| Age | Commit message (Collapse) | Author |
|---|
|
sysfs.sh DAMON selftest is not testing the existence of the 'pause' sysfs
file. Add the test.
Link: https://lore.kernel.org/20260522154026.80546-15-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Brendan Higgins <brendan.higgins@linux.dev>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
sysfs.sh DAMON selftest is not testing the existence of addr_unit sysfs
file. Add the test.
Link: https://lore.kernel.org/20260522154026.80546-14-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Brendan Higgins <brendan.higgins@linux.dev>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
sysfs.sh DAMON selftest is not testing monitoring intervals goal
directory. Add the test.
Link: https://lore.kernel.org/20260522154026.80546-13-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Brendan Higgins <brendan.higgins@linux.dev>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When an assertion is failed, sysfs.py DAMON selftest immediately exits the
test program leaving the DAMON running behind. Many of the following
tests need to start DAMON on their own. But because DAMON that was
started by sysfs.py is still running, those start attempts fail, and the
tests are failed or skipped. Update sysfs.py to stop DAMON before exiting
the test program due to the assertion failure.
Link: https://lore.kernel.org/20260522154026.80546-12-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Brendan Higgins <brendan.higgins@linux.dev>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Add simple existence tests for data probes sysfs directories and files.
Link: https://lore.kernel.org/20260518234119.97569-20-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: David Hildenbrand <david@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Liam R. Howlett <liam@infradead.org>
Cc: Lorenzo Stoakes <ljs@kernel.org>
Cc: "Masami Hiramatsu (Google)" <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The sysfs.py test commits DAMON parameters, dump the internal DAMON state,
and show if the parameters are committed as expected using the dumped
state. While the dumping is ongoing, DAMON is alive. It can make
internal changes including addition and removal of regions. It can
therefore make a race that can result in false test results. Pause DAMON
execution during the state dumping to avoid such races.
Link: https://lore.kernel.org/20260427151231.113429-11-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Brendan Higgins <brendan.higgins@linux.dev>
Cc: David Hildenbrand <david@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Liam R. Howlett <liam@infradead.org>
Cc: Lorenzo Stoakes <ljs@kernel.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Extend sysfs.py tests to confirm damon_ctx->pause can be set using the
pause sysfs file.
Link: https://lore.kernel.org/20260427151231.113429-10-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Brendan Higgins <brendan.higgins@linux.dev>
Cc: David Hildenbrand <david@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Liam R. Howlett <liam@infradead.org>
Cc: Lorenzo Stoakes <ljs@kernel.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
drgn_dump_damon_status is not dumping the damon_ctx->pause parameter
value, so it cannot be tested. Dump it for future tests.
Link: https://lore.kernel.org/20260427151231.113429-9-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Brendan Higgins <brendan.higgins@linux.dev>
Cc: David Hildenbrand <david@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Liam R. Howlett <liam@infradead.org>
Cc: Lorenzo Stoakes <ljs@kernel.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
DAMON test-purpose sysfs interface control Python module, _damon_sysfs, is
not supporting the newly added pause file. Add the support of the file,
for future test and use of the feature.
Link: https://lore.kernel.org/20260427151231.113429-8-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Brendan Higgins <brendan.higgins@linux.dev>
Cc: David Hildenbrand <david@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Liam R. Howlett <liam@infradead.org>
Cc: Lorenzo Stoakes <ljs@kernel.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This patch set introces a new action: DAMOS_COLLAPSE.
For DAMOS_HUGEPAGE and DAMOS_NOHUGEPAGE to work, khugepaged should be
working, since it relies on hugepage_madvise to add a new slot. This slot
should be picked up by khugepaged and eventually collapse (or not, if we
are using DAMOS_NOHUGEPAGE) the pages. If THP is not enabled, khugepaged
will not be working, and therefore no collapse will happen.
DAMOS_COLLAPSE eventually calls madvise_collapse, which will collapse the
address range synchronously. In cases where there is a large VMA
(databases, for example), DAMOS_COLLAPSE allows us to collapse only the
hot region, and not the entire VMA.
This new action may be required to support autotuning with hugepage
as a goal[1].
=========
Benchmarks:
=========
MySQL
=====
Tests were performed in an ARM physical server with MariaDB 10.5 and
sysbench. Read only benchmark was perform with gaussian row hitting,
which follows a normal distribution.
T n, D h: THP set to never, DAMON action set to hugepage
T m, D h: THP set to madvise, DAMON action set to hugepage
T n, D c: THP set to never, DAMON action set to collapse
Memory consumption. Lower is better.
+------------------+----------+----------+----------+
| | T n, D h | T m, D h | T n, D c |
+------------------+----------+----------+----------+
| Total memory use | 2.13 | 2.20 | 2.20 |
| Huge pages | 0 | 1.3 | 1.27 |
+------------------+----------+----------+----------+
Performance in TPS (Transactions Per Second). Higher is better.
T n, D h: 18225.58
T m, D h 18252.93
T n, D c: 18270.21
Performance counter
I got the number of L1 D/I TLB accesses and the number a D/I TLB
accesses that triggered a page walk. I divided the second by the
first to get the percentage of page walkes per TLB access. The
lower the better.
+---------------+--------------+--------------+--------------+
| | T n, D h | T m, D h | T n, D c |
+---------------+--------------+--------------+--------------+
| L1 DTLB | 127248242753 | 125431020479 | 125327001821 |
| L1 ITLB | 80332558619 | 79346759071 | 79298139590 |
| DTLB walk | 75011087 | 52800418 | 55895794 |
| ITLB walk | 71577076 | 71505137 | 67262140 |
| DTLB % misses | 0.058948623 | 0.042095183 | 0.044599961 |
| ITLB % misses | 0.089100954 | 0.090117275 | 0.084821839 |
+---------------+--------------+--------------+--------------+
Masim
=====
I used masim with the "demo" configuration, but changing the times
to 100 seconds for the initial phase and 50 seconds for the rest of
the phases.
Memory consumption:
+------------------+----------+----------+----------+
| | T n, D h | T m, D h | T n, D c |
+------------------+----------+----------+----------+
| Total memory use | 2.38 GB | 2.36 GB | 2.37 GB |
| Huge pages | 0 | 190 MB | 188 MB |
+------------------+----------+----------+----------+
Performance:
THP never, DAMOS_HUGEPAGE
initial phase: 40,491 accesses/msec, 100001 msecs run
low phase 0: 39,658 accesses/msec, 50002 msecs run
high phase 0: 41,678 accesses/msec, 50000 msecs run
low phase 1: 39,625 accesses/msec, 50003 msecs run
high phase 1: 41,658 accesses/msec, 50002 msecs run
low phase 2: 39,642 accesses/msec, 50002 msecs run
high phase 2: 41,640 accesses/msec, 50001 msecs run
THP madvise, DAMOS_HUGEPAGE
initial phase: 51,977 accesses/msec, 100000 msecs run
low phase 0: 86,953 accesses/msec, 50000 msecs run
high phase 0: 94,812 accesses/msec, 50000 msecs run
low phase 1: 101,017 accesses/msec, 50000 msecs run
high phase 1: 94,841 accesses/msec, 50000 msecs run
low phase 2: 100,993 accesses/msec, 50000 msecs run
high phase 2: 94,791 accesses/msec, 50001 msecs run
THP never, DAMOS_COLLAPSE
initial phase: 93,678 accesses/msec, 100001 msecs run
low phase 0: 101,475 accesses/msec, 50000 msecs run
high phase 0: 98,589 accesses/msec, 50000 msecs run
low phase 1: 101,531 accesses/msec, 50001 msecs run
high phase 1: 98,506 accesses/msec, 50001 msecs run
low phase 2: 101,458 accesses/msec, 50001 msecs run
high phase 2: 98,555 accesses/msec, 50000 msecs run
Memory consumption dynamic (how quickly collapses occur):
It shows in seconds how many huge pages are allocated.
+----+----------+----------+
| | T m, D h | T n, D c |
+----+----------+----------+
| 5 | 32 | 188 |
| 10 | 48 | 188 |
| 15 | 64 | 188 |
| 20 | 96 | 188 |
| 30 | 112 | 188 |
| 35 | 144 | 188 |
| 40 | 160 | 188 |
| 45 | 190 | 188 |
| 50 | 190 | 188 |
| 55 | 190 | 188 |
| 60 | 190 | 188 |
+----+----------+----------+
=========
- We can see that DAMOS "hugepage" action works only when THP is set
to madvise. "collapse" action works even when THP is set to never.
- Performance for "collapse" action is slightly lower than "hugepage"
action and THP madvise. This is due to the fact that collapases
occur synchronously. With "hugepage" they may occur during page
faults.
- Memory consumption is slighly lower for "collapse" than "hugepage"
with THP madvise. This is due to the khugepage collapses all VMAs,
while "collapse" action only collapses the VMAs in the hot region.
- There is an improvement in TLB utilization when collapse through
"hugepage" or "collapse" actions are triggered. The amount of
TLB misses is lower.
- "collapse" action is performance synchronously, which means that
page collapses happen earlier and more rapidly. This can be
useful or not, depending on the scenario.
- "hugepage" action may trigger a VMA split in some scenarios, since
it needs to change the flag of the VMA to THP enabled. This may
lead to additional overhead.
Collapse action just adds a new option to chose the correct system
balance.
Link: https://lore.kernel.org/20260426231619.107231-5-sj@kernel.org
Link: https://lore.kernel.org/damon/20260313000816.79933-1-sj@kernel.org/ [1]
Signed-off-by: Asier Gutierrez <gutierrez.asier@huawei-partners.com>
Signed-off-by: SeongJae Park <sj@kernel.org>
Reviewed-by: SeongJae Park <sj@kernel.org>
Cc: Cheng-Han Wu <hank20010209@gmail.com>
Cc: David Hildenbrand <david@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Liam R. Howlett <liam@infradead.org>
Cc: Liew Rui Yan <aethernet65535@gmail.com>
Cc: Lorenzo Stoakes <ljs@kernel.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Extend sysfs.py DAMON selftest to setup DAMOS action failed region quota
charge ratio and assert the setup is made into DAMON internal state.
Link: https://lore.kernel.org/20260428013402.115171-12-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Brendan Higgins <brendan.higgins@linux.dev>
Cc: David Hildenbrand <david@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Liam R. Howlett <liam@infradead.org>
Cc: Lorenzo Stoakes <ljs@kernel.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Extend drgn_dump_damon_status.py to dump DAMON internal state for DAMOS
action failed regions quota charge ratio, to be able to show if the
internal state for the feature is working, with future DAMON selftests.
Link: https://lore.kernel.org/20260428013402.115171-11-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Brendan Higgins <brendan.higgins@linux.dev>
Cc: David Hildenbrand <david@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Liam R. Howlett <liam@infradead.org>
Cc: Lorenzo Stoakes <ljs@kernel.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Extend _damon_sysfs.py for DAMOS action failed regions quota charge ratio
setup, so that we can add kselftest for the new feature.
Link: https://lore.kernel.org/20260428013402.115171-10-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Brendan Higgins <brendan.higgins@linux.dev>
Cc: David Hildenbrand <david@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Liam R. Howlett <liam@infradead.org>
Cc: Lorenzo Stoakes <ljs@kernel.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Extend the near-full DAMON parameters commit selftest to commit goal_tuner
and confirm the internal status is updated as expected.
Link: https://lkml.kernel.org/r/20260310010529.91162-12-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Update drgn_dump_damon_status.py, which is being used to dump the
in-kernel DAMON status for tests, to dump goal_tuner setup status.
Link: https://lkml.kernel.org/r/20260310010529.91162-11-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Add support of goal_tuner setup to the test-purpose DAMON sysfs interface
control helper, _damon_sysfs.py.
Link: https://lkml.kernel.org/r/20260310010529.91162-10-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
CONFIG_DAMON_DEBUG_SANITY is recommended for DAMON development and test
setups. Enable it on the build config for DAMON selftests.
Link: https://lkml.kernel.org/r/20260306152914.86303-11-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Brendan Higgins <brendan.higgins@linux.dev>
Cc: David Gow <davidgow@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When the test fails, it shows whole sampled working set size measurements.
The purpose is showing the distribution of the measured values, to let
the tester know if it was just intermittent failure. Multiple same values
on the output are therefore unnecessary. It was not a big deal since the
test was failing only once in the past. But the test can now fail
multiple times with increased working set size, until it passes or the
working set size reaches a limit. Hence the noisy output can be quite
long and annoying. Print only the deduplicated distribution information.
Link: https://lkml.kernel.org/r/20260117020731.226785-6-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
DAMON selftest for working set size estimation collects DAMON's working
set size measurements of the running artificial memory access generator
program until the program is finished. Depending on how quickly the
program finishes, and how quickly DAMON starts, the number of collected
working set size measurements may vary, and make the test results
unreliable. Ensure it collects 40 measurements by using the repeat mode
of the artificial memory access generator program, and finish the
measurements only after the desired number of collections are made.
Link: https://lkml.kernel.org/r/20260117020731.226785-5-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
'access_memory' is an artificial memory access generator program that is
used for a few DAMON selftests. It accesses a given number of regions one
by one only once, and exits. Depending on systems, the test workload may
exit faster than expected, making the tests unreliable. For reliable
control of the artificial memory access pattern, add a mode to make it
repeat running.
Link: https://lkml.kernel.org/r/20260117020731.226785-4-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
DAMON reads and writes Accessed bits of page tables without manual TLB
flush for two reasons. First, it minimizes the overhead. Second, real
systems that need DAMON are expected to be memory intensive enough to
cause periodic TLB flushes. For test setups that use small test
workloads, however, the system's TLB could be big enough to cover whole or
most accesses of the test workload. In this case, no page table walk
happens and DAMON cannot show any access from the test workload.
The test workload for DAMON's working set size estimation selftest is such
a case. It accesses only 10 MiB working set, and it turned out there are
test setups that have TLBs large enough to cover the 10 MiB data accesses.
As a result, the test fails depending on the test machine.
Make it more reliable by trying larger working sets up to 160 MiB when it
fails.
Link: https://lkml.kernel.org/r/20260117020731.226785-3-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "selftests/damon: improve leak detection and wss estimation
reliability".
Two DAMON selftets, namely 'sysfs_memcg_leak' and
'sysfs_update_schemes_tried_regions_wss_estimation' frequently show
intermittent failures due to their unreliable leak detection and working
set size estimation. Make those more reliable.
This patch (of 5):
sysfs_memcg_path_leak.sh determines if the memory leak has happened by
seeing if Slab size on /proc/meminfo increases more than expected after an
action. Depending on the system and background workloads, the reasonable
expectation varies. For the reason, the test frequently shows
intermittent failures. Use kmemleak, which is much more reliable and
correct, instead.
Link: https://lkml.kernel.org/r/20260117020731.226785-1-sj@kernel.org
Link: https://lkml.kernel.org/r/20260117020731.226785-2-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
For each test case, sysfs.py makes changes to DAMON, dumps DAMON internal
status and asserts the expectation is met. The dumping part should be the
same for all cases, so it is duplicated for each test case. Which means
it is easy to make mistakes. Actually a few of those duplicates are not
turning DAMON off in case of the dumping failure. It makes following
selftests that need to turn DAMON on fails with -EBUSY. Merge the status
dumping into commitment assertion with proper dumping failure handling, to
deduplicate and avoid the unnecessary following tests failures.
Link: https://lkml.kernel.org/r/20251112154114.66053-8-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Bill Wendling <morbo@google.com>
Cc: Brendan Higgins <brendan.higgins@linux.dev>
Cc: David Gow <davidgow@google.com>
Cc: David Hildenbrand <david@kernel.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Justin Stitt <justinstitt@google.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
DAMOS filters that are handled by the ops layer are linked to
damos->ops_filters. Owing to the ops_ prefix on the name, it is easy to
understand it is for ops layer handled filters. The other types of
filters, which are handled by the core layer, are linked to
damos->filters. Because of the name, it is easy to confuse the list is
there for not only core layer handled ones but all filters. Avoid such
confusions by renaming the field to core_filters.
Link: https://lkml.kernel.org/r/20251112154114.66053-3-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Bill Wendling <morbo@google.com>
Cc: Brendan Higgins <brendan.higgins@linux.dev>
Cc: David Gow <davidgow@google.com>
Cc: David Hildenbrand <david@kernel.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Justin Stitt <justinstitt@google.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
A new DAMON sysfs file for pin-point target removal, namely
obsolete_target, has been added. Add a test for the functionality. It
starts DAMON with three monitoring target processes, mark one in the
middle as obsolete, commit it, and confirm the internal DAMON status is
updated to remove the target in the middle.
Link: https://lkml.kernel.org/r/20251023012535.69625-10-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Bijan Tabatabai <bijan311@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
assert_ctx_committed() is not asserting monitoring targets commitment,
since all existing callers of the function assume no target changes.
Extend it for future usage.
Link: https://lkml.kernel.org/r/20251023012535.69625-9-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Bijan Tabatabai <bijan311@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
A new field of damon_target for pin-point target removal, namely obsolete,
has newly been added. Extend drgn_dump_damon_status.py to dump it, for
easily writing a future DAMON selftests of it.
Link: https://lkml.kernel.org/r/20251023012535.69625-8-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Bijan Tabatabai <bijan311@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
A DAMON sysfs file, namely obsolete_target, has been newly introduced.
Add a support of that file to _damon_sysfs.py so that DAMON selftests for
the file can be easily written.
Link: https://lkml.kernel.org/r/20251023012535.69625-7-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Bijan Tabatabai <bijan311@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Since the time.h header file is not actually needed in this code, we can
safely remove its inclusion.
Link: https://lkml.kernel.org/r/20250814125417.659937-1-lienze@kylinos.cn
Signed-off-by: Enze Li <lienze@kylinos.cn>
Reviewed-by: SeongJae Park <sj@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
_common.sh was recently introduced but is not installed and then triggers
an error when trying to run the damon selftests:
selftests: damon: sysfs.sh
./sysfs.sh: line 4: _common.sh: No such file or directory
Install this file to avoid this error.
Link: https://lkml.kernel.org/r/20250812-alex-fixes_manual-v1-1-c4e99b1f80e4@rivosinc.com
Fixes: 511914506d19 ("selftests/damon: introduce _common.sh to host shared function")
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Tested-by: Sang-Heon Jeon <ekffu200098@gmail.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Tested-by: Enze Li <lienze@kylinos.cn>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Add test to verify that DAMON status is not changed after a no-op commit.
[ekffu200098@gmail.com: change wrong json.dump usage to json.dumps]
Link: https://lkml.kernel.org/r/20250816014033.190451-1-ekffu200098@gmail.com
Link: https://lkml.kernel.org/r/20250810124354.16456-1-ekffu200098@gmail.com
Signed-off-by: Sang-Heon Jeon <ekffu200098@gmail.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Cc: Honggyu Kim <honggyu.kim@sk.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
drgn_dump_damon_status is not installed during kselftest setup. It can
break other tests which depend on drgn_dump_damon_status. Install
drgn_dump_damon_status files to fix broken test.
Link: https://lkml.kernel.org/r/20250812140046.660486-1-ekffu200098@gmail.com
Fixes: f3e8e1e51362 ("selftests/damon: add drgn script for extracting damon status")
Signed-off-by: Sang-Heon Jeon <ekffu200098@gmail.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Cc: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: Honggyu Kim <honggyu.kim@sk.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The current test scripts contain duplicated root permission checks in
multiple locations. This patch consolidates these checks into _common.sh
to eliminate code redundancy.
Link: https://lkml.kernel.org/r/20250718064217.299300-1-lienze@kylinos.cn
Signed-off-by: Enze Li <lienze@kylinos.cn>
Reviewed-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
sysfs.py is testing if non-default additional parameters can be committed.
Add a test case for further reducing the parameters to the default set.
Link: https://lkml.kernel.org/r/20250720171652.92309-23-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
sysfs.py is testing only the default and minimum DAMON parameters. Add
another test case for more non-default additional DAMON parameters
commitment on runtime.
Link: https://lkml.kernel.org/r/20250720171652.92309-22-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
DAMON context commitment assertion is hard-coded for a specific test case.
Split it out into a general version that can be reused for different test
cases.
Link: https://lkml.kernel.org/r/20250720171652.92309-21-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
DAMON monitoring attributes commitment assertion is hard-coded for a
specific test case. Split it out into a general version that can be
reused for different test cases.
Link: https://lkml.kernel.org/r/20250720171652.92309-20-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
DAMOS schemes commitment assertion is hard-coded for a specific test case.
Split it out into a general version that can be reused for different test
cases.
Link: https://lkml.kernel.org/r/20250720171652.92309-19-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Current DAMOS scheme commitment assertion is not testing DAMOS filters.
Add the test.
Link: https://lkml.kernel.org/r/20250720171652.92309-18-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
DAMOS scheme commitment assertion is hard-coded for a specific test case.
Split it out into a general version that can be reused for different test
cases.
Link: https://lkml.kernel.org/r/20250720171652.92309-17-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Current DAMOS commitment assertion is not testing quota destinations
commitment. Add the test.
Link: https://lkml.kernel.org/r/20250720171652.92309-16-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Current DAMOS quota commitment assertion is not testing quota goal
commitment. Add the test.
Link: https://lkml.kernel.org/r/20250720171652.92309-15-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
DamosQuota commitment assertion is hard-coded for a specific test case.
Split it out into a general version that can be reused for different test
cases.
Link: https://lkml.kernel.org/r/20250720171652.92309-14-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
DamosWatermarks commitment assertion is hard-coded for a specific test
case. Split it out into a general version that can be reused for
different test cases.
Link: https://lkml.kernel.org/r/20250720171652.92309-13-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
drgn_dump_damon_status.py is a script for dumping DAMON internal status in
json format. It is being used for seeing if DAMON parameters that are set
using _damon_sysfs.py are actually passed to DAMON in the kernel space.
It is, however, not dumping full DAMON internal status, and it makes
increasing test coverage difficult. Add damos filters dumping for more
tests.
Link: https://lkml.kernel.org/r/20250720171652.92309-12-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
drgn_dump_damon_status.py is a script for dumping DAMON internal status in
json format. It is being used for seeing if DAMON parameters that are set
using _damon_sysfs.py are actually passed to DAMON in the kernel space.
It is, however, not dumping full DAMON internal status, and it makes
increasing test coverage difficult. Add ctx->ops.id dumping for more
tests.
Link: https://lkml.kernel.org/r/20250720171652.92309-11-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
drgn_dump_damon_status.py is a script for dumping DAMON internal status in
json format. It is being used for seeing if DAMON parameters that are set
using _damon_sysfs.py are actually passed to DAMON in the kernel space.
It is, however, not dumping full DAMON internal status, and it makes
increasing test coverage difficult. Add damos->migrate_dests dumping for
more tests.
Link: https://lkml.kernel.org/r/20250720171652.92309-10-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
nr_accesses and age are unsigned int. Use the proper max value.
Link: https://lkml.kernel.org/r/20250720171652.92309-9-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
_damon_sysfs.py contains code for test-purpose DAMON sysfs interface
control. Add support of DAMOS action destination target_nid setup for
more tests.
Link: https://lkml.kernel.org/r/20250720171652.92309-8-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
_damon_sysfs.py contains code for test-purpose DAMON sysfs interface
control. Add support of DAMOS action destinations setup for more tests.
Link: https://lkml.kernel.org/r/20250720171652.92309-7-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
