| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools
Pull perf tools updates from Namhyung Kim:
"Perf event/metric description:
Unify all event and metric descriptions in JSON format. Now event
parsing and handling is greatly simplified by that.
From users point of view, perf list will provide richer information
about hardware events like the following.
$ perf list hw
List of pre-defined events (to be used in -e or -M):
legacy hardware:
branch-instructions
[Retired branch instructions [This event is an alias of branches]. Unit: cpu]
branch-misses
[Mispredicted branch instructions. Unit: cpu]
branches
[Retired branch instructions [This event is an alias of branch-instructions]. Unit: cpu]
bus-cycles
[Bus cycles,which can be different from total cycles. Unit: cpu]
cache-misses
[Cache misses. Usually this indicates Last Level Cache misses; this is intended to be used in conjunction with the
PERF_COUNT_HW_CACHE_REFERENCES event to calculate cache miss rates. Unit: cpu]
cache-references
[Cache accesses. Usually this indicates Last Level Cache accesses but this may vary depending on your CPU. This may include
prefetches and coherency messages; again this depends on the design of your CPU. Unit: cpu]
cpu-cycles
[Total cycles. Be wary of what happens during CPU frequency scaling [This event is an alias of cycles]. Unit: cpu]
cycles
[Total cycles. Be wary of what happens during CPU frequency scaling [This event is an alias of cpu-cycles]. Unit: cpu]
instructions
[Retired instructions. Be careful,these can be affected by various issues,most notably hardware interrupt counts. Unit: cpu]
ref-cycles
[Total cycles; not affected by CPU frequency scaling. Unit: cpu]
But most notable changes would be in the perf stat. On the right side,
the default metrics are better named and aligned. :)
$ perf stat -- perf test -w noploop
Performance counter stats for 'perf test -w noploop':
11 context-switches # 10.8 cs/sec cs_per_second
0 cpu-migrations # 0.0 migrations/sec migrations_per_second
3,612 page-faults # 3532.5 faults/sec page_faults_per_second
1,022.51 msec task-clock # 1.0 CPUs CPUs_utilized
110,466 branch-misses # 0.0 % branch_miss_rate (88.66%)
6,934,452,104 branches # 6781.8 M/sec branch_frequency (88.66%)
4,657,032,590 cpu-cycles # 4.6 GHz cycles_frequency (88.65%)
27,755,874,218 instructions # 6.0 instructions insn_per_cycle (89.03%)
TopdownL1 # 0.3 % tma_backend_bound
# 9.3 % tma_bad_speculation (89.05%)
# 9.7 % tma_frontend_bound (77.86%)
# 80.7 % tma_retiring (88.81%)
1.025318171 seconds time elapsed
1.013248000 seconds user
0.012014000 seconds sys
Deferred unwinding support:
With the kernel support (commit c69993ecdd4d: "perf: Support deferred
user unwind"), perf can use deferred callchains for userspace stack
trace with frame pointers like below:
$ perf record --call-graph fp,defer ...
This will be transparent to users when it comes to other commands like
perf report and perf script. They will merge the deferred callchains
to the previous samples as if they were collected together.
ARM SPE updates
- Extensive enhancements to support various kinds of memory
operations including GCS, MTE allocation tags, memcpy/memset,
register access, and SIMD operations.
- Add inverted data source filter (inv_data_src_filter) support to
exclude certain data sources.
- Improve documentation.
Vendor event updates:
- Intel: Updated event files for Sierra Forest, Panther Lake, Meteor
Lake, Lunar Lake, Granite Rapids, and others.
- Arm64: Added metrics for i.MX94 DDR PMU and Cortex-A720AE
definitions.
- RISC-V: Added JSON support for T-HEAD C920V2.
Misc:
- Improve pointer tracking in data type profiling. It'd give better
output when the variable is using container_of() to convert type.
- Annotation support for perf c2c report in TUI. Press 'a' key to
enter annotation view from cacheline browser window. This will show
which instruction is causing the cacheline contention.
- Lots of fixes and test coverage improvements!"
* tag 'perf-tools-for-v6.19-2025-12-06' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools: (214 commits)
libperf: Use 'extern' in LIBPERF_API visibility macro
perf stat: Improve handling of termination by signal
perf tests stat: Add test for error for an offline CPU
perf stat: When no events, don't report an error if there is none
perf tests stat: Add "--null" coverage
perf cpumap: Add "any" CPU handling to cpu_map__snprint_mask
libperf cpumap: Fix perf_cpu_map__max for an empty/NULL map
perf stat: Allow no events to open if this is a "--null" run
perf test kvm: Add some basic perf kvm test coverage
perf tests evlist: Add basic evlist test
perf tests script dlfilter: Add a dlfilter test
perf tests kallsyms: Add basic kallsyms test
perf tests timechart: Add a perf timechart test
perf tests top: Add basic perf top coverage test
perf tests buildid: Add purge and remove testing
perf tests c2c: Add a basic c2c
perf c2c: Clean up some defensive gets and make asan clean
perf jitdump: Fix missed dso__put
perf mem-events: Don't leak online CPU map
perf hist: In init, ensure mem_info is put on error paths
...
|
|
When interrupting perf stat in repeat mode with a signal the signal is
passed to the child process but the repeat doesn't terminate:
```
$ perf stat -v --null --repeat 10 sleep 1
Control descriptor is not initialized
[ perf stat: executing run #1 ... ]
[ perf stat: executing run #2 ... ]
^Csleep: Interrupt
[ perf stat: executing run #3 ... ]
[ perf stat: executing run #4 ... ]
[ perf stat: executing run #5 ... ]
[ perf stat: executing run #6 ... ]
[ perf stat: executing run #7 ... ]
[ perf stat: executing run #8 ... ]
[ perf stat: executing run #9 ... ]
[ perf stat: executing run #10 ... ]
Performance counter stats for 'sleep 1' (10 runs):
0.9500 +- 0.0512 seconds time elapsed ( +- 5.39% )
0.01user 0.02system 0:09.53elapsed 0%CPU (0avgtext+0avgdata 18940maxresident)k
29944inputs+0outputs (0major+2629minor)pagefaults 0swaps
```
Terminate the repeated run and give a reasonable exit value:
```
$ perf stat -v --null --repeat 10 sleep 1
Control descriptor is not initialized
[ perf stat: executing run #1 ... ]
[ perf stat: executing run #2 ... ]
[ perf stat: executing run #3 ... ]
^Csleep: Interrupt
Performance counter stats for 'sleep 1' (10 runs):
0.680 +- 0.321 seconds time elapsed ( +- 47.16% )
Command exited with non-zero status 130
0.00user 0.01system 0:02.05elapsed 0%CPU (0avgtext+0avgdata 70688maxresident)k
0inputs+0outputs (0major+5002minor)pagefaults 0swaps
```
Note, this also changes the exit value for non-repeat runs when
interrupted by a signal.
Reported-by: Ingo Molnar <mingo@kernel.org>
Closes: https://lore.kernel.org/lkml/aS5wjmbAM9ka3M2g@gmail.com/
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Add a test that if an offline CPU is requested perf stat will fail.
$ perf test -vv "perf stat tests"
101: perf stat tests:
--- start ---
test child forked, pid 46965
Basic stat command test
Basic stat command test [Success]
Null stat command test
Null stat command test [Success]
Offline CPU stat command test (cpu 8)
Offline CPU stat command test [Success]
stat record and report test
stat record and report test [Success]
stat record and script test
stat record and script test [Success]
stat repeat weak groups test
stat repeat weak groups test [Success]
Topdown event group test
Topdown event group test [Success]
Topdown weak groups test
Topdown weak groups test [Skipped event parsing failed]
cputype test
cputype test [Success]
hybrid test
hybrid test [Success]
---- end(0) ----
101: perf stat tests : Ok
Reported-by: Thomas Richter <tmricht@linux.ibm.com>
Closes: https://lore.kernel.org/linux-perf-users/94313b82-888b-4f42-9fb0-4585f9e90080@linux.ibm.com/
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Events may fail to open as no supported CPUs were specified on the
command line. In this case a confusing "error" message of "success"
can be reported. Let's skip the error in that case.
Before:
```
$ perf stat -C2048 -e cycles -- true
WARNING: A requested CPU in '2048' is not supported by PMU 'cpu' (CPUs 0-7) for event 'cycles'
Error:
No supported events found.
The sys_perf_event_open() syscall returned with 0 (Success) for event (cpu/unknown-hardware/).
"dmesg | grep -i perf" may provide additional information.
```
After:
```
$ perf stat -C2048 -e cycles -- true
WARNING: A requested CPU in '2048' is not supported by PMU 'cpu' (CPUs 0-7) for event 'cycles'
Error:
No supported events found.
```
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Ensure "--null" does a minimal run.
Reported-by: Ingo Molnar <mingo@kernel.org>
Closes: https://lore.kernel.org/linux-perf-users/aSwt7yzFjVJCEmVp@gmail.com/
Tested-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
If the perf_cpu_map is empty or is just the any CPU value, then early
return. Don't process the "any" CPU when creating the bitmap.
Tested-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
It is intended that a "--null" run doesn't open any events.
Fixes: 2cc7aa995ce9 ("perf stat: Refactor retry/skip/fatal error handling")
Tested-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Replace busylock at the Tx queuing layer with a lockless list.
Resulting in a 300% (4x) improvement on heavy TX workloads, sending
twice the number of packets per second, for half the cpu cycles.
- Allow constantly busy flows to migrate to a more suitable CPU/NIC
queue.
Normally we perform queue re-selection when flow comes out of idle,
but under extreme circumstances the flows may be constantly busy.
Add sysctl to allow periodic rehashing even if it'd risk packet
reordering.
- Optimize the NAPI skb cache, make it larger, use it in more paths.
- Attempt returning Tx skbs to the originating CPU (like we already
did for Rx skbs).
- Various data structure layout and prefetch optimizations from Eric.
- Remove ktime_get() from the recvmsg() fast path, ktime_get() is
sadly quite expensive on recent AMD machines.
- Extend threaded NAPI polling to allow the kthread busy poll for
packets.
- Make MPTCP use Rx backlog processing. This lowers the lock
pressure, improving the Rx performance.
- Support memcg accounting of MPTCP socket memory.
- Allow admin to opt sockets out of global protocol memory accounting
(using a sysctl or BPF-based policy). The global limits are a poor
fit for modern container workloads, where limits are imposed using
cgroups.
- Improve heuristics for when to kick off AF_UNIX garbage collection.
- Allow users to control TCP SACK compression, and default to 33% of
RTT.
- Add tcp_rcvbuf_low_rtt sysctl to let datacenter users avoid
unnecessarily aggressive rcvbuf growth and overshot when the
connection RTT is low.
- Preserve skb metadata space across skb_push / skb_pull operations.
- Support for IPIP encapsulation in the nftables flowtable offload.
- Support appending IP interface information to ICMP messages (RFC
5837).
- Support setting max record size in TLS (RFC 8449).
- Remove taking rtnl_lock from RTM_GETNEIGHTBL and RTM_SETNEIGHTBL.
- Use a dedicated lock (and RCU) in MPLS, instead of rtnl_lock.
- Let users configure the number of write buffers in SMC.
- Add new struct sockaddr_unsized for sockaddr of unknown length,
from Kees.
- Some conversions away from the crypto_ahash API, from Eric Biggers.
- Some preparations for slimming down struct page.
- YAML Netlink protocol spec for WireGuard.
- Add a tool on top of YAML Netlink specs/lib for reporting commonly
computed derived statistics and summarized system state.
Driver API:
- Add CAN XL support to the CAN Netlink interface.
- Add uAPI for reporting PHY Mean Square Error (MSE) diagnostics, as
defined by the OPEN Alliance's "Advanced diagnostic features for
100BASE-T1 automotive Ethernet PHYs" specification.
- Add DPLL phase-adjust-gran pin attribute (and implement it in
zl3073x).
- Refactor xfrm_input lock to reduce contention when NIC offloads
IPsec and performs RSS.
- Add info to devlink params whether the current setting is the
default or a user override. Allow resetting back to default.
- Add standard device stats for PSP crypto offload.
- Leverage DSA frame broadcast to implement simple HSR frame
duplication for a lot of switches without dedicated HSR offload.
- Add uAPI defines for 1.6Tbps link modes.
Device drivers:
- Add Motorcomm YT921x gigabit Ethernet switch support.
- Add MUCSE driver for N500/N210 1GbE NIC series.
- Convert drivers to support dedicated ops for timestamping control,
and away from the direct IOCTL handling. While at it support GET
operations for PHY timestamping.
- Add (and convert most drivers to) a dedicated ethtool callback for
reading the Rx ring count.
- Significant refactoring efforts in the STMMAC driver, which
supports Synopsys turn-key MAC IP integrated into a ton of SoCs.
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- support PPS in/out on all pins
- Intel (100G, ice, idpf):
- ice: implement standard ethtool and timestamping stats
- i40e: support setting the max number of MAC addresses per VF
- iavf: support RSS of GTP tunnels for 5G and LTE deployments
- nVidia/Mellanox (mlx5):
- reduce downtime on interface reconfiguration
- disable being an XDP redirect target by default (same as
other drivers) to avoid wasting resources if feature is
unused
- Meta (fbnic):
- add support for Linux-managed PCS on 25G, 50G, and 100G links
- Wangxun:
- support Rx descriptor merge, and Tx head writeback
- support Rx coalescing offload
- support 25G SPF and 40G QSFP modules
- Ethernet virtual:
- Google (gve):
- allow ethtool to configure rx_buf_len
- implement XDP HW RX Timestamping support for DQ descriptor
format
- Microsoft vNIC (mana):
- support HW link state events
- handle hardware recovery events when probing the device
- Ethernet NICs consumer, and embedded:
- usbnet: add support for Byte Queue Limits (BQL)
- AMD (amd-xgbe):
- add device selftests
- NXP (enetc):
- add i.MX94 support
- Broadcom integrated MACs (bcmgenet, bcmasp):
- bcmasp: add support for PHY-based Wake-on-LAN
- Broadcom switches (b53):
- support port isolation
- support BCM5389/97/98 and BCM63XX ARL formats
- Lantiq/MaxLinear switches:
- support bridge FDB entries on the CPU port
- use regmap for register access
- allow user to enable/disable learning
- support Energy Efficient Ethernet
- support configuring RMII clock delays
- add tagging driver for MaxLinear GSW1xx switches
- Synopsys (stmmac):
- support using the HW clock in free running mode
- add Eswin EIC7700 support
- add Rockchip RK3506 support
- add Altera Agilex5 support
- Cadence (macb):
- cleanup and consolidate descriptor and DMA address handling
- add EyeQ5 support
- TI:
- icssg-prueth: support AF_XDP
- Airoha access points:
- add missing Ethernet stats and link state callback
- add AN7583 support
- support out-of-order Tx completion processing
- Power over Ethernet:
- pd692x0: preserve PSE configuration across reboots
- add support for TPS23881B devices
- Ethernet PHYs:
- Open Alliance OATC14 10BASE-T1S PHY cable diagnostic support
- Support 50G SerDes and 100G interfaces in Linux-managed PHYs
- micrel:
- support for non PTP SKUs of lan8814
- enable in-band auto-negotiation on lan8814
- realtek:
- cable testing support on RTL8224
- interrupt support on RTL8221B
- motorcomm: support for PHY LEDs on YT853
- microchip: support for LAN867X Rev.D0 PHYs w/ SQI and cable diag
- mscc: support for PHY LED control
- CAN drivers:
- m_can: add support for optional reset and system wake up
- remove can_change_mtu() obsoleted by core handling
- mcp251xfd: support GPIO controller functionality
- Bluetooth:
- add initial support for PASTa
- WiFi:
- split ieee80211.h file, it's way too big
- improvements in VHT radiotap reporting, S1G, Channel Switch
Announcement handling, rate tracking in mesh networks
- improve multi-radio monitor mode support, and add a cfg80211
debugfs interface for it
- HT action frame handling on 6 GHz
- initial chanctx work towards NAN
- MU-MIMO sniffer improvements
- WiFi drivers:
- RealTek (rtw89):
- support USB devices RTL8852AU and RTL8852CU
- initial work for RTL8922DE
- improved injection support
- Intel:
- iwlwifi: new sniffer API support
- MediaTek (mt76):
- WED support for >32-bit DMA
- airoha NPU support
- regdomain improvements
- continued WiFi7/MLO work
- Qualcomm/Atheros:
- ath10k: factory test support
- ath11k: TX power insertion support
- ath12k: BSS color change support
- ath12k: statistics improvements
- brcmfmac: Acer A1 840 tablet quirk
- rtl8xxxu: 40 MHz connection fixes/support"
* tag 'net-next-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1381 commits)
net: page_pool: sanitise allocation order
net: page pool: xa init with destroy on pp init
net/mlx5e: Support XDP target xmit with dummy program
net/mlx5e: Update XDP features in switch channels
selftests/tc-testing: Test CAKE scheduler when enqueue drops packets
net/sched: sch_cake: Fix incorrect qlen reduction in cake_drop
wireguard: netlink: generate netlink code
wireguard: uapi: generate header with ynl-gen
wireguard: uapi: move flag enums
wireguard: uapi: move enum wg_cmd
wireguard: netlink: add YNL specification
selftests: drv-net: Fix tolerance calculation in devlink_rate_tc_bw.py
selftests: drv-net: Fix and clarify TC bandwidth split in devlink_rate_tc_bw.py
selftests: drv-net: Set shell=True for sysfs writes in devlink_rate_tc_bw.py
selftests: drv-net: Use Iperf3Runner in devlink_rate_tc_bw.py
selftests: drv-net: introduce Iperf3Runner for measurement use cases
selftests: drv-net: Add devlink_rate_tc_bw.py to TEST_PROGS
net: ps3_gelic_net: Use napi_alloc_skb() and napi_gro_receive()
Documentation: net: dsa: mention simple HSR offload helpers
Documentation: net: dsa: mention availability of RedBox
...
|
|
Setup qemu with KVM then run kvm stat and some host
recording/reporting/build-id tests.
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Add test that evlist reports expected events from perf record.
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Compile a simple dlfilter and make sure it remove samples from
everything other than a test_loop.
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Add test that kallsyms finds a well known symbol and fails for
another.
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Basic coverage for `perf timechart` doing a record and then a basic
sanity test of the generated SVG file.
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
The test starts a backgroup thloop workload and monitors it using
cpu-clock ensuring test_loop appears in the output.
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Add testing for the purge and remove commands. Use the noploop
workload rather than just a return to avoid missing samples in the
workload in perf record. Tidy up the cleanup code to cleanup when
signals happen.
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Add basic c2c record and report testing to gain some coverage.
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
To deal with histogram code that had missing gets the c2c code had
some defensive gets. Those other issues were cleaned up by the
reference count checker, clean them up for the c2c command here.
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Reference count checking caught a missing dso__put following a
machine__findnew_dso_id.
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Reference count checking found the online CPU map was being gotten but
not put. Add in the missing put.
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Rather than exit the internal map_symbols directly, put the mem-info
that does this and also lowers the reference count on the mem-info
itself otherwise the mem-info is being leaked.
Fixes: 56e144fe98260a0f ("perf mem_info: Add and use map_symbol__exit and addr_map_symbol__exit")
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Move nsinfo__zput from cleanup_perf_probe_events to
clear_perf_probe_event so it is always executed. Clean up
clear_perf_probe_events to not call nsinfo__zput and use the pev
variable to avoid repeated array accesses.
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Add missing dso__put for the dso created in maps__split_kallsyms.
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
In dso__process_kernel_symbol if inserting a map fails, probably
ENOMEM, then the reference count puts were missing on the dso and map.
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
The '-o' option exists for the SVG creation but not for `perf
timechart record`. Add to better allow testing.
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
There are 2 slots left for kvm_add_default_arch_event, fix the
assertion so that debug builds don't fail the assert and to agree with
the comment.
Fixes: 45ff39f6e70aa55d0 ("perf tools kvm: Fix the potential out of range memory access issue")
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
The updated events were published in:
https://github.com/intel/perfmon/commit/445e38f5128592f8b5c38da30267fff025e37613
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
The updated events were published in:
https://github.com/intel/perfmon/commit/6edacf434dffa046435de2f6a182c00df3cf4edc
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
The updated events were published in:
https://github.com/intel/perfmon/commit/348f33fae477f281812c32e1c07812b7e35614dd
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
The updated events were published in:
https://github.com/intel/perfmon/commit/09a0c74b23b5d20adf1f97e5022856568d05494c
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
The updated events were published in:
https://github.com/intel/perfmon/commit/dc6ffee20c74bfd21d7a7e338345578d4b7ca9ca
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
The updated events were published in:
https://github.com/intel/perfmon/commit/b4acc3fd520eb098db41083010b65b75ae906c96
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
The updated metrics were published in:
https://github.com/intel/perfmon/pull/348/commits/2dce436130ddfb8b442fc373d103f970de26cb78
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
The updated events were published in:
https://github.com/intel/perfmon/commit/588dd77675039e1aaacee27a414cbcf3625c58a3
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
The updated events were published in:
https://github.com/intel/perfmon/commit/c74f1cefa94d224cb3338507961b59d8a2a1c4e9
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Add the following CPU variants to the list for data source decoding:
- Cortex-A715 [1]
- Cortex-A78C [2]
- Cortex-X1 [3]
- Cortex-X4 [4]
- Neoverse V3 [5]
[1] https://developer.arm.com/documentation/101590/0103/Statistical-Profiling-Extension-Support/Statistical-Profiling-Extension-data-source-packet
[2] https://developer.arm.com/documentation/102226/0002/Debug-descriptions/Statistical-Profiling-Extension/implementation-defined-features-of-SPE
[3] https://developer.arm.com/documentation/101433/0102/Debug-descriptions/Statistical-Profiling-Extension/implementation-defined-features-of-SPE
[4] https://developer.arm.com/documentation/102484/0003/Statistical-Profiling-Extension-support/Statistical-Profiling-Extension-data-source-packet
[5] https://developer.arm.com/documentation/107734/0002/Statistical-Profiling-Extension-support/Statistical-Profiling-Extension-data-source-packet
Signed-off-by: Leo Yan <leo.yan@arm.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
In 754187ad73b73bcb ("perf build: Remove NO_AUXTRACE build option")
sys/types.h was removed, which broke the build in all Alpine Linux
releases, as musl libc has pid_t defined via sys/types.h, add it back.
Fixes: 754187ad73b73bcb ("perf build: Remove NO_AUXTRACE build option")
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Create a fake root directory for /proc/{version,modules,kallsyms} in
/tmp for testing. The kallsyms has a bad symbol in the module and it
causes the main map splitted. The test ensures it only has two maps -
kernel and the module and it finds the initial map after the module
without creating the split maps like [kernel].0 and so on.
$ perf test -vv "split kallsyms"
69: split kallsyms:
--- start ---
test child forked, pid 1016196
try to create fake root directory
create kernel maps from the fake root directory
maps__set_modules_path_dir: cannot open /tmp/perf-test.Zrv6Sy/lib/modules/X.Y.Z dir
Problems setting modules path maps, continuing anyway...
Failed to open /tmp/perf-test.Zrv6Sy/proc/kcore. Note /proc/kcore requires CAP_SYS_RAWIO capability to access.
Using /tmp/perf-test.Zrv6Sy/proc/kallsyms for symbols
kernel map loaded - check symbol and map
---- end(0) ----
69: split kallsyms : Ok
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
This is for test functions to find the kallsyms correctly. It can find
the machine from the kernel maps and use its root_dir. This is helpful
to setup fake /proc directory for testing.
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
In maps__split_kallsyms(), it assumes new kernel map when it finds a
symbol without module after any module and the initial kernel map has
some symbols. Because it expects modules are out of the kernel map so
modules should not have symbols in the kernel map.
For example, the following memory map shows symbols and maps. Any
symbols in the module 1 area will go to the module 1. The main kernel
map starts at 0xffffffffbc200000. But if any symbol has a module
between the symbols in that area, next symbols after 0xffffffffbd008000
will generate new kernel maps like [kernel].1.
kernel address | |
| |
0xffffffffc0000000 |---------------------|
| (symbols) |
| ... | <--- [kernel].N
0xffffffffbc400000 |---------------------|
| (symbols) |
| module 2 | <--- bad?
0xffffffffbc380000 |---------------------|
| ... |
| (symbols) |
| [kernel.kallsyms] | <--- initial map
0xffffffffbc200000 |---------------------|
| |
| |
0xffffffffabcde000 |---------------------|
| (symbols) |
| module 1 |
0xffffffffabcd0000 |---------------------|
This is very fragile when the module has a symbol that falls into the
main kernel map for some reason. My system has a livepatch module with
such symbols. And it created a lot of new kernel maps after those
symbols. But the symbol may have broken addresses and the later symbols
can still be found in the initial kernel map.
Let's check the symbol address in the initial map and use it if found.
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
It's counted twice as it's increased after calling maps__insert(). I
guess we want to increase it only after it's added properly.
Reviewed-by: Ian Rogers <irogers@google.com>
Fixes: 2e538c4a1847291cf ("perf tools: Improve kernel/modules symbol lookup")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
The maps__split_kallsyms() will split symbols to module DSOs if it comes
from a module. It also handled some unusual kernel symbols after modules
by creating new kernel maps like "[kernel].0".
But they are pseudo DSOs to have those unexpected symbols. They should
not be considered as unloaded kernel DSOs. Otherwise the dso__load()
for them will end up calling dso__load_kallsyms() and then
maps__split_kallsyms() again and again.
Reviewed-by: Ian Rogers <irogers@google.com>
Fixes: 2e538c4a1847291cf ("perf tools: Improve kernel/modules symbol lookup")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
It's possible that some kernel samples don't have matching deferred
callchain records when the profiling session was ended before the
threads came back to userspace. Let's flush the samples before
finish the session.
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Save samples with deferred callchains in a separate list and deliver
them after merging the user callchains. If users don't want to merge
they can set tool->merge_deferred_callchains to false to prevent the
behavior.
With previous result, now perf script will show the merged callchains.
$ perf script
...
pwd 2312 121.163435: 249113 cpu/cycles/P:
ffffffff845b78d8 __build_id_parse.isra.0+0x218 ([kernel.kallsyms])
ffffffff83bb5bf6 perf_event_mmap+0x2e6 ([kernel.kallsyms])
ffffffff83c31959 mprotect_fixup+0x1e9 ([kernel.kallsyms])
ffffffff83c31dc5 do_mprotect_pkey+0x2b5 ([kernel.kallsyms])
ffffffff83c3206f __x64_sys_mprotect+0x1f ([kernel.kallsyms])
ffffffff845e6692 do_syscall_64+0x62 ([kernel.kallsyms])
ffffffff8360012f entry_SYSCALL_64_after_hwframe+0x76 ([kernel.kallsyms])
7f18fe337fa7 mprotect+0x7 (/lib/x86_64-linux-gnu/ld-linux-x86-64.so.2)
7f18fe330e0f _dl_sysdep_start+0x7f (/lib/x86_64-linux-gnu/ld-linux-x86-64.so.2)
7f18fe331448 _dl_start_user+0x0 (/lib/x86_64-linux-gnu/ld-linux-x86-64.so.2)
...
The old output can be get using --no-merge-callchain option.
Also perf report can get the user callchain entry at the end.
$ perf report --no-children --stdio -q -S __build_id_parse.isra.0
# symbol: __build_id_parse.isra.0
8.40% pwd [kernel.kallsyms]
|
---__build_id_parse.isra.0
perf_event_mmap
mprotect_fixup
do_mprotect_pkey
__x64_sys_mprotect
do_syscall_64
entry_SYSCALL_64_after_hwframe
mprotect
_dl_sysdep_start
_dl_start_user
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Handle the deferred callchains in the script output.
$ perf script
...
pwd 2312 121.163435: 249113 cpu/cycles/P:
ffffffff845b78d8 __build_id_parse.isra.0+0x218 ([kernel.kallsyms])
ffffffff83bb5bf6 perf_event_mmap+0x2e6 ([kernel.kallsyms])
ffffffff83c31959 mprotect_fixup+0x1e9 ([kernel.kallsyms])
ffffffff83c31dc5 do_mprotect_pkey+0x2b5 ([kernel.kallsyms])
ffffffff83c3206f __x64_sys_mprotect+0x1f ([kernel.kallsyms])
ffffffff845e6692 do_syscall_64+0x62 ([kernel.kallsyms])
ffffffff8360012f entry_SYSCALL_64_after_hwframe+0x76 ([kernel.kallsyms])
b00000006 (cookie) ([unknown])
pwd 2312 121.163447: DEFERRED CALLCHAIN [cookie: b00000006]
7f18fe337fa7 mprotect+0x7 (/lib/x86_64-linux-gnu/ld-linux-x86-64.so.2)
7f18fe330e0f _dl_sysdep_start+0x7f (/lib/x86_64-linux-gnu/ld-linux-x86-64.so.2)
7f18fe331448 _dl_start_user+0x0 (/lib/x86_64-linux-gnu/ld-linux-x86-64.so.2)
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Add a new callchain record mode option for deferred callchains. For now
it only works with FP (frame-pointer) mode.
And add the missing feature detection logic to clear the flag on old
kernels.
$ perf record --call-graph fp,defer -vv true
...
------------------------------------------------------------
perf_event_attr:
type 0 (PERF_TYPE_HARDWARE)
size 136
config 0 (PERF_COUNT_HW_CPU_CYCLES)
{ sample_period, sample_freq } 4000
sample_type IP|TID|TIME|CALLCHAIN|PERIOD
read_format ID|LOST
disabled 1
inherit 1
mmap 1
comm 1
freq 1
enable_on_exec 1
task 1
sample_id_all 1
mmap2 1
comm_exec 1
ksymbol 1
bpf_event 1
defer_callchain 1
defer_output 1
------------------------------------------------------------
sys_perf_event_open: pid 162755 cpu 0 group_fd -1 flags 0x8
sys_perf_event_open failed, error -22
switching off deferred callchain support
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Add a new event type for deferred callchains and a new callback for the
struct perf_tool. For now it doesn't actually handle the deferred
callchains but it just marks the sample if it has the PERF_CONTEXT_
USER_DEFFERED in the callchain array.
At least, perf report can dump the raw data with this change. Actually
this requires the next commit to enable attr.defer_callchain, but if you
already have a data file, it'll show the following result.
$ perf report -D
...
0x2158@perf.data [0x40]: event: 22
.
. ... raw event: size 64 bytes
. 0000: 16 00 00 00 02 00 40 00 06 00 00 00 0b 00 00 00 ......@.........
. 0010: 03 00 00 00 00 00 00 00 a7 7f 33 fe 18 7f 00 00 ..........3.....
. 0020: 0f 0e 33 fe 18 7f 00 00 48 14 33 fe 18 7f 00 00 ..3.....H.3.....
. 0030: 08 09 00 00 08 09 00 00 e6 7a e7 35 1c 00 00 00 .........z.5....
121163447014 0x2158 [0x40]: PERF_RECORD_CALLCHAIN_DEFERRED(IP, 0x2): 2312/2312: 0xb00000006
... FP chain: nr:3
..... 0: 00007f18fe337fa7
..... 1: 00007f18fe330e0f
..... 2: 00007f18fe331448
: unhandled!
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
For metric groups, skip metrics in the list that are None. This allows
functions to better optionally return metrics.
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Thomas Falcon <thomas.falcon@intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Drop adding a pending metric if there is an existing one. Ensure the
PMUs differ for hybrid systems.
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Thomas Falcon <thomas.falcon@intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Have dedicated encode functions rather than having them embedded in
MetricGroup. This is to provide some uniformity in the Metric ToXXX
routines.
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Thomas Falcon <thomas.falcon@intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Allow threshold expressions for metrics to be generated.
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Thomas Falcon <thomas.falcon@intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
