| Age | Commit message (Collapse) | Author |
|---|
|
Svyatoslav Ryhel <clamor95@gmail.com> says:
Add support for auxiliary devices, such as amplifiers, sound-muxes or dsp,
to be added to the sound card.
Link: https://patch.msgid.link/20261013180253.477605-1-clamor95@gmail.com
|
|
Change the CS35L56/57/62/63 entries in codec_info_list[] to use
the OT25 DAI for amp feedback.
The AMP feedback was incorrectly using a DAI connected to DP3,
but that is reserved for SDCA companion amp. The correct amp
output is DP4, which is the SDCA OT25 feedback output.
Fixes: 898cd43bde307 ("ASoC: intel: sof_sdw: Add support for CS35L63 into machine driver")
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20261005155235.1386525-3-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
asoc_sdw_rt711_exit() drops the reference held in ctx->headset_codec_dev
but leaves the pointer populated. If the card cleanup path reaches the
exit hook more than once after a failed or deferred probe, a later
invocation reuses the stale pointer and calls put_device() again,
underflowing the refcount and leading to oopses when later probe,
driver bind, or suspend paths walk the SoundWire bus after the device
reference was released. Observed as boot- and suspend-time oopses on an
arm64 platform with an RT712 headset codec, reproducible
deterministically by repeated machine-driver probe cycling with the
codec drivers unloaded.
Clear the pointer after put_device() so repeated cleanup becomes a
no-op, which also makes the existing NULL check at the top of the exit
hook effective. This matches what commit 046173b98de3 ("ASoC: sdw_utils:
fix double put_device() on aggregated amps") did for the aggregated amp
references.
Fixes: 811648340707 ("ASoC: Intel: sof_sdw: avoid oops in error handling")
Cc: stable@vger.kernel.org
Signed-off-by: David Cemin <dcemin@nvidia.com>
Link: https://patch.msgid.link/20260912182131.1156475-1-dcemin@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This patch adds the codec_info and route-related settings.
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Link: https://patch.msgid.link/20260924-rt766-v2-2-e0b63606a5e8@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The RT721_U and RT718 variants share most of the register layout and
driver behavior with RT721. Extend the existing RT721 driver to
recognize these variants and apply variant-specific settings where
required.
Signed-off-by: Oder Chiou <oder_chiou@realtek.com>
Link: https://patch.msgid.link/20260917104244.2512641-1-oder_chiou@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Christian Marangi <ansuelsmth@gmail.com> says:
Add all the patch and documentation to support Airoha AN7581
sound driver.
The card follows similar implementation with Mediatek with
the codec present on i2c but with a simplified implementation
register wise and additional frequency supported.
Link: https://patch.msgid.link/20260908090448.3332-1-ansuelsmth@gmail.com
|
|
Delete the asoc_sdw_cs_spk_feedback_rtd_init(). This is not needed now
that the ASoC bug it was working around has been fixed. And it was broken
anyway because it didn't match the way the core SoundWire code mapped
codec channels to frame bitslots.
This code was added to avoid a problem where multiple codec DP outputs
were mapped to the same SoundWire frame bit slot. This would allow a
user to break the SoundWire bus just by enabling mixer outputs using
ALSA controls.
As no production system has used the capture stream, this workaround
was of little consequence and the problem of conflicting DP mappings
was not investigated.
The ASoC bug that enabled too many channels on each codec has now been
fixed. So this workaround can be completely deleted.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20260910114500.1586637-6-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
In asoc_sdw_hw_params() set the codec_ch_mask member of struct
snd_soc_dai_link_ch_map for capture streams. ASoC will then pass the
correct number of channels to each codec hw_params(). This prevents
trying to enable more channels on the codec DP than have been allocated
bitslots in the SoundWire frame, which would cause bus clash errors.
In theory codec_ch_mask could also be set for playback streams, but for
those the CPU is the only sender so there is no risk of bus clash.
For playback streams codec_ch_mask is set to 0 to preserve the existing
behavior and avoid introducing bugs.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20260910114500.1586637-5-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Rename the ch_mask member of snd_soc_dai_link_ch_map to cpu_ch_mask,
as that is what it is used for.
The CPU and codec channel masks are not necessarily the same, and are
quite likely different. SoundWire and I2S/TDM both support assigning
different sample slots to each codec, so for example channel 0 on each
codec could map to different channels at the CPU. So it's quite normal
that the channel mask at the CPU end is different for each codec, but
the codec channel masks are the same for each codec.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20260910114500.1586637-2-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add sof_sdw helpers for SN624x jack, amp, and DMIC, and register the
codec_info entries used by the Intel SOF SoundWire machine driver.
Use name_prefix "sn624x" to match UCM and DAI widget naming.
Signed-off-by: Qianghua Wang <qianghua.wang@senarytech.com>
Link: https://patch.msgid.link/766c70645ad35ef446aa7078a2600c3361994e71.1788230065.git.qianghua.wang@senarytech.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
* With component_name set in the codec_info_list DAI entries,
"amixer -D hw:<card> info" includes the 'spk' identifier for
each tac5xx2 speaker component. This allows userspace to
identify the speaker codec at runtime and enables UCM
card matching for the tac5xx2 family.
* Set component_name for the speaker, mic, and UAJ DAI
entries for all tac5xx2 family variants.
Signed-off-by: Niranjan H Y <niranjan.hy@ti.com>
Link: https://patch.msgid.link/20260820115114.1203-1-niranjan.hy@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Andrey Golovko <andrey.golovko@gmail.com> says:
v1 was a single patch that powered the SDCA Function up in the port
PRE_PREP callback:
https://lore.kernel.org/all/20260813001500.9218-1-andrey.golovko@gmail.com/
Mark asked whether that does the right thing when userspace restarts the
stream with SNDRV_PCM_IOCTL_RESUME instead of preparing it, and pointed
out that a stream can also be suspended while prepared; Vijendar agreed.
The answer to the first question is no, and it is reproducible on this
machine, so v2 adds a patch to fix that path. The second case turns out
to be a wider gap that neither patch closes; it is described at the end.
Measured on an ASUS ProArt PX13 HN7306EAC (AMD ACP7.0, two TAS2783 on
SDW1). A test program plays a 440/660 Hz tone straight to the hw
device, the machine goes through an s2idle cycle, and on -ESTRPIPE the
program calls snd_pcm_resume() only - never snd_pcm_prepare(). The tone
is measured through the internal microphone against the noise floor of
the same run, and the peripheral registers are read out of band.
With v1 alone (broonie/sound for-next + v1):
before suspend after snd_pcm_resume()
DP1 PrepareCtrl 0x1 / 0x2 0x0 / 0x0
PDE23 req / act 0x0 / 0x0 0x3 / 0x3
tone 440 / 660 Hz +65.5 / +75.2 dB -1.7 / +1.8 dB
snd_pcm_resume() returned 0 and the PCM stayed RUNNING, so nothing in
the stack reported a failure - the speakers were simply silent. The
ports were never prepared again, so the PRE_PREP callback v1 relies on
was never reached.
With this series:
before suspend after snd_pcm_resume()
DP1 PrepareCtrl 0x1 / 0x2 0x1 / 0x2
PDE23 req / act 0x0 / 0x0 0x0 / 0x0
tone 440 / 660 Hz +73.7 / +88.3 dB +73.7 / +88.5 dB
ChannelEn also moved to the other bank across the cycle, as it should
when the ports are prepared afresh.
The ordinary path is unaffected. The same test recovering with
snd_pcm_prepare() instead of snd_pcm_resume(), on the same build, gives
+79.8 / +86.9 dB after the cycle with the ports prepared and the bank
switched back.
This also explains the negative test Robin Everaars reported for v1 on
the same board earlier today: playback opened without an error, both
amplifiers stayed attached, and the speakers were silent - which is what
this path looks like from userspace.
The case this series does not cover
===================================
A stream that is suspended while merely PREPARED never sees a trigger at
all: snd_pcm_do_suspend() returns early when the stream is not running,
and snd_pcm_do_resume() returns early unless the suspended state was
RUNNING or DRAINING. Userspace then calls snd_pcm_start(), the ports
are enabled, and the peripheral has lost its port state without anything
in the path noticing. Patch 1 cannot help there - the SoundWire stream
is still SDW_STREAM_PREPARED, so sdw_prepare_stream() is a no-op by
design - and neither can the codec, which has no way to tell the core
that its ports went away.
The bus does know: the peripheral goes UNATTACHED and comes back
uninitialized. Making that invalidate the prepared state of the streams
it takes part in looks like the right place to me, but it is a core
change and I have not written it. Say if it belongs in this series.
Link: https://patch.msgid.link/20260813194000.10412-1-andrey.golovko@gmail.com
|
|
A peripheral loses its Data Port configuration when the controller is
power-gated during system suspend, so the ports have to be prepared
again before the stream can be enabled. That happens on its own when
userspace calls snd_pcm_prepare() after SNDRV_PCM_STATE_SUSPENDED, but
an application is also allowed to restart the stream with
SNDRV_PCM_IOCTL_RESUME on a card that advertises SNDRV_PCM_INFO_RESUME,
as the AMD ACP platforms do. That path only reaches the trigger
callback, sdw_enable_stream() writes the channels of ports that were
never prepared, and playback silently produces nothing: the PCM keeps
running, no error is reported anywhere, and the speakers stay quiet
until the stream is torn down and set up again.
Prepare the stream on SNDRV_PCM_TRIGGER_RESUME, before enabling it.
The SoundWire core expects exactly this: sdw_prepare_stream() accepts a
disabled stream and then reapplies the bus parameters without
recomputing them, which it documents as the resume case.
Signed-off-by: Andrey Golovko <andrey.golovko@gmail.com>
Link: https://patch.msgid.link/20260813194000.10412-2-andrey.golovko@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
In aggregation mode with two identical amplifiers,
a stress test that repeatedly triggers card unbind/rebind
can hit a NULL pointer dereference during the exit path.
ctx->amp_dev1 / ctx->amp_dev2 are single shared resources,
so the release must be safe against being called more than once.
Clear each pointer after put_device() so a second invocation
becomes a no-op, this could address NULL pointer dereference issue.
Signed-off-by: Jack Yu <jack.yu@realtek.com>
Link: https://patch.msgid.link/20260818023018.2564212-1-jack.yu@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
A temporary refcount management of a struct device can be done
gracefully with __clean(put_device) for avoiding potential leaks.
No functional change but just a code cleanup.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20260803135648.917760-1-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Richard Fitzgerald <rf@opensource.cirrus.com> says:
The Cirrus Logic CS35L62 amp is similar to the CS35L63 and can be
supported by adding the chip IDs into the cs35l56 driver. It must
also be added to the codec table in sdw_utils.
Link: https://patch.msgid.link/20260715120135.939280-1-rf@opensource.cirrus.com
|
|
CS35L62 is very similar to CS35L63, and uses the same driver, so we
can use the same configuration.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20260715120135.939280-3-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
We can avoid to use *card. Tidyup it.
Current code makes old style / new style conversion difficult.
To make future conversions easier to understand, this patch clean up the
code a little. but no functional change.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://patch.msgid.link/87ik75etxw.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
count_sidecar() is not using *card. Tidyup it.
Current code makes old style / new style conversion difficult.
To make future conversions easier to understand, this patch clean up the
code a little. but no functional change.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://patch.msgid.link/87jyrlety1.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
commit 87a3f5c8ac20 ("ASoC: sdw_utils: cs42l43: allow spk component names
to be combined") moved spk:cs42l43-spk generation from rtd_init() into
the asoc_sdw_rtd_init() generic path by adding component_name to
codec_info_list entries. However, only the 0x4243 cs42l43 entry was
updated; the 0x2A3B entry (vendor_id 0x01fa, Cirrus Logic cs42l43 with
sidecar bridge) was missed.
Without component_name on the 0x2A3B dp6 DAI, asoc_sdw_rtd_init() never
accumulates spk_components and never appends 'spk:cs42l43-spk' (or its
sidecar alias 'spk:cs35l56-bridge') to card->components. The sof-soundwire
UCM regex ' spk:([a-z0-9]+...)' then fails to match, causing WirePlumber
to mark all HiFi profiles as unavailable=no and fall back to the Off
profile — resulting in Dummy Output in GNOME.
The existing sidecar redirect in asoc_sdw_rtd_init() already handles the
SOC_SDW_SIDECAR_AMPS case: when component_name is 'cs42l43-spk' and
sidecar amps are active, it substitutes 'cs35l56-bridge' into
card->components, which matches the existing cs35l56-bridge.conf UCM file.
Fixes: 87a3f5c8ac20 ("ASoC: sdw_utils: cs42l43: allow spk component names to be combined")
Signed-off-by: Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Link: https://patch.msgid.link/20260610041753.1151088-1-acelan.kao@canonical.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Added component_name for UCM.
Signed-off-by: Baojun Xu <baojun.xu@ti.com>
Link: https://patch.msgid.link/20260611125359.19839-1-baojun.xu@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Bard Liao <yung-chuan.liao@linux.intel.com> says:
This series sets is_amp to all amp type codecs in codec_info_list[].
So that we can use the flag directly instead of using a local flag to
check if the codec is an AMP type. The flag will be used to set
different name_prefix for amp and non-amp codecs.
Link: https://patch.msgid.link/20260605101805.121428-1-yung-chuan.liao@linux.intel.com
|
|
The is_amp flag will be used for the codec name_prefix.
We detect it by checking if the codec support endpoints other than amp.
However, it is not accurate. Currently, the is_amp flag is only set to
the amps that include other types of endpoints. But it can't cover the
case that a monolithic codec that only the amp endpoint is present.
Add the is_amp flag to all amp type codecs and will set the name_prefix
by the flag in the follow up commit.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20260605101805.121428-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
commit 42d99857d6f0 ("ASoC: core: Move all users to deferrable card binding")
converted the -EPROBE_DEFER return value of snd_soc_bind_card() to 0
which results in the machine driver probe return 0 and will not be
called again when any component is not yet registered.
We get the right component name from the registered components
and use it in the dai links. It will lead to bind fail if the default
component name is used. Return -EPROBE_DEFER to allow the machine driver
probe again after the components are registered.
Suggested-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20260529014259.2528048-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Merge up the fixes to help CI.
|
|
Add ES9356 in codec_info_list
Signed-off-by: Zhang Yi <zhangyi@everest-semi.com>
Link: https://patch.msgid.link/20260513031554.5422-3-zhangyi@everest-semi.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add a utility program for handling ES9356 in the universal machine driver
Signed-off-by: Zhang Yi <zhangyi@everest-semi.com>
Link: https://patch.msgid.link/20260513031554.5422-2-zhangyi@everest-semi.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Remove unnecessary checks for scnprintf() return values in
asoc_sdw_ti_add_tac5xx2_routes(). The function scnprintf() never
returns negative values and cannot return zero given the format
strings used ("%s SPK_L" and "%s SPK_R").
The existing length validation at line 110 already ensures that
name_prefix won't cause buffer overflow, and scnprintf() guarantees
null-termination even in case of truncation.
Fixes: e812de61e9a0 ("ASoC: sdw_utils: TI amp utility for tac5xx2 family")
Reported-by: Dan Carpenter <error27@gmail.com>
Closes: https://lore.kernel.org/linux-sound/agF8GBcHYUaGJbXY@stanley.mountain/
Signed-off-by: Niranjan H Y <niranjan.hy@ti.com>
Link: https://patch.msgid.link/20260513015542.2420-1-niranjan.hy@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
devm_kasprintf() can fail while building the temporary speaker
component string. If that happens, spk_components is set to NULL, but
the current code can still pass it to strlen() on a later loop iteration
or after the loop when appending the speaker component list to
card->components.
Use NULL to represent the initial "no speaker components" state, and
return -ENOMEM immediately if building spk_components fails.
Fixes: 0f60ecffbfe3 ("ASoC: sdw_utils: generate combined spk components string")
Signed-off-by: Cássio Gabriel <cassiogabrielcontato@gmail.com>
Link: https://patch.msgid.link/20260512-asoc-sdw-utils-spk-components-alloc-v1-1-c9bbd6d2e123@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Bard Liao <yung-chuan.liao@linux.intel.com> says:
ASoC: soc_sdw_utils: skip aux device if it is not present
Similarly to codec endpoints that may not be used [1], aux devices (like
HID) also may not be used. Hence skip aux devices which are not present.
Also update the comment above is_sdca_endpoint_present().
[1] https://lore.kernel.org/all/20250414063239.85200-12-yung-chuan.liao@linux.intel.com/
Link: https://patch.msgid.link/20260508094750.1246796-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Update the comment above is_sdca_endpoint_present().
Signed-off-by: Maciej Strozek <mstrozek@opensource.cirrus.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20260508094750.1246796-3-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Similarly to codec endpoints that may not be used [1], aux devices (like
HID) also may not be used. Hence skip aux devices which are not present.
[1] https://lore.kernel.org/all/20250414063239.85200-12-yung-chuan.liao@linux.intel.com/
Signed-off-by: Maciej Strozek <mstrozek@opensource.cirrus.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20260508094750.1246796-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add a quirk to skip the CODEC_MIC DAI when it is not present.
This ensures PCH_DMIC is used as the fallback; otherwise,
CODEC_MIC remains the default.
Fixes: 846a8d3cf3ba ("ASoC: Intel: soc-acpi-intel-ptl-match: Add rt721 support")
Signed-off-by: Mac Chiang <mac.chiang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20260508093224.1246282-3-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Some devices do not use CODEC_MIC but use the host PCH_DMIC
instead. Add a quirk to skip the CODEC_MIC DAI when it is not present
in disco table, ensuring the correct capture device is used.
If CODEC_MIC is present, it continues to be used as default.
Fixes: 9489db97f6f0 ("ASoC: sdw_utils: add SmartMic DAI for RT712 VB")
Signed-off-by: Mac Chiang <mac.chiang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20260508093224.1246282-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Marco Crivellari <marco.crivellari@suse.com> says:
Currently the code uses the per-cpu workqueue system_long_wq to schedule
long running works.
Unbound works could benefit from scheduler task placement, to optimize
performance and power consumption. Another good reason to have this unbound,
is the "queue_delayed_work()" function, used to enqueue the work item.
More details on this will follow in the next section.
Recently, a new unbound workqueue specific for long running work has been
added:
c116737e972e ("workqueue: Add system_dfl_long_wq for long unbound works")
~~~ Details about queue_delayed_work ~~~
system_long_wq is a per-cpu workqueue and it is used as a parameter of
queue_delayed_work(). This function schedule an item that it will later
be enqueued (once the timer will fire). __queue_delayed_work() does the job
receiving as "cpu" WORK_CPU_UNBOUND:
if (housekeeping_enabled(HK_TYPE_TIMER)) {
// [....]
} else {
if (likely(cpu == WORK_CPU_UNBOUND))
add_timer_global(timer);
else
add_timer_on(timer, cpu);
}
The timer is global, so can fire everywhere, and the work item will be
enqueued where the timer fired.
Since the workqueue work doesn't rely on per-cpu variables, there is no
obvious reason that justify the use of a per-cpu workqueue. So change the
workqueue with the new system_dfl_long_wq, so that the used workqueue is
now unbound and can benefit from scheduler task placement.
|
|
Add TI amp utility for supporting the tac5xx2 family
of devices to support tac5572, tac5672, tac5682 and
tas2883
Signed-off-by: Niranjan H Y <niranjan.hy@ti.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20260505111806.2280-4-niranjan.hy@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Treat the companion amp as generic AMP until full support for companion
amp is added.
Signed-off-by: Derek Fang <derek.fang@realtek.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20260430121043.552241-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Move handling of cs42l43-spk component string into SOF mechanism [1]
which will allow it to be aggregated with other speakers.
Likewise handle the cs35l56-bridge special case which should not be
combined to keep compatibility with UCM.
Link: https://github.com/thesofproject/linux/pull/5445 [1]
Link: https://github.com/alsa-project/alsa-ucm-conf/pull/747
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Maciej Strozek <mstrozek@opensource.cirrus.com>
Suggested-by: Aaron Ma <aaron.ma@canonical.com>
Tested-by: Aaron Ma <aaron.ma@canonical.com>
Link: https://patch.msgid.link/20260420114823.194226-1-mstrozek@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
In certain setups of cs42l43 UAJ function may be removed from ACPI and
physically unconnected. Prepare a driver for that configuration by
setting a system clock in the speaker path too.
Signed-off-by: Maciej Strozek <mstrozek@opensource.cirrus.com>
Link: https://patch.msgid.link/20260403082335.40798-1-mstrozek@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add 'rt1320-aif2' dai infos for rt1320 and rt1321 dmic function.
Signed-off-by: Derek Fang <derek.fang@realtek.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20260326075303.1083567-4-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
struct asoc_sdw_codec_info has part_id which is not
sufficient to uniquely identify devices. This change
adds the vendor_id field and updates the codec_info
list with the corresponding vendor id as per the
Manufacturer's id in https://mid.mipi.org/
Signed-off-by: Niranjan H Y <niranjan.hy@ti.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20260324041300.784-1-niranjan.hy@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The index could change if any endpoint is not present. Remove the index
and let the machine driver get the right codec name from the registered
components.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20260316010308.285622-3-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Currently the index is 0. In theory, it will not change even if any
other endpoint is not present. But to be consistent and avoid surprise,
remove the index and let the machine driver match the codec name
partially.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20260316010308.285622-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The cs42l49 is an audio codec with integrated MIPI SoundWire interface
(Version 1.2.1 compliant) with SDCA v1.0 support, I2C, and I2S/TDM
interfaces designed for portable applications.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20260313160858.2022849-3-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add codec_info for a new variant of CS42L43. It can resue existing info
but needs a new part_id.
Signed-off-by: Maciej Strozek <mstrozek@opensource.cirrus.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20260306152829.3130530-2-mstrozek@opensource.cirrus.com
Tested-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Merge series from Bard Liao <yung-chuan.liao@linux.intel.com>:
Currently, we set a predefined codec component name in a DAI link. But
the codec name may contain an index which is not fixed. This series
suggest using partial match the codec name to fix the issue.
|
|
The index is not fixed and it will lead to the DAI link can't bind the
codec component with the name when the index is different from the
predefined one.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://patch.msgid.link/20260225135004.2322987-4-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Currently, we can set codec name in the dai info which will be set as
the codec component name in a DAI link. However, the codec name may
not be fixed. For example, there is an index in a SDCA codec name and
that is not fixed. Lookup the fixed codec name string from the component
list to get the right component name to ensure the DAI link will bind
to the right codec component.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://patch.msgid.link/20260225135004.2322987-3-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add a device info entry for the Cirrus Logic CS47L47.
CS47L47 has UAJ (headset speaker + mic + jack detect) and DMICs.
The audio ports are similar to the CS42L45 so can be based on the
CS42L45 code.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20260223150256.326143-3-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
When the device uses the host DMIC as the capture source, add CODEC_MIC
quirk to exclude the RT722 codec DMIC DAI link.
Signed-off-by: Mac Chiang <mac.chiang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20260125111837.2386530-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
