turn prevent the expedited grace
period from completing. Tim Murray reports that the resulting expedited
grace periods can take hundreds of milliseconds and even more than one
second, when they should normally complete in less than a millisecond.
This was fine given that there were no particular response-time
constraints for synchronize_rcu_expedited(), as it was designed
for throughput rather than latency. However, some users now need
sub-100-millisecond response-time constratints.
This patch therefore follows Neeraj's suggestion (seconded by Tim and
by Uladzislau Rezki) of simply reversing the two operations.
Reported-by: Tim Murray <timmurray@google.com>
Reported-by: Joel Fernandes <joelaf@google.com>
Reported-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Reviewed-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Reviewed-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Tested-by: Tim Murray <timmurray@google.com>
Cc: Todd Kjos <tkjos@google.com>
Cc: Sandeep Patil <sspatil@google.com>
Cc: <stable@vger.kernel.org> # 5.4.x
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit b2fcf2102049f6e56981e0ab3d9b633b8e2741da upstream.
This sequence of events can lead to a failure to requeue a CPU's
->nocb_timer:
1. There are no callbacks queued for any CPU covered by CPU 0-2's
->nocb_gp_kthread. Note that ->nocb_gp_kthread is associated
with CPU 0.
2. CPU 1 enqueues its first callback with interrupts disabled, and
thus must defer awakening its ->nocb_gp_kthread. It therefore
queues its rcu_data structure's ->nocb_timer. At this point,
CPU 1's rdp->nocb_defer_wakeup is RCU_NOCB_WAKE.
3. CPU 2, which shares the same ->nocb_gp_kthread, also enqueues a
callback, but with interrupts enabled, allowing it to directly
awaken the ->nocb_gp_kthread.
4. The newly awakened ->nocb_gp_kthread associates both CPU 1's
and CPU 2's callbacks with a future grace period and arranges
for that grace period to be started.
5. This ->nocb_gp_kthread goes to sleep waiting for the end of this
future grace period.
6. This grace period elapses before the CPU 1's timer fires.
This is normally improbably given that the timer is set for only
one jiffy, but timers can be delayed. Besides, it is possible
that kernel was built with CONFIG_RCU_STRICT_GRACE_PERIOD=y.
7. The grace period ends, so rcu_gp_kthread awakens the
->nocb_gp_kthread, which in turn awakens both CPU 1's and
CPU 2's ->nocb_cb_kthread. Then ->nocb_gb_kthread sleeps
waiting for more newly queued callbacks.
8. CPU 1's ->nocb_cb_kthread invokes its callback, then sleeps
waiting for more invocable callbacks.
9. Note that neither kthread updated any ->nocb_timer state,
so CPU 1's ->nocb_defer_wakeup is still set to RCU_NOCB_WAKE.
10. CPU 1 enqueues its second callback, this time with interrupts
enabled so it can wake directly ->nocb_gp_kthread.
It does so with calling wake_nocb_gp() which also cancels the
pending timer that got queued in step 2. But that doesn't reset
CPU 1's ->nocb_defer_wakeup which is still set to RCU_NOCB_WAKE.
So CPU 1's ->nocb_defer_wakeup and its ->nocb_timer are now
desynchronized.
11. ->nocb_gp_kthread associates the callback queued in 10 with a new
grace period, arranges for that grace period to start and sleeps
waiting for it to complete.
12. The grace period ends, rcu_gp_kthread awakens ->nocb_gp_kthread,
which in turn wakes up CPU 1's ->nocb_cb_kthread which then
invokes the callback queued in 10.
13. CPU 1 enqueues its third callback, this time with interrupts
disabled so it must queue a timer for a deferred wakeup. However
the value of its ->nocb_defer_wakeup is RCU_NOCB_WAKE which
incorrectly indicates that a timer is already queued. Instead,
CPU 1's ->nocb_timer was cancelled in 10. CPU 1 therefore fails
to queue the ->nocb_timer.
14. CPU 1 has its pending callback and it may go unnoticed until
some other CPU ever wakes up ->nocb_gp_kthread or CPU 1 ever
calls an explicit deferred wakeup, for example, during idle entry.
This commit fixes this bug by resetting rdp->nocb_defer_wakeup everytime
we delete the ->nocb_timer.
It is quite possible that there is a similar scenario involving
->nocb_bypass_timer and ->nocb_defer_wakeup. However, despite some
effort from several people, a failure scenario has not yet been located.
However, that by no means guarantees that no such scenario exists.
Finding a failure scenario is left as an exercise for the reader, and the
"Fixes:" tag below relates to ->nocb_bypass_timer instead of ->nocb_timer.
Fixes: d1b222c6be1f (rcu/nocb: Add bypass callback queueing)
Cc: <stable@vger.kernel.org>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Reviewed-by: Neeraj Upadhyay <neeraju@codeaurora.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit bfb3aa735f82c8d98b32a669934ee7d6b346264d upstream.
An outgoing CPU is marked offline in a stop-machine handler and most
of that CPU's services stop at that point, including IRQ work queues.
However, that CPU must take another pass through the scheduler and through
a number of CPU-hotplug notifiers, many of which contain RCU readers.
In the past, these readers were not a problem because the outgoing CPU
has interrupts disabled, so that rcu_read_unlock_special() would not
be invoked, and thus RCU would never attempt to queue IRQ work on the
outgoing CPU.
This changed with the advent of the CONFIG_RCU_STRICT_GRACE_PERIOD
Kconfig option, in which rcu_read_unlock_special() is invoked upon exit
from almost all RCU read-side critical sections. Worse yet, because
interrupts are disabled, rcu_read_unlock_special() cannot immediately
report a quiescent state and will therefore attempt to defer this
reporting, for example, by queueing IRQ work. Which fails with a splat
because the CPU is already marked as being offline.
But it turns out that there is no need to report this quiescent state
because rcu_report_dead() will do this job shortly after the outgoing
CPU makes its final dive into the idle loop. This commit therefore
makes rcu_read_unlock_special() refrain from queuing IRQ work onto
outgoing CPUs.
Fixes: 44bad5b3cca2 ("rcu: Do full report for .need_qs for strict GPs")
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Jann Horn <jannh@google.com>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 614ddad17f22a22e035e2ea37a04815f50362017 upstream.
Currently, rcu_advance_cbs_nowake() checks that a grace period is in
progress, however, that grace period could end just after the check.
This commit rechecks that a grace period is still in progress while
holding the rcu_node structure's lock. The grace period cannot end while
the current CPU's rcu_node structure's ->lock is held, thus avoiding
false positives from the WARN_ON_ONCE().
As Daniel Vacek noted, it is not necessary for the rcu_node structure
to have a CPU that has not yet passed through its quiescent state.
Tested-by: Guillaume Morin <guillaume@morinfr.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 81f6d49cce2d2fe507e3fddcc4a6db021d9c2e7b ]
Expedited RCU grace periods invoke sync_rcu_exp_select_node_cpus(), which
takes two passes over the leaf rcu_node structure's CPUs. The first
pass gathers up the current CPU and CPUs that are in dynticks idle mode.
The workqueue will report a quiescent state on their behalf later.
The second pass sends IPIs to the rest of the CPUs, but excludes the
current CPU, incorrectly assuming it has been included in the first
pass's list of CPUs.
Unfortunately the current CPU may have changed between the first and
second pass, due to the fact that the various rcu_node structures'
->lock fields have been dropped, thus momentarily enabling preemption.
This means that if the second pass's CPU was not on the first pass's
list, it will be ignored completely. There will be no IPI sent to
it, and there will be no reporting of quiescent states on its behalf.
Unfortunately, the expedited grace period will nevertheless be waiting
for that CPU to report a quiescent state, but with that CPU having no
reason to believe that such a report is needed.
The result will be an expedited grace period stall.
Fix this by no longer excluding the current CPU from consideration during
the second pass.
Fixes: b9ad4d6ed18e ("rcu: Avoid self-IPI in sync_rcu_exp_select_node_cpus()")
Reviewed-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Uladzislau Rezki <urezki@gmail.com>
Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Joel Fernandes <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 2431774f04d1050292054c763070021bade7b151 upstream.
This commit marks accesses to the rcu_state.n_force_qs. These data
races are hard to make happen, but syzkaller was equal to the task.
Reported-by: syzbot+e08a83a1940ec3846cd5@syzkaller.appspotmail.com
Acked-by: Marco Elver <elver@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 7663ad9a5dbcc27f3090e6bfd192c7e59222709f ]
RCU managed to grow a few noinstr violations:
vmlinux.o: warning: objtool: rcu_dynticks_eqs_enter()+0x0: call to rcu_dynticks_task_trace_enter() leaves .noinstr.text section
vmlinux.o: warning: objtool: rcu_dynticks_eqs_exit()+0xe: call to rcu_dynticks_task_trace_exit() leaves .noinstr.text section
Fix them by adding __always_inline to the relevant trivial functions.
Also replace the noinstr with __always_inline for the existing
rcu_dynticks_task_*() functions since noinstr would force noinline
them, even when empty, which seems silly.
Fixes: 7d0c9c50c5a1 ("rcu-tasks: Avoid IPIing userspace/idle tasks if kernel is so built")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f0b2b2df5423fb369ac762c77900bc7765496d58 ]
The sync_sched_exp_online_cleanup() checks to see if RCU needs
an expedited quiescent state from the incoming CPU, sending it
an IPI if so. Before sending IPI, it checks whether expedited
qs need has been already requested for the incoming CPU, by
checking rcu_data.cpu_no_qs.b.exp for the current cpu, on which
sync_sched_exp_online_cleanup() is running. This works for the
case where incoming CPU is same as self. However, for the case
where incoming CPU is different from self, expedited request
won't get marked, which can potentially delay reporting of
expedited quiescent state for the incoming CPU.
Fixes: e015a3411220 ("rcu: Avoid self-IPI in sync_sched_exp_online_cleanup()")
Signed-off-by: Neeraj Upadhyay <neeraju@codeaurora.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0db7c32ad3160ae06f497d48a74bd46a2a35e6bf ]
Early in debugging, it made some sense to differentiate the first
iteration from subsequent iterations, but now this just causes confusion.
This commit therefore moves the "set_tasks_gp_state(rtp, RTGS_WAIT_CBS)"
statement to the beginning of the "for" loop in rcu_tasks_kthread().
Reported-by: Neeraj Upadhyay <neeraju@codeaurora.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 71921a9606ddbcc1d98c00eca7ae82c373d1fecd ]
rcutorture is generating some nesting scenarios that are not compatible on PREEMPT_RT.
For example:
preempt_disable();
rcu_read_lock_bh();
preempt_enable();
rcu_read_unlock_bh();
The problem here is that on PREEMPT_RT the bottom halves have to be
disabled and enabled in preemptible context.
Reorder locking: start with BH locking and continue with then with
disabling preemption or interrupts. In the unlocking do it reverse by
first enabling interrupts and preemption and BH at the very end.
Ensure that on PREEMPT_RT BH locking remains unchanged if in
non-preemptible context.
Link: https://lkml.kernel.org/r/20190911165729.11178-6-swood@redhat.com
Link: https://lkml.kernel.org/r/20210819182035.GF4126399@paulmck-ThinkPad-P17-Gen-1
Signed-off-by: Scott Wood <swood@redhat.com>
[bigeasy: Drop ATOM_BH, make it only about changing BH in atomic
context. Allow enabling RCU in IRQ-off section. Reword commit message.]
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit fed31a4dd3adb5455df7c704de2abb639a1dc1c0 ]
This commit fixes several typos where CONFIG_TASKS_RCU_TRACE should
instead be CONFIG_TASKS_TRACE_RCU. Among other things, these typos
could cause CONFIG_TASKS_TRACE_RCU_READ_MB=y kernels to suffer from
memory-ordering bugs that could result in false-positive quiescent
states and too-short grace periods.
Signed-off-by: Zhouyi Zhou <zhouzhouyi@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit dc87740c8a6806bd2162bfb441770e4e53be5601 ]
If rcu_print_task_stall() is invoked on an rcu_node structure that does
not contain any tasks blocking the current grace period, it takes an
early exit that fails to release that rcu_node structure's lock. This
results in a self-deadlock, which is detected by lockdep.
To reproduce this bug:
tools/testing/selftests/rcutorture/bin/kvm.sh --allcpus --duration 3 --trust-make --configs "TREE03" --kconfig "CONFIG_PROVE_LOCKING=y" --bootargs "rcutorture.stall_cpu=30 rcutorture.stall_cpu_block=1 rcutorture.fwd_progress=0 rcutorture.test_boost=0"
This will also result in other complaints, including RCU's scheduler
hook complaining about blocking rather than preemption and an rcutorture
writer stall.
Only a partial RCU CPU stall warning message will be printed because of
the self-deadlock.
This commit therefore releases the lock on the rcu_print_task_stall()
function's early exit path.
Fixes: c583bcb8f5ed ("rcu: Don't invoke try_invoke_on_locked_down_task() with irqs disabled")
Tested-by: Qais Yousef <qais.yousef@arm.com>
Signed-off-by: Yanfei Xu <yanfei.xu@windriver.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a649d25dcc671a33b9cc3176411920fdc5fbd98e ]
This commit adds a number of lockdep_assert_irqs_disabled() calls
to rcu_sched_clock_irq() and a number of the functions that it calls.
The point of this is to help track down a situation where lockdep appears
to be insisting that interrupts are enabled within these functions, which
should only ever be invoked from the scheduling-clock interrupt handler.
Link: https://lore.kernel.org/lkml/20201111133813.GA81547@elver.google.com/
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e6a901a44f76878ed1653626c9ff4cfc5a3f58f8 ]
The for loop in rcu_print_task_stall() always omits ts[0], which points
to the first task blocking the stalled grace period. This in turn fails
to count this first task, which means that ndetected will be equal to
zero when all CPUs have passed through their quiescent states and only
one task is blocking the stalled grace period. This zero value for
ndetected will in turn result in an incorrect "All QSes seen" message:
rcu: INFO: rcu_preempt detected stalls on CPUs/tasks:
rcu: Tasks blocked on level-1 rcu_node (CPUs 12-23):
(detected by 15, t=6504 jiffies, g=164777, q=9011209)
rcu: All QSes seen, last rcu_preempt kthread activity 1 (4295252379-4295252378), jiffies_till_next_fqs=1, root ->qsmask 0x2
BUG: sleeping function called from invalid context at include/linux/uaccess.h:156
in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 70613, name: msgstress04
INFO: lockdep is turned off.
Preemption disabled at:
[<ffff8000104031a4>] create_object.isra.0+0x204/0x4b0
CPU: 15 PID: 70613 Comm: msgstress04 Kdump: loaded Not tainted
5.12.2-yoctodev-standard #1
Hardware name: Marvell OcteonTX CN96XX board (DT)
Call trace:
dump_backtrace+0x0/0x2cc
show_stack+0x24/0x30
dump_stack+0x110/0x188
___might_sleep+0x214/0x2d0
__might_sleep+0x7c/0xe0
This commit therefore fixes the loop to include ts[0].
Fixes: c583bcb8f5ed ("rcu: Don't invoke try_invoke_on_locked_down_task() with irqs disabled")
Tested-by: Qais Yousef <qais.yousef@arm.com>
Signed-off-by: Yanfei Xu <yanfei.xu@windriver.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ccfc9dd6914feaa9a81f10f9cce56eb0f7712264 ]
The soft watchdog timer function checks if a virtual machine
was suspended and hence what looks like a lockup in fact
is a false positive.
This is what kvm_check_and_clear_guest_paused() does: it
tests guest PVCLOCK_GUEST_STOPPED (which is set by the host)
and if it's set then we need to touch all watchdogs and bail
out.
Watchdog timer function runs from IRQ, so PVCLOCK_GUEST_STOPPED
check works fine.
There is, however, one more watchdog that runs from IRQ, so
watchdog timer fn races with it, and that watchdog is not aware
of PVCLOCK_GUEST_STOPPED - RCU stall detector.
apic_timer_interrupt()
smp_apic_timer_interrupt()
hrtimer_interrupt()
__hrtimer_run_queues()
tick_sched_timer()
tick_sched_handle()
update_process_times()
rcu_sched_clock_irq()
This triggers RCU stalls on our devices during VM resume.
If tick_sched_handle()->rcu_sched_clock_irq() runs on a VCPU
before watchdog_timer_fn()->kvm_check_and_clear_guest_paused()
then there is nothing on this VCPU that touches watchdogs and
RCU reads stale gp stall timestamp and new jiffies value, which
makes it think that RCU has stalled.
Make RCU stall watchdog aware of PVCLOCK_GUEST_STOPPED and
don't report RCU stalls when we resume the VM.
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 8b5bd67cf6422b63ee100d76d8de8960ca2df7f0 upstream.
There is a need for a polling interface for SRCU grace
periods, so this commit supplies get_state_synchronize_srcu(),
start_poll_synchronize_srcu(), and poll_state_synchronize_srcu() for this
purpose. The first can be used if future grace periods are inevitable
(perhaps due to a later call_srcu() invocation), the second if future
grace periods might not otherwise happen, and the third to check if a
grace period has elapsed since the corresponding call to either of the
first two.
As with get_state_synchronize_rcu() and cond_synchronize_rcu(),
the return value from either get_state_synchronize_srcu() or
start_poll_synchronize_srcu() must be passed in to a later call to
poll_state_synchronize_srcu().
Link: https://lore.kernel.org/rcu/20201112201547.GF3365678@moria.home.lan/
Reported-by: Kent Overstreet <kent.overstreet@gmail.com>
[ paulmck: Add EXPORT_SYMBOL_GPL() per kernel test robot feedback. ]
[ paulmck: Apply feedback from Neeraj Upadhyay. ]
Link: https://lore.kernel.org/lkml/20201117004017.GA7444@paulmck-ThinkPad-P72/
Reviewed-by: Neeraj Upadhyay <neeraju@codeaurora.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 74612a07b83fc46c2b2e6f71a541d55b024ebefc upstream.
There is a need for a polling interface for SRCU grace periods. This
polling needs to distinguish between an SRCU instance being idle on the
one hand or in the middle of a grace period on the other. This commit
therefore converts the Tiny SRCU srcu_struct structure's srcu_idx from
a defacto boolean to a free-running counter, using the bottom bit to
indicate that a grace period is in progress. The second-from-bottom
bit is thus used as the index returned by srcu_read_lock().
Link: https://lore.kernel.org/rcu/20201112201547.GF3365678@moria.home.lan/
Reported-by: Kent Overstreet <kent.overstreet@gmail.com>
[ paulmck: Fix ->srcu_lock_nesting[] indexing per Neeraj Upadhyay. ]
Reviewed-by: Neeraj Upadhyay <neeraju@codeaurora.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 1a893c711a600ab57526619b56e6f6b7be00956e upstream.
There is a need for a polling interface for SRCU grace periods.
This polling needs to initiate an SRCU grace period without
having to queue (and manage) a callback. This commit therefore
splits the Tiny SRCU call_srcu() function into callback-queuing and
start-grace-period portions, with the latter in a new function named
srcu_gp_start_if_needed().
Link: https://lore.kernel.org/rcu/20201112201547.GF3365678@moria.home.lan/
Reported-by: Kent Overstreet <kent.overstreet@gmail.com>
Reviewed-by: Neeraj Upadhyay <neeraju@codeaurora.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 5358c9fa54b09b5d3d7811b033aa0838c1bbaaf2 upstream.
There is a need for a polling interface for SRCU grace
periods, so this commit supplies get_state_synchronize_srcu(),
start_poll_synchronize_srcu(), and poll_state_synchronize_srcu() for this
purpose. The first can be used if future grace periods are inevitable
(perhaps due to a later call_srcu() invocation), the second if future
grace periods might not otherwise happen, and the third to check if a
grace period has elapsed since the corresponding call to either of the
first two.
As with get_state_synchronize_rcu() and cond_synchronize_rcu(),
the return value from either get_state_synchronize_srcu() or
start_poll_synchronize_srcu() must be passed in to a later call to
poll_state_synchronize_srcu().
Link: https://lore.kernel.org/rcu/20201112201547.GF3365678@moria.home.lan/
Reported-by: Kent Overstreet <kent.overstreet@gmail.com>
[ paulmck: Add EXPORT_SYMBOL_GPL() per kernel test robot feedback. ]
[ paulmck: Apply feedback from Neeraj Upadhyay. ]
Link: https://lore.kernel.org/lkml/20201117004017.GA7444@paulmck-ThinkPad-P72/
Reviewed-by: Neeraj Upadhyay <neeraju@codeaurora.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 29d2bb94a8a126ce80ffbb433b648b32fdea524e upstream.
There is a need for a polling interface for SRCU grace periods.
This polling needs to initiate an SRCU grace period without having
to queue (and manage) a callback. This commit therefore splits the
Tree SRCU __call_srcu() function into callback-initialization and
queuing/start-grace-period portions, with the latter in a new function
named srcu_gp_start_if_needed(). This function may be passed a NULL
callback pointer, in which case it will refrain from queuing anything.
Why have the new function mess with queuing? Locking considerations,
of course!
Link: https://lore.kernel.org/rcu/20201112201547.GF3365678@moria.home.lan/
Reported-by: Kent Overstreet <kent.overstreet@gmail.com>
Reviewed-by: Neeraj Upadhyay <neeraju@codeaurora.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit a9ab9cce9367a2cc02a3c7eb57a004dc0b8f380d ]
Invoking trc_del_holdout() from within trc_wait_for_one_reader() is
only a performance optimization because the RCU Tasks Trace grace-period
kthread will eventually do this within check_all_holdout_tasks_trace().
But it is not a particularly important performance optimization because
it only applies to the grace-period kthread, of which there is but one.
This commit therefore removes this invocation of trc_del_holdout() in
favor of the one in check_all_holdout_tasks_trace() in the grace-period
kthread.
Reported-by: "Xu, Yanfei" <yanfei.xu@windriver.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 1d10bf55d85d34eb73dd8263635f43fd72135d2d ]
As Yanfei pointed out, although invoking trc_del_holdout() is safe
from the viewpoint of the integrity of the holdout list itself,
the put_task_struct() invoked by trc_del_holdout() can result in
use-after-free errors due to later accesses to this task_struct structure
by the RCU Tasks Trace grace-period kthread.
This commit therefore removes this call to trc_del_holdout() from
trc_inspect_reader() in favor of the grace-period thread's existing call
to trc_del_holdout(), thus eliminating that particular class of
use-after-free errors.
Reported-by: "Xu, Yanfei" <yanfei.xu@windriver.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 3066820034b5dd4e89bd74a7739c51c2d6f5e554 ]
If another lockdep report runs concurrently with an RCU lockdep report
from RCU_LOCKDEP_WARN(), the following sequence of events can occur:
1. debug_lockdep_rcu_enabled() sees that lockdep is enabled
when called from (say) synchronize_rcu().
2. Lockdep is disabled by a concurrent lockdep report.
3. debug_lockdep_rcu_enabled() evaluates its lockdep-expression
argument, for example, lock_is_held(&rcu_bh_lock_map).
4. Because lockdep is now disabled, lock_is_held() plays it safe and
returns the constant 1.
5. But in this case, the constant 1 is not safe, because invoking
synchronize_rcu() under rcu_read_lock_bh() is disallowed.
6. debug_lockdep_rcu_enabled() wrongly invokes lockdep_rcu_suspicious(),
resulting in a false-positive splat.
This commit therefore changes RCU_LOCKDEP_WARN() to check
debug_lockdep_rcu_enabled() after checking the lockdep expression,
so that any "safe" returns from lock_is_held() are rejected by
debug_lockdep_rcu_enabled(). This requires memory ordering, which is
supplied by READ_ONCE(debug_locks). The resulting volatile accesses
prevent the compiler from reordering and the fact that only one variable
is being accessed prevents the underlying hardware from reordering.
The combination works for IA64, which can reorder reads to the same
location, but this is defeated by the volatile accesses, which compile
to load instructions that provide ordering.
Reported-by: syzbot+dde0cc33951735441301@syzkaller.appspotmail.com
Reported-by: Matthew Wilcox <willy@infradead.org>
Reported-by: syzbot+88e4f02896967fe1ab0d@syzkaller.appspotmail.com
Reported-by: Thomas Gleixner <tglx@linutronix.de>
Suggested-by: Boqun Feng <boqun.feng@gmail.com>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b5befe842e6612cf894cf4a199924ee872d8b7d8 ]
An srcu_struct structure that is initialized before rcu_init_geometry()
will have its srcu_node hierarchy based on CONFIG_NR_CPUS. Once
rcu_init_geometry() is called, this hierarchy is compressed as needed
for the actual maximum number of CPUs for this system.
Later on, that srcu_struct structure is confused, sometimes referring
to its initial CONFIG_NR_CPUS-based hierarchy, and sometimes instead
to the new num_possible_cpus() hierarchy. For example, each of its
->mynode fields continues to reference the original leaf rcu_node
structures, some of which might no longer exist. On the other hand,
srcu_for_each_node_breadth_first() traverses to the new node hierarchy.
There are at least two bad possible outcomes to this:
1) a) A callback enqueued early on an srcu_data structure (call it
*sdp) is recorded pending on sdp->mynode->srcu_data_have_cbs in
srcu_funnel_gp_start() with sdp->mynode pointing to a deep leaf
(say 3 levels).
b) The grace period ends after rcu_init_geometry() shrinks the
nodes level to a single one. srcu_gp_end() walks through the new
srcu_node hierarchy without ever reaching the old leaves so the
callback is never executed.
This is easily reproduced on an 8 CPUs machine with CONFIG_NR_CPUS >= 32
and "rcupdate.rcu_self_test=1". The srcu_barrier() after early tests
verification never completes and the boot hangs:
[ 5413.141029] INFO: task swapper/0:1 blocked for more than 4915 seconds.
[ 5413.147564] Not tainted 5.12.0-rc4+ #28
[ 5413.151927] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 5413.159753] task:swapper/0 state:D stack: 0 pid: 1 ppid: 0 flags:0x00004000
[ 5413.168099] Call Trace:
[ 5413.170555] __schedule+0x36c/0x930
[ 5413.174057] ? wait_for_completion+0x88/0x110
[ 5413.178423] schedule+0x46/0xf0
[ 5413.181575] schedule_timeout+0x284/0x380
[ 5413.185591] ? wait_for_completion+0x88/0x110
[ 5413.189957] ? mark_held_locks+0x61/0x80
[ 5413.193882] ? mark_held_locks+0x61/0x80
[ 5413.197809] ? _raw_spin_unlock_irq+0x24/0x50
[ 5413.202173] ? wait_for_completion+0x88/0x110
[ 5413.206535] wait_for_completion+0xb4/0x110
[ 5413.210724] ? srcu_torture_stats_print+0x110/0x110
[ 5413.215610] srcu_barrier+0x187/0x200
[ 5413.219277] ? rcu_tasks_verify_self_tests+0x50/0x50
[ 5413.224244] ? rdinit_setup+0x2b/0x2b
[ 5413.227907] rcu_verify_early_boot_tests+0x2d/0x40
[ 5413.232700] do_one_initcall+0x63/0x310
[ 5413.236541] ? rdinit_setup+0x2b/0x2b
[ 5413.240207] ? rcu_read_lock_sched_held+0x52/0x80
[ 5413.244912] kernel_init_freeable+0x253/0x28f
[ 5413.249273] ? rest_init+0x250/0x250
[ 5413.252846] kernel_init+0xa/0x110
[ 5413.256257] ret_from_fork+0x22/0x30
2) An srcu_struct structure that is initialized before rcu_init_geometry()
and used afterward will always have stale rdp->mynode references,
resulting in callbacks to be missed in srcu_gp_end(), just like in
the previous scenario.
This commit therefore causes init_srcu_struct_nodes to initialize the
geometry, if needed. This ensures that the srcu_node hierarchy is
properly built and distributed from the get-go.
Suggested-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Neeraj Upadhyay <neeraju@codeaurora.org>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Uladzislau Rezki <urezki@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 8e4b1d2bc198e34b48fc7cc3a3c5a2fcb269e271 ]
Currently, rcu_spawn_core_kthreads() is invoked via an early_initcall(),
which works, except that rcu_spawn_gp_kthread() is also invoked via an
early_initcall() and rcu_spawn_core_kthreads() relies on adjustments to
kthread_prio that are carried out by rcu_spawn_gp_kthread(). There is
no guaranttee of ordering among early_initcall() handlers, and thus no
guarantee that kthread_prio will be properly checked and range-limited
at the time that rcu_spawn_core_kthreads() needs it.
In most cases, this bug is harmless. After all, the only reason that
rcu_spawn_gp_kthread() adjusts the value of kthread_prio is if the user
specified a nonsensical value for this boot parameter, which experience
indicates is rare.
Nevertheless, a bug is a bug. This commit therefore causes the
rcu_spawn_core_kthreads() function to be invoked directly from
rcu_spawn_gp_kthread() after any needed adjustments to kthread_prio have
been carried out.
Fixes: 48d07c04b4cc ("rcu: Enable elimination of Tree-RCU softirq processing")
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6494ccb93271bee596a12db32ff44867d5be2321 ]
In rcu_nmi_enter(), there is an erroneous instrumentation_end() in the
second branch of the "if" statement. Oddly enough, "objtool check -f
vmlinux.o" fails to complain because it is unable to correctly cover
all cases. Instead, objtool visits the third branch first, which marks
following trace_rcu_dyntick() as visited. This commit therefore removes
the spurious instrumentation_end().
Fixes: 04b25a495bd6 ("rcu: Mark rcu_nmi_enter() call to rcu_cleanup_after_idle() noinstr")
Reported-by Neeraj Upadhyay <neeraju@codeaurora.org>
Signed-off-by: Zhouyi Zhou <zhouzhouyi@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ee6ddf58475cce8a3d3697614679cd8cb4a6f583 ]
Running an rcuscale stress-suite can lead to "Out of memory" of a
system. This can happen under high memory pressure with a small amount
of physical memory.
For example, a KVM test configuration with 64 CPUs and 512 megabytes
can result in OOM when running rcuscale with below parameters:
../kvm.sh --torture rcuscale --allcpus --duration 10 --kconfig CONFIG_NR_CPUS=64 \
--bootargs "rcuscale.kfree_rcu_test=1 rcuscale.kfree_nthreads=16 rcuscale.holdoff=20 \
rcuscale.kfree_loops=10000 torture.disable_onoff_at_boot" --trust-make
<snip>
[ 12.054448] kworker/1:1H invoked oom-killer: gfp_mask=0x2cc0(GFP_KERNEL|__GFP_NOWARN), order=0, oom_score_adj=0
[ 12.055303] CPU: 1 PID: 377 Comm: kworker/1:1H Not tainted 5.11.0-rc3+ #510
[ 12.055416] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.12.0-1 04/01/2014
[ 12.056485] Workqueue: events_highpri fill_page_cache_func
[ 12.056485] Call Trace:
[ 12.056485] dump_stack+0x57/0x6a
[ 12.056485] dump_header+0x4c/0x30a
[ 12.056485] ? del_timer_sync+0x20/0x30
[ 12.056485] out_of_memory.cold.47+0xa/0x7e
[ 12.056485] __alloc_pages_slowpath.constprop.123+0x82f/0xc00
[ 12.056485] __alloc_pages_nodemask+0x289/0x2c0
[ 12.056485] __get_free_pages+0x8/0x30
[ 12.056485] fill_page_cache_func+0x39/0xb0
[ 12.056485] process_one_work+0x1ed/0x3b0
[ 12.056485] ? process_one_work+0x3b0/0x3b0
[ 12.060485] worker_thread+0x28/0x3c0
[ 12.060485] ? process_one_work+0x3b0/0x3b0
[ 12.060485] kthread+0x138/0x160
[ 12.060485] ? kthread_park+0x80/0x80
[ 12.060485] ret_from_fork+0x22/0x30
[ 12.062156] Mem-Info:
[ 12.062350] active_anon:0 inactive_anon:0 isolated_anon:0
[ 12.062350] active_file:0 inactive_file:0 isolated_file:0
[ 12.062350] unevictable:0 dirty:0 writeback:0
[ 12.062350] slab_reclaimable:2797 slab_unreclaimable:80920
[ 12.062350] mapped:1 shmem:2 pagetables:8 bounce:0
[ 12.062350] free:10488 free_pcp:1227 free_cma:0
...
[ 12.101610] Out of memory and no killable processes...
[ 12.102042] Kernel panic - not syncing: System is deadlocked on memory
[ 12.102583] CPU: 1 PID: 377 Comm: kworker/1:1H Not tainted 5.11.0-rc3+ #510
[ 12.102600] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.12.0-1 04/01/2014
<snip>
Because kvfree_rcu() has a fallback path, memory allocation failure is
not the end of the world. Furthermore, the added overhead of aggressive
GFP settings must be balanced against the overhead of the fallback path,
which is a cache miss for double-argument kvfree_rcu() and a call to
synchronize_rcu() for single-argument kvfree_rcu(). The current choice
of GFP_KERNEL|__GFP_NOWARN can result in longer latencies than a call
to synchronize_rcu(), so less-tenacious GFP flags would be helpful.
Here is the tradeoff that must be balanced:
a) Minimize use of the fallback path,
b) Avoid pushing the system into OOM,
c) Bound allocation latency to that of synchronize_rcu(), and
d) Leave the emergency reserves to use cases lacking fallbacks.
This commit therefore changes GFP flags from GFP_KERNEL|__GFP_NOWARN to
GFP_KERNEL|__GFP_NORETRY|__GFP_NOMEMALLOC|__GFP_NOWARN. This combination
leaves the emergency reserves alone and can initiate reclaim, but will
not invoke the OOM killer.
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 43789ef3f7d61aa7bed0cb2764e588fc990c30ef upstream.
Entering RCU idle mode may cause a deferred wake up of an RCU NOCB_GP
kthread (rcuog) to be serviced.
Usually a local wake up happening while running the idle task is handled
in one of the need_resched() checks carefully placed within the idle
loop that can break to the scheduler.
Unfortunately the call to rcu_idle_enter() is already beyond the last
generic need_resched() check and we may halt the CPU with a resched
request unhandled, leaving the task hanging.
Fix this with splitting the rcuog wakeup handling from rcu_idle_enter()
and place it before the last generic need_resched() check in the idle
loop. It is then assumed that no call to call_rcu() will be performed
after that in the idle loop until the CPU is put in low power mode.
Fixes: 96d3fd0d315a (rcu: Break call_rcu() deadlock involving scheduler and perf)
Reported-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20210131230548.32970-3-frederic@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 54b7429efffc99e845ba9381bee3244f012a06c2 upstream.
Deferred wakeup of rcuog kthreads upon RCU idle mode entry is going to
be handled differently whether initiated by idle, user or guest. Prepare
with pulling that control up to rcu_eqs_enter() callers.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20210131230548.32970-2-frederic@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 1b04fa9900263b4e217ca2509fd778b32c2b4eb2 ]
PowerPC testing encountered boot failures due to RCU Tasks not being
fully initialized until core_initcall() time. This commit therefore
initializes RCU Tasks (along with Rude RCU and RCU Tasks Trace) just
before early_initcall() time, thus allowing waiting on RCU Tasks grace
periods from early_initcall() handlers.
Link: https://lore.kernel.org/rcu/87eekfh80a.fsf@dja-thinkpad.axtens.net/
Fixes: 36dadef23fcc ("kprobes: Init kprobes in early_initcall")
Tested-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 56292e8609e39537297a7468dda4d87b9bd81d6a ]
The current memmory-allocation interface causes the following difficulties
for kvfree_rcu():
a) If built with CONFIG_PROVE_RAW_LOCK_NESTING, the lockdep will
complain about violation of the nesting rules, as in "BUG: Invalid
wait context". This Kconfig option checks for proper raw_spinlock
vs. spinlock nesting, in particular, it is not legal to acquire a
spinlock_t while holding a raw_spinlock_t.
This is a problem because kfree_rcu() uses raw_spinlock_t whereas the
"page allocator" internally deals with spinlock_t to access to its
zones. The code also can be broken from higher level of view:
<snip>
raw_spin_lock(&some_lock);
kfree_rcu(some_pointer, some_field_offset);
<snip>
b) If built with CONFIG_PREEMPT_RT, spinlock_t is converted into
sleeplock. This means that invoking the page allocator from atomic
contexts results in "BUG: scheduling while atomic".
c) Please note that call_rcu() is already invoked from raw atomic context,
so it is only reasonable to expaect that kfree_rcu() and kvfree_rcu()
will also be called from atomic raw context.
This commit therefore defers page allocation to a clean context using the
combination of an hrtimer and a workqueue. The hrtimer stage is required
in order to avoid deadlocks with the scheduler. This deferred allocation
is required only when kvfree_rcu()'s per-CPU page cache is empty.
Link: https://lore.kernel.org/lkml/20200630164543.4mdcf6zb4zfclhln@linutronix.de/
Fixes: 3042f83f19be ("rcu: Support reclaim for head-less object")
Reported-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d2098b4440981705e844c50254540ba7b5f82795 ]
Kim reported that perf-ftrace made his box unhappy. It turns out that
commit:
ff5c4f5cad33 ("rcu/tree: Mark the idle relevant functions noinstr")
removed one too many notrace qualifiers, probably due to there not being
a helpful comment.
This commit therefore reinstates the notrace and adds a comment to avoid
losing it again.
[ paulmck: Apply Steven Rostedt's feedback on the comment. ]
Fixes: ff5c4f5cad33 ("rcu/tree: Mark the idle relevant functions noinstr")
Reported-by: Kim Phillips <kim.phillips@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6dbce04d8417ae706596366e16841d77c454ba52 ]
Eugenio managed to tickle #PF from NMI context which resulted in
hitting a WARN in RCU through irqentry_enter() ->
__rcu_irq_enter_check_tick().
However, this situation is perfectly sane and does not warrant an
WARN. The #PF will (necessarily) be atomic and not require messing
with the tick state, so early return is correct. This commit
therefore removes the WARN.
Fixes: aaf2bc50df1f ("rcu: Abstract out rcu_irq_enter_check_tick() from rcu_nmi_enter()")
Reported-by: "Eugenio Pérez" <eupm90@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull RCU fix from Paul McKenney:
"A single commit that fixes a bug that was introduced a couple of merge
windows ago, but which rather more recently converged to an
agreed-upon fix. The bug is that interrupts can be incorrectly enabled
while holding an irq-disabled spinlock. This can of course result in
self-deadlocks.
The bug is a bit difficult to trigger. It requires that a preempted
task be blocking a preemptible-RCU grace period long enough to trigger
an RCU CPU stall warning. In addition, an interrupt must occur at just
the right time, and that interrupt's handler must acquire that same
irq-disabled spinlock. Still, a deadlock is a deadlock.
Furthermore, we do now have a fix, and that fix survives kernel test
robot, -next, and rcutorture testing. It has also been verified by
Sebastian as fixing the bug. Therefore..."
* 'urgent-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
rcu: Don't invoke try_invoke_on_locked_down_task() with irqs disabled
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
- Spectre/Meltdown safelisting for some Qualcomm KRYO cores
- Fix RCU splat when failing to online a CPU due to a feature mismatch
- Fix a recently introduced sparse warning in kexec()
- Fix handling of CPU erratum 1418040 for late CPUs
- Ensure hot-added memory falls within linear-mapped region
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: cpu_errata: Apply Erratum 845719 to KRYO2XX Silver
arm64: proton-pack: Add KRYO2XX silver CPUs to spectre-v2 safe-list
arm64: kpti: Add KRYO2XX gold/silver CPU cores to kpti safelist
arm64: Add MIDR value for KRYO2XX gold/silver CPU cores
arm64/mm: Validate hotplug range before creating linear mapping
arm64: smp: Tell RCU about CPUs that fail to come online
arm64: psci: Avoid printing in cpu_psci_cpu_die()
arm64: kexec_file: Fix sparse warning
arm64: errata: Fix handling of 1418040 with late CPU onlining
|
|
The try_invoke_on_locked_down_task() function requires that
interrupts be enabled, but it is called with interrupts disabled from
rcu_print_task_stall(), resulting in an "IRQs not enabled as expected"
diagnostic. This commit therefore updates rcu_print_task_stall()
to accumulate a list of the first few tasks while holding the current
leaf rcu_node structure's ->lock, then releases that lock and only then
uses try_invoke_on_locked_down_task() to attempt to obtain per-task
detailed information. Of course, as soon as ->lock is released, the
task might exit, so the get_task_struct() function is used to prevent
the task structure from going away in the meantime.
Link: https://lore.kernel.org/lkml/000000000000903d5805ab908fc4@google.com/
Fixes: 5bef8da66a9c ("rcu: Add per-task state to RCU CPU stall warnings")
Reported-by: syzbot+cb3b69ae80afd6535b0e@syzkaller.appspotmail.com
Reported-by: syzbot+f04854e1c5c9e913cc27@syzkaller.appspotmail.com
Tested-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
Commit ce3d31ad3cac ("arm64/smp: Move rcu_cpu_starting() earlier") ensured
that RCU is informed early about incoming CPUs that might end up calling
into printk() before they are online. However, if such a CPU fails the
early CPU feature compatibility checks in check_local_cpu_capabilities(),
then it will be powered off or parked without informing RCU, leading to
an endless stream of stalls:
| rcu: INFO: rcu_preempt detected stalls on CPUs/tasks:
| rcu: 2-O...: (0 ticks this GP) idle=002/1/0x4000000000000000 softirq=0/0 fqs=2593
| (detected by 0, t=5252 jiffies, g=9317, q=136)
| Task dump for CPU 2:
| task:swapper/2 state:R running task stack: 0 pid: 0 ppid: 1 flags:0x00000028
| Call trace:
| ret_from_fork+0x0/0x30
Ensure that the dying CPU invokes rcu_report_dead() prior to being powered
off or parked.
Cc: Qian Cai <cai@redhat.com>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Suggested-by: Qian Cai <cai@redhat.com>
Link: https://lore.kernel.org/r/20201105222242.GA8842@willie-the-truck
Link: https://lore.kernel.org/r/20201106103602.9849-3-will@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Some architectures assume that the stopped CPUs don't make function calls
to traceable functions when they are in the stopped state. See also commit
cb9d7fd51d9f ("watchdog: Mark watchdog touch functions as notrace").
Violating this assumption causes kernel crashes when switching tracer on
RISC-V.
Mark rcu_momentary_dyntick_idle() and stop_machine_yield() notrace to
prevent this.
Fixes: 4ecf0a43e729 ("processor: get rid of cpu_relax_yield")
Fixes: 366237e7b083 ("stop_machine: Provide RCU quiescent state in multi_cpu_stop()")
Signed-off-by: Zong Li <zong.li@sifive.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Atish Patra <atish.patra@wdc.com>
Tested-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20201021073839.43935-1-zong.li@sifive.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RCU changes from Ingo Molnar:
- Debugging for smp_call_function()
- RT raw/non-raw lock ordering fixes
- Strict grace periods for KASAN
- New smp_call_function() torture test
- Torture-test updates
- Documentation updates
- Miscellaneous fixes
[ This doesn't actually pull the tag - I've dropped the last merge from
the RCU branch due to questions about the series. - Linus ]
* tag 'core-rcu-2020-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (77 commits)
smp: Make symbol 'csd_bug_count' static
kernel/smp: Provide CSD lock timeout diagnostics
smp: Add source and destination CPUs to __call_single_data
rcu: Shrink each possible cpu krcp
rcu/segcblist: Prevent useless GP start if no CBs to accelerate
torture: Add gdb support
rcutorture: Allow pointer leaks to test diagnostic code
rcutorture: Hoist OOM registry up one level
refperf: Avoid null pointer dereference when buf fails to allocate
rcutorture: Properly synchronize with OOM notifier
rcutorture: Properly set rcu_fwds for OOM handling
torture: Add kvm.sh --help and update help message
rcutorture: Add CONFIG_PROVE_RCU_LIST to TREE05
torture: Update initrd documentation
rcutorture: Replace HTTP links with HTTPS ones
locktorture: Make function torture_percpu_rwsem_init() static
torture: document --allcpus argument added to the kvm.sh script
rcutorture: Output number of elapsed grace periods
rcutorture: Remove KCSAN stubs
rcu: Remove unused "cpu" parameter from rcu_report_qs_rdp()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull documentation updates from Mauro Carvalho Chehab:
"A series of patches addressing warnings produced by make htmldocs.
This includes:
- kernel-doc markup fixes
- ReST fixes
- Updates at the build system in order to support newer versions of
the docs build toolchain (Sphinx)
After this series, the number of html build warnings should reduce
significantly, and building with Sphinx 3.1 or later should now be
supported (although it is still recommended to use Sphinx 2.4.4).
As agreed with Jon, I should be sending you a late pull request by the
end of the merge window addressing remaining issues with docs build,
as there are a number of warning fixes that depends on pull requests
that should be happening along the merge window.
The end goal is to have a clean htmldocs build on Kernel 5.10.
PS. It should be noticed that Sphinx 3.0 is not currently supported,
as it lacks support for C domain namespaces. Such feature, needed in
order to document uAPI system calls with Sphinx 3.x, was added only on
Sphinx 3.1"
* tag 'docs/v5.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (75 commits)
PM / devfreq: remove a duplicated kernel-doc markup
mm/doc: fix a literal block markup
workqueue: fix a kernel-doc warning
docs: virt: user_mode_linux_howto_v2.rst: fix a literal block markup
Input: sparse-keymap: add a description for @sw
rcu/tree: docs: document bkvcache new members at struct kfree_rcu_cpu
nl80211: docs: add a description for s1g_cap parameter
usb: docs: document altmode register/unregister functions
kunit: test.h: fix a bad kernel-doc markup
drivers: core: fix kernel-doc markup for dev_err_probe()
docs: bio: fix a kerneldoc markup
kunit: test.h: solve kernel-doc warnings
block: bio: fix a warning at the kernel-doc markups
docs: powerpc: syscall64-abi.rst: fix a malformed table
drivers: net: hamradio: fix document location
net: appletalk: Kconfig: Fix docs location
dt-bindings: fix references to files converted to yaml
memblock: get rid of a :c:type leftover
math64.h: kernel-docs: Convert some markups into normal comments
media: uAPI: buffer.rst: remove a left-over documentation
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
- Add redirect_neigh() BPF packet redirect helper, allowing to limit
stack traversal in common container configs and improving TCP
back-pressure.
Daniel reports ~10Gbps => ~15Gbps single stream TCP performance gain.
- Expand netlink policy support and improve policy export to user
space. (Ge)netlink core performs request validation according to
declared policies. Expand the expressiveness of those policies
(min/max length and bitmasks). Allow dumping policies for particular
commands. This is used for feature discovery by user space (instead
of kernel version parsing or trial and error).
- Support IGMPv3/MLDv2 multicast listener discovery protocols in
bridge.
- Allow more than 255 IPv4 multicast interfaces.
- Add support for Type of Service (ToS) reflection in SYN/SYN-ACK
packets of TCPv6.
- In Multi-patch TCP (MPTCP) support concurrent transmission of data on
multiple subflows in a load balancing scenario. Enhance advertising
addresses via the RM_ADDR/ADD_ADDR options.
- Support SMC-Dv2 version of SMC, which enables multi-subnet
deployments.
- Allow more calls to same peer in RxRPC.
- Support two new Controller Area Network (CAN) protocols - CAN-FD and
ISO 15765-2:2016.
- Add xfrm/IPsec compat layer, solving the 32bit user space on 64bit
kernel problem.
- Add TC actions for implementing MPLS L2 VPNs.
- Improve nexthop code - e.g. handle various corner cases when nexthop
objects are removed from groups better, skip unnecessary
notifications and make it easier to offload nexthops into HW by
converting to a blocking notifier.
- Support adding and consuming TCP header options by BPF programs,
opening the doors for easy experimental and deployment-specific TCP
option use.
- Reorganize TCP congestion control (CC) initialization to simplify
life of TCP CC implemented in BPF.
- Add support for shipping BPF programs with the kernel and loading
them early on boot via the User Mode Driver mechanism, hence reusing
all the user space infra we have.
- Support sleepable BPF programs, initially targeting LSM and tracing.
- Add bpf_d_path() helper for returning full path for given 'struct
path'.
- Make bpf_tail_call compatible with bpf-to-bpf calls.
- Allow BPF programs to call map_update_elem on sockmaps.
- Add BPF Type Format (BTF) support for type and enum discovery, as
well as support for using BTF within the kernel itself (current use
is for pretty printing structures).
- Support listing and getting information about bpf_links via the bpf
syscall.
- Enhance kernel interfaces around NIC firmware update. Allow
specifying overwrite mask to control if settings etc. are reset
during update; report expected max time operation may take to users;
support firmware activation without machine reboot incl. limits of
how much impact reset may have (e.g. dropping link or not).
- Extend ethtool configuration interface to report IEEE-standard
counters, to limit the need for per-vendor logic in user space.
- Adopt or extend devlink use for debug, monitoring, fw update in many
drivers (dsa loop, ice, ionic, sja1105, qed, mlxsw, mv88e6xxx,
dpaa2-eth).
- In mlxsw expose critical and emergency SFP module temperature alarms.
Refactor port buffer handling to make the defaults more suitable and
support setting these values explicitly via the DCBNL interface.
- Add XDP support for Intel's igb driver.
- Support offloading TC flower classification and filtering rules to
mscc_ocelot switches.
- Add PTP support for Marvell Octeontx2 and PP2.2 hardware, as well as
fixed interval period pulse generator and one-step timestamping in
dpaa-eth.
- Add support for various auth offloads in WiFi APs, e.g. SAE (WPA3)
offload.
- Add Lynx PHY/PCS MDIO module, and convert various drivers which have
this HW to use it. Convert mvpp2 to split PCS.
- Support Marvell Prestera 98DX3255 24-port switch ASICs, as well as
7-port Mediatek MT7531 IP.
- Add initial support for QCA6390 and IPQ6018 in ath11k WiFi driver,
and wcn3680 support in wcn36xx.
- Improve performance for packets which don't require much offloads on
recent Mellanox NICs by 20% by making multiple packets share a
descriptor entry.
- Move chelsio inline crypto drivers (for TLS and IPsec) from the
crypto subtree to drivers/net. Move MDIO drivers out of the phy
directory.
- Clean up a lot of W=1 warnings, reportedly the actively developed
subsections of networking drivers should now build W=1 warning free.
- Make sure drivers don't use in_interrupt() to dynamically adapt their
code. Convert tasklets to use new tasklet_setup API (sadly this
conversion is not yet complete).
* tag 'net-next-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2583 commits)
Revert "bpfilter: Fix build error with CONFIG_BPFILTER_UMH"
net, sockmap: Don't call bpf_prog_put() on NULL pointer
bpf, selftest: Fix flaky tcp_hdr_options test when adding addr to lo
bpf, sockmap: Add locking annotations to iterator
netfilter: nftables: allow re-computing sctp CRC-32C in 'payload' statements
net: fix pos incrementment in ipv6_route_seq_next
net/smc: fix invalid return code in smcd_new_buf_create()
net/smc: fix valid DMBE buffer sizes
net/smc: fix use-after-free of delayed events
bpfilter: Fix build error with CONFIG_BPFILTER_UMH
cxgb4/ch_ipsec: Replace the module name to ch_ipsec from chcr
net: sched: Fix suspicious RCU usage while accessing tcf_tunnel_info
bpf: Fix register equivalence tracking.
rxrpc: Fix loss of final ack on shutdown
rxrpc: Fix bundle counting for exclusive connections
netfilter: restore NF_INET_NUMHOOKS
ibmveth: Identify ingress large send packets.
ibmveth: Switch order of ibmveth_helper calls.
cxgb4: handle 4-tuple PEDIT to NAT mode translation
selftests: Add VRF route leaking tests
...
|
|
Changeset 53c72b590b3a ("rcu/tree: cache specified number of objects")
added new members for struct kfree_rcu_cpu, but didn't add the
corresponding at the kernel-doc markup, as repoted when doing
"make htmldocs":
./kernel/rcu/tree.c:3113: warning: Function parameter or member 'bkvcache' not described in 'kfree_rcu_cpu'
./kernel/rcu/tree.c:3113: warning: Function parameter or member 'nr_bkv_objs' not described in 'kfree_rcu_cpu'
So, move the description for bkvcache to kernel-doc, and add a
description for nr_bkv_objs.
Fixes: 53c72b590b3a ("rcu/tree: cache specified number of objects")
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull debugobjects updates from Thomas Gleixner:
"A small set of updates for debug objects:
- Make all debug object descriptors constant. There is no reason to
have them writeable.
- Free the per CPU object pool after CPU unplug to avoid memory
waste"
* tag 'core-debugobjects-2020-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
debugobjects: Free per CPU pool after CPU unplug
treewide: Make all debug_obj_descriptors const
debugobjects: Allow debug_obj_descr to be const
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu into core/rcu
Pull v5.10 RCU changes from Paul E. McKenney:
- Debugging for smp_call_function().
- Strict grace periods for KASAN. The point of this series is to find
RCU-usage bugs, so the corresponding new RCU_STRICT_GRACE_PERIOD
Kconfig option depends on both DEBUG_KERNEL and RCU_EXPERT, and is
further disabled by dfefault. Finally, the help text includes
a goodly list of scary caveats.
- New smp_call_function() torture test.
- Torture-test updates.
- Documentation updates.
- Miscellaneous fixes.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Rejecting non-native endian BTF overlapped with the addition
of support for it.
The rest were more simple overlapping changes, except the
renesas ravb binding update, which had to follow a file
move as well as a YAML conversion.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix more fallout of recent RCU-lockdep changes in CPU idle code
and two devfreq issues.
Specifics:
- Export rcu_idle_{enter,exit} to modules to fix build issues
introduced by recent RCU-lockdep fixes (Borislav Petkov)
- Add missing return statement to a stub function in the ACPI
processor driver to fix a build issue introduced by recent
RCU-lockdep fixes (Rafael Wysocki)
- Fix recently introduced suspicious RCU usage warnings in the PSCI
cpuidle driver and drop stale comments regarding RCU_NONIDLE()
usage from enter_s2idle_proper() (Ulf Hansson)
- Fix error code path in the tegra30 devfreq driver (Dan Carpenter)
- Add missing information to devfreq_summary debugfs (Chanwoo Choi)"
* tag 'pm-5.9-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: processor: Fix build for ARCH_APICTIMER_STOPS_ON_C3 unset
PM / devfreq: tegra30: Disable clock on error in probe
PM / devfreq: Add timer type to devfreq_summary debugfs
cpuidle: Drop misleading comments about RCU usage
cpuidle: psci: Fix suspicious RCU usage
rcu/tree: Export rcu_idle_{enter,exit} to modules
|
|
This should make it harder for the kernel to corrupt the debug object
descriptor, used to call functions to fixup state and track debug objects,
by moving the structure to read-only memory.
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20200815004027.2046113-3-swboyd@chromium.org
|
|
Fix this link error:
ERROR: modpost: "rcu_idle_enter" [drivers/acpi/processor.ko] undefined!
ERROR: modpost: "rcu_idle_exit" [drivers/acpi/processor.ko] undefined!
when CONFIG_ACPI_PROCESSOR is built as module. PeterZ says that in light
of ARM needing those soon too, they should simply be exported.
Fixes: 1fecfdbb7acc ("ACPI: processor: Take over RCU-idle for C3-BM idle")
Reported-by: Sven Joachim <svenjoac@gmx.de>
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Paul E. McKenney <paulmckrcu@kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
