| Age | Commit message (Collapse) | Author |
|---|
|
Add a testcase for multiple fprobe events on the same function
so that it clears ftrace hash map correctly when removing the
events.
Link: https://lore.kernel.org/all/177669370353.132053.16801520791509406141.stgit@mhiramat.tok.corp.google.com/
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
|
|
Add a testcase for fprobe events on module, which unloads a kernel
module on which fprobe events are probing and ensure the ftrace
hash map is cleared correctly.
Link: https://lore.kernel.org/all/177669369564.132053.623527664540176496.stgit@mhiramat.tok.corp.google.com/
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing updates from Steven Rostedt:
- Fix printf format warning for bprintf
sunrpc uses a trace_printk() that triggers a printf warning during
the compile. Move the __printf() attribute around for when debugging
is not enabled the warning will go away
- Remove redundant check for EVENT_FILE_FL_FREED in
event_filter_write()
The FREED flag is checked in the call to event_file_file() and then
checked again right afterward, which is unneeded
- Clean up event_file_file() and event_file_data() helpers
These helper functions played a different role in the past, but now
with eventfs, the READ_ONCE() isn't needed. Simplify the code a bit
and also add a warning to event_file_data() if the file or its data
is not present
- Remove updating file->private_data in tracing open
All access to the file private data is handled by the helper
functions, which do not use file->private_data. Stop updating it on
open
- Show ENUM names in function arguments via BTF in function tracing
When showing the function arguments when func-args option is set for
function tracing, if one of the arguments is found to be an enum,
show the name of the enum instead of its number
- Add new trace_call__##name() API for tracepoints
Tracepoints are enabled via static_branch() blocks, where when not
enabled, there's only a nop that is in the code where the execution
will just skip over it. When tracing is enabled, the nop is converted
to a direct jump to the tracepoint code. Sometimes more calculations
are required to be performed to update the parameters of the
tracepoint. In this case, trace_##name##_enabled() is called which is
a static_branch() that gets enabled only when the tracepoint is
enabled. This allows the extra calculations to also be skipped by the
nop:
if (trace_foo_enabled()) {
x = bar();
trace_foo(x);
}
Where the x=bar() is only performed when foo is enabled. The problem
with this approach is that there's now two static_branch() calls. One
for checking if the tracepoint is enabled, and then again to know if
the tracepoint should be called. The second one is redundant
Introduce trace_call__foo() that will call the foo() tracepoint
directly without doing a static_branch():
if (trace_foo_enabled()) {
x = bar();
trace_call__foo();
}
- Update various locations to use the new trace_call__##name() API
- Move snapshot code out of trace.c
Cleaning up trace.c to not be a "dump all", move the snapshot code
out of it and into a new trace_snapshot.c file
- Clean up some "%*.s" to "%*s"
- Allow boot kernel command line options to be called multiple times
Have options like:
ftrace_filter=foo ftrace_filter=bar ftrace_filter=zoo
Equal to:
ftrace_filter=foo,bar,zoo
- Fix ipi_raise event CPU field to be a CPU field
The ipi_raise target_cpus field is defined as a __bitmask(). There is
now a __cpumask() field definition. Update the field to use that
- Have hist_field_name() use a snprintf() and not a series of strcat()
It's safer to use snprintf() that a series of strcat()
- Fix tracepoint regfunc balancing
A tracepoint can define a "reg" and "unreg" function that gets called
before the tracepoint is enabled, and after it is disabled
respectively. But on error, after the "reg" func is called and the
tracepoint is not enabled, the "unreg" function is not called to tear
down what the "reg" function performed
- Fix output that shows what histograms are enabled
Event variables are displayed incorrectly in the histogram output
Instead of "sched.sched_wakeup.$var", it is showing
"$sched.sched_wakeup.var" where the '$' is in the incorrect location
- Some other simple cleanups
* tag 'trace-v7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (24 commits)
selftests/ftrace: Add test case for fully-qualified variable references
tracing: Fix fully-qualified variable reference printing in histograms
tracepoint: balance regfunc() on func_add() failure in tracepoint_add_func()
tracing: Rebuild full_name on each hist_field_name() call
tracing: Report ipi_raise target CPUs as cpumask
tracing: Remove duplicate latency_fsnotify() stub
tracing: Preserve repeated trace_trigger boot parameters
tracing: Append repeated boot-time tracing parameters
tracing: Remove spurious default precision from show_event_trigger/filter formats
cpufreq: Use trace_call__##name() at guarded tracepoint call sites
tracing: Remove tracing_alloc_snapshot() when snapshot isn't defined
tracing: Move snapshot code out of trace.c and into trace_snapshot.c
mm: damon: Use trace_call__##name() at guarded tracepoint call sites
btrfs: Use trace_call__##name() at guarded tracepoint call sites
spi: Use trace_call__##name() at guarded tracepoint call sites
i2c: Use trace_call__##name() at guarded tracepoint call sites
kernel: Use trace_call__##name() at guarded tracepoint call sites
tracepoint: Add trace_call__##name() API
tracing: trace_mmap.h: fix a kernel-doc warning
tracing: Pretty-print enum parameters in function arguments
...
|
|
Pull kvm updates from Paolo Bonzini:
"Arm:
- Add support for tracing in the standalone EL2 hypervisor code,
which should help both debugging and performance analysis. This
uses the new infrastructure for 'remote' trace buffers that can be
exposed by non-kernel entities such as firmware, and which came
through the tracing tree
- Add support for GICv5 Per Processor Interrupts (PPIs), as the
starting point for supporting the new GIC architecture in KVM
- Finally add support for pKVM protected guests, where pages are
unmapped from the host as they are faulted into the guest and can
be shared back from the guest using pKVM hypercalls. Protected
guests are created using a new machine type identifier. As the
elusive guestmem has not yet delivered on its promises, anonymous
memory is also supported
This is only a first step towards full isolation from the host; for
example, the CPU register state and DMA accesses are not yet
isolated. Because this does not really yet bring fully what it
promises, it is hidden behind CONFIG_ARM_PKVM_GUEST +
'kvm-arm.mode=protected', and also triggers TAINT_USER when a VM is
created. Caveat emptor
- Rework the dreaded user_mem_abort() function to make it more
maintainable, reducing the amount of state being exposed to the
various helpers and rendering a substantial amount of state
immutable
- Expand the Stage-2 page table dumper to support NV shadow page
tables on a per-VM basis
- Tidy up the pKVM PSCI proxy code to be slightly less hard to
follow
- Fix both SPE and TRBE in non-VHE configurations so that they do not
generate spurious, out of context table walks that ultimately lead
to very bad HW lockups
- A small set of patches fixing the Stage-2 MMU freeing in error
cases
- Tighten-up accepted SMC immediate value to be only #0 for host
SMCCC calls
- The usual cleanups and other selftest churn
LoongArch:
- Use CSR_CRMD_PLV for kvm_arch_vcpu_in_kernel()
- Add DMSINTC irqchip in kernel support
RISC-V:
- Fix steal time shared memory alignment checks
- Fix vector context allocation leak
- Fix array out-of-bounds in pmu_ctr_read() and pmu_fw_ctr_read_hi()
- Fix double-free of sdata in kvm_pmu_clear_snapshot_area()
- Fix integer overflow in kvm_pmu_validate_counter_mask()
- Fix shift-out-of-bounds in make_xfence_request()
- Fix lost write protection on huge pages during dirty logging
- Split huge pages during fault handling for dirty logging
- Skip CSR restore if VCPU is reloaded on the same core
- Implement kvm_arch_has_default_irqchip() for KVM selftests
- Factored-out ISA checks into separate sources
- Added hideleg to struct kvm_vcpu_config
- Factored-out VCPU config into separate sources
- Support configuration of per-VM HGATP mode from KVM user space
s390:
- Support for ESA (31-bit) guests inside nested hypervisors
- Remove restriction on memslot alignment, which is not needed
anymore with the new gmap code
- Fix LPSW/E to update the bear (which of course is the breaking
event address register)
x86:
- Shut up various UBSAN warnings on reading module parameter before
they were initialized
- Don't zero-allocate page tables that are used for splitting
hugepages in the TDP MMU, as KVM is guaranteed to set all SPTEs in
the page table and thus write all bytes
- As an optimization, bail early when trying to unsync 4KiB mappings
if the target gfn can just be mapped with a 2MiB hugepage
x86 generic:
- Copy single-chunk MMIO write values into struct kvm_vcpu (more
precisely struct kvm_mmio_fragment) to fix use-after-free stack
bugs where KVM would dereference stack pointer after an exit to
userspace
- Clean up and comment the emulated MMIO code to try to make it
easier to maintain (not necessarily "easy", but "easier")
- Move VMXON+VMXOFF and EFER.SVME toggling out of KVM (not *all* of
VMX and SVM enabling) as it is needed for trusted I/O
- Advertise support for AVX512 Bit Matrix Multiply (BMM) instructions
- Immediately fail the build if a required #define is missing in one
of KVM's headers that is included multiple times
- Reject SET_GUEST_DEBUG with -EBUSY if there's an already injected
exception, mostly to prevent syzkaller from abusing the uAPI to
trigger WARNs, but also because it can help prevent userspace from
unintentionally crashing the VM
- Exempt SMM from CPUID faulting on Intel, as per the spec
- Misc hardening and cleanup changes
x86 (AMD):
- Fix and optimize IRQ window inhibit handling for AVIC; make it
per-vCPU so that KVM doesn't prematurely re-enable AVIC if multiple
vCPUs have to-be-injected IRQs
- Clean up and optimize the OSVW handling, avoiding a bug in which
KVM would overwrite state when enabling virtualization on multiple
CPUs in parallel. This should not be a problem because OSVW should
usually be the same for all CPUs
- Drop a WARN in KVM_MEMORY_ENCRYPT_REG_REGION where KVM complains
about a "too large" size based purely on user input
- Clean up and harden the pinning code for KVM_MEMORY_ENCRYPT_REG_REGION
- Disallow synchronizing a VMSA of an already-launched/encrypted
vCPU, as doing so for an SNP guest will crash the host due to an
RMP violation page fault
- Overhaul KVM's APIs for detecting SEV+ guests so that VM-scoped
queries are required to hold kvm->lock, and enforce it by lockdep.
Fix various bugs where sev_guest() was not ensured to be stable for
the whole duration of a function or ioctl
- Convert a pile of kvm->lock SEV code to guard()
- Play nicer with userspace that does not enable
KVM_CAP_EXCEPTION_PAYLOAD, for which KVM needs to set CR2 and DR6
as a response to ioctls such as KVM_GET_VCPU_EVENTS (even if the
payload would end up in EXITINFO2 rather than CR2, for example).
Only set CR2 and DR6 when consumption of the payload is imminent,
but on the other hand force delivery of the payload in all paths
where userspace retrieves CR2 or DR6
- Use vcpu->arch.cr2 when updating vmcb12's CR2 on nested #VMEXIT
instead of vmcb02->save.cr2. The value is out of sync after a
save/restore or after a #PF is injected into L2
- Fix a class of nSVM bugs where some fields written by the CPU are
not synchronized from vmcb02 to cached vmcb12 after VMRUN, and so
are not up-to-date when saved by KVM_GET_NESTED_STATE
- Fix a class of bugs where the ordering between KVM_SET_NESTED_STATE
and KVM_SET_{S}REGS could cause vmcb02 to be incorrectly
initialized after save+restore
- Add a variety of missing nSVM consistency checks
- Fix several bugs where KVM failed to correctly update VMCB fields
on nested #VMEXIT
- Fix several bugs where KVM failed to correctly synthesize #UD or
#GP for SVM-related instructions
- Add support for save+restore of virtualized LBRs (on SVM)
- Refactor various helpers and macros to improve clarity and
(hopefully) make the code easier to maintain
- Aggressively sanitize fields when copying from vmcb12, to guard
against unintentionally allowing L1 to utilize yet-to-be-defined
features
- Fix several bugs where KVM botched rAX legality checks when
emulating SVM instructions. There are remaining issues in that KVM
doesn't handle size prefix overrides for 64-bit guests
- Fail emulation of VMRUN/VMLOAD/VMSAVE if mapping vmcb12 fails
instead of somewhat arbitrarily synthesizing #GP (i.e. don't double
down on AMD's architectural but sketchy behavior of generating #GP
for "unsupported" addresses)
- Cache all used vmcb12 fields to further harden against TOCTOU bugs
x86 (Intel):
- Drop obsolete branch hint prefixes from the VMX instruction macros
- Use ASM_INPUT_RM() in __vmcs_writel() to coerce clang into using a
register input when appropriate
- Code cleanups
guest_memfd:
- Don't mark guest_memfd folios as accessed, as guest_memfd doesn't
support reclaim, the memory is unevictable, and there is no storage
to write back to
LoongArch selftests:
- Add KVM PMU test cases
s390 selftests:
- Enable more memory selftests
x86 selftests:
- Add support for Hygon CPUs in KVM selftests
- Fix a bug in the MSR test where it would get false failures on
AMD/Hygon CPUs with exactly one of RDPID or RDTSCP
- Add an MADV_COLLAPSE testcase for guest_memfd as a regression test
for a bug where the kernel would attempt to collapse guest_memfd
folios against KVM's will"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (373 commits)
KVM: x86: use inlines instead of macros for is_sev_*guest
x86/virt: Treat SVM as unsupported when running as an SEV+ guest
KVM: SEV: Goto an existing error label if charging misc_cg for an ASID fails
KVM: SVM: Move lock-protected allocation of SEV ASID into a separate helper
KVM: SEV: use mutex guard in snp_handle_guest_req()
KVM: SEV: use mutex guard in sev_mem_enc_unregister_region()
KVM: SEV: use mutex guard in sev_mem_enc_ioctl()
KVM: SEV: use mutex guard in snp_launch_update()
KVM: SEV: Assert that kvm->lock is held when querying SEV+ support
KVM: SEV: Document that checking for SEV+ guests when reclaiming memory is "safe"
KVM: SEV: Hide "struct kvm_sev_info" behind CONFIG_KVM_AMD_SEV=y
KVM: SEV: WARN on unhandled VM type when initializing VM
KVM: LoongArch: selftests: Add PMU overflow interrupt test
KVM: LoongArch: selftests: Add basic PMU event counting test
KVM: LoongArch: selftests: Add cpucfg read/write helpers
LoongArch: KVM: Add DMSINTC inject msi to vCPU
LoongArch: KVM: Add DMSINTC device support
LoongArch: KVM: Make vcpu_is_preempted() as a macro rather than function
LoongArch: KVM: Move host CSR_GSTAT save and restore in context switch
LoongArch: KVM: Move host CSR_EENTRY save and restore in context switch
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull ring-buffer updates from Steven Rostedt:
- Add remote buffers for pKVM
pKVM has a hypervisor component that is used to protect the guest
from the host kernel. This hypervisor is a black box to the kernel as
the kernel is to user space. The remote buffers are used to have a
memory mapping between the hypervisor and the kernel where kernel may
send commands to enable tracing within the hypervisor. Then the
kernel will read this memory mapping just like user space can read
the memory mapped ring buffer of the kernel tracing system.
Since the hypervisor only has a single context, it doesn't need to
worry about races between normal context, interrupt context and NMIs
like the kernel does. The ring buffer it uses doesn't need to be as
complex. The remote buffers are a simple version of the ring buffer
that works in a single context. They are still per-CPU and use sub
buffers. The data layout is the same as the kernel's ring buffer to
share the same parsing.
Currently, only ARM64 implements pKVM, but there's work to implement
it also in x86. The remote buffer code is separated out from the ARM
implementation so that it can be used in the future by x86.
The ARM64 updates for pKVM is in the ARM/KVM tree and it merged in
the remote buffers of this tree.
- Make the backup instance non reusable
The backup instance is a copy of the persistent ring buffer so that
the persistent ring buffer could start recording again without using
the data from the previous boot. The backup isn't for normal tracing.
It is made read-only, and after it is consumed, it is automatically
removed.
- Have backup copy persistent instance before it starts recording
To allow the persistent ring buffer to start recording from the
kernel command line commands, move the copy of the backup instance to
before the the command line options start recording.
- Report header_page overwrite field as "char" and not "int'
The rust parser of the header_page file was triggering a warning when
it defined the overwrite variable as "int" but it was only a single
byte in size.
- Fix memory barriers for the trace_buffer CPU mask
When a CPU comes online, the bit is set to allow readers to know that
the CPU buffer is allocated. The bit is set after the allocation is
done, and a smp_wmb() is performed after the allocation and before
the setting of the bit. But instead of adding a smp_rmb() to all
readers, since once a buffer is created for a CPU it is not deleted
if that CPU goes offline, so this allocation is almost always done at
boot up before any readers exist.
If for the unlikely case where a CPU comes online for the first time
after the system boot has finished, send an IPI to all CPUs to force
the smp_rmb() for each CPU.
- Show clock function being used in debugging ring buffer data
When the ring buffer checks are enabled and the ring buffer detects
an inconsistency in the times of the invents, print out the clock
being used when the error occurred. There was a very hard to hit bug
that would happen every so often and it ended up being only triggered
when the jiffies clock was being used. If the bug showed the clock
being used, it would have been much easier to find the problem (which
was an internal function was being traced which caused the clock
accounting to go off).
* tag 'trace-ringbuffer-v7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (26 commits)
ring-buffer: Prevent off-by-one array access in ring_buffer_desc_page()
ring-buffer: Report header_page overwrite as char
tracing: Allow backup to save persistent ring buffer before it starts
tracing/Documentation: Add a section about backup instance
tracing: Remove the backup instance automatically after read
tracing: Make the backup instance non-reusable
ring-buffer: Enforce read ordering of trace_buffer cpumask and buffers
ring-buffer: Show what clock function is used on timestamp errors
tracing: Check for undefined symbols in simple_ring_buffer
tracing: load/unload page callbacks for simple_ring_buffer
Documentation: tracing: Add tracing remotes
tracing: selftests: Add trace remote tests
tracing: Add a trace remote module for testing
tracing: Introduce simple_ring_buffer
ring-buffer: Export buffer_data_page and macros
tracing: Add helpers to create trace remote events
tracing: Add events/ root files to trace remotes
tracing: Add events to trace remotes
tracing: Add init callback to trace remotes
tracing: Add non-consuming read to trace remotes
...
|
|
This test adds a variable (ts0) to two events (sched_waking and
sched_wakeup) and uses a fully-qualified variable reference to expicitly
choose a particular one (sched_wakeup.$ts0) when calculating the wakeup
latency.
Link: https://patch.msgid.link/ce9d96aeb84b2d40bd469fe9a346e225442873b1.1776112478.git.zanussi@kernel.org
Signed-off-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
check_requires() compares requirement strings that can contain shell
pattern characters such as '[' and ']'. Under /bin/sh, the unquoted
test expressions can emit 'unexpected operator' warnings while parsing
README-backed requirements.
Quote the relevant comparisons and path checks so the helper handles
those patterns without spurious shell warnings.
Validated by rerunning fprobe_syntax_errors.tc and confirming the
previous '/bin/sh: unexpected operator' lines disappear from the
detailed ftracetest log.
Signed-off-by: Cao Ruichuang <create0818@163.com>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Link: https://lore.kernel.org/r/20260408043212.8063-1-create0818@163.com
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
The hotplug testing only tries reading a trace remote buffer, loaded
before a CPU is offline. Extend this testing to cover:
* A trace remote buffer loaded after a CPU is offline.
* A trace remote buffer loaded before a CPU is online.
Because of these added test cases, move the hotplug testing into a
separate hotplug.tc file.
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Vincent Donnefort <vdonnefort@google.com>
Link: https://patch.msgid.link/20260401045100.3394299-3-vdonnefort@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Check the awk command supports non POSIX strtonum() function in
the trace_marker_raw test case.
Fixes: 37f46601383a ("selftests/tracing: Add basic test for trace_marker_raw file")
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Link: https://lore.kernel.org/r/177071726229.2369897.11506524546451139051.stgit@mhiramat.tok.corp.google.com
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Since commit a0aa283c53a7 ("selftest/ftrace: Generalise ftracetest to
use with RV") moved the default LOG_DIR setting after --logdir option
parser, it overwrites the user given LOG_DIR.
This fixes it to check the --logdir option parameter when setting new
default LOG_DIR with a new TOP_DIR.
Fixes: a0aa283c53a7 ("selftest/ftrace: Generalise ftracetest to use with RV")
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Tested-by: Gabriele Monaco <gmonaco@redhat.com>
Link: https://lore.kernel.org/r/177071725191.2369897.14781037901532893911.stgit@mhiramat.tok.corp.google.com
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Run the trace remote selftests with the trace remote 'hypervisor', This
trace remote is most likely created when the arm64 KVM nVHE/pKVM
hypervisor is in use.
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: linux-kselftest@vger.kernel.org
Signed-off-by: Vincent Donnefort <vdonnefort@google.com>
Link: https://patch.msgid.link/20260309162516.2623589-31-vdonnefort@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Exercise the tracefs interface for trace remote with a set of tests to
check:
* loading/unloading (unloading.tc)
* reset (reset.tc)
* size changes (buffer_size.tc)
* consuming read (trace_pipe.tc)
* non-consuming read (trace.tc)
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: linux-kselftest@vger.kernel.org
Link: https://patch.msgid.link/20260309162516.2623589-16-vdonnefort@google.com
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Vincent Donnefort <vdonnefort@google.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
When /sys/kernel/tracing/buffer_size_kb is less than 12KB,
the test_multiple_writes test will stall and wait for more
input due to insufficient buffer space.
Check current buffer_size_kb value before the test. If it is
less than 12KB, it temporarily increase the buffer to 12KB,
and restore the original value after the tests are completed.
Link: https://lore.kernel.org/r/20260109033620.25727-1-fushuai.wang@linux.dev
Fixes: 37f46601383a ("selftests/tracing: Add basic test for trace_marker_raw file")
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Fushuai Wang <wangfushuai@baidu.com>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
'available_events' is actually not required by
'test.d/event/toplevel-enable.tc' and its Existence has been tested in
'test.d/00basic/basic4.tc'.
So the require of 'available_events' can be dropped and then we can add
'instance' flag to test 'test.d/event/toplevel-enable.tc' for instance.
Test result show as below:
# ./ftracetest test.d/event/toplevel-enable.tc
=== Ftrace unit tests ===
[1] event tracing - enable/disable with top level files [PASS]
[2] (instance) event tracing - enable/disable with top level files [PASS]
# of passed: 2
# of failed: 0
# of unresolved: 0
# of untested: 0
# of unsupported: 0
# of xfailed: 0
# of undefined(test bug): 0
Link: https://lore.kernel.org/r/20230509203659.1173917-1-zhengyejian1@huawei.com
Signed-off-by: Zheng Yejian <zhengyejian1@huawei.com>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
The func_traceonoff_triggers.tc sometimes goes to fail
on my board, Kunpeng-920.
[root@localhost]# ./ftracetest ./test.d/ftrace/func_traceonoff_triggers.tc -l fail.log
=== Ftrace unit tests ===
[1] ftrace - test for function traceon/off triggers [FAIL]
[2] (instance) ftrace - test for function traceon/off triggers [UNSUPPORTED]
I look up the log, and it shows that the md5sum is different between csum1 and csum2.
++ cnt=611
++ sleep .1
+++ cnt_trace
+++ grep -v '^#' trace
+++ wc -l
++ cnt2=611
++ '[' 611 -ne 611 ']'
+++ cat tracing_on
++ on=0
++ '[' 0 '!=' 0 ']'
+++ md5sum trace
++ csum1='76896aa74362fff66a6a5f3cf8a8a500 trace'
++ sleep .1
+++ md5sum trace
++ csum2='ee8625a21c058818fc26e45c1ed3f6de trace'
++ '[' '76896aa74362fff66a6a5f3cf8a8a500 trace' '!=' 'ee8625a21c058818fc26e45c1ed3f6de trace' ']'
++ fail 'Tracing file is still changing'
++ echo Tracing file is still changing
Tracing file is still changing
++ exit_fail
++ exit 1
So I directly dump the trace file before md5sum, the diff shows that:
[root@localhost]# diff trace_1.log trace_2.log -y --suppress-common-lines
dockerd-12285 [036] d.... 18385.510290: sched_stat | <...>-12285 [036] d.... 18385.510290: sched_stat
dockerd-12285 [036] d.... 18385.510291: sched_swit | <...>-12285 [036] d.... 18385.510291: sched_swit
<...>-740 [044] d.... 18385.602859: sched_stat | kworker/44:1-740 [044] d.... 18385.602859: sched_stat
<...>-740 [044] d.... 18385.602860: sched_swit | kworker/44:1-740 [044] d.... 18385.602860: sched_swit
And we can see that <...> filed be filled with names.
We can strip off the names there to fix that.
After strip off the names:
kworker/u257:0-12 [019] d..2. 2528.758910: sched_stat | -12 [019] d..2. 2528.758910: sched_stat_runtime: comm=k
kworker/u257:0-12 [019] d..2. 2528.758912: sched_swit | -12 [019] d..2. 2528.758912: sched_switch: prev_comm=kw
<idle>-0 [000] d.s5. 2528.762318: sched_waki | -0 [000] d.s5. 2528.762318: sched_waking: comm=sshd pi
<idle>-0 [037] dNh2. 2528.762326: sched_wake | -0 [037] dNh2. 2528.762326: sched_wakeup: comm=sshd pi
<idle>-0 [037] d..2. 2528.762334: sched_swit | -0 [037] d..2. 2528.762334: sched_switch: prev_comm=sw
Link: https://lore.kernel.org/r/20230818013226.2182299-1-zouyipeng@huawei.com
Fixes: d87b29179aa0 ("selftests: ftrace: Use md5sum to take less time of checking logs")
Suggested-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Yipeng Zou <zouyipeng@huawei.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull runtime verifier updates from Steven Rostedt:
- Adapt the ftracetest script to be run from a different folder
This uses the already existing OPT_TEST_DIR but extends it further to
run independent tests, then add an --rv flag to allow using the
script for testing RV (mostly) independently on ftrace.
- Add basic RV selftests in selftests/verification for more validations
Add more validations for available/enabled monitors and reactors.
This could have caught the bug introducing kernel panic solved above.
Tests use ftracetest.
- Convert react() function in reactor to use va_list directly
Use a central helper to handle the variadic arguments. Clean up
macros and mark functions as static.
- Add lockdep annotations to reactors to have lockdep complain of
errors
If the reactors are called from improper context. Useful to develop
new reactors. This highlights a warning in the panic reactor that is
related to the printk subsystem and not to RV.
- Convert core RV code to use lock guards and __free helpers
This completely removes goto statements.
- Fix compilation if !CONFIG_RV_REACTORS
Fix the warning by keeping LTL monitor variable as always static.
* tag 'trace-rv-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
rv: Fix compilation if !CONFIG_RV_REACTORS
rv: Convert to use __free
rv: Convert to use lock guard
rv: Add explicit lockdep context for reactors
rv: Make rv_reacting_on() static
rv: Pass va_list to reactors
selftests/verification: Add initial RV tests
selftest/ftrace: Generalise ftracetest to use with RV
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest updates from Shuah Khan:
- Add basic test for trace_marker_raw file to tracing selftest
- Fix invalid array access in printf dma_map_benchmark selftest
- Add tprobe enable/disable testcase to tracing selftest
- Update fprobe selftest for ftrace based fprobe
* tag 'linux_kselftest-next-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests: tracing: Update fprobe selftest for ftrace based fprobe
selftests: tracing: Add tprobe enable/disable testcase
selftests/run_kselftest.sh: exit with error if tests fail
selftests/dma: fix invalid array access in printf
selftests/tracing: Add basic test for trace_marker_raw file
|
|
Since the ftrace fprobe is both fgraph and ftrace based implemented,
the selftest needs to be updated. This does not count the actual
number of lines, but just check the differences.
Link: https://lore.kernel.org/r/176295318112.431538.11780280333728368327.stgit@devnote2
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Commit 2867495dea86 ("tracing: tprobe-events: Register tracepoint when
enable tprobe event") caused regression bug and tprobe did not work.
To prevent similar problems, add a testcase which enables/disables a
tprobe and check the results.
Link: https://lore.kernel.org/r/176252610176.214996.3978515319000806265.stgit@devnote2
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
The ftracetest script is a fairly complete test framework for tracefs-like
subsystem, but it can only be used for ftrace selftests.
If OPT_TEST_DIR is provided and includes a function file, use that as
test directory going forward rather than just grabbing tests from it.
Generalise function names like initialize_ftrace to initialize_system.
Add the --rv argument to set up the test for rv, basically changing the
trace directory to $TRACING_DIR/rv and displaying an error if that
cannot be found.
This prepares for rv selftests inclusion.
Link: https://lore.kernel.org/r/20251017115203.140080-2-gmonaco@redhat.com
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
|
|
The tracing selftest "event-filter-function.tc" was failing because it
first runs the "sample_events" function that triggers the kmem_cache_free
event and it looks at what function was used during a call to "ls".
But the first time it calls this, it could trigger events that are used to
pull pages into the page cache.
The rest of the test uses the function it finds during that call to see if
it will be called in subsequent "sample_events" calls. But if there's no
need to pull pages into the page cache, it will not trigger that function
and the test will fail.
Call the "sample_events" twice to trigger all the page cache work before
it calls it to find a function to use in subsequent checks.
Cc: stable@vger.kernel.org
Fixes: eb50d0f250e96 ("selftests/ftrace: Choose target function for filter test from samples")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Commit 64cf7d058a00 ("tracing: Have trace_marker use per-cpu data to read
user space") made an update that fixed both trace_marker and
trace_marker_raw. But the small difference made to trace_marker_raw had a
blatant bug in it that any basic testing would have uncovered.
Unfortunately, the self tests have tests for trace_marker but nothing for
trace_marker_raw which allowed the bug to get upstream.
Add basic selftests to test trace_marker_raw so that this doesn't happen
again.
Link: https://lore.kernel.org/r/20251014145149.3e3c1033@gandalf.local.home
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull probes updates from Masami Hiramatsu:
"Stack usage reduction for probe events:
- Allocate string buffers from the heap for uprobe, eprobe, kprobe,
and fprobe events to avoid stack overflow
- Allocate traceprobe_parse_context from the heap to prevent
potential stack overflow
- Fix a typo in the above commit
New features for eprobe and tprobe events:
- Add support for arrays in eprobes
- Support multiple tprobes on the same tracepoint
Improve efficiency:
- Register fprobe-events only when it is enabled to reduce overhead
- Register tracepoints for tprobe events only when enabled to resolve
a lock dependency
Code Cleanup:
- Add kerneldoc for traceprobe_parse_event_name() and
__get_insn_slot()
- Sort #include alphabetically in the probes code
- Remove the unused 'mod' field from the tprobe-event
- Clean up the entry-arg storing code in probe-events
Selftest update
- Enable fprobe events before checking enable_functions in selftests"
* tag 'probes-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: trace_fprobe: Fix typo of the semicolon
tracing: Have eprobes handle arrays
tracing: probes: Add a kerneldoc for traceprobe_parse_event_name()
tracing: uprobe-event: Allocate string buffers from heap
tracing: eprobe-event: Allocate string buffers from heap
tracing: kprobe-event: Allocate string buffers from heap
tracing: fprobe-event: Allocate string buffers from heap
tracing: probe: Allocate traceprobe_parse_context from heap
tracing: probes: Sort #include alphabetically
kprobes: Add missing kerneldoc for __get_insn_slot
tracing: tprobe-events: Register tracepoint when enable tprobe event
selftests: tracing: Enable fprobe events before checking enable_functions
tracing: fprobe-events: Register fprobe-events only when it is enabled
tracing: tprobe-events: Support multiple tprobes on the same tracepoint
tracing: tprobe-events: Remove mod field from tprobe-event
tracing: probe-events: Cleanup entry-arg storing code
|
|
The subsystem event test enables all "sched" events and makes sure there's
at least 3 different events in the output. It used to cat the entire trace
file to | wc -l, but on slow machines, that could last a very long time.
To solve that, it was changed to just read the first 100 lines of the
trace file. This can cause false failures as some events repeat so often,
that the 100 lines that are examined could possibly be of only one event.
Instead, create an awk script that looks for 3 different events and will
exit out after it finds them. This will find the 3 events the test looks
for (eventually if it works), and still exit out after the test is
satisfied and not cause slower machines to run forever.
Link: https://lore.kernel.org/r/20250721134212.53c3e140@batman.local.home
Reported-by: Tengda Wu <wutengda@huaweicloud.com>
Closes: https://lore.kernel.org/all/20250710130134.591066-1-wutengda@huaweicloud.com/
Fixes: 1a4ea83a6e67 ("selftests/ftrace: Limit length in subsystem-enable tests")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Since commit c5b6ababd21a ("locking/mutex: implement
mutex_trylock_nested") makes mutex_trylock() as an inlined
function if CONFIG_DEBUG_LOCK_ALLOC=y, we can not use
mutex_trylock() for testing the glob filter of ftrace.
Use mutex_unlock instead.
Link: https://lore.kernel.org/r/175151680309.2149615.9795104805153538717.stgit@mhiramat.tok.corp.google.com
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Since the fprobe is not registered before enabling the fprobe events,
enable_functions is also empty before enabling it. Thus the tests
which checking enable_functions must ensure the event is enabled before
testing the enable_functions.
Link: https://lore.kernel.org/all/174343538009.843280.6583146613234713007.stgit@devnote2/
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
|
|
Poll program is a helper to ftracetest, thus make it a
generic file and remove it from being run as a test.
Currently when executing tests using
$ make run_tests
CC poll
TAP version 13
1..2
# timeout set to 0
# selftests: ftrace: poll
# Error: Polling file is not specified
not ok 1 selftests: ftrace: poll # exit=255
Fix this by using TEST_GEN_FILES to build the 'poll' binary as a helper
rather than as a test.
Fixes: 80c3e28528ff ("selftests/tracing: Add hist poll() support test")
Link: https://lore.kernel.org/r/20250409044632.363285-1-Ayush.jain3@amd.com
Signed-off-by: Ayush Jain <Ayush.jain3@amd.com>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Initialize hash variables in ftrace subops logic
The fix that simplified the ftrace subops logic opened a path where
some variables could be used without being initialized, and done
subtly where the compiler did not catch it. Initialize those
variables to the EMPTY_HASH, which is the default hash.
- Reinitialize the hash pointers after they are freed
Some of the hash pointers in the subop logic were freed but may still
be referenced later. To prevent use-after-free bugs, initialize them
back to the EMPTY_HASH.
- Free the ftrace hashes when they are replaced
The fix that simplified the subops logic updated some hash pointers,
but left the original hash that they were pointing to where they are
no longer used. This caused a memory leak. Free the hashes that are
pointed to by the pointers when they are replaced.
- Fix size initialization of ftrace direct function hash
The ftrace direct function hash used by BPF initialized the hash size
incorrectly. It checked the size of items to a hard coded 32, which
made the hash bit size of 5. The hash size is supposed to be limited
by the bit size of the hash, as the bitmask is allowed to be greater
than 5. Rework the size check to first pass the number of elements to
fls() and then compare that to FTRACE_HASH_MAX_BITS before allocating
the hash.
- Fix format output of ftrace_graph_ent_entry event
The field depth of the ftrace_graph_ent_entry event is of size 4 but
the output showed it as unsigned long and use "%lu". Change it to
unsigned int and use "%u" in the print format that is displayed to
user space.
- Fix the trace event filter on strings
Events can be filtered on numbers or string values. The return value
checked from strncpy_from_kernel_nofault() and
strncpy_from_user_nofault() was used to determine if reading the
strings would fault or not. It would return fault if the value was
non zero, which is basically meant that it was always considering the
read as a fault.
- Add selftest to test trace event string filtering
In order to catch the breakage of the string filtering, add a self
test to make sure that it continues to work.
* tag 'trace-v6.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: selftests: Add testing a user string to filters
tracing: Fix filter string testing
ftrace: Fix type of ftrace_graph_ent_entry.depth
ftrace: fix incorrect hash size in register_ftrace_direct()
ftrace: Free ftrace hashes after they are replaced in the subops code
ftrace: Reinitialize hash to EMPTY_HASH after freeing
ftrace: Initialize variables for ftrace_startup/shutdown_subops()
|
|
Running the following commands was broken:
# cd /sys/kernel/tracing
# echo "filename.ustring ~ \"/proc*\"" > events/syscalls/sys_enter_openat/filter
# echo 1 > events/syscalls/sys_enter_openat/enable
# ls /proc/$$/maps
# cat trace
And would produce nothing when it should have produced something like:
ls-1192 [007] ..... 8169.828333: sys_openat(dfd: ffffffffffffff9c, filename: 7efc18359904, flags: 80000, mode: 0)
Add a test to check this case so that it will be caught if it breaks
again.
Link: https://lore.kernel.org/linux-trace-kernel/20250417183003.505835fb@gandalf.local.home/
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/20250418101208.38dc81f5@gandalf.local.home
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
bash and dash evaluate variables differently.
dash will evaluate '\\' every time it is read whereas bash does not.
TEST_STRING="$TEST_STRING \\$i"
echo $TEST_STRING
With i=123
On bash, that will print "\123"
but on dash, that will print the escape sequence of \123 as the \ will be
interpreted again in the echo.
The dynevent_limitations.tc test created a very large list of arguments to
test the maximum number of arguments to pass to the dynamic events file.
It had a loop of:
TEST_STRING=$1
# Acceptable
for i in `seq 1 $MAX_ARGS`; do
TEST_STRING="$TEST_STRING \\$i"
done
echo "$TEST_STRING" >> dynamic_events
This worked fine on bash, but when run on dash it failed.
This was due to dash interpreting the "\\$i" twice. Once when it was
assigned to TEST_STRING and a second time with the echo $TEST_STRING.
bash does not process the backslash more than the first time.
To solve this, assign a double backslash to a variable "bs" and then echo
it to "ts". If "ts" changes, it is dash, if not, it is bash. Then update
"bs" accordingly, and use that to assign TEST_STRING.
Now this could possibly just check if "$BASH" is defined or not, but this
is testing if the issue exists and not just which shell is being used.
Link: https://lore.kernel.org/r/20250414210900.4de5e8b9@gandalf.local.home
Fixes: 581a7b26ab364 ("selftests/ftrace: Add dynamic events argument limitation test case")
Reported-by: Mark Brown <broonie@kernel.org>
Closes: https://lore.kernel.org/all/350786cc-9e40-4396-ab95-4f10d69122fb@sirena.org.uk/
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
A bug was discovered that showed the accounting of the subops of the
ftrace_ops filtering was incorrect. Add a new test to better test the
filtering.
This test creates two instances, where it will add various filters to both
the set_ftrace_filter and the set_ftrace_notrace files and enable
function_graph. Then it looks into the enabled_functions file to make sure
that the filters are behaving correctly.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Andy Chiu <andybnac@gmail.com>
Link: https://lore.kernel.org/20250409152720.380778379@goodmis.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull probes updates from Masami Hiramatsu:
- probe-events: Add comments about entry data storing code to clarify
where and how the entry data is stored for function return events.
- probe-events: Log error for exceeding the number of arguments to help
user to identify error reason via tracefs/error_log file.
- Improve the ftracetest selftests:
- Expand the tprobe event test to check if it can correctly find the
wrong format tracepoint name.
- Add new syntax error test to check whether error_log correctly
indicates a wrong character in the tracepoint name.
- Add a new dynamic events argument limitation test case which
checks max number of probe arguments.
* tag 'probes-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: probe-events: Add comments about entry data storing code
selftests/ftrace: Add dynamic events argument limitation test case
selftests/ftrace: Add new syntax error test
selftests/ftrace: Expand the tprobe event test to check wrong format
tracing: probe-events: Log error for exceeding the number of arguments
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull Kselftest updates from Shuah Khan:
- Fix bugs and clean up code in tracing, ftrace, and user_events tests
- Add missing executables to ftrace gitignore
* tag 'linux_kselftest-next-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests/ftrace: add 'poll' binary to gitignore
selftests/ftrace: Use readelf to find entry point in uprobe test
selftests/user_events: Fix failures caused by test code
selftests/tracing: Allow some more tests to run in instances
selftests/ftrace: Clean up triggers after setting them
selftests/tracing: Test only toplevel README file not the instances
|
|
Add argument limitation test case for dynamic events.
This is a boudary check for the maximum number of the probe
event arguments.
Link: https://lore.kernel.org/all/174055078295.4079315.14702008939511417359.stgit@mhiramat.tok.corp.google.com/
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
|
|
Add BAD_TP_NAME syntax error message check.
Link: https://lore.kernel.org/all/174055077485.4079315.3624012056141021755.stgit@mhiramat.tok.corp.google.com/
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
|
|
Expand the tprobe event test case to check wrong tracepoint
format.
Link: https://lore.kernel.org/all/174055076681.4079315.16941322116874021804.stgit@mhiramat.tok.corp.google.com/
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
|
|
When building this test, a binary file 'poll' is
generated and should be gitignore'd.
Link: https://lore.kernel.org/r/20250210160138.4745-1-bharadwaj.raju777@gmail.com
Signed-off-by: Bharadwaj Raju <bharadwaj.raju777@gmail.com>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan <shuah@kernel.org>
|
|
The fprobe test fails on Fedora 41 since the fprobe test assumption that
the number of enabled_functions is zero before the test starts is not
necessarily true. Some user space tools, like systemd, add BPF programs
that attach to functions. Those will show up in the enabled_functions table
and must be taken into account by the fprobe test.
Therefore count the number of lines of enabled_functions before tests
start, and use that as base when comparing expected results.
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Link: https://lore.kernel.org/20250226142703.910860-1-hca@linux.ibm.com
Fixes: e85c5e9792b9 ("selftests/ftrace: Update fprobe test to check enabled_functions file")
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
The uprobe events test fails on s390, but also on x86 (Fedora 41). The
problem appears to be that there is an assumption that adding a uprobe to
the beginning of the executable mapping of /bin/sh is sufficient to trigger
a uprobe event when /bin/sh is executed.
This assumption is not necessarily true. Therefore use "readelf -h" to find
the entry point address of /bin/sh and use this address when adding the
uprobe event.
This adds a dependency to readelf which is not always installed. Therefore
add a check and exit with exit_unresolved if it is not installed.
Link: https://lore.kernel.org/r/20250220130102.2079179-1-hca@linux.ibm.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
A few bugs were found in the fprobe accounting logic along with it using
the function graph infrastructure. Update the fprobe selftest to catch
those bugs in case they or something similar shows up in the future.
The test now checks the enabled_functions file which shows all the
functions attached to ftrace or fgraph. When enabling a fprobe, make sure
that its corresponding function is also added to that file. Also add two
more fprobes to enable to make sure that the fprobe logic works properly
with multiple probes.
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Link: https://lore.kernel.org/20250220202055.733001756@goodmis.org
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Tested-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
The tests:
trigger-action-hist-xfail.tc
trigger-onchange-action-hist.tc
trigger-snapshot-action-hist.tc
trigger-hist-expressions.tc
can all run in an instance. Test them in an instance as well.
Link: https://lore.kernel.org/r/20250220185846.451234966@goodmis.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
The triggers set in trigger-onchange-action-hist.tc and
trigger-snapshot-action-hist.tc are not cleaned up at the end. These tests
can also be done in instances and without cleaning up the triggers, the
instances can not be removed as they are still "busy".
Link: https://lore.kernel.org/r/20250220185846.291817731@goodmis.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
For the tests that have both a README attribute as well as the instance
flag to run the tests as an instance, the instance version will always
exit with UNSUPPORTED. That's because the instance directory does not
contain a README file. Currently, the tests check for a README file in the
directory that the test runs in and if there's a requirement for something
to be present in the README file, it will not find it, as the instance
directory doesn't have it.
Have the tests check if the current directory is an instance directory,
and if it is, check two directories above the current directory for the
README file:
/sys/kernel/tracing/README
/sys/kernel/tracing/instances/foo/../../README
Link: https://lore.kernel.org/r/20250220185846.130216270@goodmis.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing updates from Steven Rostedt:
- Cleanup with guard() and free() helpers
There were several places in the code that had a lot of "goto out" in
the error paths to either unlock a lock or free some memory that was
allocated. But this is error prone. Convert the code over to use the
guard() and free() helpers that let the compiler unlock locks or free
memory when the function exits.
- Update the Rust tracepoint code to use the C code too
There was some duplication of the tracepoint code for Rust that did
the same logic as the C code. Add a helper that makes it possible for
both algorithms to use the same logic in one place.
- Add poll to trace event hist files
It is useful to know when an event is triggered, or even with some
filtering. Since hist files of events get updated when active and the
event is triggered, allow applications to poll the hist file and wake
up when an event is triggered. This will let the application know
that the event it is waiting for happened.
- Add :mod: command to enable events for current or future modules
The function tracer already has a way to enable functions to be
traced in modules by writing ":mod:<module>" into set_ftrace_filter.
That will enable either all the functions for the module if it is
loaded, or if it is not, it will cache that command, and when the
module is loaded that matches <module>, its functions will be
enabled. This also allows init functions to be traced. But currently
events do not have that feature.
Add the command where if ':mod:<module>' is written into set_event,
then either all the modules events are enabled if it is loaded, or
cache it so that the module's events are enabled when it is loaded.
This also works from the kernel command line, where
"trace_event=:mod:<module>", when the module is loaded at boot up,
its events will be enabled then.
* tag 'trace-v6.14-3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (26 commits)
tracing: Fix output of set_event for some cached module events
tracing: Fix allocation of printing set_event file content
tracing: Rename update_cache() to update_mod_cache()
tracing: Fix #if CONFIG_MODULES to #ifdef CONFIG_MODULES
selftests/ftrace: Add test that tests event :mod: commands
tracing: Cache ":mod:" events for modules not loaded yet
tracing: Add :mod: command to enabled module events
selftests/tracing: Add hist poll() support test
tracing/hist: Support POLLPRI event for poll on histogram
tracing/hist: Add poll(POLLIN) support on hist file
tracing: Fix using ret variable in tracing_set_tracer()
tracepoint: Reduce duplication of __DO_TRACE_CALL
tracing/string: Create and use __free(argv_free) in trace_dynevent.c
tracing: Switch trace_stat.c code over to use guard()
tracing: Switch trace_stack.c code over to use guard()
tracing: Switch trace_osnoise.c code over to use guard() and __free()
tracing: Switch trace_events_synth.c code over to use guard()
tracing: Switch trace_events_filter.c code over to use guard()
tracing: Switch trace_events_trigger.c code over to use guard()
tracing: Switch trace_events_hist.c code over to use guard()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest updates from Shuah Khan:
- fixes, reporting improvements, and cleanup changes to several tests
- add support for DT_GNU_HASH to selftests/vDSO
* tag 'linux_kselftest-next-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests/rseq: Fix handling of glibc without rseq support
selftests/resctrl: Discover SNC kernel support and adjust messages
selftests/resctrl: Adjust effective L3 cache size with SNC enabled
selftests/ftrace: Make uprobe test more robust against binary name
selftests/ftrace: Fix to use remount when testing mount GID option
selftests: tmpfs: Add kselftest support to tmpfs
selftests: tmpfs: Add Test-skip if not run as root
selftests: harness: fix printing of mismatch values in __EXPECT()
selftests/ring-buffer: Add test for out-of-bound pgoff mapping
selftests/run_kselftest.sh: Fix help string for --per-test-log
selftests: acct: Add ksft_exit_skip if not running as root
selftests: kselftest: Fix the wrong format specifier
selftests: timers: clocksource-switch: Adapt progress to kselftest framework
selftests/zram: gitignore output file
selftests/filesystems: Add missing gitignore file
selftests: Warn about skipped tests in result summary
selftests: kselftest: Add ksft_test_result_xpass
selftests/vDSO: support DT_GNU_HASH
selftests/ipc: Remove unused variables
selftest: media_tests: fix trivial UAF typo
|
|
Now that here's a :mod: command that can be sent into set_event, add a
test that tests its use. Both setting events for a loaded module, as well
as caching what events to set for a module that is not loaded yet.
Cc: Shuah Khan <shuah@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: linux-kselftest@vger.kernel.org
Link: https://lore.kernel.org/20250116143533.819228058@goodmis.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Make add_remove_uprobe test case more robust against various real
binary name.
Current add_remove_uprobe.tc test expects the real binary of /bin/sh
is '*/bin/*sh', but it does not work on busybox environment.
Instead of using fixed pattern, use readlink to identify real binary
name.
Link: https://lore.kernel.org/r/173625187633.1383744.2840679071525852811.stgit@devnote2
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Fix mount_options.tc to use remount option to mount the tracefs.
Since the current implementation does not umount the tracefs,
this test always fails because of -EBUSY error.
Using remount option will allow us to change the mount option.
Link: https://lore.kernel.org/r/173625186741.1383744.16707876180798573039.stgit@devnote2
Fixes: 8b55572e5180 ("tracing/selftests: Add tracefs mount options test")
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Add a testcase for poll() on hist file. This introduces a helper binary
to the ftracetest, because there is no good way to reliably execute
poll() on hist file.
Cc: Shuah Khan <shuah@kernel.org>
Cc: Tom Zanussi <zanussi@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/173547867935.569911.10127126796879854182.stgit@devnote2
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
This test case repeats define and undefine the fprobe dynamic event to
ensure that the fprobe does not cause any issue with such operations.
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Florent Revest <revest@chromium.org>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Cc: bpf <bpf@vger.kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Alan Maguire <alan.maguire@oracle.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/173519009398.391279.4625924605120064761.stgit@devnote2
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
